Low qtp performance while executing from eCATT

Hi All,
I have executed Test Package containing eCATT Test Configuration.QTP Scipts are attached in eCATT & eCATT Test Configurations in test package.While executing individual test cases they work fine.But when I executed them in batch(Test Package) the performance was bad.
I got the following error,
'Execution was cancelled in --- from --- runs'.
Also I got some other errors like,
'External test tool 'MERCURY QUICK TEST PROFESSIONAL' is busy and cannot create new test script'.
Can anybody answer what can be the reason.
Thanks,

You can also create a table with the desired records and drop this one.
CREATE TABLE PROFITS_TT2_TEMP AS
SELECT * FROM
(SELECT pt.*, row_number() over (partition by channel_id, cust_id, prod_id order by channel_id) rn
FROM profits_tt2
WHERE rn = 1;

Similar Messages

JRE performances while executing small components

Hello,
I am developing a very small component that will be executed on a very busy machine.
For this reason I am concerned about the performances while using the JRE to executing it.
The component will also be called multiple times, possibly in parallel.
My question is: how does the JRE works in this case?
Will the JRE loaded on the memory every time the component is executed, or will it be loaded before?
Thank you

The JRE will be loaded for each process that is created.
And the detail you provided doesn't provide enough informaton to indicate whether there is a server application running this or a new process is invoked each time.

Query performance while migrating from 9i to 11G

Hi,
We've one production application with version 9.2.0.6 and migrating to 11g release.
At present we're having a lot of queries in our 9i database which are using the cost based optimizer.
Just wanted to check if we move all the cost based queries from 9i to 11G, will it still work in the same way in 11G as well or do we need to have some check/tuning machanism on all those(or some) cost based queries?
Thanks
Deepak

Yes you should test as much as possible, also gather fresh stats.
Off the top of my head, the column endpoints (the low and high values recorded in the table stats) and subpartition statistics were ignored by the optimizer prior to 10.2, and it can make a big difference when it starts using them, especially if the stats are out of date as then many partitions start looking empty to the optimizer even when they are not.
Once you have set up an 11g test system, you might try capturing a SQL Tuning Set and running it through the SQL Performance Analyzer (new in 11g), perhaps comparing performance with optimizer_features_enable set to 9.2.0.6 and 11.2.0.2. SPA executes all the cursors in the set and gives you a detailed report on what improved and what regressed etc.
Workload Replay is the other component of Real Application Testing. It lets you capture the entire workload on the database and play it back on a test system. In theory this is pretty cool, although my experience with it so far has been that it is so complicated to set up (and buggy) and requires so much control of the replay environment that we haven't been able to make it work yet and frankly I'm a bit fed up with it. Don't let me put you off though.
A patch is available from Oracle to enable workload and tuning set capture in 9i for replay in 11g - see Metalink note 560977.1.

Error while executing from the Favorites Menu

Hi Experts,
I am getting error while Excuting the Favorite from SAP Menu Screen ( SAP Easy Access ) ..
After clicking , one Internet Explorer screen is appearing .. And after few seconds, I am getting the error.
The detail is as follows :
The system is trying to execute the program/display the file
http://dbcibwp:8100/sap/bw/BEx?cmd=ldoc&infocube=ZMTOWN&query=ZMTOWNS_SALE_AC_PL&sap-language=EN
ATTENTION : The object that will be executed could not be determined !Do you want to grant access to this file ?
There was a problem sending the command to the program ..
Please suggest
Thanks,
Sanjana

Hi Durgesh,
If I am running the same query through RRMX . There is no problem. In transaction RSRT, Its running fine.
Can you tell me , how to check the Query in "DBCIBWP" where it is located exactly ??
Thanks,
Sanjana

Error while Executing from BI 7.0 (Query Designer)

while exicutting query from Query designer i BI 7.0. I m getting following error message.
Please check and reply back...
The following error was encountered:
Unable to determine IP address from host name for bidev.nt_dolvi
The dnsserver returned:
Name Error: The domain name does not exist.
This means that:
The cache was not able to resolve the hostname presented in the URL.
Check if the address is correct.
amit

Hi Amit,
I guess you are trying to execute the query in the Browser.
In which case you need to talk to the basis and find out if the Ports are open and the required configuration to run in Browser is done.
Regards,
Tom.

BI Portal is not displaying Dashboard while Executing from BI Dev System

HI Friends,
I have created Dashboard based on Bex Query using SAP Netweaver Connection and published it to BI Dev System.
it was running good but past 3-4 days it is not working.
When I am executing it from BI Dev its not showing the output in BI portal.
its only show initializing part of dashboard.
please suggest ........
Regards
Sanjeev

has your bex query changed that the dashboard is sourcing its data from? if so, and you have set the connection to "refresh before components load" it will sit at this state until it times out (error handeling is not great). perhaps worth dropping a refresh button in an trying it without refresh on open - this will rule out (or in) a problem with the data connection.
Cheers,
Jeremy

Admin Task 2008 fails while executing from BIDS environment

Hello,
we developed a custom SSIS pcakge for automating master data load in BPC 7.5 MS.
The packages works fine when running form Data Managaer.
When executing the package from Business Intelligense development studio environement, only Admin Task 2008 with Create Dimension based on the SQL table option fails.
The user id has full authrozation in BPC.
Another information is that even this works fine when executing the package inside the server network.
But fails when executing this by logging to application server remotely.
Note that Run32bit property is already set to false.
Error message it gives is : The Task Create Dimension Fails
any expert thoughts are welcome.

0x80070047 = "No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept."
You must have some non-standard policy or restriction applied to the system hosting the share.
Jason | http://blog.configmgrftw.com

Poor performance while executing

hi,
the java pgm involves display of pictures and movies... but if there are other applications running then it becomes very very slow. WHy is it so? I am using Redhat 9 Linux platform and jdk1.4.5. i have to run the other applciations... y is it that its takin so much time to display each pic. Could there b some memory problem as the pic and movies take a lot of space and the garbage collector doesnt ahve enuf time to recollect the memory?

I would try settings a lower (=higher value) process priority with nice...The nice level influences only the contest for the processor. It won't help with I/O issues.
It would be worth to try to run the other applciation so that it writes into a file instead of to a console and compare the outcome.

Facing a small problem while executing WDA application from portal

Hi Experts,
I developed web dynpro for ABAP application and placed table UI control, which contains 270 records. Executing from SE80, it is working fine and showing clearly all records.
This application integrated in portal, while executing this applicaiton from portal, it is working fine and showing all records.
Here I facing a small problem i.e Pager ( footer area ) of table.
When the table is displayed there are the small box in the below of the table showing ROWS 244 of 270.
244 will be available in a small box. this 244 is not showing clearly, while executing from portal ( last digit 4 displying half part only). but 244 showing clearly while executing from SE80.
Kindly suggest how to resolve this problem.
Thanks & Regards
Sridhar

Hi Gopi Krishna,
Thanks for your time. From SE80, it is working fine and showing clearly row number. There is no property for increase width of small box, which contains current row number).
Facing problem while executing from portal.
Thanks & Regards
Sridhar

Dump while executing the report in the background!!!

Hi Experts,
I have created one report which is calling the "HRASR_TEST_PROCESS" (HR form process) thru BDC.
Its running fine while executing via SE38 (foreground) but getting dump while executing from the background with same variant.
The dump is follows,
Short Text
Exception condition "CNTL_ERROR" raised.
ERROR ANALYSIS
A RAISE statement in the program "CL_GUI_CUSTOM_CONTAINER=======CP" raised the exception condition "CNTL_ERROR". Since the exception was not intercepted by a superior program, processing was terminated.
Line        Source Code
32         WHEN 1.
   33           RAISE CNTL_SYSTEM_ERROR.
   34         WHEN 2.
   35           RAISE CNTL_ERROR.
   36         WHEN 3.
   37           class cl_gui_cfw definition load.
   38           message id 'DC' type 'W' number cl_gui_cfw=>reason_no_init
   39             raising create_error.
   40         WHEN 4.
   41           RAISE LIFETIME_ERROR.
   42         WHEN 5.
   43           RAISE LIFETIME_DYNPRO_DYNPRO_LINK.
   44         WHEN OTHERS.
   45           RAISE CNTL_ERROR.
   46       ENDCASE.
   47
   48       m_container_type = CONTAINER_TYPE_CUSTOM.
   49
   50       CALL METHOD SET_VISIBLE
   51           EXPORTING
   52               VISIBLE = '1'
   53           EXCEPTIONS
   54               CNTL_SYSTEM_ERROR = 1
   55               CNTL_ERROR = 2.
   56
   57       CASE SY-SUBRC.
   58         WHEN 0.
   59         WHEN 1.
   60           RAISE CNTL_SYSTEM_ERROR.
   61         WHEN 2.
>>>>>           RAISE CNTL_ERROR.
   63         WHEN OTHERS.
   64           RAISE CNTL_ERROR.
   65       ENDCASE.
   66
   67       m_name = container_name.
   68       call method set_window_property
   69            exporting property_id = property_name
   70                      value       = m_name
   71                      keep_cache = 'X'
   72            exceptions others = 1.
   73       if sy-subrc ne 0.
   74         clear m_name.
   75         raise cntl_error.
   76       endif.
   77
   78       CALL METHOD ME->REGISTER_CACHED_W_PROPERTY
   79         EXPORTING
   80           PROPERTY_ID             = property_height
   81         EXCEPTIONS
Kindly let me know, what is the problem and how can i solve it.
Thanks in advance.
Regards,
Harish

Hello Zhou,
indeed, as you mention the ALV grid, there are some workarounds in the system, but there is no global solution. For example, the function module REUSE_ALV_GRID_DISPLAY detects internally whether it is called in background mode, and in this case it forwards the call to REUSE_ALV_LIST_DISPLAY which is runnable in background mode, since it creates an ABAP list.
But normally, when using objects of the control framework in your program, you are restricted to dialog mode.
Kind regards,
Rüdiger

ECATT/ABAP code to close a session while executing a chain script

How to close the extra created session during the execution of chain script??
Details of the problem:
I'm using eCATT for automating different business flows in SAP,
For a particular scenario I have to create a chain script,
One chain script may contain up to 40 individual scripts,
This chain script will contain around 7 report programs using SE38 transation,
While executing SE38 script(report program), one extra session is opening (log display session),
but, my script can close the original SE38 screen only, not the extra created session,
So, after executing 5 scripts (SE38 scripts), then "sessions reached to its max" message is appearing, and the script is failing,
As it is a automation test script, no manual interaction will be there,
i.e - we should not close the extra session manually.
Now, my question is:
How to close the extra created session..??
How the recording should be done to handle this problem..??
or any extra code should be added to close the extra session..??
Is there any ABAP code.. or eCATT command available to handle this problem..??
If you have any idea to close the extra created session, please share it with me,
my effort:
I tried with "RESCON" command... this will close all the SAP sessions,
This will not work for my scenario,
and, I tried with "Close session after every RFC",
this will work, but, after executing 5 SE38 scripts, I'm facing the above problem.
Please suggest me a solution, Thanks in advance..
Regards,
Chandra shekhar.A
Message was edited by:
chandra shekhar
Message was edited by:
chandra shekhar

user13490676 wrote:
could it be a problem with jmf itself that the endofstream doesnt get generated for the datasource being read from a fileIn this instance, that would be the problem... more than likely, there's something weird about the file, perhaps it doesn't have a duration set in the header and JMF treats it like a live stream.
You could always write a custom DataSource that just passes through the input of a normal data source, and then generate the EndOfStream event yourself... maybe based on a timeout or failure counter? I haven't received any data in x seconds or after x attempts, so I'm assuming the file is done... Or when you've read enough data that the file can't possibly have any more (read >= file header + file data)...

Error while executing report from Query designer

Hi All,
When I am executing from query designer, I am getting following error.
Even I can't execute it from another portal where i created source system of BI server.
But i can execute queriew from Query analyser and t-code RSRT.
When I execute from Query desinger the url is as follows.
http://XXX:00/irj/servlet/prt/portal/prtroot/pcd!3aportalcontent!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0PA_C01_Q0201&VARIABLE_SCREEN=X&DUMMY=5_
And the error is:
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Information for Administrator
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,*
Required information for reproduction according to note 948490.*
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
java.lang.NullPointerException
java.lang.NullPointerException
at com.sap.ip.bi.webapplications.runtime.service.metadata.impl.MetadataAccess.getMetadataModel(MetadataAccess.java:139)
at com.sap.ip.bi.webapplications.runtime.impl.Page.getMetadataModel(Page.java:8953)
at com.sap.ip.bi.webapplications.runtime.impl.Page.normalizeCommands(Page.java:4963)
at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4473)
at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:3316)
Details: Full Exception Chain
System Environment
Server
BI Java Release: 7 - Patch level: 0000000100 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP unknown
Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_24-b04
Operating System SunOS - amd64 - 5.10
REgards
Mohan

Hi mohan ,
You can check these OSS notes for the issue .
1. 795699 - Customizing default error messages for HTTP
2. 807000 - Http requests are not fully read after timeout
3. 804124 - HTTP communication with XI Adapter Engine fails
Regards,
Lokesh

Null pointer exception while executing a scenario from cloned work repo

Hi,
I have involved in ODI 10g to 11g migration activity.
For doing that activity, i cloned the existing master and work repositories into some intermediate master and work schemas.
Created new configuration settings for pointing the odi 10g to the intermediate master and work repositories.
Everything is fine till this, but while executing any interface or package anything from intermediate work repo designer, am facing error as below
"Cannot start the execution, Null pointer exception"
java.lang.NullPointerException
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.prepare(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.t(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.dbobj.SnpSession.localExecute(SnpSession.java)
     at com.sunopsis.graphical.l.or.e(or.java)
     at com.sunopsis.graphical.r.z.actionPerformed(z.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Note: My previous and cloned Master's work's repository id are same
Could anyone pls help on this.
Thanks in advance..

The error is resolved by following the below solution
If you receive an error in ODI 10g like;
java.lang.Exception: Error during Session launching
at com.sunopsis.dwg.dbobj.SnpSession.remoteExecute
or
java.lang.NullPointerException
at com.sunopsis.dwg.cmd.DwgCommandBase.prepare(DwgCommandBase.java)
1.First check whether your agents are working and test connection to repositories. If everything ok, you might have changed your repository name recently.
2.When you export your work and master repository and import to another schema or database and whether you connect to your imported repository, you change your repository name in your first environment.
3.Correct order is first rename your Master Repository name, log off / log on and change your Work Repository name and check below fields in both your Master and Work Repositories in both environments.
Master Repository : SNP_REM_REP
Work Repository : SNP_LOC_REPW
REP_NAME column of MASTER_REP.SNP_REM_REP should be equal to REP_NAME column in WORK_REP.SNP_LOC_REPW.
You cannot see WORK_REP.SNP_LOC_REPW value in ODI Topology Manager and if you are changing your repository name you need to update value from database.
Change the value from DB, loggoff and logon the user and connect the designer again.
Regards

Error while executing SQL query -' Must Specify Table to select from'

Hi all,
While executing query using query generator
it shows error message
[Microsoft][SQL Native Client][SQL Server]Must specify table to select from.
2). [Microsoft][SQL Nativ
SELECT T1.ItemCode, T1.Dscription AS 'Item Description', T1.Quantity, T1.Price, T1.LineTotal,
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=-90 AND T1.LineNum=T2.LineNum) as 'BEDAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=-60 AND T1.LineNum=T2.LineNum) as 'ECSAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=7 AND T1.LineNum=T2.LineNum) as 'HECSAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=1 AND T1.LineNum=T2.LineNum) as 'VATAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=4 AND T1.LineNum=T2.LineNum) as 'CSTAmt'
FROM dbo.[OPCH] T0 INNER JOIN PCH1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN PCH4 T2 ON T2.DocEntry=T0.DocEntry
WHERE T0.DocDate >='[%0]' AND T0.DocDate <='[%1]' AND T0.DocType = 'I'
GROUP BY T1.ItemCode,T1.Dscription,T1.Quantity, T1.Price, T1.LineTotal,T0.DocEntry,T1.DocEntry,T1.LineNum,T2.LineNum
It's executing fine in MS SQL Server Studio Management.
Please give y'r ideas to solve the problem.
Jeyakanthan

try this, it works fine in my B1:
SELECT T1.ItemCode, T1.Dscription AS 'Item Description', T1.Quantity, T1.Price, T1.LineTotal,
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=-90 AND T1.LineNum=T2.LineNum) as 'BEDAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=-60 AND T1.LineNum=T2.LineNum) as 'ECSAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=7 AND T1.LineNum=T2.LineNum) as 'HECSAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=1 AND T1.LineNum=T2.LineNum) as 'VATAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=4 AND T1.LineNum=T2.LineNum) as 'CSTAmt'
FROM dbo.OPCH T0 INNER JOIN PCH1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN PCH4 T2 ON T2.DocEntry=T0.DocEntry
WHERE T0.DocDate >='[%0]' AND T0.DocDate <='[%1]' AND T0.DocType = 'I'
GROUP BY T1.ItemCode,T1.Dscription,T1.Quantity, T1.Price, T1.LineTotal,T0.DocEntry,T1.DocEntry,T1.LineNum,T2.LineNum
B1 don't like brackets!
Regards

Time out error while executing BW query from SRST

Hello Experts,
While running a query from SRST t-code im getting time out dump.
Is there any possibility to run the query in background to avoid dumps, apart from taking the report and executing from SE 38
Regards,
Arjun Reddy.

Hi,
Your target may have huge and report may be trying to extract whole data.
please try to your report with some selections/filters and check it.
it may work.
Thanks

Low qtp performance while executing from eCATT

Similar Messages

Maybe you are looking for