Logic for display column on condition

HI Experts,
I need to make report in which on User input in check boxes the desired colums will display. This report is Customer aging. I have 4 check boxes.
1. 0-60 days
2. 61-90 days.
3. 91-120 days
4. 121-180 days.
User can check any check box wether it is single or 1 & 3 or 2 & 4 or 2 & 3 etc. to see the desired coloum. wHAT WILL BE THE logic and code to display the clicked colums. if it is difficult then u can display all colums but the data shuld b in clicked columns. iTs urgent.
Thanks.
Khan

Hello Khan,
I dont know about displaying only those columns, you may have to put different write statements for each possible case
for getting blank values to be displayed in unchecked columns, you can use this
(since i dont know your field names, i have given my own names)
if p_sixty = ''.
loop at itab.
     itab-sixty = ''.
     modify itab.
endloop.
endif.
if p_ninety = ''.
loop at itab.
     itab-ninety = ''.
     modify itab.
endloop.
endif.
if p_onety = ''.
loop at itab.
     itab-onety = ''.
     modify itab.
endloop.
endif.
if p_oneey = ''.
loop at itab.
     itab-oneey = ''.
     modify itab.
endloop.
endif.
loop at itab.
write:/ itab-sixty , itab-ninety, itab-onety, itab-oneey.
endloop.

Similar Messages

Display column value conditionally

Hi all,
I have a report with two columns and I would like to display the second column based on the value of the first one; if the first column is equal to 1 then show the second column :
Col1 Col2
0
1 value
1 value
0
0
I tried to put a condition on column 2 but it doesn't work (Item in Expression1 = Expression 2), "value" is never displayed ...
Best regards,
Othman.

This is the right way of doing things like that:
SQL> SELECT deptno, CASE
2            WHEN deptno = 20
3               THEN ename
4            ELSE NULL
5         END ename
6    FROM emp;
    DEPTNO ENAME
        30
        30
        10
        20 JONES
        20 SCOTT
        20 FORD
        20 SMITH
        30
        30
        30
        30
    DEPTNO ENAME
        10
        30
13 Zeilen ausgewählt.Have a look at my demo application:
http://htmldb.oracle.com/pls/otn/f?p=31517:1
You will find a lot of examples there, doing the same thing.
Denes Kubicek

Logic for Excel Column

Hi
Presently, I am using excel interface with JAVA using jcom library
As you know, Excel has columns: A,B,C....Z,AA,AB,AC,......,AZ,BA,BB,....BZ,CA... and so on
My problem is that I want to create a function in JAVA whose prototype is:
String getColName(String col,int add)
you can understand working of this function by following examples:
getColName("H",0) returns "H"
getColName("H",3) returns "K"
getColName("Y",3) returns "AB"
getColName("AZ",5) returns "HE"
And So On
I hope, u understand that what kind of function, I want to create
Please tell me the logic behind it. Send me defination of this function.
Thanx
GAJESH TRIPATHI

I was in a good mood... if this is homework I wish you luck understanding it enough to explain it.
public class XLCols {
   public static void main(String[] args) {
      System.out.println(getOffsetCol("H", 0));
      System.out.println(getOffsetCol("H", 3));
      System.out.println(getOffsetCol("Y", 3));
      System.out.println(getOffsetCol("AZ", 5));
   static int toPos(String col) {
      int pos = 0;
      for (int i = 0; i < col.length(); i++) {
         pos *= 26;
         pos += Integer.parseInt(col.substring(i, i + 1), 36) - 9;
      return pos;
   static String toCol (int pos) {
      String col = "";
      while(pos > 0) {
         pos--;
         col = (char) (pos % 26 + 65) + col;
         pos = pos / 26;
      return col;
   static String getOffsetCol (String col, int offset) {
      return toCol(toPos(col) + offset);
}And YTF should
getColName("AZ",5) returns "HE"and not "BE"?
db

Authorization scheme for display/read only conditions on item level

Hi All,
I have question. I want to use an authorization scheme to manage if users with a certain role have the permission to either update an item or have the persmission to only see the item or that they don't have permission to see it at all.
So, the input for the scheme would be: 1. user role 2. the current page 3. the current item.
The output would be: 0 (update) 1 (read only) 2 (not displayed).
I think I can manage that.
And I can attach this schema to the items.
So far so good.
But how can I make it so that the 0,1 and the 2 will actually do what they need to do?
I have been thinking about making a function like GET_AUTHORISATON(ROLE,PAGE,ITEM) output: 0,1,2 but I still can't figure out how to connect this with the functionality I want to achieve.
Can somebody give me a hint?
Andre

Thanks Hari,
Thanks, it works, almost, but what if items are mandatory on a page, but not always mandatory?
If a user has a certain role, some fields are manadatory, otherwise not.
Again, a function would do the trick as far as the input and output information
something like IS_MANDATORY(USER_ROLE, CURRENT_PAGE, CURRENT_ITEM) but how can I make it work?
I guess a PL/SQL validation like:
IF IS_MANDATORY(USER_ROLE, CURRENT_PAGE, CURRENT_ITEM) THEN ITEM IS NOT NULL
END IF;
Andre
PS: personally I think item level security is not something you wish to implement in your system. I prefer different screens for different roles.
Far more straightforeward. Easy for maintenance. When something disfunctions, it's far more easy to pinpoint the location of the cause.

Logic for displaying nested nodes.

helo all
i have to display a report in a heirarchical tree structure . I am able to display the report in heirarchical format .
The following is my requirement . I'm able to do it for 2 nodes . but how to build the nodes for the below requirement .
Step 1 : Once User enters DB, Go to CHVW with No Receipt Indicator as Space and CHARG as DB # Entered on screen(Parent Node)
Step2: Check the Movement indicator if it is u2018Bu2019 then itu2019s a Raw material No further Drill Down (Last Node), If It is u2018Fu2019 then Go to Step 3.
Step 3: Get all the Unique DB # and Corresponding Orders, Display only DB# on Output (Child Nodes)
OUTPUT - ALV TREE STRUCTURE
If User Clicks on any DB# (Child Node):
      Then DB# Selected Will Become a Parent Node, Repeat the Same Process from 1 to 3.
Table: CHVW                                                                                DB#  Order  DB#  Order
Tree
DB1
-      DB1.1
   -     DB1.1.1
   -     DB1.1.2
   -     DB1.1.3
            -   DB1.1.3.1                               -
 DB # of Raw material No further drill Down
                  - Material Document          -
 Display Material Doc #
    -      DB1.2
                  -      DB1.3
                         - DB1.3.1
                        -   DB1.3.2
can anone give me some clue..

Yea Sandra , You are right .
let me explain my requirement clearly .
first of all i need to use only table CHVW for my requirement .
the user enters the batch number in the selection screen. For that batch number, i have fetch the production order number and batch number .this forms the first node .
For the second node , i have to again select from Chvw table using the production order numbers obtained from the first select statement . the batch numbers obtained from this select query will form the second nodes. IF the movement type indicator is B ,then these is the last node
otherwise we have to repeat above procedure untill we movement type indicator for a particular batch number is 'B'.
i'e for each of the batch numbers in the second nodes, i have to again get the production orders and for that production orders i have to fetch the batch numbers again .these will form the 3rd node .
if at this step the movemtn type indicator is 'B' ths is the last node. other wise the same step should be repeated.
could u plz give me some clue ....

Query for displaying columns in reverse order ?

Hi All,
I want to select/display all the columns of a table in reverse order. The no. of columns is arbitrary.
Can anyone please help me on this.\
Regards
-AKJ

apart from the physical data store implementation,
are columns actually guaranteed ordering ? Guaranteed.... probably not, but they are in the data dictionary in the order in which they are created, so are known to be consistent in that respect.
I don't think it's correct to refer to C(1)...C(n) ,
they are just columns, there's no particular reason
why one should come first or lastLikewise, I don't see the point in selecting columns out in a particular order unless you're trying to spool the output to a file.

Need some logic for displaying data from Internal Table

Hi Guys,
              I have a Internal Table with multiple entries.
My ITAB looks like below.
PN VBELN MATNR MATKX
1     111       P-101    XXX
2     121       P-102    XYZ
2     112       P-103    ABC
3     134       P-104    DEF
3     124       P-105    EFG
Now my requirement is I need to display the out put as follows through ALV or normal display.
<Header>                                                  <Date>
                                                                  <Time>
PN = 1
VBELN   MATNR MATKX
111         P-101   XXX
<Footer>
Some gap (May be a line to differentiate)
<Header >                                                <Date>
                                                                 <Time>
PN = 2
VBELN   MATNR MATKX
121         P-102   XYZ
112         P-102   ABC
<Footer>
Some gap (May be a line to differentiate)
<Header >                                                <Date>
                                                                 <Time>
PN = 3
VBELN   MATNR MATKX
134         P-104   DEF
124         P-105   EFG
<Footer>
Thanks in Advance.
Prasad.

HI,
Use:
Data: W_PNlike PN.
LOOP AT ITAB.
If Itab-PN ne W_PN.
<Header> <Date>
<Time>
PN = 1.
VBELN MATNR MATKX   >>>>>>>>>>>>>>>First Line enter
ELSE.
VBELN MATNR MATKX > line Next entry
ENDIF.
W_PN = ITAB-PN.
AT-END PN.
<Footer>
ENDAT.
ENDLOOP.
Hope this resolve your issue.
Regards,
Gurpreet

How to define logic to BO for display of more meaningful messages in Webi?

Hi All.
Greetings for the Festive Season.
We would like to know as to how to define the logic to our BO application while displaying messages to end users of Web Intelligence.
We have defined restrictions for various users and restrictions are appliced correctly when the user logs in.
We have some MIS REPORTS in Web Inetlligence with different charts and we have also given links to various other web intelligence reports at the bottom for users to click and view or do analysis.
And if any user if he/ or she is not authorised to view any / or part of the report - it does not show up.
Which works well.
But if some user is not part of any group and is not authorised to view data in a particular report, then we see a standard message coming in like :
"No Data to retrieve in Query1" or "No Data to retrieve in ABC".
Which one could say is correct. Because for that particular user, the query has NO data.
But. We feel there has to be a logic to be defined differently with the applicaton.
How do we differentiate - as to whether the query does not really have data at the back end and HENCE it is saying No data to retrieve in the Query or report
OR whether the user who is trying to view report is NOT authorised to view
AND HENCE the message is displayed as "No Data to Retrieve"
We looked at the source file and it is pointing to :../AnalyticalReporting/viewers/cdz_adv/ViewDocument.jsp?
But we found it a bit difficult to understand the logic there.
Could anyone advise as to how we could define this logic for Web Intelligence - so that messages we see on screen for the end user could be more meaningful ? How do we really make the system understand or look for 2 options as to whether the message to be displayed is because there is REALLY NO DATA AT THE DATABASE LEVEL, OR whether the USER is not authorised to view this data.
Can this be made possible by any means or thro SDK ?
Many thanks
Regards
Indu
Edited by: Indumathy Narayanan on Dec 21, 2010 9:50 AM
Edited by: Indumathy Narayanan on Dec 21, 2010 9:51 AM
Edited by: Indumathy Narayanan on Dec 21, 2010 9:54 AM

Here is my current report detail view.
[http://s49.photobucket.com/albums/f270/helenen/add/?action=view&current=2010-06-2511-44-20.png]
(click on link and view at 100%)
The 3 rd KF column is the calculated ratio which is => 2nd Column (Work Hrs) A% 1st column (PlanHrs)
Right now, I cann't get % at detail line (they're now shown as X, because PlanHrs is not null at detail line.
I'd like those X should be calculated as => WorkHrs (at that line) A% PlanHrs (of that specific employee) .
For example: 16 A% 1827 = 0.875%
It seems soo eassy but I coulnd't do it.

Conditionally displayed columns of interactive report not displayed

We have an interactive report in which few of the columns have been defined with conditions for display.
But on the interactive report page, when the conditions are satisfied these columns do not display in the report by default.
These columns are found in the 'Select Columns' -> 'do not display' pane. Everytime the report is run, these columns need to be selected using the select column.
Is there anyway to make the columns appear in the report by default, when conditions are true.

Thanks Jari for your help.
For this issue, we finally came up with a work around.
we removed the conditions from all the columns then ran the application report page.
Clicked on Select Columns and moved the columns from the do not display pane to the right pane.
Ordered them as needed. Then saved the report as primary.
Then again went to the edit page-> interactive report and applied the conditions to the necessary columns.
and it worked.
When I went to the report these columns are displayed by default.

Conditional display column in report

Hi,
If we have a single row report of 30 columns, and I want to display only the one with any values but null and hide the null ones, Is there a way to do it?
It's the same issue discussed in this thread conditional display column in report
thanks,
Fadi.

Samara - I suspect there are a few ways to do this, but none obvious or very easy as far as I can see.
You can create dynamic SQL (as Arie and others have suggested) to only include the columns that are not null.
You can build and output the HTML directly to the page, choosing only to include the values that are not null.
You can create a set of conditions that you can apply to the report columns. A very crude example might be 30 hidden page items like 'SHOW_COL1' etc. (not great, I know), or perhaps you could set a hidden page item to a value like '01:02:03:'etc., with the number only being included if the value is not null (so that col3 being null gives you '01:02::04'etc.), so that the condition for each column is 'Text in expr 1 in contained in Item in expr 2', where expr 1 is '01' for column 1 etc.
Sorry, that is a very contrived example, but it's just to illustrate that there's generally a way of doing pretty much anything in APEX. You might create your item containing the comparison expression by requerying the data in this kind of way:
SELECT NVL2(column1, '01', '') || ':' || NVL2(column2, '02', '') || ':' etc.
FROM table
WHERE condition
However, wanting to create a single-row report with nulls hidden makes we wonder what you're actually trying to achieve and whether there's a better way? Could you use a series of page items, for example?
John.

AJAX Report Refresh a_report- Condition for display not being validated

Hi ,
I have a report which has the following condition for dispaly:
Exists(SQL query returs atleast one row) - SELECT * from temp1The query for the report is : select * from temp1 Now I have a button on the page and on click of the button I call the below Javascript :
function f_insert_Temp_table(pTrans){
      var l_Return = null;
      var get = new htmldb_Get(null,$x('pFlowId').value,
              'APPLICATION_PROCESS=temp_table_insert',206);       // ODP to insert into temp1
      get.add('TRANS_ID_ITEM',pTrans);
      gReturn = get.get('');
     //alert(gReturn);
     //$x_Show('6342610690289435');
     $a_report('6342610690289435','1','15','15');
}Everything executes fine and the report refreshes the rows but the condition used for display doesn't get checked when I call $a_report() ...
I can see the ODP execute successfully and row gets inserted into temp1 which means report condition is satisfied .
If I remove the condition for the report, I can see the report getting refreshed and showing new rows through the $a_Report() call.
Is there something that needs to be added to the script or $a_report call to validate the condition too ?Is there a way I can validate the region condition too ?
Appreciate any suggestions/pointers here. I really do not want to refresh the whole page.
Thanks,
Dippy
Edited by: Dippy on Feb 5, 2010 11:05 AM

Hi Flavio,
Thanks for your support.I figured where I was going completely wrong.
Its just that when the page loads for the first time the temp table is empty and hence the report is not being displayed which simply
means that the report id Im passing into the a_report function is not rendered on the page. Hence no matter what the temp table contains the report id is absent from the page.
I fixed it as follows :
Remove the condition for the report.
Added and item and computed(P_Compute) its value using select count(*) from temp.
Added an onload JS function which does a $x_Show('Report_Region') if P_Compute > 0 or $x_Hide('Report_Region') if P_Compute <0 .
Now in my JS function which has an AJAX call to an ODP does an $x_Show('Report_Region').
Flavioc : the query for my report is simple
select * from tempIt finally dawned upon me that I'm trying to catch hold of an ID that's not rendered.
So one issue is solved now the other part would be figuring out how to make $a_report work with pagination etc .

Passing two values in a column prompt for display and filtering

Hi All,
Is there a workaround to use two columns in a prompt for display and passing the input value for a prompt value in dashboard prompt? For eg we want to display the description in the prompt but pass the id to the filter value or presentation variable, just like we have in bi publisher,LOV automatically grab the two value for display and actual value to pass to the query.Therefore, user will click the description and corresponding id will be saved in presentation variable from the prompt .
Thanks,
Sushil
Edited by: 872073 on Apr 5, 2013 11:06 AM

Check this
http://www.rittmanmead.com/2010/08/oracle-bi-ee-11g-handling-double-columns-iddescription-interoperability/

Display columns for Null Values in Crosstab

Hi All,
I have developed a crosstab in CR based on SAP BW Query. Report requirement demands to display all columns even though data is not present for those columns. However this report doesn't show the columns when there is no data. Can you please help to resolve this issue !!!
Regards,
Samir

Samir,
As Abhilash stated, the crosstab rows/columns are like groups.
If you do not have a value to create a column, it will not show in the crosstab. Do you have a table that lists all the values you wish to show in the columns? Is it used in the report? Perhaps you can use it to create the columns by using a left outer link from the table with all the values to data table you are reporting on, and use it for your columns
If the columns are dates, and you do not have data for a particular date, that can be done.
[This post has a solution for a SQL server|How to dynamically create a table to join with;.
[Here is another solution|Generating Calendar Months for the year;.
There are other posts regarding this issue. I can not think of one at the moment for building a table for values other than a date but I am pretty sure I have seen one.
Debi

To make different colours for the columns of ALV report in Grid display.

Hai Friends,
                   I have created an ALV report in grid display method by using the call function reuse_alv_grid_display.
I have obtained the report.In that report i want to change the colour of each column.Plz provide the answer with a sample program.
                Thank u.

hi i had a program for the rows with diff colors....do the same thing for the columns..
REPORT zdemo_alvgrid                 .
TABLES:     ekko.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
line_color(4) type c,     "Used to store row color attributes
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
      Build Fieldcatalog for ALV Report
form build_fieldcatalog.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
Set layout field for row attributes(i.e. color)
gd_layout-info_fieldname =      'LINE_COLOR'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
data: ld_color(1) type c.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
*Populate field with color attributes
loop at it_ekko into wa_ekko.
ld_color = ld_color + 1.
Only 7 colours so need to reset color value
if ld_color = 8.
    ld_color = 1.
endif.
concatenate 'C' ld_color '10' into wa_ekko-line_color.
wa_ekko-line_color = 'C410'.
modify it_ekko from wa_ekko.
endloop.
endform.                    " DATA_RETRIEVAL
regards,
venkat

Interaction enabled on dimensional columns though not marked as Use for display

Hi,
I am facing issue with few of the dimensional columns in OBI 11g. Drill down property is enabled for few columns which are not marked as Use for Display or added to any hierarchy level.
Clicking on these columns is drilling down to the next lower lever. we can avoid this by setting a system wide defaults but not allowed to do that.
Any other suggestions to overcome the issue?
Thanks,
Vj

Any dimensional attribute column residing on a higher level of aggregation will automatically render the drill-down to its next lower-level child.
"Use for display" defines the attribute(s) displayed by default after a drill and is used to populate the property of the (default) displayed presentation column in a presentation hierarchy.
So you are experiencing standard, desired behaviour. Removing that interaction will necessitate setting system-wide defaults.
Cheers

Logic for display column on condition

Similar Messages

Maybe you are looking for