Logo graphics not functional after installing LR5 Update today.

My logo function is not working for any of my graphics, only Logos using the normal text function is working.  Needed to post to my Blog today and this is a serious glitch!  Anyone having this problem also?

Paul, thanks for your  suggestions.  Regrettably, none of these procedures helped my problem. Interestingly I just installed the same update on my 3 year old iMac and that same screen came on and remained for an unusual amount of time.  It took an excessive amount of time to finally come back with running apps in place.  A recent update on my MacBook Air went on briskly.  I'm not sure what any of that means but there it is.  By the way - I let the old iMac run with that startup screen for over an hour thinking it may just be old and needs more time.  Being older myself, I felt it couldn't hurt.
Thanks.  I am not sure what the Genius Bar can do but it seems that is my next move unless someone comes up with a magic bullet out here.
Jerry H

Similar Messages

  • HT201366 CAC readers not working after installing security update 2013-003?

    Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

    For CAC issues, see:
    MilitaryCAC's Mac OS X support landing page
    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • Podcasts not downloading after installing iTunes update

    I just installed the new update, and now NONE of my podcast sources are downloading. I have tried rebooting, and got the same result. I have never before had all of my regular sources unavailable at the same time. Anyone else having this problem after installing the update on a Mac?

    ME TOO. Now I want to know how I can DOWNgrade iTunes.
    Also, when I have left iTunes open for a while, I come back to it, and the window is all indecipherable garbage.
    And don't waste your time. I have done it all, and nothing has helped. I either download podcast by painful podcast or I don't get anything at all.
    G4   Mac OS X (10.4.9)  

  • Exchange replication service not starting after installing Rollup update 3 v3

    Hi,
    I have installed rollup update 3 v3 for exchange 2010 sp1 on my mailbox server. This mailbox server is a DAG member. After installing update rollup, Microsoft exchange replication service on this server attempts to start & show status started for couple
    of seconds & then gets stopped. This behaviuor continues untill i uninstall this rollup. I have installed the same rollup on other DAG member as well with no problem. The following errors are generated in the application logs,
    Event ID 4096: The Microsoft Exchange Replication service failed to start the Tcp Listener. Please review the Event Log for more information. The system will attempt to start the service again in 30 seconds.
    Event ID 2121: The Microsoft Exchange Replication service failed to start the TCP listener. Error: System.Net.Sockets.SocketException: Only one usage of each socket address (protocol/network address/port) is normally permitted
    at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
    at System.Net.Sockets.Socket.Bind(EndPoint localEP)
    at Microsoft.Exchange.Cluster.Replay.TcpListener.StartListening()
    Event ID 4999:
    Watson report about to be sent for process id: 6000, with parameters: E12, c-RTL-AMD64, 14.01.0289.001, msexchangerepl, M.E.Cluster.Replay, M.E.C.R.ReplicaInstance.TargetGetCopyStatus, System.MethodAccessException, a379, 14.01.0289.001.
    ErrorReportingEnabled: True
    Event ID 2060: The Microsoft Exchange Replication service encountered a transient error while attempting to start a replication instance for DB1\SRV-MBX2. The copy will be set to failed. Error:
    The NetworkManager has not yet been initialized. Check the event logs to determine the cause.
    Event ID 2060:
    The Microsoft Exchange Replication service encountered a transient error while attempting to start a replication instance for DB2\SRV-MBX2. The copy will be set to failed. Error: The NetworkManager has not yet been initialized.
    Check the event logs to determine the cause.
    Thanks
    in Advance!!

    I hope you are following the best practice to install rollup on DAG. 
    Suspend activation for the databases on the server being updated.
    Perform a server switchover so that all databases on the server are passive copies. There will be a brief interruption in service for the mailboxes hosted on the active databases during the switchover process.
    Install the update rollup.
    Resume activation for the databases on the updated server.
    Perform database switchovers as needed.
    http://blogs.technet.com/b/scottschnoll/archive/2009/12/10/installing-update-rollup-1-for-exchange-2010-on-dag-members.aspx
    Thanks Uday Kiran,
    Senior Consultant
    Cyquent Technology Consultants, Dubai
    Please Mark as answer if it helps you

  • "Finder" does not function after installing Leopard on Mac G5

    After successfully installing Leopard on my (new) MacBook Pro and on my (old:2003) iMac PowerMac 6,1 I tried installing Leopard on my 2005 iMac G5.
    The installation seemed successful, but after restarting the computer I was asked to choose the wireless network from a list. This was not possible. I do not use the Airport on this computer so tried to press "cancel". Could not do this and got the turning rainbow circle which never stopped.
    *The Finder does not function and cannot be restarted. This seems to be the main problem.
    I cannot log off or shut down and have to use the powerbutton to shut down.
    When starting up I do not get the Startup sound. Do get login and can login. But, all my desktop buttons have disappeared and I immediately get a notice that OS X shut down unexpectedly, asking me to cancel or send a report. Neither of these options are possible and the turning rainbow reappears. It's driving me crazy!
    I can sometimes open programs but no longer "system preferences".
    Is there anybody out there who can help me??
    I am especially frustrated since the other two installations on an older and on a newer Mac went well. I use the exact same programs on all three computers.
    HELP!

    After successfully installing Leopard on my (new) MacBook Pro and on my (old:2003) iMac PowerMac 6,1 I tried installing Leopard on my 2005 iMac G5.
    The installation seemed successful, but after restarting the computer I was asked to choose the wireless network from a list. This was not possible. I do not use the Airport on this computer so tried to press "cancel". Could not do this and got the turning rainbow circle which never stopped.
    *The Finder does not function and cannot be restarted. This seems to be the main problem.
    I cannot log off or shut down and have to use the powerbutton to shut down.
    When starting up I do not get the Startup sound. Do get login and can login. But, all my desktop buttons have disappeared and I immediately get a notice that OS X shut down unexpectedly, asking me to cancel or send a report. Neither of these options are possible and the turning rainbow reappears. It's driving me crazy!
    I can sometimes open programs but no longer "system preferences".
    Is there anybody out there who can help me??
    I am especially frustrated since the other two installations on an older and on a newer Mac went well. I use the exact same programs on all three computers.
    HELP!

  • App updates are not removed after installing in update screen of iPhone and iPad

    Whenever there is an update for an app, the same is displayed in the update screen of the App Store in both iPhone and iPad. After downloading and installing the patch, the app is not removed from the update screen. In earlier iOS versions, the same gets removed and only the pending apps for update remain.
    Questions:
    Is this a bug?
    Will this not increase the update screen list of patch updates over time?
    Why are the updated patches not removed from the update screen?

    This is not a bug.
    The updated apps will start disappearing after about two weeks (on a first in first out basis)

  • Web Sharing not working after installing security update

    I have been using Web Sharing without problems for several months, but now, after installing the latest security update, my browser cannot find my server at macbook.local.
    The console error messages read:
    10/15/08 11:35:17
    AM org.apache.httpd644
    httpd: Syntax error on line 455 of /private/etc/apache2/httpd.conf: Syntax error on line 15 of /private/etc/apache2/extra/httpd-userdir.conf: Syntax error on line 8 of /private/etc/apache2/users/+entropy-php.conf: Cannot load /usr/local/php5/libphp5.so into server: dlopen(/usr/local/php5/libphp5.so, 10): no suitable image found. Did find:\n\t/usr/local/php5/libphp5.so: no matching architecture in universal wrapper
    10/15/08 11:35:17 AM
    com.apple.launchd[1]
    (org.apache.httpd644) Exited with exit code: 1
    I have read a number of other posts (and searched a bit on Google), but nothing I found seems to address this particular console error message.
    What should I do?

    This page fixed the problem. For me this is the part that I had to run:
    Problem 2: Apache is 64 bit, entropy is 32 bit.
    The only solution to this that I've seen is to force Apache to be 32 bit. For intel based machines:
    Code:
    sudo cp /usr/sbin/httpd /usr/sbin/httpd-fat
    sudo lipo /usr/sbin/httpd -thin i386 -output /usr/sbin/httpd
    that will strip everything except the 32 bit intel code from httpd (after making a backup), forcing it to be 32 bit. For PPC, the command will be similar.
    This fix is a bit tacky, but shouldn't cause any problems.
    After running this everything worked as normal. Thanks to everyone that helped.

  • Entry point not found after installing last update (itunes 11.1.4.62)

    itunes just prompted me to install an update, so I did.  Now I can not open iTunes at all.  I recive the following message:
    iTunes.exe - Entry Point Not Found
    The procedure entry point
    ?videoTracks@QTMovie@@QBE?AV?$Vector@VQTT
    rack@@@***@@$0A@VCrashOnOverflow@2@@***@@XZ
    could not be located in the dynamic link library :\Program Files
    (x86)\Common Files\Apple\Apple Application
    Support\WebKit.dll
    I have already tried to restart, and repair both iTunes and Apple Application Support.
    I had no problems prior to installing the latest update.  What can I do?

    iTunes.exe - Entry Point Not Found
    The procedure entry point
    ?videoTracks@QTMovie@@QBE?AV?$Vector@VQTT
    rack@@@***@@$0A@VCrashOnOverflow@2@@***@@XZ
    could not be located in the dynamic link library :\Program Files
    (x86)\Common Files\Apple\Apple Application
    Support\WebKit.dll
    Try the following user tip:
    iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes

  • Microphone does not function after installing Windows 7 RC on a HP Mini 1000 (1030NR)

    Hi. I recently purchased a HP Mini 1000 (1030NR) and upgraded it to Windows 7 Release Canidate. After install, I added the trackpad drivers, and everything else works fine except for the microphone. The computer recognizes it but when I speak nothing happens. The volume is turned up, and if I turn up the Mic Boost, all I hear is static. I have installed what I think are the correct drivers from another poster, to no avail. Also, there are no errors in the device manager. ANy ideas?
    Thank you in advance. 

    As a tempory measure search for SP40662 this package will enable the mic but there is a catch (isnt there always). The catch is that the mic is going to be recognized as the external one and if you plug in headphones you will have to reboot the mini to use the internal mic again. Im using the same set up right now and it works fairly well. Just hope that HP decides to bestow upon us the proper drivers for the mini soon.

  • Brand New 27" iMac i5 will not boot after installing software updates

    I just purchased my new iMac 2 nights ago. I have been getting it setup with my apps, mobile me account, etc, and luckily just setup time machine and let it do a full backup.
    I just ran Software Update for the first time, and now the machine will not boot. It hangs on the grey screen for about 1 minute before the Apple logo comes up. About 30 seconds after the Apple logo comes up, the grey spinning gear shows up, and about 1 minute after that I get the grey screen of death (You must restart your computer).
    Any suggestions? A little frustrated here....

    If you mean did I receive error messages, No, I didn't. However, the desktop reverted to the default purple night-sky looking thing, my applications and such all disappeared from the dock, and I couldn't open any files or folders (you don't have permission to ...), etc. I tried signing out and back in, rebooting, using a second admin account on the computer, creating a new admin account, etc. I ran Disk Utility, hardware checker, etc. No errors were found, and nothing changed. I could see all my files and folders, but they had a small red circle in the corner, indicating "locked" or "no permission".
    I'll find the lines from the console log if that will help. The error showed up immediately and is in the computer's attempt to access the user/library/application support/sync services and same path to user/library/logs/sync services/log. (or something reasonably close to this. If you can use the exact path, I will get it) The link between my settings and files, and a password is apparently corrupted or something, so that the computer won't even let me change the desktop or any file, so I can't save, edit or discard anything, and can't drag files to another computer on the home network.
    At least I'm still under the 90 day warranty, so I can call tomorrow. At this point, the SMART check says the drive is good, so I assume it's software. The only things new are the three auto Apple software updates I installed yesterday, so I immediately suspect them. But who knows?
    Does this help you at all?

  • Blank discs not recognized after installing security update

    Just installed the latest security update and now the computer will not recognize either blank CDs or DVDs. The first time I popped one into my external burner, I got the notice that I'd inserted a blank DVD and was asked if I'd like to open it in the finder (even though I had already set this as the default option). Then when I said yes, I got an error message that the disk could not be read. Ever since, I no longer get the notice, just the error message. Moreover, "drutil eject tray" will not eject the disk.
    Same thing happens with the internal drive. Again, drutil did not work and I had to restart to eject the disk.
    Disk Utility shows the disk but will not allow me to format it.
    These disks were working fine until I installed the security update.
    Anybody have any ideas?
    Thanks.

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
    May even need to do an Archive and Install if you have room on the HD...
    http://docs.info.apple.com/article.html?artnum=107120
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
    The combo update for Intel-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
    Repair Permissions afterwards, reboot.

  • K8t neo fis2r - core center not functional after installing sound card

    Hi.  I had been using Core Center with Dynamic Overclocking enabled and all was well.  When idle, my amd64 3000+ (2.0ghz), was running at 800mhz.  Under load it would go up to 2100mhz.  But yesterday, I installed an Auzentech x-plosion sound card and after i installed the driver, the dynamic overclocking stopped working, my cpu is running at max all the time.  (The variable fan speed function still works). 
    I checked the IRQ and there is no conflict, I uninstalled the amd64 driver and core center and reinstalled.  Still does not work.  I uninstalled the auzentech driver, rebooted, and cancelled new hardware wizard.  Then the variable cpu frequency feature worked.  Once I install the driver for the auzentech, dynamic oc stops working.  I was thinking to try another pci slot but it appears to be a software issue rather than a hardware issue.  The new version of Core Center does not work with my board even though msi says it's compatible so I'm still using the one that always worked.  The amd driver is the latest and also always worked.
    Has anyone else had a similar problem, perhaps using the auzentech sound card with this board and Core Center?  Or does anyone have any suggestions?
    Thanks!
    K8T Neo FIS2R
    AMD64 3200
    AMI bios version 2.2
    1.5Gb pc3200 memory
    nvidia quadro FX 1100 128mb AGP
    Antec 430W ps

    Hey guys, I just went to AMDs site to get the dashboard utility mentioned and in the readme, it stated that in XP, the power option needs to be set to portable/laptop.  But in the past, I read that it needed to be set to "always on" and that it is, in fact, what I had it set to before when cool n quiet was working.  Now I change it to "portable/laptop" and it works and set to "always on" doesn't work anymore.  So now Core Center reports I'm at 33c @800mhz at no load.   I don't get it???  I'll have to try an alternate utility just to verify that is indeed working.
    btw, QV, I checked system properties, (right-click my computer > properties, or "system" in control panel) and on the "general" tab, it indicates an AMD64 3000+, 2.0GHz.  But I'm pretty certain the clock frequency is dropping now as reported by core center because of the decrease in the cpu temp at idle.  Am I looking in the right place in XP?  I have XP pro, SP2
    Again, thanks for the input and Happy New Year  

  • Why will iTunes not start after installing latest updates on a windows computer?

    I got the usual notification that an update for iTunes on a windows 7 computer was available and told it to install
    It went through the motions and seemed to install,. but when I tried to open iTunes on completion I got the message below.
    I subsequently removed iTunes and reinstalled after manually removing various iTunes folders, then reinstalled iTunes with the same result of the error message so I removed iTunes again and installed an older version of iTunes which worked fine until yesterday I was notified of an update for the iCloud, which I installed and am back at square one with the same error message.
    I have tried to send an e-mail to Apple but they make it virtually impossible, so I would appreciate any advice anyone can give. I cannot be bothered with all this mucking avbout every time there is an upgrade
    Thanks, Mactoshb

    Hi, I carried out the advice and after reloading, Itunes is starting OK but I could not delete most of the files and folders mentione,d constantly getting the message that they were open in some unspecified program and to close it to continue, problem was I had no idea what the program was that they were open in.
    However I have Ashampoo uninstaller installed and it identified various programs associated with Apple and after uninstalling them I reinstalled iTunes and it is working fine now.
    Question, am I going to get this cobblers every time Apple offer an upgrade?????
    Anyway thanks for your help and hopefully this posting will help others, as I doubt I am unique and others will have the same problem, Time perhaps Apple sorted it out
    Boyd

  • HT6030 New messages still do not work after installing this update.

    Opening a new message, opens the new message window, however, it will not select a recipient and the window stops responding.

    Opening a new message, opens the new message window, however, it will not select a recipient and the window stops responding.

  • Sound not working after installing security update

    I went into the Audio panel in System Preferences, but it says there is no output device.

    Reset the PRAM. It contains files relating to audio out.
    http://support.apple.com/kb/HT1379?viewlocale=en_US

Maybe you are looking for