Logical system has not been assigned to any business grp

We have converted R/3 system (4.6c) from EBCDIC to ASCII. R/3 is integrated with SCM 5.0. Everything was fine before conversion. After Conversion, in SCM qRFC Monitor Inbound Queue (TCODE = SMQ2), we are getting the
error "Logical system &##ä<+è### has not been assigned to any business
system gr".
Error Message no. SR053
The problem happens because the logical system has strange value
in the inbound queues.
Preblem still persists even after performing various things:
Re-created and Activated the CIF Integration Models
Checked all settings in both systems
Ran CCR
Checked table CIFLOOKU
Any ideas are highly appreciated? Thanks

thanks。 I have the same issues. like this:
Logical system I11CLNT800 has not been assigned to any business system group
Message no. /SAPAPO/CIF007
System Response
The data cannot be assigned to a logical system.
Procedure
Check if the logical system has been maintained, and assign the logical system to the business system group.
the  I11CLNT800  is my ECC logic system. I had assigned it to ECC Client 800,and  a BSG I11800 in APO system.
Can u give me any suggestions?
before, someone had suggested me to define partner profile in WE20 and WE21, but they does not work.
waiting on desk
thanks
Edited by: Xinyou Dong on Jun 3, 2011 1:01 PM

Similar Messages

  • Regarding "Error  An SLD system has not been assigned to logical system "

    Hi all,
    I am trying to connect SRM system to an XI system. All the settings are done (or I thought so). When I try to send a PO via XML/XI to the XI system in SRM Web UI, it gives me the following error:
    nformation  Processing BBP_PO_SEND_XML Is Started  
    Error  An SLD system has not been assigned to logical system  
    Error  Action could not be successfully executed 
    The backend systems are defined in spro. When I debugged the coding, I find that the right Logical system itself is not picked up - is there any thing missed out?
    Thanks,
    Vijay

    Hi,
    You should assign this here:
    Supplier Relationship Management -> SRM Server -> Technical Basic Settings -> Define Backend Systems.
    Here you should fill the "System Landscape Directory Name" for the systems you have defined.
    Regards
    Kathirvel

  • An SLD system has not been assigned to logical system TEC101

    Hello all
    We are trying to send an message RFC or IDOC from our SRM (5.0) system to the XI (7.0). But we allways get the error
    "An SLD system has not been assigned to logical system TEC101". In the SLD the system is visible, sldcheck works.
    Does anyone know this problem and can give me a hint how to fix this problem?
    Thanks a lot
    Stefan

    Hi Stefan,
    Is there a technical & Business System for SRM5.0 in SLD? If entry exists then confirm if the logical system name mentioned in Business System is TEC101.
    If entry does not exist in SLD for SRM, then in SRM run t-code
    1) SLDAPICUST .. Enter relevant details
    2) RZ70 : Give XI Server details , activate and then Execute.
    Once you do that you can see entry for SRM in SLD.
    After that try running the schenario again.
    Regards,
    Sumit

  • An SLD system has not been assigned to logical system

    Hi masters
    I trying send PO in XML to SUS through XI ,
    but when try to send the SRM/EB system show the next message
    Processing BBP_PO_SEND_XML Is Started
    An SLD system has not been assigned to logical system
    Action could not be successfully executed
    in XI system  I defined the SLD sistem for SRM/EB and SRM/SUS
    that SLD name  is settup into define system Landscape into colum System Land Directory Name
    in SLDCHECK all is Ok on green light.
    what can I do ?

    Hi. Nikhil.
    In SRM/EB
    1.- trying configurates SMXB_ADM 
    2.- Integratio Engine configration
    3.- Role of Business System    = Application System
    4.- Corresponding Integ. Server = dest://RFC  type H for XI system,
    problem .
    when I push bottom check (F7)
    the message is the next
    red light No access to system Landscape at present

  • SLD system has not been assigned ? :-(

    Hi Guys,
    This is an easy question for SRM gurus =)
    I need to send the PO in format XML to the vendors (using XI).    When I try to send a PO I can see this error message in "Issue Purchase Order" option menu.
    Information  Date: 13.06.2006 Time: 10:19:38  
    Information  Processing BBP_PO_SEND_XML Is Started  
    Error  An SLD system has not been assigned to logical system SRDCLNT120  
    Error  Action could not be successfully executed 
    Could anybody give me any help about this ?  I have searched in sdn and oss without success =(
    Thanks for your help !
    Regards,
    Diego

    Hi Christophe, my feedback:
    A) In "Define backend system", I entered the XI alias name defined in tx: SLDAPICUST
    B) Now the process doesnt throw any error in SRM, but the PO document is not arriving to XI neither =(
    My questions are:
    1. Should I put that alias in that field ?   Or should I put the SLD server name?   Should be an RFC conn name to XI?
    2. Should I do anything additional to point 1?  For example: in tx. SLBBP_RFCDEST the PO scenario is directed to "BBP_XML_PO".    Should I made a change on this ?
    Thanks for your help !
    Best regrads,
    Diego

  • Logical system name has not been assigned to

    Hi, Expert
    I m trying to transferr DATA from ECC to APO . when I configured my ECC and APO systems according the SCM 210, but I still meet the error like this
    logical system name has not been assigned to
    syste: user:
    Function/Q/SAPAPO/CIF_PRODUCT_INBOUND
    text: logical system name has not been assigned to
    my ECC is ECC6.0,and APO 7.0
    Can u help me,Thank u. I m waiting the solution on desk
    Rockey
    Edited by: Xinyou Dong on Jun 2, 2011 9:11 AM

    Hi,
    I think you dont have partner profile created.
    Try to create one with the RFC which is connecting ECC and APO.
    Thanks,
    Deepthi

  • Error while MIRO posting: Unique co code has not been assigned to co number

    Hi all
    I am getting the following error while posting MIRO-
    "A unique co code has not been assigned to co no". I think this might have to do something with CO no range. Is it so. Does any1 have any idea what this could be because of?
    Thxs in advance
    Hrishi

    Hi Vishnu
    Thxs for ur immediate reply. But cross co conttrolling is not active in my case. The error diagnosis reads as follows-
    Doc breakdown is active in ur system. In certain cases, a co code is derieved frm the Co ID no and this must lead to the assignment of a unique co code.
    A unique co code could not be assigned to Co no.
    Message No GLT0001

  • G/L Account has not been assigned for PONHLD customisation

    Dear All,
    I am getting an error while creating Excise Invoice, when I'm choosing the Choose Balance Tab in J1IIN, system is throwing an error message, "G/L Account has not been assigned for PONHLD customisation."
    Can anybody help me,pls or if you can advise that should this tab be selected before processing any further with J1IIN?
    Rgds,
    Indrajit

    Dear Hase,
    Please to Revert the solution which you got. Because same Problem I am facing. I have done all the LG Tax setting. If you give in details i will be very much thankful....
    Waiting...
    SPT

  • Unique company code has not been assigned to company number

    Dear Experts,
    When I am posting the customer advance amount in FBCJ I am getting the below mentioned error.
    Unique company code has not been assigned to company number
    Message no. GLT0001
    Diagnosis
    Document breakdown is active in your system. In certain cases, a company code is derived from the company ID number, and this must lead to the assignment of a unique company code.
    A unique company code could not be assigned to company number .
    System Response
    You cannot carry out the required posting.
    Procedure
    Assign one company code to company number .
    Did I miss any config settings.
    Thanks in advance,
    Regards
    Aswin

    Hi,
    We faced the same issue and we managed to solve it thanks to SAP Support assistance. The system at the time of posting is looking for a value in the Field "Trading Partner" in the FBCJ Transaction code. That field is required because the item is like a Company Code clearing therefore if the field is not filled it cannot determine the Company code during posting.
    To solve this you have two approaches:
    To treat each Cash journal separately you need to Fill the Trading Partner field individually in the FBCJ with the respective value. Select the same Trading Partner as your original company code (even if you select other company code you cannot post Inter company through FBCJ).
    Go to FS01/FS02 of the particular account you face this issue and define a Trading Partner in the Type/Description Tab under Consolidation data in Chart of accounts. With this way the Trading Partner will apply for all postings concerning that particular GL Account and there will be no need for the first approach described above.
    I hope this helps.
    Regards,
    Athos Kyriakides

  • A unique company code has not been assigned to company number 1000

    Dear Friends,
    When I do Inter-Company Transaction thro Transaction Code FB60 it is giving me Error.
    For Example: if I have 2 Company Codes - 8001 & 8002
    I want to Post One Vendor Invoice
    Ex:
    Vendor - 301 ABC Ltd., 5000 Credit
    400020 - Expenses 2000 Debit - Company Code - NGLC
    (Then Debit Expenses G/L Account 460000 for Company Code NGLC1)
    400020 - Expenses 3000 Debit - Company Code - 1000
    (Then Debit Expenses G/L Account 460100 for Company Code 1000)
    When I am going to POST it is giving me an Error please sees below.
    Error Message
    A unique company code has not been assigned to company number 1000
    Message no. GLT0001
    Diagnosis
    Document breakdown is active in your system. In certain cases, a company code is derived from the company ID number, and this must lead to the assignment of a unique company code.
    A unique company code could not be assigned to company number 1000.
    System Response
    You cannot carry out the required posting.
    Procedure
    Assign one company code to company number 1000.
    Please tell me How to solve this issue.
    Thanks in Advance,
    Ranga

    Hi Ranga
    Can you please check OBY6 settings (Additional details) for the co. codes, as it seems either multiple co. codes have been assinged to company number 1000 or none of the relevant co. codes have been assigned with company ID.
    Regards

  • "Your system has not been modified" iTunes download error.

    Hello, this is my first time asking for support so I hope I provide all the information needed.
    Background:
    A while back my elder sister went into my computer and messed some settings up because iTunes was being wonky and not updating her new iPhone properly (turns out later the iPhone itself was having issues - not my computer nor iTunes). I used an older version of iTunes because I had an older iTouch and didn't need the newest version, but I didn't have any complaints when she updated it. I come back one day and iTunes isn't working alltogether, and when I plug in my iTouch it tells me there's an error and I need to re-install iTunes (or somewhere along that line, I was stupid and didn't screencap the message). (I asked her what she had done and said "Updated your computer! It hadn't been updated in so long, and then iTunes stopped working! Beats me!" and she can't tell me exactly WHAT she changed and downloaded.) So, I went through the uninstall process and went to the Apple website to download it again, but it kept giving me a "Your system has not been modified" error. This was a long time ago but I came back to my computer to try and solve it again and I've tried to redownload it off the website multiple times but it gives me the same error.
    I went into my control panel and "add/remove progreams" to see if anything was left over from the uninstall process but I can't find any iTunes files. Any idea on how to get iTunes back onto my computer?
    TL;DR:
    "iTunes Installer Completed
    The installer encountered errors before iTunes could be configured.
    Errors occured during installation. Your system has not been modified.
    Please run the installer again, or click Finish to exit."

    I had the same problem.I tried every solutions on the net but nothing worked.Luckily on that very day my free avast antivirus date expired(I dont currently have a paid antivirus) and I uninstalled it.Then I tried to install itunes and did it on the first go.But I am using a windows 7 32 bit so it might not work for you as you are on the 64 bit.Actually the antivrus was the culprit.Hope it helps.Thanks

  • CannotUser execute task -- " anonymous " has not been assigned task

    Hi,
    I'm trying to build a prototype a workflow using WLI Integration(WLPI).
    I've created a workflow using WLPI Studio and am able to start the instances using
    JMS messages. However, when I try to execute one of the task which I 've assigned
    to user "admin" I get the following error. Please note that I have connected to
    WLPI using "admin" user only and got a handle to worklist. It seems to be an issue
    with security realm but I'm not able to figure out what it is...Can somebody help
    me on it???
    <Mar 26, 2003 5:46:55 PM EST> <Error> <BPM> <500212> <<wlpirequest>
    <started>2003-03-26 17:46:55.332</started>
    <requestor><anonymous></requestor>
    <templateid>1</templateid>
    <template-name>Test</template-name>
    <templatedefinitionid>1</templatedefinitionid>
    <instanceid>22001</instanceid>
    <actions>
    <error time="2003-03-26 17:46:55.362">WorkflowException: User "<anonymous>"
    has not been assigned task "Identify Samp
    les".</error>
    </actions>
    <completed>2003-03-26 17:46:55.372</completed>
    </wlpirequest>
    >
    User "<anonymous>" has not been assigned task "Identify Samples".
    User "<anonymous>" has not been assigned task "Identify Samples".

    Firstly Thanks for the response Chris.
    I'm not using any combination of older version of WLS and 7.0. I've downloaded
    the trial version of weblogic platform 7.0 and working on it.
    I forgot to mention one thing that in order to fix the problem I have modified
    the wlpi-ejb.jar to removethe method permissions.
    Chris Stead <[email protected]> wrote:
    Vinkal,
    Since I see the requester identified as <anonymous>, I am assuming you
    are trying some combination of inter operability between older versions
    of WLS and 7.0. If that is the case, the following link may provide
    some insight for your problem:
    http://edocs.bea.com/wls/docs70/upgrade/upgrade6xto70.html#1050157
    The only caveat is the fact that you are logged in as admin, which
    should be an authenticated user for BPM, therefore not represented by
    the guest user...Have you modified the permissions of the admin user?
    Specifically removed the Execute_Template permission from admin?
    Cheers,
    Chris
    Vinkal wrote:
    Hi,
    I'm trying to build a prototype a workflow using WLI Integration(WLPI).
    I've created a workflow using WLPI Studio and am able to start theinstances using
    JMS messages. However, when I try to execute one of the task whichI 've assigned
    to user "admin" I get the following error. Please note that I haveconnected to
    WLPI using "admin" user only and got a handle to worklist. It seemsto be an issue
    with security realm but I'm not able to figure out what it is...Cansomebody help
    me on it???
    <Mar 26, 2003 5:46:55 PM EST> <Error> <BPM> <500212> <<wlpirequest>
    <started>2003-03-26 17:46:55.332</started>
    <requestor><anonymous></requestor>
    <templateid>1</templateid>
    <template-name>Test</template-name>
    <templatedefinitionid>1</templatedefinitionid>
    <instanceid>22001</instanceid>
    <actions>
    <error time="2003-03-26 17:46:55.362">WorkflowException: User "<anonymous>"
    has not been assigned task "Identify Samp
    les".</error>
    </actions>
    <completed>2003-03-26 17:46:55.372</completed>
    </wlpirequest>
    User "<anonymous>" has not been assigned task "Identify Samples".
    User "<anonymous>" has not been assigned task "Identify Samples".

  • I am unable to download i tunes. After seemingly installing and looking like it was going to run, I got an error message that process could not be completed due to "system has not been modified".  Help!

    I am unable to download itunes due to an error message that popped up after installing (or so I thought) was completed. It said it could not complete the process because "system has not been modified". What?

    OK, can anyone explain how am I supposed to deal with this reply from apple? (I used a report a problem of a song purchase to ask why I can no longer access USA content)
    Quote
    Dear Darren,
    Greetings from iTunes Store Support. My name is Subramani and I am happy to assist you today.
    I understand that you are unable to make the purchases from your iTunes store account. I know how important this is for you and I am glad to provide you with the necessary information.
    Darren, you are not authorized to obtain content from the United States iTunes Store. We are unable to provide further information regarding this situation. I apologize for any inconvenience this has caused.
    For more information on Apple's requirements for using the iTunes Store, please refer to the iTunes Store Terms and Conditions:
    http://www.apple.com/legal/itunes/us/terms.html
    Thank you for being a valued iTunes Store customer. Have a nice day!
    Unquote
    Nice day? W-T-F?? They cannot tell me why I can't access USA content with my USA based account?
    Anyone?
    Thanks
    Darren

  • Logon is not possible because you have not been assigned to a business role; please contact your system administrator

    Hi experts,
    I'm having a problem when our project approaching the end.
    If I assigned the business role in parameter CRM_UI_PROFILE and PFCG role in SU01.
    It works fine,and the user can logon the web ui.
    Now I created a new organization model and position,assigned the business role and user to the position.
       A PFCG role was also assigned to the business role:
    Then I removed all the roles and profiles in user master in SU01.
    The user can not login CRM WEB UI and the system raised "Logon is not possible because you have not been assigned to a business role; please contact your system administrator".
    Can anybody suggest what the problem is? Is there any other settings I should make?
    I suppose that,since the user was assigned to the position the organizational model, the system can determine the user's business role, and through the business role, the corresponding PFCG role can also be determined.
    Am I correct?
    Thanks.
    Jerry

    Jerry, yes, you're right.
    Let me point you to pretty good explanation right here: Logon is not possible because you have not been assigned to a business role; please contact your system administrator
    So business role determination is taken in three steps (you can observe them in class CL_CRM_UI_PROFILE_DETERM method LOAD_PROFILES):
    1. From user's parameter  CRM_UI_PROFILE (method LOAD_FROM_USER_PARAMETER);
         If  CRM_UI_PROFILE = * then the user needs to have S_DEVELOP authorization object with OBJTYPE = 'DEBUG' (debug authorization).
    2. If not found on previous step: From organizational management (method LOAD_FROM_ORG_MANAGEMENT)
    3. If not found on previous steps: Based on PFCG roles (method LOAD_FROM_PFCG_ROLE);

  • I tried to install the icloud to my windows 7. pop up said the insaller encountered errors before icloud control panel 3.1 could be configured. it also said my system has NOT been modified ? can anyone help?

    i tried to install icloud to my windows 7 pc. a pop up said the installer encountered errors before icloud control panel 3.1 could be configured. it also said my system has not been modified.Any advise how to modify my system?

    Well.
    I reinstalled Win7 64bit, same issue.
    I installed Win7 32bit, installer doesn't run correctly.
    Got a second new laptop, running Win7 Starter edition, 32bit, installer doesn't run correctly.
    By run correctly I mean when you double click it, you get the busy cursor and some disk IO then nothing happens.
    So....When's the next release of Itunes out?
    Because the current one is a steaming pile of unworking crap.

Maybe you are looking for