Lost part of created form

I lost a whole section of my form when I checked box that came up "Rating Scale Cropped".
How can I retrieve that part of the form?

Hi,
Would you mind sharing your form with me ([email protected]) to allow me to investigate this issue? Instructions on sharing your form can be found here:
http://forums.adobe.com/docs/DOC-2462
Thanks,
Brian

Similar Messages

I lost the ability to order and hide site columns if i use custom content type with a custom Create Form

I have a team site collection and I want to add a new App of type Issue Tracking list. so I did the following:-
From the site collection I created a new App of type issue tracking.
Then from the site collection I created a new Content type named “CustomIssue” which has its parent as “Issue” content type.
I went to the Issue tracking list and I changed the default content type from Issue , to the new “CustomeIssue” content type.
I open the site collection using SP designer and I created a new Create form for my Issue tracking list based on the "CustomIssue" content type and I select to have the Create form as the default form when creating an item.
Everything till this point worked well. But when I open the “customIssue” content type , and I re-order the columns and I hide some columns, this was not reflected inside the custom Create form …
although when using the default content type and the default create form you can control the order of the fields and to specify if certain fields hold be hidden inside the Create form.. so can anyone advice on this please?

Hi,
According to your post, my understanding is that you lost the ability to order and hide site columns if i use custom content type with a custom Create Form.
I try to reproduce the issue, the result is the same as yours.
As a workaround, if I modify the custom content type form the site setting, and then change the NewForm as the default form, it will change the column orders.
However, if I use the new created form as the default form, it will remain the original orders.
I recommend that you modify the custom content type form the site setting, and then reset the NewForm as the default form.
The result is as below:
Best Regards,
Linda Li
Linda Li
TechNet Community Support
ok thanks for the explanation ,, but what if i want to change the order and hidde some fields in the future ,, do i have to chnage the defualt create form again ...

Issue with parts of a form that repeat with a button

I have added several parts to a form that a user can click to add a new item. The parts are tables that have rows that repeat that are added by clicking a button. This addition of rows works fine. However I am having two issues that I need some assistance with....
1. I have added a table nested within a table. Rows added as a user clicks to add a row. This works fine up to eight rows. Rows beyond eight do not flow to the next page. They seem to be added at the bottom of the second page of added rows (can't see them to know if they adding).
2. The same table, when adding rows, creates rows over a separate table below it. I am not sure why the next table does not get pushed down by adding rows to the table above it.
I am a LiveCycle newbie so any help would be greatly appreciated.
Thanks.
Shane

The subform is not Flowed in the form.. Select the root node (for Example Page1) in the Heirarchy and set the Type to Flowed to address both the issues.
If your Table is wrapped in a Subform, make sure for the Subform you have checked the "Expand to Fit" for Height in the Layout tab.
Thanks
Srini

Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported.

SharePoint 2007 custom (VS 2008) solution is upgraded to SharePoint 2013 using (VS 2012). I followed this approach.
I had created new empty project (solution) in SharePoint 2013 using (VS 2012) compiled and deployed successfully. All safe controls are registered in the web.config file. After deploying solution i Restarted IIS also, still getting this error. How to resolve
Error
Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe. Correlation ID: 5d217c9c-1827-7083-80cd-e095a30befee.
Show Error Details
Hide Error Details
[UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe.]
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.GetTypeFromGuid(Boolean isAppWeb, Guid guid, Guid solutionId, Nullable`1 solutionWebId, String assemblyFullName, String typeFullName, Boolean throwIfNotSafe)
at Microsoft.SharePoint.WebPartPages.SPWebPartManager.CreateWebPartsFromRowSetData(Boolean onlyInitializeClosedWebParts)
<menu class="ms-hide" id="MSOMenu_WebPartMenu"><ie:menuitem id="MSOMenu_Minimize" text="Minimize" title="Collapse this web part." type="option"></ie:menuitem><ie:menuitem
id="MSOMenu_Restore" text="Restore" title="Expand this web part." type="option"></ie:menuitem><ie:menuitem id="MSOMenu_Close" text="Close" title="Close this Web Part. You can still
find it under closed Web Parts section in the insert ribbon. These changes will apply to all users." type="option"></ie:menuitem><ie:menuitem iconsrc="/_layouts/15/images/DelItem.gif" id="MSOMenu_Delete" text="Delete"
title="Delete this Web Part from the page. These changes will apply to all users." type="option"></ie:menuitem><ie:menuitem type="separator"></ie:menuitem><ie:menuitem iconsrc="/_layouts/15/images/EditItem.gif"
id="MSOMenu_Edit" text="Edit Web Part" title="Change properties of this shared Web Part. These changes will apply to all users." type="option"></ie:menuitem><ie:menuitem id="MSOMenu_Connections"
text="Connections" title="Show connections options for this Web Part. These changes will apply to all users." type="option"></ie:menuitem><ie:menuitem type="separator"></ie:menuitem><ie:menuitem
id="MSOMenu_Export" text="Export..." title="Export this Web Part. These changes will apply to all users." type="option"></ie:menuitem><ie:menuitem iconsrc="/_layouts/15/images/HelpIcon.gif" id="MSOMenu_Help"
style="display:none;" text="Help" type="option"></ie:menuitem> </menu>

Hi Ashok,
According to your description, my understanding is that you got an error after you re-built a SharePoint 2007 solution with VS2012, and deployed it.
Make sure the Namespace and Type Name are consistent across all files where indicated. Also with matching case sensitivity. Verify web.config file and assembly in GAC or virtual directory bin folder in post deployment.
More information, please refer to the link below:
http://roykimsharepoint.wordpress.com/2013/04/27/classic-web-part-errors/
Here is a similar post for you to take a look at:
http://stackoverflow.com/questions/1689707/sharepoint-web-part-type-could-not-be-found-registered-as-safe
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe.

We have an SharePoint services 3.0 installation that uses custom web parts on 100s of subsites. The custom web parts on any website is presenting this error
Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe.
This past weekend we decided to create a new database server and migrate the databases to the new server in an effort to retire an old box.
INitially we attempted to go through the configuration wizard which didnt do anything but add a new database server to our farm. What we have done is remove the new database server from the farm and use an alias on the SP server to continue to use
the same name but actually get its data from the new database server.
Everything works with the site except these custom webparts.
Any thoughts on where to go to first, should i redeploy what i think are the webparts from VS 2005 (solutions are VS 2005 slns.)?
Tony Spaulding

You need to make Safe Control enteries in your web.config for the particular web application.
Open web.config
Locate the SafeControls Tag
Make a safe control entry
<SafeControl Assembly="Assembly name, Version=1.0.0.0, Culture=neutral, PublicKeyToken=d8eb6481d8b4beec" Namespace="your webpart namespace" TypeName="*" Safe="True" />
In order to find the assembly details, Open the GAC. Right click on your dll and then click properties.

ADF create form problem

Hello forum, I know - I am back again. But I am having all kinds of issues developing this ADF BC create form. Given the following scenario, can somebody please explain how he/she would set out to create the following ADF create form?
You a have a db entity call it table with fields1 through 10. During any create transaction, one of field1 or field2 or field3 must be present together with field4 through 10. That is, field1 can be entered along with fields 4 to 10 or field2 can be entered together with fields 4 to 10 or field3 and fields 4 - 10. Field10 can have four exclusive choices (say a, b, c, d) and should default to d (radio button). Field3 should store the name of an uploaded file. At no time can fields 1, 2 and 3 be entered. It is either one or the other.
Here's how I set out to develop this and have been running into all sorts of problems from Row inconsistency issues to 500 Internal errors. I created an unbound select one Radio component with three choices to display either field1 or field2 or field3 depending upon the radio button selected. I used the switcher facet to hide fields 1 and 2, show field 3 if radio button 3 was selected. So whenever radio button 1 was selected, field1 would be displayed, then fields 2 and 3 will be hidden. Initially, I used regular input components to display fields 1 to 3 and then try to map them back to the database but couldn't figure out how to do this. I then followed John's suggestion to use transient entity attributes. I did this but still couldn't figure out how to access their values so I could set the relevant db columns accordingly.
Because of the way this requirement is, I had to drag and drop field1, 2, and 3 in three different single drag and drop operations, then drag and drop the entire collection with the option to include the submit button, delete fields 1 through 3 in another operation. This created 2 different iterators in the pageDef file. I am not an expert yet on ADF but maybe this might be part of my problems. Trying to use two different iterators to insert into a single table during a single DML operation. But then again both iterators are bound to the same entity. I am not sure anymore.
Is anybody kind enough to take a look at what I have so far? John? Frank? Steve? Anybody? I am trying to make that switch from oracle forms to ADF. This is actually my first ADF form and so far it has been very frustrating. I really need help on this guys!!
Thanks

Thanks for the suggestion Frank! Just so I understand you, the ADF Faces text component that I am adding would be in addition to the radio select one component? Then if you click on radio button 1, enter data in the text field, that action should bind it to field1 and similarly for the other fields when radio button 2 or 3 is clicked? In this case I am assuming that I do not have to display the actual db fields1 - 3 on the form?
This would be fine for fields1 and 2 (though field2 would require one to enter a substantial amount of text - on average a 1000 characters as opposed to field1 that has a maximum length of 40 characters). Field3 however is different because it should be an inputFile component in order to download OS files and store in the database. Thus the ADF Faces text component might not be able to handle this without substantial additional java code.
Thanks again for your suggestions. I really appreciate it!

Saving part of fillable form as non-fillable pdf

I have created a form in LiveCycle Designer.
The top part of the form needs to be filled in by one office, and then once the fields are filled in they need to be "locked" for editing and sent on to a third party.
The third party needs to have the option of filling out the bottom part of the form without being able to modify the top part.
Is this possible?
I see in other threads that someone created a 'Lock all Fields' button. However, I don't know how to write script that would customize the button to lock only certain fields.
Also, I tested that document; the Lock button does work, but when you save the form and email it, the form fields become unlocked.
Are there any ideas on how to make this button work so that once the fields are locked, they stay locked?

Here are some postes that can help you....
http://forums.adobe.com/message/2134982#2134982
http://forums.adobe.com/message/2125137#2125137
the first URL has one samle PDF attached which has "Lock All Fields" button at the bottom. I checked the script and it is prepared to handle each subform individually withe the line of code in 'click' event myScriptObject.LockAllFields(form1); the user is passing entire form in this case but if you pass just the subform name that you wish to lock that will work....incase you need to lock more than one subform you would modify code to following...
myScriptObject.LockAllFields(sub1);
myScriptObject.LockAllFields(sub2);
rest will be automatically taken care....but to open up fields that are locked you need to modify the function LockAllFields() under myScriptObject variable and add new function in the same location gvie it a new name ....like OpenAllFields()....but instead of currentElement.access
="readOnly"; you would use currentElement.access ="open"; which will help unlock the fields in that subform.
then your final script may look like under the "Lock/UnLock Fields" button.
myScriptObject.LockAllFields(sub1);
myScriptObject.LockAllFields(sub2);
myScriptObject.UnLockAllFields(sub3);
myScriptObject.UnLockAllFields(sub4);
Hope that helps.
Good luck,

Infopath Form Web Part not showing form

Hello,
I recently edited a list form in a InfoPath 2010 and published it to my site. When clicking on "Add new item" it works fine. The new form shows up and all is well. The idea though was to enable the form from a separate page by using
the InfoPath Form Web Part. We have other forms setup this way on our site that work fine, but for some reason, when I added the web part to the page, pointed it at the list and set the custom content types (only single option anyways as the list is
built on a custom content type) nothing is displayed within the web part.
I can't find any difference between my form and the already created forms, but as I didn't create the ones that are working I may have missed some setting. There is no error, no message, just a blank web part... Actually, that's not true. When I
check in the page I see nothing. But when I publish it, I see only a close link and a bit of a header div.
If anyone would happen to have seen this before, know what it is or know how to fix it I would be greatly appreciative.
Thank you.

Hi David,
From your description, you published an InfoPath form to SharePoint list, and it worked well in the list. However, when you added an InfoPath form web part to another page, it displayed as image.
I could not reproduce the issue, I just selected list and content type, left all other settings as default, it displayed as expected. Did I miss anything during reproducing your issue? Did you make any customization to web part or InfoPath form?
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Error using Quick Create Form on custom entity

Hello,
I have a new relationship between opportunity and a custom entity. Now I want to use quick create form for my custom entity. Then from the opportunity form, I click on the "new" action inside the custom lookup field but nothing happens and I have
a JavaScript error... The quick create form has no JS code. The contact quick create form works fine. And the quick create form for my custom entity works if you click on the Add button on the main ribbon... so I'm lost... I've tried also with Chrome and IE,
same result. May be I'm doing something wrong...
Any help will be very apreciated.
Thank in advance to everybody.
The error:
<CrmScriptErrorReport>
<ReportVersion>1.0</ReportVersion>
<ScriptErrorDetails>
<Message>Unable to get property 'getAttribute' of undefined or null reference</Message>
<Line>16</Line>
<URL>/_common/JsProvider.ashx?ids=1545465446-1759665639-1968334880-202661451-1025323794-1793205875-1547461133-1992083491-1000289424-159335543-1376927455-1030632819-1181113682-1314140682-1194605645-1039841082-513446117-1625018438-1460109179-1088147315-706656670-342519603-542820515-1946640899-1603536461-468302605-1405388298-1220618931-511599809-1264077421-1188909594-783705869-374257838-502328314-2050812538-512064351&ver=1313516505</URL>
<PageURL>/main.aspx?etc=3&extraqs=%3fformid%3d5b6f6723-db6e-40f2-9ca5-b78678b1076b%26id%3d%257b4F3786B4-4C0E-E411-93F6-0050569D1A22%257d%26rof%3dtrue%26rskey%3d200436436%26setlastviewed%3dtrue%26theme%3dOutlook15White&pagemode=iframe&pagetype=entityrecord&rof=true&rskey=200436436</PageURL>
<Function>anonymous($p0){var$v_0=this.getLookupSearchText();this.$2a_4($p0,this.$$d_$3n_4);var$v_1=this.get_$1G_4(),$v_2=$get($v_1),$v_3=$v_2.getAttribute("entityDisplayName"),$v_4=Mscrm.InlineEditUtilities.getLinkedDataObject($P_CRM($v_2)),$v_5=String.format("glob</Function>
<CallStack>
<Function>anonymous($p0){var$v_0=this.getLookupSearchText();this.$2a_4($p0,this.$$d_$3n_4);var$v_1=this.get_$1G_4(),$v_2=$get($v_1),$v_3=$v_2.getAttribute("entityDisplayName"),$v_4=Mscrm.InlineEditUtilities.getLinkedDataObject($P_CRM($v_2)),$v_5=String.format("globalqctimestamps_{0}",$v_1),$v_6=null;if(!IsNull($v_4)&&$v_5in$v_4)$v_6=$v_4[$v_5];var$v_7,$$t_A,$$t_B,$v_8=($$t_B=this.$2Y_4($$t_A={val:$v_7}),$v_7=$$t_A.val,$$t_B);Mscrm.GlobalQuickCreate.GlobalQuickCreateBehavior.launchGlobalQuickCreate(this.$1Z_4,$v_3,parseInt($v_2.getAttribute("entityTypeCode")),$v_6,$v_8,$v_7,$v_0)}</Function>
</CallStack>
</ScriptErrorDetails>
<ClientInformation>
<BrowserUserAgent>Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.2; WOW64; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729)</BrowserUserAgent>
<BrowserLanguage>en-US</BrowserLanguage>
<SystemLanguage>es-ES</SystemLanguage>
<UserLanguage>es-ES</UserLanguage>
<ScreenResolution>1364x768</ScreenResolution>
<ClientName>Web</ClientName>
<ClientTime>2014-09-01T16:13:52</ClientTime>
</ClientInformation>
<ServerInformation>
<OrgLanguage>3082</OrgLanguage>
<OrgCulture>3082</OrgCulture>
<UserLanguage>3082</UserLanguage>
<UserCulture>3082</UserCulture>
<OrgID>{8704CF11-2D0C-E411-93F6-0050569D1A22}</OrgID>
<UserID>{3DDB30DE-B80C-E411-93F6-0050569D1A22}</UserID>
<CRMVersion>6.1.0.581</CRMVersion>
</ServerInformation>
</CrmScriptErrorReport>
Francisco

It looks like product error message.
If it's happening on production, You can suppress the error message. Settings -> Administration ->Privacy Preferences -> Select Never send error report to Microsoft
Regards,
Prabhu
Prabhu G

Can I open LiveCycle created form on a Blackberry?

I created a form in LiveCycle with expandable fields and other lovely features now our VP is saying he can't open it on his Blackberry. This is a disaster.
Is there any way to get this to work?

Yes and no. No in that the integrated PDF viewer for mobile devices do not support Livecycle (XFA) PDFs. Yes in that Adobe does have additional platforms (see link below) for viewing and entering text fields for mobile devices. However I sense that you lack these options so I might suggest, if you have the software, to create a PDF with either Acrobat Pro or you can use Adobe's new FormCentral which might be included in your version of Acrobat Pro if you have it. Both have options for optimizing PDFs for mobile viewing; however you might be somewhat limited with the other features you have made in the form. But at the end of the day Acrobat created forms, for the most part, can be viewed on mobile devices. I have a somewhat limited expereince with the integrated PDF viewer in BB so I am not 100% sure if all features like expanded fields in an Acroform would work.
http://www.adobe.com/products/livecycle/mobile.html

Can I print a specific part of a form, wrapped in a subform?

Hi,
I'm a rookie in LiveCycle, and could use some help!
I have created a form, with several radiobuttons, to show/hide futher questions.
Now I want to give the end user, the possibility to print out only part of the form. More specific, a part wrapped in a subform.
Is there somehow I can do it with Javascript?
I'm using LiveCycle ES2.
Thanks in advance.

Hi,
you can exclude objects (like subforms, fields etc.) from printing by manipulating the relevant property, but this will also hide all objects included in this object.
A script in the prePrint event of an object can control if this object and all its chilc objects will be printed or not.
if (xfa.resolveNode("form1.#subform.checkBox").rawValue eq 1) then
$.relevant = "-print"
else
$.relevant = "print"
endif

Is there a way to create form fields to tab into and type and or drop down selection fields in pages as you can with microsoft word?

is there a way to create form fields to tab into and type and or drop down selection fields in pages as you can with microsoft word?

No

Error while Creating form on remote Database

Hi All
I m getting error while creating form on remote database thru
Database link
Line/Column Error
7099/21 PLS-00454: with a returning into clause, the table
expression cannot be remote or a subquery
7099/9 PL/SQL: SQL Statement ignored
7749/16 PLS-00454: with a returning into clause, the table
expression cannot be remote or a subquery
7749/9 PL/SQL: SQL Statement ignored
and statement at line specified is insert statement. and at end
of insert statement Returning caluse is there as follows
RETURNING ROWID INTO "_ROWID";
This returning clause is causing error. Does anybody knows how
to handel it??
Thanks
Yogesh

Yogesh
I haven't seen the ora-03116 problem.
What version of Portal are you running? Are the databases at the same version? Does your table have longs or anything strange in it?
Can you query the table via the synonyms and link in sqlplus as the application schema? This is a good test because it eliminates Portal.
You should try setting up synonyms etc for the emp table. If you still get the problem then Oracle may be able to replicate it. If not, then there's sth funny about your table maybe.
I agree with Vishnu about creating everything in sqlplus. I create all my links and synonyms in sqlplus. They are all public. I have 2 synonyms: one takes you over the link the other takes you to the right schema. It's flexible and it works.
data database: D grants to P (local schema) on table T
public syn T = D.T (sys) (get the right schema)
portal dbase : public db link to data database connecting as P
public syn T = T@dblink (sys) (over the link)
P is a schema created in both databases.
Test is: P in portal dbase can "select * from T" and gets the right data.
I never, ever refer to a schema when defining a form. ie. never P.T or D.T or whatever. I always refer simply to a synonym. For the above my form would be defined simply on the table T.
Hope this helps
Greg

How to override the create method invoked by a create form?

Hello everyone, I'm using ADF Faces and have the next question:
How can I override the create method which is invoked by a create form to preset an attribute in the new row (the preset value is not fixed, I have to send it to the method as a parameter as it is obtained using an EL expression)?
In the ADF guide I read how to override a declarative method (Section 17.5.1 How to override a declarative method), but this explains how to do it with a method that is called by a button. I don't know how to do the same with a method which is called automatically when the page is loaded.
I also tried overriding the view object's createRow() method to receive a parameter with the preset values but it didn't work, I believe that was because the declarative create method is not the same as the view object's createRow. This caused the form to display another row from the viewobject and not the newly created one (I also set the new row into STATUS_INITIALIZED after setting the attribute).
Well, I hope my problem is clear enough for somebody to help me.
Thank you!

Hello,
I'm not sure you can do it with standard generated Create Form.
In your view object you'll need to create your own create method with parameters, publish it to client interface and invoke instead of standard generated create action in page definition.
Rado

I've changed my iphone 4. when I've synchronized if with my itunes I lost part of my apps, in fact, it didn't restore like the other iphone. Somebody do can help me?

I have a problem with my new iphone 4. I'he changed it (before I had another Iphone 4)
when I arrived at home to synchronize it, only part of the apps synchronized. I lost part of my apps like TomTom. Somebody have any idea how I can recoup my lost apps?
thank you everybody for your help! I don't want to pay again for this apps again!!!
Eli

apps can only ever by bought 1 time using the same AppleID
make sure the itunes on the computer you sync with and the iphone have the appleID set the same
and if you must redownload the apps if bought using the same appleID you will not be recharged for redownloading them

Lost part of created form

Similar Messages

Maybe you are looking for