Looking for Java3D "Starter's guide" or something....

Is it possible for me to learn Java3D from scratch without spending any money??? :)
If you know how, please tell me where to find such information!
Thanks...

Well I want to do a Java3D related project for school, but is it enough\too much?
I was thinking about a 3d java game or something like that.
I will do anything if I find a good idea for a Java3D project...
I need to know one last thing:
I can (and will) read all this if ill do a Java3D project.
Really, I gonna.
I just don't know if I could complete that whole 240+ pages book in less than six months (+-), and then have enough time to actually create the project!
Please... anyone!
Give me a good java3d project and please say:
"Yes! You could finish reading that book AND finish the actual project in one year!"
Thank you.
I am totaly serious.. I really want this project to be good!
I am willing! :D

Similar Messages

  • Looking for best practice / installation guide for grid agent for RAC

    I am looking for best practice / installation guide for grid agent for RAC, running on windows server.
    Thanks.

    Please refer :
    MOS note Id : [ID 378037.1] -- How To Install Oracle 10g Grid Agent On RAC
    http://repettas.wordpress.com/2007/10/21/how-to-install-oracle-10g-grid-agent-on-rac/
    Regards
    Rajesh

  • Looking for a best-practices guide for developing in TestStand

    I am looking for a best-practices guide for developing in TestStand. LabVIEW has its style guides and books, but there is very little published about TestStand.
    Also, and I mention this since NI checks these entries as well, how about adding TestStand to the NI Developer Zone?
    Thanks in advance for any leads or documents you can provide!

    Thanks! I was stuck on entering "TestStand best practices" into NI's search engine, and never thought of entering "TestStand style guide."
    If anyone knows of additional pertinent content, I would appreciate hearing about it.

  • Looking for Business Scenario Configuration Guide for ECO CRM

    hi,
    I have the SAP E-Commerce for mySAP ERP: Business Scenario Configuration Guide (for ECO). I am looking for the same document for ECO CRM. Does anyone know where I can find this document?
    kind regards
    Michael

    Hi
    Check the following Configuration guides
    C14: CRM E-Commerce available on
    http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
    Hope this helps
    Regards
    Rekha Dadwal

  • Looking for transaction start Workitems in status "waiting"

    Hi everybody,
    we have to test some workflows. There are several Workitems in the WF in status waiting. So we have to do a lot clicks tu run this workitems.
    Is there a transaction to start all or some selected Workitems ?
    Thanks a lot
    Regards
    Mario

    At least I am not aware of any "mass complete wait" functionality (if this is what you are looking for?).
    You could list the work items with SWIA, and then Ctrl+Shift+F12 (=Display work item from menu) -> Edit -> Change -> Complete wait. After first time you don't need the "Edit -> Change" part, so it will be just few clicks. Of course it's still quite annoying if you have hundreds of work items...
    Regards,
    Karri

  • Looking for SAP Leasing Configuration guide

    Hi,
    I am looking for SAP Leasing related configuration/best practices guide.
    Can any one help me on this?
    Thanking you in advance.
    Regards,
    Ram.

    Check:
    http://help.sap.com/bp_profservicev1600/ProfServ_US/HTML/Scenarios/DUB_Scen_EN_US.htm
    http://help.sap.com/bp_profservicev1600/ProfServ_US/Documentation/Scenarios/DUB_Scen_Overview_EN_US.ppt
    http://help.sap.com/content/bestpractices/industry/index.htm
    http://help.sap.com/bp_retail603/Retail_US/HTML/index.htm

  • How to look for New start Called call for a Maintenance plan

    Hi,
    I need to find out all calls for a maintenance plan of scheduling type- 'New Start' and Status- 'Called'. How to find this using tables.
    For 'New Start' scheduling type probably table field and value is MHIS-TERMA = 'N'. There are different statuse in this table but I am not able to identify the status 'called'. Also what is the field MHIS-ZAEHL(Maintenance package number) for?
    Thanks,
    Vimal

    Taken from the standard IP10 program:
    * possible status combinations
    * TSABR - Scheduling status: planned date called
    * TSVBT - Scheduling status: call outstanding
    * TSENQ - Scheduling status: call horizon not reached
    * TSENM - Scheduling status: stopped manually
    * TSTAT - Sceduling status
    * TSABR   TSVBT   TSENQ   TSENM   TSTAT
    *   X       -       -       -       A     called with order
    *   X       -       -       -       -     called without order
    *   -       X       X       -       -     on hold (TSENQ), due (TSVBT)
    *   -       X       X       -       F     on hold, due and fixed
    *   X       -       -       -       X     skipped
    *   -       X       X       X       -     blocked
    *   -       X       X       X       F     blocked
    *   X       -       -       -       -     LRMDT <> 0, completed

  • Looking for a starter keyboard recommendation for use with Garageband

    I've got a new iMac running Lion.  I'm looking for a keyboard that will work with Garageband that I can buy for as little as possible but will work and be decent.  Looking at the Apple Store, I see three that could fit in my price range, the M-Audio Keystation Mini 32, the M-Audio Key Studio 49 USB-Midi, and the Akai Professional LPK25 Laptop. I'd appreciate any feedback about these. 

    Good, good, and good!
    M-Audio in particular makes great "bang for the buck" controllers.
    If you spend more, you get a better physical keyboard, which can be more satisfying to play. But for budget models, hard to beat those, particularly the m-audio.
    good site to check gear out:
    http://www.sweetwater.com/shop/keyboards/keyboard-controllers/

  • Looking for easy to follow guide for building a software updates process.

    I am hoping that I can get some general guidance here. I have responsibility for sccm 2012 in our environment. I also have to do exchange 2010, all Cisco networking and a few other large platforms. Needless to say it gets to difficult to get on a task and
    stay focused for long periods of time. I tend to just sort of keep things running and that's all I usually have time for. 
    We have sccm 2012 and it's mostly used for OSD right now. I have been tasked with developing and implementing a process for critical updates across the organization. We have one primary site and three secondaries with about 2500 machines. There is no history
    of doing updates here other than a previous person who used to do them via WSUS and GPO. But that has not happened for well over a year now.  My problem is that I have no familiarity with doing updates via WSUS or sccm. So it's all pretty new to me. I
    got Kent Agerlunds book and like his detailed approach and was hoping to just sort of adopt that process and tailor it to this environment. 
    I do have WSUS installed in our primary location and the SUP point on our primary and secondary servers. Things seem to be syncing fine. Now I need to try to put together a process that is easy to manage and works.   The biggest problem I find is that
    given I have primary ownership for a wide range of technologies in a company that is not a small mom and pop organization, it is difficult to sit down and get the necessary time to hammer this out. Everytime I sit down to work on this I feel I have to try
    to learn it all over again. For some reason, probably my lack of experience with even WSUS or patching in general, they way this is supposed to work is just not sinking in effectively. 
    Can someone recommend a decent guide that is easy to understand and easy to follow? I find so much material out there on this topic that it gets a bit overwhelming and I spend what time I do have available jumping from document to document and not really
    getting a decent foundation of how this is supposed to work. 
    Also, if anyone cares to chime in how they would maybe approach this task if assigned to them. Imagine and environment that has no software updates in place and basically never did. Machines are very, very outdated. I have disabled automatic updates via
    a GPO ( this was recommended in the Agerlund book). 
    Also, since this is basically a ground zero environment should I have two focuses? One, just getting everything up to date, and then a second process for keeping things up to date?
    I realize this is a really broad info dump that I'm asking for, but I find just googling and trying to figure this out ends up with a scattered bunch of links that I don't really feel help me just get started on the right track.
    Thanks!

    Hi,
    You just need to deploy software updates to specific collections periodically, such as Automatic deployment rules, keep things up to date. Then monitor the status to make sure deployments are successful.
    The following KBs describe how to plan software updates.
    http://technet.microsoft.com/en-us/library/gg712696.aspx
    http://technet.microsoft.com/en-us/library/hh692394.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Look for e-recruiting install guide

    I cannot find the install guide for e-recruiting at SMP.
    I see that ehp3 for ERP has e-recruiting.
    Is ehp3 the only way to have e-recruiting?
    Thanks!

    Hi,
    >
    > 1) In order to bring in e--recruiting , can I apply ehp3 directly without applying any e-recruiting add-on (i.e. baseline) first?
    >
    Depends on which system you want to install E-Recruiting, If it is an ECC system then by default when you will install ECC system then it will come at certain package level and then you can upgrade it to EHP3.
    If you install it on netweaver system then you can directly install it on EHP3 level.
    > 2) You mentioned it's an add-on on ECC/NW. Does it also have some files (e.g. *.sca) to be deployed on EP?
    >
    Yes, you need to deploy certain packages on Portal as well depend upon for which functionality you want to use E-Recruiting application.
    Check below link:
    https://websmp108.sap-ag.de/~sapidp/011000358700003087572006E
    > 3)  In terms of architecture, are e-recruiting, e-sourcing, e-service, ecommerce and e-market are similar?
    >
    In order to look on architecture of e-recruiting, please check below links:
    https://websmp206.sap-ag.de/~sapidb/012006153200000893642007E/Managing_External_Recruiting_ehp3.pdf
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/SAP%20E-Recruiting
    Thanks
    Sunny
    Edited by: Sunny Pahuja on Sep 26, 2010 3:13 PM

  • Looking  for getting started docs of OGG

    Hi All,
    I am new to the OGG . I have hands on experience in ODI .
    I am trying to get started learning OGG.
    Please share any documents to get started with OGG (Developers guide)
    Thanks,
    Yellanki

    Wouldn't everyone?
    You can get the OGG documentation here:
    http://www.oracle.com/technetwork/middleware/goldengate/documentation/index.html
    There really isn't a developer's guide, but you can get a tutorial (based on version 10.4) here:
    http://www.oracle.com/technetwork/middleware/goldengate/learnmore/ogg-tutorial-ora-to-ora-10-4-177139.pdf

  • Looking for a proper guide on creating services

    Hi,
    We're looking into creating our own Enterprise Services using all the capabilities of PI 7.1 and our ERP system (ECC 6.03) . When we create services now we basically create our flow in PI and then expose the start of it as a Service, so you can start it from anywhere (we've mostly done this in Composite Applications and with Adobe Interactive Forms).
    I'm looking for a how-to guide to create your own ES from scratch. Using the official building blocks provided in SAP (instead of creating our own data types) and the creating the proxies, and exposing those as a service.
    We're thinking about a flow to retrieve certain information from the ERP, starting and ending in a Service.
    I've looked through the documentation availible here, skimmed through all the TechEd 08 presentations and exercises but haven't found anything that covers creating a new service. I have however found extensive information on enhancing one, though this is not what I'm looking for.
    Any help would be greatly appreciated,
    Cheers,
    Frederik-Jan

    Hi Frederick,
    You cah check the following links for the step by step creation of web services hope  they are helpful to you in proceeding
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50b63e8f-a4bb-2a10-e9b1-ba803fd06739
      https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f3cf81-e6da-2a10-6891-ef321fdc1a6b
        http://help.sap.com/saphelp_nw70/helpdata/en/44/b7f7e1354135e7e10000000a1553f7/frameset.htm
    Webinar on creating webservice in ABAP environment..
      https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_media&query=creating+webservices&adv=false&sortby=cm_rnd_rankvalue#
    Thanks,
    Ram.

  • Resources or Book for getting started

    I'm trying to get to grips with Extension Builder.  I have fairly simple needs - however they go beyond the ability of Configurator.  I'm comfortable with jsx scripting and configurator, and develop in Delphi - so I'm not a total beginner - although with action script / Extension Builder I am. 
    I'm struggling to find the correct resources to get me started as it's not clear to me exactly what I need to learn.  Should I be looking for a Flashbuilder application guide - or shoudl I be looking for some other book?
    To provide a little more context - I want to create is a menu that's populated when photoshop starts with text from a file.  Looks like the pop-up menu in a panel is the component to do this - but I need to learn how to read the file and populate the menu and assign actions.  The menu items should then call a jsx code (or other method of shelling out if required) with a parameter.  So if the text file contains:
    'Text Item 1',1
    'Text Item 2',2
    'Text Item 3',5
    Then I want three menu items labelled 'Text Item 1', 'Text Item 2' and 'Text Item 3' where selecting the menu items calls a jsx with parameters 1,2 and 5 respectively. I've happily done this in Bridge using a jsx script - but doing this in photoshop seems a different kettle of fish...
    So - are there any recommenations for dummies guides to help me through this?
    thanks in advance!

    I would second Al's suggestions to try one of Tom Wolsky's books and also take a look at the FCE forum.
    Regarding not using the full power of FCE, I don't think anyone does.
    It's like climbing one of those mountains where you seem to be reaching the summit only to discover, when you get there, that there is yet another peak ahead !

  • Paging File Recommendations - Looking for Experiences / Opinions

    Oracle EE 10.2.0.1
    OS: Win 2003 Server x64
    RAM: 32GB
    Proc: 16x 3.5ghz
    I currently have our system set to use a 18GB page (Across multiple hard drives).  The server has 33GB of RAM in it so I'm wondering how much of a benefit I could gain by uping the page file.
    I've read recommendations from Oracle that the paging file needs to be the same size as the amount of system RAM and I've read that paging for windows needs to be 1.5x the amount of RAM.
    Things are running fine at the moment but I'm always looking to improve the system. Just curious about others experiences with the OS page file and how they've set it because sometimes more is not better .
    Thank you for your time and Opinions if posted.
    SB

    b96f5b4b-b63b-4542-9fce-b4877c321af2 wrote:
    Typically I use ProcXP to monitor the paging and it is full 50% of the time, do you have another monitoring tool you might suggest? Or is the only advice/experience you can provide whimsical?
    It's not whimsical.  It's a valid point.
    Things are running fine at the moment but I'm always looking to improve the system
    You appear to have developed a case of Compulsive Tuning Disorder.  Your time would be better spent looking for real, measurable bottlenecks, not changing something just because it doesnt' exactly match some piece of advice that is itself just a 'general rule'.  Go get a cup of coffee.  Stop by the secretary's desk and flirt.  Re-read the Concepts manual.
    ============================================================================
    BTW, it would be really helpful if you would go to your profile and give yourself a recognizable name.  It doesn't have to be your real name, just something that looks like a real name.  Who says my name is really Ed Stevens?  But at least when people see that on a message they have a recognizable identity.  Unlike the system generated name of 'ed0f625b-6857-4956-9b66-da280b7cf3a2', which is no better than posting as "Anonymous".
    All you ed0f625b-6857-4956-9b66-da280b7cf3a2's look alike . . .
    ============================================================================

  • Finder crashes when "looking for networks" - workaround that helps

    I've read through most of the messages about finder crashes, but what's going on in my case I haven't seen. As I have a work around, I thought I should post.
    If for whatever reason the wireless connection pauses or gets interrupted (for example, by closing the lid), the finder hangs in the process of "looking for networks."  Most of the time I can still pull up the dock -- the spinning beach ball only clicks in if I mouse over the top menu bar. Sometimes (but not always) I can quit open applications through the dock before I have to do a hard reset.
    My workaround is this: I turn wi-fi off before I close the lid. When I open the lid, I wait a short time -- 30 seconds, about -- and turn the wireless back on, and this way I can avoid the finder crashing.  If the wi-fi pauses for some other external reason, when "looking for networks" starts up, the finder will hang again.
    It's way past  time that Apple coughs up a permanent fix, but this might help somebody who's having the same problem.  And maybe somebody has a better workaround, in which case, I'd love to hear about it.

    Fire_Bird wrote:
    1. Going into a folder on my external hard drive that contains the installer for divx for mac.
    Divx has been a source of problems with both Tiger & Leopard. See for example Mac OS X 10.5: Finder may not fully "load". If you have installed it, it is probably at least part of your problem.
    then i erased the whole thing, and used the Mac OS X 10.5 install DVD that came with my mom's iMac (still happens)
    This is not recommended. The install disks that come with specific Mac models do not necessarily install the same things or do all the error checks that the retail Leopard installer disk does. (It is also a violation of the software license to install it on another Mac.) If you want a trouble-free, supported installation of Leopard, use only the retail installer or a disk specifically intended for your exact Mac model.

Maybe you are looking for