Loops Not Available in GarageBand
Help? My sons are anxious to get going with our new computer. We just got our new iMac, and when they open GarageBand, all the instrument loops are greyed out. When they try clicking on one, it tells us we have to "download and install." We go through the motions - still, nothing. It always goes back to asking us to to download and install. Am I doing something wrong?
I had the same question, and the link provided doesn't really answer it unfortunately.
My purchase of a Mac Mini came with iLife and Garageband pre-installed, but without loops. When the app directs to the system update there are no files to download. The simple answer would be to install them from the iLife disk however as this was pre-installed I was not provided with the iLife disks, just the Tiger disks and Leopard upgrade disk.
Whats the best way to get hold of these loops?
Similar Messages
-
Airport not available to Garageband
Why is airport not available in GarageBand on my wife's iPad? The AirPort connect is available on Music, but it doesn't hold over to GarageBand. Sliding the screen up from the bottom reveals volume and other settings but not AirPort as on my iPad.
In GarageBand settings, go to the bottom, enable airplay-Bluetooth
-
HS 500 Headset replacement ear loop not available
Hi There,
Looking at the posts here It seems that I am one of many people frustrated that replacement ear loops for the Blackberry wireless headset HS-500 are not available.
RIM / Blackberry please take note that the are a lot of people frustrated that this vital component breaks so easily, and is irreplaceable. This (simple) part breaking renders the headset useless.
Yours In anticipation of someone at Blackberry taking note of the chorus of dissent and actually doing something about it....
angusthey show one here
http://www.amazon.com/gp/product/B004MGVPWU
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
Plug-ins not available when opening Garageband song with Logic-Pro 7.0.1
Can anyone help?
Whilst on the move recently I found myself composing a piece using Garageband. However when I got back to the studio and attempted to open the song using Logic Pro 7.0.1 I get:
Core Audio: Plug-in "BassAmpSi" not available! then
Core Audio: Plug-in "Hybrid Bas" not available!
As these must be Garageband instruments I don't understand why they're "not available" or what to do to make them available.
Any ideas?
Thanks everybody!I googled this topic and found a Logic forum - they said you should update your software to 7.1, then the problem vanishes.
-
Plug-ins not available when importing song from Garageband
Can anyone help?
Whilst on the move recently I found myself composing a piece using Garageband. However when I got back to the studio and attempted to open the song using Logic Pro 7.0.1 I get:
Core Audio: Plug-in "BassAmpSi" not available! then
Core Audio: Plug-in "Hybrid Bas" not available!
As these must be Garageband instruments I don't understand why they're "not available" or what to do to make them available.
Any ideas?
Thanks everybody!
G5 Dual 2Gb Mac OS X (10.3.9) 3Gb RamYeah! Had a bad experience with Tiger! My fault!
I Believed all the hype that I just had to update to Tiger as soon as it came out. So a multiple licence later and a day or so installing it all the computers in the studio I then find out that Pro-Tools wasn't compatible and had to back everything up and reformat my HD and re-install 10.3.9 which took about a year. I know it all works now (in theory) but with so much work on the go I'm shying off chancing it.
One of these days!
Thanks -
I have GarageBand 8 on config below. Not all the loops are available - many are greyed out. If I click on any of the greyed options a dialog box comes up saying "you have already initated the installation of additional content for GarageBand via Software Update. For additional information please open the Software Update application'. I do, and the last reference to GarageBand Log Entry says "2007-10-20 12:09:45 +1000: Installed "GarageBand Update" (4.1)." Other than that, nothing. GB seems to have initiated a process which hasn't been closed. It won't give me the option of installing from the DVD again. What to do.
http://www.bulletsandbones.com/GB/FAQPages/NoLoops.html
(About every 2nd thread in this forum is about this problem. It's always a good idea to do a search before you post a question. Saves other people time.) -
Trying to load loops into loop browser, garageband says " loops not in garageband format will not be displayed in browser' - this has not happened before.
aiff files were shown, how to get browser to show aiff loops?
thanks.
4bs.Hangtime,
this is all a bit much for me; GB on my laptop (G4 PB ) accepts these loops, and GB on my PB is currently running as should. The problem occured when I copied the song over to my mates G5, so I could ( supposedly ) enjoy the benefits of G5 power and speed. All that happened was a series of errors as the copied song ( which still opens ok on the PB ) such as not finding files etc; From here things got worse as I tried to reload loops and at first it all worked, then loops not recognised, and then finally, loops will not show in browser.
I have a copy of the song bsck on my PB and it loads runs and sees loops just fine; plus, all the loops load into GB and are seen.
End state is that I have a prope running GB with all loops on my PB, but my mate now has a non working GB on his G5
4bs. -
Hi.
Could you help me ....
I modified a bsp to display a PDF file into a new popup window, and I tested into my quality server using SE80 transaction and with my portal application after and evething was OK but when a released the new BSP into production server the BSP crashed.
This is the error message that throws:
503 Service not Available
Erro 6
Version 6040
MOdule http_j2ee_mt.c
Line 795
Server EMKIOAIX103_CRP_00
Details Cannot reach external application server on localhost:50000
I explain you my program does it:
1.- the user chooses the a record into a Inbox
2.- IC display its data with BSP IRecReason
3.- the user chooses a Action link
4.- IC display a action PRINT PDF
5.- the user selects a print pdf
This is my code to EH_ONGO than create the PDF spool
METHOD EH_ONGO .
DATA: function_name TYPE rs38l_fnam,
dummy(254) TYPE c,
ls_archive_index TYPE toa_dara,
ls_orderadm_h TYPE crmt_output_orderadm_h_com,
ls_activity_h TYPE crmt_output_activity_h_com,
ls_lead_h TYPE crmt_output_lead_h_com,
ls_opport_h TYPE crmt_output_opport_h_com,
ls_orgman_h TYPE crmt_output_orgman_h_com,
lt_partner_h TYPE crmt_output_partner_h_comt,
ls_pricingdata_h TYPE crmt_output_pricingdata_h_com,
ls_sales_h TYPE crmt_output_sales_h_com,
ls_shipping_h TYPE crmt_output_shipping_h_com,
lt_payplan_d_h TYPE crmt_output_payplan_d_h_comt,
ls_customer_h TYPE crmt_output_customer_h_com,
ls_cumulat_h TYPE crmt_output_cumulat_h_com,
lt_billing_h TYPE crmt_output_billing_h_comt,
lt_cancel_h TYPE crmt_output_cancel_h_comt,
lt_appointment_h TYPE crmt_output_appointment_h_comt,
lt_billplan_d_h TYPE crmt_output_billplan_d_h_comt,
lt_billplan_h TYPE crmt_output_billplan_h_comt,
lt_status_d_h TYPE crmt_output_status_d_h_comt,
lt_status_h TYPE crmt_output_status_h_comt,
lt_srv_subject_h TYPE crmt_output_srv_subject_h_comt,
lt_srv_reason_h TYPE crmt_output_srv_reason_h_comt,
lt_srv_result_h TYPE crmt_output_srv_result_h_comt,
ls_acs_h TYPE crmt_acs_h_com,
lt_orderadm_i TYPE crmt_output_orderadm_i_comt,
lt_orgman_i TYPE crmt_output_orgman_i_comt,
lt_pricingdata_i TYPE crmt_output_pricingdata_i_comt,
lt_pricing_i TYPE crmt_output_pricing_i_comt,
lt_product_i TYPE crmt_output_product_i_comt,
lt_sales_i TYPE crmt_output_sales_i_comt,
lt_shipping_i TYPE crmt_output_shipping_i_comt,
lt_schedlin_i TYPE crmt_output_schedlin_i_comt,
lt_customer_i TYPE crmt_output_customer_i_comt,
lt_partner_i TYPE crmt_output_partner_i_comt,
lt_item_cstics_i TYPE crmt_item_cstics_tab,
lt_billing_i TYPE crmt_output_billing_i_comt,
lt_cancel_i TYPE crmt_output_cancel_i_comt,
lt_finprod_i TYPE crmt_output_finprod_i_comt,
lt_ordprp_i TYPE crmt_output_ordprp_i_comt,
lt_appointment_i TYPE crmt_output_appointment_i_comt,
lt_billplan_d_i TYPE crmt_output_billplan_d_i_comt,
lt_billplan_i TYPE crmt_output_billplan_i_comt,
lt_orderadm_i_qt TYPE crmt_output_orderadm_i_qt_comt,
lt_orderadm_i_in TYPE crmt_output_orderadm_i_in_comt,
lt_schedlin_i_cf TYPE crmt_output_schedlin_i_cf_comt,
lt_status_i TYPE crmt_output_status_i_comt,
lt_working_set_e_s_bbp TYPE /1cn/working_set_e_s_bbp_t,
lv_language LIKE sy-langu,
lo_order TYPE REF TO cl_doc_crm_order,
lv_object_guid TYPE crmt_object_guid,
lv_object_kind TYPE crmt_object_kind,
lv_status TYPE jstat,
lt_status TYPE TABLE OF jstat,
lv_error_tab_wrk TYPE ssferror,
ls_output_options TYPE ssfcompop.
DATA: IP_SMART_FORM Type TDSFNAME,
IO_APPL_OBJECT Type Ref To OBJECT,
IO_APPL_OBJECT Type Ref to CL_DOC_CRM_ORDER_H,
IO_PARTNER Type Ref to CL_PARTNER_PPF,
IS_ARCHIVE_INDEX Type TOA_DARA,
CT_ARCHIVE_INDEX_TAB Type TSFDARA,
IS_ARCHIVE_PARAMETERS Type ARC_PARAMS,
control_parameters TYPE ssfctrlop,
IS_MAIL_APPL_OBJ Type SWOTOBJID,
IS_MAIL_RECIPIENT Type SWOTOBJID,
IS_MAIL_SENDER Type SWOTOBJID,
IP_USER_SETTINGS type TDBOOL,
ES_DOCUMENT_OUTPUT_INFO type SSFCRESPD,
ES_JOB_OUTPUT_INFO type SSFCRESCL,
ES_JOB_OUTPUT_OPTIONS type SSFCRESOP.
Resultado generado: Formato PDF
data: l_pdf_xstring type xstring,
lt_lines type table of tline,
ls_line type tline,
l_pdf_len type i,
lv_exist type n,
output_data type ssfcrescl,
lp_proc_stat TYPE ppfdtstat.
Explanation: this method executes the action,
gets the medium, gets the log, reads the messages from
the log and gets the spool id from the messages. JLARIN 27/DIC/06
DATA: lv_event TYPE REF TO cl_htmlb_event_tableview,
lv_index TYPE int4,
wa_action TYPE LINE OF crmt_action_table_tab,
ls_action_obj TYPE REF TO if_action_ppf,
lr_action TYPE REF TO cl_trigger_ppf,
lr_medium type Ref to if_medium_ppf,
ls_action TYPE zcrmt_action,
lv_spoolid TYPE symsgv.
DATA:
grid type ref to cl_crm_ic_gridlayout,
GLOBAL_EVENT type string.
data: lo_trigger type ref to CL_TRIGGER_PPF,
lo_sfprint type ref to CL_SF_PRINT_PPF,
lo_typed_context type ref to CL_CRM_IC_IRECACTIONPLAN_CTXT,
lt_all_data type PPFSINPRRU.
data: lo_rp_rc type i.
DATA: lv_head_guid TYPE crmt_object_guid.
DATA: adminh TYPE REF TO cl_crm_ic_irecactionplan_cn02,
guidstring TYPE string,
guid TYPE crmt_object_guid,
action_obj TYPE crmt_action_obj_tab,
lv_object_id TYPE crmt_object_id.
DATA: request_event TYPE REF TO cl_htmlb_event.
DATA: event_data TYPE REF TO if_htmlb_data.
DATA: event_value type string.
event_data = cl_htmlb_manager=>get_event_ex( request ).
if event_data is bound.
try.
request_event ?= event_data.
catch cx_sy_move_cast_error.
clear request_event.
endtry.
event_value = event_data->event_id.
translate event_value to lower case. "#EC TRANSLANG
endif.
if event_value <> 'x1_x3_x17_x21_actionitems'.
return.
endif.
TRY.
create object lo_sfprint.
create object lo_trigger.
lv_exist = 1.
Get the header GUID
adminh = typed_context->btadminh.
guidstring = adminh->get_actionitem( 'GUID' ).
If guidstring is initial.
return.
endif.
lv_head_guid = guidstring.
CALL FUNCTION 'CRM_ORDERADM_H_READ_OW'
EXPORTING
iv_orderadm_h_guid = lv_head_guid
IMPORTING
ev_object_id = lv_object_id
EXCEPTIONS
admin_header_not_found = 1
OTHERS = 2.
CALL FUNCTION 'CRM_ACTION_GET_TOOLBAR_IL'
EXPORTING
iv_ref_guid = lv_head_guid
iv_ref_kind = 'A'
IMPORTING
et_action_obj = action_obj
et_action_fld = action_fld
EXCEPTIONS
parameter_error = 1
error_occurred = 2
error_message = 3
OTHERS = 4.
IF sy-subrc EQ 0.
LOOP AT action_fld INTO wa_action where applkey = lv_object_id.
ENDLOOP.
IF sy-subrc EQ 0.
ls_action_obj = wa_action-action.
lv_exist = 0.
ENDIF.
ENDIF.
if lv_exist is initial.
CALL METHOD ls_action_obj->get_processing
IMPORTING
ei_processing = lr_medium.
CALL METHOD lo_trigger->get_appl
RECEIVING
result = io_appl_object.
call function 'CRM_ACTION_GET_APPL_OBJECT'
exporting
iv_ref_guid = lv_head_guid
iv_ref_kind = 'A'
IMPORTING
EV_APPL_OBJECT = io_appl_object.
CALL METHOD lr_medium->execute
EXPORTING
io_appl_ref = io_appl_object "lo_appl_ref
RECEIVING
rp_status = lp_proc_stat
EXCEPTIONS
missing_arguments = 1
OTHERS = 2.
ip_smart_form = lr_medium->get_smartform( ).
ip_smart_form = 'ZIMPR_ORDEN_RASTREO'.
get the function name for this smart form
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = ip_smart_form
IMPORTING
fm_name = function_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
determine the tables of the application
CALL FUNCTION 'CRM_OUTPUT_SINGLE_READ'
EXPORTING
iv_object = io_appl_object
iv_smart_form = ip_smart_form
ir_partner = io_partner
IMPORTING
es_output_orderadm_h = ls_orderadm_h
es_output_activity_h = ls_activity_h
es_output_lead_h = ls_lead_h
es_output_opport_h = ls_opport_h
es_output_orgman_h = ls_orgman_h
es_output_pricingdata_h = ls_pricingdata_h
es_output_sales_h = ls_sales_h
es_output_shipping_h = ls_shipping_h
et_output_partner_h = lt_partner_h
et_output_payplan_d_h = lt_payplan_d_h
es_output_customer_h = ls_customer_h
es_output_cumulat_h = ls_cumulat_h
et_output_billing_h = lt_billing_h
et_output_cancel_h = lt_cancel_h
et_output_appointment_h = lt_appointment_h
et_output_billplan_d_h = lt_billplan_d_h
et_output_billplan_h = lt_billplan_h
et_output_status_d_h = lt_status_d_h
et_output_status_h = lt_status_h
et_output_srv_subject_h = lt_srv_subject_h
et_output_srv_reason_h = lt_srv_reason_h
et_output_srv_result_h = lt_srv_result_h
es_output_acs_h = ls_acs_h
et_output_orderadm_i = lt_orderadm_i
et_output_orgman_i = lt_orgman_i
et_output_pricingdata_i = lt_pricingdata_i
et_output_pricing_i = lt_pricing_i
et_output_product_i = lt_product_i
et_output_sales_i = lt_sales_i
et_output_shipping_i = lt_shipping_i
et_output_schedlin_i = lt_schedlin_i
et_output_partner_i = lt_partner_i
et_item_cstics_i = lt_item_cstics_i
et_output_customer_i = lt_customer_i
et_output_billing_i = lt_billing_i
et_output_cancel_i = lt_cancel_i
et_output_finprod_i = lt_finprod_i
et_output_ordprp_i = lt_ordprp_i
et_output_appointment_i = lt_appointment_i
et_output_billplan_d_i = lt_billplan_d_i
et_output_billplan_i = lt_billplan_i
et_output_orderadm_i_qt = lt_orderadm_i_qt
et_output_orderadm_i_in = lt_orderadm_i_in
et_output_schedlin_i_cf = lt_schedlin_i_cf
et_output_status_i = lt_status_i
et_output_wrk_set_e_s_bbp = lt_working_set_e_s_bbp
ev_language = lv_language.
control_parameters-langu = sy-langu.
control_parameters-no_dialog = 'X'.
control_parameters-getotf = 'X'.
call function to process smart form
CALL FUNCTION function_name
EXPORTING
archive_index = is_archive_index
archive_index_tab = ct_archive_index_tab
archive_parameters = is_archive_parameters
control_parameters = control_parameters
mail_appl_obj = is_mail_appl_obj
mail_recipient = is_mail_recipient
mail_sender = is_mail_sender
output_options = ls_output_options
user_settings = ip_user_settings
orderadm_h = ls_orderadm_h
activity_h = ls_activity_h
lead_h = ls_lead_h
opport_h = ls_opport_h
orgman_h = ls_orgman_h
partner_h = lt_partner_h
pricingdata_h = ls_pricingdata_h
sales_h = ls_sales_h
shipping_h = ls_shipping_h
payplan_d_h = lt_payplan_d_h
cumulat_h = ls_cumulat_h
customer_h = ls_customer_h
acs_h = ls_acs_h
billing_h = lt_billing_h
cancel_h = lt_cancel_h
appointment_h = lt_appointment_h
billplan_d_h = lt_billplan_d_h
billplan_h = lt_billplan_h
status_d_h = lt_status_d_h
status_h = lt_status_h
srv_subject_h = lt_srv_subject_h
srv_reason_h = lt_srv_reason_h
srv_result_h = lt_srv_result_h
orderadm_i = lt_orderadm_i
orderadm_i_qt = lt_orderadm_i_qt
orderadm_i_in = lt_orderadm_i_in
orgman_i = lt_orgman_i
pricingdata_i = lt_pricingdata_i
pricing_i = lt_pricing_i
product_i = lt_product_i
sales_i = lt_sales_i
schedlin_i = lt_schedlin_i
schedlin_i_cf = lt_schedlin_i_cf
shipping_i = lt_shipping_i
partner_i = lt_partner_i
item_cstics_i = lt_item_cstics_i
customer_i = lt_customer_i
billing_i = lt_billing_i
cancel_i = lt_cancel_i
finprod_i = lt_finprod_i
ordprp_i = lt_ordprp_i
appointment_i = lt_appointment_i
billplan_d_i = lt_billplan_d_i
billplan_i = lt_billplan_i
status_i = lt_status_i
working_set_e_s_bbp = lt_working_set_e_s_bbp
language = lv_language
IMPORTING
document_output_info = es_document_output_info
job_output_info = output_data
job_output_options = es_job_output_options
EXCEPTIONS
output_canceled = 1
parameter_error = 2
OTHERS = 3.
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
IMPORTING
bin_filesize = l_pdf_len
bin_file = l_pdf_xstring
TABLES
OTF = OUTPUT_DATA-OTFDATA
LINES = LT_LINES
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
others = 5.
IF SY-SUBRC = 0.
DATA: lv_string TYPE string,
lv_numguid(10) TYPE N.
lv_string = lv_spoolid.
lv_numguid = lv_object_id.
CALL METHOD op_previewspool( iv_spoolid = lv_string ).
me->op_previewspool( iv_spoolid = lv_string
lv_pdf_xstring = l_pdf_xstring
lv_guid = lv_numguid ).
ENDIF.
endif.
CATCH cx_sy_move_cast_error.
ENDTRY.
ENDMETHOD.
<b>This part send the result to a new windows and refresh a main page, but thow a error 503 ...</b>
method OP_PREVIEWSPOOL .
*{ INSERT CRDK902447 1
DATA: lv_url TYPE string.
DATA: cached_response TYPE REF TO if_http_response,
new_navegator TYPE REF TO CL_WB_NAVIGATOR_NEW_WINDOW,
new_navigation TYPE REF TO CL_BSP_NAVIGATION.
DATA: guid TYPE guid_32.
Resultado generado: Formato PDF
data: l_pdf_xstring type xstring,
display_url type string,
pagina_url type string,
display_pag type string,
V_TARGET_URL TYPE STRING,
W_APP_NAME TYPE STRING,
l_pdf_len type i.
DATA: out TYPE REF TO IF_BSP_WRITER,
lv_out TYPE REF TO cl_BSP_WRITER,
lv_context Type Ref to IF_BSP_PAGE_CONTEXT,
lv_body type string,
lv_body2 type string,
lv_guidmem(10) type n,
lv_doscmd(200),
lv_pag type xstring,
lv_back(2) type n.
IF not lv_pdf_xstring is initial.
CREATE OBJECT cached_response TYPE CL_HTTP_RESPONSE EXPORTING add_c_msg = 1.
l_pdf_len = xstrlen( lv_pdf_xstring ).
cached_response->set_data( data = lv_pdf_xstring
length = l_pdf_len ).
cached_response->set_header_field( name = if_http_header_fields=>content_type
value = 'application/pdf' ).
cached_response->set_header_field(
name = 'content-disposition'
value = 'attachment; filename = test.pdf' ).
cached_response->set_status( code = 200 reason = 'OK' ).
cached_response->server_cache_expire_rel( expires_rel = 180 ).
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_32 = guid.
DATA:
LV_HOST TYPE STRING, "Host name
LV_PORT TYPE STRING, "Port Number
LV_LOCAL_URL TYPE STRING, "URL (Relative to the Current Server)
LV_ABS_URL TYPE STRING, "URL (Absolute, incl. Protocol, Host, Port)
LV_PROTOCOL TYPE STRING, "Available Protocol
LV_servidor TYPE STRING. "Available Protocol
Construct the Target URL
CALL METHOD RUNTIME->CONSTRUCT_BSP_URL
EXPORTING
IN_PROTOCOL = 'http'
IN_APPLICATION_NS = RUNTIME->APPLICATION_NAMESPACE
IN_APPLICATION = 'crm_ic'
IN_PAGE = '**/crm_ic'
IMPORTING
OUT_ABS_URL = V_TARGET_URL
OUT_HOST = LV_HOST
OUT_PORT = LV_PORT
OUT_LOCAL_URL = LV_LOCAL_URL
OUT_PROTOCOL = LV_PROTOCOL.
CONCATENATE 'crm_ic' '/**/' INTO W_APP_NAME.
REPLACE W_APP_NAME IN V_TARGET_URL WITH SPACE.
CONCATENATE V_TARGET_URL '/' guid '.pdf' INTO display_url.
cl_http_server=>server_cache_upload( url = display_url
response = cached_response ).
lv_url = adapter->if_bsp_page~get_page_url( ).
if LV_PORT is initial.
concatenate 'http://' LV_HOST lv_url+0(61) 'default.do' into lv_url.
else.
concatenate 'http://' LV_HOST ':' LV_PORT lv_url+0(61) 'default.do' into lv_url.
endif.
lv_body2 = '<html><head><script language=JavaScript>'.
concatenate lv_body2 'window.open("' display_url '"); ' INTO lv_body2.
concatenate lv_body2 ' location.href = "' lv_url '"; </script></head>' INTO lv_body2.
concatenate lv_body2 '<body></body></html>' INTO lv_body2.
concatenate lv_body2 ' function back(){ history.back( ); } </script></head>' INTO lv_body2.
concatenate lv_body2 '<body><a href="javascript:back();">regresar</a></body></html>' INTO lv_body2.
response->append_cdata( data = lv_body2 ) .
response->set_header_field( name = 'content-type'
value = 'text/html' ). "#EC NOTEXT
response->set_header_field( name = 'cache-control' value = 'max-age=0' ). "#EC NOTEXT
response->set_header_field( name = 'Expires' value = '0' ). "#EC NOTEXT
navigation->response_complete( ).
return.
ENDIF.
endmethod.Using the search bar, it seems it's a proxy issue, but finding a simple solution did not seem apparent. Have you tried a reboot? To reboot, hold the power and home buttons at the same time for at least 10 seconds (hold past the swipe to shut down bar, should it appear) until the Apple Logo appears, then let go fo both buttons and your iPad will restart. Hopefully, this will solve the problem......
-
i installed gb3 on top of gb1, i found almost every loop appears twice in the loop browser. i then trashed the old "apple loops for garageband" folder and the old "apple loops index" folder.
after that, problem solved, but some loops are now missing in the loop browser. i've checked, the "missing" loops are still in the loop folder.
why would that happen?
how to solve?
k.Make sure Keyword BRowsing is turned off in GB's prefs. Also any loops not in the same time signature as your song won't be displayed.
-
LVM Volumes not available after update
Hi All!
I haven't updated my system for about two months and today I updated it. Now I have the problem that I cannot boot properly. I have my root partition in an LVM volume and on boot I get the message
ERROR: device 'UUID=xxx' not found. Skipping fs
ERROR: Unable to find root device 'UUID=xxx'
After that I land in the recovery shell. After some research I found, that "lvm lvdisplay" showed that my volumes where not available and I had to reenable them with "lvm vgchange -a y".
Issuing any lvm command also produced the following warning:
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
Anyway, after issuing the commands and exiting the recovery shell, the system booted again. However, I would prefer being able to boot without manual actions.
Thanks in advance!
Further information:
vgdisplay
--- Volume group ---
VG Name ArchLVM
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 3
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 1
Max PV 0
Cur PV 1
Act PV 1
VG Size 232.69 GiB
PE Size 4.00 MiB
Total PE 59568
Alloc PE / Size 59568 / 232.69 GiB
Free PE / Size 0 / 0
VG UUID SoB3M1-v1fD-1abI-PNJ3-6IOn-FfdI-0RoLK5
lvdisplay (LV Status was 'not available' right after booting)
--- Logical volume ---
LV Path /dev/ArchLVM/Swap
LV Name Swap
VG Name ArchLVM
LV UUID XRYBrz-LojR-k6SD-XIxV-wHnY-f3VG-giKL6V
LV Write Access read/write
LV Creation host, time archiso, 2014-05-16 14:43:06 +0200
LV Status available
# open 0
LV Size 8.00 GiB
Current LE 2048
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:0
--- Logical volume ---
LV Path /dev/ArchLVM/Root
LV Name Root
VG Name ArchLVM
LV UUID lpjDl4-Jqzu-ZWkq-Uphc-IaOo-6Rzd-cIh5yv
LV Write Access read/write
LV Creation host, time archiso, 2014-05-16 14:43:27 +0200
LV Status available
# open 1
LV Size 224.69 GiB
Current LE 57520
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:1
/etc/fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/mapper/ArchLVM-Root
UUID=2db82d1a-47a4-4e30-a819-143e8fb75199 / ext4 rw,relatime,data=ordered 0 1
#/dev/mapper/ArchLVM-Root / ext4 rw,relatime,data=ordered 0 1
# /dev/sda1
UUID=72691888-a781-4cdd-a98e-2613d87925d0 /boot ext2 rw,relatime 0 2
/etc/mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf block lvm2 filesystems keyboard fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
/boot/grub/grub.cfg
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod lvm
insmod ext2
set root='lvmid/SoB3M1-v1fD-1abI-PNJ3-6IOn-FfdI-0RoLK5/lpjDl4-Jqzu-ZWkq-Uphc-IaOo-6Rzd-cIh5yv'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='lvmid/SoB3M1-v1fD-1abI-PNJ3-6IOn-FfdI-0RoLK5/lpjDl4-Jqzu-ZWkq-Uphc-IaOo-6Rzd-cIh5yv' 2db82d1a-47a4-4e30-a819-143e8fb75199
else
search --no-floppy --fs-uuid --set=root 2db82d1a-47a4-4e30-a819-143e8fb75199
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-2db82d1a-47a4-4e30-a819-143e8fb75199' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 72691888-a781-4cdd-a98e-2613d87925d0
else
search --no-floppy --fs-uuid --set=root 72691888-a781-4cdd-a98e-2613d87925d0
fi
echo 'Loading Linux linux ...'
linux /vmlinuz-linux root=UUID=2db82d1a-47a4-4e30-a819-143e8fb75199 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-2db82d1a-47a4-4e30-a819-143e8fb75199' {
menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-2db82d1a-47a4-4e30-a819-143e8fb75199' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 72691888-a781-4cdd-a98e-2613d87925d0
else
search --no-floppy --fs-uuid --set=root 72691888-a781-4cdd-a98e-2613d87925d0
fi
echo 'Loading Linux linux ...'
linux /vmlinuz-linux root=UUID=2db82d1a-47a4-4e30-a819-143e8fb75199 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-2db82d1a-47a4-4e30-a819-143e8fb75199' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 72691888-a781-4cdd-a98e-2613d87925d0
else
search --no-floppy --fs-uuid --set=root 72691888-a781-4cdd-a98e-2613d87925d0
fi
echo 'Loading Linux linux ...'
linux /vmlinuz-linux root=UUID=2db82d1a-47a4-4e30-a819-143e8fb75199 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
Last edited by Kirodema (2014-07-16 07:31:34)use_lvmetad = 0
lvm2-lvmetad is not enabled or running on my system. Shall I activate it?
# This is an example configuration file for the LVM2 system.
# It contains the default settings that would be used if there was no
# /etc/lvm/lvm.conf file.
# Refer to 'man lvm.conf' for further information including the file layout.
# To put this file in a different directory and override /etc/lvm set
# the environment variable LVM_SYSTEM_DIR before running the tools.
# N.B. Take care that each setting only appears once if uncommenting
# example settings in this file.
# This section allows you to set the way the configuration settings are handled.
config {
# If enabled, any LVM2 configuration mismatch is reported.
# This implies checking that the configuration key is understood
# by LVM2 and that the value of the key is of a proper type.
# If disabled, any configuration mismatch is ignored and default
# value is used instead without any warning (a message about the
# configuration key not being found is issued in verbose mode only).
checks = 1
# If enabled, any configuration mismatch aborts the LVM2 process.
abort_on_errors = 0
# Directory where LVM looks for configuration profiles.
profile_dir = "/etc/lvm/profile"
# This section allows you to configure which block devices should
# be used by the LVM system.
devices {
# Where do you want your volume groups to appear ?
dir = "/dev"
# An array of directories that contain the device nodes you wish
# to use with LVM2.
scan = [ "/dev" ]
# If set, the cache of block device nodes with all associated symlinks
# will be constructed out of the existing udev database content.
# This avoids using and opening any inapplicable non-block devices or
# subdirectories found in the device directory. This setting is applied
# to udev-managed device directory only, other directories will be scanned
# fully. LVM2 needs to be compiled with udev support for this setting to
# take effect. N.B. Any device node or symlink not managed by udev in
# udev directory will be ignored with this setting on.
obtain_device_list_from_udev = 1
# If several entries in the scanned directories correspond to the
# same block device and the tools need to display a name for device,
# all the pathnames are matched against each item in the following
# list of regular expressions in turn and the first match is used.
preferred_names = [ ]
# Try to avoid using undescriptive /dev/dm-N names, if present.
# preferred_names = [ "^/dev/mpath/", "^/dev/mapper/mpath", "^/dev/[hs]d" ]
# A filter that tells LVM2 to only use a restricted set of devices.
# The filter consists of an array of regular expressions. These
# expressions can be delimited by a character of your choice, and
# prefixed with either an 'a' (for accept) or 'r' (for reject).
# The first expression found to match a device name determines if
# the device will be accepted or rejected (ignored). Devices that
# don't match any patterns are accepted.
# Be careful if there there are symbolic links or multiple filesystem
# entries for the same device as each name is checked separately against
# the list of patterns. The effect is that if the first pattern in the
# list to match a name is an 'a' pattern for any of the names, the device
# is accepted; otherwise if the first pattern in the list to match a name
# is an 'r' pattern for any of the names it is rejected; otherwise it is
# accepted.
# Don't have more than one filter line active at once: only one gets used.
# Run vgscan after you change this parameter to ensure that
# the cache file gets regenerated (see below).
# If it doesn't do what you expect, check the output of 'vgscan -vvvv'.
# If lvmetad is used, then see "A note about device filtering while
# lvmetad is used" comment that is attached to global/use_lvmetad setting.
# By default we accept every block device:
filter = [ "a/.*/" ]
# Exclude the cdrom drive
# filter = [ "r|/dev/cdrom|" ]
# When testing I like to work with just loopback devices:
# filter = [ "a/loop/", "r/.*/" ]
# Or maybe all loops and ide drives except hdc:
# filter =[ "a|loop|", "r|/dev/hdc|", "a|/dev/ide|", "r|.*|" ]
# Use anchors if you want to be really specific
# filter = [ "a|^/dev/hda8$|", "r/.*/" ]
# Since "filter" is often overridden from command line, it is not suitable
# for system-wide device filtering (udev rules, lvmetad). To hide devices
# from LVM-specific udev processing and/or from lvmetad, you need to set
# global_filter. The syntax is the same as for normal "filter"
# above. Devices that fail the global_filter are not even opened by LVM.
# global_filter = []
# The results of the filtering are cached on disk to avoid
# rescanning dud devices (which can take a very long time).
# By default this cache is stored in the /etc/lvm/cache directory
# in a file called '.cache'.
# It is safe to delete the contents: the tools regenerate it.
# (The old setting 'cache' is still respected if neither of
# these new ones is present.)
# N.B. If obtain_device_list_from_udev is set to 1 the list of
# devices is instead obtained from udev and any existing .cache
# file is removed.
cache_dir = "/etc/lvm/cache"
cache_file_prefix = ""
# You can turn off writing this cache file by setting this to 0.
write_cache_state = 1
# Advanced settings.
# List of pairs of additional acceptable block device types found
# in /proc/devices with maximum (non-zero) number of partitions.
# types = [ "fd", 16 ]
# If sysfs is mounted (2.6 kernels) restrict device scanning to
# the block devices it believes are valid.
# 1 enables; 0 disables.
sysfs_scan = 1
# By default, LVM2 will ignore devices used as component paths
# of device-mapper multipath devices.
# 1 enables; 0 disables.
multipath_component_detection = 1
# By default, LVM2 will ignore devices used as components of
# software RAID (md) devices by looking for md superblocks.
# 1 enables; 0 disables.
md_component_detection = 1
# By default, if a PV is placed directly upon an md device, LVM2
# will align its data blocks with the md device's stripe-width.
# 1 enables; 0 disables.
md_chunk_alignment = 1
# Default alignment of the start of a data area in MB. If set to 0,
# a value of 64KB will be used. Set to 1 for 1MiB, 2 for 2MiB, etc.
# default_data_alignment = 1
# By default, the start of a PV's data area will be a multiple of
# the 'minimum_io_size' or 'optimal_io_size' exposed in sysfs.
# - minimum_io_size - the smallest request the device can perform
# w/o incurring a read-modify-write penalty (e.g. MD's chunk size)
# - optimal_io_size - the device's preferred unit of receiving I/O
# (e.g. MD's stripe width)
# minimum_io_size is used if optimal_io_size is undefined (0).
# If md_chunk_alignment is enabled, that detects the optimal_io_size.
# This setting takes precedence over md_chunk_alignment.
# 1 enables; 0 disables.
data_alignment_detection = 1
# Alignment (in KB) of start of data area when creating a new PV.
# md_chunk_alignment and data_alignment_detection are disabled if set.
# Set to 0 for the default alignment (see: data_alignment_default)
# or page size, if larger.
data_alignment = 0
# By default, the start of the PV's aligned data area will be shifted by
# the 'alignment_offset' exposed in sysfs. This offset is often 0 but
# may be non-zero; e.g.: certain 4KB sector drives that compensate for
# windows partitioning will have an alignment_offset of 3584 bytes
# (sector 7 is the lowest aligned logical block, the 4KB sectors start
# at LBA -1, and consequently sector 63 is aligned on a 4KB boundary).
# But note that pvcreate --dataalignmentoffset will skip this detection.
# 1 enables; 0 disables.
data_alignment_offset_detection = 1
# If, while scanning the system for PVs, LVM2 encounters a device-mapper
# device that has its I/O suspended, it waits for it to become accessible.
# Set this to 1 to skip such devices. This should only be needed
# in recovery situations.
ignore_suspended_devices = 0
# ignore_lvm_mirrors: Introduced in version 2.02.104
# This setting determines whether logical volumes of "mirror" segment
# type are scanned for LVM labels. This affects the ability of
# mirrors to be used as physical volumes. If 'ignore_lvm_mirrors'
# is set to '1', it becomes impossible to create volume groups on top
# of mirror logical volumes - i.e. to stack volume groups on mirrors.
# Allowing mirror logical volumes to be scanned (setting the value to '0')
# can potentially cause LVM processes and I/O to the mirror to become
# blocked. This is due to the way that the "mirror" segment type handles
# failures. In order for the hang to manifest itself, an LVM command must
# be run just after a failure and before the automatic LVM repair process
# takes place OR there must be failures in multiple mirrors in the same
# volume group at the same time with write failures occurring moments
# before a scan of the mirror's labels.
# Note that these scanning limitations do not apply to the LVM RAID
# types, like "raid1". The RAID segment types handle failures in a
# different way and are not subject to possible process or I/O blocking.
# It is encouraged that users set 'ignore_lvm_mirrors' to 1 if they
# are using the "mirror" segment type. Users that require volume group
# stacking on mirrored logical volumes should consider using the "raid1"
# segment type. The "raid1" segment type is not available for
# active/active clustered volume groups.
# Set to 1 to disallow stacking and thereby avoid a possible deadlock.
ignore_lvm_mirrors = 1
# During each LVM operation errors received from each device are counted.
# If the counter of a particular device exceeds the limit set here, no
# further I/O is sent to that device for the remainder of the respective
# operation. Setting the parameter to 0 disables the counters altogether.
disable_after_error_count = 0
# Allow use of pvcreate --uuid without requiring --restorefile.
require_restorefile_with_uuid = 1
# Minimum size (in KB) of block devices which can be used as PVs.
# In a clustered environment all nodes must use the same value.
# Any value smaller than 512KB is ignored.
# Ignore devices smaller than 2MB such as floppy drives.
pv_min_size = 2048
# The original built-in setting was 512 up to and including version 2.02.84.
# pv_min_size = 512
# Issue discards to a logical volumes's underlying physical volume(s) when
# the logical volume is no longer using the physical volumes' space (e.g.
# lvremove, lvreduce, etc). Discards inform the storage that a region is
# no longer in use. Storage that supports discards advertise the protocol
# specific way discards should be issued by the kernel (TRIM, UNMAP, or
# WRITE SAME with UNMAP bit set). Not all storage will support or benefit
# from discards but SSDs and thinly provisioned LUNs generally do. If set
# to 1, discards will only be issued if both the storage and kernel provide
# support.
# 1 enables; 0 disables.
issue_discards = 0
# This section allows you to configure the way in which LVM selects
# free space for its Logical Volumes.
allocation {
# When searching for free space to extend an LV, the "cling"
# allocation policy will choose space on the same PVs as the last
# segment of the existing LV. If there is insufficient space and a
# list of tags is defined here, it will check whether any of them are
# attached to the PVs concerned and then seek to match those PV tags
# between existing extents and new extents.
# Use the special tag "@*" as a wildcard to match any PV tag.
# Example: LVs are mirrored between two sites within a single VG.
# PVs are tagged with either @site1 or @site2 to indicate where
# they are situated.
# cling_tag_list = [ "@site1", "@site2" ]
# cling_tag_list = [ "@*" ]
# Changes made in version 2.02.85 extended the reach of the 'cling'
# policies to detect more situations where data can be grouped
# onto the same disks. Set this to 0 to revert to the previous
# algorithm.
maximise_cling = 1
# Whether to use blkid library instead of native LVM2 code to detect
# any existing signatures while creating new Physical Volumes and
# Logical Volumes. LVM2 needs to be compiled with blkid wiping support
# for this setting to take effect.
# LVM2 native detection code is currently able to recognize these signatures:
# - MD device signature
# - swap signature
# - LUKS signature
# To see the list of signatures recognized by blkid, check the output
# of 'blkid -k' command. The blkid can recognize more signatures than
# LVM2 native detection code, but due to this higher number of signatures
# to be recognized, it can take more time to complete the signature scan.
use_blkid_wiping = 1
# Set to 1 to wipe any signatures found on newly-created Logical Volumes
# automatically in addition to zeroing of the first KB on the LV
# (controlled by the -Z/--zero y option).
# The command line option -W/--wipesignatures takes precedence over this
# setting.
# The default is to wipe signatures when zeroing.
wipe_signatures_when_zeroing_new_lvs = 1
# Set to 1 to guarantee that mirror logs will always be placed on
# different PVs from the mirror images. This was the default
# until version 2.02.85.
mirror_logs_require_separate_pvs = 0
# Set to 1 to guarantee that cache_pool metadata will always be
# placed on different PVs from the cache_pool data.
cache_pool_metadata_require_separate_pvs = 0
# Specify the minimal chunk size (in kiB) for cache pool volumes.
# Using a chunk_size that is too large can result in wasteful use of
# the cache, where small reads and writes can cause large sections of
# an LV to be mapped into the cache. However, choosing a chunk_size
# that is too small can result in more overhead trying to manage the
# numerous chunks that become mapped into the cache. The former is
# more of a problem than the latter in most cases, so we default to
# a value that is on the smaller end of the spectrum. Supported values
# range from 32(kiB) to 1048576 in multiples of 32.
# cache_pool_chunk_size = 64
# Set to 1 to guarantee that thin pool metadata will always
# be placed on different PVs from the pool data.
thin_pool_metadata_require_separate_pvs = 0
# Specify chunk size calculation policy for thin pool volumes.
# Possible options are:
# "generic" - if thin_pool_chunk_size is defined, use it.
# Otherwise, calculate the chunk size based on
# estimation and device hints exposed in sysfs:
# the minimum_io_size. The chunk size is always
# at least 64KiB.
# "performance" - if thin_pool_chunk_size is defined, use it.
# Otherwise, calculate the chunk size for
# performance based on device hints exposed in
# sysfs: the optimal_io_size. The chunk size is
# always at least 512KiB.
# thin_pool_chunk_size_policy = "generic"
# Specify the minimal chunk size (in KB) for thin pool volumes.
# Use of the larger chunk size may improve performance for plain
# thin volumes, however using them for snapshot volumes is less efficient,
# as it consumes more space and takes extra time for copying.
# When unset, lvm tries to estimate chunk size starting from 64KB
# Supported values are in range from 64 to 1048576.
# thin_pool_chunk_size = 64
# Specify discards behaviour of the thin pool volume.
# Select one of "ignore", "nopassdown", "passdown"
# thin_pool_discards = "passdown"
# Set to 0, to disable zeroing of thin pool data chunks before their
# first use.
# N.B. zeroing larger thin pool chunk size degrades performance.
# thin_pool_zero = 1
# This section that allows you to configure the nature of the
# information that LVM2 reports.
log {
# Controls the messages sent to stdout or stderr.
# There are three levels of verbosity, 3 being the most verbose.
verbose = 0
# Set to 1 to suppress all non-essential messages from stdout.
# This has the same effect as -qq.
# When this is set, the following commands still produce output:
# dumpconfig, lvdisplay, lvmdiskscan, lvs, pvck, pvdisplay,
# pvs, version, vgcfgrestore -l, vgdisplay, vgs.
# Non-essential messages are shifted from log level 4 to log level 5
# for syslog and lvm2_log_fn purposes.
# Any 'yes' or 'no' questions not overridden by other arguments
# are suppressed and default to 'no'.
silent = 0
# Should we send log messages through syslog?
# 1 is yes; 0 is no.
syslog = 1
# Should we log error and debug messages to a file?
# By default there is no log file.
#file = "/var/log/lvm2.log"
# Should we overwrite the log file each time the program is run?
# By default we append.
overwrite = 0
# What level of log messages should we send to the log file and/or syslog?
# There are 6 syslog-like log levels currently in use - 2 to 7 inclusive.
# 7 is the most verbose (LOG_DEBUG).
level = 0
# Format of output messages
# Whether or not (1 or 0) to indent messages according to their severity
indent = 1
# Whether or not (1 or 0) to display the command name on each line output
command_names = 0
# A prefix to use before the message text (but after the command name,
# if selected). Default is two spaces, so you can see/grep the severity
# of each message.
prefix = " "
# To make the messages look similar to the original LVM tools use:
# indent = 0
# command_names = 1
# prefix = " -- "
# Set this if you want log messages during activation.
# Don't use this in low memory situations (can deadlock).
# activation = 0
# Some debugging messages are assigned to a class and only appear
# in debug output if the class is listed here.
# Classes currently available:
# memory, devices, activation, allocation, lvmetad, metadata, cache,
# locking
# Use "all" to see everything.
debug_classes = [ "memory", "devices", "activation", "allocation",
"lvmetad", "metadata", "cache", "locking" ]
# Configuration of metadata backups and archiving. In LVM2 when we
# talk about a 'backup' we mean making a copy of the metadata for the
# *current* system. The 'archive' contains old metadata configurations.
# Backups are stored in a human readable text format.
backup {
# Should we maintain a backup of the current metadata configuration ?
# Use 1 for Yes; 0 for No.
# Think very hard before turning this off!
backup = 1
# Where shall we keep it ?
# Remember to back up this directory regularly!
backup_dir = "/etc/lvm/backup"
# Should we maintain an archive of old metadata configurations.
# Use 1 for Yes; 0 for No.
# On by default. Think very hard before turning this off.
archive = 1
# Where should archived files go ?
# Remember to back up this directory regularly!
archive_dir = "/etc/lvm/archive"
# What is the minimum number of archive files you wish to keep ?
retain_min = 10
# What is the minimum time you wish to keep an archive file for ?
retain_days = 30
# Settings for the running LVM2 in shell (readline) mode.
shell {
# Number of lines of history to store in ~/.lvm_history
history_size = 100
# Miscellaneous global LVM2 settings
global {
# The file creation mask for any files and directories created.
# Interpreted as octal if the first digit is zero.
umask = 077
# Allow other users to read the files
#umask = 022
# Enabling test mode means that no changes to the on disk metadata
# will be made. Equivalent to having the -t option on every
# command. Defaults to off.
test = 0
# Default value for --units argument
units = "h"
# Since version 2.02.54, the tools distinguish between powers of
# 1024 bytes (e.g. KiB, MiB, GiB) and powers of 1000 bytes (e.g.
# KB, MB, GB).
# If you have scripts that depend on the old behaviour, set this to 0
# temporarily until you update them.
si_unit_consistency = 1
# Whether or not to display unit suffix for sizes. This setting has
# no effect if the units are in human-readable form (global/units="h")
# in which case the suffix is always displayed.
suffix = 1
# Whether or not to communicate with the kernel device-mapper.
# Set to 0 if you want to use the tools to manipulate LVM metadata
# without activating any logical volumes.
# If the device-mapper kernel driver is not present in your kernel
# setting this to 0 should suppress the error messages.
activation = 1
# If we can't communicate with device-mapper, should we try running
# the LVM1 tools?
# This option only applies to 2.4 kernels and is provided to help you
# switch between device-mapper kernels and LVM1 kernels.
# The LVM1 tools need to be installed with .lvm1 suffices
# e.g. vgscan.lvm1 and they will stop working after you start using
# the new lvm2 on-disk metadata format.
# The default value is set when the tools are built.
# fallback_to_lvm1 = 0
# The default metadata format that commands should use - "lvm1" or "lvm2".
# The command line override is -M1 or -M2.
# Defaults to "lvm2".
# format = "lvm2"
# Location of proc filesystem
proc = "/proc"
# Type of locking to use. Defaults to local file-based locking (1).
# Turn locking off by setting to 0 (dangerous: risks metadata corruption
# if LVM2 commands get run concurrently).
# Type 2 uses the external shared library locking_library.
# Type 3 uses built-in clustered locking.
# Type 4 uses read-only locking which forbids any operations that might
# change metadata.
# N.B. Don't use lvmetad with locking type 3 as lvmetad is not yet
# supported in clustered environment. If use_lvmetad=1 and locking_type=3
# is set at the same time, LVM always issues a warning message about this
# and then it automatically disables lvmetad use.
locking_type = 1
# Set to 0 to fail when a lock request cannot be satisfied immediately.
wait_for_locks = 1
# If using external locking (type 2) and initialisation fails,
# with this set to 1 an attempt will be made to use the built-in
# clustered locking.
# If you are using a customised locking_library you should set this to 0.
fallback_to_clustered_locking = 1
# If an attempt to initialise type 2 or type 3 locking failed, perhaps
# because cluster components such as clvmd are not running, with this set
# to 1 an attempt will be made to use local file-based locking (type 1).
# If this succeeds, only commands against local volume groups will proceed.
# Volume Groups marked as clustered will be ignored.
fallback_to_local_locking = 1
# Local non-LV directory that holds file-based locks while commands are
# in progress. A directory like /tmp that may get wiped on reboot is OK.
locking_dir = "/run/lock/lvm"
# Whenever there are competing read-only and read-write access requests for
# a volume group's metadata, instead of always granting the read-only
# requests immediately, delay them to allow the read-write requests to be
# serviced. Without this setting, write access may be stalled by a high
# volume of read-only requests.
# NB. This option only affects locking_type = 1 viz. local file-based
# locking.
prioritise_write_locks = 1
# Other entries can go here to allow you to load shared libraries
# e.g. if support for LVM1 metadata was compiled as a shared library use
# format_libraries = "liblvm2format1.so"
# Full pathnames can be given.
# Search this directory first for shared libraries.
# library_dir = "/lib"
# The external locking library to load if locking_type is set to 2.
# locking_library = "liblvm2clusterlock.so"
# Treat any internal errors as fatal errors, aborting the process that
# encountered the internal error. Please only enable for debugging.
abort_on_internal_errors = 0
# Check whether CRC is matching when parsed VG is used multiple times.
# This is useful to catch unexpected internal cached volume group
# structure modification. Please only enable for debugging.
detect_internal_vg_cache_corruption = 0
# If set to 1, no operations that change on-disk metadata will be permitted.
# Additionally, read-only commands that encounter metadata in need of repair
# will still be allowed to proceed exactly as if the repair had been
# performed (except for the unchanged vg_seqno).
# Inappropriate use could mess up your system, so seek advice first!
metadata_read_only = 0
# 'mirror_segtype_default' defines which segtype will be used when the
# shorthand '-m' option is used for mirroring. The possible options are:
# "mirror" - The original RAID1 implementation provided by LVM2/DM. It is
# characterized by a flexible log solution (core, disk, mirrored)
# and by the necessity to block I/O while reconfiguring in the
# event of a failure.
# There is an inherent race in the dmeventd failure handling
# logic with snapshots of devices using this type of RAID1 that
# in the worst case could cause a deadlock.
# Ref: https://bugzilla.redhat.com/show_bug.cgi?id=817130#c10
# "raid1" - This implementation leverages MD's RAID1 personality through
# device-mapper. It is characterized by a lack of log options.
# (A log is always allocated for every device and they are placed
# on the same device as the image - no separate devices are
# required.) This mirror implementation does not require I/O
# to be blocked in the kernel in the event of a failure.
# This mirror implementation is not cluster-aware and cannot be
# used in a shared (active/active) fashion in a cluster.
# Specify the '--type <mirror|raid1>' option to override this default
# setting.
mirror_segtype_default = "raid1"
# 'raid10_segtype_default' determines the segment types used by default
# when the '--stripes/-i' and '--mirrors/-m' arguments are both specified
# during the creation of a logical volume.
# Possible settings include:
# "raid10" - This implementation leverages MD's RAID10 personality through
# device-mapper.
# "mirror" - LVM will layer the 'mirror' and 'stripe' segment types. It
# will do this by creating a mirror on top of striped sub-LVs;
# effectively creating a RAID 0+1 array. This is suboptimal
# in terms of providing redundancy and performance. Changing to
# this setting is not advised.
# Specify the '--type <raid10|mirror>' option to override this default
# setting.
raid10_segtype_default = "raid10"
# The default format for displaying LV names in lvdisplay was changed
# in version 2.02.89 to show the LV name and path separately.
# Previously this was always shown as /dev/vgname/lvname even when that
# was never a valid path in the /dev filesystem.
# Set to 1 to reinstate the previous format.
# lvdisplay_shows_full_device_path = 0
# Whether to use (trust) a running instance of lvmetad. If this is set to
# 0, all commands fall back to the usual scanning mechanisms. When set to 1
# *and* when lvmetad is running (automatically instantiated by making use of
# systemd's socket-based service activation or run as an initscripts service
# or run manually), the volume group metadata and PV state flags are obtained
# from the lvmetad instance and no scanning is done by the individual
# commands. In a setup with lvmetad, lvmetad udev rules *must* be set up for
# LVM to work correctly. Without proper udev rules, all changes in block
# device configuration will be *ignored* until a manual 'pvscan --cache'
# is performed. These rules are installed by default.
# If lvmetad has been running while use_lvmetad was 0, it MUST be stopped
# before changing use_lvmetad to 1 and started again afterwards.
# If using lvmetad, the volume activation is also switched to automatic
# event-based mode. In this mode, the volumes are activated based on
# incoming udev events that automatically inform lvmetad about new PVs
# that appear in the system. Once the VG is complete (all the PVs are
# present), it is auto-activated. The activation/auto_activation_volume_list
# setting controls which volumes are auto-activated (all by default).
# A note about device filtering while lvmetad is used:
# When lvmetad is updated (either automatically based on udev events
# or directly by pvscan --cache <device> call), the devices/filter
# is ignored and all devices are scanned by default. The lvmetad always
# keeps unfiltered information which is then provided to LVM commands
# and then each LVM command does the filtering based on devices/filter
# setting itself.
# To prevent scanning devices completely, even when using lvmetad,
# the devices/global_filter must be used.
# N.B. Don't use lvmetad with locking type 3 as lvmetad is not yet
# supported in clustered environment. If use_lvmetad=1 and locking_type=3
# is set at the same time, LVM always issues a warning message about this
# and then it automatically disables lvmetad use.
use_lvmetad = 0
# Full path of the utility called to check that a thin metadata device
# is in a state that allows it to be used.
# Each time a thin pool needs to be activated or after it is deactivated
# this utility is executed. The activation will only proceed if the utility
# has an exit status of 0.
# Set to "" to skip this check. (Not recommended.)
# The thin tools are available as part of the device-mapper-persistent-data
# package from https://github.com/jthornber/thin-provisioning-tools.
# thin_check_executable = "/usr/bin/thin_check"
# Array of string options passed with thin_check command. By default,
# option "-q" is for quiet output.
# With thin_check version 2.1 or newer you can add "--ignore-non-fatal-errors"
# to let it pass through ignorable errors and fix them later.
# thin_check_options = [ "-q" ]
# Full path of the utility called to repair a thin metadata device
# is in a state that allows it to be used.
# Each time a thin pool needs repair this utility is executed.
# See thin_check_executable how to obtain binaries.
# thin_repair_executable = "/usr/bin/thin_repair"
# Array of extra string options passed with thin_repair command.
# thin_repair_options = [ "" ]
# Full path of the utility called to dump thin metadata content.
# See thin_check_executable how to obtain binaries.
# thin_dump_executable = "/usr/bin/thin_dump"
# If set, given features are not used by thin driver.
# This can be helpful not just for testing, but i.e. allows to avoid
# using problematic implementation of some thin feature.
# Features:
# block_size
# discards
# discards_non_power_2
# external_origin
# metadata_resize
# external_origin_extend
# thin_disabled_features = [ "discards", "block_size" ]
activation {
# Set to 1 to perform internal checks on the operations issued to
# libdevmapper. Useful for debugging problems with activation.
# Some of the checks may be expensive, so it's best to use this
# only when there seems to be a problem.
checks = 0
# Set to 0 to disable udev synchronisation (if compiled into the binaries).
# Processes will not wait for notification from udev.
# They will continue irrespective of any possible udev processing
# in the background. You should only use this if udev is not running
# or has rules that ignore the devices LVM2 creates.
# The command line argument --nodevsync takes precedence over this setting.
# If set to 1 when udev is not running, and there are LVM2 processes
# waiting for udev, run 'dmsetup udevcomplete_all' manually to wake them up.
udev_sync = 1
# Set to 0 to disable the udev rules installed by LVM2 (if built with
# --enable-udev_rules). LVM2 will then manage the /dev nodes and symlinks
# for active logical volumes directly itself.
# N.B. Manual intervention may be required if this setting is changed
# while any logical volumes are active.
udev_rules = 1
# Set to 1 for LVM2 to verify operations performed by udev. This turns on
# additional checks (and if necessary, repairs) on entries in the device
# directory after udev has completed processing its events.
# Useful for diagnosing problems with LVM2/udev interactions.
verify_udev_operations = 0
# If set to 1 and if deactivation of an LV fails, perhaps because
# a process run from a quick udev rule temporarily opened the device,
# retry the operation for a few seconds before failing.
retry_deactivation = 1
# How to fill in missing stripes if activating an incomplete volume.
# Using "error" will make inaccessible parts of the device return
# I/O errors on access. You can instead use a device path, in which
# case, that device will be used to in place of missing stripes.
# But note that using anything other than "error" with mirrored
# or snapshotted volumes is likely to result in data corruption.
missing_stripe_filler = "error"
# The linear target is an optimised version of the striped target
# that only handles a single stripe. Set this to 0 to disable this
# optimisation and always use the striped target.
use_linear_target = 1
# How much stack (in KB) to reserve for use while devices suspended
# Prior to version 2.02.89 this used to be set to 256KB
reserved_stack = 64
# How much memory (in KB) to reserve for use while devices suspended
reserved_memory = 8192
# Nice value used while devices suspended
process_priority = -18
# If volume_list is defined, each LV is only activated if there is a
# match against the list.
# "vgname" and "vgname/lvname" are matched exactly.
# "@tag" matches any tag set in the LV or VG.
# "@*" matches if any tag defined on the host is also set in the LV or VG
# If any host tags exist but volume_list is not defined, a default
# single-entry list containing "@*" is assumed.
# volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
# If auto_activation_volume_list is defined, each LV that is to be
# activated with the autoactivation option (--activate ay/-a ay) is
# first checked against the list. There are two scenarios in which
# the autoactivation option is used:
# - automatic activation of volumes based on incoming PVs. If all the
# PVs making up a VG are present in the system, the autoactivation
# is triggered. This requires lvmetad (global/use_lvmetad=1) and udev
# to be running. In this case, "pvscan --cache -aay" is called
# automatically without any user intervention while processing
# udev events. Please, make sure you define auto_activation_volume_list
# properly so only the volumes you want and expect are autoactivated.
# - direct activation on command line with the autoactivation option.
# In this case, the user calls "vgchange --activate ay/-a ay" or
# "lvchange --activate ay/-a ay" directly.
# By default, the auto_activation_volume_list is not defined and all
# volumes will be activated either automatically or by using --activate ay/-a ay.
# N.B. The "activation/volume_list" is still honoured in all cases so even
# if the VG/LV passes the auto_activation_volume_list, it still needs to
# pass the volume_list for it to be activated in the end.
# If auto_activation_volume_list is defined but empty, no volumes will be
# activated automatically and --activate ay/-a ay will do nothing.
# auto_activation_volume_list = []
# If auto_activation_volume_list is defined and it's not empty, only matching
# volumes will be activated either automatically or by using --activate ay/-a ay.
# "vgname" and "vgname/lvname" are matched exactly.
# "@tag" matches any tag set in the LV or VG.
# "@*" matches if any tag defined on the host is also set in the LV or VG
# auto_activation_volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
# If read_only_volume_list is defined, each LV that is to be activated
# is checked against the list, and if it matches, it as activated
# in read-only mode. (This overrides '--permission rw' stored in the
# metadata.)
# "vgname" and "vgname/lvname" are matched exactly.
# "@tag" matches any tag set in the LV or VG.
# "@*" matches if any tag defined on the host is also set in the LV or VG
# read_only_volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
# Each LV can have an 'activation skip' flag stored persistently against it.
# During activation, this flag is used to decide whether such an LV is skipped.
# The 'activation skip' flag can be set during LV creation and by default it
# is automatically set for thin snapshot LVs. The 'auto_set_activation_skip'
# enables or disables this automatic setting of the flag while LVs are created.
# auto_set_activation_skip = 1
# For RAID or 'mirror' segment types, 'raid_region_size' is the
# size (in KiB) of each:
# - synchronization operation when initializing
# - each copy operation when performing a 'pvmove' (using 'mirror' segtype)
# This setting has replaced 'mirror_region_size' since version 2.02.99
raid_region_size = 512
# Setting to use when there is no readahead value stored in the metadata.
# "none" - Disable readahead.
# "auto" - Use default value chosen by kernel.
readahead = "auto"
# 'raid_fault_policy' defines how a device failure in a RAID logical
# volume is handled. This includes logical volumes that have the following
# segment types: raid1, raid4, raid5*, and raid6*.
# In the event of a failure, the following policies will determine what
# actions are performed during the automated response to failures (when
# dmeventd is monitoring the RAID logical volume) and when 'lvconvert' is
# called manually with the options '--repair' and '--use-policies'.
# "warn" - Use the system log to warn the user that a device in the RAID
# logical volume has failed. It is left to the user to run
# 'lvconvert --repair' manually to remove or replace the failed
# device. As long as the number of failed devices does not
# exceed the redundancy of the logical volume (1 device for
# raid4/5, 2 for raid6, etc) the logical volume will remain
# usable.
# "allocate" - Attempt to use any extra physical volumes in the volume
# group as spares and replace faulty devices.
raid_fault_policy = "warn"
# 'mirror_image_fault_policy' and 'mirror_log_fault_policy' define
# how a device failure affecting a mirror (of "mirror" segment type) is
# handled. A mirror is composed of mirror images (copies) and a log.
# A disk log ensures that a mirror does not need to be re-synced
# (all copies made the same) every time a machine reboots or crashes.
# In the event of a failure, the specified policy will be used to determine
# what happens. This applies to automatic repairs (when the mirror is being
# monitored by dmeventd) and to manual lvconvert --repair when
# --use-policies is given.
# "remove" - Simply remove the faulty device and run without it. If
# the log device fails, the mirror would convert to using
# an in-memory log. This means the mirror will not
# remember its sync status across crashes/reboots and
# the entire mirror will be re-synced. If a
# mirror image fails, the mirror will convert to a
# non-mirrored device if there is only one remaining good
# copy.
# "allocate" - Remove the faulty device and try to allocate space on
# a new device to be a replacement for the failed device.
# Using this policy for the log is fast and maintains the
# ability to remember sync state through crashes/reboots.
# Using this policy for a mirror device is slow, as it
# requires the mirror to resynchronize the devices, but it
# will preserve the mirror characteristic of the device.
# This policy acts like "remove" if no suitable device and
# space can be allocated for the replacement.
# "allocate_anywhere" - Not yet implemented. Useful to place the log device
# temporarily on same physical volume as one of the mirror
# images. This policy is not recommended for mirror devices
# since it would break the redundant nature of the mirror. This
# policy acts like "remove" if no suitable device and space can
# be allocated for the replacement.
mirror_log_fault_policy = "allocate"
mirror_image_fault_policy = "remove"
# 'snapshot_autoextend_threshold' and 'snapshot_autoextend_percent' define
# how to handle automatic snapshot extension. The former defines when the
# snapshot should be extended: when its space usage exceeds this many
# percent. The latter defines how much extra space should be allocated for
# the snapshot, in percent of its current size.
# For example, if you set snapshot_autoextend_threshold to 70 and
# snapshot_autoextend_percent to 20, whenever a snapshot exceeds 70% usage,
# it will be extended by another 20%. For a 1G snapshot, using up 700M will
# trigger a resize to 1.2G. When the usage exceeds 840M, the snapshot will
# be extended to 1.44G, and so on.
# Setting snapshot_autoextend_threshold to 100 disables automatic
# extensions. The minimum value is 50 (A setting below 50 will be treated
# as 50).
snapshot_autoextend_threshold = 100
snapshot_autoextend_percent = 20
# 'thin_pool_autoextend_threshold' and 'thin_pool_autoextend_percent' define
# how to handle automatic pool extension. The former defines when the
# pool should be extended: when its space usage exceeds this many
# percent. The latter defines how much extra space should be allocated for
# the pool, in percent of its current size.
# For example, if you set thin_pool_autoextend_threshold to 70 and
# thin_pool_autoextend_percent to 20, whenever a pool exceeds 70% usage,
# it will be extended by another 20%. For a 1G pool, using up 700M will
# trigger a resize to 1.2G. When the usage exceeds 840M, the pool will
# be extended to 1.44G, and so on.
# Setting thin_pool_autoextend_threshold to 100 disables automatic
# extensions. The minimum value is 50 (A setting below 50 will be treated
# as 50).
thin_pool_autoextend_threshold = 100
thin_pool_autoextend_percent = 20
# While activating devices, I/O to devices being (re)configured is
# suspended, and as a precaution against deadlocks, LVM2 needs to pin
# any memory it is using so it is not paged out. Groups of pages that
# are known not to be accessed during activation need not be pinned
# into memory. Each string listed in this setting is compared against
# each line in /proc/self/maps, and the pages corresponding to any
# lines that match are not pinned. On some systems locale-archive was
# found to make up over 80% of the memory used by the process.
# mlock_filter = [ "locale/locale-archive", "gconv/gconv-modules.cache" ]
# Set to 1 to revert to the default behaviour prior to version 2.02.62
# which used mlockall() to pin the whole process's memory while activating
# devices.
use_mlockall = 0
# Monitoring is enabled by default when activating logical volumes.
# Set to 0 to disable monitoring or use the --ignoremonitoring option.
monitoring = 1
# When pvmove or lvconvert must wait for the kernel to finish
# synchronising or merging data, they check and report progress
# at intervals of this number of seconds. The default is 15 seconds.
# If this is set to 0 and there is only one thing to wait for, there
# are no progress reports, but the process is awoken immediately the
# operation is complete.
polling_interval = 15
# Report settings.
# report {
# Align columns on report output.
# aligned=1
# When buffered reporting is used, the report's content is appended
# incrementally to include each object being reported until the report
# is flushed to output which normally happens at the end of command
# execution. Otherwise, if buffering is not used, each object is
# reported as soon as its processing is finished.
# buffered=1
# Show headings for columns on report.
# headings=1
# A separator to use on report after each field.
# separator=" "
# Use a field name prefix for each field reported.
# prefixes=0
# Quote field values when using field name prefixes.
# quoted=1
# Output each column as a row. If set, this also implies report/prefixes=1.
# colums_as_rows=0
# Comma separated list of columns to sort by when reporting 'lvm devtypes' command.
# See 'lvm devtypes -o help' for the list of possible fields.
# devtypes_sort="devtype_name"
# Comma separated list of columns to report for 'lvm devtypes' command.
# See 'lvm devtypes -o help' for the list of possible fields.
# devtypes_cols="devtype_name,devtype_max_partitions,devtype_description"
# Comma separated list of columns to report for 'lvm devtypes' command in verbose mode.
# See 'lvm devtypes -o help' for the list of possible fields.
# devtypes_cols_verbose="devtype_name,devtype_max_partitions,devtype_description"
# Comma separated list of columns to sort by when reporting 'lvs' command.
# See 'lvs -o help' for the list of possible fields.
# lvs_sort="vg_name,lv_name"
# Comma separated list of columns to report for 'lvs' command.
# See 'lvs -o help' for the list of possible fields.
# lvs_cols="lv_name,vg_name,lv_attr,lv_size,pool_lv,origin,data_percent,move_pv,mirror_log,copy_percent,convert_lv"
# Comma separated list of columns to report for 'lvs' command in verbose mode.
# See 'lvs -o help' for the list of possible fields.
# lvs_cols_verbose="lv_name,vg_name,seg_count,lv_attr,lv_size,lv_major,lv_minor,lv_kernel_major,lv_kernel_minor,pool_lv,origin,data_percent,metadata_percent,move_pv,copy_percent,mirror_log,convert
# Comma separated list of columns to sort by when reporting 'vgs' command.
# See 'vgs -o help' for the list of possible fields.
# vgs_sort="vg_name"
# Comma separated list of columns to report for 'vgs' command.
# See 'vgs -o help' for the list of possible fields.
# vgs_cols="vg_name,pv_count,lv_count,snap_count,vg_attr,vg_size,vg_free"
# Comma separated list of columns to report for 'vgs' command in verbose mode.
# See 'vgs -o help' for the list of possible fields.
# vgs_cols_verbose="vg_name,vg_attr,vg_extent_size,pv_count,lv_count,snap_count,vg_size,vg_free,vg_uuid,vg_profile"
# Comma separated list of columns to sort by when reporting 'pvs' command.
# See 'pvs -o help' for the list of possible fields.
# pvs_sort="pv_name"
# Comma separated list of columns to report for 'pvs' command.
# See 'pvs -o help' for the list of possible fields.
# pvs_cols="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free"
# Comma separated list of columns to report for 'pvs' command in verbose mode.
# See 'pvs -o help' for the list of possible fields.
# pvs_cols_verbose="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,dev_size,pv_uuid"
# Comma separated list of columns to sort by when reporting 'lvs --segments' command.
# See 'lvs --segments -o help' for the list of possible fields.
# segs_sort="vg_name,lv_name,seg_start"
# Comma separated list of columns to report for 'lvs --segments' command.
# See 'lvs --segments -o help' for the list of possible fields.
# segs_cols="lv_name,vg_name,lv_attr,stripes,segtype,seg_size"
# Comma separated list of columns to report for 'lvs --segments' command in verbose mode.
# See 'lvs --segments -o help' for the list of possible fields.
# segs_cols_verbose="lv_name,vg_name,lv_attr,seg_start,seg_size,stripes,segtype,stripesize,chunksize"
# Comma separated list of columns to sort by when reporting 'pvs --segments' command.
# See 'pvs --segments -o help' for the list of possible fields.
# pvsegs_sort="pv_name,pvseg_start"
# Comma separated list of columns to sort by when reporting 'pvs --segments' command.
# See 'pvs --segments -o help' for the list of possible fields.
# pvsegs_cols="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size"
# Comma separated list of columns to sort by when reporting 'pvs --segments' command in verbose mode.
# See 'pvs --segments -o help' for the list of possible fields.
# pvsegs_cols_verbose="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size,lv_name,seg_start_pe,segtype,seg_pe_ranges"
# Advanced section #
# Metadata settings
# metadata {
# Default number of copies of metadata to hold on each PV. 0, 1 or 2.
# You might want to override it from the command line with 0
# when running pvcreate on new PVs which are to be added to large VGs.
# pvmetadatacopies = 1
# Default number of copies of metadata to maintain for each VG.
# If set to a non-zero value, LVM automatically chooses which of
# the available metadata areas to use to achieve the requested
# number of copies of the VG metadata. If you set a value larger
# than the the total number of metadata areas available then
# metadata is stored in them all.
# The default value of 0 ("unmanaged") disables this automatic
# management and allows you to control which metadata areas
# are used at the individual PV level using 'pvchange
# --metadataignore y/n'.
# vgmetadatacopies = 0
# Approximate default size of on-disk metadata areas in sectors.
# You should increase this if you have large volume groups or
# you want to retain a large on-disk history of your metadata changes.
# pvmetadatasize = 255
# List of directories holding live copies of text format metadata.
# These directories must not be on logical volumes!
# It's possible to use LVM2 with a couple of directories here,
# preferably on different (non-LV) filesystems, and with no other
# on-disk metadata (pvmetadatacopies = 0). Or this can be in
# addition to on-disk metadata areas.
# The feature was originally added to simplify testing and is not
# supported under low memory situations - the machine could lock up.
# Never edit any files in these directories by hand unless you
# you are absolutely sure you know what you are doing! Use
# the supplied toolset to make changes (e.g. vgcfgrestore).
# dirs = [ "/etc/lvm/metadata", "/mnt/disk2/lvm/metadata2" ]
# Event daemon
dmeventd {
# mirror_library is the library used when monitoring a mirror device.
# "libdevmapper-event-lvm2mirror.so" attempts to recover from
# failures. It removes failed devices from a volume group and
# reconfigures a mirror as necessary. If no mirror library is
# provided, mirrors are not monitored through dmeventd.
mirror_library = "libdevmapper-event-lvm2mirror.so"
# snapshot_library is the library used when monitoring a snapshot device.
# "libdevmapper-event-lvm2snapshot.so" monitors the filling of
# snapshots and emits a warning through syslog when the use of
# the snapshot exceeds 80%. The warning is repeated when 85%, 90% and
# 95% of the snapshot is filled.
snapshot_library = "libdevmapper-event-lvm2snapshot.so"
# thin_library is the library used when monitoring a thin device.
# "libdevmapper-event-lvm2thin.so" monitors the filling of
# pool and emits a warning through syslog when the use of
# the pool exceeds 80%. The warning is repeated when 85%, 90% and
# 95% of the pool is filled.
thin_library = "libdevmapper-event-lvm2thin.so"
# Full path of the dmeventd binary.
# executable = "/usr/sbin/dmeventd" -
Error message: "the previously selected audio interface is not available"
HELP?!?!?!?!?
I'm stuck, and I can't go forward. Here's my issue:
I've bought a Focusrite Saffire LE, a simple firewire audio interface, for use with my Logic Express 7 (with all the latest updates). I run the setup assistant and select my saffire as the audio interface to use, and then when logic runs I get the message "the previously selected audio interface is not available" and it defaults to my Macbook Pro's internal microphone and speakers.
Just for sanity I've tested the audio interface with garageband and it's fine. My other audio apps aso run fine using the saffire as the audio interface. The setup assistant for logic has no problem finding the saffire, so why does it get rejected as soon as logic starts?!?!?
Please - this is driving me crazy.I asked Focusrite for some help, and they said it should work (which I knew) and made some suggestions. Here's their email:
"Saffire LE should work fine in Logic Express.
Try resetting your logic preferences. Go to Logic > preferences > initialise all except key commands.
Do you still have the same problem?
Do you have any other firewire devices attached?
Have you had any other interfaces installed in the past?"
All good suggestions, but so far no luck.
Has someone else got the same config as me? (15" Macbook Pro and focusrite saffire le)? -
Amplitube is not available after upgrading OSX 10.4.8 to 10.5.4
Hi I have enjoyed using Amplitube X-gear (with Amplitube 2.0, Metal, Hendrix and Amplitube Live) for months. I have upgraded to OSX 10.5.4 recently. Now only Amplitube Jimmy Hendrix is available in Logic. I installed the latest updates for Logic and now running 8.02. I have just checked Garageband... and there is no problem. The entire Amplitube set is ok, all available in Garageband. Any idea...?
I just did as you said. I have run preferences/audio units manager and re-scanned ... i had to force them to recheck. No, when I open a project that uses Amplitube Logic doesn't give me a warning about Amplitube not being available. Instead in the channel strip/inserts drop down menu/audio units/[incompatible]/IK Multimedia/Amplitube...
Funny, but it works. Is there any way i could fix this, i mean go back to normal. I don't want to have any trouble with htis when working...? -
Error on extend an internal table, but the required space was not available
Hi All,
I am trying to retrieve cost data from COVP tables, as well as the quantity, cost centre, and price unit fields from MSEG / BSEG tables. Thing is, if the AWTYP value in COVP table = 'MKPF', i have to get the data from MSEG, otherwise, I need to get it from BSEG table.
I kept getting this error message:
<i>You attempted to extend an internal table, but the required space was not available.</i>
Anyone have any idea how to make my codes more efficient?
Please help. Thanks!
Regards,
Cecilia
REPORT ZMISCY004.
TABLES : COVP, BSIS, BSEG, MSEG, MAKT, CSKU.
PARAMETERS :
P_FILE(300) DEFAULT '\sapdcdatasaprptoh.txt' LOWER CASE.
DATA MSG_TEXT(50).
DATA :
XKOKRS LIKE COVP-KOKRS,
XBELNR LIKE COVP-BELNR,
XBUZEI LIKE COVP-BUZEI,
XGJAHR LIKE COVP-GJAHR,
XPERIO LIKE COVP-PERIO,
XWKGBTR LIKE COVP-WKGBTR,
XWTGBTR LIKE COVP-WTGBTR,
XREFBN LIKE COVP-REFBN,
XREFBZ LIKE COVP-REFBZ,
XKSTAR LIKE COVP-KSTAR,
XBEKNZ LIKE COVP-BEKNZ,
XMATNR LIKE COVP-MATNR,
XBUKRS LIKE COVP-BUKRS,
XREFGJ LIKE COVP-REFGJ,
XREFBK LIKE COVP-REFBK,
XLTEXT LIKE CSKU-LTEXT,
XMAKTX LIKE MAKT-MAKTX,
XAWTYP LIKE COVP-AWTYP,
XTWAER LIKE COVP-TWAER,
XSGTXT LIKE COVP-SGTXT,
BSEG_KOSTL LIKE BSEG-KOSTL,
BSEG_MEINS LIKE BSEG-MEINS,
BSEG_MENGE LIKE BSEG-MENGE,
MSEG_KOSTL LIKE MSEG-KOSTL,
MSEG_MENGE LIKE MSEG-MENGE,
MSEG_MEINS LIKE MSEG-MEINS.
DATA : BEGIN OF ITAB_COVP OCCURS 10,
KOKRS LIKE COVP-KOKRS,
BELNR LIKE COVP-BELNR,
BUZEI LIKE COVP-BUZEI,
GJAHR LIKE COVP-GJAHR,
PERIO LIKE COVP-PERIO,
WKGBTR(15) TYPE C,
WTGBTR(15) TYPE C,
REFBN LIKE COVP-REFBN,
REFBZ(3) TYPE C,
KSTAR LIKE COVP-KSTAR,
BEKNZ LIKE COVP-BEKNZ,
MATNR LIKE COVP-MATNR,
BUKRS LIKE COVP-BUKRS,
REFGJ LIKE COVP-REFGJ,
REFBK LIKE COVP-REFBK,
LTEXT LIKE CSKU-LTEXT,
MAKTX LIKE MAKT-MAKTX,
AWTYP LIKE COVP-AWTYP,
TWAER LIKE COVP-TWAER,
SGTXT LIKE COVP-SGTXT,
BSIS_WRBTR(13) TYPE C,
BSEG_KOSTL LIKE BSEG-KOSTL,
BSEG_MEINS LIKE BSEG-MEINS,
BSEG_MENGE LIKE BSEG-MENGE,
MSEG_KOSTL LIKE MSEG-KOSTL,
MSEG_MENGE LIKE MSEG-MENGE,
MSEG_MEINS LIKE MSEG-MEINS.
DATA : END OF ITAB_COVP.
SELECT M1~KOKRS
M1~BELNR
M1~BUZEI
M1~GJAHR
M1~PERIO
M1~WKGBTR
M1~WTGBTR
M1~REFBN
M1~REFBZ
M1~KSTAR
M1~BEKNZ
M1~MATNR
M1~BUKRS
M1~REFGJ
M1~REFBK
M1~AWTYP
M1~TWAER
M1~SGTXT
M4~KOSTL
M4~MENGE
M4~MEINS
INTO (XKOKRS,
XBELNR,
XBUZEI,
XGJAHR,
XPERIO,
XWKGBTR,
XWTGBTR,
XREFBN,
XREFBZ,
XKSTAR,
XBEKNZ,
XMATNR,
XBUKRS,
XREFGJ,
XREFBK,
XAWTYP,
XTWAER,
XSGTXT,
MSEG_KOSTL,
MSEG_MENGE,
MSEG_MEINS
FROM COVP AS M1
LEFT OUTER JOIN MSEG AS M4
ON M1~REFBN = M4~MBLNR AND M1~REFBZ = M4~ZEILE AND M1~REFGJ = M4~MJAHR
WHERE M1~SCOPE = 'OCOST' AND M1~AWTYP = 'BKPF'
OR M1~SCOPE = 'OCOST' AND M1~AWTYP = 'MKPF'
OR M1~KSTAR = '972022'.
IF XAWTYP = 'BKPF'.
SELECT KOSTL MENGE MEINS INTO (BSEG_KOSTL, BSEG_MENGE, BSEG_MEINS) FROM
BSEG WHERE BELNR = XREFBN AND BUZEI = XREFBZ AND GJAHR = XREFGJ AND
BUKRS = XREFBK.
ENDSELECT.
MOVE BSEG-KOSTL TO BSEG_KOSTL.
MOVE BSEG-MEINS TO BSEG_MEINS.
MOVE BSEG-MENGE TO BSEG_MENGE.
ELSE.
MOVE ' ' TO BSEG_KOSTL.
MOVE ' ' TO BSEG_MEINS.
MOVE ' ' TO BSEG_MENGE.
ENDIF.
*GET LTEST
SELECT LTEXT INTO XLTEXT
FROM CSKU
WHERE KTOPL = 'COAA' AND SPRAS = 'EN'.
*GET MAKTX
IF XMATNR <> ' '.
SELECT SINGLE * FROM MAKT WHERE MATNR = XMATNR.
MOVE MAKT-MAKTX TO XMAKTX.
ELSE.
MOVE ' ' TO XMAKTX.
ENDIF.
MOVE : XKOKRS TO ITAB_COVP-KOKRS,
XBELNR TO ITAB_COVP-BELNR,
XBUZEI TO ITAB_COVP-BUZEI,
XGJAHR TO ITAB_COVP-GJAHR,
XPERIO TO ITAB_COVP-PERIO,
XWKGBTR TO ITAB_COVP-WKGBTR,
XWTGBTR TO ITAB_COVP-WTGBTR,
XREFBN TO ITAB_COVP-REFBN,
XREFBZ TO ITAB_COVP-REFBZ,
XKSTAR TO ITAB_COVP-KSTAR,
XBEKNZ TO ITAB_COVP-BEKNZ,
XMATNR TO ITAB_COVP-MATNR,
XBUKRS TO ITAB_COVP-BUKRS,
XREFGJ TO ITAB_COVP-REFGJ,
XREFBK TO ITAB_COVP-REFBK,
XLTEXT TO ITAB_COVP-LTEXT,
XMAKTX TO ITAB_COVP-MAKTX,
XAWTYP TO ITAB_COVP-AWTYP,
XTWAER TO ITAB_COVP-TWAER,
XSGTXT TO ITAB_COVP-SGTXT,
BSEG_KOSTL TO ITAB_COVP-BSEG_KOSTL,
BSEG_MEINS TO ITAB_COVP-BSEG_MEINS,
BSEG_MENGE TO ITAB_COVP-BSEG_MENGE,
MSEG_KOSTL TO ITAB_COVP-MSEG_KOSTL,
MSEG_MENGE TO ITAB_COVP-MSEG_MENGE,
MSEG_MEINS TO ITAB_COVP-MSEG_MEINS.
APPEND ITAB_COVP.
CLEAR ITAB_COVP.
ENDSELECT.
ENDSELECT.
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
IF SY-SUBRC NE 0.
WRITE: 'File cannot be opened. Reason:', MSG_TEXT.
EXIT.
ENDIF.
LOOP AT ITAB_COVP.
TRANSFER ITAB_COVP TO P_FILE.
ENDLOOP.
CLOSE DATASET P_FILE.Cecilia - I think your problemn is a nested select:
*GET LTEST
SELECT ltext INTO xltext
FROM csku
WHERE ktopl = 'COAA' AND spras = 'EN'.
*GET MAKTX
IF xmatnr <> ' '.
SELECT SINGLE * FROM makt WHERE matnr = xmatnr.
MOVE makt-maktx TO xmaktx.
ELSE.
MOVE ' ' TO xmaktx.
ENDIF.
MOVE : xkokrs TO itab_covp-kokrs,
etc.
mseg_meins TO itab_covp-mseg_meins.
APPEND itab_covp.
CLEAR itab_covp.
ENDSELECT.
Do you need to do the inner select for every cost element text?
Rob -
ICC Profiles Not Available in InDesign CS4
Hello all-
I have a lot of ICC profiles installed on my system (OS X 10.6.2); some are in /Library/ColorSync/Profiles/ and some are in ~/Library/ColorSync/Profiles/.
They are not available in InDesign CS4, even though every other app (including Photoshop, Illustrator and Acrobat) see them just fine.
Is this a know issue/bug with CS4 and Snow Leopard? I don't recall having this issue on my old machine.A followup to this issue:
This morning I couldn't launch Illustrator CS4, it kept crashing at launch. Scanning through the OS X crashlog I noticed 511 "Iterative Profile" errors:
### com.apple.ColorSync 0x91e1981d iterateProfilesInDirectory + 1020
I went into my /Library/ColorSync/Profiles folder and noticed there was now an alias pointing into Library/Application Support/Adobe/Color/Profiles/, which already contained an alias back to /Library/ColorSync/Profiles to get around the InDesign issue (as described above, which was working fine to this point). This created an infinite loop...
I did not create this new alias... any idea where it might have come from?
(Adobe needs to fix InDesign so it looks in the correct locations for profiles... the user shouldn't have to resort to manipulating aliases to enable profiles that are otherwise in the correct locations, and why do Adobe apps need their own profiles folder anyway????? As with their private Fonts folder, it does nothing but over-complicate matters...) -
DBMS_PROPAGATION_ADM.CREATE_PROPAGATION not available in Oracle 8i
Hi,
I need to propagate message from queue in Oracle 8i to queue in Oracle 9i.
From Oracle 9i, I am able to propagate message by creating subscriber and creating propagation by
DBMS_PROPAGATION_ADM.create_propagation.
I am using same steps to propagate message from queue in Oracle 8i to queue in Oracle 9i.
However, DBMS_PROPAGATION_ADM.create_propagation is not available in Oracle 8i.
Is there any alternate way of propagating message from Oracle 8i ?
Thanks,
Shaileshcreate a PL/SQL function in your Oracle8 database that can dequeue the message from your Oracle8 queue; this function will call DBMS_AQ.DEQUEUE to read the message object. Lets call it DEQUEUE8;
In the function, break out the object into its members (the individual scalar elements of the object type) and return those as OUT parameters. Use the function return value to tell you success or failure (eg timeout).
Now, from Oracle 9, call that procedure remotely across a database link:
declare
... variables
begin
-- loop for ever (or at least until you get a stop signal of some type)
while 1=1 loop
result := dequeue8@orcl8(p1, p2, p3, ...);
if result < 0 then
... report error
else
... pack the values p1,....p3, ... into your Oracle9 payload object, then
DBMS_AQ.ENQUEUE(...);
end if;
end loop;
end;I'll leave it to you to do the hard work!
HTH
Regards Nigel
Maybe you are looking for
-
Help can't uninstall, fix, or install itunes!
Ive tried following some of the other samples on here, but their just not working! I tried deleteing the files ect (which the computer wouldn't let me becuase they were being used somewhere else on my computer), and still NOTHING! When I try to do an
-
Exchange invite is not appearing in email (using mail)
Hi, I am using Mail under Tiger for my email system. I have just been sent an ics invite email from the office exchange server, however mail is not showing me the attachement, so I cannot add it to iCal. If I look at the raw message I can see the ics
-
Does not display contents of the "Recents" tab in Phone app.
Hi I've been having trouble recently with the tab in the Phone app called "Recents". In this tab, phone calls made and received should be listed according to date, but NO call, received or called is listed in this tab, what could be the cause of this
-
How to show now playing list on TV
Our new Sony DM Port IPod dock plays audio and video from our IPod Classic, but the "Now Playing" list does not show on the TV. Any suggestions for settings? We have tried the TV out as "on" and "off". Is there an app?
-
How to Calculate number of months between two dates
Hi All, In one of the fomr developments, I have to calculate the Number of Days Number of Months ( Considering Leap Year) provided by the dates, end user enters in the form, After going thorugh some forum discussion, I have come to know about so m