Lost CSA in tray after intsall and reboot

Hello!
I make a new policy with rules Force VPN and Cisco VPN client policies.
After this I create group VPN FORCE and Windows Agent Kit with this group.
After installation on the windows client and reboot there in no CSA in tray...and there is no CSA in MCCSA also?
What could be a problem

Either no Agent UI rule applied to the hosts or a rule that hides the UI and you won't see the little red flag.
Is there a rule that should keep it showing?
Tom

Similar Messages

There are 6 updates to be made with my system and they start but after downloading and rebooting it always says that non could be installt because of an mistake, but no help, no number, no possibility to chose from...

there are 6 updates to be made with my system and they start but after downloading and rebooting it always says that non could be installt because of an mistake, but no help, no number, no possibility to chose from...

Do you get an error number? What is the exact message?
Two things to try.
- Sign out of the App Store (in the Store menu)
- Quit the App Store
- In Finder - Go>Go to folder... (or Apple-shift-G)
- Paste in the following "~/Library/Caches/ "
- It will take you to a folder. Delete com.apple.appstore
- Launch the App Store.
If that doesn't work, try an App Store reset and then try again.
App Store Reset Learned from Old Toad
There is a contact link.
App Store Support

When i make internet recovery i see question mark after install and reboot. Why?

When i make internet recovery on clear HDD's with created striped software RIDE 0 with two HDD in mac mini.
I see question mark after install and reboot. Why?

Make a "Genius" appointment at an Apple Store to have the machine tested. Back up all data before you go.

VMs won't start after updates and reboot.

I need some help.
I installed the November 2014 MS updates last night. I installed them on my lab Hyper-V box. The Hyper-V box is joined to a domain but is not a domain controller. It is Server 2012R2 with Hyper-V with all previous patches applied. I had two VMs configured
on the box. The VMs were a 2012R2 server and a Windows 8.1 box. Both were running fine. In fact I shut them down before I did the Microsoft Updates on the server.
The issue I describe below was not present until I did the updates and rebooted. The server and the associated VMs had been running fine for months. These updates are the ones that my SUS server provided to this server.
After I rebooted the server I could not restart either VM. I kept getting the same error that is listed below. I tried DELETING the VM from Hyper-V manager and then building a new VM and using the old vhdx. Again NO LUCK. I even tried CREATING a new VM and
I got the same problem.
(Additional Note: I appeared as though I was able to delete the VM from Hyper-V Manager. Hyper-V Manager displayed 'Destroying....' for some period of time and then the VM was removed from Hyper-V Manager. However, recreating the VM did not solve the problem.)
Each time I get the following error displayed on screen.
'Unnamed VM' could not intiialize.
An attempt to read or update virtual machine configuration failed
'Unnamed VM' could not initialize (Virtual Machine ID)
'Unnamed VM' could not read or update virtual machine configuration: Ran out of memory (0x8007000E) Virtual machine ID B9xxxxxxxxxxxx
=======================
I adjusted permissions on the C:\ProgramData\Microsoft\Windows\Hyper-V folder. Opened it up to "Authenticated Users" based on a couple of TechNet articles that I found. NO luck
In the Hyper-V Config log I get the following entry,
The configuration store at'' is not accessible Unspecified error(0x80004005)
==========================
I also had these errors in the Windows Application log.
ID=1000 Source=Application Error Type=1 Message=Faulting application name: vmwp.exe, version: 6.3.9600.17334, time stamp: 0x5407c751
Faulting module name: vsconfig.dll, version: 6.3.9600.16384, time stamp: 0x5215db66Exception code: 0xc0000194
Fault offset: 0x000000000001966c
Faulting process id: 0xb84
Faulting application start time: 0x01cffe274d55ea6b
Faulting application path: C:\Windows\System32\vmwp.exe
Faulting module path: C:\Windows\System32\vsconfig.dll
Report Id: d4210450-6a1a-11e4-80d6-0019b9eed814
Faulting package full name:
Faulting package-relative application ID:

OK,,so I solved this issue by removing the Hyper-V role and then readding the role. The permissions of C:\Programdata\Microsoft\Windows\Hyper-V
and C:\Users\Public\Documents\Hyper-V definetly changed
as a result of re-adding the role.
All required updates (as supplied by WSUS) are applied also.

Admin password fails after patch and reboot.

Hi,
Is there a way to resolve the issue of the admin password after applying a patch 117667-06 and rebooting the system.
Both the Sun One Administration Server 5.2 and Sun ONE Directory Server 5.2 services are running in Services.
I was able to login to the Server console prior to the patch, and to install the patch which requires the mentioned password.
Cannot connect to Admin Server 'http://servername:20000". The URL is incorrect or the server is not responding."
Thanks.

Can you please share what the solution was? Might be useful to other readers in the future.

Lost photos / camera roll after restore and update.

As the title says , I recently had to restore my iphone 3gs due to having problems with MAIL (problem fixed now.) but after doing a full backup and restore on the phone and update to the iOS 4 ( i think>) , I lost all of the photos that I had in the camera roll album folder , now I have loads of photos there that I do not want to loose ! I know there should be a way of getting them back from the backup but how ? Plus to prove even more that they are still there somwhere , when I connect it to the iTunes on my PC (Windows Vista) , under the yellow section bar it shows there are 315 (1.26 gb) photos on my device...but when I disconnect it and go into the album , there are 0 ! Now I have been reading about this online and people say that you basically take the images off your pc and sync them back onto the phone...but I havent got them saved on my pc anywhere...so where are they? PLEASE HELP me out on this one ,
thank you in advance.

The only place they may be is in a previous backup from before the restore. No Apple tool that I know of accesses these files within the backup file. There are reportedly some 3rd party tools that can get to the photos imbeded in the backup. The other option is to restore the old backup and then import the camera roll via iphoto or some other tool.
If you have no copy of the old backup, I think you are out of luck.
As you know by now, the iPhone's camera roll is treated as a digital camera, not as part of the sync.
For the second post, if you'd like Apple to add the import to the sync process, you can request that via the www.apple.com/feedback web site.
Thanks.

Fresh Install (10.9.1) Unable to create OD accounts after crash and reboot

I have a real big issue and I was hoping if someone could help me out or point me in the right direction.
I have installed a new Server (10.9.1) for a client and everything has been working fine for over a month now, DNS resolving, users being able to login etc, no issues at all.
But today (last night) the server crashed and they rebooted it, and today when i try to add a user I get an error:
existing connection is not authenticated: password change denied
I OK it then Cancel the adding, but find the user being added (bizarre!)
When I try to setup the user email on the server for testing, I get an error with password being wrong, and I can't change the user password, with reset password the drop down just stays there and I have to cancel it.
As a note, all current users within the OD are working fine. And as a test I tried to change a password for a current user and getting the same issue above. They are not mobile accounts, the server is being used for Email, Cal, Card, VPN and AFP only.
I have had this issue before when installing a fresh server and the way I fixed it was to delete the OD and start again, but this time I have many users with a lot of emails/data so I need to be able to fix it rather than starting again.
I have checked the DNS, flushed it, rebooted to no avail. Also I have cheked and tried fixes that have been posed on this form but most are talking about migration erros, even so they don't seem to work.
Has anyone else had this issue? and fixed?
Mac mini 2012 16GB 10.9.1
Server 3.0.1

Process with success:
unzip the packet in: C:\APEX
1. Install:
@apexins SYSAUX SYSAUX TEMP /i/
2. Change to password:
@apxchpwd,
3. Run apex_epg_config.sql
On windows:
@apex_epg_config.sql (page 30, the guide of intallation)
Important:Replace SYSTEM_DRIVE:\TEMP by C:
E.g.: @apex_epg_config C:
After this, follow the next steps
4. ALTER USER ANONYMOUS ACCOUNT UNLOCK;
Finish! Just execute apxldimg.sql script if you is upgrading from a preview release.
Now try the connect on the browser IE6 o later:
http://localhost:8080/apex/apex_admin
Then create your workspace.
Edited by: [email protected] on 10/03/2009 11:59

Why would Dreamweaver CS5 become inaccessible on a Vista 64/SP2 system after install and reboot?

Here's the scenario:
1) I install a purchased, valid Dreamweaver CS5 instance on a machine running Vista 64/SP2
2) The installation goes perfectly -- no errors or warnings whatever. The proper startup menu items are created
3) I successfully launch Dreamweaver after install -- it works perfectly
4) I reboot
5) I try to re-launch DW
6) I get a bizzare system message saying 'Windows cannot access the specified device, path or file.'
Note that my virus checker is Avast, and I cannot see that it has touched any of the Dreamweaver files, and further note that every other of the dozens of applications i have installed have installed and run perfectly.
What the heck is going on with Adobe Dreamweaver (Which, by the way, installed perfectly on another machine using this exact, same OS image -- i upgraded my hardware a while back)

I'm surprised you've never experienced this with other software installations. It's so typical of Windows' annoying UAC introduced in Vista. The first time you run software after reboot, you have to right click to run with admin level permission status so you can write to and save files on your HD which are necessary for the software to run on your system. Afterwards, Windows remembers and usually permits you to start the software normally.
Nancy O.

Ipad 2 won't turn on after freezing and rebooting...

So this is what happened. I was playing "Lili" and halfway when I got to the second area after the begining of the game, the game started to act weird, the controls skipped and I couldn't control it well, so I pressed the home button and it froze. I tried to reboot the ipad and I did it by pressing the two buttons as only pressing the wake/sleep button did not work. It started up normaly but then I tried to play again, this time it did not pass from the first few images of the developer and it froze yet again. This time however when I pressed the reboot the apple icon showed very dimly then it disappeared followed by the battery empty icon, you'd think it would need to recharge but the thing is, the Ipad still had more than half battery when this happened. Do I have a brick? I tried charging it for more than 20 minutes but still nothing...

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

HT3964 my computer displays only a blue light on the screen after booting (and rebooting)! How can I fix this?

There is a blue light on the screen of my mac book pro and the computer will not display anything! Does anyone have any advice/recommendations!?

For Safari you could try clearing its cache and history via Settings > Safari.
For Safari and your other apps you could close them all completely and then see if they work when you re-open them : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Audigy 2 value and crash after installing and reboot

recently i bought the audigy 2 value model sb0400 sound card for the second time after i build myself a dream custom computer. Following installation i ran into a problem that reared its ugly head previously on my prior system that i eventually got so tired of trying to figure out that i returned the card. Whether i talk about the attempted installation on the old computer or the installation on the new computer there is one ever present problem of the computer crashing and not ever loading windows at all after installation. The installation of the drivers and bundled up software all appears to complete successfully prior to rebooting however when the comp is rebooted.........nothing a black screen appears instead of the windows xp loading which ends up never ever appearing. I would be very very greatful to anyone who might have a solution to this because in no way do i want to return the audigy card for the second time especially since absolutely everything i use in terms of sound is from creative 7. speakers and all.
Best regards

Say again? I have that box. I have my optical put in, but I cant get dolby. Is this card suppose to decode dolby or not? I'm talking about XP, not vista.

How do I reinstall firefox after uninstalling and reboot when it tells me to reboot the computer and it's already been done?

OK, so generally my entire problem started because i am constantly facingan irritating "bad request" or something like that with xbox forums, like if I chose to restore my session for example, on FireFox version 3.6.20, which I only use because I don't like/understand the tab addtions and this appears to be the most updated version prior to it. So, I continued to uninstall it, I did a reboot of my computer, and proceeded to the site from which I downloaded this version, filhippo.com. Norton anvtivuris confirms nothing wrong with the set-up file, so i proc3eed to install, only to get hit with "Your computer must be restarted to complete a previous uninstall of Firefox. Do you want to reboot now?" WHY?! I've ALREADY completed this step! I tried a system restore in attempt to fix/set back this operation, and didn't make any difference. I'm on Windows 7, Ultimate, 64 bit, and because of this I now can't install ANY version of Firefox! What am I supposed to do about this so I can reinstall the browser?? if anyone has any possible info, please e-mail me/leave a reply back as soon as possible! Thank you.

As stevejobsfan0123 said by two years ago in this same discussion
Put it in Recovery Mode.
http://support.apple.com/kb/HT1808

Error Starting Database after Installation and reboot

Hi all,
After installing Oracle 10g on Redhat and restarting the system i am getting the following message where i try to start the database:
"SP2-0642:SQL*PLUS internal error state 2165, context 4294967295:0:0
Unable to procced
Database <database name> not started"
the Listener starts ok
any idea or any help?
Kindly

The listener file is created and the listener it is started showing 1 instance.
Actualy this is what i have:
Listener.ora file :
# listener.ora Network Configuration File: /u01/app/oracle/product/10.1.0/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.1.0)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = Dias)(PORT = 1521))
Listener output after executing "lsnrctl start" :
[oracle@Dias oracle]$ lsnrctl start
LSNRCTL for Linux: Version 10.1.0.2.0 - Production on 22-MAY-2004 11:33:41
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.1.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.1.0.2.0 - Production
System parameter file is /u01/app/oracle/product/10.1.0/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.1.0/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dias)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.1.0.2.0 - Production
Start Date 22-MAY-2004 11:33:41
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.1.0/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.1.0/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dias)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@Dias oracle]$
dbstart output after executing "dbstart" :
[oracle@Dias oracle]$ dbstart
SP2-0642: SQL*Plus internal error state 2165, context 4294967295:0:0
Unable to proceed
Database "alisida" NOT started.
info alisida

OS X Mountain Lion crashes immediately after login and reboots.

Help please.

HI,
Yesterday there was an outage with both FaceTime and iMessages at the server end.
Has it been working up until then ?
9:15 PM Monday; November 19, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Stuck at "Finding Purchased Items" even after update and reboot

I have been unable to sync my iPad for several weeks. Itunes gets to "Find Purchased Items" then hangs. I've left it running overnight, but still nothing. I updated the software to the latest version (the one that allows sharing) and still nothing. Rebooted and still nothing. I know iTunes is completely frozen because I can't even return to it in Explorer (i'm using the Windows version).
What can I do to be able to start syncing my iPad again? It seems like ITunes is really becoming an Achilles Heel for Apple products.
Any help is much appreciated since I've bought several new apps and can't install ANY of them.

I was having the same problem on the iPad 1. I am on the latest iOS (5.1.1) and the latest Lion (10.7.4) and latest iTunes 10.6.1 (7).
Tried to sync for the first time in months. whenever it gets to 3 of 7 "finding purchases," iTunes completely hangs and I have to force quit.
I deleted iBooks on the iPad and then right clicked on the iPad in iTunes and did a BACKUP (option is set to backup to iCloud btw).
Once this was complete it sat on "WAITING TO APPLY CHANGES", for almost an hour.. eventually i was impatient, and tried an option change, and hit apply and it got past the screen and fixed it all.
Once all this was done, it was backing up/synching etc. very quickly.
Hope that helps anyone else who got stuck more recently than the thread origin!

Lost CSA in tray after intsall and reboot

Similar Messages

Maybe you are looking for