LogoffURL for ABAP Web Dynpro?

Hello,
Do we have the LogoffURL for ABAP Web Dynpro?
I would like the WD application to logoff to the URL on same browser window. Any ideas would be appreciated.
Thanks much,
Dharmi

Hi ,
add a paramenter url of type string to the exit plug
in my previous post replace with
l_ref->fire_<exit plug name>_plg( url = http://www.sap.com' ).
Regards,
Yashpal
Message was edited by:
Yashpal Gupta

Similar Messages

"Add To Browser Favorites" for ABAP Web Dynpro

Hi All,
In the Portal Environment, the end user has an option to "Add To Browser Favorites". This will trigger the "Add a Favorite" window in the Internet Explorer and the user can save the favorite as needed. Do we have a similar cabapility in ABAP Web Dynpro if the Web Dynpro is not delivered through an SAP Portal?
Thanks in advance for your help.
John

John Breen wrote:
Hi All,
>
> In the Portal Environment, the end user has an option to "Add To Browser Favorites". This will trigger the "Add a Favorite" window in the Internet Explorer and the user can save the favorite as needed. Do we have a similar cabapility in ABAP Web Dynpro if the Web Dynpro is not delivered through an SAP Portal?
>
> Thanks in advance for your help.
>
> John
No. There is no similiar option in the Web Dynpro framework, nor can you access JavaScript in order to interact with the web browser and supply this feature. Browser Favorites can be maintained by the NetWeaver Portal Framework or in the NetWeaver Business Client by the surrounding frame. In the case of the NWBC, it isn't actually browser favorites but a separate set of favorites merged with Easy Access Menu favorites.

Intial setup needed for ABAP Web DYnpro.

Hi,
I am using ECC 6.0, when I create a view in a component I am getting a system error. I understand there are some Initaial setup need to be done in SICF.
Could any help me out here.
Thank U 4 Ur time.
Cheers,
Sam
I am getting the following error, when I create a view in a component.
Service cannot be reached
What has happened?
URL http://sapdev01:8001/sap/bc/wdvd call was terminated because the corresponding service is not available.
Note
The termination occurred in system DEV with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:sapdev01_DEV_01-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Thank you for your time.
Cheers,
Sam

Hi,
see <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm">this</a> and the section on ICF and have a look at note <a href="https://service.sap.com/sap/support/notes/517484">517484</a> with a step-by-step procedure.
Regards, Heidi

ESS 1.2 - ABAP Web Dynpro Clarifications

Hi all,
We are on Ehp 2 in ECC 6.0 with ESS 1.2 in EP 7.0 and using only 'Travel & Expense' part for our implementation. I have below clarifications
1. In ESS 1.2 package we have an Overview page and iView, I believe it is for JAVA Web Dynpro, will this support for ABAP Web Dynpro iViews or how to bring ABAP WebDynpro applications with Overview ?
2. I have Mirrored the ESS PCD Content and modified only 'Invisible in Navigation Areas' parameter. Now the issue I am facing is while selecting button 'Create Travel Request' under 'My Trips and Expenses'. The request is fetching the original content navigation instead of the new Mirrored content. Also while debugging we find the routing 'Navigation Context' as below:
DynamicParameter=SAP_FITV_ACTION=&SAP_FITV_EXIT_OP=CallTripsPOWL&SAP_FITV_TRIPCMP=R&HistoryMode=1&NavigationContext=ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_travel_expenses/com.sap.pct.erp.ess.12.request
Is this parameter set by default to fetch the content ? Is it possible to change this entry, if yes, how ?
Kindly let me know if any clues.
Thanks!
Sankar Kumar

You need to replace the T&E portal content and Homepage Framework config (if using it) for the "older" Webdynpro Java version with the newer (EhP2) Webdynpro ABAP version. There is a very good step-by-step guide (I believe in Service Marketplace) that guides you through each and every change to make to switch one with the other. To your immediate questions...
(1) Those are the replacements for the WDJ iViews. They are pretty much the same. As said, you need to "switch them out".
(2) Switch out the WDJ iView with the WDA iView. The parameter needs to reflect YOUR ESS ROLE pcd path to the object. (the one you show is the standard SAP ESS role....which is fine if you are just using it as is).
Again, best to find that guide. I used it on my last project and it took all of maybe 30 min. to switch the old for new if you follow it.
Also, read all the help.sap.com info on it....
http://help.sap.com/erp2005_ehp_02/helpdata/en/2c/1ec6e9352c4766a4eb1ed0b924309c/frameset.htm

Guided Procedures Output Parameter and ABAP Web Dynpro

Hello,
does anybody know a way to use output parameters in Guided Procedures for ABAP web dynpros? It seems that this is only possible for JAVA based web dynpros.
Thank you for your help.
Regards
Ragar
Edited by: Ragar Chaudhary on Feb 19, 2008 4:54 PM

Hi,
the use of WDA with GP is restricted, see the [documentation|http://help.sap.com/saphelp_nw70/helpdata/en/45/c0d14601430039e10000000a11466f/frameset.htm]
Regards, Heidi

Creating 'Z' views for Standard ABAP Web dynpro Application

Hi Experts,
I am totaly new to ABAP web dynpro objects.
In our project there were some client requirements which required us to change the properties of the Views related to the Webdynpro. The Client now has said that he needs to apply some enhancement pathces on his system. Due to this, the changes made to the Views i.e all the changes done in standard code are lost.
The client now wants a long term solution where all the changes need to be done in 'Z' implimentataion so that changes are not lost every time the pathces are applied.
Is it possible to create an entire new 'Z' Views for the standard Webdynpro instead of standrad ones?
If Yes how does one link them to the Webdynpro application ?

Hi
Have a look at following article about enhancing webdynpro applications.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700317da-bd79-2c10-368e-8f18bf5d8b81?quicklink=index&overridelayout=true
Regards
Manas Dua

How to browse for a folder with ABAP WEB DYNPRO

Hi,
I want to browse for a folder in my local file system with ABAP
WEB DYNPRO. I am looking for a functionality which the function module
TMP_GUI_BROWSE_FOR_FOLDER gives.
Regards,
Vinay

HI Karl
Good evening, I am Maruti from London. I would like to paractise ABAP WebDynpro.I am not sure which Vesrion of SAP R/3 supports for ABAP WebDynpro applications. Can you please suggest me .
Thank you
Maruti
[email protected]

Use of multiple Applications for single webdynpro component in ABAP WEB DYNPRO

I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications ,it just creates a application how so we assign diff functionality to each of them .Also in the parameter tab of the webdynpro applications ,there is a diff config id mentioned for each application.what is its relavance

Hi Sam,
Different functionalities for a single webdynpro component can be achieved by many ways. Among them is the use of multiple applications. Say for example if you want different views/windows to be displayed at the start up, you can achieve it by specifying at the default window, for each every webdynpro application.
And if you want control the fields, say for example you want to display input fields as editable for one application and read only for other application, you can achieve it through application parameters. Based on parameters, in HANDLEDEFAULT method of window controller , you can specify the type of behaviour , whether it has to editable or not based on parameters and same can be used at context binding of UI properties.
Application configuration can be used for personalization.Web Dynpro ABAP Application Configuration. This tutorial would help you understanding the concept much better. There can be multiple application configurations for a single application.
Regards,
Harsha

Testing ABAP Web dynpro: Error code 403 and for the reason Forbidden

Hi,
We have NW04s Installed and trying to execute a SAP supplied ABAP web dynpro application DEMO_SIMPLE_MAIN. Please see the following error and let us know which service it's talking about? I am familiar with SICF. However in AS7.0( New name for WEB AS ) The transaction is little different.
Thanks
Arunava
However we are getting the following service error
Service cannot be reached
What has happened?
URL http://server.domain.name.com:8001/sap/bc/webdynpro/sap/demo_simple_main call was terminated because the corresponding service is not available.
Note
The termination occurred in system XXX with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:NAME999_XXX_01-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team

Hi,
this was actually some services which needed to be started through SICF. Once I have started the service sap/bc/public ETC.. and the web dynpro started working. Most of the SAP delivered demo apps are working
However for some ABAP web dynpro ( for some application XRPM ) I get some peculiar error. Please see below and if you could think of anything out of these.
I have already checked and found the both HTTP and SMTP services are working fine.
The following error text was processed in the system PXA : Syntax error in program /1BCWDY/56ZRPAZLU25M8S1BKV2T==CP .
The error occurred on the application server fmsap994_PXA_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
Method: CREATE_APPLICATION of program CL_WDR_CLIENT_APPLICATION=====CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP

Environment needed for developing, deploying the ABAP Web Dynpro

Hi all,
We have the following ECC environmnet in our office.
ERP 2005, RELEASE 6.0
KERNEL 7
COMPONENT ECC 6.0 NON -UNICODE SYSTEM
BASIS & ABAP SP 14
We also dont have Enterprise Portal and no PI or XI. can we develop ABAP Web Dynpro without EP?
I want to develop Web Dynpro's using ABAP. Can i do it? Do we need to install any thing else? any plug in..or do we need to upgrade our service pack?
We are on service pack 14 and on ABAP Stack.
Some one kindly help..this might be a simple question for many people...but i am really in need of information and could not get proper idea after reading the SDN and help.com
if some one has a link .that explains the environmnet that i should have for Web dynpro ABAP..please help.
Regards,
Jessica Sam

Thomas,
Thanks a lot for your patience. Few more minutes of your valuable time..need help.
So i can conclude that with my environmet and ABAP statck ..i can develop Web dynpro ABAP and BSP but not Adobe Forms.
We have BI system in our office which runs on Java Stack and our ECC system is only on ABAP stack.
But we were using ABAP Web services to build interfaces b/w SAP and .Net applications and hence we wanted to use SOAMANAGER,
But SOAMANAGER runs on Java Stack and we dont have Java stack on ECC but have on BI.
So what we did was..did some BASIS settings in BI and ECC systems and finally able to use SOAMANAGER of BI system to manage , create and deploy web services from our ECC system whihc is on ABAP Stack.
Similarly can I also use the Java Stack in our BI system and do some settings at ECC end such that I can buid the interactive forms in ECC and use the Java Stack of BI system.
Kindly please help..i am not getting answers to such questions in help.sap.com...may be people like you who are well experience will only able to guide me better.
Kind regards,
Jessica Sam

I want weblog or tutorial for component usage in abap web dynpro

Hi team,
I want to know how component usage works in abap web dynpro.so can you please help me with providing a tutorial and step by step to use component in it.
Thanks,
Mainak

Hi Mainak.
In https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11">tutorial [original link is broken] [original link is broken]
Hope this helps.
Cheers,
Sascha

Error while accesing ABAP web dynpro application

Hi Experts,
We are getting warning symbol on web page status bar, when we are accessing the ABAP web dynpro application
only first page of application is getting loaded and when we click on page it is showing error on status bar and we can perform any thing.
once we double click on warning icon,
below details are coming:
Line: 1491
Char: 3
Error: Object Expected
Code: 0
URL: url of the ABAP web dynpro application
This scenario is occuring for many ABAP WD application for a client.
Please guide how to solve this issue?
Thanks!
Piyush

Hi
First try a very simple application with nothing in it just one text saying Hello World
Run it and see what happens.
Also check if your url uses FQDN name. something like https:
company.name.co:50000\.......
If you do not use the FQDN it will always show a script error on the bottom and some functions will not work e.g
dropdowns.
regards
Yuval.

HTTP 500 internal server error while starting abap web dynpro application

Hi there,
i have some problems concerning my web dynpro abap configurations in the system. When i start an application the browser appears and displays the http 500 internal server error. The required icf nodes are activated, as far as i know. the following properties are set:
hostname: aet
port: 8000
The generated url for the web dynpro application looks as follows:
http://aet.ls3001:8000/sap/bc/webdynpro/sap/zwdr_test?sap-language=EN
Maybe anybody of you out there has an idea for that situation.
Thanks for your afford and kind regards,
Albert

Hi Ulli,
the error message says:
UNKNOWN HOST
Description: Unable to locate the server named "aet.ls3001" --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
So the problem is the hostname.
When i replace the hostname with the ip of the server, the following error occures:
COULD NOT CONNECT
Description: Could not connect to the server "10.18.187.9".
But with SAPLogon, its possible to connect on the server by filling in the ip adress.
Kind regards,
Albert

ABAP Web Dynpro iView error

My ABAP Web Dynpro iView encouters errors:
The URL http://sp06:8004/sap/bc/webdynpro/sap/z_jgo_demo// was not called due to an error.
Note
The following error text was processed in the system SB2 : WebDynpro Exception: Error in UCF Template POPUP_PAGE ($).
The error occurred on the application server sw06_SB2_04 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: RENDER_TEMPLATE of program CL_WDR_UCF====================CP
Method: HANDLE_TEMPLATE of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
I was able to run the ABAP web dynpro application outside of portal by using the url: http://sp06:8004/sap/bc/webdynpro/sap/z_jgo_demo/. But with the extra / at the end, I get the same error.
Can anyone point me to how to remove that extra / at the end?
Thanks
Ben

Hi Gurus ,
We have upgraded the SAP HR system from ECC6.3 to ECC6.4 and netweaver from 7.0 to 7.1 .
Following are the list of error in EHP4 system ,
1) Layout of ABAP Webdynpro Component are not displayed .
2) Any ABAP WEBDYNPRO Application is not displayed by tesing in SAP-R3 and also in ESS .
error are as follows while trying to view layout in abap webdynpro application :
http://dv.hr.co.in:4567/sap/bc/wdvd/painting.html?_vdrespkey=4IS29CT7NDRIOI511AFI0R1E3&_vdframe=painting&sap-client=435
If any one have information for this kindly let me know .
Thanks :
Vishwas

IView not found error when excuting ABAP Web Dynpro iView

Hi Experts,
I have created one ABAP Web Dynpro iView for an existing Application.
Parameters I have passed for iView creation.
Namespace : sap
Application Name: SampleApp
System Name: R3_SYS.
Can any one please pass on me the details what are the mandatory parameters need to be passed.
Thanks in Advance,
Chinna.

Hi Chinna,
You need to check the following parameters like
Namespace - should be 'sap' as this is root node in SICF
Application Name: - check name of WD application in se80
Please refer to below thread for creating WD ABAP iview.
Re: Webdynpro ABAP iView Blank Page
Web Dynpro for ABAP iVIew's Namespace parameter
how to create iview from webdynpro application abap
Hope it helps
Regards
Arun

LogoffURL for ABAP Web Dynpro?

Similar Messages

Maybe you are looking for