Lost Video IN\Out put

I have lost my video in/out via firewire. I have check and the firewire reads my DSR-11. I have control (play, ff, rw) but i am not recieving any video or audio.
Audio/Video settings-----DV NTSC 48khm
Device Control-----------Firewire NTSC
View
Video Play Back---NONE
I have just incurred this problem..
What setting have i reset??
Help

Mmm... ok. you need to trash your quicktime receipts...
go to:
Mac HD > library > receipts
in there you will see a few files called QuickTime xxx.pkg where 'xxx' is a number, eg 603...
Drag ONLY the numbered receipts to your trash can... don't trash any other quicktime receipts, ie QuickTimeMPEG2.pkg etc... ONLY the numbered ones...
empty trash...
You must then manually update quicktime again from the apple site, not software update...
Before you do all this, check your quicktime receipts and let us know which numbered ones you have in there...
good luck.

Similar Messages

Why is there no video out put from my mini display port ?

Why is there no video out put from my mini display port ?

Hi Ben,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides a lot of great information and troubleshooting tips that can help you resolve the video issue with the external display that’s connected to your iMac.
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Cheers,
-Jason

Out-puts for mac mini

while sitting by my computer the other day i realized that my music stopped playing and my screen lost all video. my screen said "no input". the computer was not "sleeping", it just stopped all out-put the only way i can get it to go back on is to restart the computer. this happens at random times while i am using it. what is going on?
Message was edited by: acedelman

Hi,
I'm not sure, but I would try a few things.
Check if your system light is still on?
Check if you can ping your system from another computer, if available. You should find the IP address of your computer before it blanks-out on you.
Is the bottom very hot? Try turning on its side when it's running. Maybe it's overheating? This is just a guess. I always run mine on its side, as the bottom gets hot.
David

GeForce2 MX - MS Starforce 818 S Video - TV Out not working ?

Hi,
I'm using MSI GeForce2 MX Nvidia MS Starforce 818 which have an S-Video video out port in it. A few while back, I try to use this TV Out port for the first time with the S Video cable given upon purchase. Since I have no idea how to use this TV Out port before, I was skimming through everything, and found out that I can use it by clicking on the "Display" properties of windows, go to the "Settings" tabs, and I can choose the display that I want to use, whether a regular monitor I'm using, or to the tv when the S-Video TV Out cable is plugged in. Yesterday I try to do the same thing, and suddenly on the "Display" properties, on the settings tabs, I can't choose where do I want the display to be, and plugging in the S-Video cable only cause the monitor to blank out.
I haven't tried uninstalling the video card, since I can't find the cd that comes with it when I bought the video card about 4 years ago.. and I can't seem to find the drivers on the net as well. I'm using win xp sp 2.
Anyone know how can I use the TV Out port aside from the "Settings" tabs of the "Display" properties of windows ? I'm lost right now, and dunno what is wrong.
Sorry if my english is hard to understand, do let me know if there's anything u can't understand.
Thanks,
Djoni

Now that Nview detects my TV I was hoping that maybe I could select the clone options and use the dual monitor option of my card. Nope, Nview detects the monitor and the tv but all the other options are greyed out. So I cannot use anything else than Standard (Dual View).
Ok. I think i have same problem. I have solved it by connecting my analog monitor to to DVI output with DVI to analog conector that came with the vga card. And it worked. Only now i have another problem. Vga card can't recognize my tv as PAL/G but as M/NTSC. Everytime i reboot my computer it goes back to M/NTSC. I am using detonator drivers 40.72 and with original MSI drivers it worked OK.

HT201471 Does anyone know if video comes out of the headphone jack like the Itouch does on a Ipad3?

I was wondering if the video out put comes out of the headphone jack on a Ipad3 like it does on a Itouch?

No. Video will need to be shared via Home Sharing, Airplay or using an AV adapter.

HT4108 What is required to use the video composite out on the iPhone 4. Left and right audio works ok

What is required to use the video composite out on the iPhone 4 The left and right audio works ok

Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES

Video Cuts out After 20 Minutes

With my iPod video coming soon I am preparing movies to put onto my iPod. I convert DVDs into MPEG1s, then MPEG1s into uncompressed AVIs because QT can take audio and video from AVIs. My final uncompressed AVI is perfect, audio and video all the way through. Now, when I convert this AVI to an iPod format movie (320x240), a QT movie (.mov), or a MPEG4 (I have tried all three), it seems to work fine, no errors or anything. Then when I play the result, the audio goes all the way through, but the video cuts out to a white screen after 20 minutes. Is this fixable or do I have to wait for a QT update? By the way, the movie is 90-100 minutes long.

You are converting a DVD (MPEG-2 format) to MPEG-1 format and then to .avi file. This new (now compressed twice) file is compressed again (conversion to .mov).
Too many steps and way too much re-compression.
You should search for some software that will export from MPEG-2 to the iPod settings.
The white screen issue is probably caused by broken time codes (the MPEG-1 file, I suspect).
I've seen new software releases designed for iPod video export (both Mac and Windows versions). Maybe you should try a few of them.
Can the iPod battery hold out long enough to play 100 minutes of video?

NO AUDIO OUT PUT DEVICE

I DELETED MY AUDIO OUT PUT DEVICE BY ACCIDENT COS I HEARD STATIC IN THE SOUND AND NOW I HAVE NO SOUND THE LITTLE SPEAKER SYMBOL HAS A RED CIRCEL N AN X IN IT SAYING NO AUDIO OUT PUT INSTALLED IT CAME WITH MY LAP TOP N IM TOLD ITS A FREE DOWN LOAD BUT WHEN I GO TO REAL TEK SITES ITS ALL CONFUSING CAN ANYONE PLZ HELP AND WHERE ON THE PUTER TO I GO TO SEE WHAT VERSION OF WINDOWS IS ON IT

Hello mbradford1199. I understand that you are being told that you have no audio output device installed.
There are two possible soundcards for this notebook and each has its own driver. There is a Realtek device and a Contexant device. First try to install the Realtek device, here is a link. If that driver does not work for you I suggest trying the Contexant driver. Here is the link.
If neither of these drivers work I'd like to see if Windows is detecting a sound card at all. Try the following.
Click Start, type "Device Manager," and press Enter.
Do you have a "Sound, video, and game controller" section? If so, expand it.
List everything you see here.
I will keep an eye out for the results. Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Reports / intranet/ In some detail, the user will input a date range from and 2 and will out put the records in the int

Hello there,
I am totally green in web development.
my goal is to, for the user will input a date range from and
to and will out put the records in the intranet when they press a
button.
However, the good news is: I have experience in programming.
I have written applications for desktop in VB>NET and I
understand RDBMS /sql concepts .
But CF and WEB development is new to me.
My current projects involves in connecting to DB and testing
it. (it works fine)
And outputting reports by to a intranet page. (records)
i need help on how to start this asap. I will even do some
practice at home.
Tools I have at work
• Development server(test)
• Home site.
• Toad for db connection.
• Html reference guide
• Cf dummies book.
How can start my projects.
(ex. Create cf, outputpage?)
seriously, I am new to this.
Thanks.

Well, I had a really nice response with some concepts and
ideas for you to practise on etc, but these dumb forums timed out
and I lost it all
If you want to pop me an email we could probably do a few
exercises together that way - or even by MSN Messenger if you want.

Audio and video is out of sync!

when I record audio and video together with my isight built in camera on my macbook pro with either quicktime pro, photobooth or imovie, when I play the clip back the audio and video is out of sync! like watching a kung foo movie. I've tried everything, I've taken my book into see a "Genius" at thew mac store and he said to me that the isight is made really for video conferencing and is really not supposed to be fully in sync? Uhh thats weird, so mac makes a product and puts it on all their laptops and it only sort of works?? I've been on the phone with apple care, did a bunch of things like disk utility repairs on permisions, then used the startup disk to do another permisions repair. I've uninstalled quicktime pro and re-installed it a couple of times? If anyone could give me some advice that would be great! I'm a little frustrated as you can probably see! thanks
cheers
m

Welcome to Apple Discussions, m
See if any of the suggestions offered here reduce your sync quality problem enough:
http://discussions.apple.com/thread.jspa?messageID=7089133&#7089133
If, after making certain that your Mac is running well, has plenty of free space on the correct drive, etc., your sync is still not close enough, you can manually re-sync any parts that are unacceptable to you using either QT Pro or iMovie.
If you check carefully, you will see that not even pro video is always perfectly synced. It is a lot of work to get things "nearly perfect," but, with a bit of practice, it doesn't take long to get things "close enough" for me.
I use the same simple process with either QT Pro or iMovie, so you can use whichever you find easiest. Whichever you use, keep the original AV clip safe and *_work on a copy_* in case something goes wrong.
If you do not already know how, here is my process, but you can adjust for your workflow:
(1) Copy of the audio track.
(2) Add the audio track copy to the AV file.
(3) Silence the original audio and work on audio copy.
(4) Insert small blank audio clips (or split and slide if using iMovie) if needed to make the audio later.
(5) Cut small bits out of quiet parts (or split and shorten in iMovie) if needed to make audio sooner.
(6) Repeat until satisfied and delete any tracks no longer needed.
(7) Save the adjusted AV file.
(8) Enjoy!
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Why do my audio and video get out of synch?

No matter what sort of video I'm trying to play: Youtube, a movie on DVD, a movie on an external hard drive, etc, after a short time the audio and video get out of synch with each other. This is often, though not always, signaled by a short audio phrase being repeated (eg: "I don't know, Scully, how about you? about you?"). I can solve the problem by quitting the app and starting it back up but it will eventually screw up again.
I'm using a MacBook running OS 10.6.8 with a 2.26 GHz Intel Core 2 Duo processor and 4 GB 1067 MHz DDR3 memory.

MASMAS
The first thing that we need to know are the properties of what you are putting on the Timeline. What works in another software does not necessarily work in Premiere Elements. Each program has its own supported formats.
a. What is the file extension for this file? .MOV or .MP4?
b. Does the iPad describe it as 1080p or 720p?
c. If you open Premiere Elements 12 and go to Edit Menu/Project Settings/General, what do you see for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio, even if those field appear to be grayed out.
Two immediate troubleshooting avenues are going to be in the direction of...
a. Project settings not set up to match the properties of the source from the iPad. Then we would start a new project and set the project setting manually before importing your video. Details for manually setting the project preset are in the following.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
b. The iPad video being recorded with a variable frame rate instead of a constant one...the remedy then would probably be to take your video in a program like HandBrake to change the variable to a constant frame rate. And after that, import the corrected video into the Premiere Elements project which has the correct project preset (preferably set manual to assure the correct result).
Please see what you can put together in the way of video details, and we will sort this out.
Thanks.
ATR

How to add storage location in the MBBS transaction out put

Hi experts,
I need to add the storage location in the MBBS Transaction report
out put . what will be the procedure. Is there any standard settings or else I have to copy the program. Plz help me.
Thanks&Regards,
Srinivasa rao.V

I've been able to store the contents of my camcorder on the Mac's HD. I've tried importing the clips from there and get the same result, whether I try to import one or several clips at once, it replies with the same error message as to the missing storage location/instructions. Interestingly, it will nonetheless import the first (or only) one of the clips that I highlight on the import screen.
When you suggest dragging the files, from where do you mean? The clips per se don't appear in the finder, but only on the import page. The finder show only various fragmented files that aren't complete clips (eg. separate video and index, even sound files), which is too much of a pain to deal with...
It's true that my original iMovie library was created from an upgrade, but I have since deleted the contents and attempted to reload the clips. Are you suggesting deleting the library completely and starting again, or should I just try creating another event and using that? Don't see why that shoudl work better than "updated projects", but perhaps it's worth a try...
Thanks again

"not enough space on out put media"

i have been using dvd studio pro and it worked flawlessly until now. i have been getting "not enough space on out put media" on the log. im using a 15" mbp and a recently acquired 20" imac. can anyone help me out?
thanks

It sounds as though you are trying to put too much video onto your DVDs.
If this is the case you will have to lower the bitrate at which it is encoded.

My videos play with video/audio out of sync in itunes, what gives?

All of my itunes video library, including those purchased from the itunes store, play with the video/audio out of sync. However, if I use Quicktime, they play fine. I just noticed this recently with the latest update to itunes.

I found the solution using google search. Basically you have to downgrade your itunes software to version 10.7 and rebuild your library. Just type in iTunes audio/video out of sync on google search and you will find the solution I am talking about. I didn't think it would actually work because supposedly apple knows what it's doing but not in this case. Why they would put out a new version of itunes that makes none of your videos play right, even ones you purchased from itunes is beyond me but I'm sticking with version 10.7 for as long as I can.

Ijust got my new ipod video,and when putting videos onto it,,,,,

the audio doesnt come out,so i went on the help faq and it said i needed a third party video converter to put the videos on it.So does anyone here know of any?And if you do can you tell me how to operate it?Thank you in advance

Here's one of many:
Hopefully in answer to the many posts on “how to get various video formats onto your iPod” I have put together a summary of applications I use. I have tried a few others with varying amounts of success (some of which are free) - I have finally plumped for the software produced by Xilisoft as providing good quality video relatively affordable cost for use withPC’s and numerous MS operating systems. The link below takes you to their site which not only allows you to download trail versions of their software but also has a comprehensive set of tutorials and FAQ's for their iPod video conversion software.
I have regularly used these applications to convert various file formats to iPod friendly video. They are simple to use although frequently processor and RAM hungry:
Use Xilisoft iPod Video Converter if you want to:
[*]Convert various video file formats to MP4
[*]Convert most audio file formats to MP3
[*]Extract audio from video file and save to MP3
[*]Encode several files simultaneously
[*]Pause encoding process to run other CPU time consuming programs at any time
Supported file formats:
Video:
[*]MPEG(mpg, mpeg, dat, vob); WMV; ASF; AVI; QuichTime(mov, qt); MPEG4(mp4); 3GP; DV(dv,
dif); Real Video(rm); Animated GIF(gif - decoding only); Macromedia Flash(swf - decoding
audio only);
Audio:
[*]MPEG Audio(mp2, mp3); WMA; WAV; AU; MPEG4 Audio(m4a); Real Audio(ra); OGG; AAC; Raw
AC3(ac3); NUT Open Container Format(nut);
To convert DVD's to an iPod friendly video format:
Use Xilisoft DVD to iPod V4:
[*]Just pop the DVD in your drive select compression variables (default settings work well) and sit back!
All these products are available on a "try before you buy basis", yes there are applications for XP which are free but and may work just as well but I have converted many hours of video for my iPod without hassle using the Xilisoft products (no I don't work for them!). Check there web site HERE
MB67

Lost Video IN\Out put

Similar Messages

Maybe you are looking for