Loop through all layers and sublayers

is there a way that I can loop through all layers and sublayers looking for a name of a layer? I have one that loops through only top level layers. I am thinking I have to somehow incorperate all pathItems, groupItems and the like to incorperate all types of "layers" there might be, since a group is technically not a layer but a groupItem.
this is what I am doing so far:
for (var i = 0; i < numberOfLayers; i++) {
    var customName = "div structure";
    var myLayer = app.activeDocument.layers[i];
    var myLayer = myLayer.name;
    alert(myLayer);
    //alert (myLayer);
    if (customName == myLayer) {
        alert("layer matches");
    else { break; }
any ideas?

Sorry I don't understand what it is you are trying to achieve… Most collections offer a getByName() method if you know what you are looking for eg…
doc.layers.getByName( 'fluff' );
This should return you the first found or error so you need to try & catch when using this…

Similar Messages

Import Illustrator File with multiple layers and sublayers as composition retaining all layers and sublayers

I have drawn a country map with multiple layers and sublayers including streets, cities, rail lines, ...
Now I want to create a template for my collegues in After Effects.
For this I want to import the .ai file into After Effects retaining all sublayers and layers in compositions and subcompositions.
When I do that, I get the first couple of layers correctly, the other ones comes in one merged composition.
What can I do, to get all layers each as a layer in After Effects?
Yours, Raphael

Illustrator only imports the first level of layers. If you have groups or paths below you need to release the groups to layers. The layers will then be stacked in order as sub layers. Then you need to move them up.
The steps are to select a layer in the Illustrator layer panel, then without selecting any specific element in the layer click on the menu in the top right corner and select release to layers. All a elements in that layer will be converted to layers. Now select them all and drag them up above the original layer. This will leave the original layer empty and put all elements in new layers.
Here's a tutorial I did a zillion years ago which uses this technique to turn a blend into a morph.
Morphing With Adobe Illustrator. I hope this helps.

How to Loop through another list and update a column with SharePoint Designer 2013 Workflow

Hi,
I am trying to get my head around the new 2013 Workflow Engine and SharePoint Designer 2013 Workflow Text-Based Designer.
I have two lists.
List A has 2 columns: Title, Completed (Yes/No)
List B has 3 columns: Title, LookupListATitle, Completed (Yes/No)
All the 2013 Workflow components have been installed and configured and I am selecting the 2013 Workflow option in SPD
I am trying to set off a 2013 Workflow when an item in List A is edited to Loop through List B and select items where the LookupListATitle column's value is equal to the Title value of the current item, and set the value of the Completed column for those
items in ListB to "Yes".
I have the Workflow configured like this:
Stage: Stage 1
IF Current Item:Completed equals Yes
Loop: 1
The contents of this loop will run repeatedly while: ListB:LookupListATitle equals Current Item: Title
Update item in ListB.
(The dialog options for the update item action as follows:
List: ListB
Field: Completed, Value: Yes
In the Find the List Item section
Field: LookupListATitle
Value: Current Item: Title)
Transition to stage
Go to End of Workflow
When I update an item in ListA and set its Completed column to Yes, I would expect the Workflow to find all the items in List B where the Lookup column is equal to ListA's Title (there are 2) and update their Completed column to Yes. But it doesn't work.
When I look at the Workflow Status it says the Internal Status is "Canceled" and the information pop up has the following alien language (and may be truncated):
RequestorId: 95f03b62-8956-ac14-c5cf-dc98c89c589c. Details: System.ArgumentException: Invalid JSON primitive: Item001. Parameter name: value at Microsoft.Workflow.Common.Json.JXmlToJsonValueConverter.ConvertStringToJsonNumber(String value) at Microsoft.Workflow.Common.Json.JXmlToJsonValueConverter.ReadPrimitive(String
type, XmlDictionaryReader jsonReader) at Microsoft.Workflow.Common.Json.JXmlToJsonValueConverter.JXMLToJsonValue(XmlDictionaryReader jsonReader) at Microsoft.Workflow.Common.Json.JXmlToJsonValueConverter.JXMLToJsonValue(Stream jsonStream, Byte[] jsonBytes)
at Microsoft.Activities.DynamicValue.ParseJson(String json) at System.Activities.CodeActivity`1.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
executor, BookmarkManager bookmarkManager, Location resultLocation)
Unfortunately I don't have access to the server, logs etc.
I would love to find some tutorials, or any books on SharePoint Designer 2013 in general and Workflows in particular but my searches haven't turned up much so far apart from a pre-release Beginning SharePoint Workflows which is in its very early stages and
not much help yet.
Can anyone give me some guidance on how to set up While Loops to iterate through a related list using SharePoint Designer 2013?
Mark

Hi,
I understand that you wanted to update the items in the other list (Participants) where the Course equals the Current Item.
You need to use “Call HTTP Web Service" action and “Build Dictionary" action to get the Maxid and then loop Participants to update the items.
You can follow the steps as below to achieve what you want:
Create a custom list named Courses, add columns: Title(Single line of text), Course ID(Single line of text), Course Finalised (Yes/No).
Create a custom list named Participants, add columns: Title(Single line of text), Course(Lookup), CourseFinalised (Yes/No).
Create workflow associated to Courses, start the workflow automatically when an item is created or changed.
Add conditions and actions:
The HTTP URL is set to
https://sitename/_api/web/lists/GetByTitle('listname')/items?$orderby=Id%20desc and the HTTP method is set to “GET”. Then the list will be order by Id and desc.
Then if Course Finalised is equal to Yes, the CourseFinalised of the associated items in Participants will be updated to Yes.
More information:
http://sergeluca.wordpress.com/2013/04/09/calling-the-sharepoint-2013-rest-api-from-a-sharepoint-designer-workflow/
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Dbma_scheduler job executing procedure that loops through all client schemas in the database rolls back transaction incase of exception

Hi,
Needed your inputs on approach to implement a job using dbms_scheduler.
We have around 2000 schemas. Each schema has a package with 2 procedures.
The requirement is to create a single job in SYS that would loop through each schema and run the procedures at a specific time ( once a day) and send email notification on success or failure.
Job script:
BEGIN
    dbms_scheduler.create_job( job_name=> 'LOAD_EACH_SCHEMA_AUDIT_DATA',
                               job_type=>'PLSQL_BLOCK',
                               job_action=>'BEGIN sys.p_loadaudit;
                                END;',
                               start_date=>systimestamp,
                               repeat_interval=>'FREQ=MINUTELY;INTERVAL=1',
                               number_of_arguments=>0,
                               enabled=> true,
                               comments=>'Job repeat interval is every 5 mins' );
                               END;
Note: for testing purpose i have set repeat interval to minutely.
Procedure job will be executing:
Procedure sys.p_loadaudit:
CREATE OR REPLACE
PROCEDURE p_loadaudit
AS
    v_count          NUMBER:= 0;
    lv_error_message VARCHAR2(4000);
    vstmt            VARCHAR2(4000);
BEGIN
    FOR i IN
    ( SELECT username FROM dba_users WHERE username LIKE 'ABCFIRM%'
    LOOP
        vstmt:= 'begin ' || i.username || '.pkg_audit_info.p_load_coa; end;';
        EXECUTE immediate vstmt;
        vstmt:= 'begin ' || i.username || '.pkg_audit_info.p_load_am; end;';
        EXECUTE immediate vstmt;
    END LOOP;
EXCEPTION
WHEN OTHERS THEN
    lv_error_message := 'Error in procedure p_loadaudit: ' || SQLCODE || ' -ERROR- ' || SUBSTR(
    sqlerrm,1,300) || '*' || dbms_utility.format_error_backtrace;
    raise_application_error(-20002,lv_error_message);
END p_loadaudit;
Example of one schema: SCHEMA_01
create or replace
PACKAGE pkg_audit_info
AS
type cursortype
IS
    ref
    CURSOR;
        PROCEDURE p_load_COA;
        PROCEDURE p_load_AM;
   END pkg_audit_info;
create or replace
PACKAGE body pkg_audit_info
AS
PROCEDURE p_load_COA
AS
BEGIN
INSERT INTO TABLE1();
EXCEPTION
WHEN OTHERS THEN
    lv_error_message := 'Error in procedure pkg_audit_info.p_load_COA: ' || SQLCODE
    || ' -ERROR- ' || SUBSTR(SQLERRM,1,300) || '*' || dbms_utility.format_error_backtrace;
    RAISE_application_error(-20002,lv_error_message);
END p_load_COA;
PROCEDURE p_load_AM
AS
BEGIN
INSERT INTO TABLE2();
EXCEPTION
WHEN OTHERS THEN
    lv_error_message := 'Error in procedure pkg_audit_info.p_load_AM: ' || SQLCODE ||
    ' -ERROR- ' || SUBSTR(SQLERRM,1,300) || '*' || dbms_utility.format_error_backtrace;
    RAISE_application_error(-20002,lv_error_message);
END p_load_AM;
END pkg_audit_info;
Table1 and table1 exist in schema_01.
All 2000 schemas have same package.procedures.
Due to security reasons i have removed the actual code.
I was able to execute the job successfully. However, when a schema procedure (SCHEMA_01.pkg_audit_info.p_load_COA) throws an exception, the job fails and all transaction is rolled back.
Is there a way to loop through each schema and execute the related procedures. Even if exception happens, it should rollback only for that schema and continue the other schemas in the loop?
Please let me know if there is a better way to achieve this. Is the way i am handling exceptions in the job/procedure correct?
Thanks

Hi,
RAISE_APPLICATION_ERROR will cause the program to exit back to the caller, even if you place it in a block within the loop, so the RAISE or RAISE_APPLICATION_ERROR instruction should be placed in your "pkg_audit_info.p_load_AM" and "pkg_audit_info.p_load_coa" procedures. This way, you can use a block inside the loop and log the error.
FOR i IN
    ( SELECT username FROM dba_users WHERE username LIKE 'ABCFIRM%'
    LOOP
       BEGIN
        vstmt:= 'begin ' || i.username || '.pkg_audit_info.p_load_coa; end;';
        EXECUTE immediate vstmt;
        vstmt:= 'begin ' || i.username || '.pkg_audit_info.p_load_am; end;';
        EXECUTE immediate vstmt;
EXCEPTION
WHEN OTHERS THEN
    --> Log the error in a custom log table otherwise you will not know what happened for that schema: don't forget the username
END;
END LOOP;

How can I loop through a Vector and compare

I'm working on a school project that is a quiz server. Instructors could telnet into the app and create quizes and then users can take them. I have it so it can set up new quizes so far. Right now I'm working on it so the user can choose a quiz and take the test. Since it requires proper user handling I have it so I display the quiz ID and quiz Name. The user would need to enter the quiz ID to take it. I have it that as it displays the ID's it enters them into a Vector. Then I do a loop through all elements until I get one that equals the user selection. I'm having problems with it though. Here's some code:
do
quizCheck = false;
for (int i=0;quizReference.size();i++)
if (selectionInt==quizReference.elementAt(i))
quizCheck=true;
}while (quizCheck==false);
It's giving me a Error #300:method==(int,java,lang.Object)not found in class testproject.TestProject on the if line. Is there a way to handle this scenario. Also is there a better way?

Hi,
elementAt(...) returns an Object - of what type is your selectionInt? - guess, it is a primitve int value, not an Object.
You can find it easier - say, you have Integer values in that Vector - and selectionInt is an int value - now you can find it using
int p = quizReference.indexOf(new Integer(selectionInt));
p is either -1 (if not found) or the index of the first found element, with the same int value as selectionInt.
Hope, this helps
greetings Marsian

Loop through all controls in view

Hi Everyone,
I need to cycle through all the controls on a view.
I have set each of the controls of type UISegmentedControl with a unique tag number.
I am using this tag number to perform a lookup in database for the value of the segmented control.
So, my question is this.... how do i cycle through all the controls on a view?
thank you
take care
tony

alt-088 wrote:
I think we are close - just one correction.
The segmented controls are all at design time, there will be no new controls added.
I'm not clear on what's been corrected. The sample code I gave you assumed all the controls were known at compile time. So I think the example code addressed the problem you're trying to solve. The last paragraph of that post was just an afterthought, to explain what to do in case you ever needed to add controls dynamically.
-> loop through all controls on view
-> if control is of type uisegmentdcontrol
then do database lookup on tag
Set segment value to value returned from database
Once again, if I correctly understand the above, the code I gave you does exactly what you want. You haven't indicated you want to take any action when a control is not a segmented control, so I don't see why you'd want to include them in the loop. However, if you actually do need to enumerate non-segmented controls (or other subviews), my last response advised you to set the tag properties of all those other controls, making sure the range of those tags is different from the range of the seg control tags.
The part that eludes me is the looping through all the controls on the view
I guess the part that eludes me is why you're so interested in enumerating all the controls, when you only seem to be interested in the segmented controls. But even if you really do need to look at every control, I don't see why you're rejecting the solution I gave you. [viewWithTag:|http://developer.apple.com/iphone/library/documentation/UIKit/Ref erence/UIViewClass/UIView/UIView.html#//appleref/doc/uid/TP40006816-CH3-SW26] is a powerful method which recursively walks the entire view hierarchy to find whatever tag it's looking for. If you use it correctly (e.g. by assigning unique tag numbers that tell you what type of control you've found), it will save you lots of trouble.
If, for some reason, you insist on doing this job without using viewWithTag, the next best might be something like this:
- (void)doSomethingWithEachSegCtrlInView:(UIView *theView) {
UIView *subView;
for (subView in theView.subviews) {
if ([subView respondsToSelector:@selector(selectedSegmentIndex)]) {
// subView is a segmented control ...
else {
// subView is not a segmented control ...
if ([subView.subviews count]) {
// this subview has its own subviews
[self doSomethingWithEachSegCtrlInView:subView];
Note that the above is a more difficult, more error prone method than the sample in my first response. Firstly, it needs to recurse in case any controls are placed on subviews of the main view (or on subviews of those subviews, etc.), a capability already built into viewWithTag. Secondly it needs to identify the type of each subview object. [respondsToSelector:|http://developer.apple.com/iphone/library/documentation/Co coa/Reference/Foundation/Protocols/NSObjectProtocol/Reference/NSObject.html#//appleref/occ/intfm/NSObject/respondsToSelector:] is the preferred way of identifying the class of an object, especially when the selector argument represents one of the methods you intend to use. However there's no reason to get into the business of identifying the class of an object, when you could have given that object a unique tag number in the xib, where there was no question about its class.
Hope the above communicates the solution better than my first response!
- Ray

Simultaneously select multiple layers and sublayers

Hello
I am having to select multiple layers and their sublayers in Illustrator 2014, but taking the procedure described in the post below only lets you select multiple "main layers" with the sublayers left unselected.
Re: Is it possible to select multiple layers by selecting first and last layers?
Would someone please explain how both layers and sublayers can be selected in the Layers panel?
Getting more and more confused about the layer control in Illustrator..
Thank you in advance,
Ead

Ead,
I believe it is a matter of implicit selection, which may be a bit diconcerting.
You may try this:
1) Create a (small) number of layers with sublayers (or use the set yopu have), and tick Paste Remembers Layers;
2) ShiftClick first and last (relevant) and Ctrl/Cmd+C;
3) Create a new document and Ctrl/Cmd+F.
Is anything missing (obviously, everything copied has been selected)?

Looping through all the Nodes at any Particular Level Specified

Dear Forum Members,
I have an XML File in the database in a Column of type XMLTYPE.
The Format is given below
<XML-SSDFILELIST>
<Training>
<BRKCD_STMNSWTINVIN_C Key="6707">
<FINISHED><![CDATA[This is a Finished data ]]></FINISHED>
<CONTACT-NUMBER><![CDATA[This is a CONTACT-NUMBER data ]]></CONTACT-NUMBER>
<DEFAULT></DEFAULT>
<MIN></MIN>
<MAX></MAX>
<UNIT></UNIT>
<FORMULA></FORMULA>
<FORMULA-DESC></FORMULA-DESC>
<ADVANCED-FORMULA></ADVANCED-FORMULA>
<INTERNAL-ADAPT-DESC></INTERNAL-ADAPT-DESC>
<DATA-DESC-REPORT></DATA-DESC-REPORT>
<REV-DESC></REV-DESC>
</BRKCD_STMNSWTINVIN_C>
<BRKCD_STREDSWTINVIN_C Key="6708">
<FINISHED><![CDATA[This is a Finished data ]]></FINISHED>
<CONTACT-NUMBER><![CDATA[This is a CONTACT-NUMBER data ]]></CONTACT-NUMBER>
<DEFAULT></DEFAULT>
<MIN></MIN>
<MAX></MAX>
<UNIT></UNIT>
<FORMULA></FORMULA>
<FORMULA-DESC></FORMULA-DESC>
<ADVANCED-FORMULA></ADVANCED-FORMULA>
<INTERNAL-ADAPT-DESC></INTERNAL-ADAPT-DESC>
<DATA-DESC-REPORT></DATA-DESC-REPORT>
<REV-DESC></REV-DESC>
</BRKCD_STREDSWTINVIN_C>
<VSACD_TIPER_C Key="7285">
<FINISHED><![CDATA[This is a Finished data ]]></FINISHED>
<CONTACT-NUMBER><![CDATA[This is a CONTACT-NUMBER data ]]></CONTACT-NUMBER>
<DEFAULT></DEFAULT>
<MIN></MIN>
<MAX></MAX>
<UNIT></UNIT>
<FORMULA></FORMULA>
<FORMULA-DESC></FORMULA-DESC>
<ADVANCED-FORMULA></ADVANCED-FORMULA>
<INTERNAL-ADAPT-DESC></INTERNAL-ADAPT-DESC>
<DATA-DESC-REPORT></DATA-DESC-REPORT>
<REV-DESC></REV-DESC>
</VSACD_TIPER_C>
<VSSCD_NTHRESPLA_C Key="6266">
<FINISHED><![CDATA[This is a Finished data ]]></FINISHED>
<CONTACT-NUMBER><![CDATA[This is a CONTACT-NUMBER data ]]></CONTACT-NUMBER>
<DEFAULT></DEFAULT>
<MIN></MIN>
<MAX></MAX>
<UNIT></UNIT>
<FORMULA></FORMULA>
<FORMULA-DESC></FORMULA-DESC>
<ADVANCED-FORMULA></ADVANCED-FORMULA>
<INTERNAL-ADAPT-DESC></INTERNAL-ADAPT-DESC>
<DATA-DESC-REPORT></DATA-DESC-REPORT>
<REV-DESC></REV-DESC>
</VSSCD_NTHRESPLA_C>
<VSSCD_QTHRESPLA_C Key="6267">
<FINISHED><![CDATA[This is a Finished data ]]></FINISHED>
<CONTACT-NUMBER><![CDATA[This is a CONTACT-NUMBER data ]]></CONTACT-NUMBER>
<DEFAULT></DEFAULT>
<MIN></MIN>
<MAX></MAX>
<UNIT></UNIT>
<FORMULA></FORMULA>
<FORMULA-DESC></FORMULA-DESC>
<ADVANCED-FORMULA></ADVANCED-FORMULA>
<INTERNAL-ADAPT-DESC></INTERNAL-ADAPT-DESC>
<DATA-DESC-REPORT></DATA-DESC-REPORT>
<REV-DESC></REV-DESC>
</VSSCD_QTHRESPLA_C>
<VSSCD_VDFL_C Key="6269">
<FINISHED><![CDATA[This is a Finished data ]]></FINISHED>
<CONTACT-NUMBER><![CDATA[This is a CONTACT-NUMBER data ]]></CONTACT-NUMBER>
<DEFAULT></DEFAULT>
<MIN></MIN>
<MAX></MAX>
<UNIT></UNIT>
<FORMULA></FORMULA>
<FORMULA-DESC></FORMULA-DESC>
<ADVANCED-FORMULA></ADVANCED-FORMULA>
<INTERNAL-ADAPT-DESC></INTERNAL-ADAPT-DESC>
<DATA-DESC-REPORT></DATA-DESC-REPORT>
<REV-DESC></REV-DESC>
</VSSCD_VDFL_C>
<VSSCD_VMAX_C Key="6270">
<FINISHED><![CDATA[This is a Finished data ]]></FINISHED>
<CONTACT-NUMBER><![CDATA[This is a CONTACT-NUMBER data ]]></CONTACT-NUMBER>
<DEFAULT></DEFAULT>
<MIN></MIN>
<MAX></MAX>
<UNIT></UNIT>
<FORMULA></FORMULA>
<FORMULA-DESC></FORMULA-DESC>
<ADVANCED-FORMULA></ADVANCED-FORMULA>
<INTERNAL-ADAPT-DESC></INTERNAL-ADAPT-DESC>
<DATA-DESC-REPORT></DATA-DESC-REPORT>
<REV-DESC></REV-DESC>
</VSSCD_VMAX_C>
<VSSCD_VMIN_C Key="6271">
<FINISHED><![CDATA[This is a Finished data ]]></FINISHED>
<CONTACT-NUMBER><![CDATA[This is a CONTACT-NUMBER data ]]></CONTACT-NUMBER>
<DEFAULT></DEFAULT>
<MIN></MIN>
<MAX></MAX>
<UNIT></UNIT>
<FORMULA></FORMULA>
<FORMULA-DESC></FORMULA-DESC>
<ADVANCED-FORMULA></ADVANCED-FORMULA>
<INTERNAL-ADAPT-DESC></INTERNAL-ADAPT-DESC>
<DATA-DESC-REPORT></DATA-DESC-REPORT>
<REV-DESC></REV-DESC>
</VSSCD_VMIN_C>
<VSSCD_VTHRESPLA_C Key="6272">
<FINISHED><![CDATA[This is a Finished data ]]></FINISHED>
<CONTACT-NUMBER><![CDATA[This is a CONTACT-NUMBER data ]]></CONTACT-NUMBER>
<DEFAULT></DEFAULT>
<MIN></MIN>
<MAX></MAX>
<UNIT></UNIT>
<FORMULA></FORMULA>
<FORMULA-DESC></FORMULA-DESC>
<ADVANCED-FORMULA></ADVANCED-FORMULA>
<INTERNAL-ADAPT-DESC></INTERNAL-ADAPT-DESC>
<DATA-DESC-REPORT></DATA-DESC-REPORT>
<REV-DESC></REV-DESC>
</VSSCD_VTHRESPLA_C>
</Training>
</XML-SSDFILELIST>
Is there any way I can Loop through all the Child records at 3rd Level(Bolded Level in the File).
Regards
Madhu.

check this blog,
http://www.oracleappshub.com/11i/oracleapps-responsibility-vs-sap-functions/
Re: How to change OM responsibility as read-only in oracle applications 11i
read only responsibility-user

I was wondering how I can loop through all records in a database?

I'm using a do while loop to loop through all the records in a database is there a way I can simulate to EOF. I tried something to simulate it but I don't think it'll work. I assume there's a better way.
Here's my code:
boolean noRecords=false;
do
noRecords=false;
if (queryResults.next())
serverOutput.print(queryResults.getInt("itemID");
serverOutput.println(queryResults.getString("itemName");
else
noRecords=true;
}while(noRecords==false);

i think i know what you mean...
try this
while (queryResults.next()) {
serverOutput.print(queryResults.getInt("itemID");
serverOutput.println(queryResults.getString("itemName");
when .next() returns false, it will exit the while loop. you don't need the other code you have there, the above should do it all.
is that what you're after?

Loop Through Excel Files and Load into SQL Server Table

I'm following the example here.
https://www.youtube.com/watch?v=_B83CPqX-N4
I'm pretty sure I did all the steps, but for some reason my project is not running. I'm thinking there is a 32-bit or 64-bit issue lurking in here somewhere.
Here's my error message.
SSIS package "C:\Users\Ryan\Documents\Visual Studio 2010\Projects\Loop through Multiple Excel sheets and load them into a SQL Table\Integration Services Project1\Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Error: 0xC0209303 at Package, Connection manager "Excel Connection Manager": The requested OLE DB provider Microsoft.ACE.OLEDB.12.0 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode. Error code: 0x00000000.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
Error: 0xC001002B at Package, Connection manager "Excel Connection Manager": The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine.
For more information, see http://go.microsoft.com/fwlink/?LinkId=219816
Error: 0xC020801C at Data Flow Task, Excel Source [2]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0209303.
There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task, SSIS.Pipeline: Excel Source failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Data Flow Task, SSIS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
SSIS package "C:\Users\Ryan\Documents\Visual Studio 2010\Projects\Loop through Multiple Excel sheets and load them into a SQL Table\Integration Services Project1\Package.dtsx" finished: Failure.
The program '[5392] DtsDebugHost.exe: DTS' has exited with code 0 (0x0).
I have 32-bit Excel and 64-bit SQL Server. Is that the issue? Can someone tell me what's wrong here?
Thanks!!
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Sa-weeettttttt!! Thanks. I figured that's what it was. For the benefit of others, this link shows you exactly how to make the modification recommended above.
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Loop through all fields in a (2 page) form?

Is it possible to do it in one go?
suppose you have fields in 2 pages.. (2 subforms)
would you have to write a script that would check for all fields in page 1
and another to check for all fields in subform 2?
or can you just loop through the parent of the 2 subforms?.. (the aim would be to check that all required fields have been filled in or are not equal to their default value)
thank you in advance

You can certainly write a script that'll find all fields on all pages and perform some action on them.
I've included a sample form which contains two pages with fields on them. At the top of the first page, there's a "Find Fields" button which, when pressed, populates the list box next to it with the names of each field found across all pages. Clicking on an item in the list box will then set focus to that field.
The script uses a recursive function called GetFieldNames in a Script Object called "Utils". In the function, lines 21 - 25 are as follows:
else if (oNode.className == "field")
// oNode is a field
sFieldNames += (sFieldNames.length > 0 ? "\n" : "") + oNode.name;
If you wanted to verify that all mandatory fields were filled, you could change them to this:
else if (oNode.className == "field")
// oNode is a field
if (oNode.mandatory == "error" && (oNode.rawValue == null || oNode.rawValue.length == 0))
sFieldNames += (sFieldNames.length > 0 ? "\n" : "") + oNode.name;
That would find only fields that are required and haven't been filled accross all pages.
Stefan
Adobe Systems

For-looping Through All textFrames (cs4 jsx)

var docRef = app.activeDocument;
for (var num=0; num<docRef.textFrame.length; num++){
     alert( docRef.textFrames[num] );
I would like to for through all of the text frames in a document to experiment with what properties return what information. I have a simple test document with like three different text frames, and I want to collect info on each one. This for loop doesn't seem to work though, and I can't quite wrap my head around how the textFrame and textFrames objects work.
Thanks for the assistance!

textFrames = a collection of textFrames
textFrame = a single textFrame, for example textFrames[1] refers to the second textFrame
try this
var docRef = app.activeDocument;
for (var num=0; num<docRef.textFrames.length; num++){ // you were missing an s
     alert( docRef.textFrames[num]); // returns the object itself
     alert( docRef.textFrames[num].contents ); // returns a property (contents) of the object

Problem while looping through record set and tem table for matching data

hi I am using one record set and ane temp table and looping through both to find the match between dates.
If date matches then it shud do some processing otherwise it will return default values(null values).
FOR i IN student_rec .FIRST..student_rec .LAST          /*student_rec.school_date has 01-MAR-2012,02-MAR-2012,03-MAR-2012,04-MAR-2012,05-MAR-2012*/
LOOP
l_return_out.school_date := student_rec(i).school_date;
l_return_out.marks_obtained := student_rec(i).marks_obtained;
FOR i IN selected_dates .FIRST..selected_dates .LAST          /*selected_dates has 02-MAR-2012,03-MAR-2012,05-MAR-2012*/
LOOP
DBMS_OUTPUT.PUT_LINE(selected_dates(i));
IF selected_dates(i)=student_rec(i).sett_date
THEN
EXIT;
end if;
     ---------call procedure P1
-----------get output as ret_val1               /*getting ret_val1 as 10 for 02-MAR-2012,03-MAR-2012,05-MAR-2012 */
     ----------call procedure P2
---------get ouput as ret_val2               /*getting ret_val1 as 20 for 02-MAR-2012,03-MAR-2012,05-MAR-2012 */
if ret_val1>0 0r ret_val2>0
then
l_return_out.has_csts := yes;
l_return_out.cst_present := 10;
l_return_out.cst_absent := 20;
else
l_return_out.has_csts :=No;
l_return_out.cst_present:= 0;
l_return_out.cst_absent := 0;
end if;
end loop;
l_return_out.has_cst := student_rec(i).has_csts;
l_return_out.cst_missing := student_rec(i).cst_present;
l_return_out.cst_existing := student_rec(i).cst_absent;
PIPE ROW(l_return_out);
END LOOP;
RETURN ;
I am expecting this as result
school_date     marks_obtained     has_csts     cst_present cst_absent
01-MAR-2012     20
02-MAR-2012     30          yes 10          20
03-MAR-2012     40           yes 10          20
04-MAR-2012     70
05-MAR-2012     60          yes 10          20
but this as result
school_date     marks_obtained     has_csts     cst_present cst_absent
01-MAR-2012     20
02-MAR-2012     30
03-MAR-2012     40
04-MAR-2012     70
05-MAR-2012     60
Can anybody please highlight the mistake i am doing while processing the logic??
Edited by: 942390 on Jul 13, 2012 8:44 PM
Edited by: 942390 on Jul 13, 2012 8:45 PM

I am getting a set values from a record set....student_rec
and on pipelining this record set from 1st till last
i am getting this
school_date     marks_obtained     has_csts     cst_present cst_absent
01-MAR-2012     20
02-MAR-2012     30
03-MAR-2012     40
04-MAR-2012     70
05-MAR-2012     60
so initially has_csts, cst_present and cst_absent is null for all dates.
now have a temp table of selected_dates(which contains these dates 02-MAR-2012,03-MAR-2012,05-MAR-2012)
now I am want to populate has_csts, cst_present and cst_absent with data only for those dates which is present in selected_dates temp table(02-MAR-2012,03-MAR-2012,05-MAR-2012) and that too has_csts, cst_present and cst_absent will be populated with some condition (based on the values from procedure got from P1 and P2).
so want result set to look like
school_date     marks_obtained     has_csts     cst_present cst_absent
01-MAR-2012     20
02-MAR-2012     30          yes 10          20
03-MAR-2012     40           yes 10          20
04-MAR-2012     70
05-MAR-2012     60          yes 10          20
so what could be the possible solution to obtained this....

How to loop through report records and update the record

I have a updateable report. And there is a select LOV in that report. How to loop though the report and save all the changes to the LOV.

1. Please tell us your first name and put it in your handle and/or profile to help us.
2. Explain your question in more detail, perhaps with an example and by showing code you already are using.
Scott

Loop through all items in all data blocks?

Is there a way to loop through every item in every data block and set the property of a format mask?

I do not know what error it is, only that an on-error trigger fires.
I found out one thing I was definitely doing wrong, using nextblock, nextitem properties at the wrong level.
DECLARE
     v_firstblock VARCHAR2(50);
     v_currentblock VARCHAR2(50);
     v_firstitem VARCHAR2(50);
     v_currentitem VARCHAR2(50);
     v_counter NUMBER :=0;
     v_counter2 NUMBER :=0;
begin
   v_firstblock := get_form_property(:System.Current_Form,first_block);
   v_currentblock:= get_block_property(v_firstblock,nextblock);
   MESSAGE(v_firstblock||v_currentblock);
     LOOP
          v_counter := v_counter +1;
          IF (v_counter >10) THEN
               exit;
          END IF;
          IF (v_currentblock = v_firstblock) THEN
                         exit;
       ELSE
               v_firstitem := get_block_property(v_firstblock,first_item);
                    IF (lower(GET_ITEM_PROPERTY(v_firstitem,format_mask))=lower('mm-dd-yyyy')) THEN
                                   SET_ITEM_PROPERTY(v_firstitem,format_mask,'DD-MON-YYYY');
                    END IF;
               v_currentitem := get_block_property(v_firstblock,first_item);
               v_currentblock:= get_block_property(v_currentblock,nextblock);
               GO_BLOCK(v_currentblock);
                    LOOP
                         v_counter2 := v_counter2 +1;
                         IF (v_counter2>15) THEN
                              exit;
                         END IF;
                         v_currentitem:= get_item_property(v_currentitem,nextitem);
                         MESSAGE(v_counter||v_firstblock||v_currentblock||v_firstitem||v_currentitem||v_counter2);
                         IF (v_currentitem <> v_firstitem) THEN
                              IF (lower(GET_ITEM_PROPERTY(v_currentitem,format_mask))=lower('mm-dd-yyyy')) THEN
                                   SET_ITEM_PROPERTY(v_currentitem,format_mask,'DD-MON-YYYY');
                              END IF;
                         ELSE
                              exit;
                         END IF;
                    END LOOP;
           END IF;
END LOOP;
     end;Here is updated new code. I am currently trying to debug it, it has crashed my form on the server when tied to a button press.
EDIT: So far I have found that it infinitely loops through the first 3 items and a null item in the first block. Still looking into why...
EDIT: Some code changes to temporarily stop infinite loop and make v_currentblock actually change. Still loops through same 3 items in the first data block even though v_currentblock changes.
Edited by: 878576 on Oct 21, 2011 12:46 PM

Loop through all layers and sublayers

Similar Messages

Maybe you are looking for