Logical Server NOT applying archives

Grid Control is showing all working fine, checked the configuration it show everything is fine. Logical server is receiving all the logs, but not applying. Can anyone tell WHY???
Thanks

Is logical server the standby server???. If yes, then is recovery managed cancelled.If so, then alter database recover managed standby database discconect from session; will start applying the archives automatically.
Anand

Similar Messages

My Active dataguard is not applying archives.

Dears,
Following is my setup
=====================
Primary:
prod on RAC with 2 nodes
Database : Oracle 11.2.0.3
OS OEL 5.7
storage : ASM
+DATADG
+FLASHDG
Standby:
sync on single node
Database : Oracle 11.2.0.3
storage : ASM
+DATADG
+FLASHDG
I've configured Active dataguard successfully and was able to apply archivelogs successfully instantly.
Archive log locations are +FLASHDG/prod/ARCHIVELOG/ AND /u02/arch --- on primary
Archive log locations are +FLASHDG/stby/ARCHIVELOG/ AND /u02/arch --- on standby
On Standby
===========
SQL> select 'Using Active Data Guard' ADG from v$managed_standby m,v$database d where m.process like 'MRP%' ;
ADG
Using Active Data Guard
SQL> select open_mode,database_role,PROTECTION_MODE,PROTECTION_LEVEL from v$database;
OPEN_MODE DATABASE_ROLE PROTECTION_MODE PROTECTION_LEVEL
READ ONLY WITH APPLY PHYSICAL STANDBY MAXIMUM PERFORMANCE MAXIMUM PERFORMANCE
SQL>
Upto now everything is ok, means same data is sync on primary and standby. As my archive location was getting full, i've used this SQL query to clean them
SELECT 'alter diskgroup '||dg.name||' drop file
''+'||dg.name||''||SYS_CONNECT_BY_PATH(al.name,'/')||''';'
FROM v$asm_alias al, v$asm_file fi, v$asm_diskgroup dg
WHERE al.file_number = fi.file_number(+)
AND al.group_number = dg.group_number
AND fi.type = 'ARCHIVELOG'
START WITH alias_index = 0
CONNECT BY PRIOR al.reference_index = al.parent_index;
SELECT 'alter diskgroup '||dg.name||' drop file
''+'||dg.name||''||SYS_CONNECT_BY_PATH(al.name,'/')||''';'
FROM v$asm_alias al, v$asm_file fi, v$asm_diskgroup dg
WHERE al.file_number = fi.file_number(+)
AND al.group_number = dg.group_number
AND fi.type = 'BACKUPSET'
START WITH alias_index = 0
CONNECT BY PRIOR al.reference_index = al.parent_index;
In order to delete ARCHIVE logs which are stored in ASM FLASHDG, which will have a type of "ARCHIVELOG" and "BACKUPSET" i've used this above two queries.
After performing this steps , my Active dataguard is not applying archives.
On the primary server, check the latest archived redo log
SELECT sequence#, first_time, next_time
FROM v$archived_log
ORDER BY sequence#;
2809 16-APR-13 16-APR-13
2809 16-APR-13 16-APR-13
2809 16-APR-13 16-APR-13
2810 16-APR-13 16-APR-13
2810 16-APR-13 16-APR-13
2810 16-APR-13 16-APR-13
2811 16-APR-13 16-APR-13
2811 16-APR-13 16-APR-13
2811 16-APR-13 16-APR-13
2812 16-APR-13 16-APR-13
2812 16-APR-13 16-APR-13
2812 16-APR-13 16-APR-13
2813 16-APR-13 16-APR-13
2813 16-APR-13 16-APR-13
2814 16-APR-13 16-APR-13
2814 16-APR-13 16-APR-13
2815 16-APR-13 16-APR-13
2815 16-APR-13 16-APR-13
2816 16-APR-13 16-APR-13
2816 16-APR-13 16-APR-13
2817 16-APR-13 16-APR-13
2817 16-APR-13 16-APR-13
2818 16-APR-13 16-APR-13
2818 16-APR-13 16-APR-13
2819 16-APR-13 16-APR-13
2819 16-APR-13 16-APR-13
2820 16-APR-13 16-APR-13
2820 16-APR-13 16-APR-13
2821 16-APR-13 16-APR-13
2821 16-APR-13 16-APR-13
2822 16-APR-13 16-APR-13
2822 16-APR-13 16-APR-13
2823 16-APR-13 16-APR-13
2823 16-APR-13 16-APR-13
2824 16-APR-13 16-APR-13
2824 16-APR-13 16-APR-13
2825 16-APR-13 16-APR-13
2825 16-APR-13 16-APR-13
2826 16-APR-13 16-APR-13
2826 16-APR-13 16-APR-13
2827 16-APR-13 16-APR-13
2827 16-APR-13 16-APR-13
2828 16-APR-13 16-APR-13
2828 16-APR-13 16-APR-13
2829 16-APR-13 16-APR-13
2829 16-APR-13 16-APR-13
2830 16-APR-13 16-APR-13
2830 16-APR-13 16-APR-13
2831 16-APR-13 16-APR-13
2831 16-APR-13 16-APR-13
2832 16-APR-13 16-APR-13
2832 16-APR-13 16-APR-13
2833 16-APR-13 16-APR-13
2833 16-APR-13 16-APR-13
2834 16-APR-13 16-APR-13
2834 16-APR-13 16-APR-13
2835 16-APR-13 16-APR-13
2835 16-APR-13 16-APR-13
2836 16-APR-13 16-APR-13
2836 16-APR-13 16-APR-13
2837 16-APR-13 16-APR-13
2837 16-APR-13 16-APR-13
2838 16-APR-13 16-APR-13
2838 16-APR-13 16-APR-13
2839 16-APR-13 16-APR-13
2839 16-APR-13 16-APR-13
2840 16-APR-13 16-APR-13
2840 16-APR-13 16-APR-13
2841 16-APR-13 16-APR-13
2841 16-APR-13 16-APR-13
2842 16-APR-13 16-APR-13
2842 16-APR-13 16-APR-13
2843 16-APR-13 16-APR-13
2843 16-APR-13 16-APR-13
2844 16-APR-13 16-APR-13
2844 16-APR-13 16-APR-13
2845 16-APR-13 16-APR-13
2845 16-APR-13 16-APR-13
2846 16-APR-13 16-APR-13
2846 16-APR-13 16-APR-13
Check the new archived redo log has arrived at the standby server and been applied.
SELECT sequence#, first_time, next_time, applied
FROM v$archived_log
ORDER BY sequence#;
2801 15-APR-13 15-APR-13 YES
2801 15-APR-13 15-APR-13 YES
2802 15-APR-13 15-APR-13 YES
2802 15-APR-13 15-APR-13 YES
2803 15-APR-13 15-APR-13 YES
2803 15-APR-13 15-APR-13 YES
2804 15-APR-13 15-APR-13 YES
2804 15-APR-13 15-APR-13 YES
2805 15-APR-13 15-APR-13 YES
2805 15-APR-13 15-APR-13 YES
2806 15-APR-13 15-APR-13 YES
2806 15-APR-13 15-APR-13 YES
2807 15-APR-13 15-APR-13 YES
2807 15-APR-13 15-APR-13 YES
2808 15-APR-13 16-APR-13 YES
2808 15-APR-13 16-APR-13 YES
2809 16-APR-13 16-APR-13 YES
2809 16-APR-13 16-APR-13 YES
2810 16-APR-13 16-APR-13 YES
2810 16-APR-13 16-APR-13 YES
2811 16-APR-13 16-APR-13 YES
2811 16-APR-13 16-APR-13 YES
2812 16-APR-13 16-APR-13 IN-MEMORY
2812 16-APR-13 16-APR-13 YES
So could anyone help me to resolve this issue. Anticipating your response at the earliest.
Regards,
VIKHAR
Edited by: VIKHARAHMED on Apr 16, 2013 9:38 AM

Here is the alert log file
Media Recovery Log +FLASHDG/stby/archivelog/2013_04_16/thread_2_seq_1476.1987.812900733
Tue Apr 16 18:56:42 2013
Primary database is in MAXIMUM PERFORMANCE mode
RFS[1]: Assigned to RFS process 16803
RFS[1]: Selected log 12 for thread 2 sequence 1485 dbid 220323208 branch 808484882
Tue Apr 16 18:56:42 2013
RFS[2]: Assigned to RFS process 16807
RFS[2]: Opened log for thread 2 sequence 1484 dbid 220323208 branch 808484882
Archived Log entry 6324 added for thread 2 sequence 1484 rlc 808484882 ID 0xd21a288 dest 10:
Tue Apr 16 19:09:02 2013
RFS[1]: Selected log 11 for thread 2 sequence 1486 dbid 220323208 branch 808484882
Tue Apr 16 19:09:02 2013
Archived Log entry 6325 added for thread 2 sequence 1485 ID 0xd21a288 dest 1:
Archived Log entry 6326 added for thread 2 sequence 1485 ID 0xd21a288 dest 2:
Tue Apr 16 19:12:23 2013
RFS[1]: Selected log 12 for thread 2 sequence 1487 dbid 220323208 branch 808484882
Tue Apr 16 19:12:23 2013
Archived Log entry 6327 added for thread 2 sequence 1486 ID 0xd21a288 dest 1:
Archived Log entry 6328 added for thread 2 sequence 1486 ID 0xd21a288 dest 2:
Tue Apr 16 19:14:41 2013
"alert_stby.log" 845L, 33990C 782,1 94%
Tue Apr 16 19:17:27 2013
Archived Log entry 6331 added for thread 2 sequence 1488 ID 0xd21a288 dest 1:
Archived Log entry 6332 added for thread 2 sequence 1488 ID 0xd21a288 dest 2:
Tue Apr 16 19:25:51 2013
RFS[1]: Selected log 11 for thread 2 sequence 1490 dbid 220323208 branch 808484882
Tue Apr 16 19:25:51 2013
Archived Log entry 6333 added for thread 2 sequence 1489 ID 0xd21a288 dest 1:
Archived Log entry 6334 added for thread 2 sequence 1489 ID 0xd21a288 dest 2:
Tue Apr 16 19:51:02 2013
RFS[1]: Selected log 12 for thread 2 sequence 1491 dbid 220323208 branch 808484882
Tue Apr 16 19:51:02 2013
Archived Log entry 6335 added for thread 2 sequence 1490 ID 0xd21a288 dest 1:
Archived Log entry 6336 added for thread 2 sequence 1490 ID 0xd21a288 dest 2:
Tue Apr 16 20:37:12 2013
RFS[1]: Selected log 11 for thread 2 sequence 1492 dbid 220323208 branch 808484882
Tue Apr 16 20:37:12 2013
Archived Log entry 6337 added for thread 2 sequence 1491 ID 0xd21a288 dest 1:
Archived Log entry 6338 added for thread 2 sequence 1491 ID 0xd21a288 dest 2:
Tue Apr 16 21:08:23 2013
RFS[1]: Selected log 12 for thread 2 sequence 1493 dbid 220323208 branch 808484882
Tue Apr 16 21:08:23 2013
Archived Log entry 6339 added for thread 2 sequence 1492 ID 0xd21a288 dest 1:
Archived Log entry 6340 added for thread 2 sequence 1492 ID 0xd21a288 dest 2:
Tue Apr 16 22:16:06 2013
RFS[1]: Selected log 11 for thread 2 sequence 1494 dbid 220323208 branch 808484882
Tue Apr 16 22:16:06 2013
Archived Log entry 6341 added for thread 2 sequence 1493 ID 0xd21a288 dest 1:
Archived Log entry 6342 added for thread 2 sequence 1493 ID 0xd21a288 dest 2:
Tue Apr 16 22:31:46 2013
RFS[1]: Selected log 12 for thread 2 sequence 1495 dbid 220323208 branch 808484882
Tue Apr 16 22:31:46 2013
Archived Log entry 6343 added for thread 2 sequence 1494 ID 0xd21a288 dest 1:
Archived Log entry 6344 added for thread 2 sequence 1494 ID 0xd21a288 dest 2:
Wed Apr 17 09:31:59 2013
RFS[1]: Selected log 11 for thread 2 sequence 1496 dbid 220323208 branch 808484882
Wed Apr 17 09:32:00 2013
Archived Log entry 6345 added for thread 2 sequence 1495 ID 0xd21a288 dest 1:
Archived Log entry 6346 added for thread 2 sequence 1495 ID 0xd21a288 dest 2:

New standby not applying archive log

I have just created standby database....but its not applying archive log...
when I checked the alerlog file of standby....
ora-19527 physical standby redo log must be renamed

yes, I have created at onlien redo logs at standby database..
what is test and test?
i saw one command like this...
log_file_name_convert= ((''/u01/oradata/prod'', ''/u01/oradata/standby''),(''/u02/oradata/prod'', ''/u02/oradata/standby''))
My Primary DB name is OraclePM
My Standby DB name is OracleDR
I have placed all redo logs in direcrtory (D:\oracle\product\logs\ ) the directory structure for both databases is same... I have created 3 additionals redo logs at standby database...
How can I edit my standby init file...

Standby do not applied archives

Hi,
Please help me any one,
am facing the below problem,
Errors in file /oracle/admin/marvlstd/bdump/marvlstd_mrp0_28273.trc:
ORA-12801: error signaled in parallel query server P000
ORA-00600: internal error code, arguments: [3020], [90], [573443], [378060803], [], [], [], []
ORA-10567: Redo is inconsistent with data block (file# 90, block# 573443)
ORA-10564: tablespace USERS
ORA-01110: data file 90: '+DA
when am started MRP above error to be occurred how to solve the issue in statdby
i have restarted asm and DB its fine but archives not applied,
once i put the below command facing the above problem.
alter database recover managed standby database disconnect from session;
Thanks
Gopi G

Hi,
please check following link: ORA-10567: Redo is inconsistent with data block (file# 124, block# 214081) &laquo; Hendry&#039;s &quot;Oracl…
Thank you

2012 R2 - One server not applying two updates. Lists AD / SYSVOL Version Mismatch

So we have a bunch of servers running 2012 R2. On 1 or 2 of them I have a certain GPO that isn't applying. The specific one I'm having trouble with is our SNMP settings. The base settings applied but then we updated the GPO to add in an
additional IP address. Most servers pulled it down fine but 1 or 2 did not. Tried gpupdate /force and normal things and just can't get it to apply.
I can the gpresult /h and in the html file it says:
The following GPOs have special alerts
Default Domain Policy - AD / SYSVOL Version Mismatch
SNMP - AD / SYSVOL Version Mismatch
The only info I found on that error talks about a particular patch but we already have that patch installed. The change was put in over a week ago and is still not flowing to just these specific machines.
Anyone have any idea how I can figure out what the problem is? They are production machines so I can't reboot them until Saturday night when we are scheduled to do the Feb Patches anyway. I don't know if that will help or not so if there's something
else I can check in the meantime, that'd be great.
Thanks!

Quick note on this issue:
I was running RSOP against a user and server other than the local server, and the error would not go away, I tried installing the patches and rollups on the DC I was seeing the error on. Since these were already installed I tried installing
them from the stand alone download.
They complained about already being installed, so I was relegated to doing more research.
After some time, and while chasing a separate issue on the other server, I noticed that the updates on THAT SERVER were not up to date. I ran into issues updating due to corruption (another story altogether), but with the help of Microsoft Support,
I was able to get THAT SERVER updated.
I went back to troubleshooting the AD / Sysvol error, starting from scratch...trying to install the patches that were already installed...etc.
Just for grins and giggles, I re-ran the RSOP against the original user and the other server and viola, the error is gone.
Longer story than it needed to be, I know, but this leads me to believe that the error is NOT on the DC to DC but an issue with the server your running RSOP against. I am not positive that this is actually the case, but this may help someone out.
So if anyone can test and/or verify this please post.
Supreme executive power is derived from a mandate from the masses, not from some farcical aquatic ceremony. -- Dennis the peasant Les Waggoner WCC Internet Technologies

How to apply archive in Standby Database?

Hello,
My Database are running in linux plateform. I am seeing that archives which are generating are not copying to standby server & not applying.
Can anybody suggest me how to copy archive from primary database(ASM file system) to standby Database & apply those archives?
Thanks

Hi,
I am having similar problem. The primary logs are shipping on to standby but are not getting applied.
Here are the outputs:
From primary
SQL > select thread#,max(sequence#) from v$archived_log where archived='YES' group by thread#;
THREAD# MAX(SEQUENCE#)
1 27908
2 28476
3 31643
select max(sequence#) from gv$archived_log;
MAX(SEQUENCE#)
31643
From Standby
SQL > select thread#,max(sequence#) from v$archived_log where applied ='YES' group by thread#;
THREAD# MAX(SEQUENCE#)
1 26862
2 27580
3 30874
select max(sequence#) from v$archived_log;
MAX(SEQUENCE#)
31643
Any help is appreciated.
Thanks in advance.

Archive logs not applied on logical database.

I have 10.2.04 oracle logical dataguard on windows:
The logs are trasported smoothly from primary to stanby;
But they are not applied to the logical standby;
There are no GAPS.
This is the message i got from DG broker wehn i ran verify configuration
Initializing
Connected to instance I-AG1101:tito
Starting alert log monitor...
Updating Data Guard link on database homepage...
Data Protection Settings:
Protection mode : Maximum Performance
Redo Transport Mode settings:
hclistg: ASYNC
hclidg: ASYNC
Checking standby redo log files.....OK
Checking Data Guard status
hclistg : Normal
hclidg : Normal
Checking Inconsistent Properties
Checking agent status
hclistg ... OK
hclidg ... WARNING: No credentials available for target. I-SAG1151
Attempting agent ping ... OK
Switching log file 420.Done
Checking applied log on hclidg.......WARNING:
Timed out after 60 seconds waiting for log to be applied.
Processing completed.
This is the results of query: SELECT SEQUENCE#, FIRST_TIME, APPLIED
FROM DBA_LOGSTDBY_LOG
ORDER BY SEQUENCE#;
SEQUENCE#|FIRST_TIME|APPLIED
391|3/31/2010 1:08:27 PM|CURRENT
392|3/31/2010 3:10:19 PM|NO
393|3/31/2010 3:47:05 PM|NO
394|3/31/2010 3:47:13 PM|NO
395|3/31/2010 3:47:40 PM|NO
396|3/31/2010 3:47:46 PM|NO
397|3/31/2010 3:50:14 PM|NO
398|3/31/2010 3:50:20 PM|NO
399|3/31/2010 3:54:01 PM|NO
400|3/31/2010 3:54:36 PM|NO
401|3/31/2010 3:54:43 PM|NO
402|3/31/2010 3:56:24 PM|NO
403|3/31/2010 3:56:30 PM|NO
404|3/31/2010 4:00:46 PM|NO
405|3/31/2010 4:34:03 PM|NO
406|3/31/2010 4:35:31 PM|NO
407|3/31/2010 5:38:57 PM|NO
408|4/1/2010 7:30:25 AM|NO
409|4/1/2010 11:45:23 AM|NO
410|4/1/2010 11:47:06 AM|NO
411|4/1/2010 2:26:25 PM|NO
412|4/1/2010 2:26:43 PM|NO
413|4/1/2010 2:26:44 PM|NO
414|4/1/2010 2:28:13 PM|NO
415|4/1/2010 5:08:12 PM|NO
416|4/1/2010 5:08:19 PM|NO
417|4/1/2010 5:08:52 PM|NO
418|4/2/2010 10:31:19 AM|NO
419|4/2/2010 10:35:06 AM|NO
420|4/2/2010 11:24:27 AM|NO
Please help,,,

i am getting this error when i run alter database mount standby database
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup nomount;
ORACLE instance started.
Total System Global Area 1610612736 bytes
Fixed Size 1299288 bytes
Variable Size 545262760 bytes
Database Buffers 1056964608 bytes
Redo Buffers 7086080 bytes
SQL> alter database mount standby database;
alter database mount standby database
ERROR at line 1:
ORA-01665: control file is not a standby control file
I configured my logical DG using Grid control

Redo data not applied on logical standby database 10g

after a network problem within the primary and the logical standby database. The redo data is not applied on the logical standby even if all the archived log are sent to it.
The below is the output from v$archive_gap and DBA_LOGSTDBY_LOG
SQL> select * from v$archive_gap;
no rows selected
SQL> SELECT SEQUENCE#, FIRST_TIME, APPLIED
FROM DBA_LOGSTDBY_LOG
ORDER BY SEQUENCE#; 2 3
SEQUENCE# FIRST_TIME APPLIED
3937 24-FEB-10 01:48:23 CURRENT
3938 24-FEB-10 10:31:22 NO
3939 24-FEB-10 10:31:29 NO
3940 24-FEB-10 10:31:31 NO
3941 24-FEB-10 10:33:44 NO
3942 24-FEB-10 11:54:17 NO
3943 24-FEB-10 12:05:30 NO
Any help?
Thanks

ORA-00600: internal error code, arguments: [krvxgirp], [], [], [], [], [], [], []
LOGSTDBY Analyzer process P003 pid=48 OS id=8659 stopped
Wed Feb 24 16:49:04 2010
Errors in file /oracle/product/10.2.0/admin/umarket/bdump/oradb_lsp0_8651.trc:
ORA-12801: error signaled in parallel query server P003
ORA-00600: internal error code, arguments: [krvxgirp], [], [], [], [], [], [], []
and below an Warning: Apply error received: ORA-26714: User error encountered while applying. Clearing. from oradb_lsp0_8651.trc
Thanks

Archive Logs NOT APPLIED but transferred

Hi Gurus,
I have configured Primary & Standby databases in same Oracle Home. OS version is OEL 5. Database version is 10.2.0.1. I could get the archive logs in the standby site but they are not getting applied in the standby database. I don't have OLAP installed in my database version. Would this create this issue? However I attached my primary alert log details below for your reference:
Thu Aug 30 23:55:37 2012
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
sga_target = 289406976
control_files = /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim/control01.ctl, /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim/control02.ctl, /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim/control03.ctl
db_file_name_convert = /home/oracle/oracle/product/10.2.0/db_1/oradata/newstand, /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim
log_file_name_convert = /home/oracle/oracle/product/10.2.0/db_1/oradata/newstand, /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim, /home/oracle/oracle/product/10.2.0/db_1/flash_recovery_area/NEWSTAND/onlinelog, /home/oracle/oracle/product/10.2.0/db_1/flash_recovery_area/NEWPRIM/onlinelog
db_block_size = 8192
compatible = 10.2.0.1.0
log_archive_config = DG_CONFIG=(newprim,newstand)
log_archive_dest_1 = LOCATION=/home/oracle/oracle/product/10.2.0/db_1/oradata/newprim/arch/
VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=newprim
log_archive_dest_2 = SERVICE=newstand LGWR ASYNC VALID_FOR=(online_logfiles,primary_role) DB_UNIQUE_NAME=newstand
log_archive_dest_state_1 = enable
log_archive_dest_state_2 = enable
log_archive_max_processes= 30
log_archive_format = %t_%s_%r.dbf
fal_client = newprim
fal_server = newstand
db_file_multiblock_read_count= 16
db_recovery_file_dest = /home/oracle/oracle/product/10.2.0/db_1/flash_recovery_area
db_recovery_file_dest_size= 2147483648
standby_file_management = AUTO
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=newprimXDB)
job_queue_processes = 10
background_dump_dest = /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/bdump
user_dump_dest = /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/udump
core_dump_dest = /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/cdump
audit_file_dest = /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/adump
db_name = newprim
db_unique_name = newprim
open_cursors = 300
pga_aggregate_target = 95420416
PMON started with pid=2, OS id=28091
PSP0 started with pid=3, OS id=28093
MMAN started with pid=4, OS id=28095
DBW0 started with pid=5, OS id=28097
LGWR started with pid=6, OS id=28100
CKPT started with pid=7, OS id=28102
SMON started with pid=8, OS id=28104
RECO started with pid=9, OS id=28106
CJQ0 started with pid=10, OS id=28108
MMON started with pid=11, OS id=28110
MMNL started with pid=12, OS id=28112
Thu Aug 30 23:55:38 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Thu Aug 30 23:55:38 2012
ALTER DATABASE MOUNT
Thu Aug 30 23:55:42 2012
Setting recovery target incarnation to 2
Thu Aug 30 23:55:43 2012
Successful mount of redo thread 1, with mount id 1090395834
Thu Aug 30 23:55:43 2012
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Thu Aug 30 23:55:43 2012
ALTER DATABASE OPEN
Thu Aug 30 23:55:43 2012
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=16, OS id=28122
ARC1 started with pid=17, OS id=28124
ARC2 started with pid=18, OS id=28126
ARC3 started with pid=19, OS id=28128
ARC4 started with pid=20, OS id=28133
ARC5 started with pid=21, OS id=28135
ARC6 started with pid=22, OS id=28137
ARC7 started with pid=23, OS id=28139
ARC8 started with pid=24, OS id=28141
ARC9 started with pid=25, OS id=28143
ARCa started with pid=26, OS id=28145
ARCb started with pid=27, OS id=28147
ARCc started with pid=28, OS id=28149
ARCd started with pid=29, OS id=28151
ARCe started with pid=30, OS id=28153
ARCf started with pid=31, OS id=28155
ARCg started with pid=32, OS id=28157
ARCh started with pid=33, OS id=28159
ARCi started with pid=34, OS id=28161
ARCj started with pid=35, OS id=28163
ARCk started with pid=36, OS id=28165
ARCl started with pid=37, OS id=28167
ARCm started with pid=38, OS id=28169
ARCn started with pid=39, OS id=28171
ARCo started with pid=40, OS id=28173
ARCp started with pid=41, OS id=28175
ARCq started with pid=42, OS id=28177
ARCr started with pid=43, OS id=28179
ARCs started with pid=44, OS id=28181
Thu Aug 30 23:55:44 2012
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARCt started with pid=45, OS id=28183
LNS1 started with pid=46, OS id=28185
Thu Aug 30 23:55:48 2012
Thread 1 advanced to log sequence 68
Thu Aug 30 23:55:48 2012
ARCo: Becoming the 'no FAL' ARCH
ARCo: Becoming the 'no SRL' ARCH
Thu Aug 30 23:55:48 2012
ARCp: Becoming the heartbeat ARCH
Thu Aug 30 23:55:48 2012
Thread 1 opened at log sequence 68
Current log# 1 seq# 68 mem# 0: /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim/redo01.log
Successful open of redo thread 1
Thu Aug 30 23:55:48 2012
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Thu Aug 30 23:55:48 2012
SMON: enabling cache recovery
Thu Aug 30 23:55:48 2012
Successfully onlined Undo Tablespace 1.
Thu Aug 30 23:55:48 2012
SMON: enabling tx recovery
Thu Aug 30 23:55:49 2012
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=47, OS id=28205
Thu Aug 30 23:55:49 2012
Error 1034 received logging on to the standby
Thu Aug 30 23:55:49 2012
Errors in file /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/bdump/newprim_arc1_28124.trc:
ORA-01034: ORACLE not available
FAL[server, ARC1]: Error 1034 creating remote archivelog file 'newstand'
FAL[server, ARC1]: FAL archive failed, see trace file.
Thu Aug 30 23:55:49 2012
Errors in file /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/bdump/newprim_arc1_28124.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
Thu Aug 30 23:55:49 2012
ORACLE Instance newprim - Archival Error. Archiver continuing.
Thu Aug 30 23:55:49 2012
db_recovery_file_dest_size of 2048 MB is 9.77% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Thu Aug 30 23:55:50 2012
Errors in file /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/udump/newprim_ora_28120.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15
Thu Aug 30 23:55:50 2012
Completed: ALTER DATABASE OPEN
Thu Aug 30 23:56:33 2012
FAL[server]: Fail to queue the whole FAL gap
GAP - thread 1 sequence 1-33
DBID 1090398314 branch 792689455
Kindly, guide me please..
-Vimal.

CKPT: The trace file details are added below for your reference;
/home/oracle/oracle/product/10.2.0/db_1/admin/newprim/bdump/newprim_arc1_28124.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning and Data Mining options
ORACLE_HOME = /home/oracle/oracle/product/10.2.0/db_1
System name:     Linux
Node name:     localhost.localdomain
Release:     2.6.18-8.el5PAE
Version:     #1 SMP Tue Jun 5 23:39:57 EDT 2007
Machine:     i686
Instance name: newprim
Redo thread mounted by this instance: 1
Oracle process number: 17
Unix process pid: 28124, image: [email protected] (ARC1)
*** SERVICE NAME:() 2012-08-30 23:55:48.314
*** SESSION ID:(155.1) 2012-08-30 23:55:48.314
kcrrwkx: nothing to do (start)
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1034 and errmsg is 'ORA-01034: ORACLE not available
*** 2012-08-30 23:55:49.723 60679 kcrr.c
Error 1034 received logging on to the standby
Error 1034 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'newstand'
Error 1034 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'newstand'
ORA-01034: ORACLE not available
*** 2012-08-30 23:55:49.723 58941 kcrr.c
kcrrfail: dest:2 err:1034 force:0 blast:1
kcrrwkx: unknown error:1034
ORA-16055: FAL request rejected
ARCH: Connecting to console port...
ARCH: Connecting to console port...
kcrrwkx: nothing to do (end)
*** 2012-08-31 00:00:43.417
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:05:43.348
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:10:43.280
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:15:43.217
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:20:43.160
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:25:43.092
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:30:43.031
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:35:42.961
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:40:42.890
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:45:42.820
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:50:42.755
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:55:42.686
kcrrwkx: nothing to do (start)
*** 2012-08-31 01:00:42.631
kcrrwkx: nothing to do (start)
*** 2012-08-31 01:05:42.565
kcrrwkx: nothing to do (start)
*** 2012-08-31 01:10:42.496
kcrrwkx: nothing to do (start)
Mahir: Yes I have my 4 standby redo logs!
I created the standby manually without using RMAN.
Hemant: if it asks for even first thread, then obviously it shows nothing is applied on Standby. By the way so it is not called a 'GAP', I think..!
Thanks.

I have one problem with Data Guard. My archive log files are not applied.

I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!

Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap

Data Guard. My archive log files are not applied.

I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!

Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap

Could u tell me last applyed archive log in disaster recovery server

Hi DBA'S,
we are using oracle 9.2.0.8 my production database has dr(our dr is not a stand by it is created in diff way) server every time one cron job sync the database and transfer the new logs from production server to dr server. i want to know last applied archive in dr server.
i am using this query select max(sequence#) from v$log_history; it is showing same results in boath production and dr when ever we backup 2 days before archive to some backup directory sync is going to fail
please tell me correct query to find out the last applied archived log in dr server
Thanks&Regards
Tirupathi

we are using oracle 9.2.0.8 my production database has dr(our dr is not a stand by it is created in diff way) server every time one cron job sync the database and transfer the new logs from production server to dr server. i want to know last applied archive in dr server.i am using this query select max(sequence#) from v$log_history; it is showing same results in boath production and dr when ever we backup 2 days before archive to some backup directory sync is going to fail
please tell me correct query to find out the last applied archived log in dr server>
As you are running cron job to bring the dr in sync, i suppose v$log_history might give you the wrong results.In your case check :-
select sequence#,applied from v$archived_log where applied='YES';
select max(sequence#) from v$archived_log where applied='YES';Would like to know, why manual recovery (archive logs being manually applied) is being performed, and not automatic.
In case you switch to automatic below query would be useful :-
select al.thrd "Thread", almax "Last Seq Received", lhmax "Last Seq Applied"
    from (select thread# thrd, max(sequence#) almax
            from v$archived_log
           where resetlogs_change#=(select resetlogs_change# from v$database)
           group by thread#) al,
         (select thread# thrd, max(sequence#) lhmax
           from v$log_history
            where first_time=(select max(first_time) from v$log_history)
           group by thread#) lh
          where al.thrd = lh.thrd;Refer [http://aprakash.wordpress.com/2010/07/21/use-of-varchived_log-and-vlog_history-on-physical-standby/]
HTH
Anand

Servlet class not found error deploying a WAR on Web Logic Server 8.1

I'm re-deploying an updated web application to a web logic server, but when I navigate to the login page of the web application to test it, I get a class not found error for my login servlet. I have both the web.xml and the weblogic.xml descriptors in my WEB-INF directory, and all of my compiled classes are in the WEB-INF/classes directory, is there something else I'm missing? Any help would be much appreciated.

Thanks for the response. Here's the web.xml file:
<?xml version="1.0" ?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>Web Forms</display-name>
<servlet>
<servlet-name>LoginServlet</servlet-name>
<display-name>LoginServlet</display-name>
<servlet-class>LoginServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>ChangePasswordServlet</servlet-name>
<display-name>ChangePasswordServlet</display-name>
<servlet-class>ChangePasswordServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>LogoutServlet</servlet-name>
<display-name>LogoutServlet</display-name>
<servlet-class>LogoutServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>PageServlet</servlet-name>
<display-name>PageServlet</display-name>
<servlet-class>PageServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>UploadServlet</servlet-name>
<display-name>UploadServlet</display-name>
<servlet-class>UploadServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>LoginServlet</servlet-name>
<url-pattern>/LoginServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ChangePasswordServlet</servlet-name>
<url-pattern>/ChangePasswordServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>LogoutServlet</servlet-name>
<url-pattern>/LogoutServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>UploadServlet</servlet-name>
<url-pattern>/UploadServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>PageServlet</servlet-name>
<url-pattern>/PageServlet</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>Login.jsp</welcome-file>
</welcome-file-list>
</web-app>
None of the classes are in a package (I know it's not the best idea, but I didn't write these, I'm just doing some updates). So the file structure is pretty much just WEB-INF/classes/
At the moment I've got a fix by just putting the entire project (not in any sort of archive) on the server itself instead of deploying it as a WAR, any thoughts on why the WAR isn't working would be much appreciated though.

Windows Server 2012 GPO setting are not apply on windows Xp clients

Hi
I am create GPO on windows server 2012. 300 clients on domain are working fine, GPO setting apply on all windows 7, 8 clients. But 200 clients of windows XP are not working. GPO setting are not applies on XP. I am trying to Group Policy
Preference Client Side Extensions for Windows XP (KB943729) on one window XP client, all GPO servers 2012 setting is working fine. But is not solution. I have 200 clients of windows XP, Please provide batter solution on one click command and apply all 200
XP clients.
Thanks.

Dear,
I have Windows server 2012 , i have install ADDS with Forest functional level 2008 & Domain functional level 2008 .
I have applied GPO to particular OU, when i login to domain user on Windows 7 PC all GPO working fine but when i login on Windows Xp SP3 PC its not applied on XP.
I am facing issue on windows XP clients it is true. Please see this URL address:
http://blogs.technet.com/b/grouppolicy/archive/2009/03/27/group-policy-preferences-not-applying-on-some-clients-client-side-extension-xmllite.aspx
Please provide batter solution on one click command
Thanks.

SQL Server 2008 R2 Replication - not applying snapshot and not updating all repliacted columns

We are using transactional replicating on SQL Server 2008 R2 (SP1) using a remote distributor. We are replicating from BaanLN, which is an ERP application to up to 5 subscribers, all using push publications.
Tables can range from a couple million rows to 12 million rows and 100's of GBs in size.
And it's due to the size of the tables that it was designed with a one publisher to one table architecture.
Until recently it has been working very smooth (last four years)) but we have come across two issues I have never encountered.
While this has happen a half dozen times before, it last occurred a couple weeks ago when I was adding three new publications, again a one table per publication architecture.
We use standard SS repl proc calls to create the publications, which have been successful for years.
On this occasion replication created the three publications, assigned the subscribers and even generated the new snapshot for all three new publications.
However, while it appeared that replication had created all the publications correctly from end to end, it actually only applied one of the three snapshot and created the new table on both of the new subscribers (two on each of the
publications). It only applied the snapshot to one of the two subscribers for the second publications, and did not apply to any on the third.
I let it run for three hours to see if it was a back log issue.
Replication was showing commands coming across when looking at the sync verification at the publisher and
it would even successfully pass a tracer token through each of the three new publications, despite there not being tables on either subscriber on one of the publishers and missing on one of the subscribers on another.
I ended up attempting to reinitialize roughly a dozen times, spanning a day, and one of the two remaining publications was correctly reinitialized and the snapshot applied, but the second of the two (failed) again had the same mysterious result, and
again looked like it was successful based on all the monitoring.
So I kept reinitializing the last and after multiple attempts spanning a day, it too finally was built correctly.
Now the story only get a little stranger. We just found out yesterday that on Friday the 17th
at 7:45, the approximate time started the aforementioned deployment of the three new publications,
we also had three transaction from a stable and vetted publication send over all changes except for a single status column.
This publication has 12 million rows and is very active, with thousands of changes daily.
, The three rows did not replicate a status change from a 5 to a 6.
We verified that the status was in fact 6 on the publisher, and
5 on both subscribers, yet no messages or errors. All the other rows successfully updated.
We fixed it by updating the publication from 6 back to 5 then back to 6 again on those specific rows and it worked.
The CPU is low and overall latency is minimal on the distributor.
From all accounts the replication is stable and smooth, but very busy.
The issues above have only recently started. I am not sure where to look for a problem, and to that end, a solution.

I suspect the problem with the new publication/subscriptions not initializing may have been a result of timeouts but it is hard to say for sure. The fact that it eventually succeeded after multiple attempts leads me to believe this. If this happens
again, enable verbose agent logging for the Distribution Agent to see if you are getting query timeouts. Add the parameters
-OutputVerboseLevel 2 -Output C:\TEMP\DistributionAgent.log to the Distribution Agent Run Agent job step, rerun the agent, and collect the log.
If you are getting query timeouts, try increasing the Distribution Agent -QueryTimeOut parameter. The default is 1800 seconds. Try bumping this up to 3600 seconds.
Regarding the three transactions not replicating, inspect MSrepl_errors in the distribution database for the time these transactions occurred and see if any errors occurred.
Brandon Williams (blog |
linkedin)

Logical Server NOT applying archives

Similar Messages

Maybe you are looking for