Infopath Form Web Part not showing form

Hello,
I recently edited a list form in a InfoPath 2010 and published it to my site. When clicking on "Add new item" it works fine. The new form shows up and all is well. The idea though was to enable the form from a separate page by using
the InfoPath Form Web Part. We have other forms setup this way on our site that work fine, but for some reason, when I added the web part to the page, pointed it at the list and set the custom content types (only single option anyways as the list is
built on a custom content type) nothing is displayed within the web part.
I can't find any difference between my form and the already created forms, but as I didn't create the ones that are working I may have missed some setting. There is no error, no message, just a blank web part... Actually, that's not true. When I
check in the page I see nothing. But when I publish it, I see only a close link and a bit of a header div.
If anyone would happen to have seen this before, know what it is or know how to fix it I would be greatly appreciative.
Thank you.

Hi David,
From your description, you published an InfoPath form to SharePoint list, and it worked well in the list. However, when you added an InfoPath form web part to another page, it displayed as image.
I could not reproduce the issue, I just selected list and content type, left all other settings as default, it displayed as expected. Did I miss anything during reproducing your issue? Did you make any customization to web part or InfoPath form?
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Similar Messages

Items to display in list view web part not showing the items setup

Hi, I have the following issue. I have a list view web part, but the web part is showing more items that the ones setup in the: Number of items to display in list view web part for this view.
It is because that works when using datasheet view and not a normal view? Is there any technical documentation from Microsoft supporting this?

thank you for your answer. It is interesting that the mobile view with the items to show in the mobile view doesn't work in the webpart, but it works when you are using datasheet view, but if you uncheck to activate the mobile view, then, the webpart doesn't
show information, so, it works partially because one part works and not the other.

Summary Links web part not showing correct column number

Here is my scenario. I have a simple two server dev farm that is using a snapshot of production data. I have migrated the 2010 content db over and everything is running fine. One quirk I have noticed is with the summary links web part. If I add the webpart
to a page, in the configuration settings for the webpart you can create named groups and the next setting is how many columns you want the links to appear in. When I select lets say "4" columns, and I create four groups. When I save and check in
the web part only shows "3" columns instead of 4.
For Example.
I create groups: Group 1
Group 2
Group3
Group 4
In the webpart configuration I select "display number of columns" = 4
When I save that setting and look at the web part the groups will appear as:
Group 1 Group 2 Group 3
Group 4
when in reality if the column setting is = 4, I would expect:
Group 1 Group 2 Group 3 Group 4
So it appears it is behaving as if whatever column number you select, what is displayed is N-1.
Has anyone else had this happen in SharePoint 2013? The same webpart doesn't behave this way in the 2010 production environment where dev gets its content. Any help would be great.
Thanks,

Hi againeyuga,
Yes, I have tested in my SharePoint Server 2013 with December 2013 CU and it works fine. For your environment, I recommend you install the SP1 update.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Forms Web - Icons not showing up

Hello,
I'm running a form on the web, and I have several iconic buttons. The Oracle Developer 2000 book says that icon image files must be in .gif format, and must reside in the same directory as the html page. So I converted my icons to .gif and placed in the required folder.
On the icon property for each button, I am not specifying a path, just the filename with no extension.
The icon is not showing up. I tried setting the icon filename via set_item_property(button_name, icon_filename, filename)
ON_NEW_BLOCK_INSTANCE and placing the path to where the html file is located. The icon will not show up.
Help?
Marie
null

Hi ,
U have to update the in registry.dat file
set default.icons.iconpath=/icons/
and map this virtual directory /icons/
in web listener setting with Physical
directory of ur Icons.
null

SharePoint 2010 List View Web Part not showing for read-only users?

Hello all,
I have List View Webparts on my Blank Web Part page, and it's not showing for Read-Only users.
Is this intended by Microsoft or is it a bug?
Thank you!

Hi,
According to your post, my understanding is that the read only user could not see the list view web part.
Per my knowledge, the issue may be cause that the user do not have the proper permission for the list.
1. Check whether the user can access the list.
2. Check whether the user can view all the items instead of partial items in the list.
3. Check whether there are some fields refer to other lists or terms, especially the lookup field or managed metadata filed.
If that is the case, make sure the user can access the lookup list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

SharePoint 2010 list view web part not showing conditional formatting

when I create conditional formatting in custom list is working fine & when it call through web part page (Data view web part) conditional formatting not showing. data is showing without conditional formatting.
Dinuka M.

When you use conditional formatting on some page it is writing inline CSS codes inside that page. thats why when you create a new page and add the same web part to that page, you must edit that page to apply conditional formatting to that
web part.
Best Regards, Mustafa Yılmaz MCITP, MCPD | www.mustafa-yilmaz.org | www.sharepointciyiz.biz
When you say edit the page, do you mean edit it in SharePoint Designer, or in SharePoint itself. And is it a case of just editing, then saving the page and it will apply the conditional formatting, or is there a specific property you need to edit, and if so,
what is it?

What's Happening Web Part not showing number of discussions on Community Site

Hello,
I have the What's Happening Web Part on the landing page of a community site in SharePoint 2013 Enterprise On-Premises.
The What's Happening Web Part shows number of members and discussion replies correctly, but does not show any discussions.
Any idea of where to start troubleshooting?
Thanks in advance.
Tamara Bredemus SharePoint Minion...working up to Maven

Hi Aries,
Thanks so much for your response. Here are the anwers to your questions
1. is there any customization process on this webpart? - No customizations
2. have you try to restart the community feature from the site feature option in site settings? - Not yet. Thanks for the suggestion. This is a Communities Site Collection. All of the other Community features are working. Should I ask the Farm Admin to restart
the communities feature?
3. have you tried to add another what's happening webpart at newdummy site? No I haven't. Great suggestion. Kinda embarresed that I didn't think of this. Must have been tired that day.
4. is there any steps that you did before?, because in my lab box seems the webpart works well. - I tried deleting it from the page and then adding it back, but to no avail. Will try a test site.
Thanks again for taking the time to answer. I will test and then mark your reply as an answer if all works out.
Tamara Bredemus SharePoint Minion...working up to Maven

List View Web part not showing all available views for list

We have added a list view web part to a page, and we get the "Current View" link in the web part...which is configurable when modifying the actual web part.
What we'd like to see (instead of having to click the ellipses button/context menu to get the other views) is the views displayed horizontally like when you are viewing the list itself.
When viewing the list itself, we see "All Items" "View 1" "View 2", etc.
Is this possible in the list view web part to display all available views in a horizontal/breadcrumb layout? Please advise.

The below works via alert, just need to now assign data to a <DIV> or element for display.
Trying this in simple webpart code snippet to get back all views:
    <script>
    var viewCollection = null;
        function runCode() {
            var clientContext = new SP.ClientContext.get_current();
            if (clientContext != undefined && clientContext != null) {
                var web = clientContext.get_web();
                var listCollection = web.get_lists();
                var list = listCollection.getByTitle("MyListName");
                this.viewCollection = list.get_views();
                //var viewInfo = new SP.ViewCreationInformation();
                //viewInfo.set_title('MyView');
                //this.viewCollection.add(viewInfo);
                clientContext.load(this.viewCollection);
                clientContext.executeQueryAsync(Function.createDelegate(this, this.onQuerySucceeded), Function.createDelegate(this, this.onQueryFailed));
        function onQuerySucceeded() {
            var viewInfo = 'Tasks list current views: \n\n';
            var viewEnumerator = this.viewCollection.getEnumerator();
            while (viewEnumerator.moveNext()) {
                var view = viewEnumerator.get_current();
                viewInfo += view.get_title() + '\n';
            alert(viewInfo);
        function onQueryFailed(sender, args) {
            alert('Request failed. ' + args.get_message() + '\n' + args.get_stackTrace());
    </script>
    <a onclick='return runCode();'>Click here</a>

Calendar Web Part not showing events except in edit mode

We are unable to view calendar events in the calendar view except in edit mode. When you view the page normally, the calendar shows the current day, but you cannot change the month or add new events.
If you change the view to all items you can see all the events but its not in the calendar view which is preferred.
Any ideas?

Hello,
SharePoint 2010 has some limitations with its group calendar. I recommend checking out this topic to help resolve your issue: Work Around SharePoint
2010 Group Calendar Limitations.
Hope this helps,
- Kemp Brown [MSFT]

Show all items in data form web part when no filter value

I have connected a XSLT list view web part with a data form web part.
The list view web part sends the connection parameter and the data form web part filters the corresponding content.
I need the data form web part to show all the data in the list when the connection parameter is empty.
Please let me know how i can implement this.

Any ideas !!

How to simply add custom property to a HTML Form Web Part?

Hello.
Is it possible to add a custom property (like a date-field) to a HTML Form Web Part with help of JavaScript? I do not want to use Visual Studio / Nappa etc. Is this possible in an easy way?
Thanks for your help.

Hi,
Based on your description, my understanding is that you want to count the date between today and the latest event date.
You can create a calendar in a page firstly, then add a content editor web part rather than the html form web part, as html form web part can't place the Jquery element.
Then you can firstly read the date field value of the calendar list using JavaScript Client Object Model and then calculate the difference between two date values using Jquery. You can add the code directly in the content editor web part.
Here are some detailed code demos for your reference:
Get SharePoint calendar list field value using JavaScript Client Object Model:
<script src="http://code.jquery.com/jquery-1.9.1.js"></script>
<script>
$(document).ready(function(){
SP.SOD.executeFunc("sp.js", "SP.ClientContext", retrieveListItemsCal);
function retrieveListItemsCal() {
var clientContextCal = new SP.ClientContext.get_current();
var oListCal = clientContextCal.get_web().get_lists().getByTitle('Calendar');
var camlQueryCal = new SP.CamlQuery.createAllItemsQuery();
AllItemsCal = oListCal.getItems(camlQueryCal);
clientContextCal.load(AllItemsCal);
clientContextCal.executeQueryAsync(Function.createDelegate(this, this.onQuerySucceededCal), Function.createDelegate(this, this.onQueryFailedCal));
function onQuerySucceededCal(sender, args) {
var listItemInfo = '';
var listItemEnumeratorCal = AllItemsCal.getEnumerator();
var htmlCal = '';
while(listItemEnumeratorCal.moveNext()) {
var oListItemCal = listItemEnumeratorCal.get_current();
htmlcal= oListItemCal.get_item("Start Time").format("MMMM d, yyyy"));
break;
function onQueryFailedCal(sender, args) {
alert('Request failed. ' + args.get_message() + '\n' + args.get_stackTrace());
</script>
Calculate the difference between two dates:
http://stackoverflow.com/questions/2609513/jquery-calculate-day-difference-in-2-date-textboxes
Thanks
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Jerry Guo
TechNet Community Support

InfoPath Form Web Part breaking page left alignment

I have tried both a wiki page and a web part page and met with the same results. I am using the Oslo theme. I add two web parts (SharePoint List Filter and Listview App) and it works perfectly and the page looks normal.
When I add the InfoPath Form web part (I have tried different layouts and different zones) it causes the left alignment of the page to be way off.
See pics below.
Any suggestions?
Any help would be really appreciated!!

Hi,
We have reproduced this issue. The page left alignment is broken and the page is rightward after the InfoPath Form web part is added. It happens both on the wiki page and the web part page.
Thank you for bring this issue to our attention, your time and efforts on this matter are highly appreciate. It could be a potential issue in SharePoint 2013.
In our behalf, we will put your finding to our suggestion box and report it internally. If there is any update, we will keep you informed in this thread.
Thanks.
Tracy Cai
TechNet Community Support

Create Calculator with the InfoPath Form Web Part

Hi,
I have gone through these steps
https://msdn.microsoft.com/en-us/library/office/ee559624(v=office.14).aspx#sectionSection1
on SharePoint 2013, and everything works except only one parameter will send data. The last one set is the only one that will work.
Any ideas?
Thanks!

Change your button not to use the Submit type but rather to use the Rules and Custom Code type, then add a rule that does a submit plus whatever other actions you're doing. Add a Close action as well if you want, but you should also then be able
to set the form web part to close on submit. All of my forms are built like this, and I use them all in form web parts (I'm in love with them).
Oh, another thing I do is when my user submits, I switch to a new view that looks nice and has a submit confirmation. At the point, the form doesn't even need to be closed, but I do have a close button just in case.
SharePoint Architect || Microsoft MVP ||
My Blog

Code in HTML Form Web Part

Hello,
I have no coding background whatsoever but I've recently found 2 pieces of coding that:
1). changes the default calendar overlay colors to colors I have picked out
2). collapsing Tasks with Subtasks by default
Both actually worked great when I added the code to the HTML Form Web part but here is the problem:
We use two different Project communication tools - SharePoint and PWA.
In PWA I only used the code to collapse the tasks with subtasks - worked like a charm.
In SharePoint, I have the project calendar which has the code for color change (works great) and a task list that I would like it to show collapsed as default (did not work).
Question: can I not have two "pieces" of code doing two different things on one page in SharePoint? Am I just putting the code in wrong?
Thanks for your help.

Thanks for your response. For whatever reason, I cannot post a screenshot. Support could not provide a solution as well... in any case. I basically added a web part in SharePoint: HTML Form Web Part, selected 'edit web part', clicked on
'Source Editor' in the Form Content and inserted this code to change the calendar overlay colors:
<style type="text/css">
.ms-acal-color6{
BACKGROUND-COLOR: #F77F00
.ms-acal-selcolor6{
BACKGROUND-COLOR: #F77F00
.ms-acal-apanel-color6{
BORDER-COLOR: #C3B7AC; BACKGROUND-COLOR: #F77F00;
.ms-acal-color4{
BACKGROUND-COLOR: #7FBA00
.ms-acal-selcolor4{
BACKGROUND-COLOR: #7FBA00
.ms-acal-apanel-color4{
BORDER-COLOR: #C3B7AC; BACKGROUND-COLOR: #7FBA00;
.ms-acal-color7{
BACKGROUND-COLOR: #3D8E33
.ms-acal-selcolor7{
BACKGROUND-COLOR: #3D8E33
.ms-acal-apanel-color7{
BORDER-COLOR: #C3B7AC; BACKGROUND-COLOR: #3D8E33;
.ms-acal-color1{
BACKGROUND-COLOR: #00A3DD
.ms-acal-selcolor1{
BACKGROUND-COLOR: #00A3DD
.ms-acal-apanel-color1{
BORDER-COLOR: #C3B7AC; BACKGROUND-COLOR: #00A3DD
.ms-acal-color5{
BACKGROUND-COLOR: #0072C6
.ms-acal-selcolor1{
BACKGROUND-COLOR: #0072C6
.ms-acal-apanel-color1{
BORDER-COLOR: #C3B7AC; BACKGROUND-COLOR: #0072C6
</style>

Sometimes JavaFX form (BorderPane) does not show correctly

We have a problem with a JavaFX application running on Java 7. Sometimes a form (BorderPane) does not show correctly – it seems to be transparent (i.e. content previously shown at the same place is still visible). Controls seem to be present and respond to events – e.g. we can close the form by blindly clicking the appropriate button. Once the issue happens it is persistent, i.e. next time we open the form, it behaves the same.
We have no reproducible scenario leading to the issue. It just happens here and there – we have not been able to identify any pattern yet.
Additional information:
the form (BorderPane) is loaded during application start-up but it is not shown initially,
to show the form we remove previous contents from a StackPane and add the form instead,
to hide the form we do the reverse.
Do you have any ideas how to diagnose the problem? Where to look first? What kind of diagnostic code could we put in the application that would help us?

I am unaware of any such issue being reported previously.
Without a reproducible test case, you are unlikely to get much assistance.
Other than the creation of a minimal test case which reproduces the issue, I could not even advise how you might go about diagnosing and fixing your issue.
There were many bug fixes implemented for Java 8.
I advise you to upgrade your test environment to the latest Java early access release (currently Java 8u40) and test to verify if your issue replicates in that version.
If the issue still reproduces, create a bug report which includes your test case and full environment details.

Infopath Form Web Part not showing form

Similar Messages

Maybe you are looking for