Loosing contacts in iphone 4s after updating ios7. have tried to restore backup but it shows restore cannot be done as back is corrupted. i start loosing contacts specifically when my phone battery goes less than 20%.

I am loosing contacts from my iphone 4s ever since i have update IOS7 . This specifiaclly happens when my battery life goes less than 20%.
This has happend before couple of times. But with time & after swtiching my phone ON & OFF recovered conatcs. But this time nothing is helping. Lastly i tried to restore back-up from itunes. I was not even able to do that as it show backup corrupted.
I dont know for what reason i am not able to call India call centre. PLEASE HELP!!!

you have done http://support.apple.com/kb/ts4429 this. so try going to repair place (paid) or try downgrading ios (not support on this website).

Similar Messages

  • I have iphone 4s after update ios7 "There is no SIM card installed"

    i have iphone 4s after update ios7 "There is no SIM card installed" i purchased from austuralia but now i am in egypt and i made the update here but the result my iphone not working now with any sim card
    what can i do?

    Maybe the SIM card is faulty one has not bee inserted correctly.  Take the sim out and reinsert it.  Try a different sim.  Maybe the phone was hacked to unlock it from the original carrier and when you updated it it relocked

  • Hi,i have iphone 4S, after updating ios 7, all functions are ok but i can't see my balence because when i dial to balance inquiry ( as *124

    Hi,i have iphone 4S, after updating ios 7, all functions are ok but i can't see my balence because when i dial for  balance inquiry ( as *124#) it does not respond or even say that this number is not in use. How can i sort out this problem?

    Yes lucky me . If all troubleshooting has been done in Resolve iOS update and restore errors and if you have at least taken it into a store where they could try a restore themselves then that would suggest a hardware fault with the iPhone.
    If you are out of warranty then it is correct that they would quote you an out of warranty service fee. From here it would be a matter of trying the steps above and if you have already tried then doing the service when you do have the cash.

  • I have forgotten my password and my iphone is disabled. I have tried to resetting it but every time the time is up and i think it will work it says "can't connect to iphone because password is on" how do reset my iphone 5?

    I have forgotten my password and my iphone is disabled. I have tried resetting it but every time the time is up and I think it will work, it says "cant connect to iphone because password is on" how do i reset my iphone 5?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Design Question: Can I use Rest-CsPoolRegisterState command in order start Front End Service when Quorum is lost and less than 85% of FES are available?

    Hi, 
    Assuming below setup for Enterprise edition Lync 2013
    Single Pool Stretched architecture with 4 FES servers
    Site A Data Center
    Site B Data Center
    FES
    2
    2
    SQL
    1 Primary
    1 Mirror
    Fact: In a situation when we lose network connectivity to Site A DC, and due to less than 50% FES servers, Quorum will be lost and as a result Front End Service will stop after 5 minutes. 
    The question is, would I be able to do a manual intervention by using this command
    Reset-CsPoolRegistrarState –PoolFqdn <pool name fqdn> –ResetType QuorumLossRecovery , and start FES with just 2 FES servers in Site B DC and 1 SQL
    Server?
    The reason I am asking this question is because it is mentioned in one of the Lync manuals that at least 85% of the servers must be available to recover once the Quorum has lost. The same manual also mentions to use above
    mentioned command in order to recover from Quorum Loss despite the fact that the lost FES servers are still not available.
    Thanks in Advance

    Hi,
    In Lync server 2013 Stretched pools are not supported for the Front End, Edge, Mediation, and Director server roles. It need two Lync pools.
    If one pool fail to connect, An administrator can declare an emergency and fail over the pool to the backup pool.  That is done by using the:
    Invoke-CsPoolFailover –PoolFQDN <Pool fqdn> –DisasterMode –Verbose
    More details:
    http://blog.avtex.com/2012/07/26/understanding-lync-2013-server-failover/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
    found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Problem with my iPhone 4S after update iOS7

    My iOS7 update is really slow and renders the phone useless. I cannot type an viber massage or facebook status or anything that requires using the keyboard as the lag and delay is around 10-15 seconds. Its really annoying. What can I do to fix?

    Thank you so much!!!  I was getting ready to restore from my last backup in April just to get my phone back.  The update rendered my phone basically useless and your solution worked the very first time. 

  • I have iphone 5S after update of 8.0 and 8.0.2 t consume battery very much( only 3 hrs backup). Plz give some solution.Now i am going frustrated from Apple

    I have iphone 5S after update of 8.0 and 8.0.2 t consume battery very much( only 3 hrs backup). Plz give some solution.Now i am going frustrated from Apple

    I'm not sure, but I know it's not recommended to upgrade to iOS 8 on anything older than an iPhone 5. I only lost my music playlists and music that was on my phone, but that music is also on my iTunes, not the playlists though, and I don't want to go through ALL my iTunes library to fix it either... But it seems I don't have a choice right now.
    Whatever you do, do NOT upgrade to iCloud Drive, keep iCloud till OS X Yosemite comes out, if your computer is a Mac. I also just noticed that all my documents on my phone are gone from Pages, BUT if I go on the iCloud website they are still there. Hopefully it will all work itself out when I can update my macbook pro to OS X Yosemite.
    If you backed up your phone and all your purchases off your iPhone prior to trying to upgrade you should be fine... But I'm not even remotely sure.

  • I don't know icloud user name&password to login iphone after update ios7

    I don't know icloud user name&password to login iphone after update ios7.
    I try to recovery apple i.d., but nothing.
    I called Thailand service support 001800 4412904.
    He advise me to goto http://expresslane.apple.com/, and send issue form to apple service.
    I wait more than a week, but no reply.
    I have purchased invoice and iphone package to confirm this phone is not stolen.
    How could I do?
    Thank you for your time to reply.

    Unfortunately, the contacting Apple's express lane is all you can do, if you had no luck to reset your password on http://iforgot.apple.com/

  • HT1386 I HAVE A PROBLEM WHEN SYNC CONTACTS IN MY COMPUTER TO IPHONE 4S after update to iOS6. The message are " waiting for change to be applied".

    I HAVE A PROBLEM WHEN SYNC CONTACTS IN MY COMPUTER TO IPHONE 4S after update to iOS6. The message are " waiting for change to be applied".
    PLAESE advise how to solve this problem.

    Hi applerinneedforhelp,
    Thanks for visiting Apple Support Communities.
    If iTunes is asking you to authorize the computer, and you've already done so, the troubleshooting steps in this article can help:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Regards,
    Jeremy

  • Mute button is not working on my iPhone 4 after updating to IOS7

    Hi,
    Mute/Silent button is not working on my iPhone 4 after updating to IOS7. When I make my phone silent using that sliding button on the side, the phone toggles between mute/unmute position automatically and settles in unmue position. Then it will change state again if I shake the mobile. Did anyone face this issue?

    I have this problem too - and it is on a BRAND new iPhone 6 - I have definitively tracked the issue to the moment I upgraded to iOS 8.1.2 - and am beyond frustrated. No fix to tell you about, sorry…but you can read my post here if you are into the whole "misery loves company" thing: iOS 8.1.2 Cellular data problem (Definitive - maybe)

  • TS1398 After update iOS7, my iphone 4s not able to connect any Wi-Fi. I tried all the possible ways, but faild.

    After update iOS7, my iphone 4s not able to connect any Wi-Fi. I tried all the possible ways, but faild.

    Settings > General > Reset > Reset Network Settings

  • I have the IPhone 4 , after updating the software to version 5.0 , i can't edit my contacts, is it only from my device or the updated software should be adjusted?

    I have the IPhone 4 , after updating the software to version 5.0 , i can't edit my contacts anymore(the button edit doesn't exist anymore), is it only from my device or the updated software should be adjusted?

    That's exactly right.  And since you have a MacBook Air (as I do), that means the synching should occur just fine (if you've set it up right in iTunes).  In other words, once you actually do the update, the iTunes on your MacBook Air will re-sync your photos back to your iPhone.
    Basically, the process is that your iPhone gets backed up, wiped clean, then the new iOS version gets installed, then the backup gets restored.  That will restore everything in the article above, which does not include your photos.  But the sync process that happens after the iOS installation would restore your photos from iPhoto given you've set it up that way in iTunes.
    When you have your iPhone plugged into iTunes, while looking at the iPhone's summary page, click "Photos" on the right side of iTunes to see how you have your sync set up.
    Regardless, it sounds like you'll be fine!  Your photos will wind up in iPhoto once you place them there.  They will be safe there.

  • Battery on iphone 4 after update to ios 6

    The battery of my iphone 4 after updating on ios 6 started to be discharged quickly!

    I am seeing the exact same thing on iOS 6.0.1 on my iPhone 4 and iPhone 4S.
    Steps to reproduce:
    In Settings:General:Celluar, check to be sure the following is off:
    iCloud Documents
    iTunes
    Passbook Updates
    Reading List
    Check back to the same screen after 5 minutes (while not on Wifi) and iCloud Documents is back on.
    It's burning through data like mad.
    I know I could kill iCloud on my devices or turn off Cellular data, but neither is a solution.
    Apple, are you aware of this? I think most people assume that users just don't know how to turn this off. That's not the case, it's coming back on by itself.

  • HT4623 i have dought if my iphone 4 will not work properly, as i heard it become slow after update ios7 , can someone help me out what to do.. ?

    i have dought if my iphone 4 will not work properly, as i heard it become slow after update ios7 , can someone help me out what to do.. ?

    Hello there, morganbailey02.
    The following Knowledge Base article provides some great steps for troubleshooting your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

  • Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty

    Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??

    Hello HaithamOkeely,
    We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Allen

Maybe you are looking for

  • JSR-168 Portlet code generation 'hangs' in JDev 10.1.3.2.0/JDK 1.6

    Yes, I know JDK 1.6 is not officially supported by JDeveloper 10.1.3.2.0..... However up until now stability has been reasonably fair of the IDE - beside the occasional 'out-of-synch' status of JDeveloper, which so it seems still hasn't but fully res

  • File to Mail scenario? File not received only namespace

    Hi, I tried to do file to mail scenario. I read blogs and forum questions before posting this. My problem is that I am sending.dat file in file to mail scenario. I used XIPAYLOAD and without Mail adapter When i received mail it contains attachement U

  • Raster Effects Settings and Effects Size Relationship

    Hi, I've noticed when one of my colleagues has created a concept file with RES set to 72dpi, when I go to change the settings to 300dpi, the size of the effects changes. This kinda makes sense to me so I just go in and multiply the effects by 4 to ge

  • Getting iTunes Setup Asssistant "Download Album Artwork" Message On Startup

    I have upgraded to version 7. Now everytime I start iTunes I get a 'iTunes Setup Assistant' box pop-up talking about downloading album artwork. I then have to click cancel or OK before iTunes loads. This is very, very irritating. How do I stop this??

  • Problems publishing to Facebook and Flickr

    I have been happily publishing collections to Flickr and Facebook since lightroom 3 came out and recently they have both stopped working. I think the problems happened after I changed the structure of  some of my keywords. From memory, I had two keyw