Looking for an add in to separate classes in distinct files

I'm working on a old program. .cs files are used to store multiples classes.
Do you know a visual studio extension able to split multiple classes .cs files in separate files ?
Tanks for help
Laurent

Hi Laurent,
Maybe the re-sharper is what you want to get.
Reference:
http://stackoverflow.com/questions/2652901/text-manipulation-split-classes-in-a-single-file-into-mulitple-files
In addition, since it is not the VS IDE usage issue, I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

I have a cooliris wall embedded in a website I built. IE shows it but Foxfire doesn't. I've looked for an add-on but the cooliris one goes to its own wall. I updated to ff4 but no difference. Is there a plug in I need?

I have a cooliris wall embedded in a website I built. IE shows it but Foxfire doesn't. I've looked for an add-on but the cooliris one goes to its own wall. I updated to ff4 but no difference.

I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow. I try bridge mode but the internet doesn't work.
You building supplied internet is a cheap service that is without proper routable addresses..
Therefore to use more than one IP you MUST have double NAT.. sorry there is no choice..
Slow that is because you are sharing internet with every other person in the building.. get your own broadband service.
Bridge will not work.. it cannot work because the building only has private IP addressing. And they only give you a single address.
You can put a password on the wireless.. go to the airport utility and put in a password.
Other than that I don't understand what password you expect.
Can I get an explanation of what bridge mode is?
No NAT.. means the TC becomes a dumb Wireless AP and switch.. works fine with a cable modem router.. or any broadband router but useless with your building system.
Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting?
Double NAT, and set your own wireless names. There is no alternative.. sorry.

Looking for Rental add-on that can handle flexible return dates

Hi Forum,
I am wondering which would be good add-on for rental industry that can handle flexible return dates (without cancelling original contract and creating a new one with actual date).
I am wondering if Visnova's Rental add-on would handle flexible return dates without actually cancelling original contract and creating a new contract.
Are there many ways to handle flexible rental return dates?
Thanks.

Hi,
I have moved your thread here because you are looking for partner add-on instead of SAP add-on. Have you searched through this forum and SAP EcoHub ?
Thanks,
Gordon

We are currently looking for a way to link images to a design file within programs like InDesign and Illustrator using an HTML link instead of a local file. We are hosting our images in SharePoint and need the design file to retain it's links, no matter

We are currently looking for a way to link images to a design file within programs like InDesign and Illustrator using an HTML link instead of a local file. We are hosting our images in SharePoint and need the design file to retain it's links, no matter who on our network opens the design file.

The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Listen for an events for Swing objects in a separate class?

Hi all, sorry if this is in the wrong section of the forum but since this is a problem I am having with a Swing based project I thought i'd come here for help. Essentially i have nested panels in separate classes for the sake of clarity and to follow the ideas of OO based development. I have JPanels that have buttons and other components that will trigger events. I wish for these events to effect other panels, in the Hierachy of my program:
MainFrame(MainPanel(LeftPanel, RightPanel, CanvasPanel))
Sorry I couldnt indent to show the hierarchy. Here LeftPanel, RightPanel and CanvasPanel are objects that are created in the MainPanel. For example i want an event to trigger a method in another class e.g. LeftPanel has a button that will call a method in CanvasPanel. I have tried creating an EventListner in the MainPanel that would determine the source and then send off a method to the relevant class, but the only listeners that respond are the ones relevant to the components of class. Can I have events that will be listened to over the complete scope of the program? or is there another way to have a component that can call a method in the class that as an object, it has been created in.
Just as an example LeftPanel has a component to select the paint tool (its a simple drawing program) that will change a color attribute in the CanvasPanel object. Of course I realize i could have one massive Class with everything declared in it, but I'd rather learn if it is possible to do it this way!
Thanks in advance for any help you can offer
Lawrence
Edited by: insertjokehere on Apr 15, 2008 12:24 PM

Thanks for the response, ive added ActionListneres in the class where the component is, and in an external class. The Listeners work inside the class, but not in the external class
import java.awt.event.ActionEvent;
import javax.swing.*;
import java.awt.*;
import java.awt.event.ActionListener;
public class LeftPanel extends JPanel implements ActionListener {
    /* Constructing JButtons, null until usage of the constructor */
    JButton pencilBut;
    JButton eraserBut;
    JButton textBut;
    JButton copyBut;
    JButton ssincBut;
    JButton ssdecBut;
    ActionListener a = new ActionListener() {
        public void actionPerformed(ActionEvent e) {
            System.out.print("\nNot supported yet.");
    /* The Top Panel contains the title of program */
    public LeftPanel(Dimension d){
        /* Sets up the layout for the Panel */
        BoxLayout blo = new BoxLayout(this,BoxLayout.Y_AXIS);
        this.setLayout(blo);
        /* Sets Up the Appearance of the Panel */
        this.setMinimumSize(d);
        this.setBackground(Color.RED);
        this.setBorder(BorderFactory.createLineBorder(Color.BLACK, 1));
        /* Pencil Tool */
        pencilBut = new JButton("Pencil");
        pencilBut.setAlignmentX(Component.CENTER_ALIGNMENT);
        pencilBut.setActionCommand("pencil");
        pencilBut.addActionListener(a);
        this.add(pencilBut);
        /* Eraser Tool */
        eraserBut = new JButton("Eraser");
        eraserBut.setAlignmentX(Component.CENTER_ALIGNMENT);
        eraserBut.addActionListener(a);
        this.add(eraserBut);
        /* Text Tool */
        textBut = new JButton("Text");
        textBut.setAlignmentX(Component.CENTER_ALIGNMENT);
        textBut.addActionListener(a);
        this.add(textBut);
        /* Copy Previous Page */
        copyBut = new JButton("Copy Page");
        copyBut.setAlignmentX(Component.CENTER_ALIGNMENT);
        copyBut.addActionListener(a);
        this.add(copyBut);
        /* Stroke Size Increase */
        ssincBut = new JButton("Inc");
        ssincBut.setAlignmentX(Component.CENTER_ALIGNMENT);
        ssincBut.addActionListener(a);
        this.add(ssincBut);
        /* Stroke Size Decrease */
        ssdecBut = new JButton("Dec");
        ssdecBut.setAlignmentX(Component.CENTER_ALIGNMENT);
        ssdecBut.addActionListener(a);
        this.add(ssdecBut);
        System.out.print("\nLeftPanel Completed");
    public void actionPerformed(ActionEvent e) {
        System.out.print("\nAction Performed");
    }But this is not picked up in my external class here
import java.awt.event.ActionEvent;
import javax.swing.*;
import java.awt.*;
import java.awt.event.ActionListener;
public class MainPanel extends JPanel implements ActionListener {
    /* Creates a new the main JPanel that is used in the FlipBookFrame to contain all of the elements */
    public MainPanel(){
        /* TopPanel constraints*/
        tpcs.gridx = 1;
        tpcs.gridy = 0;
        tpcs.gridwidth = 1;
        tpcs.gridheight = 1;
        tpcs.fill = GridBagConstraints.BOTH;
        tpcs.weightx = 0.0;
        tpcs.weighty = 1.0;
        /* LeftPanel Constraints*/
        lpcs.gridx = 0;
        lpcs.gridy = 0;
        lpcs.gridwidth = 1;
        lpcs.gridheight = 3;
        lpcs.fill = GridBagConstraints.BOTH;
        lpcs.weightx = 1.0;
        lpcs.weighty = 1.0;
        /* CentrePanel Constraints*/
        cpcs.gridx = 1;
        cpcs.gridy = 1;
        cpcs.gridwidth = 1;
        cpcs.gridheight = 1;
        cpcs.fill = GridBagConstraints.NONE;
        cpcs.weightx = 0.0;
        cpcs.weighty = 0.0;
        /* RightPanel Constraints*/
        rpcs.gridx = 2;
        rpcs.gridy = 0;
        rpcs.gridwidth = 1;
        rpcs.gridheight = 3;
        rpcs.fill = GridBagConstraints.BOTH;
        rpcs.weightx = 1.0;
        rpcs.weighty = 1.0;
        /* BottomPanel Constraints*/
        bpcs.gridx = 1;
        bpcs.gridy = 2;
        bpcs.gridwidth = 1;
        bpcs.gridheight = 1;
        bpcs.fill = GridBagConstraints.BOTH;
        bpcs.weightx = 0.0;
        bpcs.weighty = 1.0;
        this.setLayout(gblo);   //Sets the Layout of the panel to a GridBagLayout
        this.add(tp, tpcs); //Adds the TopPanel to the MainPanel using the TopPanel layout
        this.add(lp, lpcs); //Adds the LeftPanel to the MainPanel using the LeftPanel layout
        this.add(cp, cpcs); //Adds the CanvasPanel to the MainPanel using the CanvasPanel layout
        this.add(rp, rpcs); //Adds the RightPanel to the MainPanel using the RightPanel layout
        this.add(bp, bpcs); //Adds the BottomPanel to the MainPanel using the BottomPanel layout
        gblo.layoutContainer(this); //Lays Out the Container
    public PanelSizes getPanelSizes(){
        return ps;
    public void actionPerformed(ActionEvent e) {
        System.out.print("\nExternal Class finds event!");
        /*String command = e.getActionCommand();
        if (command.equals("pencil")){
            System.out.print("\nYESSSSSSSSSSSSSSSSSSSSS!");
    /* Create of objects using the PanelSizes funtions for defining the */
    PanelSizes ps = new PanelSizes();   //Creates a new PanelSizes object for sizing the panel
    CanvasPanel cp = new CanvasPanel(ps.getCentrePanelDimension()); //Creates a new Canvas Panel
    TopPanel tp = new TopPanel(ps.getHorizontalPanelDimension()); //Creates the TopPanel
    BottomPanel bp = new BottomPanel(ps.getHorizontalPanelDimension()); //Creates the BottomPanel
    LeftPanel lp = new LeftPanel(ps.getVerticalPanelDimension()); //Creates the LeftPanel
    RightPanel rp = new RightPanel(ps.getVerticalPanelDimension());   //Creates the RightPanel
    /* I have chosen to create individual constraints for each panel to allow for adding of all
     components a the end of the constructor. This will use slightly more memory but gives clarity
     in the code */
    GridBagConstraints cpcs = new GridBagConstraints();
    GridBagConstraints tpcs = new GridBagConstraints();
    GridBagConstraints bpcs = new GridBagConstraints();
    GridBagConstraints lpcs = new GridBagConstraints();
    GridBagConstraints rpcs = new GridBagConstraints();
    GridBagLayout gblo = new GridBagLayout();
}Any help will be greatly appreciated :-)

Looking for best practice sending args to classes

Unfortunately, I'm stuck in a company that only employs MS developers, so I'm kind of stranded with no buddies to mentor my java skills... so thanks in advance for any help, I appreciate it.
Anyway, I think that I've been doing things the hard way for a while and I'm looking for some sort of best practice to start using. I'm currently working on a GUI that will take all the selections, via combo boxes, text fields, etc., and send them to a class (a web bot, actually) and run it.
I'm starting to run into the problem of having too many arguments to send to my Bot class. What's a good way that I should be doing this? I figure I can do it a couple of ways, right?
new Bot(arg1, arg2, ......... argX);
Bot bot = new Bot();
bot.setArg1("something");
bot.setArg2("something");
etc..
bot.run();Or, is there a better way? Can I package all the args in a collection somehow?? That way I only have 1 argument to send... I don't know... Thanks for the help.

Create a class "Data" (for example) that encapsulates all the data you want to pass to the Bot class. Then create an instance of the Data class and set all the relevant fields (i.e. setArg1 etc). Now you pass this Data instance to your Bot class. This way you only have to pass one Object around and you've encapsulated all your data.

Looking for a program to delete CVCs from a flat file, infocube, ztable.

I am looking for a program that will delete CVCs from a flat file, infocube, or ztable. Based on the research I have done, I would imagine the core of such a program would be the use of function module /sapapo/ts_plob_delete.
If anyone has such a program and would be willing to share it that would be great.
Shane

Hi
Yes you can use this program, but I think the program /sapapo/ts_plob_delete will only delete the data from Master planning Object structure( MPOS). First you have to deactivate the planning are first than use this program which will delete everything and again activate the planning area.
If you want to delete the data flat files or infocube, you require to delete the data directly from the infocubes and add this job in the process chain to delete everything.
I hope this information help you.
Thanks
Amol

Looking for a way to write a BufferedImage to a file

i am currently working with images and transforming them. the image is stored as a BufferedImage object and i was wondering if anybody knows how to write the image back as a new file after its been modified.
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.ImageIcon;
import javax.swing.JSlider;
import javax.swing.event.ChangeListener;
import java.awt.Graphics;
import java.awt.Image;
import java.awt.BorderLayout;
import java.awt.image.BufferedImage;
public class ExampleFramework extends JPanel {
private BufferedImage originalImage;
private BufferedImage filteredImage;
private JSlider slide = new JSlider(1, 50, 25);
private int height, width;
ExampleFramework(String titlebar) {
createBufferedImages();
setUpJFrame(titlebar);
private void createBufferedImages() {
Image image =
new ImageIcon("test.jpg").getImage();
height = image.getHeight(null);
width = image.getWidth(null);
originalImage =
new BufferedImage(width, height,
BufferedImage.TYPE_INT_RGB);
filteredImage = new BufferedImage(width, height,
BufferedImage.TYPE_INT_RGB);
Graphics g = originalImage.createGraphics();
g.drawImage(image, 0, 0, null);
g.dispose();
this class is not complete but it should give you an idea of the problem am having. there are 2 buffered images and all am looking for is a way to write the contents of the bufferedimage to a file

First, I get rid of Image:
private void createBufferedImages() {
    BufferedImage image = ImageIO.read(new File("test.jpg"));
    int targetType = BufferedImage.TYPE_INT_RGB;
    originalImage = convertType(image, targetType);
    filteredImage = new BufferedImage(image.getWidth(), image.getHeight(), targetType);
static BufferedImage convertType(BufferedImage src, int targetType) {
    if (src.getType() == targetType)
        return src;
    BufferedImage tgt = new BufferedImage(src.getWidth(), src.getHeight(), targetType);
    Graphics2D g = tgt.creategraphics();
    g.drawRenderedImage(src, null);
    g.dispose();
    return tgt;
}(I don't know how important type RGB is to you, so I put in a convert routine.
If these images are primarily for viewing, I would make them compatible
with the screen by using method createCompatibleImage.
As for writing an image, it can be one line of code:
imageIO.write(bufferedImage, "jpeg", file);See ImageIO[url].

Looking for a Notes app that I can import CSV files into?

As the title says, I'm looking for a good notes application for my iPhone that I can import CSV files into. I have tried both Appigo and Notespark, but I can't easily scroll through them, as I have 2,000+ notes. Is there any app that I can import my notes into and also scroll through quickly? I'd like something that works similarly to how you scroll through songs on the iPhone/iTouch, with the column on the right where you can skip to songs (notes, in this case) that start with a certain letter.
Thanks!

Hi Tx Tar Heel,
I've been using Office2HD: https://itunes.apple.com/us/app/office2-hd/id364361728?mt=8
Its cheaper than Numbers and it also works for Word and PowerPoint files too. I like the Dropbox integration. I can start on my Office docs (Word, Excel, PowerPoint) in the office and then edit those files with Office2HD when I'm out of the office. Files saves right back to Dropbox so that when I get back to the office the files are already updated. Not bad for a $7.99 app!
Hope this helps!
~Joe

Looking for an Add-on for Intercompany Transactions between 2 databases.

Does anybody know of an Add-on for B1 that would provide a solution for Intercompany Transactions between 2 legal entities (2 databases)?

alain
did you try out the intercompany addon by citisys?
and if you are only looking at reporting...you can also explore crystal reports, given the fact that sap offers one user license free with every installation...

I closed then reopened my navigation toolbar using the Alt button. When it re-opened the add-ons(?) that were on it were no longer there. I'm specifically looking for two add-ons that took me to "Major Television channels" and "Minor television channels".

I would be content just to have the add-ons back, the one that allowed me to view ABC, NBC, CBS and a handful of other channels, and the one that connected me to the National Geographic channel and I believe some of the Discovery, etc channels . I can get to the Nat Geo if I go through my history but most of the other channels I can't. I've had MozFire on my computer for a while but mainly used Google Chrome until last week when I decided to check out MozFire. As has happened in the past I found myself really liking this program and wondering why I haven't been using it all along.

I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

I'm looking for an add on that opens a new web page. In prior versions it looked similar to a "+" sign. It is not the "Open a new Window Button" Thank you.

The add on opens a blank new web page. For example, when on a web page, you can open a new page, with all bookmarks on the sidebar.

The add on opens a blank new web page. For example, when on a web page, you can open a new page, with all bookmarks on the sidebar.

Firefox mobile keeps telling me to download add-ons, I need to get FF mobile. But I'm looking for the add-ons on FF mobile. am I missing something still?

sometimes I can dowload add-ons. I've tried switching btw default and android galaxy tab in the prefs but still no go

It sounds like you are using the Phony add-on to change your User-Agent header. It definitely needs to be set to "Default" for the addons.mozilla.org site to work correctly.
After setting User-Agent to "Default", try going to http://addons.mozilla.org/mobile - you were probably redirected to the wrong section of the site if you originally loaded it with a different User-Agent header.

Looking for Help on How To Save Video as Divx File

Can someone help? I have iMoive 4.0.1 and I need to save video clips as a Divx file. I go to the "share" button and try to compress the clip for Quicktime and choose expert settings. This gives me a list of options including Divx AVI. When I choose this option, the file is turned into an .avi file not a .divx file. ANd there is no other Divx choice available. I have talked to another iMovie user (v4.0.1., too) and--the odd thing--on his option list he has Divx (not Divx AVI). So I need assistance in either finding another way to do this with my existing 4.0.1. or finding a plug-in that will allow me to save as a Divx file. Or--if no one can tell me how to do this--let me ask if anyone out there knows whether iMovie HD 5.0 or iMovie 6.0 would allow me to do what I need to do. Thanks.
PowerBook G4 Mac OS X (10.3.9)

Divx isn't a standard option, so you have downloaded some third party support for Divx. Try the latest version.

I am looking for an addon called Informer. used to fill in forms. new computer and can't find it in lists of add ons. thank you

looking for an add on called "Informer". new computer here and i can' t seem to find it anymore on list of addons. it is used to fill in forms and worked well.
thank you [email protected]

Sorry, I don't recall ever seeing an extension by that name. <br />
Maybe this one? <br />
https://addons.mozilla.org/en-US/firefox/addon/informenter/

Looking for an add in to separate classes in distinct files

Similar Messages

Maybe you are looking for