Lost MacBook Pro showing locked in find my iPhone.

I recently discovered that we had lost our MacBook pro. We are not sure of the exact lost date. When we checked today on Find My iPhone app it says it was locked on March 26th. Does this mean if someone found it they have locked it? How can we track the last location of it?
Thank you

This sounds silly, but while in Find My iPhone, click on the Play Sound button. Hopefully you will hear it beeping under the sofa.
Have a nice day.

Similar Messages

Lost macbook pro, how can i find it ?? help !!!

my macbook pro is lost , how can i find it. i didnt turn on my findmyiphone on icloud !

Do you have a Pro Support actived and a Location Service?
Do you have a "Find My Mac" in iCloud?
If you don't have any of this, will be hard to find your Mac!
Check in your iCloud if your Mac was localized. If show like "offline", click in "Lost Mode". A Access Code is necessary to unlock your device posteriorly. If you not have one, a new 4 number code is necessary. See instructions in iCloud help. If anybody turn-on your Mac, it enter in "locked mode" and nobody can use it and you can find it!
Alternatively, you can back to airport or call and check in "Lost & Found" department if anybody find your computer!
Good luck!!!

HT4759 how do i get icloud on my macBook pro so i can find my iphone?

How do I download ICloud on my MacBook Pro so that i may pick up my iphone that was missed place?

Unless you have the 10.7.2 or better operating system you cannot use Icloud, if you already have the operating system you already have icloud.
So far as finding your phone goes, you would need to have activated "find my phone" on your phone already, if you haven't you will be unable to locate your phone. If you have you can go to the icloud.com website and locate your phone, assuming of course it is turned on and connected to the network.

TS4006 How do I add iphone4s to iCloud's "find my phone"? I turned on macbook pros system prefs to "find my phone", turned on iphone4s's "location services" and set up iCloud, etc. iPhone4s still won't show-but macbook does show. It receives gmail, weathe

How do I add my new iPhone4s to iCloud's "Find my iPhone"? I followed the iCloud instructions and turned on Macbook Pros' system prefs to "find my mac", turned on iPhone4s's "location services" and set up iCloud, etc. In the "Find my iphone" tab of my new iCloud account (on my Macbook Pro) my iPhone4s still won't show—but my macbook does show. I had my iPhone4s set up at the phone store (2 days ago) and It receives gmail, my contacts and calender entries, the weather, etc. I installed the "Find iPhone" app from iTunes on the iPhone4s, synched to iTunes, even reset the phone, but the only device that gets located is my Macbook Pro. I can send a "sound" message to my Mac (and the Mac recieves it) but unable to see the iPhone4s from my Mac, let alone send any message. Any suggestions to get the iPhone4s device to appear in iCloud?
Thank you in advance for your help.

OK, I figured it out...I deleted the iCloud account off my iPhone (Settings, iCloud, Delete Account), and then added iCloud back in (Settings, iCloud, SignIn)....and then my email (iCloud) and "Find my phone" features worked! Nice!!!!

MacBook Pro shows up twice under Shared in finder sidebar once as PC

This just started today. I have my iMac and MacBook Pro networked through Airport Extreme. Today my MacBook Pro shows up twice under my iMac finder sidebar. First icon is itself (MacBook), second icon is PC. Both with the same name. Get info shows the second icon as PC Server. I cannot connect to the PC icon, which I'm assuming is a good thing.
Why would this suddenly happen, and how do I get rid of it? I've restarted airport, repaired permissions on both machines. Checked to be sure that only AFP is check under File Sharing on both. Network preference pane WINS shows no servers connected on Airport or Ethernet, etc.
Anyone?
Appreciate any help with this. I'm definitely not a networking expert

Ok, ive had this problem for ages and i think ive pretty much figured it out, your computer is showing your macbook over your network and through Bonjour (apples own wireless connection) Still not sure why it always shows it as a PC though, or as a server...
Anyway, I ive found where it originated from, if you go to System Preferences>Sharing, at the top you will see your computers name and underneath it will say "Computers on your local network can access your computer at:" and its name will be whatever the 'PC server' is called on your finder sidebar, in your case "tosha". You can test it by changing the name to something like "tosha1" by clicking the edit button, in may cases the extra shared computer will disappear, but, after a while it will reappear and will now have the new name. =[
Sadly I dont know how to stop this but I suggest you take screenshots and go to an apple store, tell them about the problem and hopefully they will have an answer for you, they know everything! And even if they dont, check their machines to see if they have the problem, and if they dont, look at the settings and try and find why.
Im sorry I cant be of much help but im getting closer to the bottom of this and im sure its linked to bonjour! Ill keep you posted if anything else happens!
p.s. Im not a networking expert either! Im just as stumped as everyone else!

I've lost my iphone with passcode lock and find my iphone lock on but the wifi n cellular data was turned off so no way i can trace it so the only question remains is will the person who finds it be able to unlock it and use it as his own ?

i've lost my iphone with passcode lock and find my iphone lock on but the wifi n cellular data was turned off so no way i can trace it so the only question remains is will the person who finds it be able to unlock it and use it as his own ?
is it possible to change imei number?
i've tried for so many times n still the phone is offline so i've set it to offline mode with my message but it never shows the last location why?

If the device is found, nobody can use it without knowing your Apple ID and password.
The phone will only show it's location if it is connected to cellular network or Wi-Fi. If those options are switched off, you can't locate the phone.
With iOS 7, Find My iPhone includes a new feature called Activation Lock, which is designed to prevent anyone else from using your iPhone, iPad, or iPod touch if you ever lose it. It starts working the moment you turn on Find My iPhone in iOS 7. With Activation Lock, your Apple ID and password will be required before anyone can:
Turn off Find My iPhone on your device
Erase your device
Reactivate and use your device
This can help you keep your device secure, even if it is in the wrong hands, and can improve your chances of recovering it. Even if you erase your device remotely, Activation Lock can continue to deter anyone from reactivating your device without your permission. All you need to do is keep Find My iPhone turned on, andremember your Apple ID and password.
What steps should I take if I misplace my device?
If you ever misplace your device—whether it’s just lost or you think it may have been stolen—you should put it into Lost Mode immediately using Find My iPhone.
Lost Mode locks your screen with a four-digit passcode and lets you display a custom message with your phone number to help you get it back. You can also remotely erase your device if needed, and your custom message will continue to display even after the device is erased.
While Activation Lock works in the background to make it more difficult for someone to use or sell your missing device, Lost Mode clearly indicates to anyone who finds your device that it still belongs to you and can’t be reactivated without your password.
To put a device into Lost Mode, sign in to icloud.com/find from a Mac or PC or use the Find My iPhone iOS app.
For more information, read what to do if your device is lost or stolen.
copied from iCloud: Find My iPhone Activation Lock in iOS 7

MacBook Pro shows 356gb of App Storage

My MacBook Pro shows 356gb used for apps but when I click Get Info for the Applications folder it only shows 9gb used.
9gb to 356gb is a significant jump.. Is there any way I could delete this or find the 300gb+ excess of storage is?

Probably you do not have 356 GB of apps on your computer, so you can try reindexing your hard drive. Follow the steps given in this Apple support article to do so -> Spotlight: How to re-index folders or volumes - Apple Support (you have to reindex "Macintosh HD").

My MacBook Pro shows a grey screen at start-up how do I fix this problem?

My MacBook Pro shows a grey screen when I try to login and won't go onto my homepage. Why has this happened and how do I fix it?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My Ipad 4G was stolen, it had a passcode lock on it and it won't show up on find-my-iphone, WHY??

I lost my ipad 4G, it had a passcode lock on it and it wont show up on find-my-iphone, why is that? Lost it a few hours ago and dont know why it isnt showing up at all on icloud's find my iphone. I know that it will not work if there is no wifi available but I thought that since my ipad had the cellular data activated it was constantly ON even if it had the smart cover on, or am I wrong? Icloud's find my iphone app was def activated on it. I am not sure what to do at this point...am I out of luck?

These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
 Cheers, Tom

My Macbook Pro shows the apple and spinning wheel at start up but won't continue startup. Any Help would be appreciated.

My Macbook Pro shows the Apple and spinning wheel at startup but will not continue the startup. Does anybody know how to get past this, so the computer continues to startup?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My MacBook Pro shows the "Macintosh HD" icon on the desktop but my MacBook Air does NOT have the icon on it's desktop. Is this normal? If not, how do I remount the MacBook Air disk icon on the desktop?

My MacBook Pro shows the "Macintosh HD" icon on the desktop but my MacBook Air does NOT show the icon on it's desktop. Is this normal? If not, how do I remount the MacBook Air "Macintosh HD" icon on it's desktop?

Is it showing in the Finder?
If so, then this is normal.
Cheers,
GB

HT2711 MacBook Pro shows circle with diagonal line

MacBook Pro shows circle with diagonal line

It means it can't find the operating system. And no MacBook Pro can run Mac OS X 10.3 or earlier.
The minimum operating system for any original MacBook Pro is some version of 10.4.4. Some later ones can only run 10.10.
Please read
http://discussions.apple.com/docs/DOC-6413

MacBook Pro constantly locks up, any ideas?

My MacBook Pro will lock up for no apparent reason at any time, either while in an application or just moving around within the desktop/dock. I've tried reinstalling the OS (Snow Leopard) per the recommendations of the local Genius Bar and that seemed to work for a few days but it's doing it again. Anyone experience this or know of a fix?

/Library/Preferences - trash the finder plist file.
Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 empty the trash and restart your computer.
I've tried reinstalling the OS (Snow Leopard)
Please correct your system information as you confirmed you are still using "Mac OS X (10.4.10)"

Every morning when I awaken my MacBook Pro, I come to find that my Safari browser has been closed. How to fix this? I don't want to lose anything I have possibly typed in a site that I have left to finish working on for later.

Every morning when I "awaken" my MacBook Pro, I come to find that my Safari browser has been closed on it's own. How to fix this? I don't want to lose anything I have possibly typed in a site that I have left to finish working on for later. I checked system preferences and everything seems to be checked appropriately as well as for Safari's preferences.
I am not sure what's going on, because Safari only just recently started doing this and I haven't downloaded anything, nothing out of my regular computer routine. As well, I upgraded to Mavericks when it came out and I have the last version of it too. I can't imagine that Safari would close simply because I don't have or want to upgrade to Yosemite. I am holding off on the upgrade for a bit, because I heard Final Cut Pro 7 can't be run on Yosemite. While I could partition my drive, I really don't want to. Mavericks is fine for right now : )
Okay sooooo...back to Safari...what the! Please help and thanks for any replies ahead of time!
I Hope All Is Well In Your World : )
Nyna

There's an Apple help page on the DNS problem - at http://support.apple.com/kb/TS3408
The first thing to try is changing your DNS settings - and for that you need to open System Preferences, then the
Network section.
In Network - click on Advanced - then the DNS tab
under DNS servers - use the + button to enter two extra lines
either these, from google dns
8.8.8.8
8.8.4.4
or from OpenDNS
208.67.222.222
208.67.220.220
then click OK & then 'Apply'
You would need to do that seperately for the Cable (Ethernet) settings and Wireless (Airport)

IMessage on MacBook Pro shows i'm my friend. My friend's photo and name shows in every conversation instead of mine. How do I fix this?

iMessage on MacBook Pro shows i'm my friend. My friend's photo and name shows in every conversation instead of mine. How do I fix this?

I am using my own Apple ID. (My father doesn't even have one). I seem to recall having to select a contact or something to assign to my iMessage app when I used it the first time on my iPad. I checked the settings and it is set to my apple ID and correct email address. Any other ideas?

Lost MacBook Pro showing locked in find my iPhone.

Similar Messages

Maybe you are looking for