Location Appliance ...Getting started...

After the initial setup..I can ping the appliance but cannot access it through http or https. Even tried port 8001. WCS also cannot add the appliance. What else has to be done?

I have come across the same issue myself however, I can go through the configuration process no problem. I have 3 Cisco 2710 Location Appliances all running version 3.0 code. I got one to work no problem. I configured it, it reset, then I could connect it with WCS. Beautiful. However, the other two WILL NOT work for the life of me.
Basically, I get through the installation process and they reboot. I get back to the CLI after it reboots and log in. From there I do a "getserverinfo" and get the following message:
[root@LocationApp-Area4 root]# getserverinfo
com.aes.client.AesClientException: Request to server failed, reason: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Message send failed
at com.aes.client.AesClientAdminImpl.getServerInfo(Unknown Source)
at com.aes.server.cli.CmdGetServerInfo.run(Unknown Source)
at com.aes.server.cli.CmdGetServerInfo.main(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.zerog.lax.LAX.launch(DashoA8113)
at com.zerog.lax.LAX.main(DashoA8113)
Ok, great, i know this means that the Location Appliance is NOT running for whatever reason. So (and I have been looking at the configuration documents posted online) I tried the following command to start the location:
[root@LocationApp-Area3 root]# /etc/init.d/locserverd start
Starting locserverd: [ OK ]
[root@LocationApp-Area3 root]#
Ok, so it appears as if everything should be ok so I do another getserverinfo and get the same message again.
What do we need to do to get this running and what other trouble shooting methods are there so we can get this working?

Similar Messages

Trying to find the location for getting started with hootbar

I added the hootbar addon and on the information page about the addon it said you could go to the getting started page to find information on how to use hootbar but I can't locate the page

You can try this link:
http://hootsuite.com/hootbar

Itunes not getting started getting " The procedure entry point AVCF playerenabledhardwareaccelerationkey could not be located in the dynamic link libraryAVFoundationCF.dll how to fix?

itunes not getting started getting " The procedure entry point AVCF playerenabledhardwareaccelerationkey could not be located in the dynamic link libraryAVFoundationCF.dll how to fix?

See Troubleshooting issues with iTunes for Windows updates.
tt2

Location Appliance Help required

Hello,
I have a WCS,WLC and LOC deployed. The integration betwen the WLC and WCS is working perfectly. We didn't put a lot of access points in the deployment because we didn't need acurate location tracking but at least we need some.
The problem is the location appliance is not able to pull any information about the connected clients. No clients shows on the map eventhough the APs report connected clients.
One issue I had is when I try to synchronize the network design with the location appliance I get the below error:
"Element found and will be pulled to WCS".
I appreciate any help with issue as it is quite urgent,
Regards,

Hello Sabhasin,
The message I was receiving above was due to time difference between the location appliance and WLC. Now all systems are using an NTP server and in sych.
As for the location on the map I was able to point the problem to the following:
If you delete the location from the WCS and add it again and then go to the MAP you can see the clients and the rogue stuff within a two minutes time range. When the two minutes pass you no more able to see the last two minutes info from the location.
If you choose the past 5 minutes then you see the information on the map. When 3 more minutes pass you no more see anything for the last 5 minutes data.
If you choose 15 minutes after 10 minutes pass you no more see anything on the map.
If you delete the location appliance and add it again you will be able to see the information again starting with two minutes and again same pattern.
Therefore, the issue is that the info is pulled from the location once you add it and after that nothing is pulled.
I tried synchronizing all the servers and no luck,
I appreciate your response,
Regards,

WCS and AL getting started

I have WCS 5.X running with trial license until our we receive our purchased license. Our 2710 AL came in and I have it up and running and known to WCS. I have a couple getting started questions.
Not sure what the https enable is for on the AL? I did a google earth map of our campus. Started to try and place buildings on the map. Once you place a building can you move or edit its size or location. Didn't see a way.
What general steps should I be taking to putting all this together with the WCS and AL? I'm getting floor plans for each building from our physical plant department. Do they sized or edited? I have placed a few APs on each map. Can the AL help in locating the APs on the maps. General stuff to start getting the most out of the software. Been reading what docs I have found.
Craig

You can update the location appliance using the WCS server or manually download the software using a console port connected to the location appliance.
Here is the URL for the installation and configuration steps for the Cisco 2700 AL
http://www.cisco.com/en/US/docs/wireless/location/2700/quick/guide/li31main.html#wp1049597

Location appliance down

WCS is reporting that it cannot communicate with my location appliance. I can ping the appliance, I rebooted while connected via the console and did not notice any errors upon bootup. Is there anything that can be done via WCS to initiate this connection? Is there anything on the location device itself? Wanted to check here before placing call to TAC.

While the WLA may be pingable, the locserv process may not be running.
You can always check this by using the 'getserverinfo' command. If you get Java output then the process isn't running or has problems.
You can check with ps -ax | grep locserv. If you see nothing, it isn't started. You can restart the process with /etc/init.d/locserverd start.
If this doesn't work, there may be some errors in the database. In this case, we may need to delete the database. Before doing this, you may want to grab the logs (/opt/locserver/logs) and open a TAC case.
ps -ax | grep locserv (kill anything that remains- "kill -9 ")
cd /opt/locserver/db/linux
rm -f server-eng.db
-go to cd /opt/locserver/installers
-Uninstall the current version
-Install again
/etc/init.d/locserverd start
/opt/locserver/bin/getserverinfo

Dev server the dispatcher is not getting start

Dear all ,
We are facing problem in dev server the dispatcher is not getting started. Plese suggest
The log file .
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Mon Oct 05 08:43:39 2009
B create_con (con_name=R/3)
B Loading DB library 'G:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'G:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'G:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.220)
B New connection 0 created
M sysno      00
M sid        DEV
M systemid   561 (PC with Windows NT)
M relno      6400
M patchlevel 0
M patchno    247
M intno      20020600
M make:      multithreaded, Unicode, 64 bit
M pid        4936
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4936) [dpxxdisp.c   1170]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm)          38064     (1464)
M DpShMCreate: sizeof(tm_adm)          3609968     (17960)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpShMCreate: sizeof(comm_adm)          312000     (624)
M DpShMCreate: sizeof(vmc_adm)          0     (512)
M DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000D440050, size: 4077792)
M DpShMCreate: allocated sys_adm at 000000000D440050
M DpShMCreate: allocated wp_adm at 000000000D441C30
M DpShMCreate: allocated tm_adm_list at 000000000D44B0E0
M DpShMCreate: allocated tm_adm at 000000000D44B110
M DpShMCreate: allocated wp_ca_adm at 000000000D7BC680
M DpShMCreate: allocated appc_ca_adm at 000000000D7C2440
M DpShMCreate: allocated comm_adm_list at 000000000D7C4380
M DpShMCreate: allocated comm_adm at 000000000D7C43A0
M DpShMCreate: allocated vmc_adm_list at 000000000D810660
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000D810690
M DpShMCreate: allocated wall_adm at 000000000D8106A0
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Mon Oct 05 08:43:40 2009
M calling db_connect ...
C Prepending E:\oracle\DEV\ora92 to Path.
C got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1 000000000EE4FF20 000000000D0CDA90 000000000D0CD3C8
C Attaching to DB Server DEV (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78)
C Starting user session (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78,usrhp=000000000EE71C70)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c      4508]
C Detaching from DB Server (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c    11395]
C Try to connect with default password
C Connecting as SAPDEV/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1 000000000EE4FF20 000000000D0CDA90 000000000D0CD3C8
C Attaching to DB Server DEV (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78)
C
C Mon Oct 05 08:43:41 2009
C Starting user session (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78,usrhp=000000000EE71C70)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c      4508]
C Detaching from DB Server (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c    11395]
B ***LOG BV3=> severe db error 1033      ; work process is stopped [dbsh#3 @ 1199] [dbsh    1199 ]
B ***LOG BY2=> sql error 1033   performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1283]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9708]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server DEVDEV_00 on host DEVDEV (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Mon Oct 05 08:43:41 2009
M * RELEASE     640
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        9893
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4936) [dpnttool.c   357]
Regards,
Kumar

Hi Sunny,
Thanks , i have try to stop the database and then startup the database. Then it is giving me error
SQL> startup
ORACLE instance started.
Total System Global Area 1109237592 bytes
Fixed Size                   737112 bytes
Variable Size             587202560 bytes
Database Buffers          520093696 bytes
Redo Buffers                1204224 bytes
Database mounted.
ORA-01113: file 3 needs media recovery
ORA-01110: data file 3: 'I:\ORACLE\DEV\SAPDATA3\DEV_1\DEV.DATA1'
Please suggest what next command to recovery database in oracle 9i.
Thanks,
Kumar

Got a Problem? How to Get Started

Getting started on fixing your problem:
Working with video editing on an NLE (Non Linear Editor) program can tax the most robust computers. Depending on many factors, this can be a daunting task, at best. Many of the components of one’s computer can be stressed, more than with almost any other operation, that it will ever perform.
Getting help on the forum can seem almost as daunting, as the first thing that a poster is likely to encounter is a list of questions, before any answers. This is the natural flow, because people are trying to help remotely. They cannot come to your office and sit behind you to determine your computer system’s capabilities, and observe just what you are doing, when and how you are doing it. Do not be put off by these questions, as they are very necessary and will very likely give the respondents some clues on where to look for your problem.
Problems can normally be broken down into these categories:
1.) System
2.) Assets (the Audio, Video and still images)
3.) Project (how it is setup and with which Preset)
4.) Workflow (what you are doing, and how you are doing it)
If you prepare a checklist, before you post your problem, it will save everyone a great deal of time, and will likely yield your answer much more quickly. The more detail that you furnish, the fewer questions will remain, that have to be asked. Remember, you have to be the "eyes" for the others on the forum, if they are expected to help you. They could be thousands of mile away, in other time zones, and will not know about your system, your Assets, your Project or your workflow, until you tell them. Help them get started quickly, by telling them in your first post. Do your "homework," so they do not have to ask questions for the first five responses, and can start giving you answers much more quickly.
System:
Be very specific about your computer. Just saying that "I have a Dell" doesn’t tell them much of anything. List your CPU type and speed, i.e. Core2 Quad Q6700 2.3GHz. Same for your RAM, i.e. 4GB of DDS. Also, list your Video Card, type, connection and driver number and date. Same for your Audio System. Note: most of this data can be found in Control Panel>System>Hardware>Device Manager. Pointing people to a URL on your computer company’s Web site isn’t a bad idea, but giving the exact details of your system is far, far better. It is likely that that Web site will have the general configuration, and who knows if that is exactly what you bought. List it for them, so they do not have to go and guess, and write down the specs. of your system.
One of the most important aspects of your system will be the I/O sub-system. What is that, you might ask? Well, it’s your HDD’s (Hard Disk Drives). The important info is how many physical HDD’s do you have. List their size, their speed, their connection, the amount of free, defragmented space and how they are allocated. This would look something like this: "3x 200GB SATA II. Drive C:\ OS, programs and Windows Virtual Memory with 185GB free, D:\ media with 120GB free, E:\ Project files, output and Scratch Disks with 150GB free." If you have any drive partitioned (not a good thing nowadays), let everyone know and give details. If you have a RAID, give full details on how it is managed, the type and how it is used in your system. [As an aside, most RAID’s should not really be considered for a system drive, unless one has built in redundancy in the RAID, i.e. 3, or more, physical disks. Remember, this info can be critical. If you have CD/DVD burners, list them and their connections. If you have external HDD’s, list them with the same details as for your internal HDD’s.
Next, tell about your Windows Virtual Memory (Page File). How large is it, where is it located on your system and how is it managed, i.e. dynamically by Windows, or static? Again, this can be critical. For info, you will need to go to Control Panel>System>Advanced>Performance and look. In the Settings>Advanced, you should see things like Process Scheduling, Memory Usage and Virtual Memory. This is where you will find the answers. Note: depending on which OS one has, the exact location and syntax may differ.
While we’re on the OS, list the exact OS that you have, i.e. Vista Ultimate 64-bit SP-2 with all updates and hot-fixes.
What version of the NLE are you using and has it been updated, i.e. PE3.0.2.
Finally, list any other programs, that might be in use, while you are editing, such as MSN Messaging, etc. These can be critical, even though you are basically editing video.
Assets:
Give full details on your Assets. Just saying "a bunch of .AVI’s" tells people nothing. Be very specific with the details. See this ARTICLE on what info to give, and how to obtain it. Same for your Audio and for your still images. Size in pixels, file type, etc., are very important for the stills, and file type. Sample-rate and sample size are important for the Audio.
Project:
How is your Project setup? Which Preset did you use? What is the Duration of your Timeline. This gives someone the "lay of the land," so to speak and is very important. Note: your Project Preset should match your Video Assets. You can always Export/Share to some other frame size, or format, but your Project should match your Video Assets.
Workflow:
How have you arranged your Assets on the Timeline allows someone to "see" your Project in their mind. Information such as one 00;10;00;00 AVI (remember, you will have furnished complete details on those AVI’s, or MPEG’s when you listed your Assets above) on Video Track 1 (VT1) with its Audio on Audio Track 1 (AT1). One AVI used as a PiP (Picture in Picture) on VT2 with its Audio on AT2. One MP3 soundtrack for the full Duration on Soundtrack and my Narration on the Narration Track. List any Transitions, or Effects used. If you have Titles, list them. If you have any Keyframing used, list where and what they control.
List exactly what you are doing and to which Asset you are doing it, when your problem occurs. If you are doing something like Export/Share, list the full settings (Presets) used, and be sure to mention any other tasks being performed by your computer, while you are doing the Export/Share.
If you have already done some trouble shooting, list what you have done and the complete results. Were there any error messages? If so, give the full description. To say, "I had error messages," tells people nothing. What exactly did they say?
This information will help people get right to your problem and will get you up and running much more quickly.
As an aside, think about the title of your post. Saying "Problem" is not good enough. Instead, something like "PE7 Fails on Share to MPEG-2" would be better. First, you are trying to let everyone know something about your Problem, so they will see it, and be interested in helping you. If you are having an Audio issue, mention "Audio" in the title, so the right people will find your post. Not everyone knows everything about all aspects of Video. You want the right people to see your post and to be working with you, to fix your problem. Also, later on, it is good to have a title that will be easily found by others, who may have the same exact problem. If you get an answer that works, please post back that success, so others, finding your post, will know what worked, and what did not. Note: do not put your entire post into the title. That is just tough to read and understand. Use a few words, but make them the right words.
Other useful links:
Get Help Quickly
FAQ's
System Crashes
PE Help
Forum Etiquette
Help others to better help you.
Hunt

Hi Bill, Ho
w or more like where do I post a question. I can go to a forum page wher
e there are questions but there is no place to ost a question.
If you could clear up this I would greatly appreciate it. I've been looking for 2 hours.
Thank you!
Cindy

Can not get example to work after following instructions given in "Getting Started with the NI LabVIEW C Generator" guide

We explored using sbRIO for our project, for different reasons we ended up going with a different embedded solution . We are currently evaluating the LabVIEW C Generator to convert some of the core analysis routines from LabVIEW to C so the team that will be creating the embedded solution don't have to re-implement them from scratch.
Before converting our code, I followed the instructions given in the "Getting Started with the NI LabVIEW C Generator" manual to create a static library created inCygwin using GNU Compiler Collection (GCC).
I managed to compile the code, but when I type "run GCD.exe" in the Cygwin console, I just see the window flash with no time to see if the result is correct or not. I modified the main.c cde to add a getchar(), but the window still just flashes and now I am left with the GCD process still running and have to kill it using Windows Task Manager.
Has anyone else got this example to run? I am sure I am missing an obvious setting or step, please help me.
More details below.
Thanks,
Fab
Here is a video showing the steps I followed
If you don't want/can't see the video. Here are some screenshots of what I have done so far:
GratestCommonDivisor.lvproj C Generation build specs Information:
C Function prototype definition:
I copied Makefile located at: C:\Program Files (x86)\National Instruments\LabVIEW 2011\examples\CGenerator\Tutorial\Cygwin
and replaced both Makefile and Makefile.cygwin in the directory where the C code was generated
I also copied main.c from the same location and replaced the one generated
Here is the snapshot of the results after executing "make GCD.exe"
Then to run it I just type
I see a window open and close really quickly and I never see the result. I have tried adding the getchar() line to the main.c file, but still I don't get to see the results.
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion

Hi Kevin,
I hope you had a good Thanksgiving. I am attaching a zip file with the LabVIEW project, my build specification and my version of "Greatest Common Divisor.vi", which should be the same as the one that you have that ships with the LabVIEW C Generator, but just in case. I am also attaching a zip file with the C files generated by the LabVIEW C Generator.
You can also see the video I posted earlier with the steps I followed. I hope you are able to point out where I went wrong.
Thanks,
Fab
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion
Attachments:
GreatestCommonDivisor.zip ‏8 KB
CGen Files.zip ‏71 KB

"disp+work" process in not getting started after kernel upgradation

Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      55
M sid        TNG
M systemid   562 (PC with Windows NT)
M relno      7410
M patchlevel 0
M patchno    42
M intno      20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid        2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm)                         24288    (1104)
M DpShMCreate: sizeof(tm_adm)                          51472080             (256080)
M DpShMCreate: sizeof(ca_adm)                           432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm)                   7583152                (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)                      0              (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)                         0              (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm)                       520080 (1016)
M DpShMCreate: sizeof(vmc_adm)                       0              (3208)
M DpShMCreate: sizeof(wall_adm)                        (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm)                              (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm)                         (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm)          64
M DpShMCreate: sizeof(j2ee_adm)       3936
M DpShMCreate: SHM_DP_ADM_KEY                  (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c   2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M    pid = 2392
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    workerType = DP_WORKER_DIAWP
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M mode_cleaned_counter = 0
M    control_flag = 0
M    report = > <
M    action = 0
M    tab_name = >                              <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for                  64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
                              711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tng

C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB

BPMA services not getting started

Hi,
We recently installed Oracle EPM suite 11.1.1.1 in one of our Windows 2003 SP1 Server. The products so far installed are:
EPM Foundation Services
Performance Management Architect
Calculation Manager
Financial Management
Workspace
Financial Reporting
Smart Space
However the Performance Management or Dimension Server (Or any related services to BPMA) services doesnt get started. Also we tried to manually start the service by opening the "HyS9BPMA_EventManager.exe" but it gives error
"Cannot Start Service from the command line or debugger. A windows serrvice must first be installed (using installutil.exe) and then started with the ServerExplorer, Windows Services Administrative tool or the Net START command".
However the InstallUtil.exe also doesnt solve the purpose.
Have anybody faced such kind of issues or has a resloution? Kindly provide any pointers.
regards,
James

Hi John,
Thanks for the prompt reply.
These are the related services in ServiceManager that I can see:
Hyperion EPM Architect - .Net JNI Bridge
Hyperion EPM Architect - Engine Manager
Hyperion EPM Architect - Event Manager
Hyperion EPM Architect - Job Manager
Hyperion EPM Architect - Web Application
Hyperion EPM Architect Data Synchronization - Web Application
All these services are started.
The service Hyperion EPM Architect - Process Manager is not present in these services list. Although the exe file is present in the location:
*<HYPERION_HOME>\products\Foundation\BPMA\AppServer\DimensionServer\ServerEngine\bin* I can see the file HyS9BPMA_ProcessManager.exe .
But it doesnt get started.
I tried reinstalling the BPMA, but no positive result. Do you think I missed something in between.
Thanks in advance.
James

"Get Started" URL doesn't work...

I downloaded Oracle Database 11g Express Edition, when I click on Get Started it gives me the below error
Oops! Google Chrome could not connect to 127.0.0.1:8080
I also tried using IE browser, same error pops up.Tried all that is there online, doesn't seem to work.
My OS is Windows7. Help Me, I am new to it and I need it badly

Hey Orafad,
Thanks for your quick and prompt response, and trying to resolve my issue, really appreciate the help.
orafad wrote:
972606 wrote:
Pasting the complete contents of the cloneRmanRestore log file:
SQL> startup nomount pfile="C:\oracle\app\oracle\product\11.2.0\server\config\scripts\init.ora";
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00130: invalid listener address '(ADDRESS=(PROTOCOL=TCP)(HOST=MINDTREEM807031)(PORT=1521))'
...Instance startup failed on networking config error (and the remainder of the create db process becomes kaput).
Is 'mindtreem807031' a resolvable name?I'm not sure how this hostname got in there...I checked the listener.ora and tnsnames.ora and both have a correct host name which is MindtreeM8070313
>
Did os/networking configuration change recently? Is this on a portable device, or with changing network "locations"?This is on a laptop and probably has a dymanic IP being assigned by the ISP.
>
>
What does hostname command return?C:\Users\m8070313>hostname
MindtreeM8070313
>
What does following commands return?
ping -4 mindtreem807031C:\Users\m8070313>ping -4 mindtreem807031
Ping request could not find host mindtreem807031. Please check the name and try
again.
ping -4 localhost
ping -4 <output from hostname>Ping was successful for both the above commands.
>
>
>
SQL> @C:\oracle\app\oracle\product\11.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
SQL> set echo off;
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
declare
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
Connected to an idle instance.
SQL> spool C:\oracle\app\oracle\product\11.2.0\server\config\log\cloneDBCreation.log
Weirdly, now when I try to connect to sqlplus, I see a new error:
C:\Users\m8070313>sqlplus /nolog
SQL*Plus: Release 11.2.0.2.0 Production on Thu Nov 22 11:56:58 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> connect
Enter user-name: sysdba
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter errorCommonly (on Win platform) this means the related Win Service is not started -- assuming ORACLE_SID and, possibly, PATH correctly set (the latter if you have another Oracle home installed, besides XE server).I've set a System Env variable -- ORACLE_SID as -- PLSExrProc, I assigned this from the listener.ora file which has (SID_NAME = PLSExtProc)...Please correct me if this is not supposed to be like this....
and PATH is set to
C:\oracle\app\oracle\product\11.2.0\server\bin;C:\Perl\site\bin;C:\Perl\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files\Riverbed\Steelhead Mobile\;C:\Program Files\QuickTime\QTSystem\
>
Btw, the proper syntax is 'connect / as sysdba' or equivalently for user-name respons '/ as sysdba'.
Edited by: orafad on Nov 22, 2012 10:52 PM
Edited by: orafad on Nov 22, 2012 10:54 PM

"Tutorial - Getting Started with JSF" does not work

I tried the "Tutorial - Getting Started with JSF" located on http://www.oracle.com/technology/obe/obe1013jdev/jsfintro/jsfintro.htm#t6, but the last part "Creating a conditional navigation" is not complete.
There are 2 issues
1. The return values in the code blocks in step 9 and 11 do not match with the given example code.
2. In step 12 I am missing the way to bind this message component to returned message from the login.
Could you please correct the code parts and add the message binding piece?
Thanks,
Aard Jan

I tried the "Tutorial - Getting Started with JSF" located on http://www.oracle.com/technology/obe/obe1013jdev/jsfintro/jsfintro.htm#t6, but the last part "Creating a conditional navigation" is not complete.
There are 2 issues
1. The return values in the code blocks in step 9 and 11 do not match with the given example code.
2. In step 12 I am missing the way to bind this message component to returned message from the login.
Could you please correct the code parts and add the message binding piece?
Thanks,
Aard Jan

How to get started Organizing photos with tags and albums

Apporximately 15,000
Mostly family, vacations, travel, etc over 30 years
What is the BEST way to get started? Should I tag them first or put them in albums and sub-albums and then try to tag and further identify them? I know nothing of how is best to proceed.
I am oveerwhelmed with the process and cannot seem to find a starting point. I have looked at many of the tutorials, but cannot find a "1-2-3 A-B-C" roadmap.
Message title was edited by: Brett N

I would recommend doing all (okay, almost all) of your organizing via tags. Don't bother using albums unless there are a subset of photos that you want to display somehow (like a slideshow, or photobook) in which case albums are the right tool. Also, make sure that when appropriate, you add the proper captions and notes.
I would start by using pencil and paper (or word processor) to make a list of categories and tags, in the appropriate hierarchy, that you might want. For example, in the people category, there are tags Jones Family, Smith Family, etc. (and sub-tags with people's names) In the event category, there are tags Vacation, Beach, Christmas, Hanuka, etc. Other categories you might want: Location (example: New York, Boston, Illinois), Content (mountain, church, waterfall, gorilla, historical site). This part completely depends on you.
Once you have this hiearachy of categories and tags to your liking, start creating/adding the tags (and captions and notes if needed) to your photos. You can work in small batches. Eventually you will have all your photos tagged (trust me, I know, I did this too).
Do NOT: move photos or folders from here to there, or rename them ... this is unnecessary extra work, as you will be using your tags from this point forward to locate your photos (exception: if you want/need to move the photos to a different hard disk, then by all means do so).

Can't watch Getting Started video on 16.0.1 install page with up to date Intel Mac 10.6.8 - no mp4 plugin?

"Getting Started" page for Firefox 16.0.1 has a video window that plays audio only. Firefox test page for plugins shows RealPlayer, Flash, Flip4Mac and Java are up to date. What other video plugins are required. I'm currently using Firefox 10.0.2 and I'm not inclined to update unless I have good reasons to do so.

When the page opens I get a message that plugins are missing. Clicking on Install Missing Plugins comes up with Unknown Plugin (video/mp4); Manual Install takes me to the DivX Install page - DivX is up to date.
Once I start the video, Copy Video Location is not an option with Control-click. I can access Page Source, which seems to suggest that Flash is not installed although the Plug In check page says it is.
Is this extract from Page Source helpful?: div class="video-player-no-flash" This video requires a browser with support for open video or Flash.
There doesn't seem to be an option here to be able to attach the whole Page Source as a text file.
Cheers.

Location Appliance ...Getting started...

Similar Messages

Maybe you are looking for