Lost ability to pair iphone with vehicle

Up until last week, I had bluetooth connectivity with my iphone in my vehicle.  After upgrading to iOS 8.3, my iphone is no longer discoverable.  I reset network settings, tried to pair my phone with another vehicle, and nothing seems to work.  The telephone support folks believe it is a software problem.  Any chance this situation is going to get resolved.....

Hello, try to click in the info button next to the device's name then forget the accessories/vehicles you paired with and then try to pair again
Hope this works for you!!

Similar Messages

  • Since the ios7 update has anyone lost ability to charge phone with external battery back! And is there going to be an update to correct this?

    Since the ios7 update has anyone lost ability to charge phone with external battery back! And is there going to be an update to correct this?

    Modular747 is a troll with very little real knowledge of the iPhone charging systems (as evidenced by his uninformed comments in other threads).
    It could very well be iOS 7 refusing to charge from "non-authorized" accessories. We have done A/B tests with the same accessory (in this case cables) with iOS6 and iOS7 and have seen the cable work with iOS6, then not work (i.e. not charge) with iOS 7. Same device, same cable. Only change was the OS.
    Keep the pressure on Apple, folks. It is not OK to make working accessories unusable with a software update.

  • HT2693 how to pair iphone with apple tv without remote for apple tv

    i lost apple tv remote.  trying to use i phone as a remote but without the remote to do setup on apple tv, i cant pair up the iphone with apple tv.  please help.

    If both items are enabled for Home Sharing and on the same network and it won't work yopu're going to need another remote.
    AC

  • HT201205 can't pair IPhone with SYNC in Ford

    Have tried numerous times to pair IPhone 5 to SYNC system in two Ford vehicles.   Help?

    This is a problem with the bluetooth and the macbook air.  I mentioned the reason behind my need to pair - as it is not to share music, internet, etc. which I understand may be an issue.  I cannot find how to get support from the app maker, which is apple from my understanding. This app, keynote, only controls the keynote app on my mac. I haven't had any problem pairing the iphone and keynote but I need to control my keynote using bluetooth, as I have no garuntee that I will always be in a place with wifi or be able to access the wifi.

  • Pair iphone with GPS receiver?

    Is it possible to get an A2DP dongle for the iphone and then pair it with a bluetooth GPS receiver, thereby using the iPhone as a GPS? I don't want to buy all this junk if it's impossible. Thanks for any info!

    cyneller wrote:
    Is it possible to get an A2DP dongle for the iphone and then pair it with a bluetooth GPS receiver, thereby using the iPhone as a GPS? I don't want to buy all this junk if it's impossible. Thanks for any info!
    No. Bluetooth only works for Audio.

  • Cannot pair iPhone with iMac

    I have an iPhone 5c, iOS 8.1, and an iMac running Mavericks.  I am trying to pair my iPhone with the iMac (via Bluetooth) and it will not let me do so. I just finished reading a post from 2008, stating that it was not possible.  Is this true???  I could pair my old flip phone (non-Apple) to it without difficulty.  Hard to believe I cannot pair 2 Apple products together.
    Thanks,
    Glen

    iOS devices don't natively support file transfer over BT.
    You can use Photo Stream to access all of your pictures from all of your devices.
    My Photo Stream FAQ
    Depending on which model iMac you have, you may be able to use Airdrop.
    Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices
    I'd also take a look in the App Stores (Mac and iOS) for apps that will let you transfer pictures between the two devices wirelessly.

  • Pairing Iphone with Lexus

    I previously had a 3G Iphone which paired brilliantly with my bluetooth system in my 4 year old car. However, the new 3GS Iphone does not pair at all, the Iphone can not find any devices. I'm guessing this maybe to do with the 3GS software being version 2.1 as opposed to 2.0 and is now not compatible with my LX-350 Lexus. If this is the case, is it possible to download the older version? or is there another way around this problem?

    I had this same problem a couple of times with previous versions of the frimware on my Acura TL.... Here's what worked for me when I upgraded to the 3gs... Do a hard reset on your phone (hold the sleep/wake button and home button simultaneously for about 10 seconds or so) the phone will shut down... Release the two buttons and turn your phone back on... Try the pairing process now, it should have fixed the problem... If that doesn't fix the problem then do a restore in iTunes... The restore method worked for me back in the 2.0 firmware days.... Good luck

  • Pairing iPhone with a 2006 Audi Q7

    Anyone had any success pairing an iPhone with a 2006 Audi Q7. It initially seemed to pair with ease. Now it is less frequently creating a Bluetooth connection with the car. The phone is saying that it is successfully paired with the car. Any suggestions

    Your iPhone is probably still running 1.1.3. If you upgrade to 1.1.4, your iPhone will be able to pair up with the GPS perfectly. I have two Garmin Nuvi 680s and my iPhones pair up with them with 1.1.4 with no problems.

  • Problem after iOS5 with pairing iPhone with Car

    I have a Lexus is250 which paired beautifully with my iPhone and I was able to play music from phone in my car.  Since the upgrade, I cannot.  I have "repaired" "Blue tooth audio", the radio in car "looks" like it is playing (you can use the controls on the car stereo to forward through playlist and it forwards on phone" but no sound comes out.  This worked perfectly fine before iOS.  Any ideas?  I've deleted and re-paired phone twice....

    Same problem here with a 2011 Subaru Outback/Harman Kardon sound system. My iPhone 3GS used to work very well and auto-connect with the Harman Kardon system under iOS 4, but after upgrading to iOS 5 the iPhone looses connectivity each time I power the iPhone off and back on. It will keep connectivity as long as I do not do this. Turning the car off and back on works fine, connectivity re-establishes immediately. I even reset my iPhone and re-installed firmware and everything else - problem persists. SHAME ON APPLE FOR LOOSING CORE FUNCTIONALITY IN FAVOR OF BRINGING IN LOTS OF GIMMICS THAT ARE OF LITTLE OR NO USE IN EVERYDAY LIFE. SHAME ON APPLE ALSO FOR NOT PROPERLY BETA-TESTING THEIR SOFTWARE AND MAINTAINING BACKWARD-COMPATIBILITY IF THAT IS THE PROBLEM. We users should be entilted to monetary compensation from Apple whenever a software "upgrade" negatively affects a core functionality. Tim Cook, please correct some of the flawed corporate policies the belated Steve Jobs implemented. Apple still has a lot of room for improving! First of all, focus on optimizing core functionalities and their robustness before wasting time on changing icons or other cosmetic features.

  • Pairing iPhone with Jawbone

    Can someone come back with a walk through over how to pair the iPhone with a Jawbone?
    Mine won't. I keep thinking I am doing something out of sequence. But, no combination is working for me.
    B

    Follow the instructions on page 9 of the Jawbone manual. On the iPhone bluetooth page under "Devices" you will see "Jawbone - Not Paired". Tap there to bring up the passkey page. Enter "0000" and press connect at the top right of the page.

  • Pairing iPhone with Plantronics Voyager 520

    I cannot pair my iPhone with a new Voyager 520 headset. I was able to pair the last one (which died, so I had to buy a new one ....)

    Without turning the headset on, turn the bluetooth on for the phone. Select the headset that is paired, and select Unpair. Then turn bluetooth off. Put the headset into the "discover" mode, by holding down the power button until the light flashes red and blue. Then turn the bluetooth on for the phone, and it should "discover" it. It should ask for the passcode, normally 0000. Once you enter that, it should pair. After that, you should be alright. You can turn the headset off and back on again and it should connect right away.
    Hope this helps.

  • Lost ability to stream iTunes with airport express

    I have a mid 2007 iMac using a Time Capsule for backup and Wifi and an airport express hooked up to my house audio system for airplay.
    Just upgraded to Mountain Lion and lost the ability to stream iTunes to my audio system. External speaker icon and controls are still there in itunes however when I select it, it wont connect. Airport utility shows the iMac, Time Capsule, and Airport Express with green lights. Checked for software updates and rebooted all three devices to no avail.
    Any ideas experts?

    Hi, I've already answer you on another thread but there's a serious issue with at least our old machines:
    auto-quote mode:
    I have the same problem
    https://discussions.apple.com/thread/4154491
    I noticed that mountain lion drop wifi speed when using airplay or time capsule features, and these features are now unusable... Haven't find a solution yet

  • Pairing iPhone with MacBook on FIOS network

    We recently got FIOS in our apartment. I have no problem connecting to our FIOS network on my MacBook via Airport or on my iPhone. However, I cannot get my iphone and MacBook to pair via FIOS. I recently had everything wiped off my MacBook and restored. I have Fliq Notes on my iPhone and had synced it using Mark/Space Notebook on the mac. Now, I can't access the notes or their categories on Mark/Space Notebook -- all that seems to be left is the application (recovered through Time Machine). I've been trying to get the information back onto my MacBook by syncing from the iPhone, but when I go to pair the two devices, I just get a ghosted "looking" within Fliq Notes. I'd prefer not having to purchase an ethernet cable, and want to know if there is another way to get the two to see each other and pair so I can sync the data.

    You mentioned that the apps were restored from a backup. Try reinstalling the Missing Sync app on your computer. Next go thru the pairing process again. I don't have access to test pairing with a fiber optic connection. If you're able to pair, change the notes plugin settings to Device overwrites desktop. The notes database could be corrupted if the sync fails. You could locate the notebook database, move it and try the overwrite sync again.

  • Can't pair iphone with macbook (air)

    I haven't been able to pair my iphone 3GS with my macbook. I want to pair it via bluetooth to use an app that I purchased to control keynote.
    I have had this problem with a macbook and macbook air.  Two weeks ago my main computer was an older black macbook and my iphone would not pair with my macbook, I thought maybe because the macbook was just getting on; as my (bad) luck would have it I was foced to purchase a new computer, and purchased a macbook air and I am just finding that it still doesn't work.
    When I go to pair it, I can get to the point where I accept the pair but then when I click on pair from the iphone, it says my macbook is not supported.
    I have searched these forums and have not found an answer that works for me. Thanks in advance for any help that you can give.

    This is a problem with the bluetooth and the macbook air.  I mentioned the reason behind my need to pair - as it is not to share music, internet, etc. which I understand may be an issue.  I cannot find how to get support from the app maker, which is apple from my understanding. This app, keynote, only controls the keynote app on my mac. I haven't had any problem pairing the iphone and keynote but I need to control my keynote using bluetooth, as I have no garuntee that I will always be in a place with wifi or be able to access the wifi.

  • Pair iPhone with alpine car radio

    My iPhone 5 won't pair with the Alpine radio in my car. The iPhone 4 did it with no problems.

    I have an Alpine CDE-103BT, had an iphone 4 paired to it. When I got my iPhone 5 I couldn't get it paired. It saw the unit but using 0000 failed each time even though the Alpine manual said to use it and that worked with the iPhone 4. I bought the Stereo at Crutchfield which has lifetime support for anything you get from them. After several hours of searching and reading forums I broke down and called Crutchfield. Supplied my order number and explained what was happening. They told me even though the maunal say use 0000 , try 1234 . Did 1234 and I now have the iPhone5 paired to my Alpine.

Maybe you are looking for

  • Airport data app no longer works

    Since iOS 6.  Reverts straight back to home page.  IPlane radar now defective, too.  And no developer site to go to.

  • Battery drains quickly!

    Does it take a couple of charches to reach full capacity??? Prof.

  • Master Page objects

    Bob, I can't find my previous thread, I don't even remember its name. So I am opening a new one, hope I'm not close to spamming by doing this. I had some problems with the objects on the master page, they didn't come out when exporting to PDF. Well,

  • How to search PDF in other than physical page order

    We need to search a PDF though not in physical sequence - to be positioned at the most appropriate occurance of a term based on the index which we have spent considerable time and effort refining. We are after suggestions and an example on how to add

  • Adding new music = freezing

    Hello all, I have been starting to have problems with adding music to my iTunes library. When I drag music into iTunes or use the "Add to library" function to add more music off of my harddisk (from a folder on the desktop for example) it locks up iT