Logs and Alerts Configurations.

Hi Everybody,
I’m newbie in XI, this is my first project and I need some ideas!
I’ll appreciate any help
The Scenario is something like this:
Portal 6.0 with an iView to upload the xml file to XI. This iView is accessed to various users that are assigned to different organisms. So Portal does the distinction from user/organism. 
The XI does the mappings and sends to R/3.
When some errors on processing occur in XI, I would like to send an Alert to the user who is responsible for the organism.
I know that XI have an Alert configuration, I read something and I feel that Alert Management works well when is configured for one Administrator responsible to manage XI.
See this situation: users in organism AA do an upload to XI. This processing generates an error. I am the user responsible for this organism and I would like to receive an alert in my inbox or another e-mail box to notify me about the error in question.
I need to determine in runtime who are the user responsible/organism, who have permission to receive the notification! There are some ways to configure Alerts to do something like this?
Another doubt
In the same scenario, I would like to show a XI error log in the Portal!
I’m thinking something like this: In one iView and with ITS, I call SXMB_MONI transaction within selection criteria needed to show only the errors occurred for the user who sends the file. But before this, I need to know the parameters of the message to put in selection criteria of SXMB_MONI (ex. message-id).
How I can get these parameters (ex. message-id) in Portal from XI?
About this idea, any one with better suggestions?
Thanks for all
Best Regards,
Ricardo.

Hi Ricardo,
Check these threads for alert configuration in XI and alerts via e-mail...
Re: Alerts
Re: how to configure alert to send a mail
Anand

Similar Messages

  • CCMS,CMS and alert configuration guides

    hi,
    can I have CCMS,CMS and ALERT configuration pdf guides or links please.
    I have searched for them on SDN but can't find the exact documents.
    thank you for your help.

    Hi Babu,
    Please find the below links for reference.
    <b><i><u>CMS :</u></i></b>
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
    <b><i><u>CCMS :</u></i></b>
    /people/dirk.jenrich/blog/2007/01/21/how-to-use-the-monitor-set-sap-ccms-technical-operation-templates
    <b><i><u>ALERT :</u></i></b>
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0b4580be-0601-0010-d3ad-bd6ce51ae916
    <u><i><b>How to guides:</b></i></u>
    Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken]
    <i>Thanks & Rgds</i>
    <b>J</b>

  • I can no longer use all of the "Computer Management" tools against a remote computer. "Local Users and Groups", "Event Viewer", "Performance Logs and Alerts" and "Device Manager"

    Hello All,
    I can no longer use all of the "Computer Management" tools against a remote
    computer. "Local Users and Groups", "Event Viewer", "Performance Logs and
    Alerts" and "Device Manager"
    kindly see the below snapshot for assistance
    REGARDS DANISH DANIE

    This link may help....
    http://windowsxp.mvps.org/admintools.htm
    Freeman

  • Did Not Find Alert Inbox and Alert Configuration Page

    Dear All,
    I if i click on Alert Configuration and Alert Inbox in Runtime Workbench, It is showing 404 NotFound.
    Please help us
    Regards
    Kumar

    Dear Jay,
    Thanks for your Quick response.
    In my Runtime workbench If I open AlertConfiguration and AlertInbox It is showing 404 NotFound .
    For that Iam following Michal Blog Question Number 13 in IE
    /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
    I have Run the program : RSXMB_ACTIVATE_ICF_SERVICES
    and iam checking SAP note: 750287 (XI 3.0 Runtime Workbench: Alert configuration does not start) and change values in your ExchangeProfile
    iam chaning values in Exchange profile in Runtimeworkbench.
    com.sap.aii.rwb.server.centralmonitoring.httpport
    i dont know here Basis team given proper values in that, if they didnot give those values ,how can i find those values.
    Regards
    Kumar

  • Best practice for Error logging and alert emails

    I have SQL Server 2012 SSIS. I have Excel files that are imported with Exel Source and OLE DB Destination. Scheduled Jobs runs every night SSIS packages.
    I'm looking for advice that what is best practice for production environment.Requirements are followings:
    1) If error occurs with tasks, email is sent to admin
    2) If error occurs with tasks, we have log in flat file or DB
    Kenny_I

    Are you asking about difference b/w using standard logging and event handlers? I prefer latter as using standard logging will not always data in the way in which we desire. So we've developed a framework to add necessary functionalities inside event handlers
    and log required data in the required format to a set of tables that we maintain internally.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Mapping logic and alert configuration

    My scenario is Asynchronous. No BPM in this scenario
    Sender & receiver data type is like this
    HEADER
       HedgId
       ItemNo
    ITEMDATA
      Month
      Vol
      Hsfo
    Conditions are: Sender side
    1). If above fields are come to blank into Xi (means no value in the fields) alert will trigger and send that alert to Alert inbox. Above HedgId and ItemNo field values are empty how can send the alert to alert in box. How can do the field value is mandatory for this particular fields.
    2). At least one above Itemdata is mandatory (for this I did occurrence are 1:1) is it right? If there is no item data come to xi with empty fields xi has to send the alert to alert inbox. (here also item data and remaining fields and fields data are mandatory) if I put occurrence as 1:1 if the fields come to xi with no values also mapping will be pass. How can I make to value of the field is mandatory.
    please suggest me how to do this.

    Hi,
      In target structure, if you kept occurance 1-1 then filed is mandatory.It means the source file the filed not exits then you can get the error in message mapping.item data you need to keep 1-unbounded occurance.If field exits and have no values then that time map like below.
    Source fieldlengthequalsS(constant(0))notIfwithoutelse(Source field)---TargetField.
    Regards,
    Prakasu.M

  • Alert Configuration UserName

    Hi,
      We have some problem with alert configuration in RWB. When I started working on alert configuration we could not get anything except an error message.  We found that we have made some mistakes in Exchange Profile which we changed. Now we are getting a popup where we are supposed to give the username and password to log into the alert configuration and alert inbox. The problem lies here, we are not able to login with any user. Need help in this regard.
    What are the steps that has to be taken to get this alert configuration working (I checked in Help and also applied related notes)
    Which user has the authorization to log into alert configuration of RWB?
    Regards,
    Vedavyas
    Message was edited by: Vedavyas Cuntheepuram
    Message was edited by: Vedavyas Cuntheepuram

    Hi ved,
    the roles reuired to access the RWB are:
    1. SAP_XI_RWB_SERV_USER
    2. SAP_XI_RWB_SERV_USER_MAIN
    The roles for the Alert Management are:
    1. SAP_ALM_ADMINISTRATOR
    2. SAP_ALM_CUSTOMIZER
    3. SAP_BC_ALM_ALERT_USER
    Follow the below steps to make the alerts working:
    1. create an Alert category Tr: ALRTCATDEF.
    2. After creating the Alert Category, you also have to assign users for your alert. Click the button Fixed Recipients and assign users.
    3. Log in to RWB and You should see your Alert Category in RWB. Subscribe to this Alert in the RWB and test your message.
    Thanks
    Prasad

  • Where can I find the Coherence log or alert message?

    Where can I find the Coherence log ands alert messages?
    e.g.
    partitioned cache-related log messages.
    configuration-related log messages.
    network-related messages.
    Thank you

    Hi,
    All messages by default are sent to stderr and can be configured either through specifying an tangosol-override file and setting appropriate options listed here: [http://wiki.tangosol.com/display/COH35UG/logging-config|http://wiki.tangosol.com/display/COH35UG/logging-config] or setting JVM args:
    tangosol.coherence.log
    tangosol.coherence.log.level
    ...or you can specify your own logger such as log4j or jul using tangosol.coherence.log.logger
    --harvey                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Alert Inbox and Alert Config does not open in RWB

    When I open RWB I am not able to open Alert Inbox and Alert Configuration links. Its says " Internet Explorer cannot display the webpage" . When I exequte the command ALRTINBOX from Abap stack, it opens the Alert Inbox page.
    Can someone tell me if there is any setting that I need to change in my Internet Explorer. I even tried using Mozilla, but same issue. My team members are able to open these links, hence it may be some setting on my machine.

    Hi Chiraj/ Navneet,
      Thanks for your reply, I have already tried these setting and my team members are able to login from their comps. Also i have tried using SUPER USER id which has all access, still the same issue. Hence I believe it is an issue with Internet Explorer setting.
    Thanks
    Vineet

  • Alert Configuration Transport

    Hi Everybody,
    I have configured alerts in Development system PI 7.0.
    Can we transport these Alerts to QA or we need to do re configuration for Alerts in different environments.
    Note : I am referrring to the configuration in ALRTCATDEF and Alert Configuration of RWB.
    Any documents or links of transport would be helpful.
    Thanks,
    Zabiulla

    http://help.sap.com/saphelp_nw04/helpdata/en/a6/5a94413aaad960e10000000a1550b0/frameset.htm

  • How to coonfigure CCMS Alerts and Alert Categories and Alert Rules

    How to Configure CCMS Alerts and Alert Categories and Alert Rules....plz give detail description related to these

    Hello Raja,
    Can save a lot of your valuable time by telling you only about the events/errors you have to take care of.Here all about the Alert monitoring.Below I am giving the weblogs which are beautifully described about CCMS and mail alerts.
    follow the weblogs one-by-one.
    I hope at the end of this you may get some knowledge on Alerts.
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step XI:Alerts step-by-step. (fundamental Basic)
    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i CCMS Monitoring for XI. (CCMS monitoring for XI is enough later
    we configure to Adapter Engine).
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 Configuring scenario specific E-mail alerts in XI-CCMS: Part-1
    (This is Important)
    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
    /people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies Solution Manager CEN and Alerting configuration (Advanced)
    Please reward points if it is useful...
    Thanks,
    Satya Kumar

  • Alert Configuration can not log on!!

    hi gurus:
    I click  Alert Configuration or Alert Inbox  in RWB, a window popup ask for user id and password,  user id and password of SAP NetWeaver Application Server [XID/000]u201D
    i input user name with SAP_ALL authotization, but can not logon,  if i cancel this logon, erro display like this:
      URL http://sapittest:50000/sap/bc/bsp/sap/sxms_alertrules/main.do error due to log on data
    i check SICF,alertinbox and sxms_alertrules is active,  use program RSXMB_ACTIVATE_ICF_SERVICES to check web service and all are active.
    i have checked Note 750287 - Runtime Workbench: Alert configuration does not start, the configuration in exchange profile is correct.
    what should i do, does anyone have good idea for this ?
      thank you very much
    Edited by: cheng1974 on Dec 3, 2010 4:04 AM

    URL http://sapittest:50000/sap/bc/bsp/sap/sxms_alertrules/main.do error due to log on data
    Maintain FQDN (fully qualified domain name) in exchange profile for your PI server.....it may look something like sapittest.abcompany.com ....take help from the basis/ admin team and then again try to login.
    Regards,
    Abhishek.

  • In r12 What is use of Purge log and Closed system alerts

    Hi
    In r12 What is use Concurrent reqest "Purge logs and Closed system alerts "
    is there any diffrence with "Purge Concurrent Request and/or Manager Data Program"
    we have to purge cm logs and data.
    '

    In r12 What is use Concurrent reqest "Purge logs and Closed system alerts "The concurrent program "Purge Debug Log and System Alerts" (Short name: FNDLGPRG) is the recommended way to purge messages. This program purges all messages up to the specified date, except messages for active transactions (new or open alerts, active ICX sessions, concurrent requests, and so on). This program is by default scheduled to run daily and purge messages older than 7 days. Internally this concurrent program invokes the FND_LOG_ADMIN APIs, which are described later in this document.
    Oracle® Applications Supportability Guide Release 12
    http://download.oracle.com/docs/cd/B40089_09/current/acrobat/120fndsupp.pdf
    is there any diffrence with "Purge Concurrent Request and/or Manager Data Program" This concurrent program is used to purge concurrent requests log/out file, and/or CM log files.
    we have to purge cm logs and data.Use "Purge Concurrent Request and/or Manager Data" concurrent program.

  • Removing alert logs and trace files

    Hi everyone!
    I noticed that in all the oracle databases, the trace files are piling and alert log is growing like anything ....
    Thought of making a copy of the trace files somewhere and remove them from the hard disk excluding the most recent ones.
    For alert log, thought of making a copy and renaming the current file so that Oracle can create a new one.
    Any advice if there are better approaches in handling this?
    Thanks in advance.

    user645399 wrote:
    Hi everyone!
    I noticed that in all the oracle databases, the trace files are piling and alert log is growing like anything ....
    Thought of making a copy of the trace files somewhere and remove them from the hard disk excluding the most recent ones.
    For alert log, thought of making a copy and renaming the current file so that Oracle can create a new one.
    Any advice if there are better approaches in handling this?
    Thanks in advance.I would include the alert log file in my backup strategy as it includes many important information; database parameter values,when and how the database was shut down, the important database errors and when they occur , etc ... I usually backup the alert log file once a month and keep 1 year of alert log file copies..

  • How to configure logs and trace files

    Hello people,
       We have just implemented ESS-MSS, we have around 25000 people using this service and every 2 days my logs and trace file in server gets full and portal gets down.
    Please suggest how to solve this problem,how can i reduce trace and log files,,,,,any configuration or setting is there to configure this...please suggest and explain how can it be done.
    Biren

    Hi,
    You can control what messages gets logged depending on the severity.
    This can be configured using Log Configurator, check this how you can set severity to different locations.
    Netweaver Portal Log Configuration & Viewing (Part 1)
    Regards,
    Praveen Gudapati

Maybe you are looking for

  • Scanning multiple pages to one document HP Deskjet 1050A J410 series

    I want to scan three pages to one PDF file and save to my computer.  The help already available on line says click the + button   There is no + button on the HP Deskjet 1050A scan screen on the computer.  Scanning single pages is easy.  I have been t

  • Goods Issue in CO27

    HI       I have given to a client CO27 - as they wanted goods issue for multiple production orders.        I have a problem in posting period.For 2 days some entries are pending in December month.Due to this we didnt open the period for january.Iam t

  • I want to move a channel

    I have returned from holiday to find that my BT Vision + box channels have all been altered by BT. My previous signals were from the Winter Hill transmitter, north west, but then altered to BBC Wales,(1) ITV Wales (3) and SC4 (Welsh language) (4) I h

  • Wishlist for Nokia 5800 V21+

    So you've seen that 5800 has it's new update V21.0.025 up and running and we can see some changes/Updates but not major ones.. What major updates would you love to see in you Nokia 5800's other upcoming Versions ? (minor ones aswell)  Nokia 3230, Nok

  • Message no. 06754

    Terms of payment specifying payment by installment not possible here Message no. 06754 Dear All The above is the warning message which poped up during PO creation can somebody throw some light on it. Regards Suresh