Low level events please URGENT

hello
please i have some problem with low level events.please anybody have some solution so please tell me
basically any language such as c/c++ events are captured by operating system and then focusing on the particular component such as window or textbox etc.
is there any bypass mechanism in java that we get the lovel level events from any operating system and all to do something.
please Urgently reply me so that i can try for it, i have some work to do with this stuff.
thanx in advance
[email protected]

You can already get mouse clicks, mouse motions, key presses... what other "low-level" events are you interested in?

Similar Messages

Low Levels Assistance Please

Hi Guys
I need some help with my new set up
Mac G5 version 10.3.9
Logic Pro 7
Audio Interface = motu 828
I don't understand why I am not getting decent levels through logic audio and maybe someone who knows my set up can assist as I am sure it is easy solution
When i record using a mic into logic via the Motu I get the leds lighting up nicely through the MOTU and also the software interface. But In the logic Audio trackmixer the signal is coming through very low and I have to normalize the file every time.
I am assuming that i need to set up the levels through logic? As even when I peak the trim knobs on the MOtu and get feedback I still dont get a signal through a decent volume through logic
Any ideas?
Thanks in anticipation Carlo

The level meters in logic are peak meters (0dbfs), not rms meters. I would check your interface and make sure you have it setup correctly.
Is it a MKI or MKII 828 interface? How are you connecting your mic to it? A little more info might help solve your problem.
Alan
Powerbook G4, Dual 1.25 G4 Mac OS X (10.4.2)

Determine Max Value from Lower level?

Hi,
I have requirement to determine maximum value from lower levels. Please post your ideas to resolve this requirement using BEx Query designer.
Level_A1         MAX (KF1 of lower level - B1 to B2 or C11 to C1n + C21 to C2n)
    Level_B1     MAX (KF1 of lower level - C11 to C1n)
         Level_C11     KF1
         Level_C12     KF1
         Level_C13     KF1...
         Level_C1n     KF1
    Level_B2     MAX (KF1 of lower level C21 to C2n)
         Level_C21     KF1
         Level_C22     KF1
         Level_C23     KF1...
         Level_C2n     KF1
Thank you very much
BW User

Did you try @ancestval http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?ancestval.html
Regards
Celvin
http://www.orahyplabs.com

Low level Hex disk edit & search util needed- suggestions please?

low level Hex disk edit & search util needed- suggestions please?
Maybe It's just late & I've had a bad day.... but I haven't needed a low level Hex disk edit & search utility suitable for an Intel 10.4.x Mac until now and can't seem to locate one.
There should be plenty of free/shareware options (because they're handy and not particularly hard to write ... and every tech head needs one some time)...
Any suggestions please?
[I haven't bothered with the commercial stuff - like tech tool/Norton/*insert name here* Recover/repair, Something Genius etc. etc. because they are all without exception either unnecessary (just pretty shells for the underlying UNIX/X utils) useless AND greedy $-gougers, just useless, or just money gougers so I couldn't even say whether any still have a 'feature' like the old Norton Disk editor app had - but a quick look about suggest not...]
grumble
Any specific suggestions/links, please?
TIA

they are all without exception either unnecessary (just pretty shells for the underlying UNIX/X utils) useless AND greedy $-gougers, just
useless, or just money gougers
Such a high-esteem for fellow human beings - and
programmers...
You know, there are some good decent nice people
behind those names?
You'd be amazed at how much testing goes into a product.
[SNIP]
g'day Hatter...
Yes, I know there are some good decent nice people behind those names..fellow human beings - and fellow programmers (so yes, I do know...) In previous incarnations I have 'thunk up' and developed, Marketed & supported considerably more complex Apps & systems myself - I even know some of the people you mention personally - and they are usually decent Blokes/women but normally, it isn't the programmers who make the decisions on pricing/features/support/performance/upgrade costs & cycles etc...
My only error was, I agree, the phrase 'without exception' - but (mainly) only because I haven't bought/tested & used all of them very very recently. So I offer my apologies to those to whom my remarks should not apply (long, late night/early morning frustration...)
However, I also offer a few simple pertinent examples:
One 'top name' Utility company had a 'save your Mac HD' product on the market for some time that was almost guaranteed to TRASH it irretrievably but did NOT say so - nor did they help or compensate those they harmed.
Several are selling what amount to simple, pretty, GUI shells for 'free' or OS-included command line tools - no more, no less but do NOT say so and are asking good money for the 'software'.
Many are asking ridiculous prices for "regular upgrades" so you can keep their tool current with your Mac OS - one wants US$100/year for it, another, $15 per u/g, others, US$25 or $40 per u/g; one asks 'only' $10 - and these 'upgrades' are happening 3,4,5,6 times per year and are necessary for the Marketing company to keep their product Saleable to new purchasers and new Macs (as well as for important Bug Fixes - and only co-incidentally to keep it performing with your current Mac and OS - which is what you paid them for in the first place).
I won't pay for a product 3, 6 or 9 times and I won't advise my clients to: It's not unreasonable for a person to expect a 'sensible lifetime/currency' of Product X for Computer Y - say 3 years (e.g. AppleCare). I wouldn't object to paying for an "upgrade" at that point - IF it's worth the money.
Software is Waaay too expensive in many cases and is simply inviting 'piracy' - from people who have already PAID for the product: sadly, they are killing their own Gooses.
Seriously, one product costs ca. US$100 to Buy in the first place
To keep it actually working for you costs about the same again Per Year - a 3 year 'sensible lifetime' or 'currency' cost of US$300 or $400! [That'll buy a lot of 'bare drives' to put in a handy Firewire case for automatic backups in Background, differential backups etc. and other simple practices which render this product type largely unnecessary ].
For what? A relatively simple set of utilities which would actually cost the company involved less than $5 total each - over 3 years - to make available to existing ( or 'current') owners. [Applecare 'complete' Hardware and Software warranty & support on a US$2000 iMac - which includes Tech Tools Pro Deluxe or somesuch costs about US$165 for 3 years. Total.]
Having designed, developed, Marketed, supported & maintained more complex Applications to/for a sizeable user-base (in US terms) over multiple complete Series of Product 'life-cycles' - regular Updates and all, I think I know where the pirates are.
These practices have been rampant in the MSWindows™ market for a longtime. It's a real shame to see it in the Mac world.
I have all the esteem in the world for those fellow human beings who deserve such - and programmers who are 'good decent nice people'.
I have none to spare for monopolists, 'exploitationists' or any of those who take unfair/unreasonable advantage of their fellow human beings - AND of programmers who are 'good decent nice people' (like, say, ME... .
In any event, as I said: they are "killing their Gooses": I know of at least 6 software companies which went this route a while back. All are dead or dying.
Thank you for your help - and the opportunity to apologise for 'mis-speaking'.
all the best,
orig g4 733, many others thru (the luvly) Macintels New & old Macs, Wintels, MacIntels, other systems...

Hi, I can't found on where the price different receipt from lower level come from. Please help.. Thanks a lot in advance..

CKM3
Category
Quantity
Unit
PrelimVal
Price Diff
ExRt Diff
Price
Currency
Beginning Inventory
419
KG
18,841.59
4,798.81
-0.09
56,420.79
MYR
Period Opening
419
KG
18,841.59
0.00
0
44,968.00
MYR
2000050719 Post closing material ledger
0
KG
0.00
4,798.81
-0.09
0.00
MYR
Receipts
1,225.00
KG
55,085.80
27,733.41
-0.03
67,607.49
MYR
Production
1,225.00
KG
55,085.80
27,733.41
-0.03
67,607.49
MYR
5000125874 Receipts from Lower Levels
0
KG
0.00
26,620.23
-0.03
0
MYR
1002200029 Order Settlement 1183964
0
KG
0.00
1,113.18
0
0.00
MYR
1002183596 GR for order 1183964/1
1,225.00
KG
55,085.80
0.00
0.00
44,968.00
MYR
Cumulative Inventory
1,644.00
KG
73,927.39
32,532.22
-0.12
64,756.38
MYR
Consumption
225
KG
10,117.80
4,452.40
-0.02
64,756.36
MYR
Not Allocated
0
KG
0.00
4,452.40
-0.02
0.00
MYR
Consumption
225
KG
10,117.80
0.00
0
44,968.00
MYR
1002191063 GD goods issue:delvy 601
200
KG
8,993.60
0.00
0.00
44,968.00
MYR
1002183646 GD goods issue:delvy 601
25
KG
1,124.20
0.00
0.00
44,968.00
MYR
Ending Inventory
1,419.00
KG
63,809.59
28,079.82
-0.10
64,756.38
MYR
5000125874 Multilevel Price Determination
0
KG
0.00
26,715.16
-0.10
0.00
MYR
4000046771 Single-Level Price Determinati
0
KG
0.00
1,364.66
0.00
0.00
MYR

Hi
Please, address your question to SCN PP Space http://scn.sap.com/community/erp/manufacturing-pp/content
Br, Alex

CS6 Error message: "A low-level exception occurred in: Blackmagic Design (recorder) "

Hi,
I have problem when install Adobe Pr Pro CS6 with DeckLink HD Extreme 3D
My workstation have configuration as following:
Supermicro workstation
Super Micro x8DAL-i
Intel Xeon E5645 2.40Ghz
4GB DDR3-RAM x 2
NVIDIA Quadro 2000 1GB Graphics
250GB SATA 7200 RPM
2TB 7200 RPM SATA x 2
DVDRW
Window 7 Pro 64bit
I can capture with Media Express but when I try to capture from CS6 with Decklink HD Extreme 3D, the Error message: “A low-level exception occurred in: Blackmagic Design (recorder) “
Any one can help me urgent please
Thank you,
Dragonhn

I have seen an issue with the latest Blackmagic driver and capturing with the current version of Premiere. I would use Media Express to capture and then just import the files.
Eric
ADK

A low-level exception occurred in Importer FastMPEG

I am having serious problems with a wedding project. When I started it a few weeks ago it was all going ok when all of a sudden some of the files came up pixelated and blocky. I know the next question will be "can you post a clip here?". I will try to but it means showing the Bride and Groom's faces and as I have not yet shown them any of the video files I do not think it appropriate to do so here. In the meantime I am posting this here as I need some urgent help, as the project is getting very close to being overdue now.
Technical stuff:
Files from Sony HXR-MC2000E - SD MPEG files;
Using Adobe Premiere CS6
Custom built Intel i3 3.30ghz pc
Windows 7 with Service pack installed
When i opened the project today I got an error message: "a low-level exception occurred in Importer FastMPEG". Can anyone clue me up as to what this means please. To me, it seems like it could be related as I am importing MPEGs. I have tried re-importing the original files but they still come up as pixelated.
Thanks again in advance for your help.

As well as the answering the general questions here http://forums.adobe.com/message/4200840 please provide DETAILS of your computer hardware
Especially the amount of RAM and number and distribution of hard drives and your brand/model graphics adapter and driver version
For instance... my computer
Asus P6 SE motherboard with Intel i7 930 CPU
12Gig Ram and nVidia GTX 285 to use Cusa/MPE
My 3 hard drives for video editing are configured as...
1 - 320Gig Boot for Win7 64bit Pro and ALL program installs (2)
2 - 320Gig data for Win7 paging swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folders and files
3 - 1Terabyte data for all video files... input & output files (1)
(1) for faster input/output with 4 drives
- use drive 3 for all source files
- use drive 4 for all output files
(2) only 60Gig used, for Win7 & CS5 MC & MS Office & other smaller programs
Search Microsoft to find out how to redirect your Windows paging swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
I can't help with your error (have never had that) but posting hardware details MAY help lead to a solution
Also, if you are editing HiDef footage, your i3 is VERY underpowered... you need an i7 for "smooth" HD editing... plus, of course, enough hard drives to spread the workload (minimum 2 - or 3 like I have)

Collective Planned orders Scheduling for lower level orders with reference to the Superior order

Hi All,
Collective planned order scheduling.
I have been trying to reschedule the superior planned order and i was expecting the lower level planned orders to reschedule based on the superior planned order.
My problem is
when i try to reschedule the superior planned order the system is not rescheduling the lower level planned orders.
For example if i change the basic finish date of superior planned order as 30/09/2014 and reschedule the planned order it is only scheduling the header planned order and the lower level planned order is not scheduling.
Could some one tell me why this is not happenning at planned order level.
As the rescheduling of collective order will work at production order level but for some reason it is not happening at planned order level(as there is no option available to do so).
Please give your thoughts on this asap.
Mahee.

Hello Mahee
Please observe that your system is working as designed. Planned orders are scheduled independently, even when they are part of a network/collective order. Note 152319 explains the planned order scheduling in detail and it provides the following information:
* No scheduling of overall networks is executed although a directly manufactured component is assigned.
Note that no scheduling of the overall network is executed for planned orders. For the components requirements dates are determined. In order to cover them, planned orders are created in the next MRP run. Since the requirements are not managed using the exact time, the results of the planned order scheduling and of a scheduling of the overall network of the converted collective order can differ.
BR
Caetano

High level & low level Desing in OBIEE

Hi Gurus/Experts,
I am new to in OBIEE and please let me know about the High Level and Low level design of obiee projects.
Really its helpful for me to develope my carrier skills.
Thanks in advance,
Sriram

Hi,
OBIEE 11g Basic Security Guide from Deliver BI
http://www.box.net/shared/5ef1alb2sp
http://www.rittmanmead.com/2008/04/migration-obiee-projects-between-dev-and-prod-environments/
http://obiee101.blogspot.com/2009/07/obiee-how-to-get-started.html
http://www.scribd.com/doc/60264784/OBIEE11g-Logical-Table-Souorce
tutorial from the Oracle By Example range
http://st-curriculum.oracle.com/obe/fmw/bi/bi1113/createanalysis/ps.htm
also refer the blow one for installation and migration and essential ..basics..
OBIEE10 repository and webcatlouge in obiee 11g
http://www.rittmanmead.com/2010/08/oracle-bi-ee-11g-upgrading-from-bi-ee-10g-repository-web-catalog/
new features OBIEE 11g is having
http://obieeelegant.blogspot.com/2011/10/obiee11g-features.html
There are the full new features about OBIEE 11g.
Top5 New Features in Oracle Business Intelligence Security
http://oracleintelligence.blogspot.com/2010/10/top5-new-features-in-oracle-business.html
Top5 New Features for Oracle Business Intelligence System Administrators
http://oracleintelligence.blogspot.com/2010/10/top5-new-features-for-oracle-business.html
Top10 New Features for Oracle Business Intelligence Users
http://oracleintelligence.blogspot.com/2010/10/top10-new-features-for-oracle-business.html
List of Bug Fixes Included In OBIEE 11.1.1.5.0
http://obieeelegant.blogspot.com/2011/11/list-of-bug-fixes-included-in-obiee.html
OBIEE 11g (11.1.1.5.0) Software Only Installation on Windows Server 2008/2003/XP 64 bit SP1 &SP2
http://obieeelegant.blogspot.com/2011/09/obiee-11g-111150-software-only.html
Migrating Application Roles from Dev to UAT server and Production server.
To move Application Roles, please kindly review the following information:
Oracle Fusion Middleware Application Security Guide 11g Release 1 (11.1.1)
7.3.2 Migrating Policies with the Command migrateSecurityStorehttp://download.oracle.com/docs/cd/E14571_01/core.1111/e10043/cfgauthr.htm#JISEC2929
http://www.rittmanmead.com/2010/10/obiee-11gr1-security-explained-working-with-the-default-security-configuration/
http://www.rittmanmead.com/2011/04/oracle-bi-ee-11g-migrating-security-credential-store-part-3/
The same guide can be used...But some fetures are changed in it.Here is the RPD 11g step-by-step guide
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/biadmin11g_02/biadmin11g.htm
Refer:
Re: OBIEE 11G Beginners guide
Thanks
Deva

Premiere Pro CS6 - A low level exception has occurred in ImporterMPEG

Hi Adobe Community,
I'm having a bit of an issue with the ImporterMPEG.prm plugin for Premiere Pro CS6 that's causing playback and exporting issues.
Computer Specs: Win7 PC, NVIDIA GeForce 6150SE nForce 430 graphics card
Description: After playing back video for a while, Premiere will eventually start repeatedly reporting "A low level exception has occurred in ImporterMPEG". The preview player will be completely frozen, and I'll be unable to export. The exporting will fail with a generic "Unexpected error" message.
This issue has only started a week ago. Until now, I've been able to use Premiere Pro CS6 with no issues. If possible, I'd like to avoid upgrading to CC 2014, because the CS6 version was working fine before.
So far, I've tried a few things:
• Deactivating and reactivating (which, by the way, apparently doesn't help subscription users like me, per my recent chat with Adobe support on this issue)
• Uninstall and reinstall (I didn't know about the CC Cleaner tool at the time, so I haven't tried a clean uninstall yet)
• Change the Preview File Format in Sequence Settings (from I-Frame Only MPEG which had worked since I installed the software over a year ago to Microsoft AVI)
• Crying silently to myself (this did not help, the computer is cold and cruel)
• Clearing out the media cache (which I'd never done before and let it get up to ~75GB without me noticing)
• Moving the plugin from its location in Program Files, hoping that maybe Premiere Pro would notice it was missing and to try to find a new fresh one (it didn't work)
So far, only the Preview File Format change seemed to bring relief, but the bad behavior came back after about a week.
I'm thinking maybe the ImporterMPEG.prm plugin got corrupted somehow? The one notable thing I can remember with the computer in the last few weeks was a power event that shut down my computer unexpectedly. I think I had Premiere Pro open at the time.
If it's relevant, I mostly work with .AVI, .MP4, and .TS files in my projects, all varying resolutions and FPS. I'm usually working with about 1GB of files in a project, very rarely more than 2GB.
Has anyone else had this issue? Or, even better, has anyone else resolved this issue?
Thanks!

But really, the real solution for me was to not update Premiere Pro CS6 after a reinstall. The most recent updates just do not like my computer, I guess.
Figured I should post this solution here in case anyone in the future has this problem. (relevant: xkcd: Wisdom of the Ancients)
-Sam

Need help in copying Invoice date to lower level item in Sales order report

Hello Experts,
I am debugging into one Sales order report.I need little bit help.The report is displaying Invoice Date for
Sales order Billing documents for Higher item in Bill of Material Structures.But as per user requirement,
I am supposed to show the Invoice date for lower level items also.The field for Higher level item is 'UEPOS'.
I want to copy the Invoice date for Higher level item to lower level item. Can you please guide me in the logic?
Thanking you in anticipation.
Best Regards,
Harish

Hi BreakPoint,
Thanks for the information.
I have applied the same way but it is showing only lower line items now.
Invoice dates for Higher level items are not there.
I am pasting the code here which I have applied.
Then you can give me more guidence.
This is to be done only for 'ZREP' sales orders.
if w_vbak-auart EQ 'ZREP' and w_vbak-uepos is not INITIAL.
                      read table t_final into w_final_ZREP with key vbeln = w_vbak-vbeln
                                                                    posnr = w_vbak-uepos.
                         w_final-erdat_i = w_final_ZREP-erdat_i.
                         else.
                if w_vbak-auart EQ 'ZREP' and w_vbak-uepos is INITIAL.
                  w_final-erdat_i = w_invdate.
                endif.
                endif.
Can you please sugest me changes here?
Best Regards,
Harish
Edited by: joshihaa on Jul 13, 2010 6:22 PM

How to do you control lower levels from the Stage?

How to you control lower levels from the Stage?
I have a button on the main stage and I have a symbol that has another symbol inside that I want to control that timeline or label.
I have had success with going one level deep but not two or three deep.
sym.getSymbol("symbol01").stop("label01");
Any help would be great!
Thanks.

Can you explain the hierachy of your symbols? By this I mean, name of your symbol and any symbol inside and any symbol inside nested symbol and what event you are triggering from where?

Low Level SSL read is not working !

Hi,
I can readLine() from a buffered SSL socket without any problems.
But I can't get the last line because the last line does not contain any <CR> or <LF>.
So, when I try to do a low level read from a raw SSL socketstream, I always get "zero bytes available" even though there should be bytes to read.
Please help.
InputStream in2 = serversocket.getInputStream();
while (true) {
     num = in2.available();
     if (num > 0) {
     buffer = new byte[num]; // allocates memory buffer
in2.read(buffer,0,num);
     System.out.write(buffer,0,num);
     System.out.flush();
     try {
               Thread.sleep(500);
          } catch (InterruptedException e) {
                         e.printStackTrace();
What did I do wrong?

I can readLine() from a buffered SSL socket without any problems.
But I can't get the last line because the last line does not contain any <CR> or <LF>.So send it, or don't use readLine().
So, when I try to do a low level read from a raw SSL socketstream, I always get "zero bytes available" even though there should be bytes to read.So don't use available(). It's not guaranteed to return anything other than zero, and in SSL it doesn't.
     num = in2.available();Pointless. Remove this line.
     if (num > 0) {
     buffer = new byte[num]; // allocates memory bufferAllocate a buffer with a fixed size, outside this loop.
in2.read(buffer,0,num);in2.read(buffer);
     System.out.write(buffer,0,num);Correct.
     System.out.flush();Do that outside the loop.
               Thread.sleep(500);Completely pointless and literally a waste of time.
What did I do wrong?Almost everything. Try it with the corrections suggested.

How can I get low level access to netstream using OSMF?

Hi
I'm trying to gain access to the low level netstream underneath the hood of OSMF so that I can access its netstream.info property for reading metrics.
I find that I am able to do this for MP4 videos but not for F4M dynamic streaming videos.
For MP4, I was successfully able to create a VideoElement that used a CustomNetLoader class which overrided the createNetStream method to return a netstream object.
However, for F4M, I have to use either the MediaFactory.createMediaElement(element) method or the F4MElement. The F4MElement does not allow a CustomNetLoader to be used and it seems to only accept a F4MLoader class.
Any advice on how I can access either the netstream object or the metrics of F4M videos?
Thanks

ok, I finally got access to the direct netstream object - someone from Akamai gave me the answer.
Seeing how I wasn't able to find this answer anywhere on Google, I'm going to post the solution here as there's no way I would have known this solution without someone who knew how to get direct access to the netsteam object in OSMF.
There's a hidden class that won't show up in the code hint called org.osmf.net.NetStreamLoadTrait that you have to import.
1) First, your media player playing controlling your MediaElement has to listen for a LoadEvent.LOAD_STATE_CHANGE event after you load the MediaElement into the media player
mediaPlayer.addEventListener(LoadEvent.LOAD_STATE_CHANGE, onLoadStateChange);
2) Upon LoadEvent.LOAD_STATE_CHANGE, check for a org.osmf.traits.LoadState.READY - you can only access the NetStream object when it is LoadState.READY or the netstream object will return as null.
private function onLoadStateChange(e:LoadEvent)
                              if(e.loadState == LoadState.READY)
3) Once the LoadState.READY is true, you can create a datatype of NetStreamLoadTrait and type cast it from a Load trait:
private function onLoadStateChange(e:LoadEvent)
if(e.loadState == LoadState.READY)
     var nsLoadTrait:NetStreamLoadTrait = mediaPlayer.media.getTrait(MediaTraitType.LOAD) as NetStreamLoadTrait;
4) Once you successfully type cast the Media Load Trait from your media into NetStreamLoadTrait, you can access the property netstream from the NetStreamLoadTrait object.
private function onLoadStateChange(e:LoadEvent)
if(e.loadState == LoadState.READY)
     var nsLoadTrait:NetStreamLoadTrait = mediaPlayer.media.getTrait(MediaTraitType.LOAD) as NetStreamLoadTrait;
     var ns:NetStream = nsLoadTrait.netStream;
Hope this helps someone out there.

Placing a Low Level DB Function for Time Offset

Would any one be able to point me to any documentation on the Oracle 10g R2 release that might help me understand if there is a way to modify datetime query parameters and datetime query results at a low level in the DB? R12 of Oracle Apps does not handle global implementations very well when it comes to running 24/7 with sites around the globe and handling data stored with a time element. Everything is stored using the single server time zone. So I thought perhaps there might be a way to modify the DB at a low level to perform the offset of the value for any datetime parameter to correspond to the proper server time zone to pull data and then to also offset the queried datetime values to the users, via a session value, time zone. So I am thinking long shot but perhaps there is a way to insert a function call to a function built in C and linked in to the DB somehow or the DB listener or the DB connection driver software. I don't know. I am familiar with OCI and SQLCA but don't believe these offer this type of interjection with the DB I am looking for. Of course, if there is a simple solution I am all for that.
Thanks,
Jason

Adjusting the timezone at the session level doesn't do what I need it to do. At least based upon the tests I have done. And my research into changing the session DB time zone only applies to the new timestamp data types and not to the date data type.
However, if you think that changing the DB session time zone setting would help do what I have stated please tell me.
Thanks,
Jason

Low level events please URGENT

Similar Messages

Maybe you are looking for