LOSS OF ACTIVITIES OPEN. NWDI

regards,
I am modifying a standard ESS applications. While making a checkin activity modifications, vpn connection lost. When NWDS restores the activity did not appear in either "open" or "closed" and appeared multiple syntax errors because they lost the link between the server NWDI and NWDS.
It has the support of the modifications. My question is: How can update the NWDI server having these backups?
Thank you very much for your help!

Thank you all.
Vivek: When I go to CBS and try to find activities, I get a communication error. With help from a basis we could not detect what is wrong. I am attaching the error screen:
http://www.freeimagehosting.net/qmh1a
Part of the log is as follows:
http://www.freeimagehosting.net/j37yl
John: By the time the VPN goes down I do not have any activity, so I can not checkout. The draft code has many errors right now, I can not do checkin, just build. When you build, no errors are corrected.
Arun: Similar to what I say to John, I can not do checkin of a new activity because there are many syntax errors. With respect to TCS / Deployer when you submit I get an error 400. I appreciate the information you can give me.
http://www.freeimagehosting.net/c3whb
http://www.freeimagehosting.net/4wnfi
The "team basis" should enable the service?
regards,

Similar Messages

  • Activation of Activities in NWDI

    Hi I am facing a problem in Activation of Activities in NWDI.
    Here is the Error Log Whenever I am trying to Activate the Activity
    =======================================================
    INVALID dependency is declared to public part: ejbjar.
    Change request state from PROCESSING to FAILED
    ERROR! The following problem(s) occurred during request processing:
    ERROR! The following error occurred during request processing:Activation failed due to component "sap.com/crm/isa/web/b2b" variant "default". The component is BROKEN.
    =======================================================

    Hello Akshatha
    Thank you for help
    This error occurs for all activities activated by different applications.
    I did tests generating activities with Web Dynpro applications that have no problems and are in the portal and these also generated the same mistake
    All this happens after applying the SP21 to the portal.
    What could have happened? How can I correct this mistake?
    Thanks and Regards,
    Carlos Madrid

  • How to revert the released activities from NWDI

    Hi everyone,
    By mistake wrong activities are released from NWDI track.Now we want them to revert back so that we revert back to actual source code.
    Is it possible to revert the released activities from NWDI (CMS or CBS) ?
    if not what process we have to follow to get it ridoff the unwanted activities ?
    Regards,
    Govindu
    Edited by: Govindu Nagotla on Jan 26, 2012 9:08 PM

    Hi,
    you can use track connections.
    Best Practices: Track design for ongoing development
    Best Practices for NWDI: Track design for ongoing development
    Regards,
    Ervin

  • Activites in NWDI

    Hi all,
                   I am new to this NWDI.Can any one plz give me details abt
    1)When activites has to be created and
    2)how many activties  a component can have ??
    3)Is it possible to work in 2 activites at a time??
    Regards
    Padma N

    Hi,
    Activities in NWDI are like locks for your source code. So if you are working on a view (in a webdynpro DC), all relevant files of the view are "checked-out" for you to edit (also serves as a marker telling others that your actually editing them and not to touch them - in a team environment). Not only this, but an activity also functions as version control. Keep modifying the same view and check-in and modify again at a later point of time, NWDI keeps track of the versions.
    1)So, thats when you create an activity. Whenever you're modifying source from the repository (i.e DTR), you create an activity and then check-in when you're done with it.
    2)There's no limit to the number of activities for a component. Logically you create an activity whenever you change something either part of the DC or the whole of it. And its good to work on different activities for a particular change because you've different versions available through the timeline. For ex. you've to make change A and B to a DC. Either you can create an activity, incorporate both changes A and B and check them in. Alternatively, you can create activity1 incorporate change A, check-in and create activity2 incorporate change B check-in. You've two versions of the source code maintained in the DTR so that you can revert to an old version if necessary.
    3)It is possible to work on 2 or more activities at the same time (for the SAME DC), but it is not advisable due to the behaviour of activities (all the activities are consolidated upon check-in and a good reason is to avoid source conflict).
    Hope that helps,
    Thanks,
    Rajit

  • Problem in Activation of Activities in NWDI

    Hi All
    When I activate an activity generates this error in the CBS
    INVALID dependency is declared to public part: default.
    DC 387 variant "default"][SC 251 "sap.com_SAP_ESS_1" using PP default of DC 115 at Build-Time Dependency
    ERROR! The following error occurred during request processing:Activation failed due to component "isa.com.co/ess/co/cls" variant "default". The component is BROKEN
    Could anyone tell us what the problem could be?
    Thanks and Regards,
    Carlos Madrid

    Hello Akshatha
    Thank you for help
    This error occurs for all activities activated by different applications.
    I did tests generating activities with Web Dynpro applications that have no problems and are in the portal and these also generated the same mistake
    All this happens after applying the SP21 to the portal.
    What could have happened? How can I correct this mistake?
    Thanks and Regards,
    Carlos Madrid

  • Possible solutions  to Mulitiple Roles/Activites -Open thouht

    Background:
    1.In corporations where the end user comes in in three differnent shifts will need to execute SAME  activites.
    2.Here the  Posistion remains the same, activites remain the same , role  remains the same.
    3. What is  differnent is the end user and the time.
    Given this sceanarion, how do we define the access credentials ? By end user or by the  posistion ?
    Thanks

    Hello George,
    It takes courage to field a snappy comment and accept an apology for it as well, thank you!
    (I won't comment on the courage it takes to ask the question in the other thread
    Making correct judgement calls is more difficult than clicking on the "lock" button. We all make mistakes
    Getting back to the technical stuff: Regarding reference users (mentioned in the other thread), you should be carefull of auditability aspects with them as well. Assigning authorizations to a user indirectly via another user (as opposed to assigning a user to a role) also weakens the audit trails (at least it did the last time I checked).
    Also see SAP note 513694 (regardless of whether you use the concept or not).
    Kind regards,
    Julius

  • Month end and Year end Activities

    Hi All,
    What are the month end and year end activities are involved and how will they happen????
    regards
    vasantha

    Hi Vasantha,
    Month-End Closing
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/96/8b3c2d43ce11d189ee0000e81ddfac/frameset.htm
    Year-End Closing
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/96/8b3c2d43ce11d189ee0000e81ddfac/frameset.htm
    Some of the Month-End Activities
    - Open and Close Posting Periods
    - GR/IR Clearing
    - Adjustments in G/L, AR and AP accounts
    - Foreign Currency valuation for Exchange rate fluctuations
    - Transfer Postings to Reconciliation accounts from CO module
    Some of the Year-End Activities
    - Balance sheet adjustments
    - GR/IR Clearing
    - Adjustments to special Posting periods at year end
    - Balance Confirmations for AR and AP accounts
    - Run Balance Carryforward program for G/L, AR, AP accounts at year end or first day of next year
    - Generate Financial statement for the current year
    Best Regards,
    Mohan.
    Edited by: krishna on Dec 18, 2008 12:01 PM

  • Getting VFS manager for client EED_diarough_D failed: Activity report (get

    Hi,
       I'm using NW 2004s SP9. While trying to check in the activities in NWDI from NWDS I'm geting the following error messege:
    " Getting VFS manager for client EED_diarough_D failed: Activity report (get open activities for current repository and user) failed: Internal Server Error"
    Can you please help to resolve this issue.
    Regards,
    Subhayu

    NetWeaver Sneak ...  SP 16:  table PVC_ACTVERSVIEW missing i got answer from this.
    Had to redeploy sda and it solved all probs .it was the prob with WAS...

  • Error while adding a used relationship between the New DC and the Web DC

    Hi Gurus
    We are getting the Error in NWDS while Adding  a used relationship between the New DC and the Web DC.
    Steps what we are Done
    1. Create the custom project from inactiveDC's
    2.creating the project for the component crm/b2b in SHRAPP_1
    3.After that we changed the application.xml and given the contect path.
    4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
    so, we skip this step and tried to create the build then it is saying that build is failed..
    Please help us in this regard.
    Awaiting for ur quick response...
    Regards
    Satish

    Hi
    Please Ignore my above message.
    Thanks for ur Response.
    After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the  projects was also sucessfully done and  EAR file was created.
    We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
    For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
    In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
    When i  right click on my activity Id the deployment summery is also disabled.
    So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
    Any pointers in this regard would be of great help..
    Awaiting for ur valuble Responses..
    Regards
    Satish

  • How do I get iCal to sync to my iphone 4. It used to work and now it won't. Any suggestions will be most appreciated.

    How do I get iCal on my Mac to sync with my iphone 4.
    It used to work and now it doesn't.
    I am not on MobileMe or the Cloud.
    Any suggestions will be most appreciated.

    Hi Arezzo
    I'm asuming you are using iTunes then to sync? this can be done over WiFi or the USB cable.
    Review your setting for the calendar sync once iTunes is open and your iPhone is connected. Make sure your Calendars are selected to sync that you need. By default all calendars will.
    So the option i have for you is to reset the sync service and this will reset those settings in iTunes. Meaning that you will have to switch them on again in iTunes to sync. But this mostly clears unresolved sync issues.
    Please do yourself a favour and hit backup in iTunes before doing any testing. iTunes will then keep a local backup of your iPhone in case of any data loss.
    {added}
    open Terminal from your Utilities folder and paste this command in to reset. OS X 10.6 - 10.8
    /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl full [press Enter]
    if it prompts for a password, just type your password and hit [Enter] again.
    Open iTunes then set your syncs up and it should then carry on again.
    Message was edited by: WaldoWTM

  • How to get my ipad to connect to itune if the password is locked

    How to get ipad to connect to itune if the password is locked.

    note total data loss
    recovery mode
    open itunes on computer
    plug cable into computer not iOS device
    turn device off
    hold home button and plug cable into IOS device.  do not release home button until an itunes graphic appears on IOS device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808

  • E-Commerce 5.0 Custom B2B Application changes are not reflecting on screen

    <h5>Hi Experts,
    I am currently working  the E-Commerce for ERP project. Part of that I am customizing some of standard screens. I was able to indentify JSP, .Properties, .XLF files where I can change Header name (startpage.header),  Shop Name (b2b.jsp.applicationName) etc . I am following the SAP help guide (How Tou2026 Create Custom Application in E-Commerce 5.0.pdf).
    Below are the steps I completed so far
    1)     Created a custom track in NWDI
    2)     Added dependency SC components
    3)     Check in & Imported to development tab
    4)     Imported track in to NWDS
    5)     Created custom DC (J2ee Enterprise Application) under CRMCUSTPRJ SC
    6)     Created copy files from the standard application crm~b2b to our custom application home/b2b_xyz
    7)     Added used relationship between Add a used relationship between the New DC(B2B_XXX) and the Web DC (crm/isa/web/b2b )
    8)     Added relationship between Web DC (crm/isa/web/b2b )and Ext DC (crm/home/shr/ext )
    9)     All above tasks are added to NWDI Activity
    10)     No Build error etc.
    11)      Deployed in to DEV Server and able to access Shop Front and Shop Amin (SCM) screens successfully (Went everything smooth till this step)12)      Now I modified Shop Header and Application name Key/Values in crmb2bresources_en.properties, crmb2bresources_en.xlf of NDI_XXXXXX_Dcrmisawebb2b~sap.com DC
    13)      Rebuild crmisawebb2bsap.com
    14)      Import Used DCu2019s in custom B2B_XXX Project, Rebuild and Deploy
    15)      Restart B2B_XXX custom application in Visual Administrator- Deploy  JDBC
    After all above steps I am expecting to see the shop header and Application Name in my shop. But It wasnu2019t happened.
    I also checked in and activated my activities in NWDI. And my NWDI track
    auto-deploy is on . I believe I donu2019t need to release my NWDI activities to Test.
    Please help me with your inputs.
    Thanks
    Aravind
    <h5>
    Edited by: Aravinda Boyapati on Nov 5, 2010 5:12 PM

    Hi
    Please check  the following for NWDI system
    http://ip:port/TCS/Deployer
    Check deployment status of your request id.
    You can also see the build or deployment errors.
    Regards,
    Sumit

  • Image Mask Error Message when Reducing Size of PDF

    With my Mac, I embed jpg images in Microsoft Word documents, save them as pdf's, and reduce them. Size reduction often fails, with the error message "The PDF document contained image masks that were not downsampled".  Jpegs don't have masks, so I have no idea how to fix this problem, and an extensive google search was of no assistance.

    Use PNG images instead use an application such as Graphics Converter, Fireworks to convert to .png from .jpg.
    Will have much better images that do not degrade each time they are opened and most often they end up being same size than jpeg's
    Jpeg unless you save as a special type is a Lossy format and each time is open (and decompressed) then closed (and then compressed) losses detail
    Just open and magnify a jpeg after its been open 5-20 times you notice an out of focus halo looking similar looking to water spilled on paper wil pen ink on it. And it get progressively worse. PNG on the other hand is not lossy and if the original is saved as png never degrade even when reduced in size or or expand within reason in size.  I've being dealing with photos screenshots, images and other for years. Despite what other may say on this list may say if you want an image with little trouble for years of service save as png.

  • Can not see pdf file on desktop

    when i saving from word to pdf on my windows 7 desktop is not on the desktop,but when i search for the file an check the file location it show it's on desktop can any one help me to solve this problem 

    Hi，
    How about other files? or this issue only happens on the PDF? have you tried to manually copy a PDF to the desktop?
    My guess is that the PDF does exist in a desktop, but not the real desktop, but a virtualized desktop.
    such as path users\username \Appdata\Local\Microsoft\Windows\Temporary Internet Files\Virtualized\C\Users\username\Desktop
    As ａtest, you can use Process Monitor to capture the process, download this tool from this link
    http://technet.microsoft.com/en-in/sysinternals/bb896645.aspx
    once you download and install it, open it, while it is recording the activities, open a dialog, which shows the specific pdf file, then in process monitor , use keyword (suc as pdf) to find the specific process
    You can refer to this link
    http://blogs.technet.com/b/markrussinovich/archive/2009/02/03/3174194.aspx
    Yolanda Zhu
    TechNet Community Support

  • Hyperion 11.1.2  - Ruleset name with '&' has issue

    Hi
    We are migrating from Hyperion 9.3.1 to 11.1.2...
    We migrated a Sequence from 9.3.1 to calc manager Ruleset in 11.1.2.
    I have a Ruleset name "Profit&Loss"
    When I open the webfrom using planning URL , when I launch this ruleset, i get the below error.
    An error occurred while processing this page. Check the log for
    details.
    Log file says unable to find the Ruleset "Profit", insted of  "Profit&Loss".
    The same thing works fine through Workspace URL.
    Please let me know, if any one had the same issue.
    Thanks
    TSREDDY

    Yes Sree. We did had those kind of issues where "&" and "/" caused issues. We had to disable the ADF for that. However, our issue was with Planning members and forms
    I don't remember correctly if that was fixed and a patch was issued but that was in 11.1.2.2
    After that experience, we have decided not to use special characters in Rule Name, Form Name, Member Name
    Regards
    Amarnath
    ORACLE | Essbase

Maybe you are looking for