Logic - Using GET function
Hi all,
it seems that the useful GET function wasn't supported in BPC 7.0NW. Have you any information about the availability of this function in BPC 7.5NW?
regards,
Alex
But, as is documented [in the help|http://help.sap.com/saphelp_bpc75_nw/helpdata/en/25/8d51050c43496887ddff88f13e5f1a/frameset.htm], you can use MDX tuples in place of GET statements to achieve the same functionality.
Cheers,
Ethan
Similar Messages
-
How to use Logical database in function module?
I will create a function module in HR.
but how to use Logical database in function module ? Logical database PNP always show screen.in function (RFC) code , it is a matter.You cannot attach the LDB to the main program of the function group.
- So you may [SUBMIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=submit&adv=false&sortby=cm_rnd_rankvalue] a report which use the LDB and get back the data (export/import), by default in the syntax of SUBMIT the selection-screen will not be displayed
- Use [LDB_PROCESS|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ldb_process&cat=sdn_all], fill a structured table for selection, and get data back in another table
- Use [HR function modules to read Infotypes|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrfunctionmodulestoread+Infotypes&adv=false&sortby=cm_rnd_rankvalue].
Regards -
How to use a Logical Database in Function Module.
Hi Experts,
I want to use a logical database in a Function Module to fetch data from a standard SAP table into a Internal table for certain filter conditions.
How can I get get this done????
I called LDB_PROCESS FM in my FM, but I could not figure out how to store the extract in my IT table since we cant use GET in FM.
Please provide me a sample code if possible.
Thanks in Advance,
Alex.Hi,
i had an example program like this ,in this i want to get the data using pnp logical database with 5 fields in an interface program.
data: begin of it_final occurs 0,
pernr like pa0002-pernr,
vorna like pa0002-vorna,
nachn like pa0002-nachn,
usrid like pa0105-usrid,
usrid_long like pa0105-usrid_long,
end of it_final.
get pernr.
clear : p0000,p0002,p0105.
rp-provide-from-last p0000 space p_date p_date.
if p0000-stat2 = '3'.
v_pernr = pnppernr-low.
else.
reject.
endif.
*---Get employee pernr, First name ,Last name into final table
rp-provide-from-last p0002 space p_date p_date.
if pnp-sw-found = '1'.
it_final-pernr = p0002-pernr.
it_final-vorna = p0002-vorna.
it_final-nachn = p0002-nachn.
else.
*---Error message if not infotype 0002 maintained
T_ERROR-PERNR = pnppernr-low.
CONCATENATE TEXT-EMI '0002'
INTO T_ERROR-MESSAGE SEPARATED BY SPACE.
APPEND T_ERROR.
CLEAR T_ERROR.
endif.
**--Get SYSTEM USERNAME to final table
rp-provide-from-last p0105 0001 p_date p_date.
if pnp-sw-found = '1'.
it_final-usrid = p0105-usrid.
else.
*---Error message if not SYSTEM USERNAME maintained
T_ERROR-PERNR = pnppernr-low.
CONCATENATE TEXT-003 '0105'
INTO T_ERROR-MESSAGE SEPARATED BY SPACE.
APPEND T_ERROR.
CLEAR T_ERROR.
endif.
**--Get Email ID to final table
rp-provide-from-last p0105 0010 p_date p_date.
if pnp-sw-found = '1'.
it_final-usrid_long = p0105-usrid_long.
else.
*---Error message if not Email ID maintained
T_ERROR-PERNR = pnppernr-low.
CONCATENATE TEXT-004 '0105'
INTO T_ERROR-MESSAGE SEPARATED BY SPACE.
APPEND T_ERROR.
CLEAR T_ERROR.
endif.
append it_final.
clear it_final.
reward points if useful,
venkat. -
Using analytic function to get the right output.
Dear all;
I have the following sample date below
create table temp_one
id number(30),
placeid varchar2(400),
issuedate date,
person varchar2(400),
failures number(30),
primary key(id)
insert into temp_one values (1, 'NY', to_date('03/04/2011', 'MM/DD/YYYY'), 'John', 3);
insert into temp_one values (2, 'NY', to_date('03/03/2011', 'MM/DD/YYYY'), 'Adam', 7);
insert into temp_one values (3, 'Mexico', to_date('03/04/2011', 'MM/DD/YYYY'), 'Wendy', 3);
insert into temp_one values (4, 'Mexico', to_date('03/14/2011', 'MM/DD/YYYY'), 'Gerry', 3);
insert into temp_one values (5, 'Mexico', to_date('03/15/2011', 'MM/DD/YYYY'), 'Zick', 9);
insert into temp_one values (6, 'London', to_date('03/16/2011', 'MM/DD/YYYY'), 'Mike', 8);this is output I desire
placeid issueperiod failures
NY 02/28/2011 - 03/06/2011 10
Mexico 02/28/2011 - 03/06/2011 3
Mexico 03/14/2011 - 03/20/2011 12
London 03/14/2011 - 03/20/2011 8All help is appreciated. I will post my query as soon as I am able to think of a good logic for this...hI,
user13328581 wrote:
... Kindly note, I am still learning how to use analytic functions.That doesn't matter; analytic functions won't help in this problem. The aggregate SUM function is all you need.
But what do you need to GROUP BY? What is each row of the result set going to represent? A placeid? Yes, each row will represent only one placedid, but it's going to be divided further. You want a separate row of output for every placeid and week, so you'll want to GROUP BY placeid and week. You don't want to GROUP BY the raw issuedate; that would put March 3 and March 4 into separate groups. And you don't want to GROUP BY failures; that would mean a row with 3 failures could never be in the same group as a row with 9 failures.
This gets the output you posted from the sample data you posted:
SELECT placeid
, TO_CHAR ( TRUNC (issuedate, 'IW')
, 'MM/DD/YYYY'
) || ' - '|| TO_CHAR ( TRUNC (issuedate, 'IW') + 6
, 'MM/DD/YYY'
) AS issueperiod
, SUM (failures) AS sumfailures
FROM temp_one
GROUP BY placeid
, TRUNC (issuedate, 'IW')
;You could use a sub-query to compute TRUNC (issuedate, 'IW') once. The code would be about as complicated, efficiency probably won't improve noticeably, and the the results would be the same. -
Use GET PERNR without any screen default from Logical DB.
Could anyone help me how to avoid using screen default from logical DB if using GET PERNR?
Are u saying using this logic below , im can avoid using GET PERNR?
TABLES: RP50G,PERNR,PYORGSCREEN,PYTIMESCREEN.
DATA: IN_RGDIR LIKE PC261 OCCURS 0 WITH HEADER LINE,
WA_RT LIKE PC207 OCCURS 0 WITH HEADER LINE,
SEQNR LIKE PC261-SEQNR,
RESULT TYPE PAY99_RESULT.
DATA: M_START LIKE SY-DATUM,
M_END LIKE SY-DATUM.
FORM GET_PAYROLL USING P_PERNR M_START M_END.
*This FM help us to get the Sequence number used for the
*employee on the payroll.
CALL FUNCTION 'CU_READ_RGDIR'
EXPORTING
PERSNR = P_PERNR
TABLES
IN_RGDIR = IN_RGDIR
EXCEPTIONS
NO_RECORD_FOUND = 1
OTHERS = 2.
*We read it using two dates, which corresponds to the month *we need
READ TABLE IN_RGDIR WITH KEY FPBEG = M_START
FPEND = M_END.
SEQNR = IN_RGDIR-SEQNR.
*This FM actually reads the payroll and get the information
*we need.
CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
EXPORTING
CLUSTERID = 'XX'
*In CLUSTERID use the country of your choice
EMPLOYEENUMBER = P_PERNR
SEQUENCENUMBER = SEQNR
READ_ONLY_INTERNATIONAL = 'X'
CHANGING
PAYROLL_RESULT = RESULT
EXCEPTIONS
ILLEGAL_ISOCODE_OR_CLUSTERID = 1
ERROR_GENERATING_IMPORT = 2
IMPORT_MISMATCH_ERROR = 3
SUBPOOL_DIR_FULL = 4
NO_READ_AUTHORITY = 5
NO_RECORD_FOUND = 6
VERSIONS_DO_NOT_MATCH = 7
OTHERS = 8.
*We just need to read the result table.
LOOP AT RESULT-INTER-RT INTO WA_RT.
CASE WA_RT-LGART.
WHEN '9010'.
MOVE WA_RT-BETRG TO T_ANYTABLE-SOMEPAY.
ENDCASE.
ENDLOOP.
ENDFORM. -
How to get Header in Downloaded .xls file using GUI_Download function
How to get Header in Downloaded .xls file using GUI_Download function ???
How to use the the Header parameter available in GUI_Download function .HI,
see this sample code..
data : Begin of t_header occurs 0,
name(30) type c,
end of t_header.
data : Begin of itab occurs 0,
fld1 type char10,
fld2 type char10,
fld3 type char10,
end of itab.
DATA: v_pass_path TYPE string.
append itab.
itab-fld1 = 'Hi'.
itab-fld2 = 'hello'.
itab-fld3 = 'welcome'.
append itab.
append itab.
append itab.
append itab.
append itab.
t_header-name = 'Field1'.
append t_header.
t_header-name = 'Field2'.
append t_header.
t_header-name = 'Field3'.
append t_header.
CALL FUNCTION 'GUI_FILE_SAVE_DIALOG'
EXPORTING
default_extension = 'XLS'
IMPORTING
fullpath = v_pass_path.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = v_pass_path
filetype = 'DBF'
TABLES
data_tab = itab
FIELDNAMES = t_header
Cheers,
jose. -
How to get field separator in flat file using GUI_DOWNLOAD function
hi,
how to get field separator in flat file using GUI_DOWNLOAD function.
thanking you.Hi,
Use WRITE_FIELD_SEPARATOR = 'X'.
Check this sample code
REPORT z_file_download.
DATA: w_name(90) TYPE c.
DATA:
BEGIN OF fs_flight,
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
price LIKE sflight-price,
currency LIKE sflight-currency,
END OF fs_flight.
DATA:
BEGIN OF fs_head,
carrid(10) TYPE c,
connid(10) TYPE c,
fldate(10) TYPE c,
price(10) TYPE c,
curr(10) TYPE c,
END OF fs_head.
DATA:
t_head LIKE
TABLE OF
fs_head.
DATA:
t_flight LIKE
TABLE OF
fs_flight.
fs_head-carrid = 'CARRID'.
fs_head-connid = 'CONNID'.
fs_head-fldate = 'FLDATE'.
fs_head-price = 'PRICE'.
fs_head-curr = 'CURRENCY'.
APPEND fs_head TO t_head.
SELECT-OPTIONS:
s_carrid FOR fs_flight-carrid.
START-OF-SELECTION.
SELECT carrid
connid
fldate
price
currency
FROM sflight
INTO TABLE t_flight
WHERE carrid IN s_carrid.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
filename = 'D:\flight.xls'
FILETYPE = 'ASC'
* APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
* DAT_MODE = ' '
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* IMPORTING
* FILELENGTH =
tables
data_tab = t_head
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'D:\flight.xls'
filetype = 'ASC'
append = 'X'
write_field_separator = 'X'
TABLES
data_tab = t_flight
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc EQ 0.
MESSAGE 'Download successful' TYPE 'I'.
ENDIF.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
I get an error message when I try to use the share function on iPhoto. When I try to share photos via email a triangle icon with an exclamation mark appears. Why can't I use share function?
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Error return immediately using GET pernr (PNP logical db)
I have a requirement to use HR PNP logical database for a report. The report should display the values from employee's infotypes. Should the user does not have authorisation on one or more infotype, the column field for that infotype should be left blank.
I tried using 'Get Pernr' but system will return error immediately that user does not have authorisation on any of the infotypes. Please advice how should I code my report in order to fit into my requirement.There is afunction module to disable the infotype authorization check ( do a wildcard search in se37 for 'HRINFAUTH* ).. call that before the Get Pernr event & implement explicit authzn checks in your program..
~Suresh -
Revision: 4634
Author: [email protected]
Date: 2009-01-22 17:38:56 -0800 (Thu, 22 Jan 2009)
Log Message:
First part of glue code for allowing Halo components to use the new Text Layout Framework, in order to get functionality such as bidirectional text.
Background:
TLF is making this possible by implementing a TLFTextField class. It is a Sprite that uses TLF to implement the same properties and methods as the legacy TextField class in the Player. Thanks to the createInFontContext() bottleneck method in UIComponent, it can be used by a properly-written Halo component (such as those in Flex 3) without any modifications to the component.
Note: Text should render similarly -- but is unlikely to render identically -- when a component uses TLFTextField vs. TextField. The width and height may be different, affecting layout; text could wrap differently; etc. This is a fact-of-life based on the fact that TLF/FTE and TextField are completely different text engines.
Whether a Halo component uses TLF or not to render text will be determined in Flex 4 by a new style, textFieldClass. (Gumbo components always use TLF.)
TLFTextField is currently only partially implemented. It does not yet support scrolling, selection, editing, multiple formats, or htmlText. Therefore it can only be used for simple display text, such as a Button label.
Details:
The TextStyles.as bucket 'o text styles now includes a non-inheriting textFieldClass style. It can be set to either mx.core.UITextField or mx.core.UITLFTextField. These are the Flex framework's wrapper classes around the lower-level classes flash.text.TextField (in the Player) and its TLF-based workalike, flashx.textLayout.controls.TLFTextField.
The global selector in defaults.css currently sets it to mx.core.UITextField using a ClassReference directive. For the time being, all Halo components will continue to use the "real" TextField.
The new UITLFTextField is a copy of UITextField, except that it extends TLFTextField instead of TextField. This class has been added to FrameworkClasses.as because no classes in framework.swc have a dependency on it. It will get soft-linked into applcations via the textFieldClass style.
The TLFTextField class currently lives in a fourth TLF SWC, textLayout_textField.swc. This SWC has been added to various build scripts. The external-library-path for building framework.swc now includes all four TLF SWCs, because UITLFTextField can't be compiled and linked without them. However, since they are external they aren't linked into framework.swc.
Properly-written Halo UIComponents access their text fields only through the IUITextField interface, and they create text fields like this:
textField = IUITextField(createInFontContext(UITextField));
(The reason for using createInFontContext() is to support embedded fonts that are embedded in a different SWF.)
The createInFontContext() method of UIComponent has been modified to use the textFieldClass style to determine whether to create a UITextField or a UITLFTextField.
With these changes, you can now write code like
to get two Buttons, the first of which uses UITextField (because this is the value of textFieldClass in the global selector) and the second of which uses UITLFTextField. They look very similar, which is good!
Currently, both Buttons are being measured by using an offscreen TextField. A subsequent checkin will make components rendering using UITLFTextField measure themselves using an offscreen TLFTextField so that measurement and rendering are consistent.
QE Notes: None
Doc Notes: None
Bugs: None
Reviewer: Deepa
Modified Paths:
flex/sdk/trunk/asdoc/build.xml
flex/sdk/trunk/build.xml
flex/sdk/trunk/frameworks/projects/framework/build.xml
flex/sdk/trunk/frameworks/projects/framework/defaults.css
flex/sdk/trunk/frameworks/projects/framework/src/FrameworkClasses.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/metadata/TextStyles.as
Added Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UITLFTextField.asMany of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down. -
How to pass dynamic selection to logical databse using ldb_process function
dear friends,
can anybode tell me how to pass dynamic selection to the logical database when i m using LDB_PROCESS function module. however, in EXPRESSIONS paramter of the function module i m passing the selecti-option, it is passing their also but when i used more than two select-option or paramter it throw an exception FREE_SELECTIONS_ERROR.
SO PLEASE GUIDE ME HOW TO PASS MORE THAN TWO SELECT-OPTION IN LOGICAL DATANSE DYNAMICALLY USING LDB_PROCESS.would be nice if you post the answer to all
-
I am using a web application that requires the use of the F7 key. Actually, to be more precise, I need the functionality that you would get on a PC if you hit Ctrl-F7 while in this web application in Firefox. I have changed the Mac's settings to allow standard use of the function keys (rather things like volume up/down, etc.) However, when I try to use Ctrl-F7 it appears to be using the function that is built into Firefox browser rather than the web application running within Firefox. (FYI, nothing happens when I try Cmd-F7 or Alt/Option-F7 either).
Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Get purchase order doc date using BAPI function module
Hi,
I have a .net windows application that uses BAPI_PO_GETDETAIL function module to get particular details of a PO in SAP. But i am not able to get the "Doc Date" for a particular PO. I am able to get all the details of items from the table "PO_ITEMS ". I used only 1 input parameter "PURCHASEORDER".
Please help me to get this thing done
.netframework : 4.0
Language: C#
Visual Studio: vs 2010
Regards,
Manosh JacobAbsolutely hynek petrak..
Manosh Jacob You can go with the above technique. -
Use SQL function to get the original order number using the invoice number
Hi All,
wondering is someone can help me with this challenge I am having? Often I need to return the original order numbers that created the resulting invoce. This is a relatively simple seriese of joins in a query but I am wanting to simplify it using a SQL function that can be referenced each time easily from with in the SELECT statement. the code i currently have is:
Use SQL function to get the original order number using the invoice number
CREATE FUNCTION dbo.fnOrdersThatMakeInvoice(@InvNum int)
RETURNS nvarchar(200)
AS
BEGIN
DECLARE @OrderList nvarchar(200)
SET @OrderList = ''
SELECT @OrderList = @OrderList + (cast(T6.DocNum AS nvarchar(10)) + ' ')
FROM OINV AS T1 INNER JOIN
INV1 AS T2 ON T1.DocEntry = T2.DocEntry INNER JOIN
DLN1 AS T4 ON T2.BaseEntry = T4.DocEntry AND T2.BaseLine = T4.LineNum INNER JOIN
RDR1 AS T5 ON T4.BaseEntry = T5.DocEntry AND T4.BaseLine = T5.LineNum INNER JOIN
ORDR AS T6 ON T5.DocEntry = T6.DocEntry
WHERE T1.DocNum = @InvNum
RETURN @OrderList
END
it is run by the following query:
Select T1.DocNum, dbo.fnOrdersThatMakeInvoice(T1.DocNum)
From OINV T1
Where T1.DocNum = 'your invoice number here'
The issue is that this returns the order number for all of the lines in the invoice. Only want to see the summary of the order numbers. ie if 3 orders were used to make a 20 line inovice I only want to see the 3 order numbers retuned in the field.
If this was a simple reporting SELECT query I would use SELECT DISTINCT. But I can't do that.
Any ideas?
Thanks,
MikeThanks Gordon,
I am trying to get away from the massive table access list everytime I write a query where I need to access the original order number of the invoice. However, I have managed to solve my own problem with a GROUP BY statement!
Others may be interested so, the code is this:
CREATE FUNCTION dbo.fnOrdersThatMakeInvoice(@InvNum int)
RETURNS nvarchar(200)
AS
BEGIN
DECLARE @OrderList nvarchar(200)
SET @OrderList = ''
SELECT @OrderList = @OrderList + (cast(T6.DocNum AS nvarchar(10)) + ' ')
FROM OINV AS T1 INNER JOIN
INV1 AS T2 ON T1.DocEntry = T2.DocEntry INNER JOIN
DLN1 AS T4 ON T2.BaseEntry = T4.DocEntry AND T2.BaseLine = T4.LineNum INNER JOIN
RDR1 AS T5 ON T4.BaseEntry = T5.DocEntry AND T4.BaseLine = T5.LineNum INNER JOIN
ORDR AS T6 ON T5.DocEntry = T6.DocEntry
WHERE T1.DocNum = @InvNum
GROUP BY T6.DocNum
RETURN @OrderList
END
and to call it use this:
Select T1.DocNum, dbo.fnOrdersThatMakeInvoice(T1.DocNum)
From OINV T1
Where T1.DocNum = 'your invoice number' -
Authentication syntax for HTTP GET method using TCP functions in Labview on linux
Hi,
Currently, I am trying to communicate to web server. I have Labview installed on a Linux machine. The HTTP function blocks and other labview functions do not work. Hence, I am building a HTTP code string using TCP functions (port 80) to talk to the web server. I am successfully able to fetch a response from web sites (example www.ni.com) from my vi. However, when I try to communicate to my web server, it does not work. It requires an authentication. I am able to open http://ipaddress in my browser from my machine using username and password. Can someone help with Authentication string requirement for GET method?
so far the string is:
GET /index/ HTTP/1.1
Host: http://xx.xx.xx.xxAn easy option would be to try http://userassword@server syntax for the URL.
Else I posted a Twitter fetcher once (won't work anymore since Twitter moved to Oauth authentication) at LAVA. Based on code from @cloew.
The code is part of this LLB.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Maybe you are looking for
-
Unable to erase external hard drive with Disk Utility
Macbook Pro (mid 2010) running 10.9 Hello Recently, my Seagate FreeAgent GoFlex 1 TB external hard drive has not been showing up on my desktop or in finder. The light is on when connected, and in the Disk Utility it appears. 1. It was naturally cr
-
I re-installed i-tunes but this didn't solve the issue. Other iPods including additional 5th generation nanos connect and sync just fine. When it's plugged into the computer, it says "Connected...Eject before disconnecting" but doesn't show in itun
-
G4 Powerbook Hard Drive Problem - PLEASE HELP!!
I have a powerbook G4 15 inch alu. It is running OSX version 10.4.11 My system profiler tells me I have a 74.5GB hard drive with 69.34GB used, but I had wiped the HD in September 2008 and reinstalled the OS and few other programmes and files, so this
-
Is it possible to work with Field Exits in R/3 Enterp. Basis 6.20???
How could I work with them?
-
What is default(1).aspx and why is it preventing me from accessing hotmail account?
After I enter my username and password at hotmail.com sign in, I recieve a message saying 'default(1).aspx is missing and it tries to download. Then an error saying it cannot read file. Sometimes I can access mail but mostly not.