Looking for change BADI in CRMD_ORDER tcode

Hi,
I have a scenario in CRMD_ORDER, when user changes quantity for an existing Sales Order a BADI should trigger. I should do some validations at item level and display error message.
I tried CRM_ORDERADM_I_BADI and CRM_SALES_BADI . they didn't work as needed.
I'm looking for a which should trigger for each and every click of a change BADI. The change can be on any tab.
Thanks,
Lalitha.

Hi Lalitha,
Please take a look at the vision CRMV_FIELDCHECK thru transaction SM30.
Into this vision, you can assign a customized Function Module for a specific field of transaction order.
I hope it helps.
Regards,
Gabriel Santana

Similar Messages

Table to look for change documents for users

Hi friends,
Is there any standard table to look for change documents for a user?change document through SUIM does not give the correct log.
Thanks for you support.

Julius
Looking at another of Tracy's other post (http://scn.sap.com/thread/3598947) she's trying to use ACL. Hence needing to know the tables to write joins/queries to hit tables within ACL
I've seen ACL used and have had the fun experience of Auditors using Google to find tables to perform checks on without context of what has actually been implemented in their particular system.
Regards
Colleen

BAPI   for   change budget in project   -   TCODE   CJ30

Hello   everyone ,
I want to change budget for A project   in tcode   CJ30 ,
bdc IS not suitble ,     the spec is to change one WBS ' s BUDGET money ,
I can't find the way to do it in BAPI    BAPI_PROJECT_MAINTAIN
WHO CAN HELP ME ?

Hi,
I have tried that option already. But I could not find any.
Any update????
Thanx,
Sivagami.R

Looking for "Change Keyboard Type"-Button

Hi. After installing Snow Leopard my Keyboard (from Cherry) works a bit wrong (some keys have wrong characters). I think there is something wrong with identification of the keyboard and wand to change it's type. "Help" (http://docs.info.apple.com/article.html?path=Mac/10.6/en/8962.html) says:
1. Choose Apple menu > System Preferences, and then click Keyboard.
2. Click Change Keyboard Type.
The problem is, that there is no such Button "Change Keyboard Type" in Keyboard Prefs!
So where can I change the type?
Thanks,
JB

Hello Tom,
I'm using two layouts - one is German and one is Russian-PC (Russian layouts are a little different for PCs and Macs). I don't know if it matters, but the system is running in English.
I still believe, that the problem is in keyboard configuration. As I was installing 10.6, system asked me to "Press a button next to the left Shift" to identify, which type of keyboard I use. I didn't understand what the system wants from me and pressed a wrong key (I believe, I tried to press "Escape" but instead pressed the "^" key).
Exactly the same thing happend to me a couple of times as I was installing 10.5.x - this message for Keyboard config is some kind of, I dunno, magic for me (or some poor interface design) - I always miss the point, and I've always pressed the wrong key. But in 10.5. there was a possibility to run keyboard identification once again from "Keyboard" menu (and so says "Help", too). But there is no more this button and I don't know if there were any other way to run identification again. (I've tried to plug-out and plug-in again, but it didn't help).
Thanks for your help, I look forward to try to change layouts.
Jurij

Looking for Exit/Badi for VA03 TC for blocking the sales order

Dear Experts,
I would like to know the user exit/badi for sales order(tc VA03)and program name:SAPMV45A
1)if the minimum order quantity is less than the order quantity.the order will block and in the second line item for the same material they are charging 100$ and then they will release. the existing logic is user dont want this now.
2)If a line item is created below the minimum order quantity, the order should get blocked and the user should get a warning message regarding the addition of ZMOQ condition type [u201C Line item Quantity is less than minimum order quantity, ZMOQ condition type is missing u201C
Please provide the exit name and provide some inputs.
Thanks,
V.V.

Hi Gurus,
I am trying to find out the exit for warning messages where the SAP has maintained.
whenever the salesorder creating if the order quantity is less than the minimum order quantity it will give two warning messages. 1.Take minimum order quantity 400 DEV into account in item 000010
2.Consider delivery unit 40 DEV in item 000010
so i want to add the third warning message for condition type is missing.
I am trying to find the exit in the program SAPMV45A and include names MV45AFZZ and MV45AFZB.
Please let me know if anyone knows the exit name. where the warning messages maintaining.
Thanks
V.V.

BADI for changing product catgory

Hello SRM Experts,
I am looking for an BADI for changing product category.
We use classic scenario with an external catalog. Our supplier delievers us some data. Some of this data are used for statitical reason for example new item matgroup from oci interface.
now I want to determine the product categorie in relation to the delivered new item matgroup.
I have found some BADI to manipulate the Data - but not possible for product category. Thank your for help
Regards Uwe

Hello Yann,
I have activated this BADI already. But I have not managed it to change product category.
Which field of this BADI has to be changed ?
Where do I get the GUID from ?
thank you

BSP Application - Looking For A Parameter

Hello,
I have the following (rather annoying) problem:
We are working with a BSP-Application in which directly in the Beginning (in the "OnCreate"-Method of the entry page) an SAP Memory Parameter is read through a "GET PARAMETER" Statement. The Problem is: Where is it set?
Is there a defined place where such parameters are stored? Or how is this handled normally? After searching the whole BSP-Code there was no "SET PARAMETER" call anywhere, so we have to assume that this happens somewhere outside the BSP-App. Perhaps it's hardcoded somewhere??
Does any of you have an idea, how I should go about this problem?
Thanks in advance,
Lukas

Well the parameter im looking for changes depending on the user that is currently logged in. so it can't be in the urls I think.
This is the snippet of code that checks the parameter:
DATA: lv_parameter(2) TYPE c.
GET PARAMETER ID '/BIC/OMSGLVARPO' FIELD lv_parameter.
its almost at beginning of the bsp app flow.

Looking for Exit or BTE or Badi for Changing amount to posted in F-53

Dear Guru's
I am Looking for Exit or Badi or BTE for F-53 Where I can Change The Amount while clearing the vendor payemnt because My Client Bussiness process is to Cut bank commission on the amount to be posted while making the payment .
Or is there any way Out to meet this requirements.
Thanks and Please do Reply...
Nilesh

Is it solved ? How ???
Glauco

Need BADI for Qty validation on CRMD_ORDER

Hi,
I want to do a validation for qty which is entered on line item for certain item categeries on CRMD_ORDER transaction , and give error message. I want to do this on Create/Change of a sales order.
I'm thinking that we can do this in ORDER_SAVE Badi... but this happens only when user clicks save button. Is there any other BADI where we enter a line item... and BADi triggers and do the validation?
I checked CRM_ORDERADM_I_BADI, but this doesn't trigger when we just change qty for an existing sales order.
Thanks.

Hi
look for badi with schedlin in name.
it should be launched when changing/inserting quantity in item.
Regards
Radek

Need a Exit or BADI For Changing Validation Class (PRUEFKL) during EL28

need to change the Validation Class Validation Class (PRUEFKL) or send it blank in order to remove all valdition during Meter read uplaod , Can any one suggest a BADI or user exit or anything where in i can change the Validtion class before validation take place at the time of meter read uplaod . As validtion class we do not pass in EL28 it usually get filled with 001 ans 002 .
Thanks in advance .
regards
rajeev

Thank for the response however my question was , can we change the Validation Class throght code any exit or BADI during el28 not by config as config will be done for every thing as this we need to do only for a paticlular program .
So in short i m looking for any enhancement point ( Exit /BADI ) which willl trigger during el28 and i will be able to send emply validation class in initial stage to avoide validation .
Regards
Rajeev
Edited by: rajeevkohli on Aug 3, 2011 2:25 PM

EXIT/BADI for ME31L and ME31K for changing Incoterms in header and item

Hi All,
I am facing an issue in ME31L,ME32L transactions.
In vendor master , incoterm is maintained .So whenever a PO is created with particular vendor, the same incoterm(EKKO-INCO1& EKKO-INCO2) will get defaulted into PO as well. Now i need to change the incoterms2 on basis of some logic, but i was not able to find the correct BADI/EXIT to do these changes.
This relation can be seen in vendor master partner profile.
SO if I create a PO/SA with a vendor and goods supplier is different the incoterm from vendor is getting defaulted there, not from goods supplier .
So am looking for any EXIT/BADI which will enable changing of Incoterms2 based on the incoterms1 value.
Thanking you in advance.
satheesh

HI Sharma,
Thank you for your response.
This particular BADI ME_PURCHDOC_POSTED is getting triggered when i am creating a SA in ME31L but when I am changing the values in the BADI that is not getting updated on the screen.
thanks,
satheesh

User exit or Badi for changing the lead time in ATP check in VA01/VA02

Hi All,
Currently, SAP standard functionality takes up the lead times maintained in material master to create the schedule lines in the sales order in VA01. I am looking for some user exiit/Badi/Enhancement point where I can change the lead time. This is somewhat urgent so any help in this regard is appreciated.
Regards,
Sandeep
Edited by: Sandeep Gaitonde on Sep 1, 2011 9:16 PM

Hi Sandeep,
These are the user exits will trigger in va01 .
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Please check this and post .
Regards,
Madhu.

BADI for changing the product cost

Hi All,
My requirement is to change the product cost when the costing engine is running via ck11n or ck40n. Iam looking for user exits and BADI's for this requirement.
I did look into the BADI DATA_EXTENSION_CK but this particular BADI does not have export or changing parameters. Can anyone suggest any user exit or BADI's for this requirement. I also looked into other BADI's like
CK_KALAMATCON2_CI
COSTINGRUN_CK
COST_APPORTION_CK
CO_PROD_COSTING_CK
DYNPRO_EXTENSION_CK
ORDER_COSTING_CK
QUANTITY_STRUCT_CK
SUR_STOCK_TRANSF_CK
VALUATION_CK
But none of them served the purpose. Plz help...Thanks in advance...
Regards,
Nirmal.

Hello,
Will this help?
Product costing with Enhancement (Valuation variant with User Exit)
Cheers,
TD

Badi for changing Stock type in MIGO transaction

Hello ALL,
IS there any BADI or EXIT for changing stock type in MIGO when we are doing GR against PO then we need to change the Stock type to Unrestricted stock.
Please let me know.Awarded if useful.
Regards

hi,
Look into the BADI MB_MIGO_BADI.
or
Exits:
MBCF0009 Filling the storage location field
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0011 Read from RESB and RKPF for print list in MB26
Sirish

Looking UserExit or BADI for Material Group Description

Hi,
I am looking for BADI or User Exit for Material Group Description.
My Scenariio is Whenever the user Enter in to MM01or MM02 in Basic Data 1 view Materail Group Field ,the user press F4 It is displaying material group number and corresponding Description.Those Description are in English because that materail group are created in English Longon Language,but the other language User Enter in to MM01 or MM02 Transaction in the basic data 1 view Press the F4 key for Materail Group it showing only material group number no description is displaying,but my requirement it should translate and show it to the corresponding longon language description when Press F4.Regarding this i maintaining other language description for the existing material group in a ZTable.
The table for Material Grop Description in all the language is T023T table.
Get back to me your valuable suggestion for the above requirement.
Thanks & Regards,
sanjeevkumar

Hi Sanjeev,
If you wanna search for BADIs, you can follow this method:
go to SE80 transaction and select the class/interface CL_EXITHANDLER, then you have to select the Get_Instance method and put a break-point in the following call:
call method cl_exithandler=>get_class_name_by_interface
exporting
instance = instance
importing
class_name = class_name
changing
exit_name = <b>exit_name </b>
exceptions
no_reference = 1
no_interface_reference = 2
no_exit_interface = 3
data_incons_in_exit_managem = 4
class_not_implement_interface = 5
others = 6.
the value of exit_name will give you the name of the BADI that is been call from the transaction. Then you have to execute the transaction MM01 or MM02 and it will stop on each Badi's call.
Regards,
Eric
Reward any helpful answer

Looking for change BADI in CRMD_ORDER tcode

Similar Messages

Maybe you are looking for