Logic Express Split Point Option Help

I have Logic Pro 7. I can set a split point in the score editior.
Does anyone know if this can be done in the Logic 7 Express as well. The older Logic cheaper versions do not allow this option. One of my piano students wants to upgrade to get this option if it's available. If anyone could look in the score window to see if this option is available I'd appreciate it
Thanks

Hi Jack.
I would ask this question in the Logic Express forum if you haven't already.
X

Similar Messages

Incorrect logical expression: Comparison / SELECT-OPTION can only be follow

Hi,
I'm new to ABAP, please help me with the below code. When i check the code i get the message "E:Incorrect logical expression: Comparison / SELECT-OPTION can only be followed by "AND", "OR" or ")".
data: pphd(7) type p decimals 2,
          ppha(7) type p decimals 2,
          abs_pphd(7) type p decimals 2.
    if pphd >= 0.
      if pphd < 1.
        ppha = 0.
      elseif 1 <= pphd <= 4.
        ppha = '0.16'.
      elseif 4.01 <= pphd <= 8.
        ppha = '0.32'.
      elseif 8.01 <= pphd <= 12.
        ppha = '0.50'.
      elseif 12.01 <= pphd <= 16.
        ppha = '0.66'.
      elseif 16.01 <= pphd <= 20.
        ppha = '0.83'.
      elseif 20.01 <= pphd <= 24.
        ppha = '1.00'.
      elseif 24.01 <= pphd <= 28.
        ppha = '1.16'.
      elseif 28.01 <= pphd <= 32.
        ppha = '1.32'.
      elseif pphd >= 32.
        ppha = '1.50'.
      endif.
    else.
      abs_pphd = abs( pphd ).
      if abs_pphd < 1.
        abs_ppha = 0.
      elseif 1 <= abs_pphd <= 4.
        ppha = '-0.16'.
      elseif 4.01 <= abs_pphd <= 8.
        ppha = '-0.32'.
      elseif 8.01 <= abs_pphd <= 12.
        ppha = '-0.50'.
      elseif 12.01 <= abs_pphd <= 16.
        ppha = '-0.66'.
      elseif 16.01 <= abs_pphd <= 20.
        ppha = '-0.83'.
      elseif 20.01 <= abs_pphd <= 24.
        ppha = '-1.00'.
      elseif 24.01 <= abs_pphd <= 28.
        ppha = '-1.16'.
      elseif 28.01 <= abs_pphd <= 32.
        ppha = '-1.32'.
      elseif abs_pphd >= 32.
        ppha = '-1.50'.
      endif.
    endif.
Thanks,
AM

Hi Raj,
Thanks a lot for the reply. i modified the code as you suggested but i get the error "E:Incorrect logical expression: Only "... BETWEEN AND ..." is expected." Below is the modified code.
data: pphd(7) type p decimals 2,
      ppha(7) type p decimals 2,
      abs_pphd(7) type p decimals 2.
if pphd >= 0.
if pphd < 1.
    ppha = 0.
elseif pphd between 1 and 4.
ppha = '0.16'.
elseif pphd between 4.01 and 8.
    ppha = '0.32'.
elseif pphd between 8.01 and 12.
    ppha = '0.50'.
elseif pphd between 12.01 and 16.
    ppha = '0.66'.
elseif pphd between 16.01 and 20.
    ppha = '0.83'.
elseif pphd between 20.01 and 24.
    ppha = '1.00'.
elseif pphd between 24.01 and 28.
    ppha = '1.16'.
elseif pphd between 28.01 and 32.
    ppha = '1.32'.
elseif pphd >= 32.
    ppha = '1.50'.
endif.
else.
abs_pphd = abs( pphd ).
if abs_pphd < 1.
    ppha = 0.
elseif abs_pphd between 1 and 4.
    ppha = '-0.16'.
elseif abs_pphd between 4.01 and 8.
    ppha = '-0.32'.
elseif abs_pphd between 8.01 and 12.
    ppha = '-0.50'.
elseif abs_pphd between 12.01 and 16.
    ppha = '-0.66'.
elseif abs_pphd between 16.01 and 20.
    ppha = '-0.83'.
elseif abs_pphd between 20.01 and 24.
    ppha = '-1.00'.
elseif abs_pphd between 24.01 and 28.
    ppha = '-1.16'.
elseif abs_pphd between 28.01 and 32.
    ppha = '-1.32'.
elseif abs_pphd >= 32.
    ppha = '-1.50'.
endif.
endif.

Help with Logic Express 8 - Mastering Options

Hi All,
A week ago I was trying to master a track I just finished. The options were there and read something like "final hip hop...", "final electronic...", etc. I recent deleted and reinstalled Garageband (GB) as I noticed all of my GB loops and templates were gone.
When I re-entered Logic Express and tried to master my track, I noticed all of the options were gone and replace with fewer, less appealing options such as, "Enhance Deepness", "Soft Enhancer", etc.
Does anyone have any idea what is causing this or +more importantly, how to fix it???+
Please let me know.
Thanks!!!

Thanks Fox. I'm gonna actually try to Time Machine it and see if that helps. Before I did so I just wanted to see if there was a check the box time option first...
Thanks again...

Hardware compressor and am not quite sure how to use it in logic express 9. Please help???

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not sure how to use it in logic. Please help???

Hi Ujjawal,
Use the Tab-order property of IR object.
In design mode, select the any command button, right click and select the property. you will find the window for "Tab-Order". It lists all the objects available in that dashboard. Here you can arrange the tab order..
Hope it will help you.
Thanks & Regards,
Mohit Jain

Logic Express Beginner begging for help

I recently made the step up into the Mac world and love everything about my new mac book pro except I am struggling with Logic Express. I have used Adobe Audition for many years and know it inside and out however...I cant even figure out to record my voice with a microphone.
I work in radio and only need the program to record my voice and to edit interviews (mp3 or wav files) for use on the radio. I tried hooking up my mobile pre usb pre amp up and downloaded drivers but couldn't get it to record. I can record using the built in my mic but the quality is insufficient for the airwaves.
I know this must be something very simple but I am struggling , thank you so much in advance for any help you can give.
Brian Douglas
Q102 Cincinnati

Hi,
I'd start with opening a Finder window, and go to Applications > Utilities > Audio/Midi Configuration. If you open this program, you can set your default audio inputs and outputs, and set the input level, for example. If your interface doesn't show up here, you can be pretty sure that Logic won't see it, either.
Then go to Logic, and look in Preferences > Audio >Devices. You should choose your USB preamp as your Device. As you can see, you can only choose 1 device here. BUT, in the Audio/Midi Configuration utility, you can "build" a virtual device consisting of more than one device (see the Audio menu of the utility). Just in case you'd like to use more than 1 interface in the future...
Anyway, check page 99 of Help > Logic Express 8 User Manual.
Kind regards,
Jaap

Please help with Logic Express 7 and using DFH plugin!

Hey guys, I'm really in a tight spot here as I have no idea how to get my setup working properly. I recently bought an entirely new Imac, Logic Express 7, and a drum plugin called Drumkit From **** Superior (VSTi I believe is the type of plugin they call it). It is supposed to be compatable but I see no way to get it to show up as a plugin. I tried some other programs and it shows up as a plugin and I'm able to get into the interface, but I can't in LE7.
It is supposed to be compatable as a "rewire" plugin or something like that, but I'm not too sure how to approach that differently, both manuals are very vague.
Basically, I'm wondering:
1. How would I go about getting Drumkit From **** Superior to show up as a "plugin" (and what it would be under) if I have to use it a "rewire"?
2. If I could get it running as a plugin, how would I go about programming a drum part using that "drumkit" in Logic Express?
Thanks, any help is greatly appreciated.
-Daniel

It's a tough one man, I'm actually wanting to go for EZdrummer which I think comes under the same umbrealla as DFH, the patch will come to let you upgrade to intel hopefully by September so hold onto that plug in as I think it'll be worth it in the long run. In the mean time do you have any other options to make beats?
I use Reason 3.0, I sequence my beats using Reason Drum Kits 2.0 and export them as WAV or AIFF files into Logic, do you have anything similar that you can do? write you beats else where and import into Logic?

Using External Sound Modules (Synths) in Logic Express?

Hi all,
I don't have Logic Express yet. I want to know if what I want to do is possible before I purchase. It may sound trivial, but I'm very new to the whole DAW environment. Apparently Garageband can't support my external sound modules so I'm hoping Logic Express will.
To help, please see my hardware midi setup diagram here:
http://www.greddin.com/images/My-Midi-Setup.jpg
Will I be able to add tracks that will play the external sound devices like the Wavestation and JD-990? Can you change the sounds through Logic? To what extent can I use my external sound modules?
Thanks all,
-Greg

Hi,
1st: Yes, Logic Express has "external MIDI" tracks that function similar to the "software instrument" tracks but trigger external instruments.
2nd: But: To setup these tracks, especially with more than one device, needs some experience with MIDI, the channels, patch selection via MIDI etc. The real downside is you have to find out which commands you need to "tell" your devices to change sounds and these things. Since there is no standard command for this, you'll have to look it up in your devices manual and use the MSB/LSB Values- which you have to enter manually. However, once you found it out, you can save these things as templates and use them in the future. So yes, it is very possible, but expect some learning curve.
3rd: You can use your sound modules to their full extent. Logic features a mighty MIDI environment setup once you learned how to use it.
Fox

Incorrect Logical Expression for Include Program

Hi All
thank you very much for all the support...
I managed to get through that error - however, now I m coming up with a different error:
Incorrect logical expression: Comparison / SELECT-OPTION can only be
followed by "AND", "OR" or ")".
Where should I add the ''and" "or" on the below code?
IF sy-subrc NE 0.
    MESSAGE e002(zsqts_sqts)
       INTO l_dummy
       WITH lv_host.
    PERFORM msg_add USING probclass_very_high.
ENDIF.
Zu der gewunschten FTP Ordner navigieren
REFRESH result.
IF lv_path IS NOT INITIAL.
    CONCATENATE 'cd' lv_path INTO lv_path SEPARATED BY space.
    CALL FUNCTION 'FTP_COMMAND'
      EXPORTING
        handle        = lv_handle
        command       = lv_path
      TABLES
        data          = result
      EXCEPTIONS
        tcpip_error   = 1
        command_error = 2
        data_error    = 3.
Thank you very much
Rukshana
Moderator message: please try solving this yourself first, do not post each single error message to the forum. SCN forums cannot replace proper training.
locked by: Thomas Zloch on Oct 6, 2010 1:04 PM

On 3/20/2015 3:48 PM, leosucksatc wrote:
if(Grade ='A'||'a')
= is assignment. == is equality comparison. You had that right in your previous post.
Also, the || operator doesn't work the way you think it does. Make it
if (Grade == 'A' || Grade == 'a')
Igor Tandetnik

Setting midi channel for ES2 in logic express 9

i have a track selected with an ES2 patch
I can play from my midi keyboard, sounds good and I can see the midi coming in from my midi channel
problem is it's not the midi channel i selected in logic for the track
it appears everything with logic is in omni mode
i can play one of my keyboards in channel 3 and the other keyboard in channel 5 and both trigger in logic channel set to midi channel 7
please, any suggestions?

Unfortunately it did not work. I am playing in midi channel 6, and it shows properly on the midi in/out panel near the bottom of the screen by the numerator and cpu meter. Shows the midi notes coming in just fine
I have my software synth track selected as midi channel 3, and it plays this track....while my controller is in channel 6
I can also set iLogic Express to play an external midi track to any midi channel and it will still play no matter what channel my incoming midi channel is set to (1 - 16)
Midi is getting into Logic Express just fine
So why will it not only play in the midi channel I have selected for the track?
I also want to use an additional midi keyboard (or usb) to play a different track and midi channel, but they all play as if in omni mode regardless of the channel set from the transmitting keyboard and the information showing on the midi in/out panel
I am using an old Motu 8x8 midi interface into an M-Audio Firewire Audiophile which has one single midi in and out (no midi thru) to the mac.
Works like a charm except in Logic Express
Thanks for your help - I'm truly lost..... and I did read the manual cover to cover to try and find the answer
Thanks

Will Logic Express 8 run if I upgrade my G3 B&W?

My system I'm running at the moment is: G3 PowerMac 400Mhz/1MB Cache
512MB PC100 RAM
ATI Rage128 16MB Video Card
MOTU PCI-324 Audio Card/MOTU 2408 MKII
Adaptec SCSI PCI Card
Western Digital 40GB IDE Hard Drive
Original Apple 9GB Hard Drive
40GB IBM 10000Rpm SCSI Hard Drive
17GB IBM 10000Rpm SCSI Hard Drive
I am looking at upgrading the Processor to: G4 1GHz Powerlogix ZIF Upgrade
1GB PC100 RAM
ATI Radeon 9200 Mac Edition 128MB
If I upgrade to this will my machine then run Logic Express 8, or will it do as it does now and just act like it is starting by bouncing the icon in the dock then stopping? At the moment I cannot run Adobe CS3 Design/Web Premium or my Logic Express 8. Please Help!!!

Hi Spencer,
As a general rule the minumum system requirements listed for a software are just that, the minimum required for the effective use of the program. If you make the changes you're talking about you may be able to run the program but it will probably not run well. I'm running Express 8 on a 1.83GHz intel iMac with 2 gigs ram. My current project involves only seven software instruments and six enternal midi tracks (which use almost no cpu) and I'm still nearing %70 on my cpu meter. Before I finish I will definately be freezing tracks to free up cpu. My system is much faster and double the ram of what you're talking about. If you really want to run Express 8 properly you will probably need to replace your computer.
Rainguitar

Want to Upgrade My G3 B&W to run Logic Express 8 but is it possible?

My system I'm running at the moment is: G3 PowerMac 400Mhz/1MB Cache
512MB PC100 RAM
ATI Rage128 16MB Video Card
MOTU PCI-324 Audio Card/MOTU 2408 MKII
Adaptec SCSI PCI Card
Western Digital 40GB IDE Hard Drive
Original Apple 9GB Hard Drive
40GB IBM 10000Rpm SCSI Hard Drive
17GB IBM 10000Rpm SCSI Hard Drive
I am looking at upgrading the Processor to: G4 1GHz Powerlogix ZIF Upgrade
1GB PC100 RAM
ATI Radeon 9200 Mac Edition 128MB
If I upgrade to this will my machine then run Logic Express 8, or will it do as it does now and just act like it is starting by bouncing the icon in the dock then stopping? At the moment I cannot run Adobe CS3 Design/Web Premium or my Logic Express 8. Please Help!!!

Give up the ghost on that one, there's no way you'll ever get LE 8 running right on that, even with the upgrades.
fist the specs here:
http://www.apple.com/logicexpress/specs/
The G4 at 1.25 is the slowest mac that meets that but that has a memory speed of ddr 333.
If you put in the 1 Ghz g4 upgrade it will drop the memory speed to 66 which will kill your latency.
It will probably install and run but you will either have pops and cracks or have to set it to a 1 second buffer.
The video card is overkill as well. You wont see that much a difference unless you try to play 3D games on it, but in that case the fact that it is on the PCI bus will be the bottleneck.
If anything get one of those hacked nVidia 5200 cards so you can at least get core graphics going and take a few of cycles off the CPU.
Usually when an app. bounces in the dock and doesn't start its because there is not enough memory. If the app sees that parts of itself are getting loaded into virtual memory it will stop.

Garageband and Logic Express 7.2.. HELP ME!

Hello,
I have had my secondhand mac for a week. It came with Garageband08 and I have just bought Logic Express 7.2 to have some fun with
Needless to say I am completely new to this ans have a few problems..
Can anyone please tell me how I get Garageband to recognize the Apple Loops/Jam Packs that came with Logic Express as they don't seem to pull though in the Virtual Instrument browser or the Apple Loops
Also, even before I bought Logic Express some loops seem to be duplicated. I guess this means they are stored in two different folders - where is the best place to store them (and which folder should I look to delete)
Plus.. when I pull up the loop browser it says I have 600 odd loops, but the scroll down box shows barely half that amount?
Lastly, I have a few Prosamples cd's - where do I store these so they pull through into Apple Loops (this may help the problem above)
Any and all advice given to this newbie would be REALLY APPRECIATED!!

Can anyone give me a few pointer on how to rewire
ableton with le7.2??
The problem i have is that rewire DOES show up in the
environment page, but i just dont know where to start
from there. I always get intimmidated by that
environment thing in logic.
First, you don't need to do anything with the Environment if you don't need to send MIDI TO Live. If all you want is to get audio FROM Live, follow these instructions:
1. Create a new track in the Arrange window. You should be given the option to create a ReWire track. If so, select it. Your new track appears in the arrange.
2. In the parameters window on the left of screen, you'll see a value called "Channel". Click and hold, then select "Audio", then "Rewire", then "Ableton Live", then "Mix L/R"
3. Now launch Live. Any audio you play should be piped into Logic via the channel you created.
If you need to control Live via MIDI from Logic, all you need to do is create a Rewire object in the Environment, call it "Live", and change the "Device" parameter (again in the parameters box on the left of the screen) to "Live" and change the "Bus" parameter to whatever device you want to control within Live (or Reason, or any other Rewire slave). This is detailed on page 238-239 of the Logic Pro manual, which is available here (http://manuals.info.apple.com/en/LogicPro7_ReferenceManual.pdf).
Sorry that I'm not in front of Logic at the moment, and some of the names of things might be slightly different. But this should get you started.

Logic Express- Need Help

I've just started to use "Logic Express" after upgrading from Life's "Garageband" and I've been working on this new track, So my question is, how do I use the velocity tool and does it make a difference to the quality of my mix, I'm trying to get the instrument sounds to blend in better is there a advance way to measure it's instruments parameter any advise would be helpful, Thanks.

Velocity in MIDI editing is used for adjusting expression. Yes, it makes a difference, because most often it affects the volume of the instrument. Sometimes velocity is also used to change filter behaviours. So yeah, the higher the velocity, the higher the volume and the more radical the change in filters with parameters linked to velocity value.
To use velocity tool is very simple. After selecting it, the pointer changes to the arrow with a 'v' symbol on its right side. You can select note events and then click-hold on them: move mouse up/down to change the velocity value.
When the value is changed like that with several note events selected, values are changed in the similar way (each note's initial velocity is changed by certain points). However, when you hold Shift+Option while doing that, velocity for all selected notes will be adjusted to the same value.

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

Drums on Logic Express 8 Help needed

Hi there,
I recently brought an imac, purely for my girfriend who writes and records her own music. We have Logic Express 8, and my partner loves it compared to cubase on her old pc! I myself play the drums, and would love to record drums onto this program. I have a real 13 piece kit, with mesh heads fitted to keep the noise down. Recording via a mic is not an option due to noise etc. Is there a way of triggering my drums to get a sound in Logic? I apologise if this sounds crazy, but I am a bit behind on the times! Any help on whether this is possible and what I will need is greatly appreciated!
Many thanks,
Keith.

Their are multiple ways to record drums:
* firstly, acoustic drums could only be micd, if you are looking to record with what you have, im afraid that's your only option
*secondly, you could always use a sampler and trigger your drum samples with a midi keyboard, but i hate this method personally
*thirdly, you could invest in a program such as EZ-Drummer, which has some very nice drum loops all organized by tempo...all you do is simply drag the loop into the arrange window, and if you'd like, you could open the piano roll and manipulate that loop
*and the fourth (and in my opinion the best) method, is to sell those acoustic drums, and buy yourself an electronic drum kit...you can quantize your notes, you could load any sound sample you want on those pads to get a very diverse range of recordings...and best of all, no microphones! also, volume isn't a problem, if you want to play at 2 in the morning without waking the neighbors, then just through on some headphones and jam away
im not sure if you wanted to know any of that cause i may of misinterpreted your question, but i tried.

Logic Express Split Point Option Help

Similar Messages

Maybe you are looking for