Login twice in same apex app by same user not possible

Hi,
In itself it is possible to login twice by same user in same appl.
But when using both apps on diff pages eachtime the user is prompted to login again.
Why is that and why cant'w we use the app twice by same user.
It is possible to use same app by same user twice
Thanks in advance,
Hugo

I think it is probably due to your cookie and the session state. I cannot use IE or FF to access the same application twice with the same id, otherwise if I do different searches or change pages, the sesiion in the other window gets confused and starts showing session state varibale from the other window. This is with two different windows (not tabs) of IE or FF running.
But, I can easily use IE, FF, and Chrome to access the same application with the same credentials, and everything will work as if I logged in with three different ids. I barely remember this 'problem' from 'the old days', and cookies had something to do with it. It "may" have been that the solution (in some cases, depending on what you and the app are doing), was during the authenication process that every app creates and uses a cookie with the same name.
Hope this helps some,
Bill Ferguson

Similar Messages

How to conf in Hyperion, so the system couldn't login with the same user

Hai.....
how to configure in Hyperion, so the system couldn't login with the same user id in different machine ? (could you please provide me with detail step by step ? )
rgds
uka fp

fane_j wrote:
Sally R. wrote:
Someone gave me a suggestion to go to the terminal and type in the following:
ls /Users/Shared/.*.so
This was published on MacWorld's site, and it's not a very good tip. Try this instead
ls -la /Users/Shared/*.so
Turns out I was wrong about that. Somebody else suggested something even more complicated and got this reply:
By bastion
Fri Feb 24 08:49:05 PST 2012
PeterSParker said
Your terminal statement has an extra "." in it that prevents it from working.
Also, you should add the options -alR to show what is happening, and to search subdirectories.
The revised command looks like this:
ls -alR /Users/Shared/*.so
The above is completely wrong. The command as shown in the article is appropriate.
The "." is not extra and doesn't prevent the command from working. It's specifying that you're listing files that start with a period and end with ".so" with anything in between being matched.
Because you're explicitly searching for things that start with "." you don't need the -a flag.
Because you only care about simple existence and not any metadata you don't need -l.
Because the files of interest are installed in /Users/Shared directly, and not subfolders thereof, you don't need -R.

Block simultaneous logins by the same user on wired 802.1x

Is it possible to block simultaneous logins by the same user, meaning is userX login on port gi1/0/1 and after that the same user (UserX) is trying to login on a different port, it will be blocked.

Sorry I did not read your original question correctly. So at the moment, you can only restrict the number of concurrent connections for users that are only going through the web authentication process. If you are using EAP-TLS, PEAP, etc, then there is no method to restrict those users from performing multiple authentications on the network.
Thank you for rating helpful posts!

Logged in twice as same user?

The computer that I am currently using is a Mac Pro with OS 10.4.11. Because it is a "community" office computer with multiple users, many of the settings get changed by people not knowing much about operating systems.
So here's the problem, someone using the computer over the weekend happened to get the computer logged in twice as the same user??? How do you disable one of the duplicate users? I've tried logging out of the duplicate user but can't get back into the system without logging back in as the same user, which in turn creates the duplicate user again... annoying! What is the solution. I've tried force-quitting & hard-rebooting the computer only to have the duplicate come back. Please, someone help

Even though it might look like it, there shouldn't be two identical accounts (I am guessing that the users do not have admin access to create or modify accounts). You can use the Accounts preference pane to see (or remove) the accounts.

Multiple logins from the same site not working with iCloud Keychain

Hello all,
I am trying to use the iCloud Keychain with my iPhone and iPad. I use a website that has two different logins, each with its own password. On Mavericks, I am able to select the correct username/password from my iCloud Keychain by pressing the "down" arrow in the username box.
However, with my iOS devices, I am unable to access multiple logins. It merely Autofills the most recently used combination on whichever device most recently visited the site.
Is there any way to get multiple login support working for an iOS device?
Thank you!

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js [2] and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js

Prevent multiple logins of the same user in portal

Hi Experts,
I have a requirement wherein I am needed to ensure that whenever a user tries to login to the portal, I should check whether this user already has a session active. If yes, I should not allow this user to login again. As in this user should not be able to login by opening a new browser window or by trying to login from some other system.
However if there are no existing sessions for this user then allow her/him to log in.
Is there any way I can achieve this by changing any parameters in Visual Admin / Config Tool or do I have to implement this functionality by making modifications in the masthead .par file?
Best Regards,
Saurabh Vakil.

Hi Saurabh,
you can do this by modifing the headerIview.jsp by using session variables.
when a user logs into portal you have to keep his details in a session and check them everytime when he tries to login again.if it is not the first time then throw and error message
you need to change the par file. code will be something like this
session.setAttribute("user",request.getUser());
if(session.getAttribute("user")!=null)
And for preventing from backend -
By changing the parameter - login/disable_multi_gui_login you can do this.
Check below sap link - http://help.sap.com/saphelp_erp2004/helpdata/en/22/41c43ac23cef2fe10000000a114084/frameset.htm
Regards,
Sen
Edited by: prodyut kumar sen on Dec 20, 2010 1:22 PM

Arranging apps on ipod touch not possible with itunes 9?

I spent some time at work today arranging the order of my apps on my ipod touch and got everything layed out how I liked. Then I came home tonight and synced my ipod with itunes 9 and all my apps have been re-arranged to match the order they are within iTunes. I assumed when you sync it would look to see which had the most recent changes, ipod or itunes and then sync in the right direction. If itunes always re arranges the order of the apps what's the point of being able to arrange them on the ipod if the changes are going to get lost next time you sync?
My other question is that i've deleted a few applications from my ipod but they don't get deleted from itunes. Therefore i'm always having to remember what i've deleted in the day so I can delete them from itunes as well. Is there anyway to get the ipod and itunes to sync so that they contain the same apps and therefore not having to delete apps twice?
Thanks

I rearranged my apps on my Touch and then synced it to iTunes to see what happened. When I ejected my Touch and checked my apps were still in the manner that I arranged them so the method you are having issues with works perfectly fine for me. Also, looking at the online manual about the syncing of apps it states:
+iTunes automatically syncs applications you’ve downloaded or purchased on iPod touch to your iTunes library when you connect iPod touch to your computer.+
+_This lets you access the downloads on your computer and provides a backup if you delete applications from iPod touch._+
Based on the underlined part it is my understanding that iTunes is not set up to delete the items from your library just because you deleted them from your Touch...it keeps the apps in the library as a backup until you delete it from iTunes so that's just the way it is. As for the apps arrangement issue...if you haven't already you may want to try reinstalling iTunes 9. Not sure if that would fix the issue or not though. And not sure if anyone else is having that issue since no one seems to be posting that they too have experienced the problem.

Toggling Location Services for apps to "While Using" not possible in iOS 8

So I've read one of the features in iOS 8 is being able to toggle the location services features of apps as follows:
Never
Always
While Using
I thought this would be useful because it could potentially help saving battery, however, I've only got the "Never" and "Always" options.
Only after opening an app have I found that the "Always" option switches to "While Using" , but then the "Always" option disappears. But this isn't true for all apps.
Is this an app specific "feature", then, as that's not how websites are labelling it.

Hello CCC,
It is happening on the following devices:
iPhone5
iPhone5s (two)
each have a "Family" generated iTunes account which has been associated to my iTunes account as the organizer. I would probably like to see it resolved on the iPhone5s (son and daughter) first and then the iPhone5 (wife).
2. I am also experiencing issues with "Mail" using IOS 8 in that email will not delete from my inboxes (same devices as above)...
3. I also have an issue with iCalendar not syncing events to my family members devices (iPhone5 and iPhone5S) using IOS 8. I entered my son's volleyball games into calendar on my macbook which is associated to my apple id as organizer and none of the other devices associated to other family iTunes account received the updates. I have an iPhone5 as well and I received the updates.
4. I am also experiencing issues with Family not recognizing pictures of family members which I have been trying to get fixed up.
I don't think I have ever experienced this many glitches when updating to a new version from Apple before:(. I sure hope this is not going to be the new norm.
I have also noticed that Health kit does not allow you to change the unit of measures within the application that it forces you to use the country's standard. This might be fine for younger individuals but as for me who grew up learning imperial and changed to metric halfway through school I would prefer the option to choose which unit of measure to use.
Thanks for taking the time to respond,
Dregor104

Can I merge multiple iPhoto libraries in the new Photo's app. This was not possible in iPhoto but is possible in Aperture.

Now that iPhoto is 'Photos' on 10.10.3 is it possible to merge multiple iPhoto libraries. It is possible to this this in Aperture but not in iPhoto (I'm using 10.10.2 and can't upgrade until other software I use is qualified for 10.10.3). Here's the deal - I changed my drive to an SSD and backed up my old hard drive (which had the original iPhoto library on it. I did a clean install with my new drive so iPhoto created a new (blank) library. This upgrade was done a few months ago so now I have 2 different iPhoto libraries. Note that the newer library is connected to iCloud and if I was to 'Switch Libraries' it will delete my current photo stream. There is a way to do this manually - I could switch to the old library and locate the root folders in the 'newer library', move them to a new folder and import. This procedure is awkward and not my preferred route. So if there's anyone using the new 'Photos' app on 10.10.3 please let me know thanks!

To merge the libraries manually use "File > Export".
To save the high quality originals, set the export panel like this, with "Kind Original":
If you have edited versions with added titles, caption, places, etc, use these export settings to save your work:

Task switching (APPLE+TAB) between apps and spotlight window not possible

Hi, I opened a spotlight window to search for some items by pressing ALTCMDSpace and ran my search query. Then I task switched to my other app to look at some info, but when I tried to task switch back to the open Spotlight window I was unable to do so. The only way to get back to it was either to Exposé or to press ALTCMDSpace again. Not a natural flow to the way I and most other people probably work. Is this normal/a feature? I am sure it wouldn't be hard for Apple to add the hook to show the Spotlight window in the Task List (CMD+TAB)

Hi, John.
Unfortunately, that's the way it works: You cannot Command-Tab to the Spotlight window. I see this as a design glitch, aka a "feature." As you note, it can be found using the Exposé "All Windows" (F9) function.
To let Apple know how you feel about this, I suggest you submit a Mac OS X Feedback. All Feedbacks are read and used to prioritize development investments.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

MULTIPLE LOGIN WITH SAME USER ID

Hi,
As per my understanding, multiple login to the portal with the same user id and password is allowed.
Now,
1. Is it possible to disbale this in the portal so that user can login to the portal only once?
2. Is it possible to allow specified no of logins with the same user id?
Any response is highly appreciated.
regards,
Chandra

What you're trying to do just doesn't work that well with any web application, let alone NW. There are various problems with trying to restrict the number of sign ons:
If a user signs into the portal and then walks away, they are unable to sign in again from another workstation. What if they want to give a demo to a user elsewhere in the company while they're still signed in at their desk? This is really just a user-issue, but an annoying one that will almost certainly drive certain users nuts.
What if the user's web browser crashes (an unfortunately common occurence). They can't sign in again until their session times out. Either that, or they call the portal admin to clear out their session (how? I don't know). The portal admin probably has better things to do than cleaning up orphan sessions.
If a user can't sign in multiple times, they can always open a related browser session, thereby having multiple entry points into the portal.
So, in short, you really can't enforce a 'sign in once' rule. By association, you therefore can't restrict them to a maximum number of sign-ins either...
Hope that helps you out. Points are always good

Restrict multiple log in with same user ID

I have a JSF Project where I use Oracle JAAS for Login.
The login works perfectly and also the components on the JSF page shows as per User Role. I am using OAS 10.1.3.3.
I want to now implement the code so as to restrict simultaneous logins with the same user id. That is a user id cannot be looged in at once to the server from more than one machine.
The login.html is:
<form name="loginFrm" method="post" action="j_security_check">
      <p>Log in to access restricted zone.</p>
      <table>
       <tr>
        <td>User name</td>
        <td>
         <input id="j_username" type="text" name="j_username"/>
        </td>
       </tr>
       <tr>
        <td>Password</td>
        <td>
         <input type="password" name="j_password"/>
        </td>
       </tr>
       <tr>
        <td> </td>
        <td>
         <input type="submit" value="Login" onclick="document.body.style.cursor='wait';"/>
        </td>
       </tr>
      </table>
     </form>The securityconfig int he web.xml file is:
<login-config>
      <auth-method>FORM</auth-method>
      <realm-name>jazn.com</realm-name>
      <form-login-config>
         <form-login-page>/login.html</form-login-page>
         <form-error-page>/loginError.html</form-error-page>
      </form-login-config>
    </login-config>
    <security-role>
      <role-name>ADMINISTRATOR</role-name>
    </security-role>
    <security-role>
      <role-name>MANAGER</role-name>
    </security-role>
    <security-role>
      <role-name>INSURER</role-name>
    </security-role>
    <security-role>
      <role-name>TRACKER</role-name>
    </security-role>
    <security-role>
      <role-name>INSURER_MANAGER</role-name>
    </security-role>

Then I would say it is not possible: Restrict multiple login in SAP Business Objects 4.0 SP6 for single user
multiple login disable in BO | SCN

Install Air App for All Users

Does air have an option to install the app across all users , not jus the current user?

It would seem like that article ''should'' solve the problem, but it doesn't seem to have had any effect. I extracted the contents of the .xpi file into the browsers\extensions folder using the extension ID, yet that doesn't seem to have done anything. I ran firefox after copying the uncompressed files with an administrator account with no luck. Any thoughts?

I would like to lock a particular block of apps and need a password just for that block of apps only. Is this possible?

I love to pass my iphone to the kids. My 20month old grandson can easily navigate from app to app and keep himself occupied.
However, there are certain apps I do not want him to open or accidentally delete.
How can I put a lock on only certain apps when I give him the phone.
I still want him to be able to go back and forth to other apps by himself.

No, not possible. But you can use Guided Access.
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=Guided%20Access

Login prompt appears for web app when sql db is not on same server as WebAp

Hi,
I am deploying a VS2005 web application on a server (which has crytalReportsviewer); lets call that server A. The database the crystal reports access are on a different server, server B. In this scenario, when I run the web application, and try to bring up the reports on the web page, I get login prompt. Even if I provide valid login credentials (I have set up a user for this purpose the behavior is erratic; for some reports the report is displayed and for others it errors out with 'unknown error' message.
If I put the sql db on the same server, it works fine.
I use the crystal reports application to update the database source. When I do this, I use Ole db connection and set the 'integrated security' to true. But setting the integrated security to true does not bypass the login screen on the web app.
My question is, how do I set up the report database parameters (connection string etc) so that the user of the web application does not have to go through the login screen when the web application and the sql db does not reside on the same server.
Thanks.

That sound like a [Double-Hop|http://blogs.msdn.com/knowledgecast/archive/2007/01/31/the-double-hop-problem.aspx] issue.
You'd install and configure Kerberos to hop over the credentials - see post: SQL Server 2005 integrated security.
Sincerely,
Ted Ueda

Login twice in same apex app by same user not possible

Similar Messages

Maybe you are looking for