Log Messages from Transaction Event Logger

I have 4 instances of MII v12.1 and within a transaction I want to add a message to the log when the transaction runs so I can view it through the message logger. All 4 MII instances were installed by the same consultant a few years ago so there "should" be no differences in the log configs. On 3 of the instances this is working fine - I have created a very simple transaction with one Event Logger action configured with a message "Test Message" and when I execute the transaction I see the correct entry in the log viewer. On the fourth however, although the transaction executes without error I am not seeing anything in the viewer for this event. I am using the standard "last 24 hours" log viewer with no filters and no specific log locations selected, and no customisations. I am seeing other system generated messages. I found some documentation about logging and the viewer and I found the Netweaver log config but as far as I can see it looks consistent between the instance which is working and the one which is not working. Is there some other config which needs to be done to enable Event Logging from transactions? My user has the same access across all instances. Any guidance would be appreciated. I attach a screen shot of what I am expecting to see (taken from one of the instances which is working).

Hi Partha
Many thanks for your reply. I have tried this and unfortunately it makes no difference. I also checked on the other instances and found they have their tracing levels all set to error, not Info. I have also noticed that on the instance which is working, in the System Configuration section at the bottom of the Log Config page - for Applications and all sub categories I see the entry .\log\applications_00.log in the Pattern column. On the instance which is not working I see that entry for the Applications root but not for any of the sub categories (even after selecting Copy to subtree). I cannot see where I can set this value (there is no modify function available, even under Administrator login).
Also, when I look at the log messages which have generated when setting the Event Type to Error on the instance which is not working, it shows one entry and the Category and Location columns show <com.sap.xmii.bls.executables.action.logging.LoggingActions>. When I generate an event with type Error on the instance which is working I get 2 log messages, one with the Category and Location <com.sap.xmii.bls.executables.action.logging.LoggingActions> and the other with Category /Applications/XMII/Xacute/Event and Location <com.sap.xmii.bls.executables.action.logging.LoggingActions>.
I guess that the .\log\applications_00.log should be showing for all subtree items under Applications and because it is not then the messages are not going into any application log. Not sure how to fix this however.
I have also reset to the default configuration and it does not change the above.
Best Rgds
Richard

Similar Messages

Log messages from multiple instances in single file.

Hi!
I have a requirement that i need to log messages from muliple instances of the same object in a file. The new file will be created every day. Likewise, multiple objects might have various instances each.
One class
->multiple instances
-> log message stored in single file.
Note :
I am using the Message driven bean. I need to log from the bean class. JDK 1.3
If u could help me out that would be great.

As long as they are all from the same OS program (a single Java VM), that's OK - you can use Log4j, and use a rotating file logger.
If you point two different virtual machine processes at the same file, one may have it open when the other is trying to rotate it, and your rotation may fail (at best) and/or you may lose the old log (the worst case).
If you need to collect log messages from multiple processes (or even multiple machines), use a syslog-based logger (Log4j has a SyslogAppender) or use Log4j's SocketAppender to write to a log4j-builtin log listener (SocketNode).

Re: Remove log messages from loop

CURSOR cur_item_rev_child IS
SELECT ffv.flex_value, --org code
mp.organization_id
FROM fnd_flex_values ffv,
fnd_flex_value_sets ffvs,
mtl_parameters mp
WHERE ffv.flex_value_set_id = ffvs.flex_value_set_id
AND ffvs.flex_value_set_name = 'EMR Add Spec Org' -- Changed by WIPRO on 01-OCT-12 (SR # 1078990 )--
AND NVL(ffv.enabled_flag, 'N') = 'Y'
AND ffv.flex_value = mp.organization_code
AND mp.master_organization_id = v_num_master_org;
CURSOR cur_item_rev (i_num_organization_id NUMBER)
IS
SELECT /*+ index(xvasd XXINV_VLVS_ADD_SPEC_DETAILS_N1 )*/mirb.inventory_item_id,
mirb.organization_id,
MAX(mirb.revision) item_revision,
msib.segment1, -- Added by Infosys on 19-May-09
xvasd.spec_revision spec_revision -- Added by Infosys on 19-May-09
FROM xxinv_vlvs_add_spec_details xvasd,
xxinv_vlvs_item_add_spec xvias,
mtl_parameters mp,
mtl_system_items_b msib,
mtl_item_revisions_b mirb
WHERE xvasd.spec_number = xvias.spec_number
AND xvasd.spec_type = xvias.spec_type
AND xvias.spec_type = v_chr_spec_type
AND xvasd.spec_status='ACTIVE'
AND xvias.inv_item_id = msib.inventory_item_id
AND mirb.inventory_item_id=msib.inventory_item_id
AND xvias.organization_id = msib.organization_id
AND msib.organization_id = mirb.organization_id
AND mirb.organization_id = mp.organization_id
AND mp.organization_id = i_num_organization_id
--AND LPAD (xvasd.spec_revision, 3, 0) LPAD (b.revision, 3, 0)
GROUP BY mirb.inventory_item_id,
mirb.organization_id,
msib.segment1,
xvasd.spec_revision;
BEGIN
o_chr_errbuf := 'Program Completed Successfully';
o_num_retcode := 0;
fnd_file.put_line(fnd_file.output,
fnd_file.put_line(fnd_file.output,
' EMR INV Item Revisions Update Program VLVS');
fnd_file.put_line(fnd_file.output,
fnd_file.put_line(fnd_file.output, '');
--Starting the Program
fnd_file.put_line(fnd_file.LOG,
fnd_file.put_line(fnd_file.LOG,
' EMR INV Item Revisions Update Program VLVS');
fnd_file.put_line(fnd_file.LOG,
fnd_file.put_line(fnd_file.LOG, '');
fnd_file.put_line(fnd_file.LOG, 'Input Parameter');
fnd_file.put_line(fnd_file.LOG, '---------------');
fnd_file.put_line(fnd_file.LOG, 'Debug Mode: ' || v_chr_debug_mode);
fnd_file.put_line(fnd_file.LOG, '');
fnd_file.put_line(fnd_file.LOG,
-- Get the value of the spec type from the lookup. If no value is set then display the error message and raise exception
IF v_chr_spec_type IS NULL
THEN
fnd_file.put_line(fnd_file.LOG,
'Error: Set a value for the profile: XXINV : Additional Spec Type VLVS');
RAISE excp_user;
ELSE
fnd_file.put_line(fnd_file.LOG,
'Processing for the addition spec item type: ' ||
v_chr_spec_type);
END IF;
-- Select all the eligible records for processing
FOR rec_cur_item_rev_child IN cur_item_rev_child
LOOP
FOR rec_cur_item_rev IN cur_item_rev (rec_cur_item_rev_child.organization_id)
LOOP
-- v_chr_spec_rev := NULL;
-- v_chr_item_number := NULL; Commented by Infosys on 19-May-09
/* BEGIN --Start of comments by Infosys on 19-May-09
SELECT segment1
INTO v_chr_item_number
FROM mtl_system_items_b
WHERE inventory_item_id = rec_cur_item_rev.inventory_item_id
AND organization_id=rec_cur_item_rev.organization_id;
EXCEPTION
WHEN NO_DATA_FOUND THEN
v_chr_item_number := NULL;
fnd_file.put_line(fnd_file.LOG,'Item Number not found in MTL_SYSTEM_ITEMS_B Table for the inv item id '
||rec_cur_item_rev.inventory_item_id);
WHEN OTHERS THEN
v_chr_item_number := NULL;
RAISE excp_loop;
END;*/--End of comments by Infosys on 19-May-09
/*BEGIN --Start of comments by Infosys on 19-May-09
SELECT MAX(spec_revision)
INTO v_chr_spec_rev
FROM xxinv_vlvs_add_spec_details xvasd,
xxinv_vlvs_item_add_spec xvias
WHERE xvasd.spec_number = xvias.spec_number
AND xvasd.spec_type = xvias.spec_type
AND xvias.spec_type = v_chr_spec_type
AND xvias.inv_item_id =rec_cur_item_rev.inventory_item_id
AND organization_id=rec_cur_item_rev.organization_id
GROUP BY xvias.inv_item_id,
organization_id,
xvias.spec_type;
EXCEPTION
WHEN NO_DATA_FOUND THEN
v_chr_spec_rev := NULL;
fnd_file.put_line(fnd_file.LOG,'Spec Revision not found in Additional Specs Table for the inv item id '
||rec_cur_item_rev.inventory_item_id);
WHEN OTHERS THEN
v_chr_spec_rev := NULL;
RAISE excp_loop;
END;*/--End of comments by Infosys on 19-May-09
IF LPAD (rec_cur_item_rev.spec_revision, 3, 0) LPAD (rec_cur_item_rev.item_revision, 3, 0)
THEN
BEGIN
v_num_total_cnt := v_num_total_cnt + 1;
--to take count of the total records processed
v_chr_error_flag := 'N'; reset the error flag to N before processing each record
v_num_revision_id := NULL;
IF v_num_total_cnt = 1
THEN
v_chr_output_hdr := 'ORG CODE' ||
RPAD('|ITEM NUMBER', 51, ' ') ||
'|ITEM REV' || '|SPEC REV' ||
'|ERROR REASON';
END IF;
-- Check if the revision on the spec is greater that the revision on the item
IF LPAD (rec_cur_item_rev.spec_revision, 3, 0) > LPAD (rec_cur_item_rev.item_revision, 3, 0)
THEN
BEGIN
SELECT mtl_item_revisions_b_s.NEXTVAL
INTO v_num_revision_id
FROM DUAL;
EXCEPTION
WHEN OTHERS THEN
v_chr_temp_msg := 'Error when getting the new revision id from the sequence MTL_ITEM_REVISIONS_B_S: ' ||
SQLERRM;
RAISE excp_loop;
END;
-- begin block for assigning values and calling API to update the item revisions
BEGIN
v_rec_item_revision.inventory_item_id := rec_cur_item_rev.inventory_item_id;
v_rec_item_revision.organization_id := rec_cur_item_rev_child.organization_id;
v_rec_item_revision.revision_id := v_num_revision_id;
v_rec_item_revision.revision := rec_cur_item_rev.spec_revision;--v_chr_spec_rev;
v_rec_item_revision.revision_label := rec_cur_item_rev.spec_revision;--v_chr_spec_rev;
v_rec_item_revision.revision_reason := 'Updated the Item Revision';
v_rec_item_revision.implementation_date := v_dte_sysdate;
v_rec_item_revision.effectivity_date := v_dte_sysdate;
v_rec_item_revision.attribute_category := NULL;
v_rec_item_revision.attribute1 := NULL;
v_rec_item_revision.attribute2 := NULL;
v_rec_item_revision.attribute3 := NULL;
v_rec_item_revision.attribute4 := NULL;
v_rec_item_revision.attribute5 := NULL;
v_rec_item_revision.attribute6 := NULL;
v_rec_item_revision.attribute7 := NULL;
v_rec_item_revision.attribute8 := NULL;
v_rec_item_revision.attribute9 := NULL;
v_rec_item_revision.attribute10 := NULL;
v_rec_item_revision.attribute11 := NULL;
v_rec_item_revision.attribute12 := NULL;
v_rec_item_revision.attribute13 := NULL;
v_rec_item_revision.attribute14 := NULL;
v_rec_item_revision.attribute15 := NULL;
v_rec_item_revision.description := NULL;
v_rec_item_revision.creation_date := v_dte_sysdate;
v_rec_item_revision.created_by := v_num_user_id;
v_rec_item_revision.last_update_date := v_dte_sysdate;
v_rec_item_revision.last_updated_by := v_num_user_id;
v_rec_item_revision.last_update_login := v_num_login_id;
v_rec_item_revision.request_id := v_num_request_id;
v_rec_item_revision.program_id := v_num_program_id;
v_rec_item_revision.program_application_id := v_num_prog_appln_id;
mtl_item_revisions_util.insert_row(p_item_revision_rec => v_rec_item_revision,
x_rowid => v_chr_ret_rowid);
v_num_succ_cnt := v_num_succ_cnt + 1;
COMMIT;
EXCEPTION
WHEN OTHERS THEN
v_chr_temp_msg := 'Error when updating the revisions: ' ||
SQLERRM;
RAISE excp_loop;
END;
ELSE -- LPAD (cur_item_rev.spec_revision, 3, 0) < LPAD (cur_item_rev.item_revision, 3, 0)
v_chr_temp_msg := 'Item Revision is greater than the Spec Revision';
o_num_retcode := 1;
v_num_err_cnt := v_num_err_cnt + 1;
ROLLBACK;
fnd_file.put_line(fnd_file.LOG, '');
fnd_file.put_line(fnd_file.LOG,
'Organization Code: ' ||
rec_cur_item_rev_child.flex_value); -- added on 05-May-09 by infosys --
fnd_file.put_line(fnd_file.LOG,
'Item Number: ' ||
rec_cur_item_rev.segment1);
fnd_file.put_line(fnd_file.LOG,
'Item Revision: ' ||
rec_cur_item_rev.item_revision); -- v_chr_item_revision_child -- -- added on 05-May-09 by infosys --
fnd_file.put_line(fnd_file.LOG,
'Spec Revision: ' ||
rec_cur_item_rev.spec_revision);
fnd_file.put_line(fnd_file.LOG,
'Error: ' ||
v_chr_temp_msg);
fnd_file.put_line(fnd_file.LOG,
v_chr_output_msg := v_chr_output_msg ||
RPAD(rec_cur_item_rev_child.flex_value, -- added on 05-May-09 by infosys --
8,
' ') || '|' ||
RPAD(rec_cur_item_rev.segment1,
50,
' ') || '|' ||
RPAD(rec_cur_item_rev.item_revision, v_chr_item_revision_child, added on 05-May-09 by infosys --
8,
' ') || '|' ||
RPAD(rec_cur_item_rev.spec_revision,
8,
' ') || '|' ||
v_chr_temp_msg ||
CHR(10);
v_chr_mail_body := v_chr_mail_body ||
RPAD(rec_cur_item_rev_child.flex_value, -- added on 05-May-09 by infosys --
8,
' ') || '|' ||
RPAD(rec_cur_item_rev.segment1,
50,
' ') || '|' ||
RPAD(rec_cur_item_rev.item_revision, v_chr_item_revision_child added on 05-May-09 by infosys --
8,
' ') || '|' ||
RPAD(rec_cur_item_rev.spec_revision,
8,
' ') || '|' ||
v_chr_temp_msg ||
-- Display the statistics details in the output file
fnd_file.put_line(fnd_file.output, '');
fnd_file.put_line(fnd_file.output,
'Number of items selected for update: ' ||
v_num_total_cnt);
fnd_file.put_line(fnd_file.output,
'Number of items updated: ' || v_num_succ_cnt);
fnd_file.put_line(fnd_file.output,
'Number of items not updated: ' || v_num_err_cnt);
fnd_file.put_line(fnd_file.output, '');
fnd_file.put_line(fnd_file.output, v_chr_output_hdr);
* Print out the output message from CLOB variable "v_chr_output_msg"
* Substr each line whenever we find the separator CHR(10)
* Print each line with fnd_file.output function
BEGIN
v_num_offset := 1;
v_num_instr := 0;
LOOP
EXIT WHEN v_num_offset > dbms_lob.getlength(v_chr_output_msg);
-- Get the position of CHR(10) when first time appearence.
v_num_instr := dbms_lob.instr(v_chr_output_msg,
CHR(10),
v_num_offset,
1);
v_num_line_length := v_num_instr - v_num_offset + 1;
-- Substr the each line and print it out
fnd_file.put_line(fnd_file.output,
dbms_lob.substr(v_chr_output_msg,
v_num_line_length - 1,
v_num_offset));
v_num_offset := v_num_offset + v_num_line_length;
END LOOP;
END;
END IF; -- LPAD (cur_item_rev.spec_revision, 3, 0) < LPAD (cur_item_rev.item_revision, 3, 0) --
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
fnd_file.put_line(fnd_file.LOG,
'Porcessing next record as a Error occured in cursor loop cur_item_rev : ' ||
SQLERRM);
END;
END IF;
END LOOP; -- cur_item_rev --
END LOOP; -- cur_item_rev_child --
-- calling the mail procedure --
IF v_num_err_cnt > 0
THEN
BEGIN
fnd_file.put_line(fnd_file.LOG, '');
fnd_file.put_line(fnd_file.LOG,
'Calling send_notification Procedure...');
send_notification(o_chr_ret_code => v_chr_status,
o_chr_ret_mesg => v_chr_temp_msg,
i_chr_subject => 'EMR INV Item Revisions Update Program VLVS - ' ||
v_dte_sysdate,
i_chr_body => v_chr_mail_body);
EXCEPTION
WHEN OTHERS THEN
v_chr_temp_msg := 'Error when calling Procedure send_notification .';
fnd_file.put_line(fnd_file.LOG,
'Error details : ' || v_chr_temp_msg ||
' - ' || SQLERRM);
RAISE excp_user;
END;
END IF;
EXCEPTION
/*WHEN excp_loop THEN
ROLLBACK;
o_chr_errbuf := o_chr_errbuf ||
'Program completed with error when getting the max revision';
o_num_retcode := 2;*/
WHEN excp_user THEN
ROLLBACK;
o_chr_errbuf := o_chr_errbuf || 'Program completed with error';
o_num_retcode := 2;
WHEN OTHERS THEN
ROLLBACK;
fnd_file.put_line(fnd_file.LOG,
'Error in Item Revisions Update Program: ' ||
SQLERRM);
o_chr_errbuf := o_chr_errbuf || 'Program completed with error';
o_num_retcode := 2;
END update_item_revision;

I need to remove the log messages from loop...As currently log file printing is in loop....Can you please tell how to remove log file messages from loop.

WAP371: Log message from AP

Hi,
I constantly have this log message comming from my wifi access point. How can I do to fix this issue.
Most of the LAN devices are Phone, Tablet that goes in sleep mode. I read previous message that says that the WAP371 device has difficuty to manage those devices (Phone, Tablet...).
How to desable those messages without giving up log and service continuity?
Thanks.
Vandman
The log are under this message.
Log Message from AP (IP OF the WAP371 device)
TIME Priority Process Id Message
========================================================================
Apr 27 2015 09:3 3 hostapd[1757] trying to update accounting statistics, station (MAC addresse of a device) not found

Hi Kuba,
The following works fine for adding messages in the trace, but ONLY when the trace string (the first argument in the trace method) is currently active (see System Administration screen).
For the example below to show up in your trace files, the active trace section should be (at least) "someTraceString".
Report.trace( "someTraceString", "some message", e );
Logging something with Report.info() should write the message to the UCM log files (@ $domain_home/ucm/cs/weblayout/groups/secure/logs/).
Fabian

Lots of system log messages from nsurlstoraged, also systemstatsd

I'm running Yosemite (10.10.2) on an old Mini (details below). I am not having particular problems with slowness, crashes, etc., but I'm seeing repeated messages in the System Log which seem to be errors:
nsurlstoraged[300]: ERROR: shrinkDB - shrink of file system cache did not fully complete. Result: 11
systemstatsd[1286]: assertion failed: 14C1514: systemstatsd + 3283 [A886B71F-3A31-3324-9B30-5143FDF4ECCB]: 0xb
For at least the past 2 days, the systemstatsd messages have the exact same values. When the computer is in active use, I get 2 of them every 3 to 4 minutes.
The nsurlstoraged messages are a little more frequent but don't have such a clear pattern. Some other messages from that source which are interspersed with the above message include the following:
nsurlstoraged[1263]: realpath() returned NULL for /var/root/Library/Caches/ocspd
nsurlstoraged[1263]: The read-connection to the DB=/var/root/Library/Caches/ocspd/Cache.db is NOT valid. Unable to determine schema version.
nsurlstoraged[1263]: ERROR: unable to determine file-system usage for FS-backed cache at /var/root/Library/Caches/ocspd/fsCachedData. Errno=13
Should I be concerned about resolving these, or can I just ignore them? I did run the string of commands provided in the forum by Linc which are intended to reset the privileges on everything in my home directory to the default values, and I also ran the password reset process via the recovery partition to reset the ACLs.
Just a few quick notes about my system:
- the volume My Mac system (external) is not the system or boot disk. It has most of my image files (including iPhoto libraries) plus the iTunes Media folder. I did not run any commands there to reset file/directory permissions.
- the volume Macintosh HD is the system disk and contains my home directory.
- I am planning to upgrade from to 4 GB to 8 GB RAM.
Thanks very much for any insight into these messages!
Dave
EtreCheck version: 2.1.8 (121)
Report generated April 7, 2015 at 9:11:16 PM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    Mac mini (Early 2009) (Technical Specifications)
    Mac mini - model: Macmini3,1
    1 2.26 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 9400 - VRAM: 256 MB
        Acer P191W 1440 x 900 @ 60 Hz
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: one day 22:49:30
Disk Information: ℹ️
    Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        disk0s2 (disk0s2) <not mounted> : 249.20 GB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    OPTIARC DVD RW AD-5670S
USB Information: ℹ️
    Generic Mass Storage Device
    Logitech Trackball
    Newer Tech miniStack Classic 2 TB
        disk2s1 (disk2s1) <not mounted> : 210 MB
        disk2s2 (disk2s2) <not mounted> : 249.25 GB
        My Mac Time Machine (disk2s3) /Volumes/My Mac Time Machine : 1.50 TB (831.73 GB free)
    Canon iP4300
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Firewire Information: ℹ️
    OWC Mercury Elite Pro Quad USB 3 800mbit - 800mbit max
        EFI (disk1s1) <not mounted> : 210 MB
        Macintosh HD (disk1s2) / : 319.21 GB (96.14 GB free)
        Recovery HD (disk1s3) <not mounted> [Recovery]: 650 MB
        My Mac system (external) (disk1s4) /Volumes/My Mac system (external) : 499.46 GB (174.98 GB free)
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/TechTool Pro 7.app
    [not loaded]    com.micromat.driver.spdKernel (1 - SDK 10.8) [Click for support]
    [not loaded]    com.micromat.driver.spdKernel-10-8 (1 - SDK 10.8) [Click for support]
        /Library/StartupItems/BRESINKx86Monitoring
    [not loaded]    com.bresink.driver.BRESINKx86Monitoring (9.0) [Click for support]
        /System/Library/Extensions
    [loaded]    com.microsoft.driver.MicrosoftKeyboard (8.2) [Click for support]
        /System/Library/Extensions/MicrosoftKeyboard.kext/Contents/PlugIns
    [loaded]    com.microsoft.driver.MicrosoftKeyboardBluetooth (8.2) [Click for support]
    [not loaded]    com.microsoft.driver.MicrosoftKeyboardUSB (8.2) [Click for support]
        /Users/[redacted]/Downloads/LCC Installer.app
    [not loaded]    com.Logitech.Control Center.HID Driver (3.5.1 - SDK 10.0) [Click for support]
Startup Items: ℹ️
    Executor: Path: /Library/StartupItems/Executor
    Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.cmfsyncagent.plist
    [killed]    com.apple.coreservices.appleid.authentication.plist
    [killed]    com.apple.EscrowSecurityAlert.plist
    [killed]    com.apple.sbd.plist
    [killed]    com.apple.scopedbookmarkagent.xpc.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    [killed]    com.apple.xpc.loginitemregisterd.plist
    9 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.ifdreader.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.softwareupdate_download_service.plist
    [killed]    com.apple.xpc.smd.plist
    [killed]    org.cups.cupsd.plist
    6 processes killed due to memory pressure
Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.micromat.TechToolProAgent.plist [Click for support]
    [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.bombich.ccc.plist [Click for support]
    [running]    com.crashplan.engine.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [running]    com.micromat.TechToolProDaemon.plist [Click for support]
    [failed]    com.nalpeiron.netpro.plist [Click for support]
    [loaded]    com.prosofteng.DriveGenius.locum.plist [Click for support]
    [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
    [failed]    com.adobe.ARM.[...].plist [Click for support]
    [failed]    com.amazon.cloud-player.plist [Click for support]
    [running]    com.amazon.music.plist [Click for support]
    [failed]    [email protected]
    [failed]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support] [Click for details]
    [failed]    com.google.GoogleContactSyncAgent.plist [Click for support]
    [failed]    com.plexapp.helper.plist [Click for support]
    [failed]    com.yahoo.YahooContactSyncAgent.plist [Click for support]
    [loaded]    net.jonstovell.keepMinasTirithdata(external)Spinning.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    MiniUsage    Application (/Applications/MiniUsage.app)
    Alfred    Application (/Applications/Alfred.app)
    OpenDNS Updater    Application Hidden (/Applications/OpenDNS Updater.app)
    CrashPlan menu bar    Application (/Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app)
    OneDrive    Application (/Applications/OneDrive.app)
Internet Plug-ins: ℹ️
    Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    EPPEX Plugin: Version: 4.1.0.0 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    Silverlight: Version: 5.1.20125.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    Picasa: Version: 1.0 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
    feedly
    Add to Google Reader
    FlickrPlus
    Ultimate Status Bar
    Exposer
    Evernote Web Clipper
    InvisibleHand
    Turn Off the Lights
    The New York Times
    Procrastinate
    Better Facebook
    Save to Pocket
    Print Plus
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    Microsoft Keyboard [Click for support]
    TechTool Protection [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        My Mac system (external): Disk size: 499.46 GB Disk used: 324.48 GB
        Macintosh HD: Disk size: 319.21 GB Disk used: 223.07 GB
    Destinations:
        My Mac Time Machine [Local]
        Total size: 1.50 TB
        Total number of backups: 59
        Oldest backup: 2013-12-04 08:43:17 +0000
        Last backup: 2015-04-05 15:12:17 +0000
        Size of backup disk: Too small
            Backup size 1.50 TB < (Disk used 547.55 GB X 3)
Top Processes by CPU: ℹ️
         4%    top
         2%    WindowServer
         2%    systemstatsd
         1%    Safari
         0%    MiniUsage
Top Processes by Memory: ℹ️
    266 MB    CrashPlanService
    112 MB    Mail
    86 MB    Finder
    82 MB    Console
    69 MB    Safari
Virtual Memory Information: ℹ️
    106 MB    Free RAM
    983 MB    Active RAM
    895 MB    Inactive RAM
    870 MB    Wired RAM
    17.28 GB    Page-ins
    506 MB    Page-outs
Diagnostics Information: ℹ️
    Apr 6, 2015, 08:15:21 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.MailServiceAgent_201 5-04-06-201521_[redacted].crash
    Apr 5, 2015, 10:35:53 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/QuickLookSatellite_2015-04-05- 223553_[redacted].crash
    Apr 5, 2015, 10:35:52 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/QuickLookSatellite_2015-04-05- 223552_[redacted].crash
    Apr 5, 2015, 10:16:51 PM    Self test - passed
    Apr 5, 2015, 03:58:09 PM    /Library/Logs/DiagnosticReports/CrashPlanService_2015-04-05-155809_[redacted].c pu_resource.diag [Click for details]

I switched over to an early 2008 20-inch iMac (booting from same external disk) and the "ERROR:shrink DB" and "assertion failed" messages are continuing, so I doubt that it is related to the hardware unless it's the external drive itself or the Firewire cable.
Any help would be appreciated...

GUI receiving log messages from JMS

Hi,
I have three classes: GUI, EventListener and JMSListener. What I want to do is to create a login dialog. The user enters his username and password, presses the login button and waits (as this process can take a while). While waiting, he can see log messages sent via JMS.
I set up a TextListener (in my case a JMSListener) and a subscriber like it is described here: http://java.sun.com/products/jms/tutorial/1_3_1-fcs/doc/client.html#1027256.
But the JMSListener never gets any message although the connection is set up correctly (this is just a guess as no exception is thrown). I think that this is a GUI problem. Because if only the JMSListener is running, it does receive messages. Is it possible that the GUI blocks somehow?
Here is some code... First the class that holds the main method:
package de.dtnet.client.run;
import javax.swing.JFrame;
import javax.swing.SwingUtilities;
import javax.swing.UIManager;
import de.dtnet.client.gui.SWDemoGUI;
import de.dtnet.client.listener.SWDemoEventlistener;
public class SWDemoClient {
    private static SWDemoGUI swdemo = null;
     * @param args
    public static void main(String[] args) {
        swdemo = new SWDemoGUI();
        SWDemoEventlistener listener = new SWDemoEventlistener(swdemo);
        swdemo.registerEventlistener(listener);
}The code from the GUI (only the important parts):
package de.dtnet.client.gui;
import de.dtnet.client.listener.SWDemoEventlistener;
public class SWDemoGUI extends JFrame implements Serializable {
    private static final long serialVersionUID = 1L;
     * Default constructor
    public SWDemoGUI() {
        initialize();
     * Creates widget objects and puts everything together
    public void initialize() {
        // GUI with JTextPane for log messages
    public void logOK(String msg) {
        log(OK, msg);
    public void logInfo(String msg) {
        log(INFO, msg);
    public void logWarning(String msg) {
        log(WARNING, msg);
    public void logError(String msg) {
        log(ERROR, msg);
    public void log(String level, String msg) {
        StyledDocument doc = messagesTextPane.getStyledDocument();
        try {
            doc.insertString(doc.getLength(), msg + "\n", doc.getStyle(level));
        } catch (BadLocationException e) {
            // TODO Auto-generated catch block
            e.printStackTrace();
        messagesTextPane.setCaretPosition(doc.getLength());
    public void registerEventlistener(SWDemoEventlistener listener) {
        loginBtn.addActionListener(listener);
        usernameTxt.addFocusListener(listener);
        passwordField.addFocusListener(listener);
}The enventlistener:
package de.dtnet.client.listener;
// imports
public class SWDemoEventlistener implements ActionListener, FocusListener {
    private SWDemoGUI gui = null;
    private String logLevel = null;
    private String logMessage = null;
    private TopicConnectionFactory conFactory = null;
    private TopicConnection connection = null;
    private TopicSession topicSession = null;
    private Topic topic = null;
    private TopicSubscriber subscriber = null;
    public SWDemoEventlistener(SWDemoGUI gui) {
        this.gui = gui;
        initJMS();
    private InitialContext getInitialContext() {
        // set the properties for the InitalContext
        Properties env = new Properties( );
        env.put("java.naming.provider.url",
                "jnp://localhost:1099");
        env.put("java.naming.factory.initial",
                "org.jnp.interfaces.NamingContextFactory");
        env.put("java.naming.factory.url.pkgs", "org.jnp.interfaces");
        try {
            // initalize and return the InitalContext with
            // the specified properties
            return new InitialContext(env);
        } catch (NamingException ne) {
            System.out.println("NamingException: " + ne);
        return null;
    private void initJMS() {
        try {
            // Obtain a JNDI connection
            InitialContext jndi = getInitialContext();
            Object ref = jndi.lookup("ConnectionFactory");
            // Look up a JMS connection factory
            conFactory = (TopicConnectionFactory) PortableRemoteObject.narrow(
                    ref, TopicConnectionFactory.class);
            // Create a JMS connection
            connection = conFactory.createTopicConnection();
            // Create a JMS session objects
            topicSession = connection.createTopicSession(
                    false, Session.AUTO_ACKNOWLEDGE);
            // Look up a JMS topic
            topic = (Topic) jndi.lookup("topic/testTopic");
        } catch (NamingException e) {
            // TODO Auto-generated catch block
            e.printStackTrace();
        } catch (JMSException e) {
            // TODO Auto-generated catch block
            e.printStackTrace();
    public void actionPerformed(ActionEvent e) {
        if (e.getSource() == gui.getLoginButton()) {
            // Do some authentication stuff etc.
            /* Now awaitening messages from JMS */
            subscribe(sessionID);
    public void subscribe(Long sessionID) {
        String selector = "SessionID='" + sessionID.toString() + "'";
        gui.logInfo("Selector: " + selector);
        try {
            //subscriber = topicSession.createSubscriber(topic, selector, true);
            subscriber = topicSession.createSubscriber(topic);
            JMSListener listener = new JMSListener(gui);
            subscriber.setMessageListener(listener);
            connection.start();
            gui.logOK("Verbindung zu JMS erfolgreich");
        } catch (JMSException e) {
            // TODO Auto-generated catch block
            e.printStackTrace();
}and finally the JMSListener:
ackage de.dtnet.client.listener;
public class JMSListener implements MessageListener {
    private SWDemoGUI gui = null;
    private String logLevel = null;
    private String logMessage = null;
    public JMSListener(SWDemoGUI gui) {
        super();
        this.gui = gui;
    public void onMessage(Message incomingMessage) {
        System.out.println("You got message!");
        try {
            MapMessage msg = (MapMessage) incomingMessage;
            logMessage = msg.getString("Message");
            logLevel = msg.getString("Level");
        } catch (JMSException e) {
            e.printStackTrace();
        Runnable logTopicMessage = new Runnable() {
            public void run() {
                System.out.println("Now updating the GUI");
                gui.log(logLevel, logMessage);
        SwingUtilities.invokeLater(logTopicMessage);
        System.out.println("Message fully retrieved!");
}I spent a whole day on this and I'm really becoming desperate as I can't see where the problem is and my time is running out (this is for my diploma thesis)! Does anyone of you? Please!
Thank you!
-Danny

Hello Veronica4468,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Messages and SMS:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Table that stores the application logs messages for transaction CRMD_ORDER

Hi Guru's,
I would like to know which CRM table that is used to store application logs (consist of error / warning / information messages) in transaction CRMD_ORDER? I would like to retrieve the text messages of the application log.
Thanks.

Hi there,
The logs are on tables BALHDR (header) and BALDAT (detail).
In BALHDR you can fill OBJECT with 'CRM_DOCUMENT' and EXTNUMBER with the document GUID (you can obtain it in CRMD_ORDERADM_H table).
The BALDAT is a cluster table, so the information is a little 'encoded' there for direct consulting without abap code.
Alternatively, you can use FM APPL_LOG_READ_DB to read the messages that are contained in any CRM document.
Kind regards,

Formatting Log message for Java.Util.Logger

Hi,
I want to format out put that i get when i logg the message
example
Sep 23, 2009 5:32:56 PM com.log.utils.helper info
INFO: in Logging messagingI was wondering if I could get output like
Sep 23, 2009 5:32:56 PM INFO: in Logging messagingThis is the code which i have used to generate logs
public Logger logs() {
        makeLogFolder();
        Logger log = Logger.getLogger(UtilityHelper.class.getName());
        try {
            int limit = Integer.parseInt(loadProperties(
Constants.PROPERTY_FILE_NAME)
.getProperty(Constants.MAX_SIZE_OF_LOG_FILES));
            int numLogFiles = Integer.parseInt(getProperties(
Constants.MAX_NO_OF_LOG_FILES));
            String LogFileName = getProperties(Constants.LOG_FOLDER) +
File.separator + getLogInDate() + File.separator +
getProperties(Constants.LOG_FILE) + getLogDate() +
" " + getLogTime() + "_%g.log";
            FileHandler fh1 = new FileHandler(LogFileName, limit, numLogFiles);
            fh1.setFormatter(new SimpleFormatter());
            log.addHandler(fh1);
        } catch (IOException ex) {
            ex.printStackTrace();
        } catch (SecurityException ex) {
            ex.printStackTrace();
        return log;
log.info(message);please let me know how can i do it
thanks for the reply

Note: This thread was originally posted in the [Java Virtual Machine (JVM)|http://forums.sun.com/forum.jspa?forumID=37] forum, but moved to this forum for closer topic alignment.

Repetitive "Exception during idle processing" log message from servermgrd

Hello,
I'm at my wit's end trying to find the answer to this issue, and I don't have any clue where to begin. In /var/log/system.log, I'm receiving the following message approximately once per minute:
Apr 17 13:51:21 www servermgrd\[83317\]: Exception during idle processing: * -\[NSCFDictionary setObject:forKey:\]: attempt to insert nil value (key: FilePath)
There are usually no other messages in the log near these errors; when other messages are nearby, they are self-explanatory and appear unrelated. The message never changes except for the time stamp and the process ID for servermgrd.
Any suggestions on where to begin would be extremely valuable. Thanks!

check with this:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14</a>

Message From Win Event Viewer - do I have a problem?

I have just got myself a new PC and it keeps crashing. Mooching about in Windows Event Viewer (not that I know what I am doing) I noticed this error:
Date:          15/07/2009 17:47:50
Event ID:      78
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Martin-PC
Description:
Activation context generation failed for "C:\Program Files (x86)\Adobe\Acrobat 9.0\Designer 8.2\FormDesigner.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0. 6001.18000_none_152e7382f3bd50c6.manifest. Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.60 01.18000_none_5cdbaa5a083979cc.manifest.
Does that mean anything to anyone? Have I got a problem with my install?
My PC is based on AMD Phenom x4 CPU with 8GB RAM. and Vista 64 Bit OS
Thanks
Martin
I have CS4

I have the same problem and so do at least a few others from the looks of a few similar posts dotted around the forums. It seems to be caused by an error on 64bit Windows trying to address 32bit DLLs, causing a conflict.
I have found a workaround on one of the Microsoft forums:
http://social.technet.microsoft.com/Forums/en-US/itprovistaapps/thread/a4c36078-6419-4424- 8a43-ff3832786b59
however, installing 3rd party software to hack the code of the Form Designer exe is the kind of thing that makes me nervous. And besides, this is something that Adobe should fix in an update...
For reference: I'm running an Intel Core i7 3GB RAM Vista Ultimate 64Bit OS. Microsoft SQL 2008 is not installed.

Crazy Amount of Log Messages From Kerberos

Feb 11 16:05:33 bentzen.ws krb5kdc[73](info): routing socket readable
Feb 11 16:05:33 bentzen.ws krb5kdc[73](info): routing socket readable
Feb 11 16:05:33 bentzen.ws krb5kdc[73](info): got routing msg type 5(RTM_LOSING) v5
Feb 11 16:05:33 bentzen.ws krb5kdc[73](info): got routing msg type 5(RTM_LOSING) v5
Feb 11 16:05:33 bentzen.ws krb5kdc[73](debug): routing msg not interesting
Feb 11 16:05:33 bentzen.ws krb5kdc[73](debug): routing msg not interesting
Does anyone know what this is, it just appeared on the sixth of february and just spewed ~10000 messages a day.

Having exact the same log, wold like to know to.
Feb 20 11:57:00 user.domain.com krb5kdc[80](debug): routing msg not interesting
Feb 20 11:57:00 user.domain.com krb5kdc[80](debug): routing msg not interesting
Feb 20 11:57:00 user.domain.com krb5kdc[80](info): got routing msg type 5(RTM_LOSING) v5
Feb 20 11:57:00 user.domain.com krb5kdc[80](info): got routing msg type 5(RTM_LOSING) v5
Feb 20 11:57:00 user.domain.com krb5kdc[80](debug): routing msg not interesting
Feb 20 11:57:00 user.domain.com krb5kdc[80](debug): routing msg not interesting
Feb 20 11:57:00 user.domain.com krb5kdc[80](info): got routing msg type 5(RTM_LOSING) v5
Feb 20 11:57:00 user.domain.com krb5kdc[80](info): got routing msg type 5(RTM_LOSING) v5
Feb 20 11:57:00 user.domain.com krb5kdc[80](debug): routing msg not interesting
Feb 20 11:57:00 user.domain.com krb5kdc[80](debug): routing msg not interesting
Users have not reported anomalies... so far...

Unable to capture messages from java.util.logging

I have a class called (Caller.java) which invokes a method called foo from another java class(Util.java) using reflection API.Now this method foo logs messages using Java's logger.My requirement is to call foo for 3 times from Caller and capture/redirect the log messages into 3 log files.
But only the first log file is capturing the log messages(from logger) and other two are not ?
Plz suggest if I am doing somethin wrong here ?
Caller.java
package project2;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.PrintStream;
import java.lang.reflect.Method;
public class Caller {
    public Caller() {
    public static void main(String[] args) throws Exception {
        Caller caller = new Caller();
        for (int i = 0 ;i<3 ;i++ ) {
            caller.createLogStream(i);
            System.setOut(caller.getPs());
            System.setErr(caller.getPs());
            /*****************Invoking Util.java*****************************/
            Class clas = Class.forName("project2.Util");
            Method m = clas.getMethod("foo",null);
            Object obj =clas.newInstance();
            m.invoke(obj,null);
    public void createLogStream(int i) throws FileNotFoundException {
        ps = new PrintStream(new File(System.getenv("HOME")+File.separator+"MyLog"+i+".log"));
    public void closeLogStream(){
        ps.close();
        ps = null;
    private PrintStream ps = null;
    public PrintStream getPs() {
        return ps;
} Util.java
package project2;
import java.util.logging.Logger;
public class Util {
    Logger logger = null;
    public Util() {
        logger = Logger.getLogger(this.getClass().getName());
    public void foo(){
        System.out.println("Hello out stream");
        System.err.println("Hello error stream");
        logger.info("This is an information");
        logger.warning("This is a warning message");
        logger.severe("This is fatal!! ");
}First Log file MyLog0.log:
Hello out stream
Hello error stream
Feb 16, 2009 7:55:55 PM project2.Util foo
INFO: This is an information
Feb 16, 2009 7:55:55 PM project2.Util foo
WARNING: This is a warning message
Feb 16, 2009 7:55:55 PM project2.Util foo
SEVERE: This is fatal!!
Feb 16, 2009 7:55:55 PM project2.Util foo
INFO: This is an information
Feb 16, 2009 7:55:55 PM project2.Util foo
WARNING: This is a warning message
Feb 16, 2009 7:55:55 PM project2.Util foo
SEVERE: This is fatal!!
Feb 16, 2009 7:55:55 PM project2.Util foo
INFO: This is an information
Feb 16, 2009 7:55:55 PM project2.Util foo
WARNING: This is a warning message
Feb 16, 2009 7:55:55 PM project2.Util foo
SEVERE: This is fatal!! Other 2 log files have only this much
Hello out stream
Hello error stream

A stale Connection Factory or Connection Handle may be used in SOA 11g
Regards,
Anuj

Mac starts up by itself at 1 am some nights... Can anyone help me stop this from happening based on reading my system log messages?

My Mac starts itself automatically around 1:00 am about ever other night. I don't want it to do that. I had a backup program installed once that was set to do the backup at that time, but I have long since uninstalled that program. Yet the computer still powers on automatically. I checked in the control panels and don't see it set to do that. I used the Console program to check my log, but I don't know how to read what it says. Here are the log messages from the last time the computer started itself automatically:
Sep 16 00:58:00 tio-E kernel[0]: System Sleep
Sep 16 00:58:00 tio-E kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Sep 16 00:58:00 tio-E kernel[0]: Started CPU 01
Sep 16 00:58:00 tio-E kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Sep 16 00:58:00 tio-E kernel[0]: System Wake
Sep 16 00:58:09 tio-E lookupd[213]: lookupd (version 369.8) starting - Mon Sep 16 00:58:09 2013
Sep 16 00:58:09 tio-E configd[37]: rtmsg: error writing to routing socket
Sep 16 00:58:26 tio-E /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Could not find "CPL" on any channel (directed scan)
Sep 16 00:58:26 tio-E /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Could not find "CPL" on channel(s) 6
Sep 16 00:58:37 tio-E /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Could not find "default" on any channel (directed scan)
Sep 16 00:58:37 tio-E /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Could not find "default" on channel(s) 6
Sep 16 00:58:40 tio-E kernel[0]: WLC_E_COUNTRY_CODE_CHANGED
Sep 16 00:58:40 tio-E kernel[0]: en1: 802.11d country code set to 'US'.
Sep 16 00:58:40 tio-E kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 5 6 7 8 9 10 11 1 2 3 4 5 6 7 36 40 44 48 52 56 60 64 149 153 157 161 165 40 48 56 64 153 161 36 44 52 60 149 157
Sep 16 00:58:41 tio-E kernel[0]: MAC AUTH succeeded
Sep 16 00:58:45 tio-E configd[37]: posting notification com.apple.system.config.network_change
Sep 16 00:58:45 tio-E lookupd[218]: lookupd (version 369.8) starting - Mon Sep 16 00:58:45 2013
Can anyone help me get to the root of this problem?

Hi Edwardo,
Perhaps there's remnants of that App you're not aware of... what was it?
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

[svn:cairngorm3:] 16810: Changed close event from flash.events.Event. CLOSE to mx.events.CloseEvent.CLOSE.

Revision: 16810
Revision: 16810
Author:   [email protected]
Date:     2010-07-03 03:32:49 -0700 (Sat, 03 Jul 2010)
Log Message:
Changed close event from flash.events.Event.CLOSE to mx.events.CloseEvent.CLOSE. See MXML examples in PopupTest.
Modified Paths:
    cairngorm3/trunk/libraries/PopupTest/src/samples/ModulePopups.mxml

Hmmm Strange!!!
Seems like a bug which requires target for parallel effect while hide only but does not set it.
For the time being you can remove the sequence effect as there is no othe effect other than parallel and use effect like
         <mx:Parallel id="fadeOutTw">
            <mx:Fade alphaFrom="1.0" alphaTo="0.0" duration="1000"/>
            <mx:WipeUp duration="1000" />
        </mx:Parallel>
or you can also set target explicitly like :
<mx:Sequence id="fadeOutTW" >
        <mx:Parallel target="{largeImgTW}">
            <mx:Fade alphaFrom="1.0" alphaTo="0.0" duration="1000"/>
            <mx:WipeUp duration="1000" />
        </mx:Parallel>
    </mx:Sequence>
I have tested on this code, and works fine. Hope this helps you
-Vikash

[svn:cairngorm3:] 16809: Changed close event from flash.events.Event. CLOSE to mx.events.CloseEvent.CLOSE.

Revision: 16809
Revision: 16809
Author:   [email protected]
Date:     2010-07-03 03:05:21 -0700 (Sat, 03 Jul 2010)
Log Message:
Changed close event from flash.events.Event.CLOSE to mx.events.CloseEvent.CLOSE. See MXML examples in PopupTest.
Modified Paths:
    cairngorm3/trunk/libraries/PopupTest/.actionScriptProperties

Hmmm Strange!!!
Seems like a bug which requires target for parallel effect while hide only but does not set it.
For the time being you can remove the sequence effect as there is no othe effect other than parallel and use effect like
         <mx:Parallel id="fadeOutTw">
            <mx:Fade alphaFrom="1.0" alphaTo="0.0" duration="1000"/>
            <mx:WipeUp duration="1000" />
        </mx:Parallel>
or you can also set target explicitly like :
<mx:Sequence id="fadeOutTW" >
        <mx:Parallel target="{largeImgTW}">
            <mx:Fade alphaFrom="1.0" alphaTo="0.0" duration="1000"/>
            <mx:WipeUp duration="1000" />
        </mx:Parallel>
    </mx:Sequence>
I have tested on this code, and works fine. Hope this helps you
-Vikash

Log Messages from Transaction Event Logger

Similar Messages

Maybe you are looking for