Logo and text

Hi All
I want to change the logo based on authentication
If a user A belong to company ABC then logo should be ABC
if a user B Belong to company XYZ then logo should be XYZ
any suggestion how to do this , dynamic action ??? or page load process.
Thanks for your help in advance.

Hunk09 wrote:
Hi All
I want to change the logo based on authentication
If a user A belong to company ABC then logo should be ABC
if a user B Belong to company XYZ then logo should be XYZ
any suggestion how to do this , dynamic action ??? or page load process.There are a number of ways to do this. Neither dynamic actions nor page load processes would appear to be among the good ones.
If I was doing this I'd probably use a CSS approach based on classbodychanging <tt>class</tt> attributes on the page <tt>body</tt>. However that's relatively complicated, intended to provide the ability to completely customise the look and feel.
A simpler option is to create application items to hold the company-specific logo image and text information, and reference these in the standard logo attribute using static text substitution. (Set the Logo Type to "Text" as the logo image is included as an HTML element.)
<img src="#WORKSPACE_IMAGES#&COMPANY_LOGO_IMG." alt=""> &COMPANY_LOGO_TXT.Set the <tt>COMPANY_LOGO_IMG</tt> and <tt>COMPANY_LOGO_TXT</tt> application item values required for the user in a Post-Authentication procedure in the Authentication Scheme. This is an efficient location for such code as (1) it is run as soon as the user has been identified; and (2) it is run only once per session.

Similar Messages

I recently downloaded the latest version of Adobe Reader and when I try to open a new pdf I get the Adobe logo and text in Japanese and the pdf doesn't open. Any help would be appreciated.

I recently downloaded the latest version of Adobe Reader for my MacBook Air and now when I try to open a new pdf I get the Adobe logo and text in Japanese and nothing else. The pdf doesn't open. Any suggestions? I never had this problem until my cache was cleared and I had to re-install Adobe Reader. Any help would be appreciated.

Just to say I am having exactly the same issue on my MacBook Air. I can't remember what I did but after this happened a few times, and once I had clicked on the Japanese pop up, I managed to do something that now means I get the pop up in English, saying 'Adobe Reader blocked for this website'. When I click on it it asks me to trust the content and then I get a bar with the text in Japanese. Eventually the pdf does open. However it's very irritating that I have to trust every pdf individually which I never had to do before the latest upgrade, and I don't understand why I get messages in Japanese. I will be interested to see whatever answers other more technical people may provide!

Printing of a logo and text on business cards, paper, etc.

Dear reader(s),
Let me introduce myself; my name is Matthew Hennessy from the Netherlands and I mostly PhotoShop, Illustrate for a hobby (for the last 5 years).
In the past 5 years I have learned a lot when it comes to designing, but this isn't enough. A few weeks ago my boss asked me to design a new logo and new text, with the intention of using it on business cards, brief paper and envelopes.
Now here comes the part you have seen coming, I really need to know a few things about the printing process, and the settings necessary to make a 'print ready' file. I have already done some research, but still some things are very unclear to me. If any answers could be given to the following questions, that would be more than appreciated!
Questions:
1. Crop marks - I have seen a lot of tutorials on the internet where people refer to 'crop marks', why are these necessary? What are they? What are they used for? How can I set the preferences and how can I see if I use the 'crop marks' correctly?
2. Trim marks - I have seen a few people talking about this. Are 'trim marks' the same as 'crop marks'?
3. Bleeding - this is something I really try to figure out, and already did my best but I'm not getting any wiser! Example given of my problem:
I'm planning to (when this comes to an end), order business cards, brief paper and envelopes on Vistaprint (Dutch site). The preferred size is 1. 90mm x 52mm (complete document) or 2. 87mm x 49mm (cut off).
What is the difference between these two sizes? I suppose this has something to do with the bleeding, but what?
Now this is what confuses me, and I don't think I'm the only one:
3.1. I made a new document in Illustrator CS5, with the 'complete document' measurements 90mm x 52mm (300DPI, CMYK). Do I need to input bleeding before I push ok?
3.2. I made a new document in Illustrator CS5, with the 'cut off document' measurements 87mm x 49mm (300DPI, CMYK). Do I need to input bleeding before I push ok?
4. Is there a checklist or anything to do this perfectly? As you can imagine I don't want to mess this up.
Any help will be greatly appreciated, e-mail contact would be great too: [email protected]
Thank you for reading, I will be around to look for replies! Thanks again!
- Matthew

function(){return A.apply(null,[this].concat($A(arguments)))}
1. Crop marks - I have seen a lot of tutorials on the internet where people refer to 'crop marks', why are these necessary? What are they? What are they used for? How can I set the preferences and how can I see if I use the 'crop marks' correctly?
Forget so-called "Crop Marks." Crop Marks and Crop Region are Illustrator-specific terms. It's an Illustrator feature that creates a set of (grossly oversized) printable marks on the Artboard for the printing house to use as trim indicators and/or (depending on version) to define a region for output when you export the file in certain formats. Other programs in Illustrator's genre don't even have this feature because it's really not necessary. Historically, it was Illustrator's workaround for its lack of a proper bleed feature and single-page limitation. I never even use Illustrator's Crop Marks. If I want trim marks to print, I simply draw my own.
Trim marks is an industry term. Trim marks are short hairlines which align to the edges at which you want the paper to be trimmed after printing, but are placed outside the actual trim rectangular area so that they get trimmed away. In most projects destined for offset printing, it's a good practice to draw proper trim marks in the bleed area of the page. The print dialog also provides a Printer Marks feature that will cause trim marks (among other things) to print outside the Artboard. (You don't need to worry about that in this scenario.)
function(){return A.apply(null,[this].concat($A(arguments)))}
2. Trim marks - I have seen a few people talking about this. Are 'trim marks' the same as 'crop marks'?
So as explained above, Illustrator Crop Marks is an Illustrator feature commonly used to draw trim marks. I don't use that feature. It wastes space.
function(){return A.apply(null,[this].concat($A(arguments)))}
3. Bleeding - this is something I really try to figure out, and already did my best but I'm not getting any wiser! Example given of my problem:
Bleed is an industry term that simply means you want ink to print "right to the edge of the paper." That's not actually possible on a commercial offset press. So if the design requires "right to the edge of the paper" printing, you cheat: You print on a larger-than-final-size sheet, put trim marks to indicate the final size of the piece, and design so that anything that is supposed to "print to the edge" actually extends beyond those trim marks. Theoretically, if the physical processes of commercial printing were perfect, you could draw your design "just to" the trim. But paper expands and shrinks with humidity changes, Press sheets jog around a bit as they get picked up by the suction lifts and grippers and shoved and squished between the rollers. (It's a mechanical miracle that the process works at all, and has for over a century. A full-size CMYK offset sheetfed press is a marvelous piece of engineering.) After printing and drying the sheet is trimmed at the trim marks, and the artwork that extends beyond the trim marks is chopped off.
Typically in commercial offset printing, 1/8 inch of "extra artwork" beyond the trim is sufficient to allow for the inaccuracies of the process.
Now here's the thing: If you are working in the traditonal manner with a commercial printing house, you know the press size and sheet size that will be used for the project. You can do all kinds of things at the design stage to minimize unnecessary work at the printing house by "designing for the press sheet." For example, in the press houses with which I work, I would never deliver a business card project output file as a single-card image on a single-card-sized page. No conventional offset printer is going print business cards one-card-at-a-time on 3.5 x 2 inch sheets. They are going to "gang" (step & repeat) multiple images of the card on one press sheet.
Typically, I would know in advance the press sheet size that is going to be used and the necessary space for gripper and press sheet margins. I would set up the software page to the size of the press sheet and arrange multiple instances of the card in that space. I would draw my own trim marks for each card in the array. If the sheet size is such that it will result in alot of paper just going in the waste bin, I may design some other piece in the otherwise unused area (a bookmark or hangtag, for example) and thereby get an "almost free" second document out of the press run. If the cards is designed to be printed on both sides, I will often arrange the page to accommodate "work and turn" printing, wherein both sides of the card gets printing on one side of the sheet, the sheets are simply flopped over and run through the press again. That avoids the need for a second press setup.
But since everybody and his third cousin's nephew is now a "designer," many printing houses have set up "click & drag" printing solutions on the web. Such solutions make it "quick & easy" (not necessarily cheaper) for the neophyte and "idiot proof" for the printer by removing the above-described flexibility and designing "one size fits all" workflows. That's what you're chasing with the Vistaprint vendor.
function(){return A.apply(null,[this].concat($A(arguments)))}
I'm planning to (when this comes to an end), order business cards, brief paper and envelopes on Vistaprint (Dutch site). The preferred size is 1. 90mm x 52mm (complete document) or 2. 87mm x 49mm (cut off).
What is the difference between these two sizes? I suppose this has something to do with the bleeding, but what?
In the Vistaprint .ai template for design-your-own business cards I just downloaded to see what you're talking about, they have the artboard set to accommodate a design with bleed. You don't have to design bleeding elements, but the space is there if you do.
The AI Artboard (page) is 90 x 52 mm. Think of that as your bleed area. If there are elements in your design that you want to "print to the edge" of the finished card, draw them all the way to the edges of the Artboard. The printer is, in effect, telling you that if you do that, then you will be providing enough "extra" artwork to accommodate the inherent variances in the printing/triming process.
The (grossly overthick) 87 x 49mm red rectangle is the trim. So it effectively is the "trim marks". It represents the final card after it is trimmed down to final size. That's the size your cards will be when delivered. That roughly coresponds to the 3.5 x 2 inch dimensions that are considered the norm in the US. I don't know about what's the convention in Europe, but assuming it is the same as in the US, that's the size you want the cards to be. Business cards that are even slightly oversized usually end up in the trash can because they often don't fit pockets in card-carriers or plastic sleeves.
The (grossly overthick) blue rectangle is the so-called "safe area". That's nothing more than a suggested "safe design margin" between your artwork and the trim. The idea is that you are supposed to keep any elements of the design that you don't want to risk getting "too close" to the edges of the final piece--or even getting chopped off by the trim--within that rectangle. Magazines and newspapers are also fond of providing "safe area" in their add space specs. I ignore them. I know what kind of visual "margins" I want in my designs and I know when I am risking getting too close to the trim. But an amateur designer may think it brilliant to "make a title as big as possible" and actually crowd text almost right up against the trim (in other words, poor design). Then he gets upset when the normal variance in the printing/trimming process causes the text to actually get cut on some of the finished pieces. By providing that rectangle, the printer is telling you "Don't blame us if some of your artwork is too close to the trimmed edge if you place that artwork beyond this rectangle."
function(){return A.apply(null,[this].concat($A(arguments)))}
3.1. I made a new document in Illustrator CS5, with the 'complete document' measurements 90mm x 52mm (300DPI, CMYK). Do I need to input bleeding before I push ok?
3.2. I made a new document in Illustrator CS5, with the 'cut off document' measurements 87mm x 49mm (300DPI, CMYK). Do I need to input bleeding before I push ok?
In the "idiot proof" template that Vistaprint has provided, they are treating the Artboard size as the bleed, and the red rectangle as the trim. So there is no need for you to include trim or bleed marks in your design.
Just set up your AI document exactly as the template that Vistaprint provided. Better, actually use their document file and paste your artwork into it on the Layer named "Your Design". When arranging your artwork, leave the (poorly named) "Guides" Layer visible, but locked. Make any art elements (background fills, etc.) that you want to "print to the edge" of the finished card extend all the way to the Artboard edge. Keep all other design elements within the "safe margin" blue rectangle.
All this is explained, by the way, in the See Accepted File Types link on the Vistaprint site.
When done, delete the Layer named "Gudies." Deliver the file to the printer. I would not deliver the .ai file; I would deliver a PDF. If you insist on delivering as an .ai file, convert all text to paths (a practice I despise). If you deliver as PDF, simply choose File>Save A Copy... in Illustrator. In the resulting dialog, select Adobe PDF as the file type. In the next dialog, leave the top menu set to Illustrator Defaults, but set the compatibility popup to Acrobat 4 (PDF 1.3). That should be fine.
JET

Logo and text required in the same window adjacent to each other

Hi experts,
Kindly provide a solution to get logo and some text adjacent to each other inside a single window using SAP SCRIPTS.

pass th logo in to paint and add the text u want in to it.......
and make it as a image file ...
and use that image in ur script................
Regards
Anbu B

How do you apply 2 different types of page (first with large logo and 2nd/follow with small) in the same document?

i´m using pages 5.1 and i need 2 different types of page in 1 document: first page with large logo and second with a small one. in pages 09 was a option for different first page ...

that's not my problem, and I am unfortunately not a professional. Sorry.
In Pages09 there was an option "Different First Page" (like MS Word). I could create different pages (first and second) with two different logos and text boxes. If the document was opened, there was only one side with the large logo. during writing the small logo and the other text boxes appeared on the second page (and subsequent pages).
Unfortunately I miss this function. I mean the inclusion of items on a second page. However, this must not necessarily be active.

HT201401 I tunred my iPhone off and when I started it up is has "frozen" showing the apple logo and lines of text?

I turned my iPhone off and when I started it up is has "frozen" showing the Apple logo and several lines of text. Any thoughts?

Never mind... i figured it out!

Want to change company logo and address.

Hi all,
Here i have one Standard print report "SAPF130K" for customer or vendor balance conformation . But when i run this report this time i get logo of company "IDES HOLDING AG" and getting address of this company. but customer number and his address get properly but now i want to get my company logo place of this "ides holding ag" . For this i find many thing in SE71 tcode but i am still not able to change this logo and address so can u please kindly help me out how can i change this both.
Thanks in Advance.
Keyur

@ Anurag_N: This is not ALV, but SAP SCRIPT report.
Hello,
This standard report is using form F130_CONFIRM_01 for the printing purpose.
Please check in this form, how you can handle ur logo.
R u doing any config for printing this report for the form etc?
This text is coming from the window ADDRESS and the below inlude:
INCLUDE &T001G-TXTAB& OBJECT TEXT ID ADRS LANGUAGE &T001-SPRAS&, where &T001G-TXTAB& for me is coming as
ADRS_SENDER.
So, just add ur logo in the standard text ADRS_SENDER in SO10, you will c it in the sap script layout.
But, i am not sure how this variable &T001G-TXTAB& gets populated and if it will get changed for soem other value.
Edited by: Kanwardeep Singh Gill on Apr 9, 2010 12:30 PM
Edited by: Kanwardeep Singh Gill on Apr 9, 2010 12:35 PM

Mac Mini won't boot past Apple logo and spinning wheel

Hello,
I have a Mac mini (late 2009) running 10.8.2. Today, I tried to log into the computer. It accepted my username and password, but then the screen turned gray instead of logging in. I left it like that for about twenty minutes, then gave up on waiting and Ctrl-Command-Power rebooted it. It then wouldn't reboot: it gets to the Apple logo and spinning loading wheel, but won't go past there.
So I went into single-user mode and was able to access the HD fine. I ran a filesystems check using the recommended syntax (/sbin/fsck -fy, I think). It said that the volume looked okay, and that it had been modified. I took this as a good sign (that it had been repaired) and typed "reboot" to restart the machine. I held Command-Shift-V to perform a Verbose Safe Boot.
The computer makes no further progress after the following four lines:
vboxdrv: fAsync=0 offMin0x809 offMax=0x2bc3
VBoxDrv: version 3.2.12 r68302; IOCtl version 0x140001; IDC version 0x10000; dev major=34
VBoxFltDrv: version 3.2.12 r68302
VBoxAdpDrv: version 3.2.12 r68302
I'm assuming all the instances of "vbox" are in reference to Oracle's VirtualBox VM. I do have VirtualBox installed, but haven't used it in a while (months), so I don't see why it's suddenly causing a problem.
To clarify, the computer doesn't "hang" after these lines: I can still type text into the terminal. The entire log is being saved to /dev/console, so I could probably grab it from Single-User Mode if necessary.
Everything else seems to be working properly: even the wl0 drivers are loaded.
Does anyone have any suggestions about how to fix this, or at least disable VirtualBox so the computer can start?
Thanks!
WC

Cult of Mac post:
When the Apple Logo appears your Mac has found a valid system disk, and Mac OS X begins loading.
Apple Logo with Spinning Gear
Once the spinning gear appears the BSD kernel (Darwin) has assumed command and begins loading device drivers. Shortly thereafter it transfers command to the almighty (and controversial) launchd process. Such are the workings of UNIX.
What this means for us mortals is that when a Mac stalls at the Apple logo or the logo with a spinning gear, it probably has a corrupt Mac OS X installation. It may also be having trouble accessing an internal or external hardware component, but this is less-likely.
Rebooting your Mac in Safe Mode can sometimes get things working well-enough that a second, normal reboot then works normally Hold down the Shift key at startup to boot in Safe Mode. DiskWarrior is also worth a shot (this is by far my most used disk utility). If that doesn’t work, an Archive & Install may be needed.
Read more at http://www.cultofmac.com/50685/how-to-fix-common-mac-startup-problems-macrx/#CGI mG3jeGEBtysX1.99

A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?

A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?
I suggested contacting Compub in Nassau St as the info is priceless and worth the trouble of trying to regain?
Any thoughts? The poor lady is very distress

If she has backed up her iPhone she can replace that iPhone and set up the new iPhone from her backup.
You can put the iPhone that went into water into a plastic baggie with either new silica gel packets (preferred) or raw rice and let it sit for 4 - 5 days. After that time remove the phone and connect it to power for at least a half hour. While it is still connected to power reset it by holding down the power and hold button, wait for the Apple logo then let go of the buttons. Might take several tries. If it revives immediately back it up.

HELP! Fuzzy images and text in Muse

Hi
I am going to preface this post by admitting that I am a complete amateur, just trying to create a simple but work-able and professional looking website for my business.
I am new to Muse (previously used a similar program to create my sites) and have found navigating around the program quite easy. BUT my whole site looks fuzzy.. In 'design' mode and also when previewed (both in Muse and in browser).
I would really appreciate any help that you could give me. If there is a way to upload it to a temporary site for you to give me advice? Or if I can send the .muse file to someone to check for me?
Thank you very much in advance, I really appreciate it
Lauren
Here is a screen shot of the home master when previewed in Muse - you can see the logo, menu, background and text are all fuzzy...

Please click "Publish" enter a name for your site and click "OK". This will create a free temporary website on Adobe Business Catalyst. You can then post the URL for that site here for the community to look at.
A couple questions:
1) I expect you're on a Retina Mac?
2) Text appears to be images or System fonts? Whenever possible you want to use a Web Font. If none of the Web Font choices fit your need, then check the "Web Safe" fonts. If you still come up dry, then use a System font as a last resort. When using a system font Muse will convert it to an image. This will result in slower page load times in the browser and (in some cases) lower quality rendering of the type. Whenever possible, if you use a System font, you'll want to set the fill on the text frame to be opaque (a solid fill color, 100% opaque gradient or 100% opaque image that fills the complete text frame). If the text frame contains any transparent areas, then the image version of it will have lower quality anti-aliasing, edges, on the type.

Can I include a logo into text module in smart forms

Hi,
I want to know whether I can include a logo into text module or not in smart forms.
Pls some one assist me.
Regards,
Chandra

Hi,
No you cannot attach a logo in Text Module because it can store only text, and your logo is stored in presentation server so it cannot be used aywhere else.I hope your question is answered.
Regards.

Ringtones and text tones not working

I finally figured out on my own that I have to turn OFF Do Not Disturb for my Iphone 4 to alert me to calls or texts. I had it set for DNDisturb 10p-9a. It's 6:55p. I got sick of missing calls and texts. Why is DND messed up? This has been happening for about three days I guess.

Try doing a hard reboot of the iPhone
1. hold the power and home buttons down
2. you will see the "swipe to turn off" screen come up... KEEP HOLDING THE BUTTONS
3. The screen will go black (turn off)... KEEP HOLDING THE BUTTONS
4. A white Apple logo will appear on the screen, now you can release the buttons. Left the iPhone boot... should only take a couple minutes.

Only safari and text edit work

2 days ago my mac power cable was pulled out of the wall. When I turned the Mac Mini back on only programs such as Safari, Dashboard, and text edit worked. I can go to system preferences but that is all. All of my desktop icons have been deleted. itunes, iDVD, iCal, and others such as america online, and AIM do not work. When I shut the computer down and restart it a screen with a blinking folder with a question mark alternating with the mac logo appears and then starts up as normally. I do not have the CDs that came with the computer, is there anything i can do?

nbakidd5...
"I do not have the CDs that came with the computer, is there anything i can do?"
It is possible to call Apple and pay them their fee to have them to send you some replacements.
Forunately Apple isn't exactly like Microsoft requiring you to pay for a new retail version of their software.
...Ron

Logo and address

hello,
i want to add our logo and address in the standard report of purchase order, please let me know how to do the same and what are steps to followed.
please explain the entire details and steps and oblige.
thanks
suja

hi sujatha
*& Report ZSAMP_ALV_DISPLAY                                           *
REPORT zsamp_alv_display                       .
TYPE-POOLS: slis.
TABLES : t001,t005t.
TYPES : BEGIN OF struct1,
        bukrs LIKE t001-bukrs,
        butxt LIKE t001-butxt,
        land LIKE t001-land1,
        spras LIKE t001-spras,
        periv LIKE t001-periv,
        landx LIKE t005t-landx,
        numb(3) TYPE n,
        END OF struct1.
TYPES: BEGIN OF struct2,
       land1 LIKE t005t-land1,
       landx1 LIKE t005t-landx,
       END OF struct2.
TYPES: tab1 TYPE STANDARD TABLE OF struct1,
       tab2 TYPE STANDARD TABLE OF struct2.
DATA: itab1 TYPE tab1,
      itab2 TYPE tab2,
      itab_temp TYPE tab1,
      wa1 TYPE struct1,
      wa2 TYPE struct2,
      i_fieldcat TYPE slis_t_fieldcat_alv.
SELECT-OPTIONS: s_bukrs FOR t001-bukrs.
START-OF-SELECTION.
PERFORM get_data.
PERFORM enhance_data TABLES itab1.
itab_temp[] = itab1.
SORT itab_temp BY land.
DELETE ADJACENT DUPLICATES FROM itab_temp.
CLEAR itab_temp.
LOOP AT itab1 INTO wa1.
    READ TABLE itab2 INTO wa2 WITH KEY land1 = wa2-land1.
    IF sy-subrc = 0 .
      wa1-land = wa2-land1.
      MODIFY itab1 FROM wa1 TRANSPORTING landx WHERE land = wa2-land1.
    ENDIF.
ENDLOOP.
PERFORM alv_merge.
PERFORM fieldcat TABLES i_fieldcat.
PERFORM alv_display.
*&      Form GET_DATA
      text
--> p1        text
<-- p2        text
FORM get_data .
SELECT bukrs
          butxt
          land1
          spras
          periv FROM t001 INTO CORRESPONDING FIELDS OF TABLE itab1
           WHERE bukrs IN s_bukrs.
SELECT land1
         landx
          FROM t005t INTO CORRESPONDING FIELDS OF TABLE itab2
                  FOR ALL ENTRIES IN itab1 WHERE land1 = itab1-land.
ENDFORM.                    " GET_DATA
*&      Form ENHANCE_DATA
      text
--> p1        text
<-- p2        text
FORM enhance_data TABLES p_tab TYPE tab1 .
DATA wa_tab TYPE struct1.
LOOP AT p_tab INTO wa_tab.
    wa_tab-numb = sy-tabix.
    MODIFY p_tab FROM wa_tab TRANSPORTING numb.
ENDLOOP.
ENDFORM.                    " ENHANCE_DATA
*&      Form ALV_MERGE
      text
--> p1        text
<-- p2        text
FORM alv_merge .
*TABLES   P_I_FIELDCAT.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
   EXPORTING
     i_program_name               = sy-repid
     i_internal_tabname           = 'I_TAB1'
    I_STRUCTURE_NAME             =
    I_CLIENT_NEVER_DISPLAY       = 'X'
     i_inclname                   = sy-repid
    I_BYPASSING_BUFFER           =
    I_BUFFER_ACTIVE              =
     CHANGING
      ct_fieldcat                  = i_fieldcat
   EXCEPTIONS
     inconsistent_interface       = 1
     program_error                = 2
     OTHERS                       = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " ALV_MERGE
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
FORM alv_display .
DATA : returncode(200) .
DATA: BEGIN OF fields OCCURS 2.
          INCLUDE STRUCTURE sval.
DATA: END OF fields.
CLEAR fields.
fields-tabname     = 'RLGRAP'.
fields-fieldname   = 'FILENAME'.
fields-value       = p_file.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
      i_bypassing_buffer                = 'X'
      filename                = filestring
      write_field_separator   = ','
      i_grid_title                      = 'MERGE TABLES'
      it_fieldcat                       =   i_fieldcat
      i_callback_top_of_page            = 'F_HEADER'
       i_callback_program               =   sy-repid
    TABLES
      t_outtab                          = itab1
     EXCEPTIONS
     program_error                     = 1
     OTHERS                            = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form FIELDCAT
      text
--> p1        text
<-- p2        text
FORM fieldcat TABLES p_i_fieldcat TYPE slis_t_fieldcat_alv..
DATA: l_fieldcat TYPE slis_fieldcat_alv.
CLEAR l_fieldcat.
l_fieldcat-col_pos = 1.
l_fieldcat-fieldname = 'NUMB'.
l_fieldcat-seltext_l = 'SR.NO.'.
l_fieldcat-key = 'X'.
l_fieldcat-edit = 'X'.
APPEND l_fieldcat TO p_i_fieldcat.
CLEAR l_fieldcat.
l_fieldcat-col_pos = 2.
l_fieldcat-fieldname = 'BUKRS'.
l_fieldcat-ref_tabname = 'T001'.
l_fieldcat-ref_fieldname = 'BUKRS'.
l_fieldcat-edit = 'X'.
APPEND l_fieldcat TO p_i_fieldcat.
CLEAR l_fieldcat.
l_fieldcat-col_pos = 3.
l_fieldcat-fieldname = 'BUTXT'.
l_fieldcat-ref_tabname = 'T001'.
l_fieldcat-ref_fieldname = 'BUTXT'.
l_fieldcat-edit = 'X'.
APPEND l_fieldcat TO p_i_fieldcat.
CLEAR l_fieldcat.
l_fieldcat-col_pos = 4.
l_fieldcat-fieldname = 'LAND'.
l_fieldcat-ref_tabname = 'T001'.
l_fieldcat-ref_fieldname = 'LAND1'.
l_fieldcat-edit = 'X'.
APPEND l_fieldcat TO p_i_fieldcat.
CLEAR l_fieldcat.
l_fieldcat-col_pos = 5.
l_fieldcat-fieldname = 'SPRAS'.
l_fieldcat-ref_tabname = 'T001'.
l_fieldcat-ref_fieldname = 'SPRAS'.
l_fieldcat-edit = 'X'.
APPEND l_fieldcat TO p_i_fieldcat.
CLEAR l_fieldcat.
l_fieldcat-col_pos = 6.
l_fieldcat-fieldname = 'PERIV'.
l_fieldcat-ref_tabname = 'T001'.
l_fieldcat-edit = 'X'.
l_fieldcat-ref_fieldname = 'PERIV'.
APPEND l_fieldcat TO p_i_fieldcat.
CLEAR l_fieldcat.
l_fieldcat-col_pos = 7.
l_fieldcat-fieldname = 'LANDX'.
l_fieldcat-ref_tabname = 'T005T'.
l_fieldcat-ref_fieldname = 'LANDX'.
l_fieldcat-edit = 'X'.
APPEND l_fieldcat TO p_i_fieldcat.
CLEAR l_fieldcat.
ENDFORM.                    " FIELDCAT
*&      Form f_header
      text
--> p1        text
<-- p2        text
FORM f_header .
DATA: t_header      TYPE slis_t_listheader,
         wa_header     TYPE slis_listheader,
         t_line        LIKE wa_header-info,
         ld_lines      TYPE i,
         ld_linesc(10) TYPE c.
Title
wa_header-typ = 'A'.
wa_header-info = 'Purchase Requistion Report'.
APPEND wa_header TO t_header.
CLEAR wa_header.
Date
wa_header-typ = 'A'.
wa_header-info = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
               sy-datum+4(2) '.'
   sy-datum(4) INTO wa_header-info."todays date
APPEND wa_header TO t_header.
CLEAR: wa_header.
Total No. of Records Selected
DESCRIBE TABLE itab1 LINES ld_lines.
ld_linesc = ld_lines.
CONCATENATE 'Total No. of Records : ' ld_linesc
    INTO t_line SEPARATED BY space.
*T_LINE = 'Requisation Report,'.
wa_header-typ = 'A'.
wa_header-info = t_line.
APPEND wa_header TO t_header.
CLEAR: wa_header, t_line.
t_line ='Its my Report:'.
wa_header-typ = 'A'.
wa_header-info = t_line .
APPEND wa_header TO t_header.
CLEAR: wa_header, t_line.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = t_header
      i_logo             = 'HCL_LOGO'.
ENDFORM.                    " f_header
*&      Form f_top_list
      text
--> p1        text
<-- p2        text
FORM f_top_list .
FORMAT COLOR COL_HEADING ON.
WRITE: /10 text-h10, text-h09.
FORMAT COLOR OFF.
WRITE: /10 text-h11, sy-datum.
WRITE: /10 text-h12, sy-pagno.
ENDFORM.                    " f_top_list
*&      Form f_user_command
      text
--> p1        text
<-- p2        text
FORM f_user_command .
ENDFORM.                    " f_user_command
regards
kumar.

Remove one logo & some text in pdf page

Hi, i want to remove one logo & some text in pdf page, so i have used stamp tool & done it. my problem is after saving output pdf file size is very high. so pls tell me after editing how to save in pdf format & less file size.(without loosing image quality). my pdf page i have upload to bellow link (520 kb). thanks....
https://app.box.com/s/kn0g6kfs1pz4sjzfgmna

You can't. PS will always rasterize a PDF and as a result when saving you effectively save a pixel image that will almost always be larger than the original.
Mylenium

Logo and text

Similar Messages

Maybe you are looking for