Logic and FLAC

I bought Logic Studio 8 two weeks ago(doh!), and I've been trying to learn it. I must say, it is quite logic(!) and very easy to use, despite the fact that it is also very advanced and you can do so much stuff in it. Well, anyway, today I was going to import a FLAC file, and I realised that you can't! Does anybody know the reason for this? FLAC is free to use, so I don't understand how Apple could lose money on supporting it. I checked iTunes store, and it isn't supported there either(that's okay for me though, as I'm more of a vinyl guy).
And also: is FLAC supported in Logic 9? I can't wait to upgrade it!

UnFLAC your file back to a regular, uncompressed audio file before using it in any DAW.
Really, you shouldn't be using compressed files formats for performance reasons.

Similar Messages

Logical AND in MDX Reporting Services Parameter

Hi, I would like to implement logical AND on a cube parameter. I have seen examples of hard-coded logical AND in MDX.
(http://salvoz.com/blog/2013/12/24/mdx-implementing-logical-and-on-members-of-the-same-hierarchy/)
But I'm not sure how to apply this to a parameter's MDX dataset.
Here is an example of the automatically generated MDX which uses logical OR:
This is the drop down parameter:
WITH MEMBER [Measures].[ParameterCaption] AS [Department].[Department].CURRENTMEMBER.MEMBER_CAPTION MEMBER
[Measures].[ParameterValue] AS
[Department].[Department].CURRENTMEMBER.UNIQUENAME MEMBER [Measures].[ParameterLevel] AS
[Department].[Department].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue],
[Measures].[ParameterLevel]} ON COLUMNS
, [Department].[Department].ALLMEMBERS ON ROWS
FROM [MyCube]
And the demo report dataset is:
SELECT NON EMPTY { [Measures].[CompanyTbl Count] } ON COLUMNS,
NON EMPTY { ([Product Level No].[Product Level No].[Product Level No].ALLMEMBERS ) }
DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM
( SELECT ( STRTOSET(@DepartmentDepartment, CONSTRAINED) )
ON COLUMNS FROM [MyCube]) WHERE
( IIF( STRTOSET(@DepartmentDepartment, CONSTRAINED).Count = 1,
STRTOSET(@DepartmentDepartment, CONSTRAINED), [Department].[Department].currentmember ) )
CELL PROPERTIES VALUE,
BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING,
FONT_NAME, FONT_SIZE, FONT_FLAGS

Hi,
I can see there just one parameter @Department@Department in your script. But if you had two parameters that should return resultset affected by two parameters. You can do it as either select from subselect from subselect.
Example 1
SELECT
{x} ON COLUMNS,
{ROWS_SET} ON ROWS
FROM
(SELECT StrToSet(@Param1) ON COLUMNS FROM
(SELECT StrToSet(@Param2) ON COLUMNS FROM
[CUBE_NAME]
Or crossjoin between 2 parameters
SELECT
{x} ON COLUMNS,
{ROWS_SET} ON ROWS
FROM
(SELECT StrToSet(@Param1)*StrToSet(@Param2) ON COLUMNS FROM
[CUBE_NAME]
Jiri
Jiri Neoral

What is a Logical and Physical file path in sap?

what is a Logical and Physical file path in sap?

Hi,
Physical file is what you see from the OS level.
Logical file is what ABAP code can call certain functions to read/write.
Transaction FILE would link them together. Typically the logical path ends with "<FILENAME>", and the logical file refers to the logical path.
To extract the physical path from the logical path name
DATA: lf_mandt TYPE sy-mandt,
        lf_opsys TYPE sy-opsys.
lf_mandt = sy-mandt.
lf_opsys = sy-opsys.
To extract the physical path from the logical path name
CALL FUNCTION 'FILE_GET_NAME'
    EXPORTING
      client           = lf_mandt
      logical_filename = p_unix
      operating_system = lf_opsys
    IMPORTING
      file_name        = gwa_input
    EXCEPTIONS
      file_not_found   = 1
      OTHERS           = 2.
IF sy-subrc EQ 0.
Concatenating the physical path and the input unix file name
    CONCATENATE gwa_input p_file INTO gf_file .
ENDIF.
Reward if helpful.
Regards,
Ramya

Logical AND not working in the forum search box

Logical AND of search terms does not seem to be working in the MSDN forum search box. Example: I go to the Project Customization and Program forum and type the word
subproject
in the search box. I get a lot of hits. So now I try to reduce the number of hits by typing
subproject AND read
Surprisingly, I now get MORE hits than before. The same thing happens if I enter
subproject & read
Do the MSDN forums not support the standard logical AND combinations of search terms? If they do support these combinations, what is the syntax?
Jim
...Jim Black

Cheers, you're welcome.
There's a thread going in the Suggestions forum with plenty more requests for updates to the search tool. You may want to add your voice there too:
http://social.technet.microsoft.com/Forums/en-US/9cf8ad4b-5111-4f84-9809-99cd8f1b7152/make-the-forum-search-tool-useful?forum=suggest
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

Logical and physical clear in ASO

Hi There,
I found one statement for Logical and physical clear in essbase dbag
The process for logically clearing data completes in a length of time that is proportional to
the size of the data being cleared.
The process for physically clearing data completes in a length of time proportional to the
size of the input data, not to the size of the data being cleared
What does size of the input data actually means? How it is different from data being cleared.
Thanks.

What is interesting with these statements is based on them, you would think a logical clear would be slower than a physical clear. In reality, it is vastly faster. I took a 30 minute physical clear down to about 40 seconds with a logical clear. Logical clers create offsetting entries from the main cube in a slice to produce a result whila a physical clear deletes the actual data. The one thing about logical clears is rather than have #missing for cleared intersections you get zeros

Logical and physical file paths

Hi,
can anyone elobrate me on what are logical and physical file
paths ?

hi,
Follow this link
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3deb358411d1829f0000e829fbfe/frameset.htm
File format determination (Required / optional fields and field checks).
Logical File Path configuration through transaction 'FILE'. A new physical file path should be created on operating system level or an existing one can be used if agreed. The Basis team member should create a new file path at operating system level, if required.
Hope this helps, Do reward.

Logical AND in Java Regular Expressions

I'm trying to implement logical AND using Java Regular Expressions.
I couldn't figure out how to do it after reading Java docs and textbooks. I can do something like "abc.*def", which means that I'm looking for strings which have "abc", then anything, then "def", but it is not "pure" logical AND - I will not find "def.*abc" this way.
Any ideas, how to do it ?
Baken

First off, looks like you're really talking about an "OR", not an "AND" - you want it to match abc.*def OR def.*abc right? If you tried to match abc.*def AND def.*abc nothing would ever match that, as no string can begin with both "abc" and "def", just like no numeric value can be both 2 and 5.
Anyway, maybe regex isn't the right tool for this job. Can you not simply programmatically match it yourself using String methods? You want it to match if the string "starts with" abc and "ends with" def, or vice-versa. Just write some simple code.

BEx Formula Use of 'Logical And' and Calculation for Gross Margin

HI Bex gurus.
Having an odd time with what should be a simple formula to handle the display of gross margin (GM). The goal here is to display GM% properly and the requirement is as follows
If GM <= 0 then 0.0
Else
If GM > 0 and Sell > 0 then ( ( sell - cost /sell ) * 100 )
Else
If GM >0 and Sell = 0 then 100
I am familiar with bex formulas and have referenced the help docs on booleans here -
Boolean Operators - SAP Business Explorer - SAP Library
But what is odd is that if I use a calculation or a CFK in the IF, THEN with a LOGICAL AND, the formula does not report correctly
If I put in a static value, like 77, the expected logic is followed. I have tried making sure have extra parentheses and changing the order of the statement, to no avail! I could use some extra brains on this puzzling matter, so you help is greatly appreciated and will award points!
Thanks
lee lewis
Here are the formulas in text and below screen shots. Wish could copy and past formulas to and from editor!
GM%77
( ( ( 'Order GM' >0 ) AND ( Order Sell > 0 ) ) == 1) * 77 + ( ( ( 'Order GM'> 0 ) AND ( Order Sell == 0 ) ) == 1) * 100 + ('Order GM' <= 0) *0.0
GM%
( ( ( 'Order GM' >0 ) AND ( Order Sell > 0 ) ) == 1) * 'REF GM%' + ( ( ( 'Order GM' > 0 ) AND ( Order Sell == 0 ) ) == 1) * 100 + ('Order GM' <= 0) *0.0
'REF GM%
(order sell - order cost /order sell ) * 100 )
GM%77
GM%

Shouldn't you change on of the brackets in your REF GM% ?
'REF GM%
(order sell - order cost /order sell ) * 100 )
I would put that as
'REF GM%
(order sell - order cost) /order sell * 100 )
Not sure what you mean with those red arrows... but in both cases you would be dividing by 0 (order sell = 0).

Ivé just recived logic and I wonder: can I use the registration for logic on all my computers or is it limited to just one?

Ivé just recived logic and I wonder: can I use the registration for logic on all my computers or is it limited to just one?

You can install it on 2 Apple computers

MP3 and Flac player

Hi,
I am looking for a good audio player with the option to play MP3 and Flac files.
I have tried FLAC player but its capability for organizing and editing files according to composers and musical works is very limited.
Any help will be appreciated.
Thanks,
Amnon

Flash: I use Adobe 64 bit when absolutely necessary, behind NoScript and FlashBlock (Firefox addons) and sandfox
Audio Player: mplayer (with smplayer frontend), and also VLC
File Archiving: Personally I use a chooser script from within my file manager for most archiving. That way I can do it fast and can customize the script with any archive formats and options I want. Likewise, I use an xtract script associated in my file manager so I can click on any archive and it is instantly extracted into a subfolder - no interaction. Also, if you want 7-Zip support it's p7zip, although I think xz is a more linux friendly and capable implementation of lzma2.
Audio Ripper: Asunder is pretty good, although I'm still shopping.
Video Ripper: I use mplayer, usually through ripdvd
ISO Burner: I wrote a custom script for burning (which I haven't shared) that does it with CLI commands, which I found to be the easiest and most reliable method. Graveman and Brasero are also decent.
PDF Viewer: Evince
You might also check out the list of apps I used to replace KDE when I dropped it.
Welcome to Arch.
Last edited by IgnorantGuru (2010-06-22 02:27:40)

Noob needs help with Logic and Motu live setup.

Hello everyone,
I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
Here's the scenario:
I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
Here's the confusion:
There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
Here's the goal:
All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
I want to be able to EQ and balance the ensemble via Logic.
Here's another question:
How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
Thanks in advance,
Chris

You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

How do I prevent itunes from moving my music from its original place ie folders in an external drive when I play music from itunes. I have all my music in artist folders and separated by MPG3/MPG4 and FLAC folder within the artist folder.

How do I prevent itunes from moving my music from its original place ie folders in an external drive when I play music from itunes. I have all my music in artist folders and separated by MPG3/MPG4 and FLAC folders within the artist folder and itunes moves the track/s whenever i try and load selected music to my ipod/iphone. I've tried to find some sort of preference to prevent this, but no joy? What am I missing?

Try opening iTunes preferences. Then click on advanced tab. Then uncheck "Copy files to iTunes media folder when adding to library." By default, iTunes copies music to its own media folder when you use iTunes to play the music.

Difference between logical and virtual terms

Hello,
This is not purely oracle question; but in documentation so many times we find 2 terms:
A. Logical
B.Virtual.
So what is the principle difference between logical and virtual? As I know physical is that which I can see and touch; while logical/virtual is that is imaginary. We say tablespace is logical not virtual; while Java Virtual Machine; not Java Logical Machine. So I want to know; what is the principle difference; why two words for an imaginary thing. Before posting question; I searched in google as “Difference between virtual and logical” but I couldn’t found the answer.
Please quote your comments.
Thanks & Kind Regards
Girish Sharma

Girish,
I wont say that I am correcting you as this is like that half glass full/empty thing.May be what I see is half empty , you would see the same as half full.
Well now coming to the explanation.I am saying honestly , I got more confused after reading your definitions.What do you mean by saing that tablespace is not virtual.I see it as purely virtual.We don't say it as virtual tablespace or logical tablespace but it is actualy logical/virtual, having no existance but just the definition right?
How can you say that the size of virtual is larger than logcial?The size of tablespace is actualy the sum total of size of datafiles.So it actualy becomes very larger right?Much larger than JVM which is of few megs only.
The point 3 totally knocked me out.I have no idea what you said.
Ok I tell you this.Just remember the definition that Hans gave already.If you ask me than its the best definition that we can have. Just remember this and if some one asks you more further than give them your point 3 definition and tell them understand this ;-).Please don'tmind I am just kidding. Its just semantics.Don't get lost into it.You will find many people using both the terms interchangibly. So its ok.I shall stick with Hans's defintion,simple and concise.There are lot more other topics to dig upon in oracle.I can mail you lots of them.Spend time on those.Don't think that I am demotivating you.I understand you asked only because you have a doubt.But we got a good resolution of it and beyond that, its not of much use to dig it atleast not in the technial terms.
Cheers
Aman....
PS:Are you on oraclecommunity.net?

I am trying to stop encryption in fire vault, but I keep getting the message, The target disk isn't eligible for reversion because it wasn't created by conversion or it is not part of a simple setup of exactly one logical and one physical volume.¨

I am trying to cease encryption in fire vault, Mac os x lion 10.7 4
I keep getting the message,
¨The target disk isn’t eligible for reversion because it wasn’t created by conversion or it is not part of a simple setup of exactly one logical and one physical volume.¨
Please can someone advise the way to disable?
Thank you.

Are you using Boot Camp? See this discussion at MacRumors.
Clinton

Diff between logical and physical file path

Hi ,
Could you please explain difference between logical and physical file path's and their importance in ABAP.
Thanks and regards,
shyla

Hi
The function module FILE_GET_NAME convert a logical path into its corresponding physical path.
The advantage of using logical pathes within your applications is obivous:
If you need to change the physical path you just adjust it within transaction FILE yet no changes are required to your application.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/25/ab3a57df3b11d189fc0000e829fbbd/frameset.htm
The file names that you use in ABAP statements for processing files are physical names. This means that they must be syntactically correct filenames for the operating system under which your R/3 System is running. Once you have created a file from an ABAP program with a particular name and path, you can find the same file using the same name and path at operating system level.
Since the naming conventions for files and paths differ from operating system to operating system, ABAP programs are only portable from one operating system to another if you use the tools described below.
To make programs portable, the R/3 System has a concept of logical filenames and paths. These are linked to physical files and paths. The links are created in special tables, which you can maintain according to your own requirements. In an ABAP program, you can then use the function module FILE_GET_NAME to generate a physical filename from a logical one.
Maintaining platform-independent filenames is part of Customizing. For a full description, choose Tools ® Business Engineer ® Customizing, followed by
Implement. projects ® SAP Reference IMG. On the next screen, choose Basis Components System Administration ® Platform-independent File Names.
For a more detailed description of the function module FILE_GET_NAME, enter its name on the initial screen of the Function Builder and choose Goto Documentation. On the next screen, choose Function module doc.
Another way of maintaining platform-independent filenames is to use the Transaction FILE. The following sections provide an overview of the transaction.
To create a logical filename, choose Logical filename definition, client-independent from the Navigation group box in Transaction FILE, then choose New entries. You define logical filenames
You can either define a logical filename and link it to a logical path (as displayed here), or you can enter the full physical filename in the Physical file field. In the latter case, the logical filename is only valid for one operating system. The rules for entering the complete physical filename are the same as for the definition of the physical path for the logical file. To display further information and a list of reserved words, choose Help.
If you link a logical path to a logical file, the logical file is valid for all syntax groups that have been maintained for that logical path. The filename specified under Physical file replaces the reserved word in the physical paths that are assigned to the logical path. To make the name independent of the operating system, use names that begin with a letter, contain up to 8 letters, and do not contain special characters.
Save your changes.

Logic and FLAC

Similar Messages

Maybe you are looking for