Logic dosen´t send out my prg. ch numbers on start up?

Hi List
I have a couple of external synths (Moog Voyager, Nordlead 4, Dave Smiths Tetra.....) In my customized template I have prg change numbers to be sent out on start up. But it seems like I need to manually change the value in the track parameters. Another funny thing...I can´t send program change into logic from my external synths.
Anyone heard about this?
Best
Tomas Bodin
Maverick, Logic 10.0.6

As an example, (midi ch 1, Nordlead 4) I switch sound via the track parameters in Logic. I decide to change it to prg 73. So far so good because when I change prg from Logic, the sound will change accordingly in the Nordlead. Now I change the program once more , but this time I´ll perform the change from the Nordlead. Lets´say prg 74 (I have the nord prg change in send & recieve) Of course the sound will change soundwise.... but in Logic (on the same midi channel) nothing will happen. In Logic it still says prg 73. But I´m listening to prg 74. Now here comes the funny part.. When I press record in Logic the track will switch to prg 74. So in my world it seems like there is a problem with midi thru somehow. Once you direct the track (in this case)  ch 1, Logic will update the actual status.
Thank you for your patience!
Ideas?
Best
tomas

Similar Messages

  • I can record midi data from my Mason & Hamlin Piano Disc Pro Record through my MOTU Traveller into Logic but Logic won't send midi data out to the MOTU Traveller to the Piano Disc player

    Hello All,
    I can record midi data from my Mason & Hamlin Piano Disc Pro Record through my MOTU Traveller into Logic Pro 9.1.8  but Logic won't send the midi data back out to the MOTU Traveller and thus to the Piano Disc player. I got it to playback one time but have no idea how and when it did it was looping or something because the velocity was way high coming back in and the damper pedal was slamming down. When I play a key on the piano the midi "in" light on the Traveller lights up. When I play the track back on my computer no lights blink on the Traveller and when I did the apple midi studio test in utilities when I play a key I get the confirmation signal noise and the Traveller blinks when I click on the down arrow of the Traveller in the Apple midi studio test the midi out light on the traveller never lights and the signal light on the piano does not blink either. No outbound signal at all...
    I have messed with every possible parameter I can find and and have had help from one of Piano Disc's premier editors but no luck. The piano was prepped for me on Logic so it would work with my studio.  I'm positive it's my fault and I'm overlooking something really simple and stupid but what!??!
    Somebody please help.  Thank you all in advance for ANY ideas you might have!

    Blues Piano,
    I'm not sure if this will be a help or not.  I'm so Logic Pro wet behind the ears that I make newbies look experienced.  However, I'm not expecting many on the Apple support forums have a PianoDisc system, much less one with the new optical record strip.  While I don't have any record strip on my PianoDisc, I do have a PianoDisc iQ that's only a month old.  I've been playing converted paper scrolls from hundred year old player pianos through it via the MIDI in port of the PianoDisc CPU.  I've found I have to open the MIDI file in Logic Pro (10.0.4) then go to <Track><New External MIDI Track> then copy the existing track to that new external track.  Only then can I see in the Track inspector (defaults left side of screen with the Icon for the instrument) the "Port" parameter.  Then I can select my external MIDI device in that Port selector. 
    I've also encountered problems with the PianoDisc not using enough force on the notes or using too much force.  To get around this problem, until I understand Logic better, I've been setting minimum and maximum volicities.  To do that I right click on the track and select "Select All."  Then I right click again and select "MIDI" then "MIDI Transform"  then "Velocity Limiter."  In the resulting pop up window in the center is a drop down and you can play with the velocity from "MIN" to "MAX" along with "ADD" "SUBTRACT" etc. 
    I hope this helps.  I envy you your Mason & Hamlin.  If you need more help on this just email me at pfleischmann at mac dot com.

  • Using a group list in email and automatically sending out an email

    I have set up a group list in address book.  Each contact has 2-3 emails.  I am using Mail.  Currently when I have to send an email out to the group I have to select the group in address book, then choose "select all".  Select all only chooses 1 email per contact.  I then have to manually choose the 2nd and 3rd emails for each contact.  Is there any way I can use the group that I have created without having to go through all of that in order to send an email to my distirbution list?
    I blind cc'd my self on the original email I sent to the group and was using that one to "forward" but the problem I encountered was some people added, changed or fixed a correction in their email the forward did not reflect the change in the email.  I fixed the email in address book but it was not reflected in the original email--which I knew would happen.  Hopefully there is a better way to accomplish this!
    I also have to send out the same weekly reminder to this group--is there any way I cen set email to do this automatically?
    Thanks!

    Wow! This is what I've been looking for. I can't believe more people on this forum aren't complaining about not being able to use a Song List.
    Have you used this app?
    Is it stable?
    Can it be used with Logic LE, Garage Band etc.
    Thank you so much for this info.

  • DIO Pass or Fail Tests: LabVIEW would have to determine the expected result or results (1 or 2 of a possible 25) based on the output pattern send out (1 of 65K).

    I am trying to come up with a plan to write a LabVIEW VI to do the following test. Can you give me a few ideas how to do this in LabVIEW. I am a new to LabView. I think I how to read and write I/O ports and do comparisons. I need a little guidance on the error checking. In simple terms the test will go like this:
    I have 16 digital inputs and 16 outputs.
    The 16 outputs are turned on in a specific pattern (i.e. 1001000101011101) and then the 16 inputs (i.e. 1000101111111111) are read in after a time delay. The inputs are checked to see if they match the expected results. If they do it's a pass if not it's a f
    ailure. This seems pretty straightforward. And I think I have an idea how to do it. Here's the problem. The inputs are changed sequentially so that all possible combinations are tried. The test needs to determine if the resulting input pattern is correct based on the outputs that were sent out. 16 outputs give 65K possible tests. For each tests there would be 1 or 2 possible results with a total of 25 results for the entire 65K possible tests. LabVIEW would have to determine the expected result or results (1 or 2 of the 25) based on the output pattern send out (1 of 65K). Then it would have to compare the actual input pattern received to see if it's a pass or fail?
    Any ideas how I can approach this?

    The 16 outputs are simulating inputs to the device under test, (simulating remote switches and contacts). The object of the test is to test every possible combination to ensure that nothing unexpected happens at the output. The device under test is a logic motor control system and we want to make sure (among other things) that we don’t start or stop the motor when its not suppose to. How can only two tests do that?
    I think you are describing how to create an array with the results. But I still don’t know how to determine what the result should be and if it is correct.
    I’ve identified 25 possible valid states the motor controller can be in.
    I’ve also identified the correct outputs that determine each of the 25 states.
    I’ve also
    identified the possible valid states you can go to from each (previous) state, You can only get to a valid new state from a previous state if the right combination of inputs is applied (we hope).
    If you know what state you are in when start and you know the valid states you can go to and the inputs required to get there, you should be able test the system against that. You verify this by checking the outputs against what they should be. With 65K possible inputs combination, checking them all manually would be quite is a task. Putting this into LabView is my task.

  • My Account keeps sending out spam

    I, too, have reached the end of my tether with BT.
    Almost every month, around the 28th/29th, my BT account sends out hundreds of emails to recipients whose details are stored on a very old contacts list. The messages contain links like this: http://directlenderpaydayloans.com/hvrykj/wpxajnsjhzetukayxqjilmvsqdvvulbynpgyicsc
    Many of the recipients are important professional contacts and I am finding this incredibly frustrating - and humiliating, as the logical assumption is that I have somehow triggered these emails. The fact is I rarely visit BT and am desperately trying to wind down my BT email account.
    I now want to close the account and remove any trace of that old contacts list that must be lurking somewhere within BT's systems.
    Has anyone else experienced this appalling phenomenon?
    John

    Welcome to the forum. It sounds as though your email account was hacked at some time. If the hackers harvested your contacts list, they now have the details and even closing the account won't prevent them continuing to use the addresses or making it appear that their messages are still being sent from the account. If the messages are being sent by or on behalf of a genuine company it might be possible to take action against them to put a stop to the use of information obtained illegally.
    You wouldn't be alone in having your BT Yahoo! account hacked - Yahoo!'s vulnerability is a major reason why BT are in the process of migrating customers to a new BT Mail service (a process which alas is not without a fresh batch of problems for some).
    At the risk of appearing to be wise after the event, it's never a good idea to keep personal information in the cloud in my view. Ask the celebs who are finding their intimate photos scattered on the internet.
    You can click the white star next to this message if you think it was helpful.

  • 3 GWIA's and sending out mail ...

    Hi,
    Have 2 GWIAs, (InternalGWIA and ExternalGWIA). I have to create another one to send mail out to another system (External2GWIA).
    I can't send out to External2GWIA. My logs for it show nothing. I checked ExternalGWIA and there is a rejection in that log. BUT, if I send the message out by concatinating the GWIA name in from of the email (e.g. ... gwdomain.gwianame:[email protected]), it will push it OK.
    My route.cfg's are defined OK.
    My "Internet Agent for Outbound SMTP/MIME Messages" entry in the Tools > GroupWise System Operations > Internet Addressing is set to ExternalGWIA. If I chance it to External2GWIA I can send out OK ... but then mail going out through ExternalGWIA attempts to go through External2GWIA.
    Hope this makes sense.
    I need 2 External GWIA's cause they need to activate FlatForwarding. I don't know what effect this would have on my original External GWIA.
    Shouldn't this work ?

    We just decided to use that existing GWIA and implement flatforwarding in it.
    d
    >>> Andy Konecny<[email protected]> 3/3/2013 9:24 pm >>>
    In article <[email protected]>, David Schryer wrote:
    > If I send the message out by concatinating the GWIA name in from of
    > the email (e.g. ... gwdomain.gwianame:[email protected]), it will push
    > it OK.
    That is working as designed, and other than that, you haven't specified
    how you are expecting traffic to use that other domain.
    Generally traffic from a PO is all to one GWIA, but there are methods
    to auto concatenate that might be useful such as the method we used
    before the 'Internet addressing' function was built in (I think it had
    enough rules logic to help).
    Andy Konecny
    Knowledge Partner (voluntary SysOp)
    KonecnyConsulting.ca in Toronto
    Andy's Profile: http://forums.novell.com/member.php?userid=75037

  • SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

    I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
    of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
    out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
    I need help to resolve this issue or at least the cause of the problem.
    Any help is greatly appreciated.

         
    Try below:
    http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
    Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly 
    2) Test the connectivity with the SMTP server.
    In order to do that follow these steps:
      Open  cmd
      telnet <SMTP server name> 25 ( We connect smtp server to the port 25)  
                     you should see a response  like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
                     Beware that different servers will come up with different settings but you will get something
                     If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or 
                     the smtp server is not responding.
      For testing response from your server
                       For testing response say ehlo to it.
                            Type :
                                        ehlo <servername>
                            output:
                                        250 <servername> Hello [IP Address]
      Now a test mail can be sent from that SharePoint server. 
                          Now we need to enter the From address of the mail.
                          Type :
                           mail from: [email protected]
                           output:
                           250 2.1.0 [email protected]….Sender OK
     It's time to enter the recepient email address.
    Type : rcpt to: [email protected]
    output:
    250 2.1.5 [email protected]
     Now we are left with the data of the email. i.e. subject and body.
    Type : data
    output:
    354 Start mail input; end with <CRLF>.<CRLF>
    Type:
    subject: this is a test mail
    Hi
    This is test mail body
    I am testing SMTP server.
    Hit Enter, then . and then Enter.
    output:
    250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
    Type: quit
    output:
    221 2.0.0 <servername> Service closing transmission channe
    3)  Check alerts are enabled for your web application
          verify if the windows timer service is running or not.
          Run this stsadm command to check that
          Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
         This should return <Property Exist="Yes" Value="yes" />
         If you don’t get this, Enable alerts by:
         stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
          If its already enabled, try turn off and turn on it back.
    4)  Check the Timer job and Properties
           Go to
           MOSS 2007:  Central Administration > Operations > Timer Job Definitions (under Global Configuration)
           In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions 
           Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
                       job-immediate-alerts
                       job-daily-alerts 
                       job-weekly-alerts
           stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
           The expected output is:
           <Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.  
           If you don’t get this, run the following command to set its value.
           stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
    5)  Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for      all.
    6)  Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones       won't be delivered unless the user has at least read
    permission.
    7)  If it is happening for one user, can also try to delete and re add the user in the site.
    8)  Most importantly , you should try this one.
          Run this SQL query to the content db < Select * from Timerlock>
          This will give you the name of the server which is locking the content database and since when.
          In order to get rid of that lock 
          Go to that server which is locking the content db and then restart the windows timer service.
          within some time it should release the lock from content db, if not then at the most stop the timer job for some time
          Once the lock will be released then try to send some alerts
          You will surely get the email alert.
    I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
    If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
    Even after this if it is not working, then you can try these few more steps too
    9)  Try re-registering the alert template:
    stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f  "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
    10)  Try to clear the configuration cache
    If this helped you resolve your issue, please mark it Answered

  • My Itunes wont open and windows will send out an error message

    Hello
    I was working with Itunes for a long time with no problem what so ever until suddenly yesterday when I opened it I recived an error message from windows saying the process has to close and will I want to send out an error report to windows.
    I went on to move my Itunes library and repair the Itunes via the downloaded installation file but when it did not work I uninstalled it completly and reinstalled it with no effect...
    If any one have any idea as to how to solve this pls help....
    thank you

    windows installer has stopped working
    a problem caused the program to stop working correctly.
    windows will close the program and notify you if a solution is avabilable.
    ... and that's one that I wasn't thinking of ...
    Head into your Windows Update. Are there any new updates available for you? If so, and you install, does that clear up the error message?

  • Business iCal sending out multiple calendar invites - one calendar and one account, 2 people using it for work

    First question:
    My boss has a Macbook Pro (iPad & iPhone), I have a Dell and iPad.  We use his iCal for our work calendar and my Outlook is logged into his iCal so that I can load appointments & send them out to clients.  He obviously has access to the same calendar so that he can also load appointments.
    We have realised that sometimes the meeting invite, although I only send ONE invite out, will send 6 invites to a person. Here below you will see the icons that appear next to the 6 invites that the person that receives it sees next to the invites. It is therefor 3 types of emails/invites that are each sent out twice to the client.  This is obviously not ideal. Could it be that I must not include my boss in the invites (as it is already his calendar sending out the invites), or what could it be that I am doing wrong?
    Second question:
    How can I ensure that replies (Yes/No/Maybe/Comments) appear in the iCal meeting, as people reply, but those replies I have to copy and paste into the meeting as they do not currently automatically update in the meeting.
    Third question:
    Any suggestions on a better system/method?
    Please help!

    I think I know what can help. I also support Mac users in a mixed environment, and find that being able to access a Windows machine to test settings for my iCal users is very very helpful. If you do not have one, I could also fix this one by adding the user's account to my one Mac that runs Entourage.
    On a PC: set up one of the problem accounts in Outlook, then go to Tools->Options & click on the Delegates tab. Click on a Delegate name (if they all have the same permission level, you can select all), then click the Permissions button. If the delegate have "Editor" permissions, there will be a little checked box that sends the delegate copies of all those meetings. De-select it.
    Lemme know if you want Entourage instructions or if that does it for you.
    The real question, of course, is why are there so many Exchange functions that iCal can't touch. Grrrr....

  • Since upgraded phone to 2.0, cannot send out email

    I recently upgraded my iphone to 2.0 (mistake!) and now cannot send out email from my iphone. I have tried deleting all my email accounts and re-setting it up on my iphone rather than syncing with my computer but it still will not send out email. I can send out email from my computer and used the same settings for both...

    Also having mixed success sending mail on the iPhone, which is disappointing because I haven't had to send a lot of messages. Out of about 6 attempts, I've had two replies completely disappear. They weren't sent, they weren't in the outbox to send later. They just disappeared. One was while on my home network, the other was while I was traveling. I am very bothered that the emails aren't saved to try and send later.

  • My computer has been infected with a Trojan Horse.  It has completely taken over my Mac email account and was sending out malicious email to everyone in my address book.  At the same time it infected my iPhone---I am no longer able to receive or send emai

    My computer has been infected by a Trojan Horse.  It has taken over my Mac email account and began sending out malicious emails to everyone in my address book.  I cleared out my MAC address book and began using my AOL email account. It took a few days and then my AOL email account was infected and has now been send out malicious email to all my contacts for over a month.  It has also infected my iPhone--I am no longer able to send or receive emails on my iPhone.  Also, once the Trojan Horse began using my AOL email it completely blocked me from using my MAC account by sending never ending popups asking for my email password to access my MAC email account, but it never accepts my pass word.  The TH has also slowed down everything on my computer.  It's like I am working on an old PC with dial up connection instead of the high speed digital connection that I have.  The little color wheel spins constantly as I wait for sometimes over a minute for a page to pull up.  If it pulls up at all.  I have tried to use the 2 disks that came with my computer to completely remove everything on my computer and then reinstall all the programs, but I am not allowed to sweep my computer clean.  I thought maybe my disks that came with my computer were defective so I called Apple and they sent me 2 new disks.  I am not able able to clear my computer with the 2 new disks either.  I have done this before successfully so it's not something new to me.  I do remember when I believe my computer became infected:  I had googled an unusual sewing term, and I was opening what appeared to be legitimate sites, when all of a sudden a pop up appeared that said that my computer had been infected.  I immediately shut my computer off, but it was too late.  I downloaded a virus program for Mac, and it has never found a virus or problem at all.  I think it is part of this Trojan Horse, but I am unable to delete it from my computer.  It refuses to uninstall.  The Mac Trojan Horse is real and it is terrible.  If anyone has any suggestions for me I would be very appreciative,
    Beth
    vu

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • "This message cannot be sent at this time."  I have been getting this pop-up for 3 days when trying to send out mail.  I don't know what to do!  I cannot send mail from this account on any ISP. Please help!

    "This message cannot be sent at this time."  I have been getting this pop-up for 3 days when trying to send out mail.  I don't know what to do!  I cannot send mail from this account on any ISP. Please help!

    lots of people seem to be havgin a problem sending email from iCloud webmail.
    does your email address have uppercase characters in it?
    if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that

  • I havent any vocal loops on logic pro. its greyed out. How do i access this?

    I havent any vocal loops on logic pro, its greyed out. How do i access this?

    Have you downloaded the additional content?
    Go to menu bar in Logic.. and under Logic Pro/Download additonal Content, you will find what you need to download there..

  • Email Notification on Calendar list Sharepoint Foundation 2013 not sending out email

    Hi,
    Actually i have 2 problem. I just don't have any idea how to solve them.
    1 ) I have a machine installed with Windows Server2012 and Sharepoint Foundation 2013. Email invitation from system and alert me email is working fine. Then I created a few email sending workflow using sharepoint designer 2013. The email are going out fine
    for list or document library but gave out error when i tried to send from Calendar list. The error is saying that the outgoing email is not configured correctly. If that was the case, should it be that i will receive error for all.
    2) I have another machine with same installation as above but doesn't send out any kind of email(Invitation,alert me, SPD2013 custom worflow). I've checked telnet port 587, it is responding fine. I want to know if i need to open port in the firewall/router
    settings for this port or if this issue is due to something else.
    Any help is really appreciated.

    What about Relay and Authentication?
    Trevor Seward, MCC
    Follow or contact me at...
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
    Look.
    I think this is the correct configuration because it sends emails normaly with SharePoint 2010.
    If I configure my own email account in Outbound Security, Sharepoint 2013 sends emails but just when I login to Sharepoint, if other users login it doesn't send emails.
    Melvintt
    MCTS, Windows Server 2008 R2: Network Infrastructure
    MCTS, Windows Server 2008 R2: Active Directory, Configuring

  • My MBP has started to send out TCP packets larger than the MTU on the NIC - is there any place that this can be overriden?

    Got a very weird issue here and wondering if anyone has any other ideas. Basically over the wired NIC only, my Mac has started to send out large HTTP/HTTPS packets from the browser (> 1500 bytes) Captures show packet sizes from 2000 all the way to 4000 sometimes. This happens in Firefox and Chrome so doesn't appear to be application related.
    This causes fragmentation issues and traffic drops which basically causes most of my websites and  tools to crash and burn (and I get all sorts of SSL errors from applications, etc).
    It appears to be limited to just TCP packets as pings with the DF bit set will not send any larger than 1500 bytes.
    However if I switch to wireless, everything works fine and captures show the correct maximum packet size of 1500 for all packets leaving my client.
    The MTU on the  en0 interface is 1500 as per ifconfig and I made sure that it was set to 1500 in Network config panel (because there is an option for jumbo frames there which bumps up the MTU).
    A packet capture also shows that during the three way handshake the TCP MSS is successfully sent and negotiated as 1480, but then it appears to ignore that when sending packets later in the TCP stream.
    I've rebooted, upgraded to 10.7.4, checked the "sysctl" outputs and matched against a Mac not having the issue.
    This is the newest MBP 15 inch model.
    Any other ideas on things to check?

    Have you used any sort of "tuner" software? You are obviously an advanced user. Sometimes we hack things up and forget about it later. If you are sure you didn't do that, maybe poke around with IPv6 settings. Supposedly people are trying to enable that and it is going to be a disaster.

Maybe you are looking for