Look up x & y values in a table and output the corresponding number?

I'm trying to take a temperature input and an elevation input from the FP and find the corresponding number in a table. For example, if I had a temp of 15 degrees and the elevation is 900 feet the resulting output would be 1325. I've looked a several examples of lookup tables and arrays in the forum, but none of them look like they would be useful for what I'm wanting to do or atleast I can't figure out how I could use them. I'm sure it isn't too complicated, but I've only gotten as far as my lacking experience can get me. Any help with this would be greatly appreciated.
Thanks!
Attachments:
Takeoff Distance FP.jpg ‏41 KB

I assume that your temperature and altitude values are assigned as the column and row headers on the table. If that is the case you can use a property nodes to read column and row headers/names. Search each of these arrays for the desired value. Your search will give you the row and column indices you need to index the 2D array for the value.
I have attched a very basic example. You will need to put logic in to determine what to do if you do not have an exact match.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot
Attachments:
Table Lookup.vi ‏9 KB

Similar Messages

Compare String in a table and insert the common values into a New table

Hi all,
Anyone has idea on how to compare a string value in a table.
I have a Students Table with Student_id and Student_Subject_list columns as below.
create table Students( Student_id number,
Student_Subject_list varchar2(2000)
INSERT INTO Students VALUES (1,'Math,Science,Arts,Music,Computers,Law,Business,Social,Language arts,History');
INSERT INTO Students VALUES (2,'Math,Law,Business,Social,Language arts,History,Biotechnology,communication');
INSERT INTO Students VALUES (3,'History,Spanish,French,Langage arts');
INSERT INTO Students VALUES (4,'History,Maths,Science,Chemistry,English,Reading');
INSERT INTO Students VALUES (5,'Math,Science,Arts,Music,Computer Programming,Language arts,History');
INSERT INTO Students VALUES (6,'Finance,Stocks');
output
Student_id     Student_Subject_list
1     Math,Science,Arts,Music,Computers,Law,Business,Social,Language arts,History
2     Math,Law,Business,Social,Language arts,History,Biotechnology,communication
3     History,Spanish,French,Langage arts
4     History,Maths,Science,Chemistry,English,Reading
5     Math,Science,Arts,Music,Computer Programming,Language arts,History
6     Finance,Stocks
I need help or some suggestion in write a query which can compare each row string value of Student_Subject_list columns and insert the
common subjects into a new table(Matched_Subjects).The second table should have the below colums and data.
create table Matched_Subjects(Student_id number,
Matching_studesnt_id Number,
Matched_Student_Subject varchar2(2000)
INSERT INTO Matched_Subjects VALUES (1,2,'Math,Law,Business,Social,Language arts,History');
INSERT INTO Matched_Subjects VALUES (1,3,'History,Langage arts');
INSERT INTO Matched_Subjects VALUES (1,4,'History,Maths,Science');
INSERT INTO Matched_Subjects VALUES (1,5,'Math,Science,Arts,Music,Language arts,History');
INSERT INTO Matched_Subjects VALUES (2,3,'History,Langage arts');
INSERT INTO Matched_Subjects VALUES (2,4,'History,Maths');
INSERT INTO Matched_Subjects VALUES (2,5,'Math,Language arts,History');
INSERT INTO Matched_Subjects VALUES (3,4,'History');
INSERT INTO Matched_Subjects VALUES (3,5,'Language arts,History');
INSERT INTO Matched_Subjects VALUES (4,5,'Math,Science');
output:
Student_id      Match_Student_id     Matched_Student_Subject
1     2     Math,Law,Business,Social,Language arts,History
1     3     History,Langage arts
1     4     History,Maths,Science
1     5     Math,Science,Arts,Music,Language arts,History
2     3     History,Langage arts
2     4     History,Maths
2     5     Math,Language arts,History
3     4     History
3     5     Language arts,History
4     5     Math,Science
any help will be appreciated.
Thanks.
Edited by: user7988 on Sep 25, 2011 8:45 AM

user7988 wrote:
Is there an alternate approach to this without using xmlagg/xmlelement What Oracle version are you using? In 11.2 you can use LISTAGG:
insert
into Matched_Subjects
with t as (
             select student_id,
                     column_value l,
                     regexp_substr(student_subject_list,'[^,]+',1,column_value) subject
               from students,
                     table(
                           cast(
                                multiset(
                                         select level
                                           from dual
                                           connect by level <= length(regexp_replace(student_subject_list || ',','[^,]'))
                                as sys.OdciNumberList
select t1.student_id,
          t2.student_id,
          listagg(t1.subject,',') within group(order by t1.l)
    from t t1,
          t t2
    where t1.student_id < t2.student_id
      and t1.subject = t2.subject
    group by t1.student_id,
             t2.student_id
STUDENT_ID MATCHING_STUDESNT_ID MATCHED_STUDENT_SUBJECT
         1                    2 Math,Law,Business,Social,Language arts,History
         1                    3 Language arts,History
         1                    4 Science,History
         1                    5 Math,Science,Arts,Music,Language arts,History
         2                    3 Language arts,History
         2                    4 History
         2                    5 Math,Language arts,History
         3                    4 History
         3                    5 History,Language arts
         4                    5 History,Science
10 rows selected.
SQL> Prior to 11.2 you can create your own string aggregation function STRAGG - there are plenty of example on this forum. Or use hierarchical query:
insert
into Matched_Subjects
with t1 as (
              select student_id,
                      column_value l,
                      regexp_substr(student_subject_list,'[^,]+',1,column_value) subject
                from students,
                      table(
                            cast(
                                 multiset(
                                          select level
                                            from dual
                                            connect by level <= length(regexp_replace(student_subject_list || ',','[^,]'))
                                 as sys.OdciNumberList
       t2 as (
              select t1.student_id student_id1,
                      t2.student_id student_id2,
                      t1.subject,
                      row_number() over(partition by t1.student_id,t2.student_id order by t1.l) rn
                from t1,
                      t1 t2
                where t1.student_id < t2.student_id
                  and t1.subject = t2.subject
select student_id1,
          student_id2,
          ltrim(sys_connect_by_path(subject,','),',') MATCHED_STUDENT_SUBJECT
    from t2
    where connect_by_isleaf = 1
    start with rn = 1
    connect by student_id1 = prior student_id1
           and student_id2 = prior student_id2
           and rn = prior rn + 1
STUDENT_ID MATCHING_STUDESNT_ID MATCHED_STUDENT_SUBJECT
         1                    2 Math,Law,Business,Social,Language arts,History
         1                    3 Language arts,History
         1                    4 Science,History
         1                    5 Math,Science,Arts,Music,Language arts,History
         2                    3 Language arts,History
         2                    4 History
         2                    5 Math,Language arts,History
         3                    4 History
         3                    5 History,Language arts
         4                    5 History,Science
10 rows selected.SY.

How to assign Values to nested table and pass as parameter to procedure?

How to assign Values to nested table and pass as parameter to procedure?
Below is the Object and its type
create or replace type test_object1 as object
val1 varchar2(50),
val2 varchar2(50),
     val3 varchar2(50)
create or replace type test_type1 is table of test_object1;
create or replace type test_object2 as object
val1 varchar2(50),
val2 varchar2(50),
     val3 varchar2(50)
create or replace type test_type2 is table of test_object2;
GRANT ALL ON test_object1 TO PUBLIC;
GRANT ALL ON test_type1 TO PUBLIC;
GRANT ALL ON test_object2 TO PUBLIC;
GRANT ALL ON test_type2 TO PUBLIC;
here is the table made of object type:
create table test_object_tpe
sl_num NUMBER,
description VARCHAR2(100),
main_val1 test_type1,
main_val2 test_type2
NESTED TABLE main_val1 STORE AS tot1
NESTED TABLE main_val2 STORE AS tot2;
here is the procedure which inserts values into nested table:
PROCEDURE INSERT_TEST_DATA(sl_num IN NUMBER,
description IN VARCHAR2,
p_main_val1 IN test_type1,
p_main_val2 IN test_type2
IS
BEGIN
FOR rec in p_main_val1.first..p_main_val1.last
LOOP
INSERT INTO xxdl.test_object_tpe
sl_num,
description,
main_val1,
main_val2
VALUES
sl_num
,description
,test_type1 (test_object1(
p_main_val1(rec).val1,
                                   p_main_val1(rec).val2,
p_main_val1(rec).val3
,test_type2 (test_object2( p_main_val2(rec).val1,
                    p_main_val2(rec).val2,
                    p_main_val2(rec).val3
END LOOP;
commit;
END INSERT_TEST_DATA;
here is the anonymoys block which assigns values to the object type and pass values into the procedure:
set serveroutput on;
declare
p_sl_num NUMBER := 1001;
p_description VARCHAR2(50) := 'Testing Val1';
inval1 test_type1 := test_type1();
inval2 test_type2 := test_type2();
begin
inval1(1).val1 := 'testx1';
inval1(1).val2 := 'testx2';
inval1(1).val3 := 'testx3';
inval2(1).val1 := 'testy1';
inval2(1).val2 := 'testy2';
inval2(1).val3 := 'testy3';
CSI_PKG.INSERT_TEST_DATA(sl_num => p_sl_num,
description => p_description,
p_main_val1 => inval1,
p_main_val2 => inval2
end;
Can anybody correct me.
Thanks,
Lavan

Thanks for posting the DDL and sample code but whenever you post provide your 4 digit Oracle version (result of SELECT * FROM V$VERSION).
>
How to assign Values to nested table and pass as parameter to procedure?
>
Well you are doing almost everything wrong that could be done wrong.
Here is code that works to insert data into your table (the procedure isn't even needed).
declare
p_sl_num NUMBER := 1001;
p_description VARCHAR2(50) := 'Testing Val1';
inval1 test_type1 := test_type1();
inval2 test_type2 := test_type2();
begin
inval1.extend();
inval1(1) := test_object1('testx1', 'testx2', 'testx3');
inval2.extend();
inval2(1) := test_object2('testy1', 'testy2', 'testy3');
INSERT INTO test_object_tpe
sl_num,
description,
main_val1,
main_val2
VALUES
(p_sl_num, p_description, inval1, inval2);
commit;
end;
/See Example 5-15 Referencing a Nested Table Element in Chap 5 Using PL/SQL Collections and Records in the PL/SQL doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/collections.htm#CJABEBEA
1. You don't even need the procedure since all it does is a simple INSERT into the table which you can do directly (see my code above)
inval1(1).val1 := 'testx1';There is no element one (1) of 'inval1' since you haven't created any elements yet. You need to EXTEND the collection to add an element
inval1.extend();And then there is an empty element but 'inval1' is a container for objects of type 'test_object1' not for scalars like 'val1', 'val2', and 'val3'.
So you can't do
inval1(1).val1 := 'testx1';You have to create an instance of 'test_object1'
inval1(1) := test_object1('testx1', 'testx2', 'testx3');And so on for the other collection
You don't need the procedure (as my sample code shows) but once you populate the variables properly it will work.

How to disable a single cell in a table (and not the whole column)

Hi there,
I've got a webdynpro table with a few columns, rows can be created dynamically through a button in the table toolbar.
Depending on the value of a certain cell I have to disable another cell (in the same row).
I tried to manipulate the view in the modifyview but no joy. I also tried to manipulate the attribute property through the coding below:
DATA lv_knttp TYPE knttp.
lo_nd_kostl = wd_context->path_get_node( path = `MULTIVALUES.KOSTL` ).
lo_el_kostl = lo_nd_kostl->get_element( ).
lo_el_kostl->set_attribute_property(
attribute_name = 'LTEXT'
property = lo_el_kostl->e_property-enabled
value = ''
but it disables the whole column!!!! I just need the cell to be disabled (I thought the code above, through the lead selection, would affect a certain cell only - but I was wrong).
Any ideas?
Thanks!!!

Hi,
using cell variants you can do this.,
check this article: [Cell Variants in WDA|http://wiki.sdn.sap.com/wiki/display/WDABAP/WebDynproforABAPCellVariants]
Instead of binding the read only property of table as a whole , just bind the read only property of column group of table., You can do this bu drill down the table and select the required column and bind the read only column.,
then In onAction Event of button .,
loop the table, if condition satisfied set the read only property to true else false.,!!
hope this helps u.,
Thanks & regards,
Kiran

Compare two tables and log the difference

Hi,
I want to compare two tables and log the difference in new table with the fields as (old value,new value, column name). The column name should be the changes value column

Can you show an example?
SELECT Foo.*, Bar.*
FROM Foo
FULL OUTER JOIN
Bar
ON Foo.c1 = Bar.c1
AND Foo.c2 = Bar.c2
AND Foo.cn = Bar.cn
WHERE Foo.key IS NULL
OR Bar.key IS NULL;
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Nsert/Update and Add Column at the same Table and at the "same" Time

Hello,
I want Insert/Update and Add Column at the same Table and at the "same" Time but in different sessions.
Example:
At first the "insert/update" statement:
Insert into TestTable (Testid,Value) values (1,5105);
After that the "add" statement:
Alter table TestTable add TestColumn number;
- sadly now I get the message: ORA-00054: resource busy and acquire with NOWAIT specified
"insert/update" statement:
Insert into TestTable (Testid,Value) values (2,1135);
After that the execute commit.
I don't know when the first session set the commit statement so I want that the DB the "Alter Table..." statement execute if it's possible.
If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.
Thanks for ideas

Well I want to walk in the rain without and umbrella and still stay dry, but it ain't gonna happen.
You can't run a DDL statement against a table with transactions pending. Session 2 has to wait until session commits or rollbacks (or until the session is killed). That's just the way it is.
This makes sense if you think about it. The data dictionary has to be consistent across all sessions. If session 2 was allowed to change the table structure whilst session 1 has a pending transaction then the database is in an inconsistent state. This is easier to see if you consider the reverse situation - the ALTER TABLE statement run by session 2 does a DROP COLUMN TESTID rather than adding a column: now what should happen to session 1's INSERT statement? You have retrospectively invalidated a statement that was perfectly legal when it was executed.
If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.Fnord.
Cheers, APC

Is there any standard SAP table which stores the license number assigned to a delivery item

Hi Experts,
This is in relation to license number assigned to a delivery item under ‘Export License Log’. Our scenario is for delivery of type NLCC created for an inter-company stock transport order. (i.e.not a sales order case where the license may get copied from sales order to delivery through copy control)
As we understand, for legal control – relevant scenarios, export license for each item shall be determined afresh every time the delivery is accessed. (Depending on legal regulation, grouping, destination country, export control class, delivery partners vis-à-vis license master customer assignments etc.)
To print the license text on one of the delivery output types, we want to access the license number for each item. (determined under export license log)
Our question is: is there any standard SAP table which stores the license number assigned to a delivery item?
We have checked some of the license tables (T606*, VAEX, EMXX etc.) but couldn’t get any specific table storing delivery-item-specific license data.
Helpful answers Text Removed
Regards,
Jagan
Message was edited by: G Lakshmipathi
Dont add such text in your post

Hi Lakshmipathi,
The export control log can be accessed by going to delivery Extras-> Export license log
We need a table that stores the determined license for each item in a delivery document ( as shown in the below screenshot)
Regards,
Jagan

Delete records in a table and at the same time print out for reference

I am working on a req to delete some records from a table and at the same time, record/print the deleted records in the outstream (DBMS_OUTPUT.PUT_LINE)
DECLARE
v_rec_po hst_po%ROWTYPE;
BEGIN
DELETE FROM hst_po po
WHERE abbrpoid = '&opportunity_code'
AND updatedby = (SELECT employeeid
FROM tes_employee
WHERE name = &emp_name)
AND audittimestamp BETWEEN TO_DATE ('&start_timestamp',
'DD-MON-YYYY HH24:MI'
AND TO_DATE ('&end_timestamp',
'DD-MON-YYYY HH24:MI'
END;
I was thinking of using returning into and then using DBMS_output to pull out the delted records, but there will be multiple rows deleted fro this statements. I am stuck here..Can anyone help

How about:
SQL> create table t
2 (x int)
3 /
Table created.
SQL> insert into t
2 select rownum
3    from all_objects
4   where rownum <= 10
5 /
10 rows created.
SQL> declare
2     cnt pls_integer;
3 begin
4     delete from t;
5     cnt := sql%rowcount;
6     dbms_output.put_line ('Removed: '||to_Char (cnt));
7 end;
8 /
Removed: 10
PL/SQL procedure successfully completed.Edited by: Alex Nuijten on Jun 4, 2009 8:58 AM

VT01N User exit for adding additional field to VTTP table and populate the

Hi,
Can any one sujjest what is the use exit/bapi when we add(append) a custom field to vttp table to populate the incremental number based on ship to address when we create a shipment..
need user exit in ...............to populate data to vttp table custom field when we append......

hi,
check these exits for vt01n.
Transaction Code - VT01N                    Create Shipment
Enhancement/ Business Add-in            Description
Enhancement
V56USVDP                                Preparation for updating new objects for transport?
V56USVDO                                Update new objects for transport
V56USTAT                                User-individual definition of transportation planning status
V56UNUMB                                Shipment number allocation
V56UDLUP                                Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UCHCO                                Check shipments are complete
V56UCHCH                                Shipment processing: Check whether changes were made
V56TDLIF                                Filter Delivery Items for Shipment
V56SLDET                                Shipment processing: Leg determination
V56MVT04                                Extensions for Collective Processing of Shipments
V56LOCID                                Shipment Processing: Determine Location Identification
MV56AINI                                Initialization of transaction control for transportation
V56AFCCH                                Shipment processing: Check function code allowed
V56AGTAR                                User Exit for Filtering Shipping Unit Calculation
V56ARCHV                                Customer-spec. checks for archiving shipments
V56ATKTX                                Change the number of lines for text input in shipment
V56BMOD                                 Transportation processing: Field modification
V56DISTZ                                Shipment Processing: Determine Distance
V56FCOPY                                Shipment processing: Copy delivery data
V56FSTAT                                Shipment processing: Activities when setting a status
V56L0001                                Status of Shipments for a Delivery
V56LDELI                                Read Delivery Data for Shipment Processing
Business Add-in
BADI_LE_SHIPMENT                        BadI: Shipment Processing
BADI_V56N                               User Exit for Message Determination: Shipment

Question on Creating table from another table and copying the partition str

Dear All,
I want to know whether is there any way where we can create a table using another table and have the partitions of the new table to be exactly like the used table.
Like
CREATE TABLE TEST AS SELECT * FROM TEMP;
The table TEMP is having range and hash partitions.
Is there any way when we use the above command, we get the table partitions of TEMP to be copied to the new table TEST.
Appreciate your suggestions on this one.
Thanks,
Madhu K.

may this answer your question...
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:595568200346856483
Ravi Kumar

Script to compare 2 tables and retrieve the differences in records data

Dear All,
please I need a script to compare two oracle database tables and retrieves the differences in data records between the two tables.
I have tried this one :
-- all rows that are in T1 but not in T2
(select * from T1 minus select * from T2)
union all
-- all rows that are in T2 but not in T1
(select * from T2 minus select * from T1);
But it generates the following error:
ORA-01789: query block has incorrect number of result columns
Thank you for your cooperation , please it is urgent

ok I used this statement with dblink, the problem is that i cannot use PL/SQL developer since it is a process repeated for 300 tables , that why i am trying to automate it:
-- all rows that are in T1 but not in T2
(select * from schema.T1minus select * from T2@dblink_name)
union all
-- all rows that are in T2 but not in T1
(select * from T2@dblink_name minus select * from schema.T1);
I created the db link on a database A and when i run the statement
(select * from schema.T1minus select * from T2@dblink_name)
on the database B i get the error ORA-02019: CONNECTION DESCRIPTION FOR REMOTE DATABASE NOT FOUND.
DOes anybody have an idea please

I need help with my ipod touch 4, i hit it on my table and now the touch screen doesn't work at all

i got mad and hit my ipod agaisnt the table and now the touch part of the screen doesn't work i need help, i don't want to send it to Apple because i have music that i downloaded for free and i'm worried all my songs, pics, videos will go away if i send it to them.

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Maybe just a loose connection they can fix.
Apple Retail Store - Genius Bar
Here is how to get your media off the iPod.
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

HT1430 I have tried the hold the buttons down until it goes off and all that so how could I fix it.? It looks regular but I can't touch it and slide the slider or anything like that

I have tried the hold the buttons down until it goes off and all that so how could I fix it.? It looks regular but I can't touch it and slide the slider or anything like that

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How to force BI Server to pick from the Agg table and not the Fact table?

Hi All,
I have 3 tables as the Sources in the Key measures. 2 are fact tables and the other one is the agg table.
E.g.
Fact 1 at A,B,C,D and E level
Fact 2 at A,B,C level
Agg at A,B,C level which contains the measures from the Fact1 and Fact2
So when I select the measures from the Agg which are coming from Fact1 the Agg table get fired and when I select measures from Agg which are coming from Fact2, the Fact2 table gets fired in the SQL Query.
Now my question here is there anyway to tell BI Server that when I select Fact2 measures fire the Agg table and not the Fact2 table. The reason being the Agg and Fact2 tables are at the same level.
But I need to keep the Agg table as it is one level higher than the Fact1 tables.
Any pointers would be helpful.

hi,
you explain us your situation really good.but you forgot to tell us the most import,the measures in aggregate table and the aggregated dimensions.
meaning,you have 7 measures aggregated in some levels of your dimensions tables?if yes,there is no possibility Bi goes anywhere else..(by choosing only these measures and the defined levels at your dimensions..)
One more thing,if you choose a combination of your 2 fact data sources,bi goes?where???
hope i helped...
http://greekoraclebi.blogspot.com/

How do I use the value of a table attribute outside the table?

I have two tables that are master detail. But it might not be so obvious to the user before he knows how the page works that they are master detail. The tables are in separate showDetailItems in a panelAccordion and what I was thinking of was to show the value of one coloum in the selected row in the master in the text in the showdetail item that contains the detail table. But I can´t find the right expression to put into the accordion. How should the expression look like to get the value of an attribute in a table for use outside the table?

Thanks for the suggestion but it doesn´t work. The first problem is that the page turns blank when I use that expression for the text in the showDetailItem and the second problem is that I don´t seem to be able to use the master table as a partial trigger. When I click edit in the partial trigger property I can´t shuttle the master table over to be a partial trigger to the showDetailItem even if the table has an id.
Edited by: Atlantic Viking on Apr 2, 2009 6:24 AM
Well I figured out how to come half way. I did the following things:
1) Created an attribute value binding to the attribute I wanted to be shown in the showDetailItem
2) Set the text property in the showDetailItem to this attribute value like this #{binding.attributeValue}
To solve the problem I had with the partial triggers I continued like this
3) Gave other components on the path from the showDetailItem to the master table id´s
4) Clicked edit on the partial trigger property on the showDetailItem and was now able to shuttle the master table over to be a partial trigger.
But I now got an other problem which looks like a bug. At first when I enter the page it looks fine but when I change focus in the master table to another row part of the showDetailItem containing the detail table disapears. The detail table still remains and works as it should but the part containing the text I tried to set above disapears and the text in the showDetailItem containing the master gets replaced by the text that was supposed to be in the showDetailItem containing the detail table. Any suggestions how to correct this are very welcome.
Edited by: Atlantic Viking on Apr 2, 2009 6:59 AM

Look up x & y values in a table and output the corresponding number?

Similar Messages

Maybe you are looking for