Location of single files in garageband 08

hi, i need to grab hold of one of many recorded file in a garageband project in order to put it to use in another project in antother program. how do I locate the single files in my garageband project?
best
tellef, oslo

solo the track, turn on the cycle region button and set the yellow bar to exactly encompass the area you want, and then export.

Similar Messages

  • I moved my source videos and now I need to locate every single file...

    Is there an easier way to just change the directory for example to where all my videos clips are now located?
    Or do I really have to point to the exact file for each and every one?

    farmerdwightks
    The major thought is that, when you import media into a project, what you have in the project are just copies of the originals that were saved to the computer hard drive. In order for the project to work, it must trace back to its source media at the hard drive save location where they were imported from. If not, the horror stories of Media Offline.
    Everything would be very easy for you if you can get your project from the laptop in a Copied Folder generated by the laptop's Premiere Elements File Menu/Project Archiver/Copy option. That Copied folder will contain the project file (project.prel) plus copies of the source media that were imported into the project (whether just into Projects Assets or actually used on the Timeline).
    http://help.adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7d cb.html
    Matters can be complicated if the above does not exist. It can come to "Where is the file....?" for reconnecting links between project and source media at its new location on the main computer. In this scenario you just have to get lucky and hope that the program will reconnect more than one missing piece as you labor through one of these messages at a time. You could click Skip All on the first to get into the project. But then you still have to do the reconnects.
    The Replace Footage is an interesting alternative to the "Where is the file....?" messages. But, best take your chances with the latter before testing out Replace Footage
    http://atr935.blogspot.com/2013/04/pe11-replace-footage.html
    Please let us know the outcome.
    Thanks.
    ATR

  • Multiple directory locations in Sender File adapter

    Hi All,
              I have a scenario where my single adapter needs to poll from 7 different directory locations. Is it posible to configure all seven sorce directory location in single sender file adapter.
    Regards,
    Xier

    Hi,
    I apologize for wrong information, actually I never tried but it's possible after seeing this.
    Note:821267
    11. File Sender: Processing Multiple Source Directories
    Q: Can the File Sender Adapter be configured to poll multiple source directories from a single channel?
    A: This functionality is available starting with XI 3.0 Support Package 14 as well as PI 7.0.
    raj.

  • How to compile a single file in a project

    I have placed my java connector file called "xxxTargetconnector .class" in the below mentioned path
    D:\FSCM9DMO\webserv\FSCMDMO9\applications\peoplesoft\PSIGW\WEB-INF\classes\com\peoplesoft\pt\integrationgateway\targetconnector
    I have converted the above class file in to a java file using a decompiler.Now i would like to recompile the java file to get the byte code.This class file imports many class files from jar files which is placed in the below mentioned path.
    D:\FSCM9DMO\webserv\Cybersource.
    Before compiling i set the path to include the jar files
    for ex , set path = D:\FSCM9DMO\webserv\Cybersource
    For compilation i went to the below path using command prompt and compiled the particular file.
    D:\FSCM9DMO\webserv\FSCMDMO9\applications\peoplesoft\PSIGW\WEB-INF\classes\com\peoplesoft\pt\integrationgateway\targetconnector>javac xxxTargetConnector.java
    Unfortunately i got around 99 errors saying
    xxxTargetConnector.java:187: cannot find symbol
    symbol : variable Logger
    location: class com.peoplesoft.pt.integrationgateway.targetconnector.xxxTargetConnector
    How to compile a single file in a project ?

    According to [http://java.sun.com/javase/6/docs/technotes/tools/windows/javac.html], "As a special convenience, a class path element containing a basename of * is considered equivalent to specifying a list of all the files in the directory with the extension .jar or .JAR. I have never tried using this feature.
    So if all of your dependent classes are in in jar files that are in D:\FSCM9DMO\webserv\Cybersource, a command like the following should work.
    javac -cp D:\FSCM9DMO\webserv\Cybersource\* xxxTargetConnector.java
    Note that setting your operating system path variable has no impact on where Javac looks for dependent classes.

  • How to attach a single file in e-mail (Yosemite)?

    When i am writing a new mail and i try to attach a single file that i have saved a minute ago from certain folder i cannot do that. When i click on the folder to open it and select the specific file to attach, the mail does not open the folder but automatically attach the whole folder to e-mail.
    Any help?
    Thanks.

    Hello dejanfromzagreb,
    That is interesting that it is grabbing the entire folder. Have you tried switching the view within the Finder window to Column View to select the right file to attach? Another alternative is to locate the file in Finder and drag it op top of the Email that you are preparing to attach it. Take a look at the article below. 
    Mail (Yosemite): Add attachments
    https://support.apple.com/kb/PH19142
    Regards,
    -Norm G. 

  • Help! I can't open any files in GarageBand

    I don't know why but every single time I try to open up a music file in GarageBand to try and make it an iPhone ringtone it will not let me. It's upsetting. Anyone think they can help me? I just want some ringtones for my iPhone already. If anyone thinks they can help. Feel free to comment, thanks!

    nesquick_92 wrote:
    I try to open up a music file in GarageBand to try and make it an iPhone ringtone it will not let me.
    http://www.bulletsandbones.com/GB/GBFAQ.html#importaudio
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Search multiple folders and muiltiple files and combine to single file

     I want to search multiple folders for muliple files and combine to single file name. The files I'm searching have same format, but where named
    differently in each of there processes. Now I want to combine based upon -SearchFor .. I'm having a problem with -Filter $SearchFor
    Code:
    Function Search-Files{
    Param([String[]]$Locations,[String[]]$SearchFor, $AppendTo)
    Begin
    If(-Not (Test-Path $AppendTo)){New-Item $AppendTo -ItemType File -Force}
    Process
    ForEach($Location in $Locations)
    $Files = Get-ChildItem -Path $Location -Filter $SearchFor -Recurse
    ForEach($File in $Files)
    Get-Content -Path $FIles.FullName | Out-File $AppendTo -Append
    End{}
    Search-Files -Locations "\\servera\public\t1\usa\saleshist\","\\serverb\public\t2\usa\saleshist\",-SearchFor "dodetail-cm.txt","somstr.txt",-AppendTo "\\virt1\Saleshist_data_load_files\saleshdr.load.csv"

    I think you might want to use -Include instead of -Filter.  Your -Include parameter accepts wildcards, i.e. *.docx or *somstr.txt
    Your command to actually append the content should be:
    Get-Content -Path $File.FullName | Out-File $AppendTo -Append
    You had $Files.FullName which might behave unexpectedly, if at all.
    Your actual command has several issues.
    Search-Files -Locations "\\servera\public\t1\usa\saleshist\","\\serverb\public\t2\usa\saleshist\" -SearchFor "dodetail-cm.txt","somstr.txt" -AppendTo "\\virt1\Saleshist_data_load_files\saleshdr.load.csv"
    You had commas following the lists of locations and searchfor terms, did that even work? Without seeing your source files or your target file I can only advise you so much, but ideally you would import-csv and export-csv.  Depending on the contents,
    you may be able to get away with get-content and out-file though.
    I hope this post has helped!

  • Single file to multiple IDOC's (on Multiple R3 Clients):

    Hi,
    We have a complex Landscape with multiple (4) businesses (multiple R3) instances and most common R3 --> DEV 4 instances with 5 clients each, QAS 4 instances with 2 clients each with some additional clients, PRD 4 instances with a client each and Training 4 instances with 2 clients each in the Landscape along with BW systems.
    We are trying to implement standard MDM - XI - R3 distribution scenario. Only difference being MDM Production will be the Master distribution client and have to be distributing to all the R3 clients. For those who doesn't know SAP MDM - is Master Data Management Engine and within this scenario the output from MDM is standard XML IDOC file.
    To achieve this syndication is being planned as MDM production to distribute files to 4 businesses to 4 file share folders. These files will be picked up by XI production and will be distributing(Creating IDOCs) on multiple receivers (R3 --> DEV, QAS and PRD) clients of the respective instances.
    The one to one scenario is very simple to build MDM XML file from file adapter to R3 IDOC of IDOC adapter, but for our business it becomes one file to multiple R3 clients (IDOCs) on multiple R3 instances;
    My question is: Is there an easy way to configure single file to mutiple R3 client IDOC receivers scenario? Also there might be additions and deletions of the R3 clients based on business requirements. Is there any proposed or already implemented procedure to achieve this complex distribution?
    We have planned on trying to define a business system for each R3 client (DEV/QAS/PRD) and to have the integration directories configuration built for all the 47 clients that the data needs to be distributed. With IDOC Adapter is this the only way to go? Also, in future if there are additions or deletions of clients it becomes maintenance intensive and there won't be a quick way to stop the distribution?
    Your time and input is appreciated.
    Thanks and Regards,
    -Raj.

    Michal,
    Thanks for your answer and FAQ.
    I think I am confusing everyone with my long messages!
    We already have XI DEV, XI QAS, XI PRD.
    But business requirement for the global harmonization MDM scenario is that MDM PRD should be able to distribute the XML files (IDOC fields in GLMAST01 - IDOC format) to all the DEV, QAS and PRD (R3) systems in the landscape. For this distribution XI is used as the integration partner (File adapter picks up the XML file from MDM file share location and IDOC adapter creates an IDOC on the respective R3).
    For this specific scenario though XI-DEV and XI-QAS systems are present they are available only for testing phase. After the scenario is moved into production, XI-PRD should be able to pick up the XML file from MDM and distribute it to all the DEV, QAS, PRD R3 systems.
    Same file needs to be distributed to 20 DEV clients across 4 DEV instances, 27 QAS clients across 4 QAS instances and 12 PRD/TRN(training clients).
    Yes, as you said in your answer earlier deleting a client from the distribution is removing the client from the receiver determination (and removal of corresponding Interface determination, sender agreement and receiver agreement).
    Addition of a client for distribution is adding the client (business system) in receiver determination (and addition of of corresponding Interface determination, sender agreement and receiver agreement).
    Do I have to maintain all the 59 (Clients from different systems) sets of config within the ID and all the systems in SLD of XI - DEV/QAS/PRD? Even if I do so, Is this the right way to go, defining all the DEV/QAS/PRD clients within all the SLD's of XI -  DEV/QAS/PRD?
    I am not finding an easy way to architect this.
    I appreciate your time and patience.
    Thanks and regards,
    Rajani Kanth Yalamanchili.

  • Saving polymorphic vi as single file

    Is there a way to save polymorphic VIs as single files? As far as I understood, the polimprphic VI is somehow a list of "links" to the different instances. Is there a way to include the instances on the "main" vi, and maybe access them via the polymorphic VI window?
    Thanks

    Hi xdaf,
    I usually solve this issue by this procedure:
    - I have my user.lib files in a different folder (in my local user path) and only edit the palette to include the VIs I need (This way it's much easier to backup all of my VIs.)
    - I usually only put the polymorphic VI into the user.lib. All the single instances are located in a different folder and thus not seen in the user palette.
    Disadvantage of this scheme:
    When I install a new LV version I have to setup my user palette content again. Well, it's just 5 folders in the user palette...
    Message Edited by GerdW on 01-28-2010 03:07 PM
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Search multiple folders for files with same name and create single file

     I have a project where I need to search multiple folders for a file name and when found append data from each file to a single input file.
     Example
    root folder to start search
    \\servera\sales
    \\servera\it\salesa\cmmstr.txt
    \\servera\it\salesb\cmmstr.txt
    \\servera\it\salesc\cmmstr.txt
     I need to create a a single cmmstr.txt on the root folder. I would like it to be able to run this with parms to pass in folders to search and file names to search and single file name to create. I'm going to have a least 10 differnt files to
    search for and create output file for. The folders to search
    will somewhat be static.
     Thanks.

    I tested this out on my own seat and I think it should work for you. I wrote it as a function, all you have to do is pass the root folders you want to search and the file your looking for. The function will then search that directory and all sub directories
    for that file name. you will also have to provide it a file to append to, if the file dosen't exists the function will create it. If you run into an issues let me know and the links Mike
    Laughlin posted are a great resource.
    Function Search-Files{
    Param([String[]]$Locations, $SearchFor, $AppendTo)
    Begin
    If(-Not (Test-Path $AppendTo)){New-Item $AppendTo -ItemType File -Force}
    Process
    ForEach($Location in $Locations)
    $Files = Get-ChildItem -Path $Location -Filter $SearchFor -Recurse
    ForEach($File in $Files)
    Get-Content -Path $FIles.FullName | Out-File $AppendTo -Append
    End{}
    Search-Files -Locations "\\Server1\c$\Temp", "\\Server1\c$\Test1" -SearchFor "Install.cmd" -AppendTo "C:\Temp\Search.log"

  • Importing Movies in iMovie why are they located in a file called Private

    Hi
    I have just plugged my video camera into my macbook. I selected Import from camera and then directed the archive to a connected mypassport drive. The problem is they are now all located in a file called Private.???? How do I extract the files from there to a specific folder please. I plan to have a mypassport drive for all my preedited videos and then store the edited final cut version on my mac. I cant seem to drag the files from this folder to one of my choice.  HELP Please
    Thanks

    AppleMan1958 wrote:
    Now, it still works that way, with a wrinkle. It moves all the files from your camera to the place you specify, but now it places them in a package. The package looks like the archive is a single file, but in reality, it contains all the files and folders as before. To see what is in the package, right click on the package name and select Show Package Contents. You should now see all the folders and files.
    Good point AppleMan. I had forgotten about that wrinkle, even though I've previously mentioned it in other posts. Probably because I generally don't import from Archives, but straight from the camera.
    I use a ShedWorx app called RevolverHD rather than iMovie's built-in Archive feature as it provides for selective archiving of clips. With iMovie the only option is to archive the full contents of the camera (Archive All). As my camera is a 60GB hard drive model (allowing about 8 hours at the highest setting), I tend to keep clips on the drive until I need space for new recordings. Using iMovie for the archive results in duplication, as all the older clips are archived again. It then gets a bit messy keeping track of things if, in the meantime, I've deleted any clips from the camera.
    The only downside to using RevolverHD is that, whilst the archive shows the correct recording date and time, when imported to iMovie the clips show the date and time imported, not the recorded date and time. For this reason, I prefer to import directly from the camera. I understand (from my reading of your posts), that you import from the iMovie archive. Once you are happy with the import you then erase your camera card. So, when next using iMovie's Archive All feature, the new archive will comprise just your new clips. That's probably the ideal process, as it keeps things tidy, imports the correct date and time, and guarantees that the archive is reliable.
    Sorry to move a bit beyond the OP's question, but thought this might be of interest to others here.
    John

  • Unable to locate itunes.msi file

    I am trying to upgrade my iTunes to iTunes 10 and it keeps telling me it is unable to locate the iTunes.msi file. I read the previous posts but the windows installer cleanup utility tool is no longer available to download. I have tried to delete all aspects of iTunes and its programs, plus the recycle bin but it still won't work. Any ideas?

    I read the previous posts but the windows installer cleanup utility tool is no longer available to download.
    Yes, that's the main trouble with .msi errors nowadays. First we have to try to hunt down a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
    Quit out of CleanUp, restart the PC and try reinstalling iTunes again. Does the install go through properly this time? If so, are you able to launch iTunes without the error message?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

    When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

    Anyone can help to advice how to solve this issue ?

  • Recover a single file in Content Services

    I've been asked to document how we would go about recovering a single file in Content Services. The Trash/Archive angle I'm clear on, but what about an extreme case. Lets say that someone created a file, trashed it, emptied the trash, and then it expired from the Archive before the user realized that they needed the file.
    Is it possible, and if so how would one go about getting the file back assuming that there is a full db backup once a day?
    Would enabling BFILE aging help? If so, how?
    On a related note: If archive is set to expire content after 1 month, but BFILE aging is turned off, when does deleted content get purged from the Archive? It's not 1 month, as I have deleted files in the Archive going back to January.

    Archive expiration and BFile aging are orthogonal. BFile pushes the LOBs of documents that are in the archive to bfile. Archive expiration deletes files from the archive after the configured time. If this is not the behaviour you are seeing please file a TAR and they can help check whether your system is configured correctly or if you are running into a bug.
    regards,
    -sancho

  • How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

    how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

    It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

Maybe you are looking for