Local Module (Error-Handler) Failed the verify environment test

When attempting to start the Messaging Server, the following error
message occurs and the server fails to start:

19980226114147:Dispatch:Notification:Local Module (Error-Handler) Failed
the verify environment test.
 Module not Loaded.
 Startup Problem:
 Module Error-Handler is required for proper operation.
 Netscape Messaging Server Exiting!

This problem can be caused by a corruption to the configuration file
for the admin server that controls the Messaging server
(install_dir/admin-serv/ns-admin.conf).
Specifically, if the
Port setting is missing, the above-mentioned error will occur.

Add a valid Port setting to the
ns-admin.conf file and
rerun the /etc/NscpMail start command.

Is anyone having any idea about it...

Similar Messages

"Error 0x800b010a: Failed to verify signature of payload: jre" under Eclipse IDE

Hello,
This error is occurring on a system that kept is off the internet (for security reasons):
Failed authenticode verification of payload: C:\ProgramData\Package Cache\.unverified\jre
... Error 0x800b010a: Failed to verify signature of payload: jre
It is related to certificates. I found a KB that addresses the error when the IDE is VS2013 or VS2012:
https://support.microsoft.com/en-us/kb/2746268?wa=wsignin1.0
But the IDE in use in my case is Eclipse. Does the KB apply?

Hi Rich,
the WSUS forum probably isn't the best place for this, you may have better luck in one of the Eclipse forums.
However I have had to follow the steps
in this to get around similar errors when deploying software in disconnected errors, where root cert updates hadn't been deployed before, so the above may indeed help
If you find the answer of assistance please "Vote as Helpful"and/or "Mark as Answer" where applicable. This helps others to find solutions for there issues, and recognises contributions made to the community :)

Error when generating the text environment

Hi Friends,
When iam logging on to SAPGUI iam able to lauch the gui but no text elements are being displayed the screen is completely blank and when i try to execute any transaction or perform any action.. the following error is getting displayed.
Err:sapgui:620
Error when generating the text Environment.
Please provide me the necessary help.
Regards
Khaiser

Hi,
Just a suggestion (not sure it will work) - upgrade your SAPGui to the latest one e.g. 7.10 or patch it.
Do you see text elements if accessing the sytem using DE language ?
Regards,
Mike

Error while generating the report on Test env (for divide condition)

Hi All,
I am facing the below error while generating the report in test environment while the same report is working fine on Prod environment.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16015] SQL statement execution failed. (HY000)
Actually the error is coming for the below logics:
COUNT(DISTINCT RMA.RMA)/COUNT(DISTINCT User."User Name")
"RMA Fact"."Module Backlog"/COUNT(DISTINCT User."User Name")
Can anyone please tell if I need to make any configuration changes as the same logic works perfectly fine on production but not on test.
Thanks in advance

Is anyone having any idea about it...

Edit locally giving error "Operation Failed"

while edit document locally in KM trough the command "edit locally". After clicking on "edit locally"a digitalized signed applet pops up with run and cancel button.(here applet is being set instead of Active x).I clicked cancelled. It shows the error "operation failed".Doesn't allow me even next time. Showing
How to solve the problems that even though I click the cancel, the next time same applet should popped up

Hello,
i me having the same Issue when i try to edit KM File locally (Excel) -> Operation Failed Error.
please advice how did u solved the Issue?
Thanks and Regards,
Nazih

Error handling in the InDesign SDK

I've almost reached the first milestone on my InDesign project and before I move on I decided to do a code review. One thing that caught my attention are the InDesign smart pointers and how they are used in the SDK samples and some of the open source stuff.
For example, here is some code from AppearancePlaceBehaviourUI.cpp in function GetCursor().
InterfacePtr<IHierarchy> sourceItem(const_cast<AppearancePlaceBehaviorUI*>(this), UseDefaultIID());
InterfacePtr<IHierarchy> parentItem(sourceItem->QueryParent());
InterfacePtr<IPlaceBehavior> parentBehavior(parentItem, UseDefaultIID());
if (parentBehavior == nil)
 InterfacePtr<IHierarchy> sourceContent(sourceItem->GetChildCount() ? sourceItem->QueryChild(0) : nil);
 if (sourceContent)
 InterfacePtr<IPlaceBehaviorUI> sourceBehaviorUI(sourceContent, UseDefaultIID());
 cursor = sourceBehaviorUI->GetCursor(globalLocation, modifiers);
Although the code works under normal circumstances, it strikes me as unsafe code.
sourceItem->QueryParent() is called without first checking that sourceItem is not a NULL pointer.
Functions of the sourceItem object are used again (GetChildCount() and QueryChild()).
The pointer sourceContent is checked before passing it to the constructor of sourceContent.
Function GetCursor() is called without checking if sourceBehaviourUI is not NULL.
For code tidiness pointers should really be tested against nil (i.e. if (ptrSomeObject != nil))
It strikes me as being inconsistent and easy to break - unless that is some of these interfaces are guaranteed to return pointers, in which case is there documentation to state as much? What would happen in the case of an exception such as bad_alloc - are they guaranteed not to throw?
I know that in some places (but not all), the samples use an "exception-style" approach of placing code blocks within a "do while(kFalse)" statement. They check for a NULL pointer and if they find one, break out of the "loop". This approach avoids deep nesting code.
It would be great if Adobe gave a statement stating what their code base will do and won't do (i.e. exception safety). A few definative error handling examples for developers wouldn't go amiss either.

Hi Dirk,
Agreed - I also would like to see more real world source code that explains concepts. It would be good to see samples geared towards operations on a very small set of types (i.e. Libraries, Library Commands) with tutorials explaining what the sample is trying to demonstrate. For example:
Library sample demostrates:
How to open a library.
How to close a library.
How to add items via approach A.
How to add items via approach B.
How to remove an item from a library.
How to remove an item from a library based on a specific criteria.
How to remove all items from a library.
Such samples would also demonstrate Adobe's idea of best practice - consistent code style, comments and error handling.
As Helmut25 posts in his thread "Tutorial for plug-in programming?" it would be good to see more step by step tutorials that don't just do a copy and paste but also explain clearly what is being done and why. You want to get into an Adobe developers head, understand their view of the universe and then apply what you've learned in your own projects.
Back onto error handling...
I've spent many a year doing Win32 programming (via C-style API, not MFC), so I'm used to using GetLastError() to find out why a function failed. Never really had reason to use SetLastError() and by and large avoided it. I think any API has to state what will happen when things go wrong (Microsoft's Win32 documentation is very good at this) and consequently you know how to write your code to account for such things.
One thing I like to do on standalone Win32/C/C++ applications is use a tool called AppVerifier, which allows you to throw various spanners into the works and see how your application copes. Shame there isn't something similar for testing plug-ins. I like to think that if InDesign crashes, it's not down to my code.
Regards,
APMABC

Error "Connection Failed The server may not exist or is not operational..."

This is just FYI in case somebody else runs across this. On one user account, an error window would pop up every so often that said:
Connection Failed
The server may not exist or it is not operational at this time. Check the server name or IP address and try again.
It turns out that the problem was caused by Screen Saver. The error popped up whenever screen saver tried to launch. On the problem account I had the "Pictures" folder selected for the screen saver, and apparently there must be an alias in that folder pointing to something on a remote server, because as soon as I go to System Preferences and open the Screen Saver panel, I get the error.
It has been driving me crazy for months but finally I thought to look in Console, where I saw the error "afp_mount[5045] CFLog (0): CFMessagePort: bootstrap_register(): failed 1103 (0x44f), port = 0x2d03, name = 'com.apple.afp_mount.ServiceProvider'"
Searching for that error led me to the Macosxhints forum at http://forums.macosxhints.com/archive/index.php/t-53209.html where a user had posted the same problem. Changing to a different screen saver or a different folder for pictures resolved the issue.
PowerMac G5 Mac OS X (10.4.6)
PowerMac G5 Mac OS X (10.4.6)

Welcome to discussions leffjay. Good one. Cheers.

JSF error handling when the bean is not correctly loaded

Hi,
I am doing some error handling in JSF and I want to do it in an elegant way. I have the following scenario for error handling.
When the bean is initialized I load the bean with values from DAO which give SQL Exceptions.
Since the bean is not loaded I properly I have to send the user to an error page showing the error message why I am sending the user to this page.
I can do it by [ FacesContext.getCurrentInstance.redirect("/error.jsf") ] doing so I will loose all the FacesMessages that are added by the exceptions.
Instead I want to use the [ FacesContext.getCurrentInstance.dispatch("url") ] which will allow the transfer of the user but I get the following
16:59:39,341 WARN [lifecycle] executePhase(RESTORE_VIEW 1,com.sun.faces.context.FacesContextImpl@8537f9) threw exception
java.lang.ClassCastException: javax.faces.component.UIViewRoot
and the method that I am calling is
public static void programErrorEnd() {
logger.info("in the prgmErrorEnd mehod");
//intializing the contex object
FacesContext ctx = FacesContext.getCurrentInstance();
try {
//ready to dispatch the url.
//ctx.getExternalContext().redirect("app/error/prgmerror.jsf");
ctx.getExternalContext().dispatch("error/prgmerror.jsf");
} catch (IOException e) {
//TODO what to do when there is an error at this stage.
finally {
ctx.responseComplete();
}Thanks and Regarding
Edited by: sgatl2 on Aug 28, 2008 2:32 PM
Edited by: sgatl2 on Aug 28, 2008 2:45 PM

Just let it throw the exception and define an error-page entry in the web.xml which catches the specified exception (or a superclass of it or a HTTP status code) and displays the error.jsf page accordingly.

Error Handling in the SQL Trigger 2008 R2

Hi ,
I need some guidance in setting up error handling process in the table trigger. I have created a trigger on source database table and it load data to target table whenever there are any changes in last update date of source database ( given code below).
Problem : sometime I am getting error message ( like unique Index , data length mismatch etc) and my trigger don’t work and rollback the entire transaction.
Requirement : If there is an error with the insertion, I would like to move that error-inducing record into an error table . Any guidance much appreciate. thanks!
/****** Object: Trigger Defination    ******/
USE [MPSAIntegration]
GO
SET
ANSI_NULLS ON
GO
SET
QUOTED_IDENTIFIER ON
GO
/*Description:    Trigger to insert Asset details into Siebel Table*/
ALTER
TRIGGER [dbo].[trg_INS_INTO_CX_PRODPROF_STG]
ON [MPSAIntegration].[dbo].[CustomerProductLines]
AFTER INSERT,UPDATE
AS
/****** Get the current Timestamp,Max of SR_NUM from Target table and LastRun time from dbo.TIME ******/
DECLARE @currtime
DATETIME,
@SR_NUM
INT,
@Last_Run
DATETIME
SELECT @currtime
= (SELECT
CURRENT_TIMESTAMP)
SELECT @SR_NUM
= (select
max(Sr_Num)
from dbo.SerialNum
WHERE Entity='PROD')
SELECT @Last_Run
= (SELECT LastRun
from [MPSAIntegration].[dbo].[TIME]
where ENTITY =
'PROD')
BEGIN
SET
NOCOUNT ON;
SET
XACT_ABORT ON;
/***** Update dbo.SerialNum Table *****/
UPDATE dbo.SerialNum
SET Sr_Num = @SR_NUM+1
where Entity='PROD';
/***** Insert into [dbo].[CX_PRODPROF_STG] table *****/
INSERT
INTO [ntscrmdbdev].[SiebelDB].[dbo].[CX_PRODPROF_STG]
([ROW_ID]
,[CREATED]
,[CREATED_BY]
,[LAST_UPD]
,[LAST_UPD_BY]
,[MODIFICATION_NUM]
,[CONFLICT_ID]
,[LOAD_STATUS]
,[SR_NUM]
,[INFO_CAPTURE_DATE]
,[ADDRESS_NAME]
,[CUSTOMER_CODE]
,[DESCRIPTION]
,[PRODUCT]
,[SERVER_NAME]
,[STATUS]
,[CANCEL_DATE],
      [SEQUENCE_ID])
SELECT
CAST(CUSTOMERCODE
AS NVARCHAR(8))+CAST(@SR_NUM
AS NVARCHAR(7))
,Current_Timestamp
,'dbo'
,Current_Timestamp
,Current_User
,0
,'N'
,'Not Processed'
,CAST(@SR_NUM
AS NVARCHAR(15))
,InfoCaptureDate
,(SELECT CUST.CUSTOMERNAME
FROM CUSTOMERS CUST where CUST.CustomerCode
= I.CustomerCode)
,CustomerCode
,ProductLine
,ProductLine
,ServerName
,'ACTIVE'
,TerminationDate
,1
FROM INSERTED I
/****** Update the LastRun in dbo.TIME ******/
UPDATE [MPSAIntegration].[dbo].[TIME]
SET LastRun
= @currtime
WHERE ENTITY
= 'PROD';
END

The first choice is stored procedure. Trigger should be last resort.
Related links:
http://stackoverflow.com/questions/884334/tsql-try-catch-transaction-in-trigger
http://www.sqlservercentral.com/Forums/Topic1499938-3077-1.aspx
http://www.sommarskog.se/error-handling-I.html
http://www.codemag.com/Article/0305111
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Error handling in the LVWebUIBuilder

Impressive stuff.
I don't see any error handling mechanisms in the LVWUIB. Are they there, and I'm missing it?
Thanks,
Joe Z.
Solved!
Go to Solution.

Hi Joe,
With the error cluster, you can use the Unbundle Error function (http://zone.ni.com/reference/en-XX/help/373286A-01/uibuilderref/wuib_unbundle_error/).
To add error handling to your subVIs, you need to create error terminals from any function that has error inputs and outputs. Then, select the View tab and click SubVI Settings. From there you can add error in and error out terminals.
You can create error windows using the Display Debug Assert function (http://zone.ni.com/reference/en-XX/help/373286A-01/uibuilderref/wuib_display_debug/):
Note that I have to invert the error boolean to make the dialog pop-up.

Error handling and the resulting messages to the user

Hi all.
I have a question about displaying error messages from custom callback classes.
I've written my own PasswordValidation class, and when the user's password doesn't pass validation, I throw an AMException with the text of the specific reason the password was invalid.
I see this in the stack trace in the identity log files, but in the GUI from Self Reg, all I get is a generic "An error occurred while storing the user profile."
Is there a way to have my specific error message be the one displayed to the user? The generic one doesn't give the user much to go on as far as what needs to be fixed.
I'm using Identity 6.1 on Solaris.
Thank you for your time.
chris

As a followup, if the user account is created via the console, not through self reg, the appropriate error message does appear to the user. So it seems like just Self Reg isn't picking up the error messages from the callback classes.
Thanks!
chris

How to treat error handling in the consumer loop in the queue message handler structure?

Hi,
I'd like to know how to stop the producer loop(event loop) in the QMH structure when the error happened in the consumer loop.
I've construct a demo code by myself as the attached image, but it's a pity that I have to create a recdundant indicator "End" to trigger the value change event to stop the program. This is not a good way to do it. Could someone give me some better idea how to deal with it? Very appreciated to you sharing ideas.

Concerning your doubts about the "traditional" implementation of this pattern, I hear you. As I have written many times before, its main benefit is that it is easy to explain in a training class. It unfortunately has a lot of drawbacks.
Tim's suggestion about User Events, is a good one. But to use it to the best advantage, you will need to get away from having everything on one block diagram. If you think about it there is no real need for the two loops to be on the same block diagram and a lot of really good reasons for them not to be. For example, if they are in separate VIs, they can both be event driven and any communication problems between loops evaporates.
Its also more modular, easier to maintain, more reusable, etc...
Check the link in my signature.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

I have hp 2000-299 wm notebook that failed the hard disk test. what can be done?

Message said: " SMART hard disk error. The SMART hard disk check has detected an immintent failure. To ensure not data loss, please back up the content immediately and run the Hard Disk Test in system diagnostics. Hard Disk 1 (301) F2 System Diagnostics ENTER-continue setup."
I ran the Hard Disk Test and the following message appeared:
"Testing Drive 1
SMART check: passed
Short DST: passed
Long DST: FAILED
Failure ID: UAGF7T-5SP669- MFKR4K-618MO3
Product ID: QE282UA# ABA
Hard disk 1
Hard Disk Test : FAILED
for more info... go to this website

Your notebook hard drive has failed, you need to get it replaced to fix your notebook.
If covered under Warranty, you may contact the HP Tech Support and have them ship you a replacement drive, or else you may purchase a new one.
If you would like to purchase a new Hard Drive, any of the below will work.
500-GB, 5400-rpm Part Number: 634932-001
320-GB, 5400-rpm Part Number: 622643-001(the one shipped with the notebook)
250-GB, 5400-rpm Part Number: 622641-001
You can contact the HP Support Team(Phone, chat, email) from the below link:
http://h10025.www1.hp.com/ewfrf/wc/contacthp?cc=us&dlc=en&lc=en&product=5166284

My device is recognized by itunes but won't sync and failed the sync diagnostic test. I've restarted the computer, reset the ipod . . . nothing works. Any suggestions would be greatly appreciated

iTunes shows the iPod is connected but doesn't show it in the drop down menu under Devices, and the "sync" option is grayed out, so I can't sync the nano with iTunes. I ran the diagnostic tests and it shows the device is connected, but it failed the sync test - it said nothing was connected, even though it passed the connectivity test. We've had the iPod for a few months but this is the first time we've tried to do anything with it. It's fully charged but just won't sync. I turned it off, turned it on. I reset it. I restarted the computer. I'm not sure where to go from here.

A couple of things to check:
Are there any backups listed in iTunes/settings/devices? Since backing up is the first step of the sync process, iTunes might be stuck trying to read the content of the last backup in order to replace it with the new one.
Copy the whole backup folder to a safe place, delete the backup from the list afterwards and make sure that the folder has no content after that. The folder is located here:
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
If you do not see the AppData or Application Data folders, you may need to show hidden files
After that, make sure autosync is disabled in iTunes, connect your ipod, right click on it in the device list and choose "backup". If you can backup manually, transfer your purchases the same way, to copy apps and purchased media to your iTunes. If this worked, you should be able to sync again.
To speed up the sync process, copy your photos to your computer prior to the sync and delete them on your ipod before you start.
Message was edited by: Ingo2711

Local network error: Connection Failed.

I get the following error message when trying to access any of the computers on our local netwrok:
Connection failed.
The server may not exist or itnot operational at
this time. Cjecl tje server name or IP address and
your network connection and try again.
The computers on the network show up in the Finder under Shared, but when I choose one of the icons, it shows up as Connection Failed - and nothing happens when clicking Connect As.

Have you tried manually connecting to a shared Mac by its IP address?
from the finder press command +K then enter the IP address of the mac you are trying to connect to.
this would rule out an issue with ipv4 networking.
then using the same method use the macs bonjour name. This is the computer name specified in that servers sharing preferences followed by .local
eg.
imac.local
This would find out if the issue is with bonjour networking.
Also in an earlier thread a mac could not connect to any shared computers and this was resolved by the procedure shown in Mac OS X 10.5: "The text entered does not appear to be a recognized URL format" alert when connecting to server or Time Machine

Local Module (Error-Handler) Failed the verify environment test

Similar Messages

Maybe you are looking for