LogicX Rec Problem. I can't hear while recording no matter I turn on Auto Input Monitoring at menu or channel. On certain songs I could thru AUX to REC, my L7/8/9 procedure. Now, inconsistent, not work. Any help?

Logic X Recording Problem
I can't hear (ex.) voice back while recording no matter I turn on Auto Input Monitoring at Record Menu or Channel Strip.
On certain old projects I could when thru AUX to REC, which was my L7/8/9 procedure.
Recording takes place on a consolidated session, all audio tracks with no latency, which actually happens only it can't be heard.
Monitoring is very inconsistent and in fact doesn't work at all. Any help?
Mac Pro 2010 2x2.66 12 Core  32GB OSX 10.9.5 SSD 480
Recording on HD 1TB, Fireface 800

Correction: actually "thru AUX to REC channel" is not effective.
It's just that I can input monitor thru an extra AUX channel independently of the REC channel.
Sending the source to be recordered to aux and audio rec at same time.
Mac Pro 2010 2x2.66 12 Core  32GB OSX 10.9.5 SSD 480
Recording on HD 1TB, Fireface 800

Similar Messages

  • Hello, delete all of my iphone 3G SHSH and now does not work. any help?

    hi, my iphone 3g not reading, accidentally delete all SHSH, i nedd help.

    If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
    If it's happening on all apps including Apple's, then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

    Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Downloaded ios6 to my ipod touch and lost all color when i select an artist or song how can i get to be blue again tried resetting did not work any help would be apprciated?

    just downloaded ios6 on my ipod touch and lost all color when I select an artist or song how can I get it to be blue again tried resetting did not work any help offered would be liked

    You need to restore.
    Everything should be on your computer, so you can just sync it back.
    iPod touch User Guide (For iOS 4.3 Software)

  • I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

    I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

    Activation issues are almost always the result of a device that has been hacked or jailbroken.  If that is the case, no support can be provided here.

  • My ipad mini and iphone 4s are not connecting over bluetooth. iphone cannot locate ipad mini or says it is not supported. It used to work perfectly but now its not working. please help.

    my ipad mini and iphone 4s are not connecting over bluetooth. iphone cannot locate ipad mini or says it is not supported. It used to work perfectly but now its not working. please help.

    Hi
    Thanks for the support but I had already tried this . Again did it as you advised. Still not able to connect the ipad mini with Bluetooth.
    Could it be that some app is causing issue. I can connect my car and computer over Bluetooth but not ipad mini.
    On the other had ipad is connecting to other iPhone but only not mine.
    Still showing ipad not supported message. And also shows not paired.
    Please help.

  • I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    Are you connecting your iPhone directly to your PC or to a USB hub?

  • I'm trying to reset my iPhone 4S but I have no internet as my wifi has broken and I have no data left, I have tried connecting to a computer which did not work any help would be grateful thanks

    I'm trying to reset my iPhone 4S but I have no internet as my wifi has broken and I have no data left, I have tried connecting to a computer which did not work any help would be grateful thanks

    A reset has nothing to do with Internet access or data access.
    A reset is simply pressing and holding the home and power buttons until the white Apple logo appears.
    What are you really trying to do?

  • So my home button stopped working due to water damage. I put it in the microwave(for real no joke) so the water can evaporate. 2 seconds in and the screen sparked blue and now its not working any suggestions on helping me fix it?

    Please help me guys itll be a great help

    Hey Peter, I think your missing the big picture. Your iPod is past repair, corrosion, is a real issue with water damage, but your problem took a turn for the worst when you attempted to use a microwave to dry it out. I see you found another post from July 2012, where someone else tried to nuke there iPod, and got the same results you have-- a dead iPod. The blue sparks, burnt smell and still not working all confirms one thing... Your iPod is not repairable. What the water didn't damage the microwave did. By attempting to microwave, you for all intensive purposes hit your iPod with an EMP, (Electro-Magnetic Pulse), in the first split second you overloaded the workings of your iPod and burned it up! There is is no way of known which circuits and components have been damaged and to what extend. You may be able to get a refurbished iPod, but it is unclear that Apple will allow it, because of the type of damage, it's not like this was an accident, you deliberately put it in the microwave in a misguided attempt to dry it out. when the microwave turned on it hit ever chip, diode, capacitor etc. with more power than it was designed to handle, in short; you baked it, burned it up, fried it, call it what you want, but it's not going to work! To attempt to repair is a meaningless gesture, (and probably will cost more than it's worth), chalk this one up as bad ideas 101-- learn from it, move on, and get yourself a new iPod. Hope this helps, Good luck. Cheers.

  • Disconnected ipod when said DO NOT DISCONNECT, now its not working.  help?

    I was in a rush and I disconnected the ipod from the dock (which is connected to the computer via the USB cord) even though the ipod had the red circle with the line through it saying “DO NOT DISCONNECT”. When I tried to use it afterwards, the screen was frozen with the “DO NOT DISCONNECT” screen blinking. I couldn’t even turn the ipod off. The battery ran out, and the ipod did eventually shut off a few hours later. When I then plugged it in to the roadtrip in my car to try and recharge it, the black and white apple screen appeared for a few seconds, then a screen with a sad ipod face and an exclamation point appeared with www.apple.com/support/ipod underneath it.
    When I got home, I plugged the ipod into the dock again, but itunes did not recognize that the ipod was plugged it. But when it was plugged into the dock, on the ipod screen there was a picture of a battery with a lightning bolt on the left side of it and a small part of the left side of the battery was filled in black. It did not blink or anything.
    I read online a few things I could try and I did try resetting the ipod, but it didn’t work, it just showed the black and white apple, then the www.apple.com/support/ipod screen. I even tried pressing the Select and Play button, and nothing happened. I also uninstalled/reinstalled itunes, but that didn't work. and since itunes won't recognize that the ipod is plugged in, i don't know what else to do.
    My computer does not even recognize that the ipod is plugged in either since nothing shows under “My Computer” regarding the ipod.
    hopefully, someone can help. if not, what do i do? can i send it in? if so how long does that take and how much does that cost?
    i'm kicking myself now for being so stupid!
    Jen
    iPod Photo 60 GB   Windows XP  

    I had this same problem but it ended up that my computer wouldnt do anything with my ipod. Load songs or anyhitng. I had to go next door to my neighbors and use there computer. Try it on another computer and if it still deosnt work try calling apple.

  • Trying to install Flash 11.5 on Mac OS X 10.6.8. Install completes but Flash does not work - any help?

    Hi, I was told I didn't have Flash 7 when trying to see something online (which I am sure was incorrent to begin with) so I followed the provided link to download Flash version 11.5. The download completed without problems but Flash doesn't seem to work at all. I have uninstalled, reinstalled and restarted. I don't know what to try next, any help would be much appreciated!

    Start here;
    http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.ht ml
    Also, never, never follow links for flash, codecs or plug-ins of any kind from websites that throw up these warnings - there's a high chance of the link being to a malware site.
    Always go directly to the vendor.

  • OS X Lion secondary click is not working, any help

    Since I`ve downloaded Lion, the secondary click does not work, I can´t even select it on the trackpad window

    More details needed.
    Are you using an Apple mouse or a 3rd party mouse? Can you enable it in System Preferences > Mouse? Can you Control + click and get the menu like you would when you use secondary click?

  • Vodadfone India 3G is not working on my iphone 5S. Tried manual network selection as suggest by others. still it is not working. any help is greatly appreciated

    Vodadfone India 3G is not working on my iphone 5S. Tried manual network selection as suggest by others. still it is not working. Any help is greatly appreciated

    Hello Tony Lobo
    Try out the article below for issues with connecting to cellular on your iPhone. 
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS2755
    Resolution
    Follow these steps for help troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
    Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
    Restart your iPhone.
    Make sure that your software is up to date:
    Check for a Carrier Settings Update: Tap Settings > General > About.
    Check for an iOS Software Update: Tap Settings > General > Software Update.
    Note: Some updates may require a Wi-Fi connection.
    Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
    If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Phone > SIM PIN.
    Try another location. If a different location works, but the original location still doesn't, contact your carrier to report the issue.
    Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
    Restore the iPhone as new.
    Contact your carrier to:
    Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
    Verify that there are no account-related blocks.
    Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
    If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare to troubleshoot further.
    Regards,
    -Norm G.

  • My iMessaging is not working, any help as to how to get it working again?

    All of my messages are being sent to other iPhone users as texts, and the Apple system statem shows that nothing is wrong, but it's not working. Anyone else?

    Not enough info in your post to help, such as your Messages settings and whether or not you have a data connection,  Have no idea what you mean by "Apple system statem" 

  • HT204587 iphone 5s finger print not working any help please

    hi
    the finger print has stopped working i have tried everything but nothing works please help.
    Thanks

    The iPhone comes with a 1 year warranty and 90 days of complimentary support. AppleCare + extends that as shown in: http://www.apple.com/support/products/iphone.html
    The following gives instructions for dealing with the forgotten passcode: http://support.apple.com/kb/ht1212

Maybe you are looking for

  • How to download a page in pdf or doc format

    Hi, I want to download a content of page in pdf or doc format through a button. How can I acheive it. I created a salary page and now want to download this page directly in pdf or doc format, how to do it. Using Peopltools 8.49 PS HRMS 9.0 plz help.

  • Error whilst installing XMLParser for PL/SQL

    Oracle 8.1.6, AIX While installing the java archive named xmlparserv2.jar, I constantly get the message: ORA-29547: Java system class not available: oracle/aurora/rdbms/Compiler can somebody tell me why? I've tried to check my classpatch in all the w

  • Plug ins for InDesign CS6 deleted in error. Now program won't load.

    Unable to download it again, because the Adobe web site shows my copy as "up to date."

  • FA/997 for Validation Error

    Hi All, I need some clarification on receiving the 997/FA for the Validation error that happens at the remote trading partner. Will the 997 payload contain the details of the error in it?? How will B2B interpret the FA as positive FA or negative FA?

  • Qmaster Compressor and Shared Storage

    I've got Qmaster working on my compressor encodes and everything is working fine. What I want to know is whether there is a way to cut out the extra copy of data for the encode. All of my machines in the cluster have the same shared storage mounted o