2012 R2 - One server not applying two updates. Lists AD / SYSVOL Version Mismatch

So we have a bunch of servers running 2012 R2. On 1 or 2 of them I have a certain GPO that isn't applying. The specific one I'm having trouble with is our SNMP settings. The base settings applied but then we updated the GPO to add in an
additional IP address. Most servers pulled it down fine but 1 or 2 did not. Tried gpupdate /force and normal things and just can't get it to apply.
I can the gpresult /h and in the html file it says:
The following GPOs have special alerts
Default Domain Policy - AD / SYSVOL Version Mismatch
SNMP - AD / SYSVOL Version Mismatch
The only info I found on that error talks about a particular patch but we already have that patch installed. The change was put in over a week ago and is still not flowing to just these specific machines.
Anyone have any idea how I can figure out what the problem is? They are production machines so I can't reboot them until Saturday night when we are scheduled to do the Feb Patches anyway. I don't know if that will help or not so if there's something
else I can check in the meantime, that'd be great.
Thanks!

Quick note on this issue:
I was running RSOP against a user and server other than the local server, and the error would not go away, I tried installing the patches and rollups on the DC I was seeing the error on. Since these were already installed I tried installing
them from the stand alone download.
They complained about already being installed, so I was relegated to doing more research.
After some time, and while chasing a separate issue on the other server, I noticed that the updates on THAT SERVER were not up to date. I ran into issues updating due to corruption (another story altogether), but with the help of Microsoft Support,
I was able to get THAT SERVER updated.
I went back to troubleshooting the AD / Sysvol error, starting from scratch...trying to install the patches that were already installed...etc.
Just for grins and giggles, I re-ran the RSOP against the original user and the other server and viola, the error is gone.
Longer story than it needed to be, I know, but this leads me to believe that the error is NOT on the DC to DC but an issue with the server your running RSOP against. I am not positive that this is actually the case, but this may help someone out.
So if anyone can test and/or verify this please post.
Supreme executive power is derived from a mandate from the masses, not from some farcical aquatic ceremony. -- Dennis the peasant Les Waggoner WCC Internet Technologies

Similar Messages

Premier 9.0 Update failed. Could not apply the updates

I just did a reinstallation of Premier and made an update via Adobe update. I get this error. Update failed. Could not apply the updates. The error log can contain informtion to help you identify the problem. Then try to update again. Contact Customer Support if the problem persists.
The error log
Update Software for Premiere Elements 9.0.1
An error occurred while downloading this update. Cancel and try again later. Error: U43M1D207
I have tried several times but i can't solve it.
Does anyone know any tricks to love this
KR/
Joakim

Kimmey66
This question has been asked several times recently.
Do not bother with the issues of Premiere Elements 9.0 Help Menu/Update. Waste of energy. These updates involve only 9.0.1 and Camera Raw up to no more than 6.5. There is no more to be gotten after that.
The remedy is quick and easy.
Download and install the 9.0.1 Update from Adobe. You can do the download and install with Premiere Elements 9 closed.
If Windows
Adobe - Premiere Elements : For Windows : Premiere Elements 9.0.1 update
If Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4930
If you need Camera Raw 6.5 Windows (See instructions for manual install)
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.5 update
If you need Camera Raw 6.5 Mac (See instructions for manual install)
Adobe - Photoshop Elements : For Macintosh : Camera Raw 6.5 update for Elements 9
Please let us know if that worked for you. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

I have 3 iTunes libraries on my one one computer and since I updated to the new version I can no longer see who's library I am in. It used to show at the top of iTunes the name of the library I was in. Is there a way I can tell which library I am in?

I have 3 iTunes libraries on my one one computer and since I updated to the new version I can no longer see who's library I am in. It used to show at the top of iTunes the name of the library I was in. Is there a way I can tell which library I am in without closing and reopening?

No. Frequently the apps take up more storage space on the iPod that the file download size.

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

What's more, they don't even show on the bluetooth devices list..

Windows Server 2012 GPO setting are not apply on windows Xp clients

Hi
I am create GPO on windows server 2012. 300 clients on domain are working fine, GPO setting apply on all windows 7, 8 clients. But 200 clients of windows XP are not working. GPO setting are not applies on XP. I am trying to Group Policy
Preference Client Side Extensions for Windows XP (KB943729) on one window XP client, all GPO servers 2012 setting is working fine. But is not solution. I have 200 clients of windows XP, Please provide batter solution on one click command and apply all 200
XP clients.
Thanks.

Dear,
I have Windows server 2012 , i have install ADDS with Forest functional level 2008 & Domain functional level 2008 .
I have applied GPO to particular OU, when i login to domain user on Windows 7 PC all GPO working fine but when i login on Windows Xp SP3 PC its not applied on XP.
I am facing issue on windows XP clients it is true. Please see this URL address:
http://blogs.technet.com/b/grouppolicy/archive/2009/03/27/group-policy-preferences-not-applying-on-some-clients-client-side-extension-xmllite.aspx
Please provide batter solution on one click command
Thanks.

MDT 2013, D: Wim not applying after update from MDT 2010 to 2013

Updated MDT from MDT 2010 Update 1 to MDT 2012 Update 1, uninstalled WAIK, Installed MDT 2013, and then ADK, Upgraded all Deployment shares along the way, and now the extra drive (D:) Wim will not apply to Drive, i have tried two different ways to handle
the said action, the first was using the Unattend.xml, adding the DataImage Action, the other was using an Imagex command from the MDT task sequence. neither is applying the Wim, before the upgrade this worked. has any one else had this issue?
Thank you,
Dane Zittritsch
Thinix Support Manager

I moved from MDT 2010 to MDT 2013 and its just not working, i have tried a few different methods, the old way we used the
Unattend.xml and placed a install order and that always worked, but now i am trying to use Imagex and its not applying the wim, when i get in the image the D:\ (Second Drive) is missing files. Now here is the weird part, if i re-run the task sequence
the D WIM is applied, but that's counter productive. i will apply my TS.xml information.
Ts.xml
<?xml version="1.0"?>
-<sequence description="A complete task sequence for deploying a client operating system" name="Standard Client Task Sequence" version="3.00"> -<globalVarList> <variable name="OSGUID" property="OSGUID">{52bb4035-96e5-46f3-9d17-3d2a363895c3}</variable>
<variable name="DestinationDisk" property="DestinationDisk">0</variable>
<variable name="DestinationPartition" property="DestinationPartition">2</variable>
<variable name="DestinationOSVariable" property="DestinationOSVariable">OSDisk</variable>
<variable name="DestinationOSRefresh" property="DestinationOSRefresh"/>
<variable name="DestinationOSDriveLetter" property="DestinationOSDriveLetter"/>
<variable name="DestinationOSInstallType" property="DestinationOSInstallType">ByDiskPartition</variable>
</globalVarList>
-<group description="Initialize the TS environment" name="Initialization" expand="true" continueOnError="false" disable="false">
- <step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly"
property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action> </step> </group> -<group description="Test"
name="Validation" expand="true" continueOnError="false" disable="false"> -<condition> -<operator type="or"> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable> <variable
name="Operator">equals</variable> <variable name="Value">VALIDATION</variable> </expression> </operator> </condition> -<step description="" name="Validate" continueOnError="false" disable="false" startIn="" successCodeList="0
3010" type="BDD_Validate"> -<defaultVarList> <variable name="ImageSize" property="ImageSize">0</variable> <variable name="ImageProcessorSpeed" property="ImageProcessorSpeed">800</variable> <variable name="ImageMemory" property="ImageMemory">768</variable>
<variable name="VerifyOS" property="VerifyOS">CLIENT</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"</action> </step> -<step description="" name="Check BIOS" continueOnError="false" disable="false"
startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIBIOSCheck.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
-<step description="" name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> </group> -<group description="" name="State Capture" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">STATECAPTURE</variable> </expression> </condition> -<step description="" name="Next Phase" continueOnError="false"
disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
</group> -<group description="" name="Preinstall" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable>
<variable name="Operator">equals</variable> <variable name="Value">PREINSTALL</variable> </expression> </condition> -<step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0
3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action>
</step> -<group description="" name="New Computer only" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DeploymentType</variable>
<variable name="Operator">equals</variable> <variable name="Value">NEWCOMPUTER</variable> </expression> </condition> -<step description="" name="Validate" continueOnError="false" disable="false" startIn="" successCodeList="0
3010" type="BDD_Validate"> -<defaultVarList> <variable name="ImageSize" property="ImageSize">0</variable> <variable name="ImageProcessorSpeed" property="ImageProcessorSpeed">800</variable> <variable name="ImageMemory" property="ImageMemory">768</variable>
<variable name="VerifyOS" property="VerifyOS">CLIENT</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"</action> </step> -<step description="" name="Format and Partition Disk" continueOnError="false"
disable="true" successCodeList="0 3010" type="SMS_TaskSequence_PartitionDiskAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="OSDDiskIndex" property="DiskIndex">0</variable> <variable name="DONotCreateExtraPartition"
property="DONotCreateExtraPartition"/> <variable name="OSDPartitions0Type" property="Partitions0Type">Primary</variable> <variable name="OSDPartitions0FileSystem" property="Partitions0FileSystem">NTFS</variable> <variable name="OSDPartitions0Bootable"
property="Partitions0Bootable">True</variable> <variable name="OSDPartitions0QuickFormat" property="Partitions0QuickFormat">True</variable> <variable name="OSDPartitions0VolumeName" property="Partitions0VolumeName">OSDisk</variable>
<variable name="OSDPartitions0Size" property="Partitions0Size">100</variable> <variable name="OSDPartitions0SizeUnits" property="Partitions0SizeUnits">%</variable> <variable name="OSDPartitions0VolumeLetterVariable" property="Partitions0VolumeLetterVariable">OSDisk</variable>
<variable name="OSDPartitions" property="Partitions">1</variable> <variable name="OSDPartitionStyle" property="PartitionStyle">MBR</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDiskpart.wsf"</action>
</step> -<step description="You can change the size of the partition(s) in the \Scripts\WinRE\DiskConfig.txt file. Make sure your partition is large enough to hold the recovery image if you install alot of software. Current configuration is 160GB
for recovery, 60 for OS, 10 for scratch" name="Format and Partition Disk [Custom]" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable
name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010 BETA\Configure-HDD.cmd"</action> </step> -<step
description="" name="Copy scripts" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTICopyScripts.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> </group> -<step description="" name="Configure" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIConfigure.wsf"</action> -<defaultVarList>
<variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Inject Drivers" continueOnError="false" disable="false" successCodeList="0 3010" type="BDD_InjectDrivers"
runIn="WinPEandFullOS"> -<defaultVarList> <variable name="DriverSelectionProfile" property="DriverSelectionProfile">Dell OptiPlex 790</variable> <variable name="DriverInjectionMode" property="DriverInjectionMode">ALL</variable>
</defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action> </step> -<step description="" name="Apply Patches" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_InstallUpdatesOffline">
<action>cscript.exe "%SCRIPTROOT%\ZTIPatches.wsf"</action> -<defaultVarList> <variable name="PackageSelectionProfile" property="PackageSelectionProfile">All Packages</variable> </defaultVarList> </step> -<step description=""
name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> </group> -<group description="" name="Install" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">INSTALL</variable> </expression> </condition> -<step description="" name="[Custom] Apply D Wim " continueOnError="false"
disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> -<step description="" name="Install Operating System" continueOnError="false" disable="false" successCodeList="0 3010" type="BDD_InstallOS" runIn="WinPEandFullOS">
-<defaultVarList> <variable name="OSGUID" property="OSGUID">{52bb4035-96e5-46f3-9d17-3d2a363895c3}</variable> <variable name="DestinationDisk" property="DestinationDisk">0</variable> <variable name="DestinationPartition" property="DestinationPartition">2</variable>
<variable name="DestinationOSDriveLetter" property="DestinationOSDriveLetter"/> <variable name="DestinationOSVariable" property="DestinationOSVariable">OSDisk</variable> <variable name="DestinationOSRefresh" property="DestinationOSRefresh"/>
<variable name="DestinationOSInstallType" property="DestinationOSInstallType">ByDiskPartition</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\LTIApply.wsf"</action> </step> -<step description="" name="Restart
computer" continueOnError="false" disable="false" successCodeList="0 3010" type="SMS_TaskSequence_RebootAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="SMSRebootMessage" property="Message"/> <variable name="SMSRebootTimeout"
property="MessageTimeout">60</variable> <variable name="SMSRebootTarget" property="Target"/> </defaultVarList> <action>smsboot.exe /target:WinPE</action> </step> -<step description="" name="Next Phase" continueOnError="false"
disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
</group> -<group description="" name="Postinstall" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable>
<variable name="Operator">equals</variable> <variable name="Value">POSTINSTALL</variable> </expression> </condition> -<step description="" name="Copy Scripts" continueOnError="false" disable="true" startIn="" successCodeList="0
3010"> <action>cscript.exe "%SCRIPTROOT%\LTICopyScripts.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
<variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Configure"
continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIConfigure.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable
name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> -<step description="Applies the D: wim to System " name="Apply Scratch Drive" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS">
-<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable
name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"\\thinix-dev1\navyImage$\Tools\x86\imagex.exe" /apply
"\\thinix-dev1\navyImage$\Operating Systems\navycnic-gen_20131226100000\navycnic-gen_20131226100000_ddrive.wim" 1 D:\</action> </step> -<step description="" name="Inject Drivers" continueOnError="false" disable="false" startIn="" successCodeList="0
3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIdrivers.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
<variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<group description="" name="Custom
Tasks" expand="true" continueOnError="false" disable="false"> -<step description="Makes sure there is no Boot Config files on C drive and changes them to R drive:" name="Recovery Partition" continueOnError="false" disable="false" startIn="" successCodeList="0
3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\Re-assign
DriveLetter.cmd"</action> </step> -<step description="" name="[Custom] Apply D Wim " continueOnError="false" disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList>
<variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> -<step description=""
name="[Custom] TDRBCD" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable
name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\TDRBCD.exe"</action> </step> -<step description="" name="[Custom] Apply D Wim " continueOnError="false"
disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> </group> -<step description="" name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
"%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Set Phase" continueOnError="false" disable="false" successCodeList="0
3010" type="SMS_TaskSequence_SetVariableAction"> -<defaultVarList> <variable name="VariableName" property="VariableName">PHASE</variable> <variable name="VariableValue" property="VariableValue">STATERESTORE</variable> </defaultVarList>
<action>cscript.exe "%SCRIPTROOT%\ZTISetVariable.wsf"</action> </step> </group> -<group description="" name="State Restore" expand="false" continueOnError="false" disable="true"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression">
<variable name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">STATERESTORE</variable> </expression> </condition> -<step description="" name="Gather local only"
continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/>
</defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action> </step> -<step description="" name="Post-Apply Cleanup" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
"%SCRIPTROOT%\LTIApply.wsf" /post</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Recover From Domain " continueOnError="false" disable="false"
successCodeList="0 3010" type="BDD_RecoverDomainJoin" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="DomainErrorRecovery" property="DomainErrorRecovery">Auto</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDomainJoin.wsf"
</action> </step> -<step description="" name="Tattoo" continueOnError="true" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTITatoo.wsf"</action> -<defaultVarList> <variable name="RunAsUser"
property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile"
property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Opt In to CEIP and WER" continueOnError="true" disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIOptIn.wsf"
/CEIP:YES /WER:YES</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Windows Update (Pre-Application Installation)" continueOnError="true"
disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIWindowsUpdate.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
-<step description="" name="Install Applications" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_InstallApplication"> <action>cscript.exe "%SCRIPTROOT%\ZTIApplications.wsf"</action> -<defaultVarList>
<variable name="ApplicationGUID" property="ApplicationGUID"/> <variable name="ApplicationSuccessCodes" property="ApplicationSuccessCodes">0 3010</variable> </defaultVarList> </step> -<step description="" name="Windows Update
(Post-Application Installation)" continueOnError="true" disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIWindowsUpdate.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> <group description="" name="Custom Tasks" expand="true" continueOnError="false" disable="false"/> -<step description="" name="Enable BitLocker" continueOnError="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_EnableBitLockerAction">
<action>cscript.exe "%SCRIPTROOT%\ZTIBde.wsf"</action> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">BdeInstallSuppress</variable> <variable name="Operator">notEquals</variable>
<variable name="Value">YES</variable> </expression> </condition> -<defaultVarList> <variable name="OSDBitLockerTargetDrive" property="BdeTargetDriveLetter"/> <variable name="OSDBitLockerMode" property="BdeInstall">TPM</variable>
<variable name="OSDBitLockerStartupKeyDrive" property="BdeKeyLocation"/> <variable name="OSDBitLockerCreateRecoveryPassword" property="BdeRecoveryPassword">AD</variable> <variable name="OSDBitLockerWaitForEncryption" property="WaitForEncryption">false</variable>
</defaultVarList> </step> -<step description="" name="Restore User State" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIUserState.wsf" /restore</action> -<defaultVarList>
<variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Restore Groups" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
"%SCRIPTROOT%\ZTIGroups.wsf" /restore</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable
name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Apply Local GPO Package"
continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIApplyGPOPack.wsf"</action> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
name="Variable">ApplyGPOPack</variable> <variable name="Operator">notEquals</variable> <variable name="Value">NO</variable> </expression> </condition> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> -<group description="" name="Imaging" expand="false" continueOnError="false" disable="false"> <action/> -<group description="" name="Prepare Only" expand="false" continueOnError="false" disable="false">
-<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">PREPARE</variable>
</expression> </condition> -<step description="" name="Copy Sysprep files" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList>
<variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> </group> -<group description="" name="Sysprep Only" expand="false" continueOnError="false" disable="false"> -<condition>
-<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">SYSPREP</variable> </expression>
</condition> -<step description="" name="Add mass storage drivers to sysprep.inf for XP and 2003" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action>
-<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Execute Sysprep" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
"%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> </group> -<group description="" name="Capture Image" expand="false" continueOnError="false"
disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">YES</variable>
</expression> </condition> -<step description="" name="Apply Windows PE" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTIApply.wsf" /PE /STAGE</action> -<defaultVarList>
<variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Add mass storage drivers to sysprep.inf for XP and 2003" continueOnError="false" disable="false" startIn=""
successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
<variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Execute
Sysprep" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> -<step description="" name="Apply Windows PE (BCD)" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%_SMSTSMDataPath%\Scripts\LTIApply.wsf" /PE /BCD</action>
-<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">ImageBuild</variable> <variable name="Operator">greaterEqual</variable> <variable name="Value">6</variable>
</expression> </condition> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Restart computer" continueOnError="false" disable="false"
successCodeList="0 3010" type="SMS_TaskSequence_RebootAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="Message" property="Message"/> <variable name="MessageTimeout" property="MessageTimeout">60</variable> <variable
name="Target" property="Target"/> </defaultVarList> <action>smsboot.exe /target:WinPE</action> </step> -<step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"
type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action>
</step> -<step description="" name="Create WIM" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIBackup.wsf"</action> -<defaultVarList> <variable name="RunAsUser"
property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile"
property="LoadProfile">false</variable> </defaultVarList> </step> </group> </group> </group> </sequence>

Jsp (executing in one server not in other)

hi,
my jsp page is running in tomcat server but not in iplanet server, i am getting problem as below.can somebody help me. thanks in advance.
There was some problem with the jsp as it was not running on the server. I kept on getting the error
Server Error
This server has encountered an internal error which prevents it from
fulfilling the request. The most likely cause is a misconfiguration.
In the log I could find this
[30/Jun/2003:19:08:09] info ( 5253): JSP: JSP1x compiler threw exception
org.apache.jasper.JasperException: Invalid jsp:include tag
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at javax.servlet.ServletException.<init>(ServletException.java:68)
at org.apache.jasper.JasperException.<init>(JasperException.java:73)
at
org.apache.jasper.compiler.IncludeGenerator.<init>(IncludeGenerator.java:95)
at
org.apache.jasper.compiler.JspParseEventListener.handleInclude(JspParseEventListener.java:879)
at
org.apache.jasper.compiler.DelegatingListener.handleInclude(Compiled Code)
at org.apache.jasper.compiler.Parser$Include.accept(Compiled Code)
at org.apache.jasper.compiler.Parser.parse(Compiled Code)
at org.apache.jasper.compiler.Parser.parse(Compiled Code)
at org.apache.jasper.compiler.Parser.parse(Compiled Code)
at org.apache.jasper.compiler.Compiler.compile(Compiled Code)
at com.netscape.server.http.servlet.NSServletEntity.load(Compiled
Code)
at com.netscape.server.http.servlet.NSServletEntity.update(Compiled
Code)
at com.netscape.server.http.servlet.NSServletRunner.Service(Compiled
Code)
[30/Jun/2003:19:08:09] warning ( 5253): Internal error: Failed to get
GenericServlet.
(uri=/crux/compute_300603.jsp,SCRIPT_NAME=/crux/compute_300603.jsp)
my code is like this
(compute_300603.jsp)
<%@page contentType="text/html"%>
<html>
<head><title>JSP Page</title></head>
<SCRIPT>
</SCRIPT>
<body >
<%-- <jsp:useBean id="beanInstanceName" scope="session" class="package.class" /> --%>
<%-- <jsp:getProperty name="beanInstanceName" property="propertyName" /> --%>
<%boolean flag=true;%>
<% if (request.getParameter("fno")==
null && request.getParameter("sno")
== null) { %>
<CENTER>
<jsp:include page='top.jsp' />
<H2>Please enter two numbers</H2>
<FORM METHOD="POST" ACTION="compute_300603.jsp">
<table bgcolor='snow'>
<P>
Your First no: <input type="text" name=
"fno" size=10>
<P>
Your Second no: <input type="text" name=
"sno" size=10>
<P>
</TABLE>
</FORM>
</CENTER>
<% } else { %>
<CENTER><jsp:include page='top.jsp' /> </CENTER>
<%! int fno, sno ,total; String opr;%>
<%
try{
fno = Integer.parseInt(request.getParameter("fno"));
sno= Integer.parseInt(request.getParameter("sno"));
if(Integer.parseInt(request.getParameter("pro"))==1){
opr="Addition";
total= fno + sno;
else if(Integer.parseInt(request.getParameter("pro"))==2){
opr="Subtraction";
total= fno - sno;
else if(Integer.parseInt(request.getParameter("pro"))==3){
opr="Multiplication";
total= fno * sno;
else if(Integer.parseInt(request.getParameter("pro"))==4){
opr="Division";
try{
total= fno/sno;
}catch(ArithmeticException e){flag=false;%>
<center>
<b> <%= "Invalid Data entered" %> </b> <br>
<br> <b> Click here to reenter </b>
</center>
<%}
}catch(NumberFormatException e) {
System.out.println("NumberFormatException occured");
flag=false;%>
<center>
<b> <%= "Invalid Data entered" %> </b> <br>
<br> <b> Click here to reenter </b>
</center>
<%}%>
<%if(flag){ %>
<CENTER>
<H2>Please enter two numbers</H2>
<FORM>
<table bgcolor='snow'>
<P>
Your First no: <input ="text" name=
"fno" size=10 value="<%= fno %>">
<P>
Your Second no: <input type="text" name=
"sno" size=10 value="<%= sno %>">
<P>
</TABLE>
</FORM>
</CENTER>
<P>
<B>You have provided the following info</B>:
<P>
<B>First</B>: <%= fno %><P>
<B>Second</B>: <%= sno %><p>
<B>Operation Done</B>: <%= opr %><p>
<B>Your Total Is</B>:<%= total%>
<% }} %>
</body>
</html>
(top.jsp)
<html>
<head><title>JSP Page</title></head>
<script>
function formSubmitAdd(){
document.topForm.submit();
function formSubmitSub(){
document.topForm.pro.value=2;
document.topForm.submit();
function formSubmitMulty(){
document.topForm.pro.value=3;
document.topForm.submit();
function formSubmitDiv(){
document.topForm.pro.value=4;
document.topForm.submit();
</script>
<body>
<FORM name='topForm' action='compute_300603.jsp'>
<INPUT type=hidden name=pro value=1>
<input type=BUTTON value=Add onclick=formSubmitAdd();>
<input type=BUTTON value=Multiply onclick=formSubmitMulty();>
<input type=BUTTON value=Substract onclick=formSubmitSub();>
<INPUT type=BUTTON value=Divide onclick=formSubmitDiv();>
<%-- <jsp:useBean id="beanInstanceName" scope="session" class="package.class" /> --%>
<%-- <jsp:getProperty name="beanInstanceName" property="propertyName" /> --%>
</body>
</html>

It seems that the server detected an error on the
<jsp:include ..> tag.
Try replacing <jsp:include page='top.jsp' /> by
<jsp:include page="top.jsp" /> I have the same problem.. and this didnt work.. I also added flush="true". It works fine on tomcat but not on NES (netscape)
Any suggestions..?
Thanks..
Kamala

JDBC with CLOB abnomally - shows on one server, not the other

Hi have a problem.
I recently moved a web application to another server. I copied over all the same java libraries I had on the first server.
The web application queries an Oracle table - the table contains one CLOB field.
When I query the table on the first server, I can see the contents of the CLOB.
When I query the table with the other server, the query is empty for the CLOB field.
This is the code I use to query the table. I have connection pooling set up within Sun Web Server. If it works on the one server, why would it not work with the other server? This is driving me crazy!!
Any suggestions?
try{
            // Get connection from configured pool
            initContext = new InitialContext();
            source = (DataSource) initContext.lookup("java:comp/env/jdbc/myDB");
            conn = source.getConnection();
            if(conn != null){
                stmt = conn.createStatement();
                result = stmt.executeQuery(sql);
                rsmd = result.getMetaData();
                while(result.next()){
                    Hashtable hash = new Hashtable();
                    for(int i = 1; i <= rsmd.getColumnCount(); i++){
                        if(result.getString(i) != null){
                            hash.put(rsmd.getColumnName(i),result.getString(i));
                        }else{
                            hash.put(rsmd.getColumnName(i),"");
                    returnValue.addElement(hash);
        }catch (Exception e){
            setErrors(e.toString());
            Email.sendMail("[email protected],"subject","Exception: " + e.toString() + "\nWith: " + sql,"fromname");
        }

I tried that with this code:
<body>
          <h1>
               JSP Example
          </h1>
          <%
          Connection dbconn=null;
          ResultSet results=null;
          PreparedStatement sql=null;
          try{
               Class.forName("oracle.jdbc.OracleDriver");
               try{
                    boolean     doneheading = false;
                    dbconn = DriverManager.getConnection("jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=host.com) (PORT=1521))(CONNECT_DATA=(SERVICE_NAME=theserver.com)))","username", "password");
                    sql = dbconn.prepareStatement("SELECT * FROM BE_STATUS_EMAILS WHERE ID='42575'");
                    results = sql.executeQuery();
                    while(results.next()){
                         if(!doneheading){
                              out.println("<table border=2>");
                              doneheading = true;
                         out.println("<tr><td>" + results.getString("ID"));
                         out.println("<td>" + results.getString("RECEIVED"));
                         out.println("<td>" + results.getString("TYPE1"));
                         out.println("<td>" + results.getString("FROM1"));
                         out.println("<td>" + results.getString("TO1"));
                         out.println("<td>" + results.getString("CC"));
                         out.println("<td>" + results.getString("SUBJECT"));
                         out.println("<td>" + results.getString("MESSAGE"));
                         out.println("<td>" + results.getString("STATUS"));
                    if(doneheading){
                         out.println("</table>");
                    }else{
                         out.println("No results");
               }catch (SQLException s){
                    out.println("SQL Error<br>");
               }finally{
                    if(dbconn!=null)dbconn.close();
          }catch (ClassNotFoundException err){
               out.println("Class loading error");
          %>
     </body>It produced the output, but again, the CLOB field was null. But when I query the database with that SQL using a database query tool, like Aquastudio, I can see the output. And if I run the stub on the other server, it works! This is nuts!!
Any suggestions?

Logical Server NOT applying archives

Grid Control is showing all working fine, checked the configuration it show everything is fine. Logical server is receiving all the logs, but not applying. Can anyone tell WHY???
Thanks

Is logical server the standby server???. If yes, then is recovery managed cancelled.If so, then alter database recover managed standby database discconect from session; will start applying the archives automatically.
Anand

Server not found after updating firefox. HEEEEELLLPPP!!!!

Im using windows Vista. 3days ago, I launched firefox setup3.6..exe internet connection and mozilla worked fine.
when i restarted my laptop, I just can't connect to the internet- it says SERVER NOT FOUND but I am sure Im connected (my brother's laptop is)
so I uninstalled my NORTON,
i also UNINSTALLED my MOZILLA and reinstalled it.
stil NOT WORKING
checked my firewall... checked mozilla TOOLs- use no proxy
what am i suppose to do?? i really need my MOZILLA. thanks

Did you empty your browser cache before typing in your url into your web browser?
Did you type in the url directly rather than clicking on the visit site button?
Have you actually published your site?
Are you using iWeb built in ftp? If you are then perhaps try publishing your site to a local folder from iWeb and using an ftp client such as Cyberduck to upload your site to your server.

HT1222 When there is a browser update like this Safari 5.1.4, Is there an article that instructs one the ideal way to update to a newer version of a browser like this newer version of Safari? Is it best to close Safari and all other apps, restart...

When there is an update to a newer version of a browser like this update to Safari 5.1.4, is there an article that goes over the best way to update to a newer version of a browser that one knows of? Is it best to close all apps, install the update, turn the computer off, turn it on and hold down the shift key until the gear and progress bar are showing, when this is finished, do a restart of the computer. I hav always wondered the best way (if there is a best way) to update to a newer version of a browser so you avoid potential problems. Is there a Support Article that goes over installing and updating to a newer version of one's browser, in this case Safari?
Thanks.

The following may or may not apply to Lion:
Repairing permissions is important, and should always be carried out both before and after any software installation or update.
Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
In First Aid, click on Repair Permissions.
This only takes a minute or two in Tiger, but much longer in Later versions of OS X.
Background information here:
http://support.apple.com/kb/HT1452?viewlocale=en_US
and here:
http://docs.info.apple.com/article.html?artnum=302672
An article on troubleshooting Permissions can be found here:
http://support.apple.com/kb/HT2963
By the way, you can ignore any messages about SUID or ACL file permissions, as explained here:
http://support.apple.com/kb/TS1448?
If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.
More useful reading here:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/TS1417?viewlocale=en_US
For a full description of how to resolve Disk, Permission and Cache Corruption, you should read this FAQ from the X Lab:
http://www.thexlab.com/faqs/repairprocess.html
Apple's advice on general maintenance:
http://support.apple.com/kb/HT1147?viewlocale=en_US

5c in recovery mode will not restore or update - iTunes is current version - Completely lost and very frustrated :o(

My phone lately has been searching for service constantly, I would say that 80%of my day my phone is searching for service. There was a software update for I think 8.1.2, my phone didn't have enough storage, so I tried to do it through iTunes, when I did that, I got the connect to iTunes screen and couldn't get past it. So now I have put my phone into recovery mode and have run into nothing but issues. One iTunes will not let me update the software, secondly I can't restore it, I get a pop up saying something that my device isn't recognized. I'm completely lost and frustrated Need some suggestions...

Hello sarmath,
Thanks for using Apple Support Communities.
From your post I understand that your iPhone is in recovery mode, and while trying to restore it in iTunes you are receiving an error message. While certainly a frustrating experience, there is troubleshooting you can do to get your iPhone back up in running order. Without a specific error message, the article below is where you can start. If possible, please provide the exact error message you receive when trying to restore your iPhone so I can give you some more in depth help.
Resolve iOS update and restore errors in iTunes - Apple Support
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H.

First Generation ipad stuck on ios 5.1.1. I am not able to update to a newer version because it believes the Ipad is at its most update version.

Hello all,
My mother in law has recently acquired a new ipad and has given me her first generation ipad. Very excited! I have run into an issue though... The ipad is unable to update to the newest version of ios and is stuck on ios 5.1.1. Whether I plug the ipad in or try to update via wifi, it prompts me that it is running on the most up to date version.
Has anyone seen this problem before? Can anyone help me fix the issue?
Thanks,
Luke

If you need help finding iOS 5 compatible apps:
Finding iOS Apps Compatible with Older Devices
App Store: Downloading Older Versions of Apps
(Note that I am affiliated with this site, and some pages contain ads).

Create ISO of Windows Server 2012 R2 Physical Server - NOT VM

I have a windows server 2012 R2 installed on a physical server. I have windows patches and other firmware upgrades on it. I would like to create a gold image in the form of ISO, so that i can use this ISO and build my other servers. I have read many many
blogs but none of them have clear steps. I know there are tons of ways to do this for VM, but this is for a physical machine. I have used sysprep, completely messed up my server, i am used there is no warning or anything listed on technet for using this software.
If anyone has able to do this successfully please let me know. Please don't send me instructions for VM, this is not a VM, it is a physical server. Thanks in advance.

Okay, it's been a while since I worked with MDT and my memory was bad. The best thing to do is to download MDT (https://www.microsoft.com/en-us/download/details.aspx?id=40796
for the 2013 version) and its documentation. One of the documents is a Quick Start Guide. It gives you step-by-step instructions on how to do what you are asking. It doesn't make sense to replicate all that content in a forum when there is
already a published document.
Then, if you have problems with performing the tasks, come back to this forum and ask specific questions about the issues you are encountering.
Note, the documentation assumes working with Windows 8.1, but it also says it supports it for Windows Server.
. : | : . : | : . tim
Thanks Tim. I started working on it, i do have few questions:
i) Why do i need 3 machines as per the document "Quick Start Guide for Lite Touch Installation.docx"? I am not quite following here, can i just do it on 2 servers, 1 which will capture the image and server 2 will be used to build using captured image.
ii) I was able to get till Step 41. (page 17 from doc 'Quick Start Guide for Lite Touch Installation.docx'), i do see the ISO created, but it is only 300 MB? My original ISO was 4 gb. I don't think i can just copy the 300 MB iso and build another machine, i
am lost here, any advice is appreciated.
Thanks

2012 R2 - One server not applying two updates. Lists AD / SYSVOL Version Mismatch

Similar Messages

Maybe you are looking for