Logo in selection screen
hi experts ,
can we add logo in selection screen .
if yes the how it can be possible .
Thanks And Regards .
Priyank
To create a logo u have to remember one thing is u have to upload that logo through OAER or SE78
for uploading logo in OAER
Enter class name as PICTURES
Class type as OT
Object key the name of ur logo want to upload
then press F8 or execute
Then it will automatically creates a folder for ur LOGO and upload ur logo in that folder
After that In the left side bottom of the page u can c the following options
1)Detail
2)Document Info
3)Keywords
4)Create
goto Detail in which u can find the Object Id
which u have to paste in the function module of this program
Check this program1
REPORT YMS_LOGOSEL.
*REPORT ZREPORT_LOGO.
DATA:
docking TYPE REF TO cl_gui_docking_container,
picture_control_1 TYPE REF TO cl_gui_picture,
url(256) TYPE c .
DATA : sum(4) , num1(4) , num2(4).
PARAMETERS: p_dummy(4) DEFAULT '4' .
PARAMETERS: p_dummy1(4) DEFAULT '5' .
AT SELECTION-SCREEN OUTPUT.
PERFORM show_pic.
START-OF-SELECTION.
num1 = p_dummy.
num2 = p_dummy1.
sum = num1 + num2.
WRITE : / sum.
*& Form show_pic
FORM show_pic.
DATA: repid LIKE sy-repid.
repid = sy-repid.
CREATE OBJECT picture_control_1 EXPORTING parent = docking.
CHECK sy-subrc = 0.
CALL METHOD picture_control_1->set_3d_border
EXPORTING
border = 5.
CALL METHOD picture_control_1->set_display_mode
EXPORTING
display_mode = cl_gui_picture=>display_mode_stretch.
CALL METHOD picture_control_1->set_position
EXPORTING
height = 100
left = 500
top = 10
width = 300.
CALL METHOD picture_control_1->load_picture_from_url
EXPORTING
url = 'c:/pic.bmp'.
IF sy-subrc NE 0.
ENDIF.
ENDFORM. "show_pic
Similar Messages
-
Show Picture/logo on Selection Screen from OAER
HI everybody,
I uploaded a LOGO via TA OAER.
It works fine, when I Use call function 'REUSE_ALV_GRID_DISPLAY'
But now I want wot display the logo on the selection screen using the picture_control ( TYPE REF TO cl_gui_picture)
see:
ABAP - Display LOGO On Selection Screen.</title><title>Learn ABAP Programming With Examples And Sample Progr…
Does anybody know how to read the picture uploaded in OAER for using it in the picture_control ( TYPE REF TO cl_gui_picture?
Thanks
Regards
MarioThis is possible. please try following code:
PARAMETERS:c1 TYPE vbak-vbeln.
AT SELECTION-SCREEN OUTPUT.
PERFORM show_picture.
**& Form show_picture
FORM show_picture.
DATA picture_control_1 TYPE REF TO cl_gui_picture.
DATA :
docking TYPE REF TO cl_gui_custom_container,
logical_system LIKE bapibds01-log_system,
v_class LIKE bapibds01-classname,
v_type LIKE bapibds01-classtype,
v_client LIKE bapibds01-client,
v_objkey LIKE bapibds01-objkey,
url_lifetime LIKE bapibds01-uri_life,
standard_url_only LIKE sy-datar,
data_provider_url_only LIKE sy-datar,
web_applic_server_url_only LIKE sy-datar,
url_used_at TYPE sdok_fburl,
URIS TYPE TABLE OF BAPIURI WITH HEADER LINE,
url LIKE uris-uri.
v_objkey = 'FITP_SMILE'.
v_class = 'PICTURES'.
v_type = 'OT'.
v_client = sy-mandt.
CALL FUNCTION 'BDS_BUSINESSDOCUMENT_GET_URL'
EXPORTING
classname = v_class
classtype = v_type
client = v_client
object_key = v_objkey
TABLES
uris = uris.
* Find image
LOOP AT uris.
SEARCH uris-uri FOR 'smile.gif'.
IF sy-subrc = 0.
url = uris-uri.
EXIT.
ENDIF.
ENDLOOP.
BREAK-POINT.
CREATE OBJECT picture_control_1
EXPORTING
parent = docking.
CHECK sy-subrc = 0.
CALL METHOD picture_control_1->set_3d_border
EXPORTING
border = 5.
CALL METHOD picture_control_1->set_display_mode
EXPORTING
display_mode = cl_gui_picture=>display_mode_stretch.
CALL METHOD picture_control_1->set_position
EXPORTING
height = 55
left = 750
top = 08
width = 350.
CALL METHOD picture_control_1->load_picture_from_url
EXPORTING
url = url.
ENDFORM.
Regards -
How to Place a LOGO on Selection screen & Output list -OO ALV
Hi,
I was just wondering can we place a logo on standard Selection screen 1000?
And also on the Output list . I am using OO ABAP for my ALV.
regards
PraveenHi,
You cannot place a logo in your selection-screen.
But yes, you can place logos in your OO ALV.
data: ws_c_logo TYPE REF TO cl_dd_area.
"Instance for the logo
Split your document container for logo
CALL METHOD wcl_docum->vertical_split
EXPORTING split_area = wcl_docum
split_width = '70%'
IMPORTING right_area = ws_c_logo.
then,
CALL METHOD ws_c_logo->add_picture
EXPORTING picture_id = c_logo.
where: c_logo TYPE sdydo_key VALUE 'CC0040' . "logo for co.code 0040
The image should be stored in your business document. You may use BDS_OBJECT_SAVE or BDS_BUSINESSDOCUMENT_CREATEF to store the image in the business document server and then retrieve in your ALV.
Regards
Subramanian -
Adding Logo In selection screen
Hi,
I would like to add company logo in the selection screen of a web report. Please let me know how to do this.
Regards,Hi Bill,
Customizing for the variable acreen in the web reports has not been provided for by SAP. It will be possible by modification. You can refer to these 2 posts by an SAP Developer (Heike Guder):
Web Template: Customizing Variable Screen
BeX Web App - Variable Screen
Hope this helps... -
Adding image/logo on selection screen
How can I add image or logo on my selection - screen??
Hi,
in AT-SELECTION-OUTPUT EVENT put these codes:
data: lv_docking type ref to cl_gui_docking_container,
lv_picture_control_1 type ref to cl_gui_picture,
lv_url(256) type c ,
li_query_table type w3query occurs 1 with header line,
li_html_table type w3html occurs 1,
lv_return_code type w3param-ret_code,
lv_content_type type w3param-cont_type,
lv_content_length type w3param-cont_len,
li_pic_data type w3mime occurs 0,
lv_pic_size type i.
refresh :li_query_table ,li_html_table , li_pic_data.
clear :
lv_url,
lv_return_code,
lv_pic_size,
lv_picture_control_1,
lv_docking,
lv_content_type,
lv_content_length.
create object lv_picture_control_1
exporting
parent = lv_docking.
check sy-subrc = 0.
call method lv_picture_control_1->set_3d_border
exporting
border = 5.
call method lv_picture_control_1->set_display_mode
exporting
display_mode = cl_gui_picture=>display_mode_stretch.
call method lv_picture_control_1->set_position
exporting
height = 75
left = 1200
top = 250
width = 250.
if lv_url is initial.
refresh li_query_table.
li_query_table-name = '_OBJECT_ID'.
*IMAGE UPLOADED IN SWO0
li_query_table-value = 'ZLOGO'.
append li_query_table.
call function 'WWW_GET_MIME_OBJECT'
tables
query_string = li_query_table
html = li_html_table
mime = li_pic_data
changing
return_code = lv_return_code
content_type = lv_content_type
content_length = lv_content_length
exceptions
object_not_found = 1
parameter_not_found = 2
others = 3.
if sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
call function 'DP_CREATE_URL'
exporting
type = 'image'
subtype = cndp_sap_tab_unknown
size = lv_pic_size
lifetime = cndp_lifetime_transaction
tables
data = li_pic_data
changing
url = lv_url
exceptions
others = 1.
endif.
call method lv_picture_control_1->load_picture_from_url
exporting
url = lv_url. -
iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
How to attach a logo to a selection screen?
I needed to show the logo on the selection screen of a report.
So I went through several postings on this topic, created and uploaded the logo via OAER against the PICTURES object.
Per the posting, it tells to pass the value C:\logo.gif' as the url
I did so - but the logo does not appear on the screen.
So I went thorugh some demo programs - the demo programs are looking for entries in wwwparams table and are hard coding the object id while fetching these entries.
I looked for my entry in the wwwparams table, but nothing got updated into this.
Let me know if I am missing anything..
Thanks,
VenHi,
Please check this thread..
Picture in selection screen
THanks
Naren -
Adding logo/image on selection screen
How can I add logo or image on my selection screen??? or else use a picture as a background on the selection screen??
P.S : I have already searched the forum and have not got any suitable answer..most of them are about adding image on module pool screen..but I want it in my selection screen???Hi ,
Try like this
AT SELECTION-SCREEN OUTPUT.
PERFORM show_pic.
**& Form show_pic
FORM show_pic.
CREATE OBJECT picture_control_1 EXPORTING parent = docking.
CHECK sy-subrc = 0.
CALL METHOD picture_control_1->set_3d_border
EXPORTING
border = 5.
CALL METHOD picture_control_1->set_display_mode
EXPORTING
display_mode = cl_gui_picture=>display_mode_stretch.
CALL METHOD picture_control_1->set_position
EXPORTING
height = 55
left = 750
top = 08
width = 350.
CALL METHOD picture_control_1->load_picture_from_url
EXPORTING
url = 'C:\zpic.gif'.
*here you give the path where your pic is stored on the desktop
IF sy-subrc NE 0.
ENDIF.
ENDFORM.
Regards,
Nandha -
Hi Folks,
In an report it is possible to have the company logo on the selection screen?If so,let me know how.
Thanks,
K.Kiran.Hi kiran
To create a logo u have to remember one thing is u have to upload that logo through <b>OAER</b> or <b>SE78</b>
for uploading logo in OAER
Enter class name as<b> PICTURES</b>
Class type as <b>OT</b>
Object key the name of ur logo want to upload
then press F8 or execute
Then it will automatically creates a folder for ur LOGO and upload ur logo in that folder
After that In the left side bottom of the page u can c the following options
<i><b>1)Detail
2)Document Info
3)Keywords
4)Create</b></i>
goto Detail in which u can find the <b>Object Id</b>
<i><b>which u have to paste in the function module of this program</b></i>
Check this program1
*& Report ZREPORT_LOGO *
REPORT ZREPORT_LOGO.
DATA:
docking TYPE REF TO cl_gui_docking_container,
picture_control_1 TYPE REF TO cl_gui_picture,
url(256) TYPE c .
DATA : sum(4) , num1(4) , num2(4).
PARAMETERS: p_dummy(4) DEFAULT '4' .
PARAMETERS: p_dummy1(4) DEFAULT '5' .
AT SELECTION-SCREEN OUTPUT.
PERFORM show_pic.
START-OF-SELECTION.
num1 = p_dummy.
num2 = p_dummy1.
sum = num1 + num2.
WRITE : / sum.
*& Form show_pic
FORM show_pic.
DATA: repid LIKE sy-repid.
repid = sy-repid.
CREATE OBJECT picture_control_1 EXPORTING parent = docking.
CHECK sy-subrc = 0.
CALL METHOD picture_control_1->set_3d_border
EXPORTING
border = 5.
CALL METHOD picture_control_1->set_display_mode
EXPORTING
display_mode = cl_gui_picture=>display_mode_stretch.
CALL METHOD picture_control_1->set_position
EXPORTING
height = 100
left = 500
top = 10
width = 300.
CALL METHOD picture_control_1->load_picture_from_url
EXPORTING
url = 'c:/pic.bmp'.
IF sy-subrc NE 0.
ENDIF.
ENDFORM. "show_pic
<b><u>Check this program 2</u></b>
program zsap_picture_demo.
set screen 200.
TYPE-POOLS cndp.
* CLASS c_event_receiver
* DEFINITION
class c_event_receiver definition.
* The class is used to test the events raised by the cl_gui_picture
* class
public section.
methods event_handler_picture_dblclick
for event picture_dblclick of cl_gui_picture
importing mouse_pos_x mouse_pos_y sender.
methods event_handler_context_menu
for event context_menu of cl_gui_picture
importing sender.
methods event_handler_context_menu_sel
for event context_menu_selected of cl_gui_picture
importing fcode sender.
endclass.
* DATA
data function like sy-ucomm. " OK-Code field in screen 200
data url type cndp_url. " URL-field in screen 200
data url2 type cndp_url. " URL-field in screen 200
data picture_control_1 type ref to cl_gui_picture.
data picture_control_2 type ref to cl_gui_picture.
data container_1 type ref to cl_gui_custom_container.
data container_2 type ref to cl_gui_custom_container.
data event_receiver type ref to c_event_receiver.
data event_tab type cntl_simple_events.
data event_tab_line type cntl_simple_event.
data return type i.
* PBO
* before_output
module before_output output.
set pf-status 'MAIN0001'.
IF PICTURE_CONTROL_1 IS INITIAL.
* Create controls
create object container_1
exporting container_name = 'PICTURE_CONTROL_1'.
create object container_2
exporting container_name = 'PICTURE_CONTROL_2'.
CREATE OBJECT PICTURE_CONTROL_1 exporting parent = container_1.
CREATE OBJECT PICTURE_CONTROL_2 exporting parent = container_2.
* Register the events
EVENT_TAB_LINE-EVENTID = CL_GUI_PICTURE=>EVENTID_PICTURE_DBLCLICK.
append EVENT_TAB_LINE to EVENT_TAB.
EVENT_TAB_LINE-EVENTID = CL_GUI_PICTURE=>EVENTID_CONTEXT_MENU.
append EVENT_TAB_LINE to EVENT_TAB.
EVENT_TAB_LINE-EVENTID = CL_GUI_PICTURE=>EVENTID_CONTEXT_MENU_SELECTED.
append EVENT_TAB_LINE to EVENT_TAB.
CALL METHOD PICTURE_CONTROL_1->SET_REGISTERED_EVENTS
exporting
EVENTS = event_tab.
CALL METHOD PICTURE_CONTROL_2->SET_REGISTERED_EVENTS
exporting
EVENTS = event_tab.
* Create the event_receiver object and set the handlers for the events
* of the picture controls
create object event_receiver.
set handler event_receiver->event_handler_picture_dblclick
FOR PICTURE_CONTROL_1.
set handler event_receiver->event_handler_context_menu
FOR PICTURE_CONTROL_1.
set handler event_receiver->event_handler_context_menu_sel
FOR PICTURE_CONTROL_1.
set handler event_receiver->event_handler_picture_dblclick
FOR PICTURE_CONTROL_2.
set handler event_receiver->event_handler_context_menu
FOR PICTURE_CONTROL_2.
set handler event_receiver->event_handler_context_menu_sel
FOR PICTURE_CONTROL_2.
* Set the display mode to 'normal' (0)
CALL METHOD PICTURE_CONTROL_1->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL.
CALL METHOD PICTURE_CONTROL_2->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL.
* Set 3D Border
CALL METHOD PICTURE_CONTROL_1->SET_3D_BORDER
exporting border = 1.
CALL METHOD PICTURE_CONTROL_2->SET_3D_BORDER
exporting border = 1.
* new async implementation since 4.6C
CALL FUNCTION 'DP_PUBLISH_WWW_URL'
EXPORTING
OBJID = 'HTMLCNTL_TESTHTM2_SAP_AG'
LIFETIME = cndp_lifetime_transaction
IMPORTING
URL = url
EXCEPTIONS
OTHERS = 1.
* Load the picture by using the url generated by the data provider.
if sy-subrc = 0.
CALL METHOD PICTURE_CONTROL_1->LOAD_PICTURE_FROM_URL_ASYNC
exporting url = url.
endif.
CALL FUNCTION 'DP_PUBLISH_WWW_URL'
EXPORTING
OBJID = 'DEMOWORD97SAPLOGO'
LIFETIME = cndp_lifetime_transaction
IMPORTING
URL = url2
EXCEPTIONS
OTHERS = 1.
* load image
if sy-subrc = 0.
CALL METHOD PICTURE_CONTROL_2->LOAD_PICTURE_FROM_URL_async
exporting url = url2.
endif.
endif.
endmodule.
* PAI
* after_input
module after_input input.
case function.
* At the end of the program destroy the control
when 'BACK'.
CALL METHOD container_1->FREE.
CALL METHOD container_2->FREE.
leave to screen 0.
* Change the display mode
when 'NORMAL'.
CALL METHOD PICTURE_CONTROL_1->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL.
CALL METHOD PICTURE_CONTROL_2->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL.
when 'STRETCH'.
CALL METHOD PICTURE_CONTROL_1->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_STRETCH.
CALL METHOD PICTURE_CONTROL_2->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_STRETCH.
when 'FIT'.
CALL METHOD PICTURE_CONTROL_1->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT.
CALL METHOD PICTURE_CONTROL_2->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT.
when 'NORMAL_CTR'.
CALL METHOD PICTURE_CONTROL_1->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL_CENTER.
CALL METHOD PICTURE_CONTROL_2->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL_CENTER.
when 'FIT_CTR'.
CALL METHOD PICTURE_CONTROL_1->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT_CENTER.
CALL METHOD PICTURE_CONTROL_2->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT_CENTER.
* Clear the picture
when 'CLEAR'.
CALL METHOD PICTURE_CONTROL_1->CLEAR_PICTURE.
* Load a new picture
when space.
CALL METHOD PICTURE_CONTROL_1->LOAD_PICTURE_FROM_URL
exporting url = url
importing result = return.
call method cl_gui_cfw=>flush.
if return = 0.
url = text-000.
endif.
endcase.
clear function.
endmodule.
* CLASS c_event_receiver
* IMPLEMENTATION
CLASS C_event_receiver implementation.
* CLASS c_event_receiver
* METHOD event_handler_picture_dblclick
METHOD EVENT_HANDLER_PICTURE_DBLCLICK.
* for event picture_dblclick of c_picture_control
* importing mouse_pos_x mouse_pos_y.
DATA pos_x(5) type c.
DATA pos_y(5) type c.
pos_x = mouse_pos_x.
pos_y = mouse_pos_y.
IF SENDER = PICTURE_CONTROL_1.
MESSAGE I000(0K) WITH
'DoubleClick' 'Upper Picture' POS_X POS_Y. "#EC NOTEXT
else.
MESSAGE I000(0K) WITH
'DoubleClick' 'Lower Picture' POS_X POS_Y. "#EC NOTEXT
endif.
endmethod.
* CLASS c_event_receiver
* METHOD event_handler_context_menu
METHOD EVENT_HANDLER_CONTEXT_MENU.
data menu type ref to cl_ctmenu.
create object menu.
call method menu->ADD_FUNCTION exporting
fcode = text-001
TEXT = TEXT-001.
call method menu->ADD_FUNCTION exporting
FCODE = TEXT-002
TEXT = TEXT-002.
call method menu->ADD_FUNCTION exporting
FCODE = TEXT-003
TEXT = TEXT-003.
call method menu->ADD_FUNCTION exporting
FCODE = TEXT-004
TEXT = TEXT-004.
call method menu->ADD_FUNCTION exporting
FCODE = TEXT-005
TEXT = TEXT-005.
CALL METHOD SENDER->DISPLAY_CONTEXT_MENU
EXPORTING CONTEXT_MENU = MENU.
endmethod.
* CLASS c_event_receiver
* METHOD event_handler_context_menu_sel
METHOD EVENT_HANDLER_CONTEXT_MENU_sel.
DATA DISPLAY_MODE TYPE I.
IF FCODE = TEXT-001.
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL.
ENDIF.
IF FCODE = TEXT-002.
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_STRETCH.
ENDIF.
IF FCODE = TEXT-003.
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT.
ENDIF.
IF FCODE = TEXT-004.
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL_CENTER.
ENDIF.
IF FCODE = TEXT-005.
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT_CENTER.
ENDIF.
CALL METHOD SENDER->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = DISPLAY_MODE.
endmethod.
endclass.
<u><b>Note:</b></u> <b><i>While creating this program I had observed the thing is it will accepts the logo which was having the URL so try to create a logo of URL but u can display the Standard SAP logo using this program</i></b>
<u><b>To upload the the logo image on the right hand side of the SAP screen.</b></u>
Transaction codeSMW0
X - Binary data for WebRFC application
Hit Enter
Click Execute
Click Settings -> Maintain MIME types
Click the Create button
Fill in :- TYPE : image/gif EXTENSION : .GIF
Click Save
Click Back to the Binary data for WebRFC
Click Create
Fill in :- Obj. name : ZXXXX.GIF Description : Company Logo
Click Import and specify the filename where your GIF file is located.File type is BIN. Finish press the Transfer button.
If successful, your logo will be shown in the Binary data for WebRFC.
Transaction codeSM30 - Table/View - SSM_CUST
Click Maintain
Click New Entries
Name Value to be set
START_IMAGE ZXXXX.GIF
RESIZE_IMAGE NO
Logoff and Login again
Check this link
http://www.sap-img.com/fu002.htm
Reward if helpfull
Message was edited by:
pavan praveen -
Display selection screen details in the header of ALV
hi..
can someone please help me on how to display the data in the selection screen in the header in ALV?
i hope someone can help me..thanks very much..Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100 -
AT SELECTION-SCREEN-ON FIELD event IN ALV
Hai all,
Is there any event in ALV similar to AT SELECTION-SCREEN-ON FIELD .
if so how can this be achieved ,pls give me an example .
Regards,
DevSap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain upto 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
The different steps used for getting the above function modules into use are:
Step 1
DATA DECLARATION
Sap standard type pools: SLIS , KKBLO .
Sap standard tables types taken from the type pools are: SLIS_LAYOUT_ALV ,
SLIS_T_FIELDCAT_ALV,
SLIS_T_LISTHEADER,
SLIS_T_EVENT,
SLIS_SELFIELD.
Internal tables to used in the program declared based on the above table types
DATA: I_LAYOUT TYPE SLIS_LAYOUT_ALV,
I_FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
I_HEADING TYPE SLIS_T_LISTHEADER,
I_EVENTS TYPE SLIS_T_EVENT.
TYPES: KKBLO_SELFIELD TYPE SLIS_SELFIELD.
Step 2 (Optional)
SELECTING THE VARIANTS FOR INITIAL LIST DISPLAY (DEFAULT VARIANT)
The variants in the list display can be both user-specific and general. The user can programmatically set the initial (default) variant for list display.
The default variant can be found using the function module 'REUSE_ALV_VARIANT_DEFAULT_GET'.
Sample code:
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = variant save condition ( A=all, U = user-specific )
CHANGING
cs_variant = internal table containing the program name (and the default variant---optional )
EXCEPTIONS
not_found = 2.
The user can also choose from the list of existing variants using the function module REUSE_ALV_VARIANT_F4.
Step 3
DEFININING OUTPUT CHARACTERISTICS: PREPARING DISPLAY FIELDS CATALOG
A field catalog is prepared using the internal table (I_FIELDCAT) of type SLIS_T_FIELDCAT_ALV. Field catalog containing descriptions of the list output fields (usually a subset of the internal output table fields).
A field catalog is required for every ALV list output to add desired functionality (i.e. Key, Hotspot, Specific headings, Justify, Col. position etc) to certain fields of the output. If not mentioned specifically, then the defaults are taken. The possible values and defaults are listed below.
The field catalog for the output table is built-up in the caller's coding. The build-up can be completely or partially automated by calling the REUSE_ALV_FIELDCATALOG_MERGE module.
The minimal field catalog is documented below. This can be done in a routine using a local variable. The user can use the other optional parameters to assign output attributes to different fields in the output, which differ from the default.
A field catalog need not be built-up and passed explicitly only under the following conditions:
1. The internal table to be output has the same structure as a Data Dictionary structure which is referred to in the internal table declaration using LIKE or INCLUDE STRUCTURE. In this case the attributes of the different fields is taken directly from the table and the attributes (key fields, length, texts etc) need to state explicitly.
2. all fields in this structure are to be output
3. The structure name is passed to ALV in the parameter I_STRUCTURE_NAME of the function module REUSE_ALV_LIST_DISPLAY.
All the values entered in the catalog is specific to the particular field whose name is entered in the fieldname FIELDNAME of the fieldcat structure. The name of the table is also entered in the corr. Fieldname TABNAME of the structure.
The different possible attributes are:
Row_pos (row position): Only relevant if the list output is to be multi-line (two or three lines) by default. So, this attribute can be used maintain certain level of alignment in the output.
Value set: 0, 1 3
Col_pos (column position): This parameter is relevant when the fields in the output are to be different from the sequence of the fields in the internal table used for display. The parameter specifies the relative column position of the field in the list output. The column order can be changed interactively by the user. If this parameter is initial for all field catalog entries, columns appear in the internal table field sequence.
Value set: 0, 1 60
Fieldname (field name): This is the name of the internal table field for which the parameters are passed in the catalog.
Value set: internal output table field name (required parameter)
Tabname (internal output table): Name of the internal output table that contains the field FIELDCAT-FIELDNAME above.
Value set: SPACE, internal output table name.
Ref_fieldname (reference field name): Name of the Data Dictionary field referred to. This parameter is only used when the internal output table field described by the current field catalog entry has a reference to the Data Dictionary (not a program field), and the field name in the internal output table is different from the name of the field in the Data Dictionary. If the field names are identical, naming the Data Dictionary structure or table in the FIELDCAT-REF_TABNAME parameter is sufficient.
Value set: SPACE, Data Dictionary field name.
Ref_tabname (reference table/structure field name): Structure or table name of the referred Data Dictionary field. This parameter is only used when the internal output table field described by the current field catalog entry has a Data Dictionary reference (not a program field).
Value set: SPACE, name of a Data Dictionary structure or table
Link to currency unit
Cfieldname (currency unit field name): This is used for currency fields that have a reference to any unit field. This is only relevant for amount columns with associated unit. This parameter contains the Name of the internal output table field containing the currency unit associated with the amount field FIELDCAT-FIELDNAME. The field in FIELDCAT-CFIELDNAME must have its own field catalog entry.
Value set: SPACE, output table field name
Ctabname (internal currency unit field output table): Name of the internal output table containing the FIELDCAT-CFIELDNAME field.
Value set: SPACE, output table field name.
Link to measurement unit
Qfieldname (measurement unit field name): Only relevant for quantity columns with unit link. Name of the internal output table field containing the measurement unit associated with the quantity field FIELDCAT-FIELDNAME. The field in FIELDCAT-QFIELDNAME must have its own field catalog entry.
Value set: SPACE, output table field name.
Qtabname (internal measurement unit field output table): Name of the internal output table containing the FIELDCAT-QFIELDNAME field.
Value set: SPACE, output table field name.
Outputlen (column width): This parameter is used if the desired output length for a field is desired to be different from the internal output table field. For fields with a Data Dictionary link this parameter can be left initial. For fields without a Data Dictionary link (program field) the parameter must be given the value of the desired field list output length (column width).
Initial = column width is the output length of the referred Data Dictionary field (domain).
N = column width is n characters.
Value set: 0 (initial), n.
Key (key column): By default, the system makes some fields in the output as key fields, provided the fields are key fields in their referencing table. Using this parameter, fields other than key fields of the referencing table can be made key field. This parameter is most important if the output needs to contain some field which are not scrollable or cannot be hidden.
If the internal output table contains fields that are key fields from different tables, then all those fields in the report output becomes unscrollable and cannot be hidden. So, the fields in the output internal table should not be referenced from tables in which they are key fields. Instead, they should be referenced to the tables in which they are not key fields, incase they are not desired as key field in the output.
'X' = key field (key field output in color) and Key fields can not be interactively hidden. Parameter FIELDCAT-NO_OUT must be left initial.
Value set: SPACE, 'X'.
Key_sel (hideable key column): This parameter is only relevant for the fields which are made key fields using FIELDCAT-KEY = 'X'. Using this parameter the Key field can be hidden interactively.
The key column sequence cannot be changed interactively by the user. The output is controlled by the FIELDCAT-NO_OUT parameter analogously to non-key fields.
Value set: SPACE, 'X'.
No_out (field in field list): This parameter is used to remove certain fields from the output during initial display. The user can however interactively choose the field for output from the field list in the display variant.
'X' = field is not displayed in the current list.
Value set: SPACE, 'X'.
Tech (technical field): This parameter is used to make certain field display only in the field catalog. The fields with this parameter set cannot be output in the list nor can they be displayed interactively from the catalog.
'X' = technical field.
Value set: SPACE, 'X'.
Emphasize (highlight columns in color): As name suggests, this field parameter is used to highlight certain field with chosen colors.
Value set: SPACE, 'X' or 'Cxyz' (x:'1'-'9'; y,z: '0'=off ,'1'=on).
'X' = column is colored with the default column highlight color.
'Cxyz' = column is colored with a coded color:
- C: Color (coding must begin with C)
- X: color number
- Y: bold
- Z: inverse
Hotspot (column as hotspot): This parameter is used to make certain field appear as hotspot i.e. a hand is displayed if the cursor is positioned on the field value. Single click on such fields cause the PICK OR F2 events to happen.
Value set: SPACE, 'X'.
'X' = column cells are output as hotspots.
Fix_column (fix column): This parameter is used to fix certain columns in the output. All columns to be fixed must have this flag, starting from the left. If a column without this flag is output, only the columns to the left of this column are fixed. The user can change the column fixing interactively.
Value set: SPACE, 'X'.
'X' = column fixed (does not scroll horizontally).
Do_sum (sum over column): the user can also call this function interactively.
Value set: SPACE, 'X'.
'X' = a sum is calculated over this internal output table field.
No_sum (sums forbidden): No sum can be calculated over this field, although the data type of the field would allow summing.
Value set: SPACE, 'X'.
Icon: The parameter displays certain column contents as icons. The internal output table column contents must be valid icon strings.
Value set: SPACE, 'X'.
'X' = column contents to be output as an icon.
Symbol: The internal output table column must be a valid symbol character.
Value set: SPACE, 'X'
'X' = column contents are to be output as a symbol.
Just (justification): This parameter is used for alignment of the contents of the output table. This is only relevant for CHAR or NUMC fields in the output internal table. The justification of the column header always follows the justification of the columns. Independent justification of the column header is not possible.
Value set: SPACE, 'R', 'L', and C.
' ' = Default justification for this data type
'R' = right-justified output
'L' = left-justified output
'C' = centered output.
Lzero (leading zeros): By default ALV outputs NUMC fields right-justified without leading zeros. Using this parameter only the NUMC fields can be displayed with leading zeroes.
Value set: SPACE, 'X'.
'X' = output with leading zeros.
No_sign (no +/- sign): This parameter is used to suppress the signs of the output fields. It is only relevant for the value fields.
Value set: SPACE, 'X'.
'X' = value output without +/ sign.
No_zero (suppress zeros): Only relevant for value fields.
Value set: SPACE, 'X'.
'X' = suppress zeros.
Edit_mask (field formatting): To apply the report output formatting options same as in the WRITE statement in report writing.
Value set: SPACE, template.
The following parameters are used for customizing the texts in the heading of the output of the columns. The texts are taken from the Data Dictionary for fields with a Data Dictionary reference. If this is not desired, the text parameters can also be specified. The Data Dictionary texts are then ignored.
If the user changes the column width interactively, the column header text with the appropriate length is always used.
The interactive function 'Optimize column width' takes account of both the field contents and the column headers: if all field contents are shorter than the shortest column header, the column width depends on the column header.
The 'long field label' is also used in display variant definition,
Sort, etc. Popup.
seltext_l (long field label)
seltext_m (medium field label)
seltext_s (short field label)
reptext_ddic(header) Analogous to the Data element main header
Ddictxt (specify text) : You can specify with values 'L', 'M', and 'S', the keyword that should always be used as column header. If the column width changes, no attempt is made in this case to find an appropriate header for the new output width.
Value set: SPACE, 'L', 'M', and S.
Sample code:
Suppose I_PO_DETAILS is an internal table containing two fields EBELN (PO number) and EBELP (PO item no).
DATA: L_FIELDCAT TYPE SLIS_FIELDCAT_ALV. Local variable to hold the parameters
for a particular field of the field catalog
CLEAR L_FIELDCAT.
L_FIELDCAT-TABNAME = 'I_PO_DETAILS'.
L_FIELDCAT-FIELDNAME = 'EBELN'.
L_FIELDCAT-KEY = 'X'. The PO no is made the key field,
Colored and non scrollable
L_FIELDCAT-HOTSPOT = 'X'. The po no becomes a hotspot
L_FIELDCAT-SELTEXT_S = P.O No.
L_FIELDCAT-SELTEXT_M = 'P order No'.
L_FIELDCAT-SELTEXT_L = 'Purchase order No'.
APPEND L_FIELDCAT TO I_FIELDTAB.
CLEAR L_FIELDCAT
L_FIELDCAT-TABNAME = 'I_PO_DETAILS'.
L_FIELDCAT-FIELDNAME = 'EBELN'.
L_FIELDCAT-KEY = 'X'. The po item no is made the key field,
Colored and non scrollable
L_FIELDCAT-SELTEXT_S = 'Item No'.
L_FIELDCAT-SELTEXT_M = 'Item No`.
L_FIELDCAT-SELTEXT_L = 'PO Item No'.
APPEND L_FIELDCAT TO I_FIELDTAB.
CLEAR L_FIELDCAT
Thus the catalog for the report output is prepared.
Step 4
The next step is to build an event table, which are used for firing both user commands and the system dependent events i.e. top of page, end of page etc.
A list of possible events is populated into an event table (I_EVENTS) when this table is passed to the function module REUSE_ALV_EVENT_NAMES_GET. The return table from this function module contains all the possible events.
The function module contains following import and export parameters.
IMPORTING PARAMETERS: I_LIST_TYPE
This parameter has possible values from 0-4.
The parameter I_LIST_TYPE is of TYPE SLIS_LIST_TYPE and is DEFAULT 0 .
EXPORTING PARAMETERS: I_EVENTS table.
This table is of TYPE SLIS_T_EVENT and returns to the program the name of all the possible events.
The table structure contains the fields:
I_EVENTS-NAME: Name of the Callback event.
I_EVENTS-FORM: Name of the form routine that should be called in the calling program at the event.
Only events with a form routine name are processed.
The I_EVENTS table returns with the following possible constants:
1. Slis_ev_item_data_expand TYPE slis_formname VALUE 'ITEM_DATA_EXPAND'.
Only relevant for hierarchical-sequential lists using the layout parameter IS_LAYOUT-EXPAND_FIELDNAME of the structure IS_LAYOUT. Exit for passing item entries (ITEM table) for a header record that was expanded interactively by the user.
2. Slis_ev_reprep_sel_modify TYPE slis_formname VALUE 'REPREP_SEL_MODIFY'.
RS_SELFIELD-TABINDEX contains the header table index for which the item entries are to be put in the global item output table (T_OUTTAB_SLAVE). The Callback is only called if ALV has no items for a header that is to be expanded.
RFLG_ALL is passed with 'X' if the user shows all items. The application must ensure that entries are not repeated in the item table.
RS_SELFIELD is initial in this case.
3. Slis_ev_caller_exit_at_start TYPE slis_formname VALUE 'CALLER_EXIT'.
Is called at the beginning of the function module to make special settings. It is not usually used.
4. Slis_ev_user_command TYPE slis_formname VALUE 'USER_COMMAND'.
As this is a frequently-used Callback event, the form routine can also be passed directly in the interface by passing the user command in the IMPORTING parameter I_CALLBACK_USER_COMMAND.
5. Slis_ev_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE'.
Equivalent to the list processing TOP-OF-PAGE event.
6. Slis_ev_top_of_coverpage TYPE slis_formname VALUE 'TOP_OF_COVERPAGE'.
The selection information and list status are output together (if they exist) on a separate page by default
7. Slis_ev_end_of_coverpage TYPE slis_formname VALUE 'END_OF_COVERPAGE'.
Analogously to TOP_OF_COVERPAGE the user can add other information
to the information output by ALV (selection information, list status) at this event.
8. Slis_ev_foreign_top_of_page TYPE slis_formname VALUE FOREIGN_TOP_OF_PAGE'.
The Top-of-page event is always processed in ALV and is only passed to the caller via the Callback mechanism. This is still the case if the caller, e.g. by a user action, processes a branch list which was not formatted by ALV (e.g. a popup with additional information about the list record selected and displayed by ALV).
In this case, top-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event top-of-page still occurs in ALV. When ALV notices a top-of-page which was not caused by an ALV output, the form routine in FOREIGN_TOP_OF_PAGE is called.
9. Slis_ev_foreign_end_of_page TYPE slis_formname VALUE 'FOREIGN_END_OF_PAGE'.
The event end-of-page is always processed in ALV and only passed to the caller via callback. This is still the case, e.g. when the caller processes a details list which was not formatted by ALV (e.g. a popup with further information about selected list records which were displayed by ALV).
In this case, end-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event end-of-page still occurs in ALV. When ALV notices an end-of-page that was not caused by an ALV output, the form routine in FOREIGN_END_OF_PAGE is called.
10. Slis_ev_pf_status_set TYPE slis_formname VALUE 'PF_STATUS_SET'.
If a user list status is to be set, it must be done in the form routine assigned to this event. The ALV function codes, which must not be active, are in the Parameter RT_EXTAB. This table must be passed with the SET PF-STATUS command (with inactive user function codes as well, if necessary).
The STANDARD status of the function group SALV should be used as a template for a user-specific status. As this is a frequently used Callback event, its form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_PF_STATUS_SET.
11. Slis_ev_list_modify TYPE slis_formname VALUE 'LIST_MODIFY'.
LIST_MODIFY USING R_TABNAME TYPE SLIS_TABNAME
R_INDEX LIKE SY-TABIX
R_INDEX_ITEM LIKE SY-TABIX
R_INDEX_SUM LIKE SY-TABIX.
12. Slis_ev_top_of_list TYPE slis_formname VALUE 'TOP_OF_LIST'.
Information output at the start of the list
13. Slis_ev_end_of_page TYPE slis_formname VALUE 'END_OF_PAGE'.
Information output at the end of a page. This is only called for printing.
14. Slis_ev_end_of_list TYPE slis_formname VALUE 'END_OF_LIST'.
Information output at the end of the list
15. Slis_ev_after_line_output TYPE slis_formname VALUE 'AFTER_LINE_OUTPUT'.
Output information after each output line. Should only be used in justified cases because it costs a lot of performance.
16. Slis_ev_before_line_output TYPE slis_formname VALUE 'BEFORE_LINE_OUTPUT'.
Output information before each output line. Should only be used in justified cases because it costs a lot of performance.
17. Slis_ev_subtotal_text TYPE slis_formname VALUE 'SUBTOTAL_TEXT'.
This event table (I_EVENTS) is now checked with the desired constants. If the desired constant is found, then the corresponding field for the FORM NAME is populated with the name of the routine containing the corresponding event.
Sample code :
FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE', FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
DATA: L_I_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = I_EVENTS.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO L_I_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_TOP_OF_PAGE TO L_I_EVENT-FORM.
APPEND L_I_EVENT TO I_EVENTS.
ENDIF.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO L_I_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_END_OF_PAGE TO L_I_EVENT-FORM.
APPEND L_I_EVENT TO I_EVENTS.
ENDIF.
CLEAR L_I_EVENT.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND
INTO L_I_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_USER_COMMAND TO L_I_EVENT-FORM.
APPEND L_I_EVENT TO I_EVENTS.
ENDIF.
This will prepare the events table for the report.
The report will contain three forms for the above events:
1. FORM TOP_OF_PAGE : This form will contain the top of page event for the report i.e header etc
Using the function module REUSE_ALV_COMMENTARY_WRITE, the internal table containing the headings for top of page event can be passed to the list output. Also, any logo specific to the report can be passed to the function module.
2. FORM END_OF_PAGE : This form will contain the end of page event for the report i.e footer etc
3. FORM USER_COMMAND : This form will contain the desired user command i.e pick/line selection
Step 5
A layout is build for the report output list description USING the internal table declared above (I_LAYOUT).
Output list description structure.
The parameters are described under the following heads:
Display options
Exceptions
Totals
Interaction
Detail screen
Display variants (only for hierarchical-sequential lists)
Color
Other
The layout table is of type slis_layout_alv_spec and has the following fields:
Display options
1. Colwidth_optimize (1) TYPE c: This parameter optimizes the length of the different columns in the output. The width of the different col. now depends on the max. Length of the data in the column.
Value set: SPACE, 'X'
'X' = optimizes the column width so that all contents are displayed completely.
2. No_colhead(1) TYPE c : This parameter suppresses the column headings
Value set: SPACE, 'X'.
'X' = column headers are not output
3. No_hotspot(1) TYPE c : The heading of the report output are not output as hotspot.
Value set: SPACE, 'X'.
'X' = column headers are not output as hotspot
4. Zebra(1) TYPE c : The report is output in the striped pattern.
Value set: SPACE, 'X'.
'X' = striped pattern (e.g. for wide lists)
5. No_vline(1) TYPE c : The report output contains columns only separated by space and no lines. It is not relevant for: hierarchical-sequential lists and multiple-line lists.
Value set: SPACE, 'X'.
'X' = columns separated by SPACE
6. No_min_linesize(1) TYPE c : The report line size is equal to the width of the list. It is not relevant for block lists.
Value set: SPACE, 'X.
'X' = line size depends on list width
' ' = Line size is set to 80 or MIN_LINESIZE (if > 0) .
7. Min_linesize LIKE sy-linsz: The report output contains a minimum possible length of line. If initial min_linesize is set to 80 by default, then this parameter is used to customize it. The prerequisite for this is that the parameter no_min_linesize should be ' '.
Value set: 0, 10 - 250
If the list is wider, the format uses the list width (maximum 250 or MAX_LINESIZE (if > 0)).
8. Max_linesize LIKE sy-linsz: The default max. Linesize is 250. To change this default value, this parameter can interactively-define the maximum list width setting.
Value set: 0, 80 - 1020
9. Window_titlebar LIKE rsmpe-tittext: To set the titlebar on the report output.
10. No_uline_hs(1) TYPE c.
Exceptions
11. Lights_fieldname TYPE slis_fieldname: Internal output table field containing the codes of exceptions to be output.
Output table field code: '1' = red traffic light
'2' = yellow traffic light
'3' = green traffic light Fieldname for exception
Value set: SPACE, internal output table field name.
12. Lights_tabname TYPE slis_tabname: Name of the internal output table that contains the field in the parameter LIGHTS_FIELDNAME. If LIGHTS_FIELDNAME is not empty, this field must also be filled for hierarchical-sequential lists. Only relevant for hierarchical-sequential lists.
. Value set: SPACE, internal output table name.
13. Lights_rollname LIKE dfies-rollname: The documentation of this data element is displayed when you call F1 help for an exception column.
Value set: SPACE, data element name.
14. Lights_condense(1) TYPE c : If a list record is output with 'red traffic light', each
Subtotal that includes this record is also output with 'red traffic light'.
Value set: SPACE, 'X'
'X' = the 'maximum' exception of the items in the subtotal is output at subtotal level.
Sums
15. No_sumchoice(1) TYPE c : This parameter allows the choice for summing up
Only by fieldcatalog.
Value set: SPACE, 'X'
'X' = fields which are to be summed, passed by the calling program (FIELDCAT-DO_SUM = 'X'). The user should not be able to change this value interactively.
16. No_totalline(1) TYPE c : Removes the option of having totals after sub-totals.
Value set: SPACE, 'X'
'X' = no total record is to be output. Subtotals can still be calculated and output. The fields in the subtotals are flagged DO_SUM = 'X' in the field list.
17. No_subchoice(1) TYPE c : Does not allow the user to interactively change the field chosen for subtotals.
Value set: SPACE, 'X'
'X' = value whose change triggers subtotals, provided by the calling program. The user should not be able to change this value interactively.
18. No_subtotals(1) TYPE c : No subtotals possible
Value set: SPACE, 'X'
'X' = no subtotals.
19. Numc_sum(1) TYPE c : Totals only possible for NUMC-Fields.
20. No_unit_splitting TYPE c: No separate total lines by inh.units
21.totals_before_items TYPE c: Display totals before the items
22. Totals_only(1) TYPE c : Show only totals
Value set: SPACE, 'X'
'X' = only total records are output.
23. Totals_text(60) TYPE c : Text for 1st col. in totals
Value set: SPACE, string (max.60)
' ' = The first column in the total record contains an appropriate number of '*'s to indicate the total by default. If the first column is wide enough, the string 'Total' is output after the asterisks.
'String = The string passed is output after the total indicated by '*', if the column is wide enough.
24. Subtotals_text(60) TYPE c : Texts for subtotals
Value set: SPACE, string (max.60)
' ' = In the first column of subtotal records, the subtotal is indicated by an appropriate number of '*' by default. If the first column is not a subtotal criterion, the string 'Total' is output after the asterisks, if the column is wide enough.
'String = the string passed is output after the subtotal indicated by '*', if the column is wide enough and the first column is not a subtotal criterion. If it is a subtotal criterion, its value is repeated after the total, if the column is wide enough.
Interaction
25. Box_fieldname TYPE slis_fieldname: Fieldname for checkbox in the report output. If the list has checkboxes at the start of records (for selecting several records), this parameter contains the internal output table field name indicated by the checkbox selection column. The field is a checkbox at the start of list records without a list header.
Value set: SPACE, internal output table field name
26. Box_tabname TYPE slis_tabname: Name of the internal output table that contains the field in the parameter BOX_FIELDNAME. If BOX_FIELDNAME is not empty, this field must also be filled for hierarchical-sequential lists.
Value set: SPACE, internal output table name.
27. Box_rollname LIKE dd03p-rollname: rollname for checkbox
28. Expand_fieldname TYPE slis_fieldname: fieldname flag expand. The user can show or hide the items by clicking on the folder symbol (hotspot). If the items for a header entry are only to be read by the calling program and passed to ALV when a header has been expanded interactively, this can be controlled via the CALLBACK event 'ITEM_DATA_EXPAND'.
29. Hotspot_fieldname TYPE slis_fieldname: Used to make the fieldname flag hotspot.
30. No_input(1) TYPE c : The fields are only display fields.
Value set: SPACE, 'X'
'X' = all ready-for-input fields in a list are displayed as not ready-for-input. (Record selection checkboxes and fields which can be made ready-for-input via the field list parameter FIELDCAT-INPUT = 'X')
31. F2code LIKE sy-ucomm: To assign an ALV standard function code to double-click (F2), assign the function code to this parameter. Ex.: to assign the ALV standard function 'Detail' ('&ETA') to F2.
=> LAYOUT-F2CODE = '&ETA'.
Value set: SPACE, function code
32. Confirmation_prompt: confirm. Prompt when leaving
Value set: SPACE, 'X'
'X' = if one of the functions Back (F03)', Exit (F15)' or Cancel (F12)' occurs, a confirmation prompt appears.
33. Key_hotspot(1) TYPE c : The key fields are displayed as hotspot. The columns defined in the field catalog as key fields (FIELDCAT-KEY = 'X') are output as hotspots, i.e. clicking on a key column (highlighted in color in the list) calls the function under F2.
Value set: SPACE, 'X'.
34. Reprep(1) TYPE c : report report interface active.
35. Group_buttons(1) TYPE c : group-buttons for COL1 - COL5 . Group output fields via FIELDCAT-SP_GROUP in the field list, and pass the group name to the list module in the interface parameter IT_SPECIAL_GROUPS.
Value set: SPACE, 'X'.
36. No_keyfix(1) TYPE c : Used to make the key fields scrollable.
Value set: SPACE, 'X'.
' ' = The key columns defined in the field catalog by FIELDCAT-KEY = 'X' are fixed in the list output. These columns do not scroll horizontally. The item table key columns are fixed in hierarchical-sequential lists. The header table key fields are not considered here.
'X' = key columns not fixed
37. Get_selinfos(1) TYPE c : To read selection screen.
Value set: SPACE, 'X'.
If the calling program is a report with an ABAP/4 selection screen, setting this parameter makes ALV read the selection screen again. If the selections are read successfully, a pushbutton, via which the user can call a popup which lists the report selections in a simple form, becomes active on the results list output by ALV.
38. group_change_edit(1) TYPE c : Settings by user for new group
Value set: SPACE, 'X'
'X' = the user can enter a format option for each sort criterion in the sort/subtotal popup, for the list format when this value changes (e.g. new page or underline).
39. No_scrolling(1) TYPE c : Does not allow scrolling of the list to the right.
Value set: SPACE, 'X'.
40. Expand_all(1) TYPE c : Expand all positions
Detailed screen
40. Detail_popup(1) TYPE c : show detail in popup.
Value set: SPACE, 'X'
' ' = List record detail display in full-screen mode, with top-of-page.
'X' = list record detail display in popup (without top-of-page).
41. Detail_initial_lines(1) TYPE c : show also initial lines
Value set: SPACE, 'X'
' ' = Only fields whose contents are not initial are output in the detail view.
'X' = initial field contents are also output in detail.
41. detail_titlebar(30) type c : Titlebar for detail screen
Value set: SPACE, string (max.30)
` ' = ' Detail: Display' is output as the title of the detail window.
'String = the string passed is output as the title of the detail window.
Display variants
42. Header_text (20) TYPE c: Text for header button. Only relevant for hierarchical-sequential lists. You can toggle between display field and field list views via pushbuttons in the display variant definition popup for hierarchical-sequential lists. The views refer to the hierarchy level of the fields. This is technically a toggle between the header table and item table fields.
Value set: SPACE, CHAR (20)
' ' = The header table field pushbutton text is 'Header' by default.
CHAR (20) = header table field pushbutton text.
43.item_text(20) TYPE c : Text for item button. Only relevant for hierarchical-sequential lists. You can toggle the view between the display fields and the field list via pushbuttons in the display variant definition popup for hierarchical-sequential lists. The views refer to the hierarchy level of the fields. This is technically a toggle between the header table and item table fields.
Value set: SPACE, CHAR (20)
' ' = The pushbutton text for the item table fields is 'Item' by default.
CHAR (20) = item table field pushbutton text.
44.default_ item(1) TYPE c : Items as default. Only relevant for hierarchical-sequential lists.
Value set: SPACE, 'X'
' ' = The header table fields are displayed by default in the display variant definition popup. The user can switch to the item table fields interactively.
'X' = the item table fields are displayed by default in the display variant Definition Popup. The user can switch to the header table fields interactively.
Colour
45. Info_fieldname TYPE slis_fieldname: infofield for listoutput. A whole list record can be colored individually using a color code in a column of the internal output table for the record. Assign the name of the field containing the color code to this parameter.
Value set: SPACE, internal output table field name
The internal output table field must be of type CHAR(3).
The code must have the following syntax: 'Cxy':
C = color (all codes must start with 'C')
X = color number ('1'-'9')
Y = bold ('0' = off, '1' = on)
46. Coltab_fieldname TYPE slis_fieldname: Cells can be colored individually using a color code which is contained in a column of the internal output table for the record containing the cell. Assign the name of the field to this parameter.
Others
47. List_append(1) TYPE c : no call screen. It is only useful to output block-lists without specifying the above modules if the number of list blocks exceeds, or may exceed, the maximum number specified in the block module documentation. These operations are not possible for user-defined block lists.
Example code :
I_LAYOUT-f2code = ws_fcode.
I_LAYOUT-zebra = 'X'.
I_LAYOUT-colwidth_optimize = 'X'.
I_LAYOUT-no_keyfix = 'X'.
I_LAYOUT-get_selinfos = 'X'.
I_LAYOUT-no_hotspot = 'X'.
I_LAYOUT-no_input = 'X'.
I_LAYOUT-hotspot_fieldname = FIELDNAME.
I_LAYOUT-no_input = X.
I_LAYOUT-no_vline = `X.
I_LAYOUT-no_colhead = .
I_LAYOUT-lights_condense = ` `.
I_LAYOUT-totals_text = ` `.
I_LAYOUT-subtotals_text = ` `.
I_LAYOUT-totals_only = ` `.
I_LAYOUT-key_hotspot = X.
I_LAYOUT-detail_popup = X.
I_LAYOUT-group_change_edit = X.
I_LAYOUT-GROUP_BUTTONS = X.
Step 6
This step is required to get the selection screen information in the report output.
The prerequisite for this is to set the parameter LAYOUT-GET_SELINFOS of the IMPORTING structure.
The parameters to be passed in the IS_SEL_HIDE table are:
o mode: 'R' = only the entries passed in the internal table IS_SEL_HIDE-T_ENTRIES
Are output in the pop up. Selection info, which the list tool read in the selection screen (when called by a report with a selection screen), is replaced by the values passed.
'S' = the selection info which the list tool read in the selection screen of the calling report are modified by the entries in the table IS_SEL_HIDE-T_ENTRIES.
o t_entries: Selection info table
o t_entries-mode: 'A' = output the selection info for the current table record in the info popup.
'D' = do not output select option or SELNAME parameter selection info in the popup.
o t_entries-selname: (only used in t_entries-mode = 'D') : Name of the select option or parameter.
The following table fields are only used in t_entries-mode = 'A'. They contain the selection information to be added.
t_entries-field: DDIC field name of the field for which selection information is to be output.
t_entries-table: DDIC table names of t_entries-field.
t_entries-stext: Field name in info popup.
If t_entries-field and t_entries-table have been entered, this text is taken from DDIC.
t_entries-valuf: Selection condition 'from' value (external format)
t_entries-valut: Selection condition 'to' value (external format)
t_entries-sign0: (I)nclusive (E)xclusive
t_entries-option: All values of the select options Option field allowed.
Step 6
The Table IT_SORT is populated with the sort criteria for the different fields.
The caller specifies the sorting and/or subtotaling of the basic list in the internal table IT_SORT.
This internal table has the following fields:
o spos : Sort sequence
o fieldname : Internal output table field name
o tabname : Only relevant for hierarchical-sequential lists. Name of the internal output table.
o up : 'X' = sort in ascending order
o down : 'X' = sort in descending order
o subtot : 'X' = subtotal at group value change
o group : '* ' = new page at group value change ,'UL' = underline at group value change
Step 7
The final step in the output of the report is the use of two ALV functions modules.
1. REUSE_ALV_FIELDCATALOG_MERGE
2. REUSE_ALV_LIST_DISPLAY
The first function module is used to pass the field catalog to the report output and merge it with the internal output table.
FUNCTION reuse_alv_fieldcatalog_merge.
""Lokale Schnittstelle:
* IMPORTING
*" VALUE(I_PROGRAM_NAME) LIKE SY-REPID OPTIONAL
*" VALUE(I_INTERNAL_TABNAME) TYPE SLIS_TABNAME OPTIONAL
*" VALUE(I_STRUCTURE_NAME) LIKE DD02L-TABNAME OPTIONAL
*" VALUE(I_CLIENT_NEVER_DISPLAY) TYPE SLIS_CHAR_1
*" DEFAULT 'X'
*" VALUE(I_INCLNAME) LIKE TRDIR-NAME OPTIONAL
*" CHANGING
*" VALUE(CT_FIELDCAT) TYPE SLIS_T_FIELDCAT_ALV
*" EXCEPTIONS
*" INCONSISTENT_INTERFACE
*" PROGRAM_ERROR
Import parameters
I_PROGRAM_NAME: Program in which the internal output table is declared and populated
I_INTERNAL_TABNAME: Internal output table name
I_STRUCTURE_NAME: Structure name (structure, table, and view)
I_CLIENT_NEVER_DISPL: Hide client fields default X
I_INCLNAME: Data declarations include name
CHANGING parameter
CT_FIELDCAT: Field catalog with field descriptions
The variant based on a program-internal table should only be used for rapid prototyping since the following restrictions apply:
1. Performance is affected since the code of the table definition must always be read and interpreted at runtime.
2. Dictionary reference are only considered if the keywords LIKE or INCLUDE STRUCTURE (not TYPE) are used.
Step 8
The other function module is used to display the internal output table with the contents
FUNCTION reuse_alv_list_display.
""Lokale Schnittstelle:
* IMPORTING
*" VALUE(I_INTERFACE_CHECK) DEFAULT SPACE
*" VALUE(I_CALLBACK_PROGRAM) LIKE SY-REPID DEFAULT SPACE
*" VALUE(I_CALLBACK_PF_STATUS_SET) TYPE SLIS_FORMNAME
*" DEFAULT SPACE
*" VALUE(I_CALLBACK_USER_COMMAND) TYPE SLIS_FORMNAME
*" DEFAULT SPACE
*" VALUE(I_STRUCTURE_NAME) LIKE DD02L-TABNAME OPTIONAL
*" VALUE(IS_LAYOUT) TYPE SLIS_LAYOUT_ALV OPTIONAL
*" VALUE(IT_FIELDCAT) TYPE SLIS_T_FIELDCAT_ALV OPTIONAL
*" VALUE(IT_EXCLUDING) TYPE SLIS_T_EXTAB OPTIONAL
*" VALUE(IT_SPECIAL_GROUPS) TYPE SLIS_T_SP_GROUP_ALV
*" OPTIONAL
*" VALUE(IT_SORT) TYPE SLIS_T_SORTINFO_ALV OPTIONAL
*" VALUE(IT_FILTER) TYPE SLIS_T_FILTER_ALV OPTIONAL
*" VALUE(IS_SEL_HIDE) TYPE SLIS_SEL_HIDE_ALV OPTIONAL
*" VALUE(I_DEFAULT) DEFAULT 'X'
" VALUE(I_SAVE) DEFAULT SPACE
" VALUE(IS_VARIANT) LIKE DISVARIANT
" STRUCTURE DISVARIANT DEFAULT SPACE
" VALUE(IT_EVENTS) TYPE SLIS_T_EVENT OPTIONAL
" VALUE(IT_EVENT_EXIT) TYPE SLIS_T_EVENT_EXIT OPTIONAL
" VALUE(IS_PRINT) TYPE SLIS_PRINT_ALV OPTIONAL
" VALUE(IS_REPREP_ID) TYPE SLIS_REPREP_ID OPTIONAL
" VALUE(I_SCREEN_START_COLUMN) DEFAULT 0
" VALUE(I_SCREEN_START_LINE) DEFAULT 0
" VALUE(I_SCREEN_END_COLUMN) DEFAULT 0
" VALUE(I_SCREEN_END_LINE) DEFAULT 0
" EXPORTING
" VALUE(E_EXIT_CAUSED_BY_CALLER)
" VALUE(ES_EXIT_CAUSED_BY_USER) TYPE SLIS_EXIT_BY_USER
" TABLES
" T_OUTTAB
" EXCEPTIONS
" PROGRAM_ERROR
Import parameters
I_INTERFACE_CHECK: Interface consistency check log output.
I_CALLBACK_PROGRAM: Name of the calling program
I_CALLBACK_PF_STATUS_SET: Set EXIT routine to status.
I_CALLBACK_USER_COMMAND: EXIT routine for command handling
I_STRUCTURE_NAME: Internal output table structure name
IS_LAYOUT: List layout specifications
IT_FIELDCAT: Field catalog with field descriptions
IT_EXCLUDING: Table of inactive function codes
IT_SPECIAL_GROUPS: Grouping fields for column selection
IT_SORT: Sort criteria for first list display
IT_FILTER: Filter criteria for first list output
IS_SEL_HIDE : Selection information modification
I_DEFAULT: Initial variant active/inactive logic
I_SAVE: Variants can be saved
IS_VARIANT : Variant information
IT_EVENTS: Table of events to perform IT_EVENT_EXIT : Standard fcode exit requests table
IS_PRINT: Print information
IS_REPREP_ID: Initialization keys for Re/Re interface
I_SCREEN_START_COLUMN: Coordinates for list in dialog box
I_SCREEN_START_LINE: Coordinates for list in dialog box
I_SCREEN_END_COLUMN: Coordinates for list in dialog box
I_SCREEN_END_LINE: Coordinates for list in dialog box
IT_EVENT_EXIT: Standard fcode exit requests table
IS_PRINT: Print information
IS_REPREP_ID: Initialization keys for Re/Re interface
I_SCREEN_START_COLUMN: Coordinates for list in dialog box
I_SCREEN_START_LINE: Coordinates for list in dialog box
I_SCREEN_END_COLUMN: Coordinates for list in dialog box
I_SCREEN_END_LINE: Coordinates for list in dialog box
Export parameters
E_EXIT_CAUSED_BY_CALLER: Delete list in CALLBACK_USER_COMMAND
ES_EXIT_CAUSED_BY_USER: How the user left the list Tables
T_OUTTAB: Table with data to be displayed ---mandatory
Example Code
WS_REPNAME = SY-REPID.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = WS_REPNAME
I_INTERNAL_TABNAME = Internal output table field name
I_INCLNAME = WS_REPNAME
CHANGING
CT_FIELDCAT = I_FIELDTAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC, 'REUSE_ALV_FIELDCATALOG_MERGE'.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = WS_REPNAME
I_STRUCTURE_NAME = Internal output table field name
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = I_FIELDTAB
I_DEFAULT = 'A'
I_SAVE = 'A'
IS_VARIANT = 'X'
IT_EVENTS = I_EVENTS[]
IT_SORT = I_SORT
IS_SEL_HIDE = I_SELINFO
TABLES
T_OUTTAB = Internal output table field name.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC, 'REUSE_ALV_LIST_DISPLAY'.
ENDIF
THIS IS THE POP UP TO ALLOW THE USER TO DYNAMICALLY SELECT THE FIELDS FOR DISPLAY. HE CAN CHOOSE FROM THIS FIELDS ACC. TO REQUIREMENT AND HIDE THE OTHER FIELDS
Example report output based prior to selection of the field
THE USER HAS HIDDEN SOME OF THE FIELD FROM THE TOTAL FIELDS TO CUSTOMIZE THE REPORT OUTPUT
Example report output after hiding some of the fields
USER CAN CHOOSE A PARTICULAR SET OF FIELD FROM THE OUTPUT AND CAN SAVE IT AS VARIANTS
Using other function module 'REUSE_ALV_GRID_DISPLAY can help us get list output in the form of a grid and also attach logos to the report output.
Sample code
1 Simple list output:
REPORT Y_DEMO_ALV NO STANDARD PAGE HEADING.
Data to be displayed
DATA: I_SFLIGHT TYPE TABLE OF SFLIGHT.
Selection
SELECT * FROM SFLIGHT INTO TABLE I_SFLIGHT.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT'
TABLES
T_OUTTAB = I_SFLIGHT.
2.Simple grid output:
REPORT Y_DEMO_ALV_1.
Data to be displayed
DATA: I_SFLIGHT TYPE TABLE OF SFLIGHT.
Selection
SELECT * FROM SFLIGHT INTO TABLE I_SFLIGHT.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT'
TABLES
T_OUTTAB = I_SFLIGHT.
3. Demo for 'REUSE_ALV_POPUP_TO_SELECT'
REPORT y_demo_alv_3.
TYPE-POOLS: slis.
DATA: BEGIN OF i_outtab OCCURS 0.
INCLUDE STRUCTURE sflight.
DATA: w_chk TYPE c. "For multiple selection
DATA: END OF i_outtab.
I_OUTTAB TYPE SFLIGHT OCCURS 0,
DATA: i_private TYPE slis_data_caller_exit,
i_selfield TYPE slis_selfield,
W_exit(1) TYPE c.
PARAMETERS: p_title TYPE sy-title.
START-OF-SELECTION.
SELECT * FROM sflight INTO TABLE i_outtab.
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
EXPORTING
i_title = p_title
i_selection = 'X'
i_zebra = 'X'
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
i_checkbox_fieldname = 'W_CHK'
I_LINEMARK_FIELDNAME =
I_SCROLL_TO_SEL_LINE = 'X'
i_tabname = 'I_OUTTAB'
i_structure_name = 'SFLIGHT'
IT_FIELDCAT =
IT_EXCLUDING =
I_CALLBACK_PROGRAM =
I_CALLBACK_USER_COMMAND =
IS_PRIVATE = I_PRIVATE
IMPORTING
es_selfield = i_selfield
e_exit = w_exit
TABLES
t_outtab = i_outtab
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE i000(0k) WITH sy-subrc.
ENDIF.
*****the internal table is modified with a cross sign for marking the
***rows selected
LOOP AT i_outtab WHERE w_chk = 'X'.
WRITE: / i_outtab-carrid, i_outtab-price.
ENDLOOP.
4. Demo for ALV output using field catalog and layout:
REPORT y_demo_alv NO STANDARD PAGE HEADING.
ALV related data declaration
TYPE-POOLS: slis.
DB-Table
TABLES sflight.
Includes
INCLUDE < -
Insert picture in selection screen.
Hi,
Can some one suggest how to insert picture in selection screen?
Thanks
DeepHi,
I have inserted a picture in my classical report. According to the position where you want can be adjusted. If you know how to upload Logo in SMW0 then upload and just copy paste the code that i have shown will display the image.
DATA: docking TYPE REF TO cl_gui_docking_container,
picture_control_1 TYPE REF TO cl_gui_picture,
url(256) TYPE c .
DATA: query_table LIKE w3query OCCURS 1 WITH HEADER LINE,
html_table LIKE w3html OCCURS 1,
return_code LIKE w3param-ret_code,
content_type LIKE w3param-cont_type,
content_length LIKE w3param-cont_len,
pic_data LIKE w3mime OCCURS 0,
pic_size TYPE i.
* END OF DO NOT CHANGE----------------------*
FORMAT HOTSPOT ON.
DATA : sum(4) , num1(4) , num2(4).
PARAMETERS: A(4) DEFAULT '4' .
PARAMETERS: B(4) DEFAULT '5' .
DATA: ANSWER TYPE I.
ANSWER = A + B.
WRITE:/ ANSWER.
AT SELECTION-SCREEN OUTPUT.
PERFORM show_pic.
* PERFORM show_pic1.
START-OF-SELECTION.
*& Form show_pic
FORM show_pic.
DATA: repid LIKE sy-repid.
repid = sy-repid.
CREATE OBJECT picture_control_1 EXPORTING parent = docking.
CHECK sy-subrc = 0.
CALL METHOD picture_control_1->set_3d_border
EXPORTING
border = 5.
CALL METHOD picture_control_1->set_display_mode
EXPORTING
display_mode = cl_gui_picture=>display_mode_stretch.
CALL METHOD picture_control_1->set_position
EXPORTING
height = 90
left = 40
top = 30
width = 190.
*CHANGE POSITION AND SIZE ABOVE*****************
IF url IS INITIAL.
REFRESH query_table.
query_table-name = '_OBJECT_ID'.
*CHANGE IMAGE NAME BELOW UPLOADED IN SWO0******************
query_table-value = 'YREDDY'. "name which u have given in SMW0
APPEND query_table.
query_table-value = 'YLOGO'.
APPEND query_table.
*FORMAT HOTSPOT ON.
CALL FUNCTION 'WWW_GET_MIME_OBJECT'
TABLES
query_string = query_table
html = html_table
mime = pic_data
CHANGING
return_code = return_code
content_type = content_type
content_length = content_length
EXCEPTIONS
object_not_found = 1
parameter_not_found = 2
OTHERS = 3.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
type = 'image'
subtype = cndp_sap_tab_unknown
size = pic_size
lifetime = cndp_lifetime_transaction
TABLES
data = pic_data
CHANGING
url = url
EXCEPTIONS
OTHERS = 1.
ENDIF.
CALL METHOD picture_control_1->load_picture_from_url
EXPORTING
url = url.
FORMAT HOTSPOT OFF.
ENDFORM. -
I have downloaded ios 6 on my ipad 2 but it wouldn't install and now my ipad won't work (just has the apple logo on the screen periodically) and it won't reset. Any ideas folks? Thanks in advance.
Try restoring the device using iTunes. Connect the iPad to your computer and when iTunes opens, select your device on the left side, then click on the summary tab, then click on Restore.
After the device is restored you will have an opportunity to restore from your backup. Restore from the backup when you are done and then sync with iTunes.
if that doesn't work, try recovery mode.
http://support.apple.com/kb/ht4097 -
Regarding Selection Screen field making display field in ALV report
Hi All,
In ALV Report, at runtime how can i make the field as Display Field in selection screen .
Thks & Regds
Shaileshhii,
Go to se38 and give the below progra name execute.... check the source code it is very easy to understand.
1.demo_dynpro_modify_simple
2.demo_dynpro_modify_screen
if tou are using grid,u can refer to foll link
sequencing / choosing fields in report screen at runtime,
Display the Columns in the grid at run time
rgrds,
Shweta -
Help Needed in At selection screen output
Hi Experts,
I need your help in AT SELECTION SCREEN OUTPUT event. My issue is i have 4 radio button and with each radio button couple of parameters that need to be filled in selection screen of report. My requirement is that sometimes user enters details in second radio button parameters but forgot to change the radio button to second one so kindly suggest a solution so that radio button gets selected as per user input in parameter like if user clicks on certain parameter to enter value then automatically corresponding radio button gets selected.
Thanks in advance for all your help.example from a checkbox in one of my progs..but you can do same approach with radio butts
parameters p_test as checkbox default abap_on user-command test.
at selection-screen.
if sy-ucomm = 'TEST'.
perform birth_mnth_chck.
endif.
Maybe you are looking for
-
Early 2008 Mac Pro + nVidia 8800: Never going to work?
This forum is littered with threads about early 2008 Mac Pros with the nVidia 8800 card - none of them positive. I was unfortunate enough to wait for Apple to release such a machine and buy it. Graphics performance is dire given the hardware availabl
-
[JS][CS3] Change "Start Peg Numbering at:""
Hello, I have a big problem on many InDesign Books with approx. 158 files each. In fact I have cut the InDesign files of approx. 400 pages in 158 files with 2 or 4 pages each but when I cut my reference document it was configured with "Start Page Num
-
I need help with a mapping issue.
We have a number of websites setup so that they are all under the default website in IIS 7. We use ISAPI/ReWrite/3 to process and take it to the correct page to view. Unfortunately this does not work so well with CFAJAX or CFFILEUPLOAD. Can anyone
-
Oracle object, nested table on a subtype
Hello, Is it possible to have a nested table on a subtype? If it is, can someone help me? Here is what I need help for: I have a supertype WORK, that have: multivalued attribute ADDRESS a attribute NAME, also the primary key The subtype is called EMP
-
Hello All, I have a requirement like this. For transaction C202, (Master recipe change), when I go to Materials->BOM and change material quantity, and save the document, an idoc should be created. We hve Idoc type, Message type and Object type copied