Long start-time and error-popup

Hello,
after a TS3.5 reinstallation it took very long to start up and after i while i got the attached screenshot.
What does TS have to do with agilent-licencing?
This popup only appeared once but TS still needs very long before i can log-in
Any ideas how to speed this up?
Thx
Attachments:
licence.JPG ‏115 KB

Hi!
The problem is not coming from TestStand 3.5 but from the your NI License Server.
The NI License Server on your PC is searching the license for TestStand from a Volume License Server in a server named "bitools.lvld.agilent.com"
Are you using the Volume License Server? Do you take the license for NI Software locally or on a server?
Check the NI License Server (Start ->Programs->National Instruments-> NI License Manager) and under "Options -> Settings" check the first checkbox.
In your case the "bitools.lvld.agilent.com" is probably checked. Set the right name for your license server (if you are using on) or uncheck the box if you are using local licenses.
Once this problem is resolved, the launch time of TS will speed up and no error will appear
Best regards
Ken

Similar Messages

Long upload time and errors at the end

I am editing an hour video and trim it down to 4 minutes and when I try to upload to facebook it takes over an hour and than at the very end it has an error code and fails to upload. I have tried several different videos. I am currently an AT&T customer using DSL on their Fast Access Direct Ultra plan, which equates to 1.5 Mbps. I cannot figure out why this is happening, any ideas or solutions would be greatly appreciated.

As a test, I would Export/Share/Publish the Project to a file, to be manually uploaded to YouTube. This FAQ Entry will give you some tips: http://forums.adobe.com/message/2759311#2759311
Does that work better?
Good luck,
Hunt

In SharePoint Calendar lists, fields [Start Time] and [End Time] do not exist at the Site Column level.

<header style="box-sizing:border-box;color:#777777;line-height:1;font-size:13px;padding-right:46px;margin-bottom:3px;font-family:'Helvetica Neue', arial, sans-serif;">
</header>
I'm doing SP app development and have the following problem.
I need to check Start time and End Time in SharePoint Calendar using CAML query and then add a new event to Calendar list using the Start time and End Time that user has entered in 2 datapickers
in the form.
function AddCalendarListItems() {
var SD = document.getElementById("datepicker1").value;
var SThh = document.getElementById("St1").value;
var STmm = document.getElementById("St2").value;
var ED = document.getElementById("datepicker2").value;
var EThh = document.getElementById("Et1").value;
var ETmm = document.getElementById("Et2").value;
var T = document.getElementById("Title").value;
var S1 = SThh;
SD = SD.slice(6, 10) + "-" + SD.slice(0, 2) + "-" + SD.slice(3, 5) + "T" + SThh + STmm + ":00Z";
ED = ED.slice(6, 10) + "-" + ED.slice(0, 2) + "-" + ED.slice(3, 5) + "T" + EThh + ETmm + ":00Z";
//alert("SD= " + SD + " , ED= " + ED);
var siteUrl = SiteCollurl + "/SharePointApp11";
var clientContext = new SP.ClientContext(siteUrl);
var oList = clientContext.get_web().get_lists().getByTitle('Calendar');
var ListItemCInfo = new SP.ListItemCreationInformation();
var newEvent = oList.addItem(ListItemCInfo);
newEvent.set_item("Title", T);
newEvent.set_item("EventDate", SD);
newEvent.set_item("EndDate", ED);
newEvent.update();
clientContext.executeQueryAsync(Function.createDelegate(this, this.onQueryAddCalendarSucceeded2), Function.createDelegate(this, this.onQueryAddCalendarFailed2));
function onQueryAddCalendarSucceeded2(sender, args) {
alert("Success");
function onQueryAddCalendarFailed2(sender, args) {
alert('Add new item to the calendar failed. ' + args.get_message() + '\n' + args.get_stackTrace());
But I receive the following error:
Add new item to the Calendar failed. Column 'Start time' does not exist. It may have been deleted by another user.
I've checked and 'Start time' does exist. So it seems in SharePoint Calendar lists, field [Start Time] and [End Time] exist but do not exist at the Site Column level.
Please advise.

Hi Khojasteh,
Use “EventDate” for Start Time field, and “EndDate” for End Time field. They are the internal name of the two fields, you can check it in the column settings page url like “Field=EndDate”.
If it isn’t the issue, please debug the code, in which line the error occurs.
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support

ESS Working Time - Start Time and End Time in Weekly View

Hello,
I'm having a problem with the business package ESS - functionality Working Time (cat2).
I need that information to Start Time and End Time appear in the Weekly View of the portal.
In Daily View that information are already visible, but In Weekly View that information does not appear.
Does anyone have any suggestions?
Thank you very much your attention.
Att,
Jair de Oliveira Junior

Hi Bala
You can have clock in and clock out in a weekly view.
you have to change the data entry profile settings.
In general settings tab in data entry profile click the with clock times button and maintain the Period type to 02 in time settings tab.
And you can view the weekly entry in clock in and clock out.
Ravee
+91.99206.33669

If I have manually set "Start Time" and "Stop Time" for songs, and my hard drive is backed up in Time Machine, when files/songs are transferred on new hard drive, will my "Start Time" "Stop Time" options be there?

My Macbook Pro will be going in for reimaging and my hard drive will be wiped, I want to know if all my iTunes preferences will be copied if I have backed them up on Time Machine. Specifically, if I have set certain "Start Time" and "Stop Time" for my songs, and I copy my iTunes library, will these "Start Time" and "Stop Time" options remain or will I have to manually set them one by one once again? I need a reply ASAP! Thanks so much!

As far as I'm aware the start & stop times are stored in the library database, not the media files. If you backup/restore/transfer the whole library then the settings are included. If you create a complete copy of your iTunes folder on another drive you can connect to that copy by holding down option/alt as you start iTunes so you can check that everything is working properly before you send the Macbook away.
tt2

Calculate End Time from a Start Time and Minutes Allocated

Hello,
I have a meeting form which needs to have the finish time calculated from a start time and allocated time (in minutes).
The allocated time is a text field with the default of "00:00". The user can then enter the number of minutes for the agenda item to take. eg 00:20 would be 20 minutes.
The start time is a date/time calculated field which shows the current time after the allocated time has been entered. The formcalc script is :
form1.ActionsHeaderFrame.ActionsStartTime.rawValue
= num2time(Time(), TimeFmt(1))
The Finish Time field is a calculated date/time field to add up the start time and allocated minutes.
The formcalc script is:
var Min1 = ActionsTime.rawValue
var Start1 = Time2Num(ActionsStartTime.formattedValue, "h:MM A")
form1.ActionsHeaderFrame.ActionsEndTime.rawValue = Min1 + Start1
The end time is showing as a number, and I need help in converting to a time.
An example is as follows:
If the text field for allocated time as 00:20 and the start time date field shows 4:23 PM the calculated End time field is showing 22980001.
Any advice or assistance with this script would be most appreciated.

Thank you very much for your assistance.
I have changed the allocated time field (ActionsTime) to a binding time field.
In the End Time Field (ActionsEndTime) I have changed the formcalc function as follows:
var Min1 = Time2Num(ActionsTime.formattedValue, "HH:MM")
var Start1 = Time2Num(ActionsStartTime.formattedValue, "h:MM A")
$ = Num2Time((Start1 + Min1), "H:MM A")
The result with user input:
Allocated time field input of 00:10 which is equal to (10 minutes)
Start time field 10:41 AM
End time Field result shows 23:51 PM
Can you please advise where the formula needs to be revised to show the correct end time?
Thank you

Function Module for Start time and End time

Hi Experts,
I need a function module for getting particular Work schedule rule start time and endtime and further details by passing personnel number and day.
Thanks in advance.
Sunil

FYI - https://forums.sdn.sap.com/click.jspa?searchID=-1&messageID=5338428
Thanks,
SK

Hide the start time and end time in ESS portal

Experts,
We have a requirement to hide the Start time and End time on the header section of the travel request / expense sheet in the ESS portal. I have searched through the configuration and found several place to hide the start time and end time of segment yet these have no impact on the porta start and end time fields.
Please Advise.
Best Regards,
Martin Weakley

Hi Martin,
you can achieve this with administrative personalisation. In portal content navigate to the role where you deltalinked your iView, click "preview". When a new Window for the preview is opened, notice the URL contains "&sap-config-mode=true". Now right click on the fields you want to hide and choose "enter configuration" (or the like, wording is not exact) from the context menue. The WD-UI-Element tree opens where you can directly hide/customize properties of the WD. When clicking save+exist you can also transport the alterations you did.
maybe this helps or gives you a helpful alternative to the already stated measures in this thread
regards, Lukas

How to get the start time and date

Hi everyone! I have a question ,who will be glad to help me! Thanks in advance!
As we know ,when we finish the UUT test ,it generate report . The report format maybe like"SeqFileName_Report[Time][Date]_00001.xml"
My question is"how can I get the [Time] and [Date] in the test sequence"

See this post.
How To Display Time Information in Report/Results?
http://forums.ni.com/t5/NI-TestStand/During-a-test-how-can-I-find-the-start-time-and-date-of-that/td...
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Start time and endtime of a procedure

Hi all,
I want to findout the start time and edn time of a procedure that was executed now.
How i can do this using oracle. Is there any table that will store this information??
or is there any aproach??
My exact requirement is
i am developing a shell script to execute the procedure.
at the end of the unix shell script i i will capture sql/plsql information in a .log file.
i will search for the start and end times from that .log file.
so i want to capture the start time and end time using oracle.
kindly reply soonn... very urgent
Thanks.

Hi,
There is a table called V$SYS_TIME_MODEL. You can use it as follows to find the time spent in executing a PL/SQL procedure.
SELECT VALUE FROM WHERE
STAT_NAME = 'PL/SQL execution elapsed time');
Execute the above query before and after execution of the pl/sql procedure. The difference should give you the time spent in the procedure.
Hope this helps,
Regards,
Sumit

SCOM Alert Connector - not updating the start time and finish time

When I am monitoring the status of connectors in service manager console, I found that for SCOM Alert Connector the Start Time and Finish Time are not updating. Previously it was updated daily. As of now, service manager is working fine but would like
to check will it create any issues? Even I have cliked on Synchronize Now, but there is no update. Please guide me on this to trouble shoot further? Thanks.

Hi,
Based on my research, the Start Time and Finish Time values are not updated when an alert connector is synchronized. These values are only updated when alert data is transferred between Operations Manager 2007 and Service
Manager.
More details, please refer to the link below:
http://technet.microsoft.com/en-us/library/hh495609.aspx
In addition, here is a blog about troubleshooting for SCSM and SCOM alert connector:
http://blogs.technet.com/b/servicemanager/archive/2010/04/14/troubleshooting-tips-for-your-scsm-scom-alert-connector.aspx
Regards,
Yan Li
Regards, Yan Li

Enter start time and end time of inspection

Dear all
Plz tell me where we can enter start time and end time of inspection.
Regards
Nirmala

Hi Nirmala,
I think Inspection start time is not required for any analysis or else. Days taken for closing lots are important than time. Any how, the stock posted or Inspection completed time is already available in Stock posting log - transaction QA33.
In transaction QA33,
1. Input Material, Plant & Period etc
2. Select a lot (UD made)
3. Select Usage decision tab
4. Select Stock posting tab
5. Select Stock posting log in the tab(header) - here your inspection completed (UD) time is getting stored
Further issue, pls reply.
VRMP.

How to know the process chain start time and end time

Hi Experts,
How to know the process chain start time and end time .
Thanks in advance
Regards
Gutti
Edited by: guttireddy on Feb 23, 2012 11:30 PM

Hi Reddy,
You may find the run time of a PC using below steps.
1. Call SE38 > /SSA/BWT > Execute > Enter your PC , choose the date and time > Execute. Here Run-time of a PC is displayed. (or)
2. Call RSPC1 > Enter your PC > Execute > Goto Log view > Right click on the start Variant > Displaying Messages > Note down the start time in Chain Tab. Now Right click on the last Process type of the PC > Displaying Messages > Note down the End time in Chain Tab. The Difference b/w start time and end time gives the Run-time of your PC.
Hope this helps.
Regards
Sai

Long loading times and jerky playback

Hello,
I work often with Adobe Premiere CS6 but got an annoying problem.
When I have a project with many clips in the sequence, than I got really long loading times and often the playback is jerky
Is there a function, which reduces the loading times and/or the jerky playback?
I already used "Remove Unused" and "Delete Render Files".
Is it helpful to split the clips to serveral sequences and put all clips together at the end?
My computer specifications:
CPU: AMD Phenom II X6 1055T (2,8 GHz Hexa-Core)
RAM: 8 GB Corsair XMS3 DDR3 1333 MHz (2 GB reserved for other applications)
HDD with Adobe Premiere CS6: Crucial RealSSD C300 CTFDDAC064MAG
HDD with videoclips: first Samsung Spinpoint F3 1TB (HD103SJ)
HDD with projects: second Samsung Spinpoint F3 1TB (HD103SJ)
Graphic: NVIDIA GeForce GTX 460
OS: Microsoft Windows 7 Home Premium (64-Bit)
Is there a bottleneck at my hardware?
Thanks a lot!
Tim

Is there a bottleneck at my hardware?
Yes. The CPU, memory and motherboard. See the Warning here: http://ppbm7.com/index.php/tweakers-page/85-raid-or-not-to-raid
Also read the other articles http://ppbm7.com/index.php/tweakers-page

SoA Couldnt start- Time Out Error

Hi,
My oracle SOA version is 10.1.3.1. I have created a application ( say sampleApplication) in jdeveloper (webservice from wsdl). When deploying the application to the application server it takes a long time to complete (approx 30 mins) but it gets deployed without error. I got a perm gen error and I stopped the SOA. When started it again after incresing the perm gen size, the SOA couldnt start. Got the following error
<ERROR> <collaxa> <ProcessJob::execute> Attempt (1/15) ... failed to connect ... retrying in 5 seconds ...
<2009-09-11 17:55:13,130> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://myURl....
Maximum attempt of 15 was reached and the SOA failed to restart.
After playing around with the server.xml (trying to remove all application entries and adding it one by one) found that when i removed the sampleApplication's entry from server.xml and tried starting SOA , it worked and it Started fine.
Can any one point what might be the problem in my case.?
Thanks in advance..
(P.S: The other application deployed are developed in the same way as that of sampleApplication. So couldnt see any thing wrong with the sampleApplication. Other application entries in server.xml do not create this problem.)
Edited by: user8655700 on Sep 11, 2009 7:03 AM

Hi James,
Thank You for your suggestion. I have some doubts.
1) You suggested to revert back to old parameter and restart jDEV. What is the parameter i need to revert? I have only changed the max,min and perm size in opmn.xml because I keep getting perm gen error quite often. Did you mean those parameters ?
2)Restarting jDev will solve the issue of longer deployment time for applications. But when I restart the SOA itself, it fails to start.I get the Time out error. On removing the application which took longer time to deploy from server.xml, SOA starts without error. No other changes have been made. So the question is why is the application which is successfully deployed from jdeveloper like many other applications stopping the SOA to start.?
3)Or is the load during SOA startup is high, which results in it failing to start? If so how can I overcome this issue.
Thanks,
Ananth
Edited by: user8655700 on Sep 14, 2009 10:25 PM

Long start-time and error-popup

Similar Messages

Maybe you are looking for