Lookup code not appearing

Hi
I have an issue with Lookup values of leave reason in terminate employment form.
It is displaying only 3 leave reasons(Deceased, Gross Misconduct, Retirement). I have switched to Application developer and checked for the "LEAV_REAS" lookup values. there are 48 lookup codes and meanings and all are active.
Why these are not being displayed in the terminate employment form?
And I've added a new lookup code for the existing code. This is appearing in the terminate employment form.
My doubt is why the seeded codes are not being displayed and why the custom added is appearing.
Regards
BalaKrishna

BalaKrishna Reddy Avuthu wrote:
Hi Vinayak
Thanks for your reply.
I have checked whether the codes are enabled or not and dates too. There is no problem with them.
How can I change the legislation you were talking about? You cannot change the legislation for existing seeded values. If you need to use some reasons that are defined for other legislations, i suggest creating them and using the same.
>
Is there any problem if I define own codes without any tags? What could be the affect in legislation perspective? There is no problem with creating lookup codes which are not having tags, you can and will be able to use the new codes. However, they will be available in all business groups within your installation.
To check the legislation code for business groups, use the following query.
select name, legislation_code from per_business_groups
Edited by: Vinayaka Prabhu on Apr 24, 2009 2:08 PM

Similar Messages

Treatment of exchange rate difference- company code not appear in the list

Dear guru,
I am configuring the treatment of exchange rate difference (SPRO> MM> LIV > Incoming invoice> configure how exchange rate differences are treated). However,the company codes that needed to be configured are not appear in the list. Please note that in the config screen, dont have the option of "New entry", we only set base on the list of existing company codes.
Also, please be noted that we configured accounts for KDM, PRD in OBYC already
Appreciate your respond.
Thanks and best regards,
Hong

Hi,
Check in table "T169P" & "T169V", whether your Co. code exists or not? If not then maintain following config settings.
SPRO > Materials Management > Logistics Invoice Verification > Incoming Invoice
> Maintain Default Values for Tax Codes (After maintaining this entry by "New Entries", it will start appearing for following options)
> Configure How Exchange Rate Differences Are Treated
> Configure How Unplanned Delivery Costs Are Posted
> Edit PO Supplement Text in Invoice Verification
> Set Check for Duplicate Invoices

Tax code not appearing in Header data of MIRO

Dear All,
I have one query and it is as follows.
I created one Input tax code A3 in transaction FTXP.
When I went to transaction MIRO this tax code A3 is not appearing in header data of MIRO.
Can you pls tell is there any other settings to be done to fullfill the above requirment.
Thanks in advance
Babu

Hi
Create a tax code in FTXP
Then assigen tax code to company code
Maintain condition records FV11
Try it out
Regards,
Raman

Surcharge tax code not appear in Remittance Challan(J1INCHLN)

Hi,
Surcharge W/tax code is not being displayed in Remittance Challan(J1INCHLN). While we go to J1INCHLN for Creation of Remittance Challan - Post Outgoing Payment :Header Data(F-07) adjusting with 1 based on Document Number it shows all four values of Base, Surcharge, Education Cess and Higher Edu Cess. After adjusting Total TDS value value and SAVE the document, screen appears Create Remittance Challans. Here it shows Bsse, Education Cess and Higher Edu Cess values with corresponding tax codes except surcharge tax codes and values. As a result Total TDS value which was deducted in J1INCHLN (F-07) screen is not being matched with TDS amount which shows in the screen after saving the record. Why this Surcharge tax code and corresponding value is not being appeard after configuration in J1INSUR ?
Regards,
Anindita

Hi,
1.If you have separate tax codes for Surcharges, J_1IEWT_SURC table
should be maintained, by setting the check box checked, for the company
code. Those tax codes should be available in the J_1IEWTSURC table (use
SM30 to maintain these values)
2. If you are using separate tax codes for Education cess, those tax
codes should be maintained in the J_1IEWTECESS table and 'X' should be
maintained for the company code in J_1IEWT_ECFLAG table.
3. Make sure that in the table for surcharge you have only the tax types
relevant for surcharge AND DOES NOT CONTAIN TAX TYPES RELEVANT TO
BASIC TAX AND CESS AND
Make sure that in the table for ECESS you have only the tax types
relevant for ECESS AND DOES NOT CONTAIN TAX TYPES RELEVANT TO
BASIC TAX AND SURCHARGE
Warm Regards,
Sadashivan

Postal Code not appearing correctly thru ADDRESS statement

Hi,
I am using ADDRESS - ENDADDRESS to write company code address.
Now, Postal Code of one of the co code is maintained as
5605 LS. However, in the form it is appearing without space i.e
5605LS.
I just noticed that in function module ADDRESS_INTO_PRINTFORM, once postal code is entered into the string , there is a CONDENSE statement with NO-GAPS that suppresses the spaces.
Kindly advise how i can print postal code with space correctly in form using ADDRESS - ENDADDRESS .
Thanks
Nidhi

Hi Sohit,
We all know that the address will be generated from the FM 'ADDRESS_INTO_PRINTFORM' into a work area. That work area will be of type adrs_print. So that work area contains 10 lines of the address.
Now just observe the line into which the Postal code is populating. Then take that line value i.e for example l_wa_address-line4 into a variable and separate the number(5605) and string (LS).
concatenate v_postalcode0(4) '   ' v_postalcode4(2) INTO v_string.
Then write the below code:
READ TABLE out_tab ASSIGNING <fs_outtab> INDEX l_c_5.
      IF sy-subrc = 0.
        <fs_outtab>-value = v_string.
      ENDIF.
I hope this trick works. Try it out & let me know in case of any issues.
Don't forget to reward if this is useful.
Pavan.

While doing invoice verification, for fright value tax code not appearing

Hi All,
While doing invoice verification for PO which is having fright conditon, system is not displaying tax code in invoice.
Every time user has to select manually in the invoive verification.
Is there is any config missing for that fright condition?
Thanks in Advance.
Anil

Hi
If you wish to default the tax code for the planned delivery costs this
must be obtained from an independent source which is OMR2.
With OMR2 it is possible to default the tax in the delivery cost
line + header tax. It is not possible to default only in the delivery
cost line. The header tax needs to be changed manually to support the
different tax codes in the item lines.
Best regards
Erika

Witcher 3 and Batman: AK codes not appearing after registering GTX 980

I recently purchased an MSI GTX 980 Gaming 4G card from an online retailer called CPL (Australian based retailer in Melbourne). I was told by their staff via email that I would be able to receive the codes once I registered my product with MSI. After completing the registration process, I found no codes for either game under the 'Promotions' tab on my MSI member profile, or in the links provided in said tab. I noticed a couple of others have had this issue https://forum-en.msi.com/index.php?topic=255551.0 but this post did not contain a solution for me.
Please help, as the I would like to give these games to my girlfriend for her birthday tomorrow.
Cheers,
Yeowie

Quote from: matthyew on 28-May-15, 16:59:08
Just bought msi gtx970 and registered it using the serial from the card and my retail store said that registering would give me an activation code for Witcher 3 but there is nothing. It also says i bought the card in the USA which i didn't but theres no options to change it or find the activation code. This game is a big part of why i bought and upgraded my vid card and upgraded my system. Where is it?
Matt
duplicated post removed: >>Please read and comply with the Forum Rules.<<
about Witcher 3, open a ticket to MSI support page >>How to contact MSI.<<
and they will help you further

Expense Report Template -Accounts code not appearing when imported to AP

Hi Gurus,
I defined Expense Report Template for OU1, and for the courier expense i defined account code as 01-110-7410-00 ( Co-Dept-Courier Expns-IC)etc. with expense type as courier.
But when i submitted Expense Report using the same template and when imported to AP,accounts codes are 01-101-7610-00(Co-Dept-Salary-IC). Its totally wrong iaccounting treatment. This wrong acount codes came from HR whch assigned in Asssignment for Purchase Order Information.
Please provide your suggestions.
Thanks in advance
Regards
Dinesh

Hi
We have the same requirement.
Can I ask what your solution was?
Did you have to do some customisation or was there a standard solution available?
Many thanks in advance
SK.

Cleared items not appearing When we click cleared items in T.code FBL3N

Hi all,
        We have prepared one ABAP program, to clear all open items for a particular GL account, company code, period, fiscalyear,
         When we run this program, the open items are clearing but not appearing in cleared items,
         Can any one help me out on this........
Appreciated with points...
Regards,
sai........

Hi,
Check the cleared items in table BSIS, if the items are clearing then those items should appear in this table. Otherwise i doubt your program is not working?
Debug the program and check from which tables its selecting the data ie it should select the GL open items from table BSIS.
Raj

Tax code does not appear in any G/L account item Message FF753

Dear all,
During creating billing document, the system cannot post account document and display the follow error message:
FF753 Tax code does not appear in any G/L account item.
I tried to trace the program and found internal table t_bseg containing 3 entries:
1: Customer a/c: without tax code
2: GR clearing a/c: without tax code
3: Output tax a/c: contain tax code
Customer a/c and GR clearing a/c without tax code causes this error.
Anyone know how to solve it?
Thanks & B.Regards

Hi,
In FS00 for GR/IR A/c in Control data, in Tax Category choose all tax types allowed (*) and also tick posting without tax allowed and try again.
Regards,
Sadashivan

E-Rec Reference Code in the Publication tab should not appear after enddate

hi,
There is a requirement from the client after the end date of the publication ,the reference code should not be displayed to the candidate in the Candidate page ,presently the same is manually done in the system by changing the status to withdrawn.
Is there any way by which we can automate the process by change in customising by which the reference code does not appear after the end date
Please provide a solution if something can be done in the standard setting or do we require any Zworkflow to be developed for the same.
Regards
RK

Hi RK,
this is nothing the standard supports.
But I would not use a workflow here. As this is a mass handling workflow is no good idea. This is a task for a customer periodical service. Just build a class implementing the periodical service interface which gets all released publications which have a publication end in the past and status released and change their status using the cl_hrrcf_posting_inst_bl. This should be done in a couple of hours. Add the customizing and the issue is solved.
A requirement in this context where a customer workflow is quite handy in my opinion is a customer workflow which closes all postings and withdraws released publications when you close the requisition. This reduces the steps a recruiter has to do and ensures that no candidate applies although you are already done with the requisition.
Kind Regards
Roman

Error message "Tax code V1 does not appear in any G/L account item"

Hi,
I am getting the error message FF753- Tax code V1 does not appear in any G/L account item when I post a subsequent credit via miro.
It does not give the error with invoice or credit memo for the sames GL accounts.
History:
PO created
Goods receipt
Invoice posted and blocked as value greater than PO
Subsequent credit put on to correct the values in price query - error appears
I know if I go to FS02 and make the GL code * tax relevant it will remove the error but we dont want tax to go to this account as its a main inventory GL code.
Can anyone advise why it would appear on the subsequent credit but not on invoices or credits.
Also is there something I can set up to remove this issue apart from making the GL code tax relevant - it must not need it if the other postings work ok.
Thanks

Doesnt matter that it works for credits and invoices with blank tax you still need to put * in GL code for subsequent credit etc postings

Error FF753 Tax code 01 not appear in any G/L account item with FM Active

Hi
We have fund management configured for one of the company code, while creating billing document through VF01/VF02 we are getting the Error FF753 Tax code 01 not appear in any G/L account item.
This error however does not appear when posting directly from FI with the same tax code.
I have tried to change the message control in which case i am getting a dump pointing to PSM-FM.
Please advise.
Regards
Sandeep

Hi:
          If you could please refer to the contents of OSS Note 112609 - How are tax codes transferred to conditions ?
"Symptom
If a billing document is transferred to accounting the system displays error messages. Transferring tax codes from tax conditions into the pricing conditions and discounts does not function as expected.
Other terms
FF805, FF747, FF753, MWSKZ, MWSK1, tax code
Reason and Prerequisites
The tax condition in the SD pricing procedure contains incorrect reference steps, there are several tax conditions in the pricing procedure of which the tax codes overwrite each other or a program error exists.
Solution
In the accounting document for a billing document, the different G/L account line items are provided with a tax code. The tax code of the G/L accounts is transferred from the tax condition(s) of the billing document. How are the tax codes of the tax conditions transferred into the other conditions of a billing document ?
Basically:
The conditions of a billing document are read from top to bottom. As soon as an active tax (inactive = ' ') is read, the system transfers the tax code of this tax into the non-tax conditions as follows:
    1. The reference steps (From-step, To-step) are read (the reference steps are defined in the pricing procedure).
    2. The tax code is transferred into all conditions, for which
    the step number of the condition lies in the pricing procedure between "From-step" and "To-step",
    the condition is not inactive (exactly: the inactive flag is not equal to A (Condition exclusion), M (Inactive due to manual entry), or X (Incorrect)),
    the condition is not statistical (if it is no invoice list condition),
    the condition is no tax condition.
After the transfer of the tax code the system searches for the next active tax. If further taxes are found, their tax code is again transferred according to the above procedure. If the reference steps of different taxes overlap, tax codes that have already been transferred are overwritten. To all non-tax conditions which in the pricing procedure stand after the last tax condition the tax code of the last active tax condition is transferred if they are not statistical.
Special features:
    1. If the "From-step" of a tax condition refers to a subtotal of the pricing procedure, the tax code of the tax is not only transferred into the conditions with step number between From-step and To-step but into all non-tax conditions for which
    the step number of the condition in the pricing procedure is lower than the "To-step" of the tax condition.
    the condition is not statistical (if it is no invoice list condition).
    the condition is not a tax condition.
    2. If the "To-step" of the tax condition is smaller than the "From-step", then the system sets "To-step = From-step".
Notes:
    1. As of Release 4.0 the tax code is no longer transferred in pricing but only when the billing document is released to accounting.
    2. If you use several taxes and tax codes and Customizing is incorrect for the release of billing documents to accounting, among others the system may display error message FF747.
    3. If there are several taxes in the pricing procedure refer to Notes 72173 and 82091 for Releases 3.0D - 3.1G. For Release 3.1H, only note 82091 is relevant.
    4. For conditions which are transferred into accounting (thus not statistical, not inactive conditions) and do not contain a tax code, the system searches for a default tax code which in Accounting Customizing can be set depending on the company code (tax code for non-taxable transactions). This applies to releases up to and including Release 4.5B. For Release 4.6, refer to Note 385127."
Regards

Tax code ZT does not appear in any G/L account item

Hi Gurus
Iam facing a proble while releasing the billing document to accounting. Following error is coming up
'Tax code ZT does not appear in any G/L account item'.
FTXP setting for the tax code appears find as it is tagged to the correct GL account, but somehow the posting is not happeing.
Can you please help me out with this as Iam stuck and the testing has stopped.
Thanks
Ruchi

Hello,
please check the note 400766:
a) Consistency checks
In FI, the system checks whether there is a revenue line for each tax line. In the reverse case, for each revenue line containing a certain tax indicator there must be a tax line with this indicator.
If the first requirement is not met, the system issues error FF753. In many cases, you can solve the problem with Note 112609
by adjusting the level number in the pricing procedure in such a way that the system copies the tax indicators correctly into the
revenue lines.
If the two tax conditions refer to one revenue condition, the requirement cannot be met if the taxes have different tax indicators. In this case, you must use the tax trigger condition in accordance with note 26646.
Best regards,
Ivano.

Tax code is not appearing in PO

Hi All
I am using TAXINJ procedure.
while creating po for excise material and I clicked on tax code tab in item level in invoice then tax code is not in list but it maintain in ftxp and all conditions with gross price becomes greyout so that i can not enter gross price.
I check with j1id, it maintain correctly.taxcode also assign to country level.
Can anybody give me the solution,
1)why tax code is not appearing in tax tab in PO.and
2)why gross price condition is in display mode.
Thanks and Regards...
Trupti

> 1)why tax code is not appearing in tax tab in PO.and
If You have done all the Settings Properly then it will Show in Tax codes List. Please go to Tax code Field and Press F4 and in Next Window Click on display all Values icon and try
> 2)why gross price condition is in display mode.
Go to Gross Price Condition type in M/06 and Check Whether the Manual entries is Set to D Cannot Process Manually.
also Check whether Function Authorization is Assigned to User so that Prices Cannot be Manually Entered.

Lookup code not appearing

Similar Messages

Maybe you are looking for