LR 5.3 export with resize option not resizing

Hello!
Just updated my LR to 5.3 from the CC and noticed a weird problem that I never encountered before in LR4 or 5.x (before 5.3 that is).
I usually export pictures from RAW format to either TIFF or JPG (100% quality) and depending on purpose I use batch resizing, e.g. 1080 pixels on short edge ... well that whole Resize setting gets ignored by LR 5.3! It still exports full size (full RAW size in this case) into JPG or TIFF, but it won't resize ... is it a bug or I am doing something wrong here?
EDIT:
I found out that I checked the "Don't enlarge" box in Export dialog under Resizing, that's when resizing was not working. After I unchecked it then it works fine, but still what does that have to do with anything if we are talking about downsampling images from 5184x3456 pixels to 1620x1080 ...

It's a (reported) bug. Exportant provides a fix for it.

Similar Messages

Borderless Window with an option to resize but should not use windowchrome property in wpf

Hi,
I want a complete border less window with an option to resize from all sides of window in xaml but it should not use window chrome property. Can we able to achieve this with out using window chrome property? I also used allow transparency property but it
is not working to my requirement. Help me on this
Karthik

Hi,
I hope you are using "AllowTransparency" along with "ResizeMode"
<Window
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Width="300" Height="300"
WindowStyle="None"
AllowsTransparency="True"
ResizeMode="CanResizeWithGrip">
</Window>
Now "AllowTransparency" can lead to Memory leak so you may refer to below style property
<Style TargetType="Window" x:Key="DialogWindow">
<Setter Property="AllowsTransparency" Value="True"/>
<Setter Property="WindowStyle" Value="None"/>
<Setter Property="ResizeMode" Value="CanResizeWithGrip"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type Window}">
<Border BorderBrush="Black" BorderThickness="3" CornerRadius="10" Height="{TemplateBinding Height}"
Width="{TemplateBinding Width}" Background="Gray">
<DockPanel>
<Grid DockPanel.Dock="Top">
<Grid.ColumnDefinitions>
<ColumnDefinition></ColumnDefinition>
<ColumnDefinition Width="50"/>
</Grid.ColumnDefinitions>
<Label Height="35" Grid.ColumnSpan="2"
x:Name="PART_WindowHeader"
HorizontalAlignment="Stretch"
VerticalAlignment="Stretch"/>
<Button Width="15" Height="15" Content="x" Grid.Column="1" x:Name="PART_CloseButton"/>
</Grid>
<Border HorizontalAlignment="Stretch" VerticalAlignment="Stretch"
Background="LightBlue" CornerRadius="0,0,10,10"
Grid.ColumnSpan="2"
Grid.RowSpan="2">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition/>
<ColumnDefinition Width="20"/>
</Grid.ColumnDefinitions>
<Grid.RowDefinitions>
<RowDefinition Height="*"/>
<RowDefinition Height="20"></RowDefinition>
</Grid.RowDefinitions>
<ResizeGrip Width="10" Height="10" Grid.Column="1" VerticalAlignment="Bottom" Grid.Row="1"/>
</Grid>
</Border>
</DockPanel>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
The above code reference is from this
link.
I hope this helps to resolve your issue.
Thanks & Regards,
Anubhav Bajpai

Help with export with query option

I need help with an export with query option.
I have a script that includes the following
auddate=`date '+20%y%m%d'`
file="cal_shrlgpa"$auddate".dmp"
exp / file=$file tables=shrlgpa query\=" where shrlgpa_pidm in (Select sztahbr_pidm from purdue.sztahbr where sztahbr_to_extract\=\'Y\' and sztahbr_export_status\=\'N\')\"
echo 'cal export file created:'$file
when I run the script, I get the following error:
cal_export_tables.sh[7]: 0403-057 Syntax error at line 7 : `"' is not matched.
Can somone help me with the query option?

I made the suggested change:
exp / file=$file tables=shrlgpa query=" where shrlgpa_pidm in (Select sztahbr_pidm from purdue.sztahbr where sztahbr_to_extract=\'Y\' and sztahbr_export_status=\'N\')"
and got the following error:
LRM-00116: syntax error at 'sztahbr_to_extra' following 'where'
EXP-00019: failed to process parameters, type 'EXP HELP=Y' for help
Shannon

Advance with dialog option not working

Hi All ,
   I'm getting an error whenever I'm executing a particular branch of the workflow .
The workflow has one User decision box , in which if user selects "Reject Option" , another work items needs to be executed which will dispaly a popup window . For this I have used "Advance with Dialog" option .
   These things were working fine in the Dev. server but when we transported it to Quality server , it started giving an error which was "There is no chief position for <pos. no.>" .
   But when I debugged the same WF through transaction SWUS , i didnt come accross such value . I'm not able to figure it out what is the exact problem ?
   Any inputs ?
Thanks ,
Sonu M.

Hello Sonu,
Please do an auth check immediately after the decision (SU53). The first agent determination is done by either the system or the previous user. However with advance with dialog, the next agent evaluation is done by the user who performed the decision. It is quite usual for QA system's userID's to have different auths to dev.
Another alternative is not to use the rule for the rejection step, thats to use a container element PreviousAgent to pass the actual agent of your decision to step into the following step.
Hope that helps.
Cheers,
Mike

I have a problem with a table not resizing correctly in some browsers

Hi,
I am using the fluid grid layout in DW. I have created a table to hold some images and text. I have the table set to 100% instead of a fixed width.
The table and images resize correctly at my smartphone breakpoint in DW and Crome. They do not resize correctly in IE10 or Firefox.
I hope somebody can point out the error of my ways.
Thanks
http://cupcakemary.skeeterz71.com/_cm_mockup/menu.html

Tables do not work well in Fluid Grid Layouts because table width is always going to be determined by combined width of the content inside it. As such it won't re-scale past a certain point no matter what you do. I typically avoid using tables for layouts anyway. But especially in FluidGrids.
If you build your FluidGrid layout correctly from the start, there's little reason to use tables.
LayoutDiv 1 LayoutDiv 2 LayoutDiv 3
float:left float:left float:left
On smaller displays, these divs will naturally stack vertically.
LayoutDiv1
LayoutDiv2
LayoutDiv 3
Nancy O.

Resizing does not resize graphics?

Hi,
I'm playing with a layout that is created using floats and em
for size. The
audience will be older seniors, so I would like the page to
resize both
larger and smaller.
The page has graphics that are screwing up the resizing to a
smaller size so
that some of the floats are dropping. Is there any way of
controlling what
happens with the graphics to stop the float drops, or am I
doing something
else wrong?
IE6 - when going smaller, the float drop problem occurs.
FF2 - works ok, but graphics stay same size, so
proportionally not right.
Opera9 - works the way I want, graphics resize too, so all is
proportional.
http://jmt.jobmark.com/jmo/workforce50/template2.htm
The css is in the template.
Thanks,
Doug

Thanks Murray,
As soon as I wrote the min-width and sent it, I realized IE
doesn't support
it. I thought it was the other way around and it was
supported by IE6 until
I looked it up. I ended up not floating the middle section,
not setting a
width for it and just setting left and right margins using
em's. That seems
to have worked.
Doug
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> Since IE6 doesn't support min-width, probably not. Just
try making that
> section about 3px narrower to see if that helps.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Doug" <[email protected]> wrote in message
> news:[email protected]...
>> Murry,
>>
>> I just used "float drop" for lack of a better term.
Since this only seems
>> to happen in IE6 (not sure about IE7), would the
min-width for the middle
>> section be a solution?
>>
>> Doug
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>>> or am I doing something else wrong?
>>>
>>> What causes the floats to drop is when the
containing box resizes to
>>> something too narrow to place the floated
element beside the rest of the
>>> content.
>>>
>>> When you resize the browser viewport, graphics
do not resize.
>>>
>>> I do not see float drop in IE6, by the way.
>>>
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>> ==================
>>>
>>>
>>> "Doug" <[email protected]> wrote in
message
>>> news:[email protected]...
>>>> Hi,
>>>>
>>>> I'm playing with a layout that is created
using floats and em for size.
>>>> The audience will be older seniors, so I
would like the page to resize
>>>> both larger and smaller.
>>>>
>>>> The page has graphics that are screwing up
the resizing to a smaller
>>>> size so that some of the floats are
dropping. Is there any way of
>>>> controlling what happens with the graphics
to stop the float drops, or
>>>> am I doing something else wrong?
>>>>
>>>> IE6 - when going smaller, the float drop
problem occurs.
>>>> FF2 - works ok, but graphics stay same size,
so proportionally not
>>>> right.
>>>> Opera9 - works the way I want, graphics
resize too, so all is
>>>> proportional.
>>>>
>>>>
http://jmt.jobmark.com/jmo/workforce50/template2.htm
>>>>
>>>> The css is in the template.
>>>> --
>>>> Thanks,
>>>>
>>>> Doug
>>>>
>>>
>>>
>>
>>
>
>

Export with save option

Hi,
Iam using IR 11 version. I have written script for exporting chart and pivot data.I used command button to export.Whenever i clik on the command button its exporting successfully but i want to save the files in different locations.for example.. if i clik on the command button it should ask for where to save the file.
script which i have written for export files..in this where i need to keep the save option???
try{
ActiveDocument.Sections["C_TTT"].Export("C:\\TTT.jpeg",bqExportFormatJPEG)
ActiveDocument.Sections["P_TTT"].Export("C:\\TTT.csv",bqExportFormatCSV)
Alert("exported successfully")
}catch(e)
Alert("Failed To Export")
}

When you click on a method in the Script Editor it tells you the required and optional parameters in the lower left corner of the editor.
And if you click Help after clicking on the Method you get the following:
Export (Method)
Applies To:
ChartSection object, (CubeQuery) QuerySection object, DataModelSection object, Document object, DashboardSection object, OLAPQuerySection object, PivotSection object, QuerySection object, ResultsSection object, Section object, TableSection object, ReportSection object
Description:
Creates a file with the information from a section object. Files can be created using the standard data formats from the BqExportFileFormat constant group.
Note:
For UNIX users of the Export and ExportToStream methods,Interactive Reporting Web Client and Interactive Reporting Web Client reference the umask command of the user running the Interactive Reporting Service to determine the three-digit octal code. This code defines the read-write-execute permissions to be turned off. Typically, umask is used in .login or .profile and in the Bourne and C shells. It is a built-in command.
Syntax:
Expression.Export(Filename As String, [optional] FileFormat As BqExportFileFormat, [optional]IncludeHeaders As Boolean], [optional] Boolean Prompt), [optional] BqEncoding Encoding)wayne

Export with Metadata does not write EXIF Lens & GPS info

I use the Olympus E-3.
I've worked an entire project with Aperture 2 (now at 2.1.2), only to find out eventually that when exporting, aperture does not write the Lens info, and GPS section of the EXIF. This is bread and butter for me.
Did a search in the forum, and there was 1 other who encounter the same problem..
http://www.trick77.com/2009/02/01/aperture-doesnt-export-all-exif-header-info/
the workaround was to copy EXIF from the original file, using Exiftool with GUI on windowsXP. The result being that Adobe bridge and LR can read, while aperture cannot read.

I also encounterd this annoying problem... I just posted another message about this...

EXPORT... option not available?

I have Soundtrack Pro 2.0.2 latest version.
I loaded up an AIF file in it and now want to export it as MP3.
On clicking the File menu, the Export option at the bottom of the menu is there but I can't click on it. Its 'greyed' out.
Why?
:s

Sounds like you have your clip loaded up in the Audio File (WAV Editor) workspace. You can do a "Save As" to a few file formats including WAV or AIFF, but not MP3.
To export an MP3 you need to be working in the Multitrack workspace.
-paul.

Exports with Embeded TC not working anymore-v7.1

Am I missing a settting?
Recent upgrade to AME v7.1 and no longer get embeded TC with QT exports from PPro via AME (queue). ProRes 422 proxy...Match Seq Settings. Has been working before upgrade.
I can get embedded TC thru direct export out of PPro v7.1...so something has changed? Or could be an AME preference? I had to trash preferences today...but exports from last week did not have embedded TC either.
Any ideas?
thanks!

There is a known issue we are investigating. However, you can do one of the following in the mean time:
1. After importing the file in to AME: open the Export Settings dialog, close it, then export your sequence. The resulting file will have the correct timecode.
2. Go to Preference > General and turn off "Enable native Premiere Pro sequence import."

Accept with hide option not focusing correctly

Hi,
I have a script where I prompt for username and password.
The script contain code similar to the following.
accept username prompt 'Enter your username'
accept passwd prompt 'Enter your password' hide
When I run the script I get the prompt to enter the username and the cursor is placed in the box. The focus is correct and I can quickly enter the username.
For the password, I get the prompt however the focus seems to be on the "OK" button - I generally need to click in the text box to get focus or I can tab to the text box. Both option are a little annoying.
Is this a bug? or a feature :(
I tested this with 3.0 and 3.1 (final) and both version behave the same.
Thank you

I'm sorry but I don't quite understand ???
Are you saying that this is the expected behavior?

Purchased songs on iPhone with ringtone options, not showing up as so

I purchased some songs on iphone last night. This morning while looking at the same songs in the iTunes store these SAME songs from the SAME album show that there is an option to make them into ringtones. But when I synced the songs purchased on my phone to my itunes on my mac, the ringtone options are not showing up. I have the column checked to show ringtone availability on my itunes but the bell icon is not showing up in the column like it is in the iTunes store for these songs. Please Help.

Right click on the song in your library and choose create ringtone. It will bring you to iTunes to make one. If it is not allowed, then not much I can say from there. I find the icons in ones own library are never accurate. Sort of like it scanned once, but won't again.
Message was edited by: DaVBMan

Export with query option

Hi all!
I need export different tables from my 10.2.0.4 database using expdp. Some of this tables, needs be under different conditions. How can I prepare my parameter file for this export?
Table1 --> query: where valid=1
Table2 --> query: where valid=1 and secure=0
Table3 --> query: where valid=1 and secure=1
Thanks a lot!!!

I'm a bit confused about parameter file ...
*1. ways to export*
There are 3 ways to export, you can use parameter file but there is no need for it (personally I never use it)
a. using expdp
b. using PL/SQL
c. external table
*2. what to export*
you simply use QUERY clause to specify where conditions, for example if you want to use (a) then it would look like this
$ expdp query=employees:"where salary>10000" tables=employeesif if you want to use parameter file
TABLES:emp_salary
DUMPFILE=dump_dir
QUERY= emp_salary:"WHERE emp_id IN (SELECT id from emp
where join_date> to_date('2004-01-01','YYYY-MM-DD')
AND dept='SALSE')"here are some useful links
Part I http://www.orafaq.com/node/65
Part II http://www.orafaq.com/node/67
Part III http://www.orafaq.com/node/74
http://www.rampant-books.com/art_nanda_datapump.htm

Is the rendering essential before export with AME?

Hello guys!
My sequence has red and yellow lines. This means I have to render it for preview. I don't want to render it because I 'm sure for the preview result (I did the same with other projects)
It needs to be rendered before the export with AME or not?
I'm not sure, but once I forgot to render warp stabilization effect and the blue line appeared on my footage...

Hi Yiotal,
You should not have to render before exporting a project either through the integrated or stand-alone version of AME. If you got a blue line in your footage, it must have been a bug in PP/AME. I've had errors exporting projects when using linked AE projects, so outputting bugs do exist.
Rendering is meant for smooth playback while editing (especially clips with a red bar. Any decent system will do fine with the yellow bars). Even if you do render everything before exporting, never use those render files in your output (i.e. make sure the 'Use Previews' box is UNchecked). I've done some tests and the image quality you get when using render files is inferior.
Hope this helps!

Export Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export Quicktime movie?

Export>Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export>Quicktime movie?

When you converted the original files via MPEG Streamclip, what did you convert them to?
Have you tried trashing your preferences in FCP? Trashing FCP prefs is usually the first step when FCP is performing strangely.
Download Preference Manager from Digital Rebellion (free) at:
http://www.digitalrebellion.com/prefman/
It will allow you to archive your current preferences if you wish to restore them later.
MtD

LR 5.3 export with resize option not resizing

Similar Messages

Maybe you are looking for