Logout on window close.

Hi,
I want to logout from my application on window close & window tab close, when user directly closes window or tab, bypassing LOGOUT facility in application.
By googling couldnot find good results. Please foward any link or example.
Platform - Jdev 11.1.1.3 with ADF Faces & BC.

ok fine.
thanks confirmation.
i think this your requirement:
when i hit close icon of browser means application should be get's log out.
can you go here.
here timo says, your sound little bit same.
Browser is closed. ctrl+shift+t to repon the closed tab.session is mainted.
The answer to the first question is that you can't do this. The problem is that you can't control the browser behavior when you use the close tab (x) or close >browser (x). The browser just closes the tab or window without giving you any event to act on. You may play with the uncommitted data warning, but it >won't work under all circumstances.
The 2nd question can't be handled either as you don't get an event for the closing tab. So you can't invalidate the session. If you reopen the tab the browser >uses the last URL for the tab, which has the old state information. As you did not invalidate the session the information is still valid and there is no way to know >that the url was originally from a closed tab.
In summary, as long as the browser don't send an event to the app running in the browser or tab, which then can be used to interrupt the closing, there is not >solution.Edited by: ADF7 on Mar 19, 2012 3:35 AM

Similar Messages

Handling logout and window close

How can I do to invalidate the session when user closes the browser windows. Invalidating session is done in logout.jsp page? Thanks and excuse me for my english!!

The server has no way of telling if a browser window is open or closed. All it can say is the last time it received a communication from it.
A session will invalidate itself after a timeout (standard 30 minutes).
The most common solution is to use a javascript onUnload event to pop up a new window and go to the logout.jsp page. Its been discussed several times on this forum

How to detect the HTML extension window close in In-design? Does the In-design throws any event on opening/closing of extensions?

How to detect the HTML extension window close in In-design? Does the In-design throws any event on opening/closing of extensions?
I have a HTML extension running in In-design CC 2014 version.
I want to perform some required set of actions before my extension window is closed(by clicking on the cross button on top right corner).
Does In-design throws any event for it? Or can we capture it using C++ plugin in some way?

Naah.......haven't got any event for that yet.
Although, since HTML extensions are using chromium browser, as a workaround, u can attach listener to HTML onClose event, but it won't solve any purpose if you
are looking to logout session or do some business login in your code.

Force code execute when user closes OOB lightswitch app using the windows close red X

I've created a lightswitch app using Forms Authentication. If the user closes the application using the window close red 'X', I need to update a custom user profile table. Is this possible?

I use this code and it works!
I handle the closing event of the user and I break it, execute my code ed after closing the application.
Under you see the code that I use in my application.vb :
Public Class Uscita
' Dichiara un evento per la classe
Public Event Event1()
' Definisce un metodo per richiamare l'evento
Sub CausaEvento()
RaiseEvent Event1()
End Sub
End Class
Protected Sub EsceAPP()
Dim Obj As New Uscita
AddHandler Obj.Event1, AddressOf Me.EventoUscita
' Provoca l'esecuzione dell'evento
Obj.CausaEvento()
End Sub
Sub Eventouscita()
Dispatchers.Main.BeginInvoke(Sub()
RemoveHandler _mainWindowClose.Closing, AddressOf MainWindow_Closing
System.Windows.Application.Current.MainWindow.Close()
End Sub)
End Sub
Private Sub Application_loggedin()
Try
Dispatchers.Main.BeginInvoke(Sub()
_mainWindowClose = System.Windows.Application.Current.MainWindow
AddHandler _mainWindowClose.Closing, AddressOf MainWindow_Closing
End Sub)
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
End Sub
Private Sub MainWindow_Closing(ByVal sender As Object, ByVal e As ClosingEventArgs)
If MessageBox.Show("Vuoi Veramente uscire?", "Conferma", MessageBoxOption.OkCancel) = Windows.MessageBoxResult.Cancel Then
'Elimina l'uscita utente
e.Cancel = True
Else
'Interrompe momentaneamente l'uscita dell'utente per eseguire l'aggiornamento della tabella utenti loggati
e.Cancel = True
'Aggiorna la tabella utenti loggati ed esce dall'applicativo
Me.Details.Dispatcher.BeginInvoke(Sub()
Dim ws = CreateDataWorkspace()
Dim query = ws.ApplicationData.UtentiLoggatis.Where(Function(c) c.UserName = Me.User.FullName).FirstOrDefault
query.OnLineImage = MyImageHelper.GetImageByName("RedLight.png")
query.OnLIne = "OFF"
query.Logout = Now
ws.ApplicationData.SaveChanges()
'Chiama la routine per uscire dall'applicazione
EsceAPP()
End Sub)
End If
End Sub

Problem with window.close and window.open

I am having two suspected Actionscript problems which only seem to be happening with Flash player 9 and later.
BACKGROUND:
I have a client who needs browser-launched swf files to play from a CD-ROM (I do not want to use the Flash projector). These files were created a few years ago using Actionscript 1 & 2 code and everything has worked perfectly until now.
Here is the setup:
First, an autorun file on the root of the CD runs and writes a 'trust file' to the 'Macromed' directory. The autorun next launches 'index.htm' which is simply an html page containing a series of links (topic1.htm; topic2.htm; and so on). Next, let's assume the student clicks the 'topic1.htm' link from the 'index.htm' page. The 'topic1.htm' link launches a web page (also located on the CD) which contains and displays 'topic1.swf'. So far, everything works fine.
Here is where the two problems happen.
Problem 1:
I have an 'Exit' button within each swf (remember each swf is contained inside an html page). The 'Exit' button has always worked properly, but suddenly does not work in Flash player 9. I am using the following Actionscript 2 code on the 'Exit' button:
on (release) {
getURL("javascript:window.close()");
The 'Exit' button has always worked using this code (and still works in Flash player 8 and lower). However, it does nothing when played using Flash player 9.
Problem 2:
There are links to html popup windows within the 'topic1.swf' file (remember 'topic1.swf' is contained inside 'topic1.htm'). Each popup window contains a swf file that is used to present a demonstration. When the student clicks the 'demo1.htm' link from 'topic1.swf', an html popup window SHOULD load and display 'demo1.swf' inside the 'demo1.htm' window. The main ('topic1.htm') window stays open so that the student can return to the topic after completing the demo. This has always worked properly until Flash player 9. Here is the Actionscript 2 code
which I am using on the button inside 'topic1.swf' to launch 'demo1.htm':
on (release) {
getURL("javascript:launchWin2('webpage2.html');");
ADDITIONAL INFO:
'topic1.htm' contains the following code which is used to support the Actionscript code listed under 'Problem 2' above.
<SCRIPT LANGUAGE=JavaScript>

</SCRIPT>
I would appreciate any help anyone can offer. I am wondering if the problem has to do with a need to use ONLY Actionscript 3 code from Flash player 9 onwards.
Thanks!
Terry

You may have '''Switched ON Caret Browsing'''. press '''F7 (on Mac: fn + F7)''' to toggle '''Caret Browsing ON/OFF'''
* click '''Firefox''' button and click '''Options''' -> Advanced -> General -> remove
Checkmark from '''Always use the cursor keys to navigate within pages'''
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* http://kb.mozillazine.org/Accessibility_features_of_Firefox
Check and tell if its working.

FF31: When I only have one tab open, even a blank one, and close the tab the window closes.

FF31: When I only have one tab open, even a blank one, and close the tab the window closes.

Type '''about:config''' in the Location bar and hit '''''Enter'''''.
''Accept the warning.''
'''browser.tabs.closeWindowWithLastTab'''
double-click to toggle to '''false''' and then restart Firefox.
Now if you close the last tab the window (or Firefox) won't close, but a New Tab will be there.

W/zoteroinstalledwedo a window,open() followed by a window.close() in tha window. Zotero remains and the window is still open. How do I close the window with zotero present in FF w/o disabling zotero?

the js function to window.open() is in pageAA on a tab.
We click the form or link to open the popup to run a video.
We have a close button on the popup window.
When that is clicked the window.close() js is executed on that page leaving Zotero present and the popup still open.
We've tried using close() window.close() name.window.close() and
all fail the same way.
Short of disabling Zotero is there a way to close the popup in FF and any other addons with one shot?

Thank's but still no fix.
In safe mode everything works.
Without Zotero - everything works.
When the popup is loaded with Zotero, the tab shows a constant "Loading" with the circular in process icon.
The Zotero icon shows to the left of the tab.
If I right click on Zotero and close it, the close() js works properly
Is there a way to do a window.open() with:
A. no tabs -or-
B. block all add on's -or-
C. to kill an add on
before doing the close()?

IPad Safari IOS 5 window.close() closing wrong window

When I want to close the child window(although now they open as tabs) in the parent window with javascript window.close(),the parent window was closed.
Is this a bug or have any solution?
Safari/7534.48.3
My script:
<script type="text/javascript">
var subWin1 = null;
function popSub() {
subWin = window.open('myurl,'subWin1','height=200,width=200');
function closeSub() {
subWin.close();
</script>

I'm having the exact same problem. On iPad Safari on iOS 5 attempting to close a popup window with close() is causing the parent window to close instead. Every other browser, including iPhone Safari on iOS 5 it works fine. I've been trying to come up with a workaround but haven't found anything yet. If anyone can find a workaround please post.

Finder Window closes when File is Deleted in 10.6 Server

I'm running OSX 10.6 (Snow Leopard) on an XServe serving 50 Mac Pros. I work with two finder windows open in column view with no side bar. This allows me to navigate and move files from any of 50 computers I have mounted to my server to another computer.
If there is a folder on the Desktop of one of the many computers I'm connected to, and it's the only thing on that Desktop of that computer, when I delete the folder the finder window I deleted the file from closes. In 10.5 my two windows would remain open no matter what I deleted. If there are other things on the Desktop the finder window will stay open when I delete any of the files, unless I delete them all and then the window will close.
Also if a drive is mounted and I unmount the drive in column view, this will close my finder window as well, even though all my other computers are still mounted in that window. In Leopard (10.5), if I unmounted a drive or deleted files off any computer mounted to my server, that window would remain open.
Furthermore, in column view with a side bar, when I delete the only folder on a computer's Desktop my finder window will not close, but it will kick me back to the side bar instead of leaving me on the desktop of the computer I was deleting the file off of. This is just about annoying as having the window close, because I still have to navigate back to the computer I was working on.
I think it's just a new way 10.6 handles this stuff. It seems if there is nothing left in a folder (such as a Desktop) then Snow Leopard assumes you don't need that window open and closes it. Any ideas? Thanks for the help.

By the way, I'm running Snow Leopard Server, not simply Snow Leopard.

Closing Report Preview window closes all parent windows

I have a form 6.0 calling a report 6.0 with several user parameters using run_report_object in preview mode. After the finishing previewing, the user closes the report preview window. Then the preview window closes all the parent windows.
Need help!
1) The parameters are char, date and number types.
2) I don't have a parameter form. I take out the high-light of the parameters on the parameter form and the parameter form title.
3) I have several user parameters and without the parameter form i'm still able to pass the parameters from the Form.
Thanks
null

report_other parameter can only take 255? characters.
I use create parameter list and add_parameter instead.

When closing Firefox windows, I would like a warning before the last window closes. The about:config settings do nothing. There is a warning for multiple tabs..

When closing Firefox windows, I would like a warning before the last window closes. The about:config settings do nothing. There is a warning for multiple tabs... why not for the last window? I do not use tabs... just windows... I have a mouse button programmed for that. It is really irritating to have to restart Firefox all the time and then open the history window because no warning was issued!

This is ridiculous. I've had this problems for years now and I'm finally walking away from Firefox. I use my keyboards more than my mouse, and how many times does your finger slip and hit Command Q instead of W. How come FF can't reset something as trivial as this? So many people are having problems with this?
Feels like FF has become too big, too slow and just not cooperative anymore. What a shame, I've been using Netscape/Firefox for 13 years. This is silly.

My dad has a brand new iMac. If he quits an app, this window closes, but the app won't finish shutting down, Force quitting does not work. Once another app is opened, it will not close either. Now none of the apps are responding. Any ideas?

My dad has a brand new iMac. If he quits an app, this window closes, but the app won't finish shutting down, Force quitting does not work. Once another app is opened, it will not close either. Now none of the apps on the dock are responding. I asked him to click on the apple, and drop down to "About this Mac", but that wouldn't open either. Any ideas? If I was at his house, I would call Apple Care in a heartbeat, but am home with my sick daughter,,, Thanks!

For starters, have him open Disk Utility in Applications>Utilities, select the volume (the indented listing) and Verify Disk. If it reports any problems, have him try a Safe Boot by holding the Shift key at startup. This boot will take much longer than usual. It's checking and trying to repair the drive directory, if possible. Once in Safe Boot, have him repair Permissions.
For other Disk repair remedies see
http://support.apple.com/kb/TS1417
Also, have him try a PRAM Reset. At the startup chime, hold down CMD-Option-P-R together, listen for two more chimes, total three, then let go to finish booting.
Also, is he running any AV? If so, have him uninstall it. It might be responsible for this behavior. (There are no viruses for OS X.)

ITunes Match Step 3 doesn't load, Windows Closes iTunes. Solution?

Since October 27, 2013 have not been able to get all 3 steps of the iTunes Match to complete. Steps 1 & 2 load correctly and a green check mark appears for each. However, when things move to Step 3 an error message immediately appears that indicates "iTunes has stopped working", and Windows closes iTunes.
My laptop is running Window 7. Apple Tech Support had me uninstall all components of iTunes and then (re)load the latest version on my laptop. All music in my iTunes library has always played correctly on my iPod Classic. (Note: the iPod Classic has not been synced sinced the problems with the iTunes Match load surfaced as I am fearful of corrupting what's there. Which also means all recent iTunes store purchases cannot be played on the iPod classic until it sync'd.) Accessing the iTunes music library on the iPod Touch shows that some tracks are greyed out and not available which seems consistent with the failure of Step 3 to load. Need help. Thanks.

Hi,
Try holding shift key whilst turning off match. This will clear genius / match cache. Close iTunes then reopen. Turn on match, you will be asked to add this computer, do so and let process complete.
You should also add iCloud status column to song view - menu > view > view options and tick box. This will tell you what has been matched, uploaded, purchased, duplicate or inelligible. It will show tracks that have not been processed as "waiting". If you have any such tracks, one or more may be preventing completion. You may need to remove such tracks and gradually readd until match processes them. This may help identify problem tracks.
Jim

Print Templates print preview window closes unexpectly when printing document

This is a cross posting from Internet Explorer Web Development after a suggestion that this forum would be a better location. See
https://social.msdn.microsoft.com/Forums/ie/en-US/351e1245-b606-4467-9f3c-1c72f9cdf9ea/print-templates-print-preview-window-closes-unexpectly-when-printing-document?forum=iewebdevelopment.
I have raised an issue through Connect for this:
https://connect.microsoft.com/IE/feedback/details/1134168/ie9-to-ie11-print-templates-print-preview-window-closes-unexpectly-when-printing-document, but I would like some more visibility of the issue as my customers thought my application was closing when
they printed a document. I also don't know if an issue in Connect gets any priority support via MSDN, but this forum does.
This looks to me like a problem in the IE Print Templates startDoc API call, but if there is a more appropriate forum to raise this issue in please let me know.
In the application where I use print templates, the window closing is not in it self a problem because the Javascript that is calling startDoc also closes the Print Preview window when the print is finished.
The fact that the application looses focus and can be hidden by the windows of other applications when the Print Preview window is closed by startDoc is the issue noticed by our customers, so I need a fix preferably, or a work around at a pinch.
Details of the issue reproduced below.
When using IE Print Templates, the startDoc function is causing the print preview window to close. This behaviour started with IE9, and is still present with IE11.
When an application is using print templates (see
https://msdn.microsoft.com/en-us/library/aa753279(v=vs.85).aspx) for print functionality, this has the effect of causing the application to become hidden by any other application window once printing from the print preview window has started. It is
actually this behaviour that started me looking at this issue as the users thought the hosting application had closed.
Print Templates are not accessible by using IE as a web browser, but only when using the WebBrowser Control to embed IE in an application. The reference for this feature is available from this url:https://msdn.microsoft.com/en-us/library/aa753279(v=vs.85).aspx
and a sample Microsoft application that demonstrates the use of Print Templates can be used to demonstrate the problem (required for the reproduction steps). The application is available via this article and searching for "download spiffy".
Steps to reproduce the problem:
To see the full effect of the issue, first ensure there is a window from another application (like Windows Explorer) that will cover the sample applications window if brought to the foreground (making the Windows Explorer window full screen works).
Start the sample application (and ensure that the full screen Window Explorer is the next application to activate).
Then in the drop down box in the top right corner of the UI select Template8.htm.
Click the Print Preview button that is just below the drop down box (this will open a new Print Preview window).
In the new window click the Print… button (this will open a Print dialog).
Click the Print button at the bottom of the Print dialog.
The Print dialog closes (expected) and then the Print Preview window also closes (not expected), however the document is still printed successfully.
When the Print Preview windows is closed unexpectedly, the Windows Explorer window is brought to the foreground (obscuring the sample applications window).
If you reselect the sample application and click the Print Preview button again, the Print Preview dialog is not displayed unless you restart the application (this looks to be a symptom of the same issue, not a separate problem).
To see that the Print Preview window appears to be closed by the startDoc call, use the resource editor in Visual Studio (the exe can be opened directly by File | Open | File…) to edit the HTML resource "TEMPLATE8.HTM" (I found I needed to delete
it and add it back in for the change to stick), find the startDoc call and add two alerts, one on the line before and one on the line after. When IE is accessing the template, it is being done using the name of the executable (so do not rename the modified
version of printtemplates.exe, make the changes to a copy in a different directory if you don't want to change the original). Start the modified version of the application and follow the same steps as in the reproduction. This time, after clicking
the Print button in the Print dialog, the dialog will close, the first alert will pop up, then the Print Preview window will close, then
the second alert will pop up.
Thank you,
Warren.

Hi Shu,
I have noticed that the print templates API is listed as part of the Legacy APIs.
Is this just because it hasn't changed or is not new? Or does this mean that it is no longer maintained and may be removed (or at least deprecated) at some point in the future?
It would good to know if we should start planning for the implementation of a different method of printing.
I understand that the sample application is no longer maintained, but I also think that the Print Template API that it uses has not changed, and so should still work (and it does mostly).
If the Print Preview window was being closed as a result of using the Print dialog (and if it had behaved the same way with IE8) I would be willing to go with the by design argument.
I have found that the Print Preview window is not closed until startDoc is called, and it closes before control is returned from the startDoc function.
Just as part of investigating and try to find a workaround, if I call window.close(), any alert calls made no longer display the alert window after the close call.
Alert still functions after startDoc has closed the window however.
The is not the sort of consistent behaviour I would expect from something that is by design.
Also while investigating, I found that calling startDoc after calling window.close() results in an exception with the error code -2147467259 (0x80004005), this is probably quite normal and expected, but does indicate that the Web Browser Control should
not be closed till after printing.
I had found that old thread, and I had concluded it was the same issue, but it was also aimed at different aspect of the problem (which I see in the sample application, but not my application).
The visible issue I have is that my users think the application has been closed because after clicking print (on the Print dialog) the application gets hidden by other windows from other applications.
This aspect affects the sample in the same manner and so it was a convenient way to demonstrate the problem.
If IE connect do not look at this issue any time soon, do I have any other avenues to resolve this issue?
Thank you,
Warren.

Problems using window.close() and setting fields

Hi,
I have two problems:
First one is:
I created a simple JSP with 'Save' and 'Exit' Buttons. In the Exit button on click event I invoked a function closeWindow, which calls teh window.close(). But on clicking Exit, the window does not close. Can anyone please tell me why.
Second one is:
The JSP also needs to get loaded with some values in the Textfields. Theses values are extracted from a text field using a Java class. I am able to see that these values are extracted from the text file and are loaded into Java vars, but when I am trying to set this value into a text field, it is NOT getting set.
(filePathDetails is the instance of the class that extracts the text values)
The entire code is posted below:
<%@ page language="java" import="ftpScheduler.*" contentType="text/html; charset=ISO-8859-1" pageEncoding="ISO-8859-1"%>
<% FolderPathInfo filePathDetails = new FolderPathInfo(); %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>PATH DETAILS</title>
    <SCRIPT type="text/javascript">
     function setPaths(){
          with(document.pathDetails){
               textAncPath1.value = <%=filePathDetails.localDirPath1 %>;
               textAncPath2.value = <%=filePathDetails.localDirPath2 %>;
               textArchivePath.value = <%=filePathDetails.archiveDirPath %>;
               textLogPath.value = <%=filePathDetails.logFilePath %>;
     function closeWindow(){
          window.closeWindow();
    </SCRIPT>
</head>
<body bgcolor="#c0c0c0" onload="setPaths()">
     <FORM name="pathDetails" method="get" action="DetailsServlet.java">
     <FONT face="Arial" size="3"><STRONG>Directory Paths:</STRONG></FONT>
     <BR><BR>
     <TABLE border="0" cellspacing="" height="60" width="450"
                                                  style="FONT-SIZE: 10pt; FONT-FAMILY: Arial" align="center">
     <COLGROUP>
     <COL width="45%">
     <COL width="55%">
     </COLGROUP>
     <TR>
     <TD><LABEL>Ancillary Transmit Path1 :</LABEL></TD>
     <TD><INPUT type="text" name="textAncPath1" width="290" maxlength="350"/></TD>
     </TR>
     <TR>
     <TD><LABEL>Ancillary Transmit Path2 :</LABEL></TD>
     <TD><INPUT type="text" name="textAncPath2" width="290" maxlength="350"/></TD>
     </TR>
     <TR>
     <TD><LABEL>Archive Path :</LABEL></TD>
     <TD><INPUT type="text" name="textArchivePath" width="290" maxlength="350"/></TD>
     </TR>
     <TR>
     <TD><LABEL>Log File Path :</LABEL></TD>
     <TD><INPUT type="text" name="textLogPath" width="290" maxlength="350"/></TD>
     </TR>
     </TABLE>
     <P align="center">
          <INPUT type="submit" name="buttonSave" value="Save">
          <INPUT type="button" name="buttonExit" value=" Exit " onclick="closeWindow()">
          <BR>
     </P>
     </FORM>
</body>
</html>Please help me.
Thanks in advance.

Try the following..
For problem 1:
Use window.close() instead of window.closeWindow().
For the second problem
don't call the function setPaths() at onload. Rather
call the function after the page is loaded. You can
try like this.
If it doesn't work then check whether the browser is
giving any JavaScript error message.
<SCRIPT type="text/javascript">
setPaths() ;
     function setPaths(){
     alert(document.pathDetails.element[0].value);
document.pathDetails.element[0].value =
= <%=filePathDetails.localDirPath1 %>;
          alert(document.pathDetails.element[0].value);
          with(document.pathDetails){
textAncPath1.value =
e = <%=filePathDetails.localDirPath1 %>;
textAncPath2.value =
e = <%=filePathDetails.localDirPath2 %>;
textArchivePath.value =
e = <%=filePathDetails.archiveDirPath %>;
textLogPath.value = <%=filePathDetails.logFilePath
ath %>;
     function closeWindow(){
          window.closeWindow();
</SCRIPT>Hi,
Actually I did try window.close(), but I still am not able to close the current window.
And as for the problem of setting up the field values, sorry the given solution doesnt seem to work. :-(..
I have pasted the entire code, I dont know where teh flaw is. Please review the same and let me know.
Your help is very much appreciated.
<%@ page language="java" import="ftpScheduler.*" contentType="text/html; charset=ISO-8859-1" pageEncoding="ISO-8859-1"%>
<% FolderPathInfo filePathDetails = new FolderPathInfo();%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>PATH DETAILS</title>
     <SCRIPT type="text/javascript">
     function setPaths(){
          document.pathDetails.textAncPath1.value = "Anything";
          with(document.pathDetails){
               textAncPath1.value = <%=filePathDetails.localDirPath1%>;
               textAncPath2.value = <%=filePathDetails.localDirPath2%>;
               textArchivePath.value = <%=filePathDetails.archiveDirPath%>;
               textLogPath.value = <%=filePathDetails.logFilePath%>;
     function exitWindow(){
          window.close();
    </SCRIPT>
</head>
<body bgcolor="#c0c0c0">
     <FORM name="pathDetails" method="get" action="/FTPSchedulerApp/ftpScheduler/DetailsServlet.java">
     <FONT face="Arial" size="3"><STRONG>Directory Paths:</STRONG></FONT>
     <BR><BR>
     <TABLE name="tempTable" border="0" cellspacing="" height="60" width="450" style="FONT-SIZE: 10pt; FONT-FAMILY: Arial" align="center">
     <COLGROUP>
     <COL width="45%">
     <COL width="55%">
     </COLGROUP>
     <TR>
     <TD><LABEL>Ancillary Transmit Path1 :</LABEL></TD>
     <TD><INPUT type="text" name="textAncPath1" width="290" maxlength="350"/></TD>
     </TR>
     <TR>
     <TD><LABEL>Ancillary Transmit Path2 :</LABEL></TD>
     <TD><INPUT type="text" name="textAncPath2" width="290" maxlength="350"/></TD>
     </TR>
     <TR>
     <TD><LABEL>Archive Path :</LABEL></TD>
     <TD><INPUT type="text" name="textArchivePath" width="290" maxlength="350"/></TD>
     </TR>
     <TR>
     <TD><LABEL>Log File Path :</LABEL></TD>
     <TD><INPUT type="text" name="textLogPath" width="290" maxlength="350"/></TD>
     </TR>
     </TABLE>
     <div align="center">
          <INPUT type="submit" name="buttonSave" value="Save"/>
          <input type="reset" name="buttonReset" value="Reset" onclick="setPaths()"/>
          <button name="buttonExit" onclick="exitWindow()"> Exit </button>
          <BR>
     </div>
     </FORM>
</body>
</html>

Logout on window close.

Similar Messages

Maybe you are looking for