Lots of little files & lots of media files on the same XSAN

Hi,
Wanted to ask your guys opinion on this.
We work in an environment where we have tens of 100,000's of image sequences where each frame is roughly 12MB residing on a SAN and a single array with large uncompressed QuickTime files.
We tried Metasan, even had the folks from Switzerland log in to the system on quite a few occasions and it appeared the Metasan system couldn't handle tracking all the files on the system. The drives by themselves could handle the speed when the software was removed from the equation, but with the software controlling the drives it just couldn't. Not even low bandwidth tasks like digitizing DV video @ 3.6MB/sec.
So moving to a new XSAN environment, do you think we'd have to separate the image sequence data on a separate array from the large media files?
Thanks for any responses.

Jamie T wrote:
Hi,
Wanted to ask your guys opinion on this.
So moving to a new XSAN environment, do you think we'd have to separate the image sequence data on a separate array from the large media files?
Thanks for any responses.
If you have such a specific situation in which you are creating the same size file over and over again with a consistent (or near consistent) size, you sound like a good candidate for multiple volumes. You can define the one volume's parameters to exactly match the file size being written. You, in theory, should get both speed and disk efficiency benefits by tailoring the file system to the size of the files.
Also, if your frames are 12 MB and your media files are a couple hundred, then you are dealing with the polarizing file sizes.
At the very least, it is worth a shot to experiment with tailoring the volume to the specific situation. If you have the luxury to experiment, I would say do it.
Hope this helps

Similar Messages

How can I plott data from a text file in the same way as a media player using the pointer slide to go back and fort in my file?

I would like to plott data from a text file in the same way as a media player does from a video file. I’m not sure how to create the pointer slide function. The vi could look something like the attached jpg.
Please, can some one help me?
Martin
Attachments:
Plotting from a text file like a media player example.jpg ‏61 KB

HI Martin,
i am not realy sure what you want!?!?
i think you want to display only a part of the values you read from XYZ
so what you can do:
write all the values in an array.
the size of the array is the max. value of the slide bar
now you can select a part of the array (e.g. values from 100 to 200) and display this with a graph
the other option is to use the history function of the graphes
regards
timo

I have files in my iTunes media folder that somehow are not in my library. How do I get iTunes to scan my media folder and add missing files to my library without making a copy of each file in the same location?

I have files in my iTunes media folder that somehow are not in my library. How do I get iTunes to scan my media folder and add missing files to my library without making a copy of each file in the same location? If I use add file / folder to library, it scans the folder and then makes a copy of any file that is not in my library in the exact same location; I recal in older versions of iTunes being able to just drag my media folder into my library and it would update missing links.

Only the songs that are connected to iTunes will be copied when you consolidate to a new folder.
Splitting the media folder away from the usual location makes it harder to move iTunes in the future.
Are you go move everything back once you've tidied up or are you going to leave it that way? Either way I'd recommend you create an iTunes folder at the new location, an iTunes Media folder inside that, and consolidate to this new iTunes Media folder. You should also use the option File > LIbrary > Organize Library > Rearrange files in the folder "<Media Folder"> if you have not already done so.
tt2

How can I unlock numerous files at the same time (i.e. photos) so I can make changes (rotate etc)?

Im using Lion on a MacBook Pro 15in (just under two years old) and I would like to know if I can lock numerous photo files at the same time so I can make changes to them. At the moment when I select an entire folder to go through and make changes, ie rotate in Preview, I am told with each photo that I have to unlock it. I am going through photos I took of archival material and have nearly 5000 photos to adjust and make changes to. This small step is taking up a lot of time.
I realise there will probably be a common 'sense' answer to this but it alludes me at the moment so any help would be appreciated.
Thanks

Try this: https://addons.mozilla.org/en-US/firefox/addon/fox-splitter/?src=ss
OR, open a second Firefox window (''Firefox button > New tab > New Window'' or ''Ctrl+N''), load the second site, resize windows side by side.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How do I make Applescript to compress 2 filez with the same name?

Hello guys and thank you for reading this!
I don't know a lot about programming, but i believe applescript can save my life. What I need is.
Detecting 2 files with the same name, but differnt extension. (song 1.jpg, song 1.mp3)
Compressing those 2 files into a single .zip (In the end I would have song 1.jpg, song 1.mp3 and song 1.zip
And that's it! I know its pretty simple, and I've seen the "Create Archive" in automator, but I don't really know how to tell him which files to Compress.
Thanks again!

Hi,
Try this script :
set sourceFolder to choose folder
tell application "System Events"
      {name, name extension} of (files of sourceFolder whose name extension is not "zip")
      my compress2FilesSameName(the result, sourceFolder as string)
      repeat with i in (get folders of sourceFolder) --check in subfolders
            {name, name extension} of (files of i whose name extension is not "zip")
            my compress2FilesSameName(the result, path of i)
      end repeat
end tell
on compress2FilesSameName(tList, tFolder)
      set tnames to item 1 of tList
      set tExtensions to item 2 of tList
      set tc to count tnames
      set j to 1
      repeat while j < tc
            tell (item j of tExtensions) to if it is not missing value or it is not "" then
                  set n1 to (count) + 2
            else
                  set n1 to 1
            end if
            tell (item (j + 1) of tExtensions) to if it is not missing value or it is not "" then
                  set n2 to (count) + 2
            else
                  set n2 to 1
            end if
            set name1 to item j of tnames
            set name2 to item (j + 1) of tnames
            if (text 1 thru -n1 of name1) = (text 1 thru -n2 of name2) then -- same name
                  set tFile1 to quoted form of POSIX path of (tFolder & name1)
                  set tFile2 to quoted form of POSIX path of (tFolder & name2)
                  set zipFile to quoted form of POSIX path of (tFolder & (text 1 thru -n1 of name1) & ".zip")
                  do shell script "/usr/bin/zip -j " & zipFile & " " & tFile1 & " " & tFile2
                  set j to j + 2
            else
                  set j to j + 1
            end if
      end repeat
end compress2FilesSameName
if an archive already exists with the same name (in the parent folder of the files to compress) , the ZIP command overwrite this ".zip" file.
Example with "song 1.jpg", "song 1.mp3" and "song 1.zip" :
If "song 1.zip" doesn't exist, the ZIP command create the "song 1.zip" file.
If "song 1.zip" exist, the ZIP command overwrite the "song 1.zip" file (it will not create a new archive).

I need create a lof of files with the same password with Acrobat Standard 9

Good Morning:
I need create a lot of pdf files with password. After I put all files in a directory and with the Acrobat Writer Version 4 selected this directory and the program Acrobat automaticly put the same password in all the files. After as well, I could select files with the same password and changed the password automaticly of this files.
Now with the Acrobat Standard 9, I don't know make this taskes. My cuestion is "Can I make this things with acrobat Standard 9 or I need other version?"
Thank you

Thank you for your help
Your solution is different from the other members' opinion. ¿Is This option available in the Adobe Standard ? Because I have not found it in Adobe Standard.
Your option is with Edit > Preferences > Batch Processing Security Method "Password Security" and the option of the other members is with Advance > Batch Process.
I have tried to change some pdf files that had password with Adobe Pro, so I tried to remove the security password from the pdf files, with Advance > Batch Process.
I created a new secuence with security through the Option "Whithout Password" but when I executed the secuence, the program showed me a window with this message "OPERATION NO AVAILABLE".
¿Can you help me? I don't kown how I can remove the password of this pdfs, yet.
Thank you in advance.

QuickTime Player 10.1 no more includes the ability to save a movie file in the same format as the original movie after editing it? No, it doesn't!

Since upgraded to Lion, I have to wait for QuickTime Player 10.1 to "CONVERT" every file that I edited in it.
Yes, it might save some disk space for me.(Which is not always the case though.) But it also takes almost 10 times or more as it did when back on Snow Leopard with QuickTime Player 10.0 there I could save any file in the same format as the original movie WITH NO NEED TO CONVERT IT.
Now I have to wait like 10 minutes to delete just a few frames.(The time it takes depends upon the original size of that movie. The larger the longer.) And guess what? If you have two clips originally split up from a movie and sperately getting saved(converted actually) with a loooooooot of time, and you naively added one of them to the other's end and then saved the finished one. It converts AGAIN! Doing so back on Snow Leopard with QuickTime Player 10.0 only takes you even a few seconds only!
Seriously, are we eating Apple or dirt this time?

My existing movies are all the following types straight from FinalCut
Apple Intermediate Codec, 1920 × 1080, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
This particular movie is 6.66 Gb
The new Quicktime player in OS Mavericks converts these to the following format:
Apple ProRes 422, 1920 x 1080
Linear PCM, 16 bit little-endian signed integer, 2 channels, 48000 Hz
And a movie size of 6.48 Gb
It seems obvious from other forum posts this is a planned move so that everything is the "new mobile device" ready state/format. To use Marc Speth's post as material....
https://discussions.apple.com/message/23749558#23749558
this is probably about dumbing down desk top OS to that pf iPhones and iPads. This is not what I paid good money to own a Mac Book Pro for....
Today I rolled all the back to Snow Leopard. Really good move...... All those new features hey? I lost the ability to work in spaces and of course the whole Quicktime debacle.
The rolling back process was easy, restored from a point prior to installing Lion and Mavericks and the only issue was my iPhoto libraries. Thank my stars that I still had back ups that I had not converted yet.... viva la Mavericks...NOT. Apple can keep it.
Unsure if you are just venting or if there is supposed to be a question here. Basically, I assumed this to be Apple's idea of an improvement. That is, I really believe the ProRes 422 codec is a better intermediate codec than the AIC codec but most of my old HDV camcorder family tapes were imported by iMovie (for compatibility with my wife's non-FCP computer configuration) and, like your content, is/remains stored as AIC/PCM MOV files. At first I thought this might be a generalized change affecting all QT X based apps but when I went to check the latest iMovie v10.0 update, became confused when I noted that AIC source files were not automatically updated to ProRes 422 and continue to play natively in the iMovie source media viewer.
I guess this is supposed to be a logical evoluption and we were supposed to have seen the "handwriting on the wall" dating back to when Apple's first released the free ProRess "player" ProRes 422 codec. Still, it would have been nice if Apple had given some warning during the last few years so users could plan and prepare for such a drastic change. For the moment, I am just thankful that AIC remains, at least temporarily, supported nativelyby the iMovie video editor under Mavericks. Thank goodness for small favors.

Downloading several files to the same client directory

Hello Everybody !
My RAP application generates three files : a binary one for microcontrollers programming purpose, a plain text one which is a readable form of the first one, and finally a properties file used to restore the application settings. All three files have to be stored in the same directory on the client machine and this is done by using a service handler as described here : https://www.eclipse.org/rap/developers-guide/devguide.php?topic=resources.html&version=3.0
This mechanism works fine, but pops up three Save File dialogs while one would be sufficient since I could get the destination directory from the first download. Is it possible to save more than one file to the same location with only one Save File dialog? How would you implement this?
Thanks a lot in advance for your help!
Georges

Try using:
tell application "Finder"
set path_2 to quoted form of POSIX path of (folder of (path to me) as alias)
end tell
tell application "System Events"
do shell script "curl 'ftp://user:password@server//www/htdocs/current/l.txt' -o " & path_2 & "l.txt"
end tell
(41158)

Batch replace placeholders to files of the same name?

Hello,
I'm designing a photo slideshow in AE and while I'm awaiting the final images, I'm creating a comp using precomposed placeholders.
I've named the placeholders 'Image_01', 'Image_02' etc. So, if I name the image files to match, can I tell AE to relink all placeholders to the file of the same name? I'm going to have quite a lot of images so this would be such a time saver compared to relinking each one individually!
Thanks

Simply create a dummy image set externally and use that, then swap it out. AE doesn't care what the content is, it only looks for a file path.
Mylenium

Saving a mp3 file with the same bitrate as the original

When I import an mp3 file at a bitrate of f.i. 196 kbps and I alter this file you can choose two options. "save" and "save as". If I choose "save as" I can choose the bitrate etc.
If I however choose the "save" button you should think that it will save the file at the same bitrate as the original. This is not the case. It will only save the file at 128 kbps no matter at what bitrate the original file is.
I think that Adobe can simply adjust this in an update or did I miss something so I can set this myself. Currenly I use the demo version and I am thinking of buying this program because it is very good for what I do and it resembles my old Audition a lot except the lack of multitrack recording.

Hi Piet and Ray,
This is a bug that affects re-encoding an mp3 and overwriting the original. While we don't recommend re-encoding compressed audio data due to generative quality loss, we regret that in this scenario it also introduces bitrate loss.
If you choose "Save As..." instead of "Save," you should be able to export your file as an mp3 at the bitrate of your choice.
Unfortunately, we discovered this bug after Soundbooth had been sent to the manufacturer. We have fixed it internally and if we provide an update, it will be included. I'm sorry about this bug and hope the workaround is not too much trouble.
Thanks,
Durin

How to upload multiple .CSV files in the same time.

Hi Legends,
Can anyone please help me to resolve my issue?
This is very urgent and critical.
Description:
We have two users.1)edw_user_dump
2)prd_udm.
We need to upload the xx.csv file at the same time for these two users in oracle forms.
we have differentiated .csv file name based on the user names.
the main problem is in the sql loader command the xx.csv file name is created but the data is not captured in the server (kentucky) .
Below is my code for the upload.
-- To delete the Part_Mast.log file from the client
DECLARE
pid WEBUTIL_HOST.PROCESS_ID;
v_result PLS_INTEGER;
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
BEGIN
v_result := WEBUTIL_HOST.Get_return_Code(pid ) ;
host('cat /dev/null > /tmp/'||v_username||'_'||'EDW_CF_IO_UPLOAD.log');
host('cat /dev/null > /tmp/'||v_username||'_'||'"CF615 IO Upload.csv"');
END;
DECLARE
l_success boolean:=FALSE;
l_bare_filename varchar2(100):=NULL;
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
BEGIN
-- Delete the content of the log and bad file
host('cat /dev/null > /tmp/'||v_username||'_'||'EDW_CF_IO_UPLOAD.log');
--host('cat /dev/null > /tmp/Part_Mast.bad');
-- Upload the data file to Application Server
l_bare_filename := v_username||'_'||substr(:FIC_SOURCE,instr(:FIC_SOURCE,'\',-1)+1);
l_success := webutil_file_transfer.Client_To_AS_with_progress
(clientFile => :FIC_SOURCE
,serverFile => '/tmp/'||l_bare_filename
,progressTitle => 'Upload to Application Server in progress'
,progressSubTitle => 'Please wait'
,asynchronous => false
,callbackTrigger => null
IF l_success THEN
NULL;
ELSE
null;
END IF;
EXCEPTION
WHEN OTHERS THEN
RAISE Form_Trigger_Failure;
END;
DECLARE
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
begin
host('cat /dev/null > /tmp/'||v_username||'_'||'EDW_CF_IO_UPLOAD.log');
host('cat /dev/null > /tmp/EDW_CF_IO_UPLOAD.bad');
end;
BEGIN
DECLARE
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
v_password varchar2(30) := GET_APPLICATION_PROPERTY(PASSWORD);
v_connect_string varchar2(30) := GET_APPLICATION_PROPERTY(CONNECT_STRING);
a_host varchar2(500);
BEGIN
a_host :='/tmp/'||v_username||'_'||'"CF615 IO Upload.csv"';
host('sqlldr '||v_username||'/'||v_password||'@'||v_connect_string||' '|| 'control=/home/edw_bis/ctl/GLB_CF_IO_UPLOAD.CTL'||' '|| 'DATA=a_host'||' '|| 'LOG=/tmp/'||v_username||'_'||'EDW_CF_IO_UPLOAD.log SKIP=1 errors=200000 DIRECT=FALSE');
dbms_output.put_line(a_host);
END;
DECLARE
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
begin
host('cat /dev/null > /tmp/'||v_username||'_'||'"CF615 IO Upload.csv"');
EXCEPTION
WHEN OTHERS THEN
RAISE Form_Trigger_Failure;
END;
end;
DECLARE
al_id3 ALERT;
al_button Number;
BEGIN
edw_user_dump.SANM_PRC_MERGE_CF_IO_UPLOAD(:global.v_plsql_res,:global.v_ins_rec,:global.v_upd_rec);
IF NVL(:global.v_plsql_res,0) = 0 and (:global.v_ins_rec !=0 OR :global.v_upd_rec != 0 ) then
al_id3 :=FIND_ALERT('ROWINS');
SET_ALERT_PROPERTY(al_id3,alert_message_text,' Process Completed Successfully!'||CHR(10)||' Rows Inserted : '||:global.v_ins_rec ||CHR(10)||' Rows Updated : '||:global.v_upd_rec);
al_button := SHOW_ALERT( al_id3 );
ELSIF (:global.v_plsql_res IN(-1,0) or :global.v_plsql_res > 0) and (:global.v_ins_rec =0 and :global.v_upd_rec = 0 and :global.v_del_rec =0 ) then
al_id3 :=FIND_ALERT('ROWINS');
SET_ALERT_PROPERTY(al_id3,alert_message_text,' Process Failed. Please Download the Log File '||CHR(10)||' Rows Failed : '||:global.v_plsql_res||CHR(10)||' Rows Inserted : '||:global.v_ins_rec ||CHR(10)||' Rows Updated : '||:global.v_upd_rec);
al_button := SHOW_ALERT( al_id3 );
ELSE
al_id3 :=FIND_ALERT('ROWINS');
SET_ALERT_PROPERTY(al_id3,alert_message_text,'Please Download the Log File '||CHR(10)||' Rows Failed : '||:global.v_plsql_res||CHR(10)||' Rows Inserted : '||:global.v_ins_rec ||CHR(10)||' Rows Updated : '||:global.v_upd_rec );
al_button := SHOW_ALERT( al_id3 );
END IF;
EXCEPTION WHEN OTHERS THEN
RAISE Form_Trigger_Failure;
END;
DECLARE
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
begin
host('cat /dev/null > /tmp/'||v_username||'_'||'"CF615 IO Upload.csv"');
host('rm -rf /tmp/'||v_username||'_'||'"CF615 IO Upload.csv"');
end;
Thanks in advance!
Thanks,
Madhusudhanan

Madhusudhanan,
A couple of observations. First; always list your exact Forms version (eg; 10.1.2.0.2 not 10g R2). In most cases, the solution is different depending on the Forms version. Second; why must you use Forms to kick off a SQL Loader process? This is a server-side process and should be initiated by a server side process. If you absolutely must use Forms to kick off the process, again we need your Forms version in order to offer any solutions. Based on your code sample, I can asusme you are at least using Forms 9i becuase you are using WebUtil.
Is your Database and Application Server the same physical computer? If they are not, this would explain why your HOST command isn't working because HOST runs against the Application Server not the Database server.
Third; have you considered using and External Table (if your RDBMS version supports them) for each of the files you are attempting to upload? In this instance, it would be helpful to know your RDBMS version as well. External Tables can be a little frustrating to set up the first time, but as with any new construct you use - it gets easier the more you use it.
Fourth; are you getting any errors in your log file(s)? If so, what are the errors? Please list the full error message if you have one.
Finally, with respects to your statement:
Posted: Mar 18, 2011 2:30 PM - Madhu This is very urgent and critical.>
You have to understand that forum contributers are all volunteers - this is not our full-time job. If your issue is truely urgent I suggest you open a Service Request (SR) with Oracle Support! ;-)
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Firefox does not recognize hyperlinks denoting files and pages in regarding the html written to direct to the file in the same web directory. Ie: a href=myarticle.pdf

The hyperlinks are recognized by other browsers, except Firefox. A simple fix would be for any webmaster to make sure the full hyperlink is written, but that would be inclusion just for Firefox users. Simply put, Firefox should still be able to work like a DOS batch file linking files on the same directory viewed in this manner, but fails to.

That is an MS Office document and everything on that page is a image as you can see in Tools > Page Info > Media and Firefox/Tools > Web Developer > Page Source
If you used MS software then make sure that you disable VML if you save that page because only IE can display pages with VML
You can look at KompoZer for an HTML editor that generates W3C compliant code.
* http://kompozer.net/

Captivate 5 Crashing while opening previously edited file from the same day!

I have today been working on a simple Captivate 5 file. At the time of crashing it had around 9 slides and a one question quiz as I hadnt done much work on it. Im running Captivate 5 on a Windows XP 32bit machine with 4gb RAM and a capable processor. I tried to open a seperate project alongside the one mentioned in order to take a few slides from it. When doing so Captivate crashed. I tried to re open the original document ignoring the second file and got an error message. Some details are captured below. It wouldnt let me take the full detail for some reason but the file it was reporting on is below as its the version of Captivate im running etc.
I rebooted my machine and reopened the original file no problem. Again tried to open the second file and the same occured. I then tried another reboot only this time, and ever since, it will no longer open the original file which was fine. I have the files in my dropbox and used a remote connection to check these files on my Mac at home. They opened in Captivate 5 there without problem. I managed both files so know that the files are ok. It has to be to do with the installation on my Windows machine. I have run all of the available updates and had no joy.
I should point out that Captivate still works for new projects. I can just not open existing ones.
Can anyone offer any advice on how I may fix this? Its driving me crazy as im up against it with deadlines and this hasnt helped me much today.
Any advice is greatly appreciated.
James
ERROR RECEIVED :-
AppName: adobecaptivate.exe AppVer: 5.0.3.631 ModName: cptextmodel.dll
ModVer: 5.0.3.631 Offset: 00048ee9
C:\DOCUME~1\jg-2513\LOCALS~1\Temp\de64_appcompat.txt

The first thing that I would do is to look over this FAQ Entry, and then post the details - the more the better. http://forums.adobe.com/thread/961741?tstart=0
If your Projects are behaving as the OP's were, and the media is in a similar place, be sure to list everything.
Good luck,
Hunt

How can multiple files for the same genre be consolidated

I organize my iTunes files in genre folders for easy access. ITunes creates multiple folders for some genres and allows a single (preferred) genre file for other much larger files. How can I consolidate multiple files with the same genre?

Thanks. I've done what you selected. The problem is that despite all files being identified with the same genre, iTunes groups some genres in two separate folders. Thus, I have two "Country" folders, for example. More perplexing is that iTunes groups my largest genre folder, "Jazz", in a single folder.

Open attached file in the same editor(ZCRM_DNO_MONITOR customer program)

Hi All,
I wrote a dialog program to simplify the CRM_DNO_MONITOR. I gave the facility to attach file from the PC(any doc type .txt ,doc, xls. etc) by calling the functions. I need to give a facility to open these attached file in the same edit. Please let us know way
Additionally,I can find the logical and physical document of these attached files
e. g
(Doc class       : CRM_L_ORD
Doccument   : 4CA517D70BE60F7FE1000000AC113F3F
Doc Class       CRM_P_ORD
Document        4CA517D80BE60F7FE1000000AC113F3F)
Attached files successfully by calling the following functions
       objkey = wa_tab-guid .    " (crmd_orderadm_h-guid)
       objtype = 'BUS2000116'.
      CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET
      CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER
     CALL FUNCTION 'BINARY_RELATION_CREATE_COMMIT'
     CALL FUNCTION 'CRM_KW_MIGRATE_GOS' DESTINATION 'NONE'

Hello ,
i think you can make use of Clase CL_GOS_MANAGER
check Sap program which are using this clasee.
try yourself and let me know if you have any doubts.
regards
Prabhu

Lots of little files & lots of media files on the same XSAN

Similar Messages

Maybe you are looking for