Loss of sound via external devices and odd issues when switching inputs.

When I plug in my headphones via the headphone jack, or my Logitech USB headset thru the USB port (either one), I get no sound coming out. Going to sysprefs>sound>output and selecting the approporiate device results in no volume control on keyboard and spinning beachball for several seconds. Unplugging device results in sound repeatedly going "pop, pop, pop" at whatever volume the internal speakers were last set at.
Something is skewed in the audio components but I am not sure what it is and am not sure how to proceed.

Remove that in safe mode using >>Driver Fusion<< and install latest MSI driver: http://www.msi.com/product/vga/N660Ti-PE-2GD5.html#/?div=Driver&os=All

Similar Messages

I've been running Windows XP over bootcamp on an iMac for a few years now and I can't seem to get any sound from external devices into the machine. Any ideas?

I've been running Windows XP over Bootcamp on iMac for a few years and I can't seem to get any sound from external devices into the machine. Any ideas?

O.K. fgonoz98
I would do 1 thing at a time:"now the micropohone is not working in facetime"
Here is what you can check to get your mike working in facetime:
1. Hold down option while you click on the speaker next to time a. date,
under input Device see if your mic is marked. If not: ✔️
2. Click the apple top left/System Prefs./click on the Sound speaker:
under Input highlight microphone.
3. When you have factime on go to video above scroll and see if your mic is marked ✔️
If that does not get it to work there is more you can check:
(Utilities/Audio, midi setup)
For any other audio device you do this for input and output.
If you get stock post back

Odd issue when using UDT (user defined type)

Hi all,
11g.
I ran into an odd issue when using UDT, I have these 4 schemas: USER_1, USER_2, USER_A, USER_B.
Both USER_1 and USER_2 have an UDT (actually a nested table):
CREATE OR REPLACE TYPE TAB_NUMBERS AS TABLE OF NUMBER(10)USER_A has a synonym points to the type in USER_1:
create or replace synonym TAB_NUMBERS for USER_1.TAB_NUMBERS;USER_B has a synonym points to the type in USER_2:
create or replace synonym TAB_NUMBERS for USER_2.TAB_NUMBERS;Both USER_A and USER_B have a procedure which uses the synonym:
CREATE OR REPLACE PROCEDURE proc_test (p1 in tab_numbers)
IS
BEGIN
NULL;
END;And in the C# code:
OracleConnection conn = new OracleConnection("data source=mh;user id=USER_A;password=...");
OracleCommand cmd = new OracleCommand();
cmd.Connection = conn;
cmd.CommandText = "proc_test";
cmd.CommandType = CommandType.StoredProcedure;
OracleParameter op = new OracleParameter();
op.ParameterName = "p1";
op.Direction = ParameterDirection.Input;
op.OracleDbType = OracleDbType.Object;
op.UdtTypeName = "TAB_NUMBERS";
Nested_Tab_Mapping_To_Object nt = new Nested_Tab_Mapping_To_Object();
nt.container = new decimal[] { 1, 2 };
op.Value = nt;
......This code works fine, but it raises an error when I change the connection string from USER_A to USER_B, the error says:
OCI-22303: type ""."TAB_NUMBERS" not foundInterestingly, if I change op.UdtTypeName = "TAB_NUMBERS"; to op.UdtTypeName = "USER_2.TAB_NUMBERS", the error is gone, and everything works fine.
Anyone has any clues?
Thanks in advance.

Erase and reformat the ext HD. Then, redo the SuperDuper! backup.

Should iphone 4 receive messages when turned off and display them when switched back on

should iphone 4 receive messages when turned off and display them when switched back on

It's up to the cellular carrier, but I believe most (if not all) will enqueue the messages when your iPhone is off.
So generally speaking, a few minutes after you turn your iPhone on, your messages should display. Similarly, your voicemails would arrive.

Loss of sound comes on loud and distorted any clue

Updated operating system now I lose sound and more often then not sound comes very distorted and loud des tarting the unit works sometimes but the problem always returns anyone have any ideas?

Do you lose the sound or is it very distorted and loud?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

How do I get sound from external device into my iMac?

Hi there, I am trying to get sound from a Pioneer DJ mixer which has standard RCA outputs into my my new 21" iMac. Typically in the past I would get a converter from RCA to 1/4" stereo jack and plug into microphone input, how simple. Now Apple has changed the set up and have no idea as to how to get sound in. The headphone jack in the back of the iMac will only take sound in from earbud microphone, other than that it will only be for sound output. Any help would greatly appreciated.

beat maker wrote:
do i need to transfer the midi region to the audio region to hear the play back.
If you need audio monitoring of your device the "Software monitoring" in the Logic Preferences must be enabled. You can switch on the Audio Track monitoring button (labeled as "I" at the bottom of the channel strip).
ive tried recording the keyboard audio thru and audio track it works just cant quantize it like u said and i think ive already tried it before but ill give it a go again
This is wrong conception. To be able to quantize or do any processing like that, you need to record your performance using a midi track in Logic.
1. I hope you have created some Multi or Standard Instrument so you can edit (quantize) the midi region etc. When you decide that your midi work is O.K you can record it as audio using the Audio Track you are talking about.
2. The other way (new one) is to use the "External" plugin inserted on a Software Instrument.
This way combines midi and audio i.e you record/draw the midi on the Software Instrument track and is outgoing from the Software Instrument channel strip. In this method you must use "Real Time" bounce cause you use external midi device.
3. If decide to use the second method you can bounce the audio but you also can record the audio on an Audio Track if route the Software Instrument to a Bus and assign the Audio Track "Input" to record from that Bus.
!http://img59.imageshack.us/img59/4967/aglogo45.gif! [www.audiogrocery.com|http://www.audiogrocery.com]

Loss of sound via display for YouTube, games, etc forces restart to fix

Having issue of sound "dropping out" when using YouTube, games, etc. when I restart function OK for a while, then have to reboot to resetablish sound. Display is source of sound and shows as input OK but does not give volume control function (may have done so when operating OK)
When using the tv itself sound OK, and vol. controls work well. this is a recent event - any ideas?

If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

USB External Device and Tiger

I just upgraded to Tiger from Panther. When booting I had to have my Plextor drive turned on to be recognized. (USB 1.1) With Tiger, same procedure is followed, sometimes computer boots fine, sometimes I get the dread multi-language black box prompting a restart. Eventually computer does come up, but either way, it crashes when a CD burn is complete.
There are no issues when computer is booted with burner off, other than the fact I can't burn a disk because the device is not recognized.
??

dennisdster
As far as I know Plextors are not directly
supported
by OS X. you may want to download
http://www.versiontracker.com/dyn/moreinfo/macosx/2510
0>patch burn which will help apple oriented
applications "see" it. BTW, how do you connect the
drive to your mac?
Thanks for your response!
The URL you provided for the patch gets "The page you
tried was not found"
The drive is connected via USB at the back of the
tower.
Excuse the Sunday morning stupidity - burner is connected via SCSI

Reinstall of Win XP Pro on T42 help = Device and Driver Issue

Hi All, need help. Recently I re-installed Win XPro on a T42 Type 2373 ThinkPad. Prior to doing a re-installed all devices were working(just 3 days ago). Wireless and Ethernet. After a clean installed the systems does not see ethernet or wireless device. I checked Device Manager and I get the famous "? Other Devices" for Ethernet Controller. I have installed all the driver listed on
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-55386
Still systems does not recognize device. Devices are ENABLED in the BIOS. Device Manager does not show Wireless device and Ethernet. I was able to install video, sound, & modem. So here I am stuck unable to connect to internet via LAN or Wireless. I am lost for words. Any help would be greatly appreciated.
Thanks

Solved: after downloading the driver I actually had to go to the location of the file and click on the SetUp and it worked.
After downloading and opening the exe file i assumed (and we know what that does) that was all i needed to do. It seems that also have to then open the folder that this file unpacked to and click on the setup file (which i didn't realise was there).
http://forum.thinkpads.com/viewtopic.php?t=66278

External hdd and usb issue

Hey there... May sound like a silly question but I am having a problem with an external hdd.
I recently bought a brand-spanking new macbook pro w. retina and can't find my external hdd when I plug it in.
Theoretically, there should be no problem between the old hdd's usb 2 and the new macbook's usb 3, and the new computer is only a week old, so what I was wondering was whether anyone knew if there might be any interface issue between the old hdd (can't remember exactly what the os was - it was either leopard or snow leopard...10.6.something as i recall) and the new one (10.8.3)?
Or should I just go ahead and weep over the old lost hdd?
Appreciate any help

Unreliable wireless performance may occur when USB 3.0 external devices are close

Windows 8.1 Devices and Printers Issues

We have deployed a brand new Active Directory domain for a customer. ALL the servers without exception are Windows 2012 R2 and all clients are Windows 8.1 32bit VDI clients.
The issue that we have is around network printers.
We are deploying 4 printers from a Windows 2012 R2 Server via the print management/Deploy Printer and assigning that to a GPO. The printers are deployed to the Computers which should mean that the users get all 4 printers which they then should be
allowed to set their default and personal settings for that printer.
Our printers are deployed like this:
1. Created security group
2. Assigned VDI computers to the security group
3. Created GPO to reflect security group
4. Modify GPO to do security filtering based on computer group membership
5. Deployed 4 x printers through Print Management to the GPO on a per machine basis
However, on the users Devices and Printers screen we are not seeing the 4 printers. For some users they see duplicates of all 4 printers so e.g they can have upwards of 8 or more. Other users have no printers
displayed whatsoever. The next time they log off or restart they then have a different amount of printers displayed.
If they try and set the default then it will set and the next time they check the default may have moved to another printer even without logging off or back on.
Now, where this gets strange is within an application such as MS Word 2013 or Notepad if they use the file and print menu the printers will be listed, even if the user has no printers displayed in Devices and Printers. If the users selects a printer then
they can then print OK.
If we check HKCU\Printers||Connections then the CORRECT 4 printers are showing as to what is being deployed via the GPO so I know that the Windows 8.1 terminals are receiving the correct printers from the GPO.
To try and correct this over the course of the week we have deployed the printers via Group Policy Preferences to the user and then the PC to no avail. Currently we are using the Print management\Deployed Printers to deploy all 4 printers to the computer
via the Computer GPO.
I believe that this issue is related to the display somehow in Devices and Printers rather than a GPO or print server issue as we can see via the registry the clients are receiving the 4 correct mentioned printers as shown in the registry.
FYI: We only have around 30 users and all users are getting this problem. All users are receiving the same GPO's and have the same few apps installed, Office 2013, Adobe Reader etc.
What we want is for the computers to receive all 4 printers. All users should be able to use all 4 printers but the user should be able to select their particular default, depending where they are located or what they are printing that particular day. Their
particular default should persist after reboot. (We have 2 x Copiers and 2 x HP Laserjets) All users have redirected documents and desktop but the rest of the profile is on the VDI and persists after their reboot. The profile is not roaming as the user is
assigned a particular VDI.
After a week of scratching our heads with this we are open to suggestions and any would be appreciated. We have tried following the issues on this thread to no avail either as they still return.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/71d06204-3735-4473-8bc9-20be9e19090e/problem-with-multiple-instances-of-shared-printers-being-installed-on-client-computers-when-the?forum=winserverprint
many thanks

Hi,
It's strange thing on your client PC. You may ask the GP support engineer to know more.
Support link for GPO:
http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverGP
On my side, I would like you to try following alternative suggestions:
Try Net use command to map the network printer
Use GPO to deploy the map script
How Can I Add a Network Printer at Logon and, Optionally, Make That the Default Printer?
http://blogs.technet.com/b/heyscriptingguy/archive/2006/12/12/how-can-i-add-a-network-printer-at-logon-and-optionally-make-that-the-default-printer.aspx
Hope it could be helpful.
Kate Li
TechNet Community Support

External display and sleep issues

A 15-inch MacBook Pro worked fine with an external display and keyboard prior to the 10.5.2 update. After the update the external display goes dark when the laptop is closed. Hitting the external keyboard momentarily wakes up the external display but then it almost immediately goes back to sleep. It's as if the MBP thinks it's in battery mode and not plugged into an AC outlet.
All Energy Saver settings are to keep the display awake. Could this be a corrupt driver or some other issue?
Thanks.

Theres been a lot of disscussion about this and it's a BIG problem. Check this out:
http://discussions.apple.com/thread.jspa?messageID=6597635&#6597635
http://discussions.apple.com/thread.jspa?messageID=6669894
A lot of us are having the following problems after the graphic update:
-not waking from sleep (waking, but display staying dark, restart is only solution)
-not being able to use in clamshell mode (with external monitor)
-not being able to run external monitor at full resolution
I've also had some weird bugs like the settings and calibration of my external somehow coming over to my MBP monitor after disconnecting the them.
I hope Apple can fix this.
Tim

Play sound in specified duration and desired file when reading data with VISA functions ?

Hi.
I read data with VISA read function and then I use functions like multiple for showing data on Chart. every thing is OK.
now I want play a specified sound (like a 3s song in my desired folder) when signal amplitude cross over from specified value. then after desired time, it will be wait for new cross over from specified value and this procedure repeat again until I stop the program.
Data comes from MCU and it doesn't stop when system play sound and when system play sound, incoming data for this part (play sound) will be ignore them until specified expired.
I use this VI for reading data and mentioned part which is sound part is empty and I don't know what I must done ?
altougth I use another while loop for sound apart because I want save CPU time.
Thanks.
Solved!
Go to Solution.

I would recommend making the data type of the notifier a cluster that contains a path and a numeric (double). The path tells the player which file to play. The numeric is the duration.
Now for a slightly complicated, but really neat, way to stop your second loop. Do not use a second notifier. Instead, send the normal notification but use Not A Path for the path in the cluster. Your second loop can do a check for the Not A Path and stop when that is recieved.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Output Device and Format issues in Background?

Hi, all:
I have a issue. when I run the job as the background. whatever I choose which Output Device and Output Format. after finishing job. double click on the spool number. the Output Device is always LP01. Format is X_PAPER.
Anybody knows what happend in SAP.
Thanks in advance.

Hi Yunfa Zhang,
what is defined as ABAP program in the Job's step? Maybe it ignores whatever you specify and reads the LP01 from somwwhere else, i.e. your user settings.
Regards,
Clemens

External drive and sharing issues?

I've posted this question before but got no answer, so, I'll try again.
Ok here's the situation. I have a small network here at work. We (four of us) share a harddrive connected to computer A. That drive has all the client jobs on it that we all open and change and save. Lately and sporadically (no rhyme or reason) computer B, C, or D may try to open a job and it will say "access denied" and can not open it at all –OR– computer B can open it but will not be able to save it again in the same location. Now even though computer B can't do one of the two things listed computer C and D can open, fix and save with no issues. Again most of the time but not everytime.
Is there a way to fix this "sharing/permissions" issue? It's a bit frustrating.
I have opened the drive we are using and "got info" and assigned every individual listed full access and rights and that did not fix it.
What am I missing here? Or is this a system X issue with permissions and I just have to live with it?
Future plans are going to a server system which I assume will fix the problem but for now this is my set-up and looking for a fix. Thanks
G4

Couldn't you choose to "ignore permissions on this volume"
for the whole external drive; and then (hopefully) all of the
users would have no immediate sharing message issues?
Of course, when articles or documents have several updates
and more than one author contributing to their content, the
files themselves may develop permissions issues.
Among the casual reading I do on computer topics, I read
more than I need to know, so I know the answer is out
there and not terribly hard to implement; yet unfortunately
I do not recollect the path to the argument on how to do it.
There is a fairly simple outline of a way to handle some of
this stuff in the following page/link; more detailed info is
on the additional page/links which follow after this one:
• Mac OS X 10.5 Help: Mac 101: File Sharing
http://support.apple.com/kb/HT1549
Among the security documents (download .PDFs) on OS X
there are some fairly good paths to implementing security
to include how to change permissions & privileges; as part
of the overall security strategy; some of those documents
covering these matters are in the Server security setup docs
from Apple Support's database. I have three .PDFs saved.
These vary from 2MB to about 5MB each.
• Mac OS X Security Configuration Guides
http://www.apple.com/support/security/guides/
Some of the Share Points and other facts here may be
of help, even in a non-server environment:
• Apple Support - Leopard Server - File Sharing (10.5)
http://www.apple.com/support/macosxleopardserver/filesharing/
There is a large amount of information available.
Good luck & happy computing!

Loss of sound via external devices and odd issues when switching inputs.

Similar Messages

Maybe you are looking for