SoA Couldnt start- Time Out Error
Hi,
My oracle SOA version is 10.1.3.1. I have created a application ( say sampleApplication) in jdeveloper (webservice from wsdl). When deploying the application to the application server it takes a long time to complete (approx 30 mins) but it gets deployed without error. I got a perm gen error and I stopped the SOA. When started it again after incresing the perm gen size, the SOA couldnt start. Got the following error
<ERROR> <collaxa> <ProcessJob::execute> Attempt (1/15) ... failed to connect ... retrying in 5 seconds ...
<2009-09-11 17:55:13,130> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://myURl....
Maximum attempt of 15 was reached and the SOA failed to restart.
After playing around with the server.xml (trying to remove all application entries and adding it one by one) found that when i removed the sampleApplication's entry from server.xml and tried starting SOA , it worked and it Started fine.
Can any one point what might be the problem in my case.?
Thanks in advance..
(P.S: The other application deployed are developed in the same way as that of sampleApplication. So couldnt see any thing wrong with the sampleApplication. Other application entries in server.xml do not create this problem.)
Edited by: user8655700 on Sep 11, 2009 7:03 AM
Hi James,
Thank You for your suggestion. I have some doubts.
1) You suggested to revert back to old parameter and restart jDEV. What is the parameter i need to revert? I have only changed the max,min and perm size in opmn.xml because I keep getting perm gen error quite often. Did you mean those parameters ?
2)Restarting jDev will solve the issue of longer deployment time for applications. But when I restart the SOA itself, it fails to start.I get the Time out error. On removing the application which took longer time to deploy from server.xml, SOA starts without error. No other changes have been made. So the question is why is the application which is successfully deployed from jdeveloper like many other applications stopping the SOA to start.?
3)Or is the load during SOA startup is high, which results in it failing to start? If so how can I overcome this issue.
Thanks,
Ananth
Edited by: user8655700 on Sep 14, 2009 10:25 PM
Similar Messages
-
When pressing software Update it starts then gives a time out error
I have a small problem my quicksilver is connected to the internet via ethernet cable and can search the net no problems but when I press Software update it starts then 30 seconds says Time Out Error 101 check your internet connections it then gives you an option to check connection and says it is working fine.
The ethernet cable is connected to my sky router which have two other PCs connected to it.
The time out error 101 is the only problem I have on my Power Mac G4 quicksilver
Help would be very much appreciatedHi Moonkissed, and a warm welcome to the forums!
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, trash these files but don't empty the trash yet.
Library/Preferences/com.apple.SoftwareUpdate.plist
Library/Caches/com.apple.SoftwareUpdate
Users/YourUserName/Library/Preferences/ByHost/com.apple.SoftwareUpdate.(12 digit number).plist
Users/YourUserName/Library/Caches/com.apple.SoftwareUpdate
Users/YourUserName/Library/Preferences/com.apple.SoftwareUpdate.plist
Reboot & try it again. -
Time out error 1.6 million internal table fields are computed using FMs
Hi , All ...
The Report running fine in server with less 300 record but ...production server which has 1.6 million record it gives error as time-out error and takes hell amount of time.
Please suggest ugently ..
I have tried few things
Internal table having 1.6 lacs ... fields to compute .. i have token in a batch
loop at i_cinfo into s_cinfo from 1 to 100000.
and so on ...also applied all the performace related .. like indexs, work areas , deleting adjacent duplicates , for all entries ..wherever applicable.
Please Suggest .
Report is as below
REPORT ZUSOTCBD_CREDIT_REPORT .
TABLES : KNA1, " General Data Customer Master
KNB1, " Customer Master (Company Code)
KNC1, " Customer master (transaction figures)
KNKK, " Customer master credit management: Control area data
T009, " Fiscal Year Variants P
T009Y, " Shortened fiscal years in Asset Accounting P
T001, " Co. Codes
T001CM, " Permitted Credit Control Areas per Company Code
RF42B, " Structure to hold credit data.
RF035, " Structure to hold credit managment fields
RF02L, " Structure to hold credit data.
TRAS, " Interval for Days in Arrears P
T000CM. " Data for DSO calculation.
Types
TYPES:
BEGIN OF type_final,
string(50) TYPE c, " String Value for Title
END OF type_final.
data:wa_final TYPE type_final. " Work Area to hold Title Data
DATA: RASID TYPE RF035-RASID value 'R03N'. " For Days in interval
DATA: MONAT(2) TYPE N.
DATA: GJAHR TYPE KNC1-GJAHR.
DATA: LD_PERIODS(32) TYPE N
VALUE '01020304050607080910111213141516'.
DATA sytabix type sy-tabix.
DATA LAND TYPE KNA1-LAND1 VALUE 'US'. " Country Key
DATA: LD_PERIOD TYPE BSID-MONAT, " Fiscal Year Variant
LD_GJAHR TYPE KNC1-GJAHR,
LD_COUNTER TYPE SY-TABIX.
Internal Tables
Internal table to hold Title Data *
DATA:
i_final TYPE STANDARD TABLE OF type_final.
**Internal Table Permitted Credit Control Areas per Company Code
DATA: BEGIN OF TCMTAB OCCURS 10.
INCLUDE STRUCTURE T001CM.
DATA: END OF TCMTAB.
*Internal table to store Customer no.
DATA : BEGIN OF ICUST OCCURS 0,
KUNNR TYPE KNA1-KUNNR, " Customer No.
END OF ICUST.
DATA: BEGIN OF BUKTAB OCCURS 20,
KKBER LIKE T001-KKBER, " Credit Control Area
BUKRS LIKE T001-BUKRS, " Co. Code
WAERS LIKE T001-WAERS, " Currency
PERIV LIKE T001-PERIV, " Fiscal Year Variant
BUTXT LIKE T001-BUTXT,
END OF BUKTAB.
Internal Table to store Fiscal year Data .
DATA: BEGIN OF GJATAB OCCURS 5,
PERIV LIKE T001-PERIV, " Fiscal Year Variant
GJAHR LIKE KNC1-GJAHR, " Fiscal Year
MONAT LIKE T009-ANZBP, "
ANZBP LIKE T009-ANZBP, " Number of posting periods
END OF GJATAB.
*Main Output internal table to be used to store credit history Information
DATA : BEGIN OF I_CINFO occurs 0,
KUNNR TYPE KNB1-KUNNR, " Customer
KNKLI TYPE KNKK-KNKLI, " Customer's account number with credit limit reference
KKBER TYPE KNKK-KKBER, " Credit Control Area
CTLPC TYPE KNKK-CTLPC, " Risk Category
KLIMK TYPE KNKK-KLIMK, " Credit Limit
SBGRP TYPE KNKK-SBGRP, " Credit representative group for credit management
ERDAT TYPE KNKK-ERDAT, " Created On
DTREV TYPE KNKK-DTREV, " Last Internal Review
REVDB TYPE KNKK-REVDB, " Last External Review
SALDO TYPE RF42B-SALDO, " Balance
DSOIN TYPE RF02L-DSOIN, " DSO
H06SA TYPE RF035-H06SA, " Highest Balance at the end of 6 Months
H06JA TYPE RF035-H06JA, " Year highest Balance 6 Months
H06MO TYPE RF035-H06MO, " Month OF hihest Balance 6 Months
H12SA TYPE RF035-H12SA, " Highest Balance at the end of 12 Months
H12JA TYPE RF035-H12JA, " Year highest Balance 12 Months
H12MO TYPE RF035-H12MO, " Month OF hihest Balance 12 Months
UMP2U TYPE RF42B-UMP2U, " Sales from the current Year
UMP1U TYPE RF42B-UMP1U, " Sales from the Previous Year
SFAEL TYPE RF035-SFAEL, " Total Past Due Open Item
SFAE1 TYPE RF035-SFAE1, " Aging buckets 0-15
SFAE2 TYPE RF035-SFAE2, " Aging buckets 16-30
SFAE3 TYPE RF035-SFAE3, " Aging buckets 31-60
SFAE4 TYPE RF035-SFAE4, " Aging buckets 60-90
SFAE5 TYPE RF035-SFAE5, " Aging buckets Over 90
END Of I_CINFO.
DATA : BEGIN OF S_CINFO ,
KUNNR TYPE KNB1-KUNNR, " Customer
KNKLI TYPE KNKK-KNKLI, " Customer's account number with credit limit reference
KKBER TYPE KNKK-KKBER, " Credit Control Area
CTLPC TYPE KNKK-CTLPC, " Risk Category
KLIMK TYPE KNKK-KLIMK, " Credit Limit
SBGRP TYPE KNKK-SBGRP, " Credit representative group for credit management
ERDAT TYPE KNKK-ERDAT, " Created On
DTREV TYPE KNKK-DTREV, " Last Internal Review
REVDB TYPE KNKK-REVDB, " Last External Review
SALDO TYPE RF42B-SALDO, " Balance
DSOIN TYPE RF02L-DSOIN, " DSO
H06SA TYPE RF035-H06SA, " Highest Balance at the end of 6 Months
H06JA TYPE RF035-H06JA, " Year highest Balance 6 Months
H06MO TYPE RF035-H06MO, " Month OF hihest Balance 6 Months
H12SA TYPE RF035-H12SA, " Highest Balance at the end of 12 Months
H12JA TYPE RF035-H12JA, " Year highest Balance 12 Months
H12MO TYPE RF035-H12MO, " Month OF hihest Balance 12 Months
UMP2U TYPE RF42B-UMP2U, " Sales from the current Year
UMP1U TYPE RF42B-UMP1U, " Sales from the Previous Year
SFAEL TYPE RF035-SFAEL, " Total Past Due Open Item
SFAE1 TYPE RF035-SFAE1, " Aging buckets 0-15
SFAE2 TYPE RF035-SFAE2, " Aging buckets 16-30
SFAE3 TYPE RF035-SFAE3, " Aging buckets 31-60
SFAE4 TYPE RF035-SFAE4, " Aging buckets 60-90
SFAE5 TYPE RF035-SFAE5, " Aging buckets Over 90
END Of s_cinfo.
*Internal table to hold month-wise balance.
DATA: BEGIN OF SALTAB OCCURS 12,
LNUMM(2) TYPE N, " Month
SALDO LIKE RF42B-SALDO, " Balance
END OF SALTAB.
*Internal table used for computing the Balance fields
DATA: BEGIN OF SALDO,
UML01 LIKE KNC1-UM01S,
UML02 LIKE KNC1-UM01S,
UML03 LIKE KNC1-UM01S,
UML04 LIKE KNC1-UM01S,
UML05 LIKE KNC1-UM01S,
UML06 LIKE KNC1-UM01S,
UML07 LIKE KNC1-UM01S,
UML08 LIKE KNC1-UM01S,
UML09 LIKE KNC1-UM01S,
UML10 LIKE KNC1-UM01S,
UML11 LIKE KNC1-UM01S,
UML12 LIKE KNC1-UM01S,
END OF SALDO.
Structure to hold Bal fields ------ -------
DATA: BEGIN OF SKNKK,
KUNNR LIKE KNA1-KUNNR, " Customer Number 1: Debitor
KONTO LIKE KNKK-KUNNR,
SFAE1 LIKE RF035-SFAE1, " Aging buckets 0-15
SFAE2 LIKE RF035-SFAE2, " Aging buckets 16-30
SFAE3 LIKE RF035-SFAE3, " Aging buckets 30-60
SFAE4 LIKE RF035-SFAE4, " Aging buckets 60-90
SFAE5 LIKE RF035-SFAE5, " Aging buckets Over 90
SFAEL LIKE RF035-SFAEL, " Total Due of Items
UML01 LIKE KNC1-UM01S,
UML02 LIKE KNC1-UM01S,
UML03 LIKE KNC1-UM01S,
UML04 LIKE KNC1-UM01S,
UML05 LIKE KNC1-UM01S,
UML06 LIKE KNC1-UM01S,
UML07 LIKE KNC1-UM01S,
UML08 LIKE KNC1-UM01S,
UML09 LIKE KNC1-UM01S,
UML10 LIKE KNC1-UM01S,
UML11 LIKE KNC1-UM01S,
UML12 LIKE KNC1-UM01S,
UMP1U LIKE RF42B-UMP1U, " Sales from the Previous Year
UMP2U LIKE RF42B-UMP2U, " Sales from the current Year
SALDO LIKE RF42B-SALDO, " Balance
END OF SKNKK.
DATA : BEGIN OF ICUST1 OCCURS 0,
KUNNR TYPE KNA1-KUNNR, "For Customer Filter.
END OF ICUST1.
**Internal table to hold fiscal varriants
DATA: BEGIN OF LT_PERIODS OCCURS 12,
PERIOD LIKE BSID-MONAT,
GJAHR LIKE KNC1-GJAHR,
END OF LT_PERIODS.
**Constants
constants : BUKRS1 TYPE KNB1-BUKRS VALUE '1000',
BUKRS2 TYPE KNB1-BUKRS VALUE '1031',
Recs Type i value '200',
B_count type i value '2'.
INITIALIZATION
INITIALIZATION.
IF RASID IS INITIAL.
SELECT * FROM TRAS.
EXIT.
ENDSELECT.
IF SY-SUBRC = 0.
RASID = TRAS-RASID.
ENDIF.
ENDIF.
SELECTION-SCREEN
parameters : p_path type rlgrap-filename default 'C:\Documents and Settings\C890971\Desktop\Credit_history.XLS'.
Start of selection processing
START-OF-SELECTION.
**Get Customers for Co. Code 1000 & 1031.
PERFORM GET_CUST.
Get / Compute Credit Information data for Company Codes 1000 & 1031.
PERFORM GET_CREDIT_DATA.
End of selection processing
*END-OF-SELECTION.
Listing Credit History Data
PERFORM DOWNLOAD_CREDIT_DATA.
S U B R O U T I N E S
*& Form GET_CUST
text
--> p1 text
<-- p2 text
FORM GET_CUST .
Get US only Customers.
Refresh icust.
Select kunnr from kna1 appending table icust
where Land1 = land.
**Delete duplicate records
Delete Adjacent duplicates from icust comparing kunnr.
if icust[] is not initial.
Limit the selection some more to Co. Code 1000 & 1031
As join will cost overhead as compared.
Select kunnr from knb1 into table icust1
for all entries in icust
where kunnr = icust-kunnr
and bukrs = bukrs1
OR bukrs = bukrs2.
**Delete duplicate records
Delete Adjacent duplicates from icust1 comparing kunnr.
endif.
**Free memory.
Free icust.
Credit Control Area
select * from T001CM into table TCMTAB
where bukrs = bukrs1 OR
bukrs = bukrs2.
ENDFORM. " GET_CUST
*& Form GET_CREDIT_DATA
text
--> p1 text
<-- p2 text
FORM GET_CREDIT_DATA .
DATA : L_TEXT(60) TYPE C ,
Ltext1(50) type C value 'Computing Credit-History Data For',
Ltext2(10) type C value 'Customers',
L_PCT type i value '10',
L_recs type i,
l_batch_recs type i,
l_s_rec type i value 1,
l_recs1(7) type N.
***Fetch data from KNKK table
PERFORM GET_KNKK_DATA .
***Computing Crredit Fields
**Number of Customers For whom Deatils needed.
Describe table I_CINFO lines l_recs.
l_recs1 = l_recs.
Concatenate Ltext1 l_recs1 Ltext2 into l_text separated by ' '.
PERFORM GET_PGRESS_INDICATOR USING l_text l_pct.
***If records are more than 200000, should be processed batch-wise
If l_recs > recs.
l_batch_recs = abs( l_recs / b_count ).
Do b_count times.
loop at i_cinfo INTO S_CINFO from l_S_REC to l_batch_recs.
**Remember the row
sytabix = sy-tabix.
**Compute DSO
PERFORM GET_DSO_FIELD .
Compute rest credit history data.
PERFORM COMPUTE_SFIELDS.
endloop.
l_S_REC = l_S_REC + l_batch_recs.
l_batch_recs = l_batch_recs + l_batch_recs.
IF l_batch_recs ge l_recs.
l_batch_recs = l_recs.
eNDIF.
Commit up to here to release the DB locks.
Commit work.
enddo.
else.
loop at i_cinfo INTO S_CINFO.
**Remember the row
sytabix = sy-tabix.
**Compute DSO
PERFORM GET_DSO_FIELD .
Compute rest credit history data.
PERFORM COMPUTE_SFIELDS.
endloop.
Endif.
ENDFORM. " GET_CREDIT_DATA
*& Form GET_KNKK_DATA
text
-->P_ICUST_KUNNR text
FORM GET_KNKK_DATA .
if icust1[] is not initial.
SELECT KUNNR KNKLI KKBER CTLPC KLIMK
SBGRP ERDAT DTREV REVDB
from KNKK into corresponding fields of table I_Cinfo
for all entries in icust1
where kunnr = icust1-kunnr.
Delete Adjacent duplicates from i_cinfo comparing kunnr.
endif.
**Free Memory for internal table icust1.
Free icust1.
ENDFORM. " GET_KNKK_DATA
**& Form GET_DSO_FIELD
text
--> p1 text
<-- p2 text
FORM GET_DSO_FIELD .
***Determine DSO Parameter
PERFORM DSO_PARAMETER.
***Compute DSO
CALL FUNCTION 'CUSTOMER_DSO_CALCULATION'
EXPORTING
I_KKBER = s_cinfo-kkber
I_KUNNR = s_cinfo-kunnr
I_ANZBUPER = T000CM-DSOPP
I_XCHILDS = T000CM-DSOCH
I_ACTBALANCE = T000CM-DSOAB
IMPORTING
E_DSOIN = RF02L-DSOIN
EXCEPTIONS
ERROR_MESSAGE = 1.
ENDFORM. " GET_DSO_FIELD
*& Form DSO_PARAMETER
text
--> p1 text
<-- p2 text
FORM DSO_PARAMETER.
IF T000CM-DSOPP IS INITIAL.
SELECT SINGLE * FROM T000CM.
IF SY-SUBRC EQ 0.
IF T000CM-DSOPP IS INITIAL.
T000CM-DSOPP = '003'.
ENDIF.
ELSE.
T000CM-DSOPP = '003'.
T000CM-DSOCH = ' '.
T000CM-DSOAB = 'X'.
ENDIF.
ENDIF.
ENDFORM. " DSO_PARAMETER
--> p1 text
<-- p2 text
FORM PERIODE_ERMITTELN_EXC USING
P03_BUDAT LIKE SYST-DATUM
P03_GJAHR LIKE KNC1-GJAHR
P03_MONAT LIKE MONAT.
CALL FUNCTION 'FI_PERIOD_DETERMINE'
EXPORTING
I_BUDAT = P03_BUDAT
I_PERIV = T001-PERIV
I_BUKRS = T001-BUKRS
I_GJAHR = P03_GJAHR
I_MONAT = P03_MONAT
IMPORTING
E_GJAHR = P03_GJAHR
E_MONAT = P03_MONAT
EXCEPTIONS
ERROR_MESSAGE = 1.
ENDFORM. "PERIODE_ERMITTELN_EXC
*& Form COMPUTE_SFIELDS
text
--> p1 text
<-- p2 text
FORM COMPUTE_SFIELDS .
**Compute Balance
PERFORM GET_SFIELDS .
S_CINFO-DSOIN = RF02L-DSOIN.
S_CINFO-SALDO = RF035-SALDO.
S_CINFO-H06SA = RF035-H06SA.
S_CINFO-H06JA = RF035-H06JA.
S_CINFO-H06MO = RF035-H06MO.
S_CINFO-H12SA = RF035-H12SA.
S_CINFO-H12JA = RF035-H12JA.
S_CINFO-H12MO = RF035-H12MO.
S_CINFO-UMP2U = RF42B-UMP2U.
S_CINFO-UMP1U = RF42B-UMP1U.
S_CINFO-SFAEL = RF035-SFAEL.
S_CINFO-SFAE1 = RF035-SFAE1.
S_CINFO-SFAE2 = RF035-SFAE2.
S_CINFO-SFAE3 = RF035-SFAE3.
S_CINFO-SFAE4 = RF035-SFAE4.
S_CINFO-SFAE5 = RF035-SFAE5.
modify..
MODIFY I_CINFO FROM S_CINFO INDEX sytabix.
CLEAR: S_CINFO,RF035,RF02L, RF42B.
ENDFORM. " COMPUTE_SFIELDS
text
-->P_C_INFO_KUNNR text
FORM GET_CUST_BAL_INFO.
LOOP AT TCMTAB.
CALL FUNCTION 'FI_COMPANY_CODE_DATA'
EXPORTING
I_BUKRS = TCMTAB-BUKRS
IMPORTING
E_T001 = T001
EXCEPTIONS
ERROR_MESSAGE = 1.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING T001 TO BUKTAB.
BUKTAB-KKBER = TCMTAB-KKBER.
COLLECT BUKTAB.
ENDIF.
ENDLOOP.
LOOP AT BUKTAB WHERE PERIV NE SPACE.
GJATAB-PERIV = BUKTAB-PERIV.
COLLECT GJATAB.
ENDLOOP.
CLEAR: MONAT.
LOOP AT GJATAB.
T001-PERIV = GJATAB-PERIV.
CLEAR: GJAHR, MONAT.
PERFORM PERIODE_ERMITTELN_EXC USING SY-DATLO GJAHR MONAT.
CHECK SY-SUBRC = 0.
GJATAB-GJAHR = GJAHR.
GJATAB-MONAT = MONAT.
SELECT SINGLE * FROM T009 WHERE PERIV = GJATAB-PERIV.
IF SY-SUBRC = 0.
GJATAB-ANZBP = T009-ANZBP.
ENDIF.
MODIFY GJATAB.
ENDLOOP.
LOOP AT BUKTAB.
CHECK NOT ( BUKTAB-PERIV IS INITIAL ).
READ TABLE GJATAB WITH KEY BUKTAB-PERIV.
CHECK SY-SUBRC = 0
AND NOT ( GJATAB-GJAHR IS INITIAL ).
CALL FUNCTION 'CUSTOMER_BALANCE'
EXPORTING
KUNNR = S_cinfo-kunnr
BUKRS = BUKTAB-BUKRS
GJAHR = GJATAB-GJAHR
MONAT = GJATAB-MONAT
PERIV = GJATAB-PERIV
ANZBP = GJATAB-ANZBP
XH6MON = 'X'
XH12MON = 'X'
IMPORTING
UMP2U = RF42B-UMP2U
VMP2U = RF42B-UMP1U
SALDO = RF035-SALDO
UML01 = SALDO-UML01
UML02 = SALDO-UML02
UML03 = SALDO-UML03
UML04 = SALDO-UML04
UML05 = SALDO-UML05
UML06 = SALDO-UML06
UML07 = SALDO-UML07
UML08 = SALDO-UML08
UML09 = SALDO-UML09
UML10 = SALDO-UML10
UML11 = SALDO-UML11
UML12 = SALDO-UML12
EXCEPTIONS
NO_BALANCE = 4.
IF SY-SUBRC = 0.
SKNKK-UMP1U = SKNKK-UMP1U + RF42B-UMP1U.
SKNKK-UMP2U = SKNKK-UMP2U + RF42B-UMP2U.
SKNKK-SALDO = SKNKK-SALDO + RF035-SALDO.
SKNKK-UML01 = SKNKK-UML01 + SALDO-UML01.
SKNKK-UML02 = SKNKK-UML02 + SALDO-UML02.
SKNKK-UML03 = SKNKK-UML03 + SALDO-UML03.
SKNKK-UML04 = SKNKK-UML04 + SALDO-UML04.
SKNKK-UML05 = SKNKK-UML05 + SALDO-UML05.
SKNKK-UML06 = SKNKK-UML06 + SALDO-UML06.
SKNKK-UML07 = SKNKK-UML07 + SALDO-UML07.
SKNKK-UML08 = SKNKK-UML08 + SALDO-UML08.
SKNKK-UML09 = SKNKK-UML09 + SALDO-UML09.
SKNKK-UML10 = SKNKK-UML10 + SALDO-UML10.
SKNKK-UML11 = SKNKK-UML11 + SALDO-UML11.
SKNKK-UML12 = SKNKK-UML12 + SALDO-UML12.
ENDIF.
ENDLOOP.
ENDFORM. "
*& Form GET_SFIELDS
text
--> p1 text
<-- p2 text
FORM GET_SFIELDS .
sknkk-kunnr = S_CINFO-KUNNR.
**Clear target to store computed values
CLEAR: RF035.
**Compute Balance fields
PERFORM GET_CUST_BAL_INFO.
REFRESH: SALTAB.
SALTAB-LNUMM = '01'. SALTAB-SALDO = SKNKK-UML01. APPEND SALTAB.
SALTAB-LNUMM = '02'. SALTAB-SALDO = SKNKK-UML02. APPEND SALTAB.
SALTAB-LNUMM = '03'. SALTAB-SALDO = SKNKK-UML03. APPEND SALTAB.
SALTAB-LNUMM = '04'. SALTAB-SALDO = SKNKK-UML04. APPEND SALTAB.
SALTAB-LNUMM = '05'. SALTAB-SALDO = SKNKK-UML05. APPEND SALTAB.
SALTAB-LNUMM = '06'. SALTAB-SALDO = SKNKK-UML06. APPEND SALTAB.
SALTAB-LNUMM = '07'. SALTAB-SALDO = SKNKK-UML07. APPEND SALTAB.
SALTAB-LNUMM = '08'. SALTAB-SALDO = SKNKK-UML08. APPEND SALTAB.
SALTAB-LNUMM = '09'. SALTAB-SALDO = SKNKK-UML09. APPEND SALTAB.
SALTAB-LNUMM = '10'. SALTAB-SALDO = SKNKK-UML10. APPEND SALTAB.
SALTAB-LNUMM = '11'. SALTAB-SALDO = SKNKK-UML11. APPEND SALTAB.
SALTAB-LNUMM = '12'. SALTAB-SALDO = SKNKK-UML12. APPEND SALTAB.
READ TABLE SALTAB INDEX 1.
RF035-H06SA = SALTAB-SALDO.
RF035-H06MO = SALTAB-LNUMM.
RF035-H12SA = SALTAB-SALDO.
RF035-H12MO = SALTAB-LNUMM.
------ SALTAB ---------------------------------------------
LOOP AT SALTAB.
IF SALTAB-SALDO > RF035-H06SA
AND SY-TABIX < 7.
RF035-H06SA = SALTAB-SALDO.
RF035-H06MO = SALTAB-LNUMM.
ENDIF.
IF SALTAB-SALDO > RF035-H12SA
AND SY-TABIX < 13.
RF035-H12SA = SALTAB-SALDO.
RF035-H12MO = SALTAB-LNUMM.
ENDIF.
ENDLOOP.
------ Period--------------------
REFRESH LT_PERIODS.
CLEAR LD_COUNTER.
READ TABLE BUKTAB INDEX 1.
IF SY-SUBRC = 0.
READ TABLE GJATAB WITH KEY BUKTAB-PERIV.
DO GJATAB-MONAT TIMES
VARYING LD_PERIOD FROM LD_PERIODS(2) NEXT LD_PERIODS+2(2)
RANGE LD_PERIODS.
LT_PERIODS-GJAHR = GJATAB-GJAHR.
LT_PERIODS-PERIOD = LD_PERIOD.
LD_COUNTER = LD_COUNTER + 1.
APPEND LT_PERIODS.
ENDDO.
IF LD_COUNTER LT 12.
LD_GJAHR = GJATAB-GJAHR - 1.
CLEAR T009Y.
SELECT SINGLE * FROM T009Y WHERE PERIV = GJATAB-PERIV
AND GJAHR = LD_GJAHR.
DO GJATAB-ANZBP TIMES
VARYING LD_PERIOD FROM LD_PERIODS(2) NEXT LD_PERIODS+2(2)
RANGE LD_PERIODS.
IF T009Y-ANZBP > 0.
CHECK SY-INDEX <= T009Y-ANZBP.
ENDIF.
LD_COUNTER = LD_COUNTER + 1.
LT_PERIODS-GJAHR = LD_GJAHR.
LT_PERIODS-PERIOD = LD_PERIOD.
APPEND LT_PERIODS.
ENDDO.
ENDIF.
IF LD_COUNTER LT 12.
LD_GJAHR = LD_GJAHR - 1.
DO GJATAB-ANZBP TIMES
VARYING LD_PERIOD FROM LD_PERIODS(2) NEXT LD_PERIODS+2(2)
RANGE LD_PERIODS.
LD_COUNTER = LD_COUNTER + 1.
LT_PERIODS-GJAHR = LD_GJAHR.
LT_PERIODS-PERIOD = LD_PERIOD.
APPEND LT_PERIODS.
ENDDO.
ENDIF.
SORT LT_PERIODS BY GJAHR ASCENDING PERIOD ASCENDING.
LD_COUNTER = LD_COUNTER - 12.
DO LD_COUNTER TIMES.
DELETE LT_PERIODS INDEX 1.
ENDDO.
SORT LT_PERIODS BY GJAHR DESCENDING PERIOD DESCENDING.
READ TABLE LT_PERIODS INDEX RF035-H06MO.
RF035-H06MO = LT_PERIODS-PERIOD.
RF035-H06JA = LT_PERIODS-GJAHR.
READ TABLE LT_PERIODS INDEX RF035-H12MO.
RF035-H12MO = LT_PERIODS-PERIOD.
RF035-H12JA = LT_PERIODS-GJAHR.
ENDIF.
**Compute Due Dates fields
PERFORM GET_AGING_BUCKETS .
RF035-SFAE1 = SKNKK-SFAE1.
RF035-SFAE2 = SKNKK-SFAE2.
RF035-SFAE3 = SKNKK-SFAE3.
RF035-SFAE4 = SKNKK-SFAE4 .
RF035-SFAE5 = SKNKK-SFAE5.
ENDLOOP.
ENDFORM. " GET_BALANCE_SFIELDS
*& Form GET_AGING_BUCKETS
text
--> p1 text
<-- p2 text
FORM GET_AGING_BUCKETS .
DATA: BEGIN OF LT_BUKRS OCCURS 0,
BUKRS LIKE T001-BUKRS,
END OF LT_BUKRS.
DATA: BEGIN OF LT_BUKTAB OCCURS 0,
BUKRS LIKE T001-BUKRS,
WAERS LIKE T001-WAERS,
KKBER LIKE T014-KKBER,
END OF LT_BUKTAB.
DATA: LD_LINES LIKE SY-TABIX.
*...performance optimization: for more than one company codes check....*
*...if balances exist and avoid selection of open items, if they don't.*
*...exist..............................................................*
REFRESH LT_BUKRS.
REFRESH LT_BUKTAB.
DESCRIBE TABLE BUKTAB LINES LD_LINES.
IF LD_LINES GT 1.
SELECT DISTINCT BUKRS APPENDING CORRESPONDING FIELDS
OF TABLE LT_BUKRS
FROM KNC1 FOR ALL ENTRIES IN BUKTAB
WHERE BUKRS = BUKTAB-BUKRS AND
KUNNR = Sknkk-KUNNR.
SELECT DISTINCT BUKRS APPENDING CORRESPONDING FIELDS
OF TABLE LT_BUKRS
FROM KNC3 FOR ALL ENTRIES IN BUKTAB
WHERE BUKRS = BUKTAB-BUKRS AND
KUNNR = Sknkk-KUNNR.
SORT LT_BUKRS.
DELETE ADJACENT DUPLICATES FROM LT_BUKRS.
LOOP AT LT_BUKRS.
LOOP AT BUKTAB WHERE BUKRS = LT_BUKRS-BUKRS.
MOVE-CORRESPONDING BUKTAB TO LT_BUKTAB.
APPEND LT_BUKTAB.
ENDLOOP.
ENDLOOP.
ELSE.
READ TABLE BUKTAB INDEX 1.
MOVE-CORRESPONDING BUKTAB TO LT_BUKTAB.
APPEND LT_BUKTAB.
ENDIF.
*...process company codes for customer given by interface..........*
LOOP AT LT_BUKTAB WHERE KKBER = s_cinfo-KKBER.
CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'
EXPORTING BUKRS = LT_BUKTAB-BUKRS
KKBER = ' '
KKBER = s_cinfo-KKBER
KUNNR = Sknkk-KUNNR
RASID = RASID
IMPORTING SFAE1 = RF035-SFAE1
SFAE2 = RF035-SFAE2
SFAE3 = RF035-SFAE3
SFAE4 = RF035-SFAE4
SFAE5 = RF035-SFAE5
SFAEL = RF035-SFAEL
EXCEPTIONS NO_OPEN_ITEMS = 4.
IF SY-SUBRC = 0.
*-- RF035 -
SKNKK-SFAE1 = SKNKK-SFAE1 + RF035-SFAE1.
SKNKK-SFAE2 = SKNKK-SFAE2 + RF035-SFAE2.
SKNKK-SFAE3 = SKNKK-SFAE3 + RF035-SFAE3.
SKNKK-SFAE4 = SKNKK-SFAE4 + RF035-SFAE4.
SKNKK-SFAE5 = SKNKK-SFAE5 + RF035-SFAE5.
SKNKK-SFAE5 = SKNKK-SFAE5 + RF035-SFAE5.
SKNKK-SFAEL = SKNKK-SFAEL + RF035-SFAEL.
ENDIF.
ENDLOOP.
ENDFORM. " GET_AGING_BUCKETS
*& Form header
This Subroutine gets data for displaying title *
There are no interface parameters to be passed to this subroutine. *
FORM header .
wa_final-string = text-000. APPEND wa_final TO i_final.
wa_final-string = text-001. APPEND wa_final TO i_final.
wa_final-string = text-002. APPEND wa_final TO i_final.
wa_final-string = text-003. APPEND wa_final TO i_final.
wa_final-string = text-004. APPEND wa_final TO i_final.
wa_final-string = text-005. APPEND wa_final TO i_final.
wa_final-string = text-006. APPEND wa_final TO i_final.
wa_final-string = text-007. APPEND wa_final TO i_final.
wa_final-string = text-008. APPEND wa_final TO i_final.
wa_final-string = text-009. APPEND wa_final TO i_final.
wa_final-string = text-010. APPEND wa_final TO i_final.
wa_final-string = text-011. APPEND wa_final TO i_final.
wa_final-string = text-012. APPEND wa_final TO i_final.
wa_final-string = text-013. APPEND wa_final TO i_final.
wa_final-string = text-014. APPEND wa_final TO i_final.
wa_final-string = text-015. APPEND wa_final TO i_final.
wa_final-string = text-016. APPEND wa_final TO i_final.
wa_final-string = text-017. APPEND wa_final TO i_final.
wa_final-string = text-018. APPEND wa_final TO i_final.
wa_final-string = text-019. APPEND wa_final TO i_final.
wa_final-string = text-020. APPEND wa_final TO i_final.
wa_final-string = text-021. APPEND wa_final TO i_final.
wa_final-string = text-022. APPEND wa_final TO i_final.
wa_final-string = text-023. APPEND wa_final TO i_final.
wa_final-string = text-024. APPEND wa_final TO i_final.
ENDFORM. " header
*& Form DOWNLOADCREDITDATA
text
-->P_P_PATH text
FORM DOWNLOADCREDITDATA USING P_PATH.
DATA:
lw_file2 TYPE string . " File Path
lw_file2 = p_PATH.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = BIN_FILESIZE
filename = lw_file2
filetype = 'DBF'
APPEND = ' '
write_field_separator = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = 'X'
WRITE_LF = 'X'
COL_SELECT = 'X'
COL_SELECT_MASK = ' '
DAT_MODE = 'X'
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = '0'
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH = FILELENGTH
TABLES
data_tab = I_CINFO
fieldnames = i_final
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
IF sy-subrc <> 0.
Messege
ENDIF. " IF sy-subrc EQ 0
ENDFORM. " DOWNLOADCREDITDATA
*& Form DOWNLOAD_CREDIT_DATA
text
--> p1 text
<-- p2 text
FORM DOWNLOAD_CREDIT_DATA .
PERFORM HEADER.
PERFORM DOWNLOADCREDITDATA USING P_PATH.
ENDFORM. " DOWNLOAD_CREDIT_DATA
*& Form GET_PGRESS_INDICATOR
text
-->P_L_TEXT text
-->P_L_PCT text
FORM GET_PGRESS_INDICATOR USING L_TEXT
L_PCT.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = l_pct
TEXT = l_TEXT.
ENDFORM. " GET_PGRESS_INDICATORIf you are just Downloading to a Flat file then why dont you have logic in place for the program to dump the data read into the file to that point depending on any criteria like accounts or customer then clear the internal table and run it in the back ground.
try to use cursor to read the records from the table which will make it a bit more efficient than plain select stement. -
How do I trap a time out error on DataFinder
Greetings
I need to trap a time out error coming from datafinder.
I tried vbs "On Error" but the Err.Description I get is "The operation Search was timed out".
If I manually set the same query on the GUI I get results back, but when using code on a long list of queries, sometimes I get a time out error and it stops the process.
I want to capture this error and proceed to the next query but I would also like to have some more details.
I am aware that I can tweak the timeout settings on the datafinder to increase the time, but the real problem I am chasing is a linear time increase I am observing on a list of thousands of queries.
They start fast but I am observing a small increment of time added on each subsequent query and eventually it adds up to the point it returns the timeout error.
The process takes many hours before I get an error, if any, so I would like to get as many details as possible.
Is there any other way than using "On Error Resume Next" that would give me more details?
Also, has this linear time increase been observed before?
Thank you
Jose A Rafols
ETS - Software Engineer
Honeywell Aerospace of Puerto Rico Inc.
San Antonio Industrial Park
Road #110 North Km. 5.9
Aguadilla, PR 00604Hi Jose,
This isn't an answer to the question you're asking, but it might still help. DIAdem 2015, which is in Beta right now, has a new query mode that returns only the desired property columns from a query-- not all properties (and parent properties) regardless of what's displayed. This new query mechanism enables you to greatly exceed the old 32000 search result limit, and it generally runs something like 5x to 10x faster than the regular query method. It's possible that with this new approach you could avoid altogether the timeouts you're currently struggling to trap.
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
Time Out error problem when i run the report for the whole plant
Dear all,
pls find the below coding, when i execute this report for the whole plant , it gives me time out error since it has to process huge database. pls suggest me in which part of my below coding i can improvise or any other better way to fetch the same result.
pls note that
i m using Views for querying.pls also note the comments given in Bold to understand the reason behind the coding.
Views used in are - ZVPOD and ZVPRDCONF.
START-OF-SELECTION.
Data: zstat type jest-stat.
data: stklocaf type mska-lgort.
data: stklocas type mska-lgort.
<u><b>To collect the status of the production order by joining the ZVPOD and JEST table.</b></u>
CLEAR it_ZVPRODDET.
SELECT DISTINCT ZVPOD~bukrs ZVPOD~aufnr ZVPOD~objnr
jest~stat ZVPOD~werks ZVPOD~arbpl ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN jest ON ZVPOD~objnr = jest~objnr
INTO CORRESPONDING FIELDS OF wa_ZVPRODDET where
plnbez in FGM and arbpl in wc and werks in plant
and SSAVD in eldate
and J_3AKORD2 in cups and jest~inact ne 'X'.
APPEND wa_ZVPRODDET TO it_ZVPRODDET.
ENDSELECT.
SORT it_ZVPRODDET BY aufnr stat.
<u><b>Loop thru Itab to check and delete the records from itab for the specified status.</b></u>
LOOP AT it_ZVPRODDET INTO wa_ZVPRODDET.
IF wa_ZVPRODDET-stat = 'I0045' . " TECO - compl
DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
ELSEIF wa_ZVPRODDET-stat = 'I0009' . " CNF - Confirmed
DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
ELSEIF wa_ZVPRODDET-stat = 'I0012' . " DLV - Delivered
DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
ELSEIF wa_ZVPRODDET-stat = 'I0046' . " CLSD - Closed
DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
ELSEIF wa_ZVPRODDET-stat = 'I0076' . " DLFL - Del Flag
DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
ELSEIF wa_ZVPRODDET-stat = 'E0003' . " SCLS - Short Close
CLEAR tj30t.
SELECT SINGLE txt04
FROM tj30t INTO tj30t-txt04
WHERE stsma = 'PRDHOLD' AND
estat = 'E0003' AND
txt04 = 'SCLS' AND
spras = 'EN'.
IF sy-subrc = 0.
DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
ENDIF.
ENDIF.
* Condition for Prod Order released - REL
IF wa_ZVPRODDET-stat = 'I0002'.
mreleased = 'Y'.
else.
mreleased = 'N'.
endif.
zstat = wa_ZVPRODDET-stat.
IF mreleased = 'N'.
DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr
and stat = zstat.
ENDIF.
ENDLOOP.
<u><b>Loop thru the filtered ITAB to get all the production order details for the production order number specified in the where clause( zaufnr ) and populate another internal table.</b></u>
LOOP AT it_ZVPRODDET INTO wa_ZVPRODDET.
zaufnr = wa_zvproddet-aufnr.
zarbid = wa_zvproddet-arbid.
at new aufnr.
SELECT DISTINCT * INTO CORRESPONDING FIELDS OF walnpln
FROM zvpod where plnbez in FGM and arbpl in wc and SSAVD in
eldate and werks in plant and J_3AKORD2 in cups and aufnr = zaufnr.
APPEND walnpln TO itablnpln.
endselect.
endat.
endloop.
clear walnpln.
<u><b>
Looping thru Internal table and performs all the following calculations and inner loop
and also relevant querying.</b></u>
<u><b>Assume that ITABLNPLN holds appox. 8000 records.</b></u>
LOOP AT itablnpln INTO walnpln.
contot = 0.
SELECT distinct * INTO CORRESPONDING FIELDS OF TABLE itablnp
FROM zvprdconf where aufnr = walnpln-aufnr and
j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
clear zvprdconf.
SELECT single isdd
FROM zvprdconf into zvprdconf-isdd
where aufnr = walnpln-aufnr and
j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
SELECT single isdz
FROM zvprdconf into zvprdconf-isdz
where aufnr = walnpln-aufnr and
j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
IF sy-subrc EQ 0.
<u><b>Assume that ITABLNP holds appox. 30 records.</b></u>
loop at itablnp into walnp.
contot = contot + walnp-J_3ALMNGA.
move walnp-J_3ASIZE to walnpln-J_3ASIZE.
move zvprdconf-isdd to walnpln-zdate.
move zvprdconf-isdz to walnpln-ztime.
endloop.
walnpln-output = contot.
endif.
walnpln-wip = walnpln-menge - contot.
if walnpln-werks = '1000'.
stklocaf = '1050'.
stklocas = '1060'.
elseif walnpln-werks = '2000'.
stklocaf = '2150'.
stklocas = '2160'.
endif.
select single kunnr into walnpln-ship from vbpa where
vbeln = walnpln-KDAUF and PARVW = 'WE'.
zship = walnpln-ship.
move zship to walnpln-ship.
select single kalab into walnpln-zactqty from mska
where matnr = walnpln-plnbez
and j_3asize = walnpln-J_3AKORDX and LGORT = stklocaf.
condense walnpln-kdauf.
zsales = walnpln-kdauf.
concatenate zsales 'S' into zso.
select single kalab into walnpln-zsndqty from mska
where matnr = walnpln-plnbez
and j_3asize = walnpln-J_3AKORDX and LGORT = stklocas
and J_4KSCAT = zso.
zmatn = walnpln-plnbez.
zsale = walnpln-KDAUF.
walnpln-kdauf = zsale.
walnpln-plnbez = zmatn.
zcust = walnpln-kunnr.
walnpln-kunnr = zcust.
select single bezei into walnpln-season from TVV2T where
kvgr2 = walnpln-kvgr2 and SPRAS = 'E'.
select single bezei into walnpln-shipmode from T173T where
vsart = walnpln-vsart and SPRAS = 'E'.
STRL = strlen( walnpln-j_3akord2 ).
if strl = 4.
move walnpln-j_3akord2 to walnpln-j_3akord3.
clear walnpln-j_3akord2.
endif.
move zremk to walnpln-remk.
MODIFY itablnpln FROM walnpln.
contot = 0.
clear itablnp.
ENDLOOP.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.Hi raja,
Plese go through the suggessitions.
1.avoide the select ...endselect. write the below select
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
ZVPOD~BUKRS
ZVPOD~AUFNR
ZVPOD~OBJNR
JEST~STAT
ZVPOD~WERKS
ZVPOD~ARBPL
ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
WHERE PLNBEZ IN FGM AND
ARBPL IN WC AND
WERKS IN PLANT AND
SSAVD IN ELDATE AND
J_3AKORD2 IN CUPS AND
JEST~INACT NE 'X'.
IF SY-SUBRC = 0.
SORT TABLE IT_ZVPRODDET.
ENDIF.
2..first of all dont delete a record inside the loop. instead use the Field symobols.
have u obsereved you code in the loop!!!!. wht u r doing..
u r removing the same record which u in the loop..
If u wanto delete the entires with check to<b> stat</b>... <b>then.. why dont u put the STAT field in Wher e condition..?</b> by this you reduce the data base select time..
Now the select query is like the below....
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
ZVPOD~BUKRS
ZVPOD~AUFNR
ZVPOD~OBJNR
JEST~STAT
ZVPOD~WERKS
ZVPOD~ARBPL
ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
WHERE PLNBEZ IN FGM AND
ARBPL IN WC AND
WERKS IN PLANT AND
SSAVD IN ELDATE AND
J_3AKORD2 IN CUPS AND
JEST~INACT NE 'X' AND
( STAT <> 'I0045' AND
STAT <> 'I0045' AND
STAT <> 'I0009' AND
STAT <> 'I0012' AND
STAT <> 'I0046' AND
STAT <> 'I0076' AND
STAT <> 'E0003' ).
IF SY-SUBRC = 0.
SORT TABLE IT_ZVPRODDET.
ENDIF.
<b>3.</b> WHT IS MEANING OF THE SELECT
<b> CLEAR TJ30T.
SELECT SINGLE TXT04
FROM TJ30T INTO TJ30T-TXT04
WHERE STSMA = 'PRDHOLD' AND
ESTAT = 'E0003' AND
TXT04 = 'SCLS' AND
SPRAS = 'EN'.
IF SY-SUBRC = 0.
DELETE IT_ZVPRODDET WHERE AUFNR = WA_ZVPRODDET-AUFNR.
ENDIF.</b>....... IN WHERE CONDION U R GIven all are constant values right?..
why u need select it inside the loop.. u can write before the SELECT from ZVPOD..
that why first checke this field then go for fur thure selects..
<b>now u r code looks like this....</b>
CLEAR TJ30T.
SELECT SINGLE TXT04
FROM TJ30T INTO TJ30T-TXT04
WHERE STSMA = 'PRDHOLD' AND
ESTAT = 'E0003' AND
TXT04 = 'SCLS' AND
SPRAS = 'EN'.
IF SY-SUBRC = 0.
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
ZVPOD~BUKRS
ZVPOD~AUFNR
ZVPOD~OBJNR
JEST~STAT
ZVPOD~WERKS
ZVPOD~ARBPL
ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
WHERE PLNBEZ IN FGM AND
ARBPL IN WC AND
WERKS IN PLANT AND
SSAVD IN ELDATE AND
J_3AKORD2 IN CUPS AND
JEST~INACT NE 'X' AND
JEST~STAT <> 'I0045' AND
JEST~STAT <> 'I0045' AND
JEST~STAT <> 'I0009' AND
JEST~STAT <> 'I0012' AND
JEST~STAT <> 'I0046' AND
JEST~STAT <> 'I0076' AND
JEST~STAT <> 'E0003' ).
IF SY-SUBRC = 0.
SORT TABLE IT_ZVPRODDET.
ENDIF.
ENDIF.
there are so many select inside the loop...... please Delete all of them.... write them be for the loop.......using the FOR ALL ENTRIES.....
THEN LOOP THE TABLE USING THE WHERE CONDITIONS.
<b>Plese write u updated code here again</b>.. -
Time out error in report - Urgent
Hi Gurus,
Am developing the report for GL Account summary from tables bkpf, bseg. Due to lot of records in production server it is coming time out error. Please help me regarding this here am attaching my code.
REPORT ZFBLREPORT.
*TABLES : zgltax.
TYPE-POOLS : SLIS.
TYPES : BEGIN OF TY_ZGLTAX,
ZGL TYPE BSEG-HKONT,
ZTAX1 TYPE P DECIMALS 2,
ZTAX2 TYPE P DECIMALS 2,
CAMOUNT TYPE RF42B-SALDO,
PAMOUNT TYPE RF42B-SALDO,
TCAMOUNT TYPE RF42B-SALDO,
TPAMOUNT TYPE RF42B-SALDO,
END OF TY_ZGLTAX.
TYPES : BEGIN OF TY_BKPF,
BELNR TYPE BKPF-BELNR,
BUDAT TYPE BKPF-BUDAT,
END OF TY_BKPF.
TYPES : BEGIN OF TY_BSEG,
BELNR TYPE BSIS-BELNR,
DMBTR TYPE BSIS-DMBTR,
SHKZG TYPE BSIS-SHKZG,
HKONT TYPE BSIS-HKONT,
BUDAT TYPE BSIS-BUDAT,
BUZEI TYPE BSIS-BUZEI,
END OF TY_BSEG.
DATA : IT_FINAL TYPE STANDARD TABLE OF TY_ZGLTAX,
WA_FINAL TYPE TY_ZGLTAX.
DATA : IT_BKPF TYPE STANDARD TABLE OF TY_BKPF,
WA_BKPF TYPE TY_BKPF.
DATA : IT_BSEG TYPE STANDARD TABLE OF TY_BSEG,
WA_BSEG TYPE TY_BSEG.
DATA: CAMOUNT TYPE RF42B-SALDO,
PAMOUNT TYPE RF42B-SALDO.
DATA : INDEX TYPE SY-INDEX.
DATA : ID TYPE SY-TABIX.
DATA : START_DATE TYPE SY-DATUM.
DATA : END_DATE TYPE SY-DATUM.
DATA : START_QUATER TYPE SY-DATUM.
DATA : YEAR1(4) TYPE C.
DATA : T_FIELDALV TYPE SLIS_T_FIELDCAT_ALV.
DATA : IMPORT_VARIANT LIKE DISVARIANT.
DATA : XREPID LIKE SY-REPID.
DATA : LAYOUT TYPE SLIS_LAYOUT_ALV.
SELECTION-SCREEN BEGIN OF BLOCK BK1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_PERIOD(1) TYPE C OBLIGATORY,
P_YEAR(4) TYPE C OBLIGATORY.
SELECTION-SCREEN END OF BLOCK BK1.
AT SELECTION-SCREEN ON P_PERIOD.
IF P_PERIOD > '4' OR P_PERIOD < '1'.
P_PERIOD = ''.
MESSAGE 'Enter Correct Quater Period' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
PERFORM CALC_DATE.
PERFORM BUILD_LOGIC.
PERFORM INITIAL_ALV_FIELDCAT CHANGING T_FIELDALV[].
PERFORM LAYOUT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_GRID_TITLE = 'FBT Report'
i_callback_top_of_page = 'FORM_TOP_PAGE'
it_sort = p_sort
IS_LAYOUT = LAYOUT
IT_FIELDCAT = T_FIELDALV[]
I_SAVE = 'A'
TABLES
T_OUTTAB = IT_FINAL.
*& Form calc_date
text
--> p1 text
<-- p2 text
FORM CALC_DATE .
IF P_PERIOD = '1'.
CONCATENATE P_YEAR '04' '01' INTO START_DATE.
CONCATENATE P_YEAR '04' '01' INTO START_QUATER.
CONCATENATE P_YEAR '06' '30' INTO END_DATE.
ELSEIF P_PERIOD = '2'.
CONCATENATE P_YEAR '04' '01' INTO START_DATE.
CONCATENATE P_YEAR '07' '01' INTO START_QUATER.
CONCATENATE P_YEAR '09' '30' INTO END_DATE.
ELSEIF P_PERIOD = '3'.
CONCATENATE P_YEAR '04' '01' INTO START_DATE.
CONCATENATE P_YEAR '10' '01' INTO START_QUATER.
CONCATENATE P_YEAR '12' '31' INTO END_DATE.
ELSEIF P_PERIOD = '4'.
CONCATENATE P_YEAR '04' '01' INTO START_DATE.
YEAR1 = P_YEAR + 1.
CONCATENATE YEAR1 '01' '01' INTO START_QUATER.
CONCATENATE YEAR1 '03' '31' INTO END_DATE.
ENDIF.
ENDFORM. " calc_date
*& Form build_logic
text
--> p1 text
<-- p2 text
FORM BUILD_LOGIC .
SELECT * FROM ZGLTAX INTO CORRESPONDING FIELDS OF TABLE IT_FINAL.
IF IT_FINAL[] IS NOT INITIAL.
LOOP AT IT_FINAL INTO WA_FINAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_FINAL-ZGL
IMPORTING
OUTPUT = WA_FINAL-ZGL.
INDEX = SY-TABIX.
SELECT belnr dmbtr shkzg hkont budat buzei
SELECT *
FROM BSIS
INTO CORRESPONDING FIELDS OF TABLE IT_BSEG
WHERE
BUKRS = '3599' AND
HKONT = WA_FINAL-ZGL
AND GJAHR = P_YEAR.
Uses primary index (4.7)
SELECT *
FROM BSAS
APPENDING CORRESPONDING FIELDS OF TABLE IT_BSEG
WHERE
BUKRS = '3599' AND
HKONT = WA_FINAL-ZGL
AND GJAHR = P_YEAR.
LOOP AT IT_BSEG INTO WA_BSEG .
IF WA_BSEG-BUDAT >= START_DATE AND WA_BSEG-BUDAT <= END_DATE.
IF WA_BSEG-SHKZG = 'S'.
CAMOUNT = CAMOUNT - WA_BSEG-DMBTR.
ELSEIF WA_BSEG-SHKZG = 'H'.
CAMOUNT = CAMOUNT + WA_BSEG-DMBTR.
ENDIF.
ENDIF.
IF WA_BSEG-BUDAT >= START_QUATER AND WA_BSEG-BUDAT <= END_DATE.
IF WA_BSEG-SHKZG = 'S'.
PAMOUNT = PAMOUNT - WA_BSEG-DMBTR.
ELSEIF WA_BSEG-SHKZG = 'H'.
PAMOUNT = PAMOUNT + WA_BSEG-DMBTR.
ENDIF.
ENDIF.
ENDLOOP.
WA_FINAL-CAMOUNT = CAMOUNT.
WA_FINAL-PAMOUNT = PAMOUNT.
WA_FINAL-TCAMOUNT = CAMOUNT * WA_FINAL-ZTAX1 * WA_FINAL-ZTAX2 / (
100 * 100 ).
WA_FINAL-TPAMOUNT = PAMOUNT * WA_FINAL-ZTAX1 * WA_FINAL-ZTAX2 / (
100 * 100 ).
MODIFY IT_FINAL FROM WA_FINAL INDEX INDEX.
REFRESH IT_BSEG.
ENDLOOP.
ENDIF.
ENDFORM. " build_logic
*& Form layout
text
FORM LAYOUT .
LAYOUT-NO_SUBTOTALS = ' '.
ENDFORM. " LAYOUT
*& Form initial_alv_fieldcat
text
-->FIELDCAT text
FORM INITIAL_ALV_FIELDCAT CHANGING FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA : CNTR TYPE I VALUE 1.
CLEAR LS_FIELDCAT.
CNTR = CNTR + 1.
LS_FIELDCAT-COL_POS = CNTR.
LS_FIELDCAT-FIELDNAME = 'ZGL'.
LS_FIELDCAT-SELTEXT_L = 'GL A/C NO'.
LS_FIELDCAT-OUTPUTLEN = 15.
APPEND LS_FIELDCAT TO FIELDCAT.
CLEAR LS_FIELDCAT.
CNTR = CNTR + 1.
LS_FIELDCAT-COL_POS = CNTR.
LS_FIELDCAT-FIELDNAME = 'ZTAX1'.
LS_FIELDCAT-SELTEXT_L = 'BASE TAX PERCENTAGE'.
LS_FIELDCAT-OUTPUTLEN = 15.
APPEND LS_FIELDCAT TO FIELDCAT.
CLEAR LS_FIELDCAT.
CNTR = CNTR + 1.
LS_FIELDCAT-COL_POS = CNTR.
LS_FIELDCAT-FIELDNAME = 'ZTAX2'.
LS_FIELDCAT-SELTEXT_L = 'TAX PERCENTAGE'.
LS_FIELDCAT-OUTPUTLEN = 15.
APPEND LS_FIELDCAT TO FIELDCAT.
CLEAR LS_FIELDCAT.
CNTR = CNTR + 1.
LS_FIELDCAT-COL_POS = CNTR.
LS_FIELDCAT-FIELDNAME = 'CAMOUNT'.
LS_FIELDCAT-SELTEXT_L = 'CUMULATIVE AMOUNT'.
LS_FIELDCAT-OUTPUTLEN = 20.
APPEND LS_FIELDCAT TO FIELDCAT.
CLEAR LS_FIELDCAT.
CNTR = CNTR + 1.
LS_FIELDCAT-COL_POS = CNTR.
LS_FIELDCAT-FIELDNAME = 'TCAMOUNT'.
LS_FIELDCAT-SELTEXT_L = 'Cumulative Tax % Amount'.
LS_FIELDCAT-OUTPUTLEN = 20.
APPEND LS_FIELDCAT TO FIELDCAT.
CLEAR LS_FIELDCAT.
CNTR = CNTR + 1.
LS_FIELDCAT-COL_POS = CNTR.
LS_FIELDCAT-FIELDNAME = 'PAMOUNT'.
LS_FIELDCAT-SELTEXT_L = 'AMOUNT FOR PERIOD'.
LS_FIELDCAT-OUTPUTLEN = 20.
APPEND LS_FIELDCAT TO FIELDCAT.
CLEAR LS_FIELDCAT.
CNTR = CNTR + 1.
LS_FIELDCAT-COL_POS = CNTR.
LS_FIELDCAT-FIELDNAME = 'TPAMOUNT'.
LS_FIELDCAT-SELTEXT_L = 'Tax AMOUNT FOR PERIOD'.
LS_FIELDCAT-OUTPUTLEN = 20.
APPEND LS_FIELDCAT TO FIELDCAT.
ENDFORM. "initial_alv_fieldcat
Points will be awarded
Regards
RaviHi Ravi kanth,
You are using select * statement which is very time consuming and low performance. Dont use select * instead use select field1 field2.... into table itab where field1 = s_field. Use corresponding field names in the select statement.
Follow the below rules.
1) Dont use nested select statements
2) If possible use for all entries in addition
3) In the where addition make sure you give all the primary key
4) Use Index for the selection criteria.
5) You can also use inner joins
6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.
7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly
<b>reward if useful</b>.
Regards,
sunil kairam. -
ITunes shows time out error when trying to play on Airport Express.
Time out error when trying to play on Airport Express. This started with an iTunes update, problems has to be with iTunes, Airport Express appears to be communicating fine, even shows when speakers are not connected.
Same here, though on XP. Have tried cleaning registry, reinstalling, deleting preferences. Created a new user with no library and I have the problem there, too, so it's not the library.
Is there no one to call about this?? -
Adoafmctl.sh , adforsctl.sh have time out errors
when i run adstrtal.sh script i face some time out error in some script
for example
Executing service control script:
/opt/oracle/inst/apps/PROD_prodapps/admin/scripts/adoafmctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
ERROR : Timed out( 100000 ): Interrupted Exception
You are running adoafmctl.sh version 120.8
Starting OPMN managed OAFM OC4J instance ...
while some time the error is with adformsctl.sh
and at the end adstrtal.sh exit with status 1 and sometime with status2.
please help me how i resolve this error.<process-type id="*oafm*" module-id="OC4J" status="enabled" working-dir="$ORACLE_HOME/j2ee/home">
<module-data>
<category id="start-parameters">
<data id="java-options" value="-server -verbose:gc -Xmx256M -Xms64M -XX:MaxPermSize=128M -XX:NewRatio=2 -XX:+PrintGCTimeStamps -XX:+UseTLAB -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false -Doracle.security.jazn.config=/opt/oracle/inst/apps/PROD_testing/ora/10.1.3/j2ee/oafm/config/jazn.xml"/>
<data id="java-bin" value="/opt/oracle/inst/apps/PROD_testing/admin/scripts/java.sh"/>
<data id="oc4j-options" value="-out /opt/oracle/inst/apps/PROD_testing/logs/ora/10.1.3/opmn/oafmstd.out -err /opt/oracle/inst/apps/PROD_testing/logs/ora/10.1.3/opmn/oafmstd.err" />
</category>
<category id="stop-parameters">
<data id="java-options" value="-server -verbose:gc -Xmx256M -Xms64M -XX:MaxPermSize=128M -XX:NewRatio=2 -XX:+PrintGCTimeStamps -XX:+UseTLAB -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false"/>
</category>
<category id="security-parameters">
<data id="wallet-file" value="file:/opt/oracle/inst/apps/PROD_testing/certs/Apache"/>
</category>
</module-data>
<start timeout="*600*" retry="2"/> *'' we will change this value to 1800 ?''*
<stop timeout="120"/>
<restart timeout="720" retry="2"/> *'' do we need to change this value ?''*
<port id="default-web-site" range="25000-25004" protocol="ajp"/>
<port id="rmi" range="25500-25504"/>
<port id="jms" range="24500-24504"/>
<process-set id="default_group" numprocs="1"/>
</process-type>
</ias-component>
</ias-instance>
</process-manager>
</opmn> -
Select count(*) cause time out error
I invoke the following statement:
select count(*) as total from table1
where table1 is large(30000 rows), total size of the database is more than 20GB.
The above statement will cause time out error. How to solve the problem?Hallo chcw,
a timeout in a table with 30.000 records is very unusual (for a simple SELECT COUNT). From my point of view Dan is on the right way and you will have a typical blocking scenario.
1. if you have LOBs they won't be part of a SELECT COUNT (either its a heap of a clustered index)
2. Microosft SQL Server will ALWAYS use the smallest index for such a simple SELECT
3. if it is a heap you will run into a blocking scenario if someone is updating records and transaction has not committed.
4. Check the isolation level of the transactions - but I expect the standard which is "read committed".
Just a demonstration of "SELECT COUNT" will work whether it is a clustered index or a heap. The next script will create a heap with a LOB and additional attributes:
CREATE TABLE dbo.foo
Id INT NOT NULL IDENTITY(1,1),
n1 INT NOT NULL,
n2 SMALLINT NULL,
c1 CHAR(250) NOT NULL,
c2 CHAR(250) NULL,
c3 VARCHAR(MAX) NOT NULL DEFAULT (REPLICATE('A', 15000))
GO
Now we enter 30,000 records into the table
SET NOCOUNT ON;
DECLARE @i INT = 1;
WHILE @i <= 30000
BEGIN
INSERT INTO dbo.foo (n1, c1) VALUES (@i, 'Just a filler');
SET @i += 1;
END
GO
Keep in mind that we have a HEAP and NO indexes! To check the IO i use the following command befor any of the following examples:
SET STATISTICS IO ON;
GO
Let's start with a first try and you will check as a result the produced IO depending on the affected table partitions:
-- USE SELECT in a HEAP
SELECT COUNT(*) FROM dbo.foo;
GO
Output:
Table 'foo'. Scan count 1, logical reads 2508, ..., lob logical reads 0,
As you can see from the result the LOB-data won't be attached only the "in-row-data" are affected (which are stored in 2508 pages. The reason is a quite simple one: Microsoft SQL Server uses different allocation units for in-row-data and LOB
SELECT p.object_id, p.index_id, p.rows, au.total_pages
FROM sys.partitions AS P INNER JOIN sys.allocation_units AS AU
ON(p.partition_id = au.container_id)
WHERE object_id = OBJECT_ID('dbo.foo');
Now I create a simple index on the column n1 which is an INT-datatype
SELECT p.object_id, p.index_id, p.rows, au.total_pages
FROM sys.partitions AS P INNER JOIN sys.allocation_units AS AU
ON(p.partition_id = au.container_id)
WHERE object_id = OBJECT_ID('dbo.foo');
and run the SELECT COUNT again with the following IO-output:
Table 'foo'. Scan count 1, logical reads 69, ...
WOW - only 69 pages have to be read. The explanation is a quite simple one - now we have an index which is quite small. Microsoft SQL Server WILL use the smallest index of a table to scan the number of records. Let's try it again with n2 which is a smallint
(2 bytes)
CREATE NONCLUSTERED INDEX ix_foo_n2 ON dbo.foo (n2);
GO
The IO will be 62 (or less) because MORE index records a fitting to one data page!
Conclusion is that either you have small record size or long record size - The query optimizer will always use the smallest index for the execution (that's maybe why Visahk has asked for the execution plan).
I don't believe it is because of the "huge amount of data" but - as Dan has pointed out - it HAS TO BE a blocking scenario which can have multiple reasons. For demonstration of a blocking scenario open SSMS and start in the query windows with the following
command(s):
BEGIN TRANSACTION
UPDATE dbo.foo
SET c1 = 'This is my name'
WHERE Id = 10000;
-- What locks do we have now in the database
SELECT resource_description,
resource_associated_entity_id,
request_mode,
request_type
FROM sys.dm_tran_locks AS DTL
WHERE resource_database_id = DB_ID() AND
resource_type != 'DATABASE';
Your result should look like that (with differences in the entity_id and resource descriptions :)
The above pic demonstrates the "locking chain". As you can see the slot 7 on PAGE 82400 has an exclusive lock. This means that NO OTHER request can currently obtain another lock to it!
Now open a second query window and run a SELECT COUNT... - it will not finish!
The reason is that the second requests has to wait for the release of the locked resources by the first transaction! Leave the statement and change back to the first transaction and finish the transaction by cancellation of the query. In the moment the locks
have been released the second query will finish immediate.
So - from my point of view - Dan has given the correct answer. Against wide spreaded statements a heap won't block the whole table exclusivly but - as in a cluster, too - only the row itself (see the 7 which is the slot where the record exists).
MCM - SQL Server 2008
MCSE - SQL Server 2012
db Berater GmbH
SQL Server Blog (german only) -
Getting time out error when running the assigned verification in DRM 9.3.2.
Hi,
I have installed DRM 9.3.2.0.0 in my system (windows 7), when i am trying to run assigned verifications i am getting the time out error within a minute.
As suggested by oracle,I have added DWORD with value 480000 under Master Data Management in Registry editor. But still getting the error.
Please suggest a solution for this issue.
regards,
sathiyaPlease suggest me the solution.
regards,
sathiya -
Performance issue in Report (getting time out error)
Hi experts,
I am doing Performance for a Report (getting time out error)
Please see the code below and .
while looping internal table IVBAP after 25 minutes its showing time out error at this poit ->
SELECT MAX( ERDAT ) .
please send alternate code for this .
Advance thanks
from
Nagendra
Get Sales Order Details
CLEAR IVBAP.
REFRESH IVBAP.
SELECT VBELN POSNR MATNR NETWR KWMENG WERKS FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE IVBAP
FOR ALL ENTRIES IN IVBAK
WHERE VBELN = IVBAK-VBELN
AND MATNR IN Z_MATNR
AND WERKS IN Z_WERKS
AND ABGRU = ' '.
Check for Obsolete Materials - Get Product Hierarhy/Mat'l Description
SORT IVBAP BY MATNR WERKS.
CLEAR: WK_MATNR, WK_WERKS, WK_PRDHA, WK_MAKTX,
WK_BLOCK, WK_MMSTA, WK_MSTAE.
LOOP AT IVBAP.
CLEAR WK_INVDATE. "I6677.sn
SELECT MAX( ERDAT ) FROM VBRP INTO WK_INVDATE WHERE
AUBEL EQ IVBAP-VBELN AND
AUPOS EQ IVBAP-POSNR.
IF SY-SUBRC = 0.
MOVE WK_INVDATE TO IVBAP-INVDT.
MODIFY IVBAP.
ENDIF. "I6677.e n
SELECT SINGLE * FROM MBEW WHERE "I6759.sn
MATNR EQ IVBAP-MATNR AND
BWKEY EQ IVBAP-WERKS AND
BWTAR EQ SPACE.
IF SY-SUBRC = 0.
MOVE MBEW-STPRS TO IVBAP-STPRS.
IVBAP-TOT = MBEW-STPRS * IVBAP-KWMENG.
MODIFY IVBAP.
ENDIF. "I6759.en
IF IVBAP-MATNR NE WK_MATNR OR IVBAP-WERKS NE WK_WERKS.
CLEAR: WK_BLOCK, WK_MMSTA, WK_MSTAE, WK_PRDHA, WK_MAKTX.
MOVE IVBAP-MATNR TO WK_MATNR.
MOVE IVBAP-WERKS TO WK_WERKS.
SELECT SINGLE MMSTA FROM MARC INTO MARC-MMSTA
WHERE MATNR = WK_MATNR
AND WERKS = WK_WERKS.
IF NOT MARC-MMSTA IS INITIAL.
MOVE '*' TO WK_MMSTA.
ENDIF.
SELECT SINGLE LVORM PRDHA MSTAE MSTAV FROM MARA
INTO (MARA-LVORM, MARA-PRDHA, MARA-MSTAE, MARA-MSTAV)
WHERE MATNR = WK_MATNR.
IF ( NOT MARA-MSTAE IS INITIAL ) OR
( NOT MARA-MSTAV IS INITIAL ) OR
( NOT MARA-LVORM IS INITIAL ).
MOVE '*' TO WK_MSTAE.
ENDIF.
MOVE MARA-PRDHA TO WK_PRDHA.
SELECT SINGLE MAKTX FROM MAKT INTO WK_MAKTX
WHERE MATNR = WK_MATNR
AND SPRAS = SY-LANGU.
ENDIF.
IF Z_BLOCK EQ 'B'.
IF WK_MMSTA EQ ' ' AND WK_MSTAE EQ ' '.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSEIF Z_BLOCK EQ 'U'.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSE.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
MOVE '*' TO WK_BLOCK.
ENDIF.
ENDIF.
IF WK_PRDHA IN Z_PRDHA. "I4792
MOVE WK_BLOCK TO IVBAP-BLOCK.
MOVE WK_PRDHA TO IVBAP-PRDHA.
MOVE WK_MAKTX TO IVBAP-MAKTX.
MODIFY IVBAP.
ELSE. "I4792
DELETE IVBAP. "I4792
ENDIF. "I4792
IF NOT Z_ALNUM[] IS INITIAL. "I9076
SELECT SINGLE * FROM MAEX "I9076
WHERE MATNR = IVBAP-MATNR "I9076
AND ALNUM IN Z_ALNUM. "I9076
IF SY-SUBRC <> 0. "I9076
DELETE IVBAP. "I9076
ENDIF. "I9076
ENDIF. "I9076
ENDLOOP.Hi Nagendra!
Get Sales Order Details
CLEAR IVBAP.
REFRESH IVBAP.
check ivbak is not initial
SELECT VBELN POSNR MATNR NETWR KWMENG WERKS FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE IVBAP
FOR ALL ENTRIES IN IVBAK
WHERE VBELN = IVBAK-VBELN
AND MATNR IN Z_MATNR
AND WERKS IN Z_WERKS
AND ABGRU = ' '.
Check for Obsolete Materials - Get Product Hierarhy/Mat'l Description
SORT IVBAP BY MATNR WERKS.
CLEAR: WK_MATNR, WK_WERKS, WK_PRDHA, WK_MAKTX,
WK_BLOCK, WK_MMSTA, WK_MSTAE.
avoid select widin loop. instead do selection outside loop.u can use read statement......and then loop if required.
LOOP AT IVBAP.
CLEAR WK_INVDATE. "I6677.sn
SELECT MAX( ERDAT ) FROM VBRP INTO WK_INVDATE WHERE
AUBEL EQ IVBAP-VBELN AND
AUPOS EQ IVBAP-POSNR.
IF SY-SUBRC = 0.
MOVE WK_INVDATE TO IVBAP-INVDT.
MODIFY IVBAP.
ENDIF. "I6677.e n
SELECT SINGLE * FROM MBEW WHERE "I6759.sn
MATNR EQ IVBAP-MATNR AND
BWKEY EQ IVBAP-WERKS AND
BWTAR EQ SPACE.
IF SY-SUBRC = 0.
MOVE MBEW-STPRS TO IVBAP-STPRS.
IVBAP-TOT = MBEW-STPRS * IVBAP-KWMENG.
MODIFY IVBAP.
ENDIF. "I6759.en
IF IVBAP-MATNR NE WK_MATNR OR IVBAP-WERKS NE WK_WERKS.
CLEAR: WK_BLOCK, WK_MMSTA, WK_MSTAE, WK_PRDHA, WK_MAKTX.
MOVE IVBAP-MATNR TO WK_MATNR.
MOVE IVBAP-WERKS TO WK_WERKS.
SELECT SINGLE MMSTA FROM MARC INTO MARC-MMSTA
WHERE MATNR = WK_MATNR
AND WERKS = WK_WERKS.
IF NOT MARC-MMSTA IS INITIAL.
MOVE '*' TO WK_MMSTA.
ENDIF.
SELECT SINGLE LVORM PRDHA MSTAE MSTAV FROM MARA
INTO (MARA-LVORM, MARA-PRDHA, MARA-MSTAE, MARA-MSTAV)
WHERE MATNR = WK_MATNR.
IF ( NOT MARA-MSTAE IS INITIAL ) OR
( NOT MARA-MSTAV IS INITIAL ) OR
( NOT MARA-LVORM IS INITIAL ).
MOVE '*' TO WK_MSTAE.
ENDIF.
MOVE MARA-PRDHA TO WK_PRDHA.
SELECT SINGLE MAKTX FROM MAKT INTO WK_MAKTX
WHERE MATNR = WK_MATNR
AND SPRAS = SY-LANGU.
ENDIF.
IF Z_BLOCK EQ 'B'.
IF WK_MMSTA EQ ' ' AND WK_MSTAE EQ ' '.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSEIF Z_BLOCK EQ 'U'.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSE.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
MOVE '*' TO WK_BLOCK.
ENDIF.
ENDIF.
IF WK_PRDHA IN Z_PRDHA. "I4792
MOVE WK_BLOCK TO IVBAP-BLOCK.
MOVE WK_PRDHA TO IVBAP-PRDHA.
MOVE WK_MAKTX TO IVBAP-MAKTX.
MODIFY IVBAP.
ELSE. "I4792
DELETE IVBAP. "I4792
ENDIF. "I4792
IF NOT Z_ALNUM[] IS INITIAL. "I9076
SELECT SINGLE * FROM MAEX "I9076
WHERE MATNR = IVBAP-MATNR "I9076
AND ALNUM IN Z_ALNUM. "I9076
IF SY-SUBRC 0. "I9076
DELETE IVBAP. "I9076
ENDIF. "I9076
ENDIF. "I9076
endloop.
U have used many select queries widin loop-endloop which is a big hindrance as far as performance is concerned.Avoid such practice.
Thanks
Deepika -
Hi,
We are trying to invoke a Web Service from BPEL Process (10.1.3.3.0) and we received below time out error message in em console.
</part></Invoke_1_setJobPostingXML_InputVariable></input><fault><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Read timed out</summary>
Problem here is this error is not coming for all the invocation. For ex. We have posted the input payload at 3:15:34PM today and it thrown an error at 3:45:12 PM with above message. Also its not huge load hitting their server as we are calling the webservice once in 4-5 mins and if we repost the same message, its posting without any issue. This time out error comes 4-5 times daily and want to understand why it occurs everyday.
1. Will BPEL receive an error if we post huge payload to web service?
2. Do we need to set some waiting time to receive the response after posting the data to Web service?
3. Other possible scneario's for timeout error?
Thanks,
SaravanaHi Saravana,
It's likely to be a problem at the remote side or a network latency/communication problem...
How can you affirm "its not huge load hitting their server"? Your service may not be the only source of load...
Cheers,
Vlad -
Dear All,
One of our production system and one of HR user got time out error while executing T-code PA30 , PA40 .
Note : we tried the transaction ( PA30 and PA40 ) in our user id ,it work smooth ,there is no issue with in my user id as well other HR user also .
Only the specific user facing time out error in Production server.
Note : while executing PA30 ,PA40 t-codes ,it takes long time to get initial screen itself finally got time out error (No issue with other SAP HR users) .
Pls check the below logs:
Runtime Error TIME_OUT
Occurred on 17.08.2011 at 08:59:00
Time limit exceeded.
What happened?
The program "SAPLRHAC" has exceeded the maximum permitted runtime without
interruption, and has therefore been terminated.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
After a certain length of time, the program is terminated. In the case
of a work area, this means that
- endless loops (DO, WHILE, ...),
- database accesses producing an excessively large result set,
Kindly advise ,is this related to any Authorization issue ???Hi,
Please share SAP_BASIS/ SAP_HR release/patch level information of the affected SAP system.
I would suggest you to create New Temp SAP User id with exact copy of that affected SAP User ID and then try to access PA30/PA40 with that New SAP User id login into affected system. Check that, u are facing the same behavior/issue with that New Temp SAP User id ?
Regards,
Bhavik G. Shroff -
Time out error on deploying to SAP-J2EE engine.
I got a problem while deploying to SAP-J2EE engine using ant. It takes a lot of time and then throws a time out error.
The problem is with the web.xml file pointing to a DTD in the internet, I have pasted some part of the web.xml below,
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
<display-name>MyPay</display-name>
<description>MyPay</description>
Once I write down the DTD description in the web.xml itself, it works fine.
I have pasted the error trace below,
j2eedeploy:
[echo] Deploying to Local environment...
[echo] C:\Java\Projects/MyPay/dist/MyPay.ear
BUILD FAILED
C:\Java\Projects\MyPay\build.xml:445: java.lang.RuntimeException: ERROR: ID90507: Error occured during getting EARDescriptor : Failed to load resource from the context classloader of the current thread! Loading from classloader was caused by: java.net.ConnectException: Connection timed out: connect
Exception is :
java.io.IOException: Failed to load resource from the context classloader of the current thread! Loading from classloader was caused by: java.net.ConnectException: Connection timed out: connect
at com.sap.engine.lib.xml.parser.URLLoaderBase.resolveEntity(URLLoaderBase.java:148)
at com.sap.engine.lib.xml.parser.XMLParser.scanDTD(XMLParser.java:1271)
at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2795)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2830)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342)
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
at com.inqmy.lib.xml.StandardDOMParser.parse(StandardDOMParser.java:127)
at com.inqmy.lib.xml.StandardDOMParser.parse(StandardDOMParser.java:120)
at com.inqmy.services.servlets_jsp.descriptor.jar.WebWar.getWebDescriptor(WebWar.java:98)
at com.inqmy.deploy.tool.deployer.ExtendedEarReader.loadDescriptorFromFile(ExtendedEarReader.java:175)
at com.inqmy.deploy.tool.deployer.ExtendedEarReader.getFullEarDescriptor(ExtendedEarReader.java:104)
at com.inqmy.deploy.manager.DeployManagerImpl.setEar(DeployManagerImpl.java:355)
at com.inqmy.deploy.manager.DeployManagerImpl.setEar(DeployManagerImpl.java:325)
at com.pg.sap.deploy620.SAPDeploy620Manager.process(SAPDeploy620Manager.java:84)
at com.pg.ant.tasks.j2ee620.J2ee620EngineDeployTask.execute(J2ee620EngineDeployTask.java:40)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)Thanks for your reply Kalyan,
The problem seems to be with my system, because I had run the same ant script in another system and it deployed successfully.
The problem does not seem to be with the dtd, whereas it seems that the SAP-J2EE engine is not able to open the link to the dtd giving a time out error.
Is it possible to switch off the validation process of the SAP-J2EE engine of an xml with the dtd? -
WIH 00013 time out error while viewing a BO Web intelligence report
Hi,
I have a BO web intelligence report. While viewing the report i get WIH 00013 time out error. I have another report with everything same as this one except for one filter condition. That is working fine but former is giving me an error.
I tried changing the timeout values to 120 minutes from 90 minutes in connection server setting but didn't work.
Also when i run the same report by scheduling it in CMC and format as PDF, then it works fine. This error only comes when i try to view the report directly from infoview.
Please let me know if there is any other way to resolve.
Thanks!
Edited by: Satya Suma on Mar 9, 2011 1:31 PM
Edited by: Satya Suma on Mar 9, 2011 2:00 PMHi Suma,
These links may be helpful to you:
WIH00013 - Invalid Session
WIH 00013: Invalid session
All the Best,
Madhu....
Maybe you are looking for
-
updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see
-
Photoshop CS2 Saving a file as .jpg
I recently installed Photoshop CS2 in my Windows 8.1 machine and now when I create an image in PHotoshop I don't have an option for saving the file as a .jpg in the drop down menu Can anyone help?
-
Call a Form using Webutil from the Menu loose focus on the applet
Hello, I have the following problem: When calling a form using webutil from the menu the focus on the applet (I mean the Forms Application window) is lost and I have to click on the window to get back the focus on the application. Any advice ? Env: F
-
1) I have created a Oracle Report that takes an employee id as a parameter and display the employee details . 2)Now I have been told to create another report that has the same format only difference now is that the report should be generated for all
-
Grand total showing wrong results
Hello, I am having one prblem,using obiee 11g. Have a pivot table with 3 columns, one is month and other are showing numbers. For month we show the 2 number columns when i click grand total its showing the wrong total for the second number column. I