Look at drafts on one server and publish on another

Can an administrator review drafts on one server (say a testing server) but publish them to a different server? If so how do you set that up?
Thanks,
Liz

          RMI, EJB or CORBA, etc, since your beans become remote objects. Of course, you
          can create your own protocol to achieve this, like serialize your Java beans on
          one server, transmit the bytes through your request/response protocol and deserialize
          them.
          [email protected] (Prasad Ajinkya) wrote:
          >Hey all!!
          >I am starting out on JSP, Java, et al and during my work I came across
          >a doubt...here goes,
          >
          >Can I have JSP pages on one server and my beans which I invoke in my
          >JSP pages on another server??
          >I am using Tomcat and jdk 1.3,
          >If this is possible what changes do I have to make in the config file
          >of Tomcat?? or is there a better method to achieve this??
          >
          >Many Thanx in advance!
          >
          >Regards,
          >Prasad A.

Similar Messages

SUBMIT works in one server and fails in another!!

Dear All,
I have the following SUBMIT statement that works in one server perfectly and fails in another with SY-SUBRC 8 [ Error in job scheduling (JOB_SUBMIT) ].
SUBMIT riaufk20 EXPORTING LIST TO MEMORY AND RETURN WITH SELECTION-TABLE seltab.
Below is the entire program. Any idea why this is happening ?
Thanks in advance,
Rajesh
""Local interface:
*" IMPORTING
*"     VALUE(P_AUART) LIKE DIAUFK-AUART
*" TABLES
*"      T_OUTPUT STRUCTURE ZLINE
DATA: i_list LIKE abaplist OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF i_list_conv OCCURS 1,
          line(256),
        END OF i_list_conv.
DATA: BEGIN OF i_order OCCURS 0,
          aufnr LIKE aufk-aufnr,
        END OF i_order.
DATA: seltab     TYPE TABLE OF rsparams,
        seltab_wa LIKE LINE OF seltab.
RANGES: r_aufnr FOR aufk-aufnr.
DATA: v_lines TYPE i.
MOVE: 'AUART' TO seltab_wa-selname,
        'S'      TO seltab_wa-kind,      " SELECT-OPTION
        'I'      TO seltab_wa-sign,
        'EQ'     TO seltab_wa-option,
        p_auart TO seltab_wa-low,
        ' '      TO seltab_wa-high.
APPEND seltab_wa TO seltab.
SUBMIT riaufk20 EXPORTING LIST TO MEMORY AND RETURN WITH SELECTION-TABLE seltab.
CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
      listobject = i_list
    EXCEPTIONS
      not_found = 1
      OTHERS     = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
LIST_INDEX               = -1
WITH_LINE_BREAK          = ' '
IMPORTING
LIST_STRING_ASCII        =
   TABLES
     listasci                 = i_list_conv
     listobject               = i_list
   EXCEPTIONS
     empty_list               = 1
     list_index_invalid       = 2
     OTHERS                   = 3
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
DATA: v_text1(20).
LOOP AT i_list_conv.
    IF sy-tabix GT 3.
      SPLIT i_list_conv-line AT '|' INTO v_text1 i_list_conv-line.
      SPLIT i_list_conv-line AT '|' INTO v_text1 i_list_conv-line.
      SPLIT i_list_conv-line AT '|' INTO i_order-aufnr i_list_conv-line.
      APPEND i_order.
      CLEAR i_order.
    ENDIF.
ENDLOOP.
DESCRIBE TABLE i_order LINES v_lines.
DELETE i_order INDEX v_lines.
REFRESH seltab.
CLEAR   seltab_wa.
REFRESH i_list.
REFRESH i_list_conv.
SORT i_order.
LOOP AT i_order.
MOVE: 'AUFNR' TO seltab_wa-selname,
        'S'      TO seltab_wa-kind,      " SELECT-OPTION
        'I'      TO seltab_wa-sign,
        'EQ'     TO seltab_wa-option,
        i_order-aufnr TO seltab_wa-low,
        ' '     TO seltab_wa-high.
APPEND seltab_wa TO seltab.
ENDLOOP.
SUBMIT riafvc20 WITH SELECTION-TABLE seltab EXPORTING LIST TO MEMORY AND RETURN VIA SELECTION-SCREEN.
CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
      listobject = i_list
    EXCEPTIONS
      not_found = 1
      OTHERS     = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
LIST_INDEX               = -1
WITH_LINE_BREAK          = ' '
IMPORTING
LIST_STRING_ASCII        =
   TABLES
     listasci                 = i_list_conv
     listobject               = i_list
   EXCEPTIONS
     empty_list               = 1
     list_index_invalid       = 2
     OTHERS                   = 3
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
t_output[] = i_list_conv[].
ENDFUNCTION.

Rajesh,
Whatever parameters you are using in submit statement check those things are available in other server or not.
Regards,

Transfer files from One server(Solaris OS) to another server(Solaris OS)

Hi,
I want to Transfer files from One Server(Solaris OS) to another Server(Solaris OS) on private network through ftp and after transferring the files i want to delete these files from first server.
How can i do that ?
thanks

http://commons.apache.org/net/

Click on link in one portlet and open in another portlet

how do you click on link in one portlet and open in another portlet?

Hrmm... This is a IBM Question..
Officially this is a meaningless buzzword promoted by IBM. Portals are some sort of Servlet but IBM incapable of explaining how they differ from ordinary Servlets. Some speculate they are used to present a webpage with many services on it such as a search engine, and news that come from diverse sources. The user is able to dynamically configure the contents and layout of the page much like Netscape home pages
I don't understand what yhour asking..
I am assuming you want to call another servlet (portlet)? That would be absurd to do .. You let the HTTP request and XML file to deal with the response of the portlet

How do you take pictures from one library and put in another library??

How do you take pictures from one library and put in another library??

Options:
1. Export from iPhoto A to the Finder, then import to iPhoto B
This gets the photo over, but no versions, no edit history and not all the metadata
2. Use iPhoto Library Manager
This gets everything: versions, edit history and all the metadata.
Regards
TD

How to set cookie value in one page and retrieve in another page using setA

How to set cookie value in one page and retrieve in another page using setActionListener?
I have tried with following code srcpage.jspx->destpage.jspx
srcpage.jspx
<af:table value="#{bindings.DepartmentsView1.collectionModel}"
var="emp" rows="#{bindings.EMPView1.rangeSize}"
first="#{bindings.EMPView1.rangeStart}"
emptyText="#{bindings.DepartmentsView1.viewable ? 'No rows yet.' : 'Access Denied.'}">
<af:column sortProperty="EmployeeName" sortable="false"
headerText="Cookie Testing">
<af:commandLink text="#{emp.EmployeeName}" action="success">
<af:setActionListener from="#{emp.EmployeeName}"
to="#{cookie}"/>
</af:commandLink>
</af:column>
</af:table>
espage.jspx
<af:outputText value="Test Cookie Value: #{cookie}"/>
,Here Test Cookie Value prints the following instead of its original String value
{JSESSIONID=javax.servlet.http.Cookie@7da288, oracle.uix=javax.servlet.http.Cookie@399f62}
I have passed employee name "Robert" to cookie in srcpage.jspx,but it prints "JSESSIONID....." instead of "Robert" in destpage.jspx
Thanks in advance
Kalee

Hi,
"cookie" is a reserved name. If you want to write to a session scope attribute called "cookie" then you have to call #{sessionScope.cookie}. If you want to use EL to set and read from cookies then you will have to use
#{cookie.cookieName}
Note that #{cookie} writes to and returns a map
check this: http://www.informit.com/articles/article.aspx?p=30946&seqNum=7
Frank

I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?

I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?

What matters is the version of iPhoto you have on the different machines. Can you tell us what they are, and what exact error message you get.
Regards
TD

HT3819 i have all my itunes on one computer and have brought another and need to transfure all my exsisting music to this new computer, how do i do this? please help.

I have all my itunes on one computer and have brought another and need to transfer all my music etc to new one, how do i do this? please help its doing my head in!

Hey allen72,
Thanks for the question. I understand you wish to transfer your iTunes library to a new computer. There are a few different options for doing so, the following article provides more information:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Thanks,
Matt M.

How display top 3 revenues in one block and remaining in another block

How display top 3 revenues in one block and remaining in another block.

create a variable as
v_Rank =Rank([Revenue])
then create a block level filter on the 2nd block as v_Rank Greater than 3.
you may need to modify the variable formula as per requirement to get the rank of the row.

Bridge NOT able to connect to one server and send message

I have configure JMS bridge between MQ queue and a distributed queue ( which is targeting JMS servers in a cluster ).
Bridge is able to connect to all servers and transfer messages, except one.
Messages arriving on the MQ queue are delivered by the JMS bridge to all the JMS servers except one
We turned on debug on MessagingBridge on affected server and got the error msg in the attached log.
Following is the exception strace:
<Jan 21, 2010 7:22:19 PM EST> <Warning> <MessagingBridge> <BEA-200026> <Bridge "TsysTIPSBridge" encountered some problems in one of
its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The excepti
on caught was java.lang.Exception: javax.resource.ResourceException: Error sending message
at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1470)
at weblogic.jms.adapter.JMSBaseConnection.send(JMSBaseConnection.java:714)
at weblogic.jms.adapter.JMSConnectionHandle.send(JMSConnectionHandle.java:144)
at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1325)
at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1251)
at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:2070)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:2066)
at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:2969)
at com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:406)
at java.lang.Thread.run(Thread.java:595)
-------------- Linked Exception ------------
javax.resource.ResourceException: Error creating producer or sending message
at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1470)
at weblogic.jms.adapter.JMSBaseConnection.sendInternal(JMSBaseConnection.java:815)
at weblogic.jms.adapter.JMSBaseConnection.access$200(JMSBaseConnection.java:84)
at weblogic.jms.adapter.JMSBaseConnection$6.run(JMSBaseConnection.java:707)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.send(JMSBaseConnection.java:704)
at weblogic.jms.adapter.JMSConnectionHandle.send(JMSConnectionHandle.java:144)
at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1325)
at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1251)
at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:2070)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:2066)
at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:2969)
at com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:406)
at java.lang.Thread.run(Thread.java:595)
-------------- Linked Exception 2 ------------
javax.jms.MessageNotWriteableException: MQJMS0008: JMS Client attempts to write a read-only message
at com.ibm.jms.JMSMessage.newMessageNotWriteableException(JMSMessage.java:4782)
at com.ibm.jms.JMSMessage.setStringProperty(JMSMessage.java:5738)
at weblogic.jms.client.WLProducerImpl.send(WLProducerImpl.java)
at weblogic.jms.adapter.JMSBaseConnection.sendInternal(JMSBaseConnection.java:773)
at weblogic.jms.adapter.JMSBaseConnection.access$200(JMSBaseConnection.java:84)
at weblogic.jms.adapter.JMSBaseConnection$6.run(JMSBaseConnection.java:707)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.send(JMSBaseConnection.java:704)
at weblogic.jms.adapter.JMSConnectionHandle.send(JMSConnectionHandle.java:144)
at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1325)
at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1251)
at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:2070)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:2066)
at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:2969)
at com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:406)
at java.lang.Thread.run(Thread.java:595)
I am new to JMS
Please help

What version of WebLogic and MQ are you using?
Have you ensured that the target Destination and Connection Factory are both WebLogic artifacts (neither should reference an MQ resource)?
Tom

Events working on one server and not the other

We have a development and a production server for LC. I have events working on the development server that accept parameters.
The services were deployed to the production server and the following error occured:
2010-05-04 09:14:04,203 ERROR [STDERR] May 4, 2010 9:14:04 AM com.adobe.idp.scheduler.callback.ServiceCallbackHandler execute
SEVERE: Exception thrown while calling back a DSC componentINVALID_CHARACTER_ERR: An invalid or illegal XML character is specified.
2010-05-04 09:14:04,203 INFO [org.quartz.core.JobRunShell] Job Asynchronous.SWR.RAAC.RequestSendEmail:12729788401870.18563775243350922 threw a JobExecutionException:
org.quartz.JobExecutionException: java.lang.Exception: org.w3c.dom.DOMException: INVALID_CHARACTER_ERR: An invalid or illegal XML character is specified.
[See nested exception: java.lang.Exception: org.w3c.dom.DOMException: INVALID_CHARACTER_ERR: An invalid or illegal XML character is specified. ]
    at com.adobe.idp.scheduler.callback.ServiceCallbackHandler.execute(ServiceCallbackHandler.ja va:102)
    at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
    at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
Caused by: java.lang.Exception: org.w3c.dom.DOMException: INVALID_CHARACTER_ERR: An invalid or illegal XML character is specified.
    at com.adobe.idp.scheduler.callback.ServiceCallbackHandler.execute(ServiceCallbackHandler.ja va:101)
    ... 2 more
Caused by: org.w3c.dom.DOMException: INVALID_CHARACTER_ERR: An invalid or illegal XML character is specified.
    at org.apache.xerces.dom.CoreDocumentImpl.createElement(Unknown Source)
    at com.adobe.idp.event.xml.XMLGenerator.createElement(XMLGenerator.java:500)
    at com.adobe.idp.event.xml.XMLGenerator.createEventDataDocument(XMLGenerator.java:293)
    at com.adobe.idp.event.content.EventContent.createEventDataXML(EventContent.java:173)
I took the xml from the production service and ran it through the development server, it worked fine.
Any idea as to where to start the troubleshooting?
Cheers,

It would seem that when the LCA we created to be pushed to production, the event template XSD did not get rolled up. So when the LCA was deployed, there was no definition for the event.
What would cause this? Do you have to select another option when creating the LCA? Do you have to re-define the template after the LCA is deployed?
Further information would be greatly appreciated.

Startup scripts for DB in one $OH and AS in another $OH

Hello, I am setting up Oracle Collaboration Suite 10g on a SLES9 SP3 machine. I have used the installers and followed the docs (so I ended up creating oracle users, setting kernel params, modifying limites, etc myself). I am now trying to figure out how to get this setup to start on boot. I found the orarun package but the Oracle Collaboration Suite (OCS) docs seem to recommend against this. I am willing to use it if it works, however. I have also looked at the ocsctl_sample script that is installed in the apps tier, but that doesn't seem to handle starting a db in a different $OH and can not be run by root. I wrote a wrapper to use "su oracle -c cmd" but that didn't work out either.
The setup I have is a database instance in one $ORACLE_HOME, and then the app server and apps in a separate $ORACLE_HOME (infrastructure/OID is on another server). Both of these $OH instances are listed in /etc/oratab of course. Since OCS handles mail it listens on privileged ports (25, 143, etc), so this listener may need to be started by root. I am thinking I only want one opmn instance, one apache instance, and one em instance on the system as well. I read through the init.d/oracle script from the orarun package and it seems like it only looks at the first $OH found in /etc/oratab if the /etc/profile.d/oracle.sh file is not found (I moved it out of the way as I have two scripts I use to set oracle environments depending on whether I'm working on the db or the as).
Has anyone either used orarun or developed other scripts for starting a db instance in one $OH and an app server in another? Any tips?
Thanks in advance,
Chris

Well, the issue is really multiple ORACLE_HOMEs. The single box install of OCS is two, in OCS 9i it was three. There is no problem with it, you just have to set the environment(mr obvious).
As far as having a single EM, you'll have two on your apps box. One for the apps, the other for the DB. Again, no problem because they are on different ports.
So, I guess the simplest explanation is just to write your own script. You can either create a sudoer for the mail listener, or set the setuid bit. There is a note on metalink for starting the mail listener as Oracle user.
The safest way would be to log in as root each time the mail listener needs started, it depends what you can tolerate. You will come across these very same issues if you setup the web cache etc. for reserved ports.
Another issue for automating the startup with your environment, is the fact that it is on two boxes. The processes need started in a particular order, the DB, Infra, then the apps. I don't have a good suggestion for that. You really should have put the DB and infra on one box, and the apps on another.

After the crash...taking down one website and putting up another

I think I have a very strange situation, and don't know if I'm in the right place. Last summer, my hard drive crashed, and somehow I was not able to retrieve iWeb to edit my pages. My website still worked, but when I launched iWeb, it started me out fresh. I even asked the guys at the genius bar (they were helping me retrieve from my backup) and they said it was gone.
I finally (just tonight) had time to redo the entire website. However, now when I try to publish, it says there is an error. I tried publishing to a folder, then going to the folder for the old one, and it won't do it. I don't fully understand the MobileMe, except that 10.4 doesn't need to do anything to switch. I think it thinks I have a website already (which I do) but I am not able to edit that one, and need to get the new one up asap. I would take down the old one if I knew how.
Any thoughts out there? I had Procare, and it ran out right before the crash, and I don't want to go that route again - it's way too distracting. Thanks!

Your site should be stored on your iDisk under Web/Sites and then your site folder with your website name should be there with an index page and then an rss feeds page. To delete, click onto the folder and at the end a circle should appear that if you click on it turns red. Click on this and it will ask you if you wish to delete and click yes and it should delete.
Have you tried deleting iWeb preferences? If not try this by going to User/Library/Preferences and finding the com.apple.iWeb.plist file and deleting it. Run disc repair permissions and then try opening iWeb again and Publishing All and seeing if this works.
A lot of people have had problems with publishing and the thing to do is to keep clicking on publish all repeatedly until it does it.
I take it that you have upgraded from .Mac to MobileMe and that you are running the latest version of iWeb, iLife 08?

Can I clone one Mac and restore to another?

My wife has a 2005 17" CD MBP running Tiger which has seen better days and will probably soon give up the ghost. As a short term solution I was thinking of making a clone of the hard drive and restoring it onto a spare 2007 15" C2D MBP that we have.
Will this work or will the different chipsets cause problems?
I intend to use superduper as I already have a licence for this but was wondering if the clone that is made is machine specific, or will it not work because of the different chipsets.
If this doesn't work would another option be to load Tiger onto the spare MBP and then use migration assistant to copy?
Thanks in advance.

Looking at http://www.everymac.com/systems/apple/macbook_pro/index-macbookpro.html it seems that the MBPs in the year you provide could boot to 10.4.9 As long as you have it at least at that then you probably stand a reasonable chance. While installations are nominally machine specific, I am not sure how much they are really. I have taken drives from one machine and put them in a similar machine (e.g., Quicksilver 2000 to QS 2002) and had them run for years with no issues appear. The only thing you can do is try, but I'd say it had a good chance of working.

Running Leopard on one partition and Tiger on another partition?

I have recently purchased a family pack of Leopard, and I am reading up on a lot of the posts, here, before I venture the installation on two machines. I intend to install Leopard one machine at a time and give a few weeks between installations.
One machine is a 20" 2.0 Ghz Intel - IMAC Aluminum (August 2007), and the other is a G4 Powerbook 17" 1.67ghz 250GB HD. I will probably install on the IMAC first.
My question concerns the G4 Powerbook 17." I have just purchased a 250gb internal hard drive; however, it has not arrived yet. From time to time, I want to be able to run a few programs in classic....., and to have that available to me in the rare event that I want to look at files formatted for classic programs. Call me old fashion or unable to let go of the past... .in any event, I have some files that may be difficult to convert or some software that I do not want to purchase in OS X because I use those programs so rarely.
Initially, I considered just having an external fire wire drive with Tiger installed on it in which I could boot classic up on the rare occasion.
My new idea has been to partition the internal drive to have 10 gb or so available for Tiger. Has anyone successfully run Leopard on one partition and Tiger on the other partition or do they potentially cause problems for one another? Any suggestions, recommendations or concerns are welcomed.

Works like a champ. I run Panther, Tiger, Leopard, and OS 9 on the G4 w/o problems.
Get a bootable, external HD, partition it into enough volumes to accommodate each machine, and make bootable backups/clones of each machine before upgrading/updating and ensure that each boots that machine and works like the original. That allows you to revert to the previous good state without having to reinstall anything. See these for details:
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html
Once that's finished, review these for upgrading options:
http://discussions.apple.com/thread.jspa?messageID=5757385
http://discussions.apple.com/thread.jspa?messageID=5666369
http://discussions.apple.com/thread.jspa?messageID=5646414

Look at drafts on one server and publish on another

Similar Messages

Maybe you are looking for