Losing wireless connectivity WRT160NL

i have an WRT160NL for over a year now. Worked fine till a couple of days ago.
al my wireless devices loose connectivity.
2 Dell laptop's
a PB pc
a PB netbook
a HTC android
a Apple Ipod
basicly all devices.
But the router is still working. I have a wired pc and that one is working fine.
Internet connectivity still exists.
Only when i reset the router, the wireless comes back online.
I am the only 1 on the channel, use WPA2
anyone any ideas ?
Thanks,

i thought of that. I have changed to different channels. Tried a wireless scanner to determine the right channel.
No luck. None of the different channels fixed the problem.
Changed wireless parameters, No luck.
When i start a 'ping -t 192.168.1.1' on a wired device the response from the router isn't constant.
Most of the time the response time is <1ms. But sometimes (when the problem starts) the responsetime differs from 400 ms to 2000ms.
When a device loses it's connectivity the SSID is still visible on the different devices. But it is not possible to connect.
Win7 reports 'trying to authenticate' other OS'en don't report a thing.
The device is 6months old. And did run till last week without a problem.

Similar Messages

HP Officejet Pro 8600 Plus losing wireless connectivity, cannot scan to computer

In our office, we have roughly 4 computers using the HP Officeject Pro 8600 Plus, all of which are connected wirelessly. The printer was previously connected to the internet wirelessly with no problems. A couple of days ago however our computers started randomly disconnecting. The printing function would work for a bit, then disconnect. I found the only solution to this problem was to hit the button on our wireless router that resends the wireless signal out for connectivity.
We hardwired the printer with an ethernet cable and I myself didn't see any further problems regarding connectivity but a couple of the other computers had spotty connections. Again, each time this can be remedied by hitting the button on the wireless router.
Today however we had an additional problem, after trying to scan a document through the automatic document feeder, the printer said it was jammed (although it wasnt). When we went to rescan, the scan to computer function was no longer working. I can scan by hitting the scan button on my HP Printer Assitant interface, and I can also scan to email, but cannot scan to computer.
I have gone through several forums and haven't been able to find a solution. I personally use Windows 8, but other people in our office are using older versions of Windows. We've tried unplugging, restarting, hardwiring, resetting wireless settings, uninstalling, etc. etc. Before a few days ago the pritner was working fine for a number of months.
If anyone has any ideas they would be greatly appreciated.

Hi rtaw,
Welcome to the HP Forums!
I understand that you cannot scan to computer, and that you are losing wireless connectivity, with your HP Officejet pro 8600 Plus. I am happy to help you with this issue!
Please take a look through this wireless guide. Printer Does Not Maintain Wireless Connection.
For the scanning, please see this guide. A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning.
Hope this information helps you, and let me know if you have any more issues!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Airport extreme losing wireless connection with Time Capsule

I have a 1st gen Time Capsule acting as my home wireless network base station which is configured to allow the wireless network to be extended. It is also the sole DHCP server. I have a 4th gen Airport Extreme in Extend a Wireless network mode. Everything was running ok for several months. However, since I upgraded both devices to Version 7.6, the Airport extreme keeps losing its connection with the network every few hours, requiring a daily reboot. Since the problem occured, I have disabled MAC address Access Control on the Time Capsule, and allocated a reserved DHCP IP address for the Airport Extreme - but this has not solved the problem.
Does anyone have any ideas?

I had exactly the same problem. I also think it's a bug in 7.6. It seemed solved by downgrading my Time Capsule (TC) and my Airport Extreme (AE) to 7.5.2. To do so start the Airport Utility (in your /Applications/Utilities folder). Double click on the TC or AE. In the Menu at the top on your screen go to "Base Station" --> "Upload Firmware..." and the select 7.5.2. After rebooting your device, downgrade the other. Hopefully your problem is solved as well!

Brand new touch smart 520 losing wireless connection randomly

i have a brand new touch smart 520 and it is constantly losing wifi connection. it is only about 20 ft away from router so it is not a distance issue. it is also not my router because my phones and my laptop do just fine.. it is saying i have the latest drivers. what do i do now.. dont want to have to deal with this everyday!
thanks

if it is new return it

IPhone 4/iPad (Gen 1) randomly losing wireless connection

Hi
I have an iPad and iPhone 4 both with latest software (4.3.4) - over the last week or so I have noticed that my wireless connection on both devices seems to randomly drop out and I have to turn wifi off then on again from the device and I'm connected again (until it drops out again) - I would probably do this at least 5 times a day and it's getting annoying
As well as turning wifi off and on i have also tried the following, but the connection still keeps dropping:
reset network settings within settings
renew lease within wifi networks settings
turned off bluetooth
Changed to just WPA only and WPA2 only wireless security protocols (instead of WPA2/WPA combined) through modem
Rebooted modem
Changed wireless channel through modem
Now just for the record, before this issue started I ALWAYS had stable connection on both devices, I have not changed any connections or hardware on my network since this problem began - also, I know there is absolutely nothing wrong with my wireless signal being broadcast from my modem because I have a Macbook Pro (2010) and a Macbook Air (recently released model) that both connect wirelesly and the connection to both are rock solid (so when my IOS devices are not connecting my Macbooks are still connected and online without a hitch)
Also, the wireless icon on both devices show full strength when they are not connecting
Has any of the Apple gurus out there had this issue and been able to resolve it? If you could let me know how you achieved this I would be eternally grateful
Thanks
Regards
VFP

Presumably you have a modem/router combination?
Since you have two devices exhibiting this problem (which they did not previously have) this points to your router having developed a problem despite the fact that some other devices still seem to work with it. You, in fact, do NOT know that there is nothing wrong with your router because some devices can still connect to it. They should all connect to it if it were working correctly.
Test your iPad and iPhone on some other networks to eliminate the small probability that both have failed at exactly the same time. If they function well on other networks then replace your router (as an alternative you could try doing a factory reset of your router to see if this fixes the problem - see your router documentation to see how to do a reset. If this is a router/modem combo you should check with your ISP)

Losing wireless connection with MacBook Pro

My wireless connection is interrupted every five to ten minutes and I am not sure why. If I turn off airport and turn it on again it works for a few more minutes, but then goes back out again. I have power cycled the modem and router (Belkin) to no avail. My roommate doesn't have the problem, but he is using a PC, so I am not sure where the problem lies.

id try this, from finder select go>computer>mac hd>library>preferences>take the folder called system configuration and put it on the desktop then restart and try again.
hope that works for you!

Losing wireless connection with Time Capsule

Hi,
Yesterday I purchased a 500GB Dual Band/Guest Networking Time Capsule (the newest model). The TC set up properly - I have it set up to join my wireless network and share my external HD - but during backups or streaming media from the external HD, it loses the wireless connection and stops. At this point, the TC is no longer viewable in the AirPort Utility and I have to reboot it.
I've read other articles and threads stating that downgrading to the 7.3.2 firmware version will correct problems like this, but because mine is a newer TC version, I can't do this (7.4.0 is the earliest available). Is there any way to solve the constant wireless connection loss?

Leask, welcome to the discussions!
The problems that you are experiencing are likely a combination of signal strength and interference from other networks and possibly cordless phones. You will need to experiment to find the best settings for your environment as there are no set rules or fixes for any given situation.
Assuming that security settings are compatible within a network, good wireless performance depends on two main factors: adequate signal strength and lack of interference from outside sources and other networks.
Download iStumbler, www.istumbler.net, to get a look at your wireless network. The application will show you the signal strength of your network (and noise).
If you have a laptop, move around your house to see how the signal strength at various points changes. If you find an area where the signal strength really starts to fall off rapidly, you either need to move your device closer to the broadcast point or consider purchasing an AirPort Express to "extend" the broadcast power of the Time Capsule.
The signal strength indicator on your computer(s) or iPhone is generally not a very good indicator of the actual signal strength on your network.
Perhaps more importantly, see if there are other networks in your area and identify what channels they are operating on. This is a primary source of interference in addition to cordless phones, microwave ovens, and some security cameras.
If you find that there are other networks using the same channel or an adjacent channel as your network, use AirPort Utility to change the channel that Time Capsule is broadcasting on to another channel that is as far away from other channels as possible. This may be very difficult if you live in an area crowded with other networks.
There are also features on many new wireless routers that enable a user to "hide" the network name, so it is possible that there are other wireless networks causing interference that you cannot identify.
Your Time Capsule is capable of broadcasting a wireless signal at 5GHz, much higher than the normal crowded 2.4GHz networks. But, I'm not sure if your computer(s) are compatible with this setting. Wouldn't hurt to give this a try. A number of users have found that they have much less difficulty on the higher band since it is (for now) much less crowded.
Please post back on your progress.

Hp 3056a keeps losing wireless connection???

1. Product Name and Number
HP Deskjet 3056A
2. Operating System installed (if applicable)
Windows Vista 32-bit
3. Error message (if any)
no connection
4. Any changes made to your system before the issue occurred
none
I have this printer installed over a wireless network. It works great. The only issue I am having is keeping a connection. I have checked to make sure the auto-off feature is not enabled...and it isn't. HP print and scan dr shows it is connected. All other areas is showing it is connected to the network...but the wireless light is still flashing? I have tried changing the wireless ip settings to manual instead of automatic but it hasn't helped at all. when the light starts flashing, the only way I can get it back online is to shut it down the restart it. the last time I shut it down I got an error message on the printer screen - 0X02A6C2ED. I started it back up and it was working fine. I have not had a chance to research this error yet, but will be doing so in a little while.
Does anyone have any ideas what to do to be able to keep a connection? I have tried all the steps listed on the HP support page (unless I overlooked one), but none of them seem to have worked. Any help would be appreciated.

Hi DannyWard
Reset the printer network defaults first. On the printer touch the setup icon, wireless, settings, restore defaults. I would also power reset the router.
I would suggest going through this document for troubleshooting a wireless connection.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03581747&tmp_task=solveCategory&cc=us&dlc=en&la...
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

IBook losing wireless connection intermittently

System is an iBook Dual USB that was purchased new a few years ago along with the original Airport card.
Just yesterday, the machine started intermittently losing connection to my access point (a belkin model) which had caused no problems for over a year.
Symptom is that all the "bars" go grey within a couple of minutes of boot, then sometimes come back to all black. But then again, sometimes it never comes back. In the Networks panel in System prefs, it shows airport as on, but not connected to a network.
The only other notable event, was that I loaded the two security updates for 2007 yesterday before the trouble started.
Removed and reseated the airport card a couple of times. Apple Hardware diagnostics show no problems even when run looping for over an hour. Ran disk utility to fix all permissions.
Per some webpostings, it was suggested that some system updates can mess up some .plist files related to networking -- Have deleted those, and still suffering from the same problem.
Other computers in the household have no problems connecting to the wireless access point, so the problem is localized to the iBook.
How do I know if I have a hardware problem (bad card), or some software corruption that is mimicing a hardware problem ?
Thanks,
Roger

Possible sources for the original AirPort card (links last checked May 7, 2007):
http://www.synaptech.com/catalog/index.php?mainpage=index&cPath=4953
http://www.expercom.com/productdetail.html?PRODUCTID=305851
http://www.powerbookguy.com/xcart/catalog/Airport-Cards-price0-p-1-c-507.html
http://store.macsolutions.com/airportad.html
http://memorysolutions.com/memorysolutions/orapaica1.html
http://store.airportcardsdirect.com/
http://techrestore.com/xcart/product.php?productid=16174
http://www.dvwarehouse.com/Apple-Original-AirPort-Wireless-Card-802.11B-p-31366. html
http://www.megamacs.com/v1/?action=view&pid=967052
http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=10061
Some places offer a 6-month warranty on the card.

"Unable to connect to hidden network" - Losing wireless connection on 1 PC in network - EA4500

We have a two-month old EA4500 router. Over the last couple of days one of our wireless pc's (running Windows 7) has occasionally been losing connection to our wireless network. Troubleshooting indicates that it is "unable to connect to the hidden network (our network name)" Our network should not be hidden, and our 2 other wireless devices are not experiencing this issue. When the disconnect occurs, the only way we are able to reconnect the PC is to disable and reenable the wireless adapter through device manager, or pull the adapter out of the USB and re-insert it. (The USB wireless adapter is also new - only a month old and is also a Linksys ). Does anyone have an idea what could be causing this issue, and what we can try to fix it? It's getting very annoying. Thanks!

There are times that these USB adapters (especially those Wireless Network Adapters) requires more power and they can't draw enough power once plugged in to a USB hub or USB extension cables. Can you try to plug it in directly to a USB port at the back of your computer? So that the adapter would draw enough power from the motherboard.
If everyone needs to believe in something, I believe I'll have another beer..

Losing wireless connection with my airport express with my powerbook G4

Lately I've been losing my wireless signal from my powerbook G4 to my airport express. The light on my airport express still shows as green, so I was wondering if the trouble lied in wither the airport express or my mac? I'm running on the 6.2 version that mac had offered as an update for the express.
The signal returns if I shut down my mac, and then turn it back on, as well as unplugging the airport express and replugging it in as well. This is starting to occur now once a day at least.
I keep my powerbook in the same room as the airport express, and it is usually in fact sitting on my desk above it...so range isn't really an issue.
This is getting tedious, and would like to know how to nip this in the bud.
Please be detailed in your responses. I'm not to tech savey. Thanks.

Lately I've been losing my wireless signal from my
powerbook G4 to my airport express. The light on my
airport express still shows as green, so I was
wondering if the trouble lied in wither the airport
express or my mac? I'm running on the 6.2 version
that mac had offered as an update for the express.
The signal returns if I shut down my mac, and then
turn it back on, as well as unplugging the airport
express and replugging it in as well. This is
starting to occur now once a day at least.
I am also experiencing the same problem, also only since recently updating my AE firmware. I will provide a bit more information so that maybe someone will be able to offer some suggestions.
I have one AE connected to a BT Broadband modem. My iMac is down the hall, connected to the AE for internet and for Airtunes. What I experience is that I will lose connectivity to the airport itself. In fact, sometimes I can actually watch as my airport signal indicator in my menu bar jumps up and down repeatedly (although sometimes the airport signal just disappears altogether and then when I go looking for it in my Airport menubar, my network is no longer listed). The green light on my AE always stays constant when this happens (even when the airport signal goes away completely). The BT modem seems to be fine.
AE basestation firmware is V6.3.
I am connected to my AE using WPA Personal (anyone know what the Group Key Timeout option does? Mine is set at 60 minutes by default... no idea if that is connected to my issue, but I didn't want to play with it since I don't know what it does).
Channel: Automatic, Closed Network. Access Control is enabled so that only my iMac can access the network. Airtunes is enabled.
Under wireless options, multicast rate is 1, interference robustness is not enabled, and transmitter power is 100%.
Anyone have any ideas about what the problem is and what I can do to try and fix it?
Thanks.
G4 iMac 800 MHz Mac OS X (10.4.4) 1 GB RAM

How can I fix my MacBook Pro losing wireless connectivity with Epson Stylus NX625 printer. It will work once and then I get an error saying the printer is not connected.

I can connect to my Epson Stylus NX625 through my wireless network and print a page or two, but then the next time I go to print it says that the printer is not connected. Any fixes? I have tried deleting the printer and re-adding it to my MacBook Pro OS X version 10.9.4, but sometimes it doesn't even find it, and other times it says it is connected, but when I go to print it says not connected. Very frustrated. I have also installed the latest drivers, etc.
What now?

Your computer is going to run hot while playing CPU/GPU intensive games - it should heat up and the fans should be noticably loud. As to why it's 'crashing' - can you post a kernel panic log? You may have some third-party kexts that are causing the problems.
Clinton

WRT110 losing wireless connectivity periodically

My new WRT110 loses all wireless (and wireless only) client connectivity just abougt everyday. It just drops out and is no longer an observable wireless network. A quick reboot of the router fixes it but that's a quick reboot I don't want to do.
I use WEP128 and I have one static IP assisgned to a print server. Otherwise all settings are default. I don't have automatic WiFi protected setup but instead configure it manually. Should the 'WiFi protected setup' radio button be on or should the 'manual' radio button be on? In either case it reports being configured.
PS: latest firmware.
PPS: Does high wireless client load kick wireless out of an active state? I have a number of wireless clients including 3-4 PC's and 2 iPods. One PC is usually running bittorrent.

I just got off a chat with Tech Support and they recommended to uncheck anonymous requests upstream to verify if the router is failing to renew with the ISP. This is kind of a nonsequitor since that's not the problem. Wired connections work fine.
The other thing TS recommended was to Wireless settings, switch to manual (more on this later!!!!!) and check the settings, Switch to Standard Radio Band, which auto-disables wide band, then go to the standard channel setting and set it to the highest value: Channel 11 - 2.462Ghz.
We are in wait and see mode.
I would like to add that on this tab - EACH AND EVERY TIME you log into the router, you will see the WiFi Protected Setup features displayed NOT the manual ones you just plugged in. They are saved and if you switch to Manual again by hand you will see them but it's uncomfortable watching your router 'forget' what it was supposed to be set to.

Losing wireless connection with Netgear WG111

Hi all,
during these few days I'm having a *very* frustrating problem.
My wireless dongle keeps disconnecting from the router, and there's no way (that I know of) to bring it back online except from rebooting. What I try to do is restarting the network or stopping the network and dhcpcd the interface. None of those work.
I have no idea of what might be causing this, what and where should I check?
Also, is there any other way to reconnect without rebooting?
Thanks a lot

Everything is set up correctly in my rc.conf, that's why I was wondering why restarting the network wouldn't work. I'll try to see if there's any tutorial on wicd, and hope it will work for me, thanks
Edit
Ok, I have installed wicd, but it doesn't work for me. I can see my router, but can't connect to it when I click on "Connect". I don't understand why... Perhaps I should give a look to NetworkManager...
Edit²
NetworkManager doesn't seem to be the solution for me, since it seems to be working only as a dock app for either Gnome or KDE. I am a Ratpoison user, and have no use of a dock app. I have tried it without the actual gnome-network-manager thing, and it didn't connect me automatically... I wonder what else is there for me...
Last edited by finferflu (2007-11-01 00:12:10)

IMac losing wireless connection when new wireless device is added.

I have a new 2.4 G iMac and have a 5.1 logitech surround set-up with wireless speakers. anytime i turn the speakers on and i'm using my wireless internet, the internet sits; when i turn the speakers off, the internet works as it should.sounds like there's problem with the wireless.

- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- In there, you should be able to navigate around to find a sleep timer. Some printers have the setting available to the user, some do not. I am not sure on your model.
While you are in there, you might as well set a static IP address:
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address). If you do not know this, enter the current IP address.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Leave the gateway and DNS blank. Click 'Apply'
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Losing wireless connectivity WRT160NL

Similar Messages

Maybe you are looking for