Location of Labels

I am attempting to create a new form (I am new to this software). Some of the data fields require labels to appear on top of the data field while other labels should appear to the left of the data field. When I try to change the appearance for one - it changes the appearance for all. Please help!

There are a lot of difference between FormsCentral and LiveCycle Designer. If you need to create complexe forms you might want to keep using LiveCycle Designer.
Here are instructions on how to upgrade if you used to have an older version of Acrobat. http://helpx.adobe.com/x-productkb/policy-pricing/upgrade-livecycle-designer-acrobat-xi.ht ml
Adobe LiveCycle Designer Page :
http://www.adobe.com/products/livecycle/tools/designer.html
Gen

Similar Messages

Where to locate return label for phone

Placed three new orders online for Early Edge phones. One iPhone 6, and 2 Samsung S5s. I did not get a bag with one of the phones and I called Verizon and they said that I need to come online and I can find where to order the bag to return the old phone. I don't see that. I also didn't know that the phones had to be in excellent working order that I am returning. My sons phone is in his life proof case. However, before he had the case he cracked the glass on the back of the phone. That is why I ordered the early edge so I could replace his phone. Please advise on both issues. I need to get this phone returned.

> Where do I configure a GR Label to be printed using
> MIGO?
>
> The entires need to be in T1590 but I do not know how
> to enter the values.
>
> Some Transaction Code should be doign this. I would
> like to know what it is.
>
> Thanks,
> Ven
Hi,
SPRO>Materials Management>Inventory Management and Physical Inventory>Print Control>Set Label Printout
For output type used for label, you would need to setup output (condition type) in Maintain Output Types under SPRO>Materials Management>Inventory Management and Physical Inventory-->Output Determination
Read its associated IMG help document right before each of these config elements...You can learn yourself.
once you configure this, for labels, expecially, you need to setup master data in storage location data required.
Good Luck.

SAP:AKK:700:UKERNEL:*:WINDOWS_I386:* cannot locate this label

I am trying to install SAP 7.0 and I get the following error:
You entered: C:\Program Files\SAP70\51032258\IM_WINDOWS_I386 Found the label SAP:DW-WEBAS:7.00:SAPINST::WINDOWS_I386: but need the label SAP:AKK:700:UKERNEL::WINDOWS_I386:

Hi Chris,
If you look section 2.2 "Preparing the Installation DVDs" of the Developer Workplace for SAP NetWeaver 7.0 SR2 Installation Guide, you will see:
2.2 Preparing the Installation DVDs
Make sure that you have the following installation DVDs available:
SAP NetWeaver 7.0 SR2 Developer Workplace DVD
SAP NetWeaver 7.0 <your Database> RDBMS DVD
SAP NetWeaver 7.0 SR2 Kernel DVD
So the single Developer Workplace DVD (51032258) that you are using is not sufficient to install the entire Developer Workplace. The label you are looking for should be on the SAP NetWeaver 7.0 SR2 Kernel DVD.
Best Regards,
Matt

HT1364 I am trying to change the location of my itunes library and the library doesn't copy to the new location.

I am trying to change the location of my itunes library and the library doesn't copy to the new location. I followed the steps in the help message (HT1364) exactly but I am not prompted to consolidate in the new location. Any suggestions?

Hi ed2345 and diesel vdub, when I consolidate, the files start copying to the new location and part way through I get a message that the copying failed (-50) even though all of the files are already in place in the new location. Should I just delete the itunes in the new location and manually copy the files again? But in itunes, I have indicated that the new location is on the external hard drive but itunes seems to ignore that and still looks for itunes in the original location on my internal hard drive. I disabled the location of itunes in the old location (by labelling itunes as "itunes old") and it tried to create a new itunes at the old location and prompted me to import music and videos from a CD or other source. I hope I am making sense.

Problem with simple label program

I'm getting a problem to a most basic program. I'm using the Java2 Fast And Easy Web Start book. This simple label program gives me an error when I compile. This is the program
//Label Program
//Danon Knox
//Another basic program
import java.awt.*;
import java.applet.*;
public class Label extends Applet{
public void init(){
   Label firstlabel = new Label();
   Label secondlabel = new Label("This is the second label");
//put the labels on the applet
add(firstlabel);
add(secondlabel);
}// end init
}// end appleterror when I compile is as follows:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\>cd java
C:\java>javac Label.java
Label.java:12: cannot resolve symbol
symbol : constructor Label (java.lang.String)
location: class Label
Label secondlabel = new Label("This is the second label");
^
1 error
C:\java>
Can anyone help me?

public class Label extends Applet{The name of your class is "Label". This choice of name hides the class named "Label" in java.awt.
Label firstlabel = new Label();This creation of a Label is successful because the class has a default, no-argument constructor.
Label secondlabel = new Label("This is the second label");And this one fails because there is no constructor for Label that takes a String argument.
You probably want firstlabel and secondlabel to be java.awt.Label objects and not instances of your own Label class. Try this:
public class Label extends java.applet.Applet{
    public void init(){
     java.awt.Label firstlabel = new java.awt.Label();
     java.awt.Label secondlabel =
         new java.awt.Label("This is the second label");
     add(firstlabel);
     add(secondlabel);
}As a general remark, I advise programmers to stay away from
import a.b.*;statements which import entire packages into your program namespace.
When starting out, I believe it is better to write out the fully qualified names ot the classes and methods you are working with. This helps you learn the class hierarchy, and makes your code clearer.
Others will disagree, but that's my opinion...

Find Friends Location on iPhone not working after reset

My grandson recently reset his iPhone 6 for reasons related to certain music not syncing properly with iTunes. As a result of the reset, his location is labeled "not available" in the Find Friends app when others are trying to find him. He can still see his friends locations. They just can't see him (his phone). Interestingly, in his Find My Friends app, under Me, it shows "location services off". But under Settings, Privacy, Location Services, it shows "On" and Find Friends app is showing "While Using". His iCloud account is also showing Share My Location as "On" From his iPhone ("This Device").
Any help as to what could be causing this would be most appreciated.
Thanks,
Ken Templin

We were able to fix the issue by doing the following:
In Settings select Privacy, Location Services and scroll down to the bottom and select System Services. While everything was green (switched on), we turned Share My Location off and then back on. His location is now available to his friends (and parents). I have no idea why this worked to fix the issue, but it did.
Ken

I never got my UPS return label for my old equipment

I never got my UPS return label for my old equipment

emchaviano wrote:
I never got my UPS return label for my old equipment
Apologies. We can get you a UPS Return label if you need one.
Otherwise, you can return the equipment at one of the local service centers listed below or any UPS Store location (no label required).
Some options listed below:
Comcast
18055 SW Franjo Rd
Palmetto Bay, FL 33157
MONDAY-FRIDAY: 8:00am-5:00pm
SATURDAY: 10:00am-2:00pm
SUNDAY: Closed
Comcast
7404 SW 117th Avenue
Miami, FL 33183
MONDAY-SATURDAY: 8:00am-7:00pm
SUNDAY: Closed
The UPS Store
14629 SW 104 STREET
MIAMI, FL 33186-2905
Phone: (305)408-7430
Mon - Fri 08:30-07:00, Sat 09:00-04:00
The UPS Store
12973 SW 112TH ST
MIAMI, FL 33186-4768
Phone: (305)382-5220
Mon - Fri 08:30-07:00, Sat 09:00-04:00
The UPS Store
8306 MILLS DR
MIAMI, FL 33183-4838
Phone: (305)595-8577
Mon - Fri 09:00-07:30, Sat 09:30-05:00
The UPS Store
18495 S DIXIE HWY
MIAMI, FL 33157-6817
Phone: (305)238-2242
Tue - Fri 08:30-07:00, Sat 10:00-03:00
More info here: http://customer.xfinity.com/help-and-support/cable-tv/returning-your-equipment/

PM-Functional Location

Where do I find the labeling system in customising?

hi
follow the path IMG>PM/CS>Master data in PM/CS>Technical objects>Funtional location>Alternative Labeling of Functional Locations
regards
thyagarajan

Simple Label Class not installed

Hi,
I recently started working with Java ( :) ) however when i started using the Label class for applets, i keep getting this error.
import java.applet.Applet;
import java.awt.*;
import java.awt.event.*;
public class Label extends Applet implements ActionListener {
     TextField text1;//, output;
     Label label_outtput;
     Button submit;
     public void init() {
          label_outtput = new Label();
          add(label_outtput);
          //output.setText("OUTPUT:");
          text1 = new TextField(20);
          add(text1);
          submit = new Button("Submit");
          add(submit);
          submit.addActionListener(this);
     public void actionPerformed(ActionEvent event) {
          String msg;
          msg = new String("this is output!");
          if(event.getSource() == submit) {
               msg = "OUTPUT" + text1.getText();
               label_outtput.setText(msg);
               text1.setText("");
The error comes when the compiler gets to "text1.setText(""); "
Error:
Label.java:33: cannot find symbol
symbol: method setText(java.lang.String)
location: class Label
label_outtput.setText(msg);
^
1 error
ive had a few programmers who specialise in Java, tel me that this means that Label.class doesnt exsist on my system. I have completely uninstalled every Jana/Sun component on my computer, and redownloaded and reinstalled jDK etc, however its still not working.
How can i check whether or not the Label class is installed, and how would i "reinstall" it if it isnt?
thanks for your help

flounder wrote:
since you have also defined a class named "Label" .....You know I could have sworn 2 other people said this almost an hour ago.He did add something though.
Clem1986 wrote:
you'd have to defeat the ambiguity you introduced by referring to Java's Label class as such everytime you refer to it
java.awt.Label javaLabel;btw, the people you consulted are decidedly not experts if they can't catch something this simple
import java.applet.Applet;
import java.awt.Label;
public class MyLabel extends Applet {
Label my_variable;
public void init() {
my_variable = new Label("Trial Text");
add(my_variable);
}I tried that, it works fine.

Move Documents from a site to a sub site with SharePoint on Office 365

Good Morning,
I am trying to configure my Content Organizer Rules to send documents uploaded in one site (e.g. contoso.sharepoint.com/DropOffLibrary) to a library in a sub site (e.g. contoso.sharepoint.com/testSite/destintionLibrary). I have turned on the Content Organizer
for both sites, checked the setting that "<label for="ctl00_PlaceHolderMain_enableCrossRoutingSection_crossRoutingCheckBox">Allow rules to specify another site as a target location", and </label>ensured the content type was
on the Drop Off Library and the destination library. The Content Type was a custom type that included custom columns.
I created a rule based upon one of those columns that sent the document to the correct library (site) based upon the choice made. The column did not accept any value except the choices provided. When I try to enter the destination for the document,
the sub-sites are not listed as options to select and neither are the libraries contained within them. When I enter in the URL for the targeted library, the message "A valid target path must be selected." appears. If I create the same rule,
targeting the local library, it works.
Any ideas on why this is not working for me?

Hi Zac,
In order to route documents from one site to another, please make sure you have set up a send to location in Records Management in SharePoint admin center for the destination site.
For more information, you can refer to the blog;
http://office.microsoft.com/en-in/sharepoint-server-help/implement-records-management-HA102893868.aspx
https://social.technet.microsoft.com/Forums/office/en-US/239374eb-f617-48eb-b2c6-6aefaa810145/content-organizer-rule-a-valid-target-path-must-be-selected?forum=sharepointgeneralprevious
http://office.microsoft.com/en-in/sharepoint-server-help/create-content-organizer-rules-to-route-documents-HA102772939.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Home wireless network help!

Ok... So I recently moved to a new house, and moved my Internet service. Im with AT&T and I had DSL. I was supposed to have next day installation because I work from home and take classes from home and every day I go without Internet costs me money. However, they told me that DSL was not available in my area. I ordered Uverse and I ended up having to wait a week and a half for them to install that, only to find out that the couldn't because the cable box is too far away from my house... But they said I could get DSL. Anyway, long story short, it's been two months, I had to drop two classes which has cost me almost $3,000 alone, and I haven't had any income because I can't work.
I have Internet now, however the way AT&T set it up mean i had to get a new modem. My old set up involved a 2wire router/modem connected to a time capsule in bridge mode. It worked like a dream and I was able to have my laptop, desktop, ps3, 360, wii and two iPhones connected to it all at once with no problems. Now I have a motorola modem connected to the time capsule. All of my devices are detecting my wifi network, but non of them can connect. The ps3 times out trying to obtain an ip address, the phones connect to the network but continue to use 3G, and my laptop gives me the "another device is already using this ip address" message.
What do I need to do to get everything up and running again? I'm sick of typing and browsing with my iPhone and not having Internet. In my case time really is money... Anything any of you can offer to possibly help would be greatly appreciated....

Resetting the Time Capsule back to factory defaults will not affect your backups in any way, as the reset only affects network configuration settings, not the Time Capsule disk.
I'm not sure if you will be able to make much progress without an internet connection, but if you want to try, here is the sequence of events:
If it's not already, connect the ethernet cable from the modem directly to your Mac
Open your browser and type in 192.168.1.254 into the address bar and press Enter. This should bring up the modem configuration pages, which you have already seen.
Click on the Advanced tab/label on the left
Click on the PPP Location tab/label
Select the option for "PPP is on the computer (router)"
Click Save and the modem will restart with the new settings
Important...if you ever need to return the modem back to its new, out of box configuration, hold in the reset button on the back of the modem for 8-10 seconds, then release. It will restart with original default settings.
Connect the ethernet cable from the modem to the WAN (circle of dots icon) port on the Time Capsule.
On your Mac, open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Internet icon
Connect Using = PPPoE
Enter your user name (probably your email address with the provider) and password. Confirm password.
+Important...leave the Service Name area completely blank+
Connection = Always On
Disconnect if Idle = Never
Click Update at the lower right and the Time Capsule will restart in 25-30 seconds.
You may need to restart both the modem and Time Capsule again. With no internet connection, you won't be able to test for connectivity, but when the service comes back on, you should have an internet connection on the Time Capsule. Post back on your progress.
You will probably need to reset Time Machine to get backups going again as follows:
Open System Preferences (gear icon on the dock)
Open Time Machine
Click Select Disk
Click your Time Capsule to highlight it
Click Use for Backups

Storing Library on an external drive

I am using iPhoto 6.0.2 on a MacBook Pro (Mac OS 10.4.9, 2.33 GHz Intel Core 2 Duo, 3 GB Memory, with a 100 GB hard drive). My iPhoto LIbrary is 28.3 GB, which is taking up a LOT of hard drive space. In fact, I only have 6 GB free right now. I can't free up a lot of space, as I don't really use the laptop for document storage. Instead, my son set up a network file server with two mirrored 250 GB drives.
On this file server I have two genealogy folders (ancestors' pictures and scanned documents) -- one is 8.95 GB and one is 22.6 GB. I would like to get these images into iPhoto so that I could assign keywords and make them a lot easier to locate and label. Also, since the new version of Reunion (my genealogy program) works with iPhoto, it would simplify that as well.
I don't want to put the iPhoto library on the file server as this is not easily accessible when I travel.
What problems can I expect? Will this make my Photo Library too large to manage? Will it slow things down? Will I run into trouble using an external hard drive for my photos? I know it will be a bit of a nuisance -- I'm a teacher and I already have 100GB drive I use strictly for work. Sometimes it's a pain plugging in when I want to work, but the plus side is I can use it on either of my laptops or my computer at school. Will iPhoto cause any unique problems? Would I be better off to create multiple libraries? And is that even possible?
Backing up is not an issue as I also have an external Maxtor drive -- I have it set up to back up the school drive every time it's plugged in and could do the same with whatever drive I decide to use for photos. I am pretty fanatical about keeping decent backups -- at least on a monthly basis. I just plain have too much data to lose it all!

Joyce
I'll try and take these in order.
In fact, I only have 6 GB free right now.
OS X needs about 10 gigs of HD space to function correctly. It uses this space for Virtual Memory, Temporary Files etc. Without this space the machine will slow down, apps will begin to crash and there is a much increased chance of File Corruption. You need to make space on your HD and you need to do that first.
Do I understand you correctly? You have a too little disk space as it is, and then you want to add more pics to your library, but don't want to put the library on the server?
You cannot put the files on the Server into your current iPhoto as you don't have enough room. As you say you want to be able to locate and label these files, but don't mention a need for them to be available when you travel, then create a new library on the Server (hold down the option (or alt) key and launch iPhoto. Choose Create and place the library on the Server. Don't forget that you'll need to press the option (or alt) key on launch to switch between libraries) iPhoto Library Manager is an invaluable asset when managing multiple libraries.
Multiple libraries are an inconvenience. You can only have one open at a time. But it seems to me that it's your only option, or a lot more disk space.
Finally, Old Toad, the most generous contributor to this forum, has developed a number of tutorials for using iPhoto in different scenarios. One of them details how to use iPhoto in an 'Alias' Mode, which would allow you to store the pics off your main HD but they would be viewable while away from the storage. There are some caveats with the system, but it might be appropriate. Have a read of it here:
http://web.mac.com/toad.hall/iWeb/OldToad%27sTutorials/Tutorial%20Index.html
Regards
TD

Error in creating connection object

Dear Experts
When I am creating connection object using ES55 , I get Stop message saying : " Alternate ID not supported" and when i see Help it indicates : An alternative indicator is active in Customizing of the functional location. This functionality is not supported for connection objects and device locations
what could be going wrong
Plesae suggest me the solution
Thanking you in advance
warm regards
narasimha

Hi,
Please check the following settings in SPRO:
Plant Maintenance & Customer Service - -Master Data in Plant Maintenance & Customer Service --Technical Objects --Functional Locations --Alternate Labeling of Functional Locations - - Activate Alternative Labeling --
In this setting pls inactive the setting for Alt.Label.Then go to ES55 and try.It will work.
Thanks,
Banasri Mitra

Problem with adobe reader print dialog box

I am using Acrobat reader application embedded in our product.
We opens reader using our application .Then opens any PDF document .
Then try to print that document.
But print dialogue box does not display well.It looks like corrupted.And the textbox location and label location in dialog box have been changed so can not use print option.
Please help me getting solution.

Have you updated your version of Adobe Reader?

Php form processing script

Hi. I got a program to write a php form processing script. My submit form is for photo submission to my domain email. I published to site and did a test to see if it works i got this error:
Warning: require_once(F:\Domains\mydomain\mydomain.com\wwwroot/includes/Upload_Photos-lib.php): failed to open stream: No such file or directory in F:\Domains\mydomain\mydomain.com\wwwroot\Upload_Photos.php on line 24 Fatal error: require_once(): Failed opening required 'F:\Domains\mydomain\mydomain.com\wwwroot/includes/Upload_Photos-lib.php' (include_path='.;C:\php\pear') in F:\Domains\mydomain\mydomain.com\wwwroot\Upload_Photos.php on line 24
What does this mean? How can i solve this so that i can process my form?

See if the below form helps: You need to create a folder on your server named - upload - this is where any files uploaded will be stored (make sure the folder is writable. Also change the email address where the information that someone who has uploaded a file will go to. Look for the following in the code: $to ="XXXXXXXXXXXX.com";
<!DOCTYPE html>
<head>
<meta charset="UTF-8" />
<title>Untitled Document</title>
<style type="text/css">
#wrapper {
width: 400px;
margin: 0 auto;
</style>
</head>
<body>
<div id="wrapper">
<?php if(isset($_POST['submit'])) {
$name = trim($_POST['name']);
if(empty($name)) {
$error['name'] = "Please provide your name";
$location = trim($_POST['location']);
if(empty($location)) {
$error['location'] = "Please provide your location";
$email = trim($_POST['email']);
if(empty($email)) {
$error['email'] = "Please provide your email";
$category_description = trim($_POST['category_description']);
if(empty($category_description)) {
$error['category_description'] = "Please provide the category or description";
$terms_conditions = trim($_POST['terms_conditions']);
if(empty($terms_conditions)) {
$error['terms_conditions'] = "Please accept the terms & conditions";
$allowedExts = array(
   "doc",
"docx",
        "rtf",
        "txt",
        "pdf",
        "jpeg",
        "jpg",
$allowedMimeTypes = array(
'application/msword',
        'application/vnd.openxmlformats-officedocument.wordprocessingml.document',
        'application/rtf',
        'application/x-rtf',
        'text/richtext',
        'text/rtf',
        'application/plain',
'application/pdf',
'image/gif',
'image/jpeg',
$extension = end(explode(".", $_FILES["file"]["name"]));
if (empty($_FILES["file"]["name"])) {
    $selectFile = 'Please select a file to upload';
elseif ( ! ( in_array($extension, $allowedExts ) ) ) {
$fileTypeNotAllowed = 'File type not allowed';
elseif ($_FILES["file"]["size"] > 2097152) {
$fileTooLarge = 'Please provide a smaller file';
elseif (file_exists("upload/" . $_FILES["file"]["name"])) {
$fileExists = $_FILES["file"]["name"] . " already exists, Please change the file name ";
elseif (in_array( $_FILES["file"]["type"], $allowedMimeTypes ) )
    if(!empty($_POST['terms_conditions'])) {
move_uploaded_file($_FILES["file"]["tmp_name"], "upload/" . $_FILES["file"]["name"]);
    $fileName = $_FILES["file"]["name"];
    $fileUploadSuccessful = 'File uploaded successfully';
$to = "XXXXXXXXXXXXX.com";
$subject   = "Upload to website";
$headers = "From: $email\r\n";
$headers .= "Reply-To: $email\r\n";
$message = "Name: $name\n\n";
$message .= "Location: $location\n\n";
$message .= "Email Address: $email\n\n";
$message .= "Category/Description: $category_description\n\n";
$message .= "File: $fileName\n\n";
mail($to, $subject, $message, $headers);
$sent = "Mail was sent successfully";
?>
<h1>Form</h1>
<?php
foreach ($error as $value) {
    echo "<p>".$value."</p>";
if(isset($formFieldError)) {
echo "<p>".$formFieldError."</p>";
if(isset($selectFile)) {
echo "<p>".$selectFile."</p>";
if(isset($fileTypeNotAllowed)) {
echo "<p>".$fileTypeNotAllowed."</p>";
if(isset($fileTooLarge)) {
echo "<p>".$fileTooLarge."</p>";
if(isset($fileExists)) {
echo "<p>".$fileExists."</p>";
if(isset($fileUploadSuccessful)) {
echo "<p>".$fileUploadSuccessful."</p>";
?>
<form action="upload_file.php" method="post"
enctype="multipart/form-data">
<p>
<label for="name">Name<br>
<input type="text" name="name" id="name" value="<?php if(isset($name)) {echo $name; } ?>"/>
</label>
</p>
<p>
<label for="location">Location<br>
<input type="text" name="location" id="location" value="<?php if(isset($location)) {echo $location; } ?>"/>
</label>
</p>
<p>
<label for="email">Email<br>
<input type="text" name="email" id="email" value="<?php if(isset($email)) {echo $email; } ?>" />
</label>
</p>
<p>
<label for="category_description">Category and Description<br>
<input type="text" name="category_description" id="category_description" value="<?php if(isset($category_description)) {echo $category_description; } ?>" />
</label>
</p>
<p>
<label for="file">File Attachment:<br>
<input type="file" name="file" id="file" />
</label>
</p>
<p>
<label for="terms_conditions">Terms & Conditions:
<input name="terms_conditions" type="checkbox" value="accept" <?php if(isset($_POST['terms_conditions'])) {echo "checked"; } ?>> (Please check)
</label>
</p>
<input type="submit" name="submit" value="Submit" />
</form>
</div>
</body>
</html>

Location of Labels

Similar Messages

Maybe you are looking for