Logging into SPML service

Hi
I have installed the Netweaver2004s server on windows m/c.
I want to access the spml link.
http://ctsaw2k3sapep:50100:/spml/
Here i am pooped up with a user name and password.
What should i give here.
Please help
Regards
Manoj

Manoj,
this needs to be a user having a role with atleast UME.manage_All_Companies action assigned in the J2EE Engine.
Regards,
Jasper

Similar Messages

  • Can't log into Data Services

    Hello Gurus,
    I get this error message "Cannot initialize application. (BODI-1270039)" when I try to log into Data Services.
    I've tried reinstalling the Data Services (Client) but still the same problem.
    What's causing this issue?

    Hi l.v,
    In Windows, in the run option and put in the 'regredit' command and look under Hkey local and Hkey current user and make sure that you do not have BusinessObjects entry if you do then please delete them.
    It is assumed that you are only installing DS on this PC if this is not the case then you need to be extra careful and only remove the entries that belong to DS.
    Cheers
    Hai.

  • "Cannot log into Web service" error when tying to use Wifi to connect to Google Drive or Facebook

    We have a relatively new Canon Powershot s120.  Up until a few days ago, it worked just fine to connect to the Wifi and upload pictures to both Google Drive and Facebook.  Now, every time I try to connect, I get a message "Cannot log into Web service"
    I have already tried removing Google Drive from the Camera and re-adding it.  I went into the Canon Image Gateway website and disconnected and then reconnected the service.  That didn't do anything.
    Would really appreciate any tips anyone has.
    Thanks!

    Problem sorted - there is a new set of terms and conditions which came out on the 6th August.
    You have to log in under your current user name & password and agree to them and it works again. I spent a frustrating hour doiung this until I found out that this had happened!

  • Issue with logging into Presentation Services

    No luck fixing my issue using the search function.
    Administrator/Administrator or a blank password are not working. In NQSConfig.INI I set AUTHENTICATION_TYPE = BYPASS_NQS; but still cannot get into presentation services. Where do define/set the password here?
    I tried to uninstall/reinstall and get prompted for the oc4jadmin password which i also do not have.
    Edited by: cisGuy on Aug 16, 2010 10:12 AM

    Yes, i was then able to uninstall OBIEE and reinstall by resetting the oc4jadmin password. However upon installation and before reboot, i was able to log into Presentation Services as Administrator/Administrator. However once i rebooted and started all services, i can get to presentation services login screen but the same credentials give me an invalid user/pass error message.
    What is going on here? All services are running:
    Oracle Java Host
    Oracle Presentation Services
    Oracle BI Server

  • Connect to Bex query after logging into Web service

    Hello experts,
    After logging into the web service, I see connections for all HANA and BW infoProviders.
    If I click HANA OLAP connection, I see the "next" button. If I click connections to BW InfoProviders, the "Next" button is grayed out, I only have "OK" to click which takes me to the infoProvider.
    I know if I choose "Local System", I can log into BW and find BEx queries.
    Is this by design? Can't we get list of Bex queries under the connection we highlight somehow?
    Thanks.

    Hi Terry - I am not really following this workflow (could be just me)
    Did someone create OLAP connections to BW in the CMC?  Could you use the camera icon to share your screen shots?
    Tammy

  • How do I stay logged into my service provider home page.

    I have an ATT Account and use the classic home page with the Firefox Browser. I want to stay logged in for at least 2 weeks or more, but each time I enter the Firefox browser, it requires me to re-insert my full ID and Password. How do I change this so I will remain signed in for a period of at least two weeks before having to enter the email ID and password again. I've added an exception for this site in the Tools section and it still doesn't work.

    My sign in box no longer has the 2 week check box, how do I get it back?

  • After logging into Self Service unable to open forms clicking on links

    Hi,
    After successfully logging in using URL
    http://<hostname:port>/OA_HTML/AppsLocalLogin.jsp
    Clicking on System Administrator -> Concurrent -> Requests to launch it does nothing.
    Although http://<hostname:port>/dev60cgi/f60cgi i can opens form correctly.
    This was running successfully before. After the bounce it stopped working.
    I have checked $IAS_CONFIG_HOME/Apache/modplsql/cfg/wdbsvr.app file apps password is set correctly.
    Oracle Apps - 11.5.10.2 (Single Middle Tier) and Oracle Database 10.2.0.4 is a RAC ( 2 instances )
    Please advice.
    Regards,
    Nagendra Chillale

    Are you using JRE or JInitiator ? Pl enable the Java console to see if any additional error messages are captured in the console
    How To Enable The Java Console Jinitiator 1.1.8 and 1.3          (Doc ID 310961.1)
    How To View The Java Console And Enable Tracing For Sun JRE (Native Plug-in)          (Doc ID 452853.1)
    HTH
    Srini

  • Cannot log into applecare service source

    I have the Apple Care service training course which I began at the beginning of the year (registered 24/01/2012)
    Finally I am getting around to taking my exams in december.
    Previously I was able to login to the Service Source part of the website through GSX but that now constantly returns a 404 error.
    I am still able to access the Service Training part of the website. Why can I no longer access Service Source? I thought this was supposed to be available to me for the 12 month period of study?
    appologies if this is in the wrong part of the forum for this discussion. I have to say the whole process of self learning for  ACMT is not very smooth via apples websites!
    thanks
    Paul

    Thanks. This was the best place I could find to discuss it. Apple are very unhelpful with regard to this product/service. I have spent half a day on the phone to virtually every department I could think of and no one, absolutely no one even knows what I am talking about. Even the education support people. None of them know what Service Source is. There must be someone somewhere at Apple I could contact.
    So yes if anyone reading this has any clue for a contact please let me know.
    Thanks

  • Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.

    Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to. 
    I'm NOT in any way a Terminal Services expert and I need help trying to get an application program working in a multi-user environment.
    The issue is that the printer changes for every user that is logged in. The application needs to print NOT to the default printer, but to a "special" printer which is selected in the application... let's call it a label printer to simplify the explanation.
    You have your default regular printer, easy for the application to find that one, and then you have a special printer that labels get printed onto. The application needs to know what printer is the label printer. So we allow the user to select that in the
    application and the selection is stored in a config file in 
    C:\ProgramData\mfgr\prog\setting files
    I don't have access to the application so I can't change how this works.  
    In the "regular" world, selecting the label printer driver to use should be per machine, NOT per user. When a new user logs into a machine, the physical printer doesn't go "poof" and a new printer suddenly appear. Same printer for all
    users.
    Yet in terminal services, the physical machine is "merged" with the virtual machine on the server. And there can be many users logged in at the same time. So each users real machine (and real printer) is injected into the "fake" terminal
    services machine. The name of the printers is made unique for each user. So the printers DO go "poof" and change names depending on the user logged into terminal services.
    So user "A" logs in and sets up the application to print to "LabelPrinterForUserA" (or whatever the name of the printer happens to be), that setting is stored in the ProgramData subfolder, and all is well. Later, user "B" logs
    in, and when they print, the application tries to print to "LabelPrinterForUserA" which doesn't exist for user B or is only accessible by user A. If user B re-configures, that breaks it for user A. 
    SOLUTION 1: The way that /should/ work (in my mind) is that you define one "generic" printer in Terminal Services... call it "Virtual Label printer" and when the user wants to print to it, the print job gets re-directed back to whatever
    physical printer is actually connected to their local workstation. There is a map of virtual printer to actual printer depending on the current user. The application is told once to print to "Virtual Label Printer" for all users.
    SOLUTION 2: Or... there should be some way to make the ProgramData sub folders separate per user. E.g. when user "A" tries to access:
    C:\ProgramData\mfgr\prog\setting files
    they actually get 
    C:\UserData\UserA\AppData\mfgr\prog\setting files
    and user "B" gets
    C:\UserData\UserB\AppData\mfgr\prog\setting files
    So the question I have is: Does either of those solutions exist hidden somewhere in the setup of terminal server? Or is there another way around this issue that I don't know?

    I don't really have a "for sure" answer to this, but because people here can't seem to deal with a question that hasn't been answered I'll provide the best answer I did receive from ServerFault.com user Nathan:
    I can feel your pain with using old software on terminal servers ...the solution I've come up with definitely won't scale as it requires some manual configuration, but I've gotten this method to work with our label printers (which require to be
    printed to an LPT port...yep, that old).
    Share your USB-connected printers to the network on each machine. Then, have the user log in on aunique session for each of them
    (a TS account cannot be shared among computers for this to work) and install a network printer pointing to the USB one they shared. Try to use a DNS name to account for possible DHCP movements.
    After, it should work. Each user can do this since display names can be identical as long as the ports are different (which they are).
    This was clarified by the following series of comments:
    I think you are on to something here, and I originally advised the admin to do this. The problem he ran into is that it setup the printer names in the TS as "printer on usersworkstation"
    and he could not rename it except to change the "printer" to whatever. E.g. the "on userworkstation" remained. I believe there is another way of installing the printer which avoids this, but I can't find it. Ages ago, one used to do NET
    USE LPT2 \\computer\printer password /USER:domain\user /PERSISTENT:YES and then tell the driver to print to LPT2 –  James
    Newton Mar
    17 at 16:21   
    @JamesNewton That's actually the exact method we used. The way around the "network printer" part is to install it as local printer and map it to a TCP/IP port that way. –  Nathan
    C Mar
    17 at 16:28
    You mean in the case where the printers are TCP/IP connected and not local USB / LPT to the users workstation? That makes sense. Wonder if this will work for USB connected printers... –  James
    NewtonMar
    17 at 16:35   
    @JamesNewton You'd share the local printer on the client's PC then on the server connect via TCP/IP to it. You'd need static addresses or use DNS names if DHCP, though. –  Nathan
    C Mar
    17 at 16:51
    Ah. Yes. I see. Looks like the LPT thing should work even with a USB connected printer:superuser.com/questions/182655/… –  James
    Newton Mar
    17 at 17:09   

  • Please tell me why it takes so long to log into a site protected by 'Rapport' security software since the upgrade to 17.0.1. Also locks firefox temporarily

    When logging into:
    https://service.oneaccount.com/onlineV2/OSV2?event=login&pt=1
    Rapport seems to hang the whole browser. This has only been a problem since you upgraded me to 17.0.1. Have just tried the same operation with Rapport running on IE8 and no problem, from hitting go to being in - 12 seconds and use of the browser. When can we expect a fix?

    Hi,
    Please see http://www.trusteer.com/support/ for updating the current installation, and reporting issues.
    ''fixed the broken hyperlink - Ed''

  • Cannot log into CMS and all services fail to load on installation.

    A trial version of Crystal Server XI r2 was installed due to problems with the license key for our purchased version of XI.  The r2 has since expired and I have uninstalled it.  I have now tried to install XI several times, but I am having a problem with the installation where it is Starting Services.  I get errors for each server Error 1920 Service Destination and server failed to start.  Please can you advise why this is occurring and what I can do to fix it?
    I keep getting the log in for the CMS, but no matter what I enter it fails.  Possibly I have selected something wrong in the installation.  I do not believe we had to log into the CMS previously.
    It comes up with
    System: CrystalReports (no other options) User Name: Administrator
    Password:
    Authentication:  Enterprise (other options LDAP, Windows NT, Windows AD - all these come up with error that there is no plug-in).  I have entered the server password which failed, tried it blank which failed.  I do not know what is required here.
    I have tried all our passwords, but no users or passwords work.  I have tried selecting different options, but have mostly tried New with the Create new or use existing, java and iis both selected as default, SQL Server and entered sa + password,
    I think probably an old version of the CMS exists from the original installation, but I have tried complete uninstall. 
    In the event viewer there is error:
    Event Type:     Error
    Event Source:     Application Error
    Event Category:     (100)
    Event ID:     1000
    Date:          18/08/2010
    Time:          14:16:24
    User:          N/A
    Computer:     CRYSTALREPORTS
    Description:
    Faulting application cacheserver.exe, version 11.0.0.1282, faulting module unknown, version 0.0.0.0, fault address 0x7ff2fbfc.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 41 70 70 6c 69 63 61 74   Applicat
    0008: 69 6f 6e 20 46 61 69 6c   ion Fail
    0010: 75 72 65 20 20 63 61 63   ure  cac
    0018: 68 65 73 65 72 76 65 72   heserver
    0020: 2e 65 78 65 20 31 31 2e   .exe 11.
    0028: 30 2e 30 2e 31 32 38 32   0.0.1282
    0030: 20 69 6e 20 75 6e 6b 6e    in unkn
    0038: 6f 77 6e 20 30 2e 30 2e   own 0.0.
    0040: 30 2e 30 20 61 74 20 6f   0.0 at o
    0048: 66 66 73 65 74 20 37 66   ffset 7f
    0050: 66 32 66 62 66 63         f2fbfc 
    Please can someone help?  I am almost suicidal!
    Georgie

    Moved to BOE forums where CRS is supported.

  • My daughter is missing and has her iPhone 4S with her. When I log into iCloud it says online, location services off. Does that mean there is no way for me to track the phone?

    My daughter has been missing for a week and has a serious medical condition. She has an iPhone 4S and when I log into find my iPhone it says online , location services off. Does that mean there is no way to track the phone?  Please  I'm willing to try anything to get my baby home. Thanks.

    Without location services, there's no way the device can be tracked.  It's location services that provide the device's location to any apps that need that info, including the Find My iPhone service.  Sorry.

  • For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent  problems when logging into some  websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop compuHelp

    For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent  problems when logging into some  websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop computer. The wifi unit is  a iinet BOB 2 unit. The other computer works completely fine. The only problem is with this apple iPad? I have rebooted iPad and rebooted BOB 2 wifi unit but this has made on difference to the problem?
    Can anyone suggest any HELP
    Thank You

    For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent  problems when logging into some  websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop computer. The wifi unit is  a iinet BOB 2 unit. The other computer works completely fine. The only problem is with this apple iPad? I have rebooted iPad and rebooted BOB 2 wifi unit but this has made on difference to the problem?
    Can anyone suggest any HELP
    Thank You

  • TS4425 I have upgraded to 5.3 and I am still getting this message.  I have logged into iCloud to see if there was a new Terms of Service agreement and didn't see anything.  Any ideas?

    I have upgraded to 5.3 and I am still getting this message.  I have logged into iCloud to see if there was a new Terms of Service agreement and didn't see anything.  Any ideas?

    Same here. The login works, but the Stream - according to the ATV - says there are "0" photos. Which is bogus.

  • Error while trying to log  into Essabase integration services console

    Hi all,
    I've installed successfully Essabase integration services in standalone mode,
    The EAS works correcty,
    now every time I try to log into the Essabase integration services console the OLAP METADATA CATALOG combobox is empty and I got an error
    "error: there is currently no connection between the console and integration server. Ensure that the server is running and try reconnecting.
    Any suggestion?
    Thanks in advance

    Hi All,
    Even iam getting the same error when loggin into the EIS console. before getting into the console i started the EI Server.
    when entering the EIS console this above error is thrown, i am new to the EIS, and OLAP and meta ouline configuration, some DSN creation little confused with the configuration.
    i have ORacle 9i as the DB.
    Any help will be really appreciated.
    Thanks

Maybe you are looking for