LR3 wont print to Epson 3800 on Mac OSX 10.5.8

I have never been able to print through the print module ever since upgrading to LR3. I have an Epson 3800 on a MacPro running 10.5.8.
I have absolutely no problems printing through Photoshop CS5. Beautiful results! NOTHING from Lightroom: Very frustrated! Any help, suggestions
greatly appreciated!  - Craig

What happens when you try to print, any error messages?
Have you tried printing in Draft Mode (check the box in the Print Job panel)?
What settings are you using to print with?
Both my Macs print to my 3800 perfectly, I am on 10.6.5 though - have you considered upgrading?

Similar Messages

  • Firefox does not create a pdf properly using "print Save as pdf" in Mac OSX. Why?

    When I "Print > Save As Pdf" in Mac OSX, Firefox will always clip the right margin of the page, leaving out alot of information from the document. Safari creates the same page effortlessly, but I generally prefer Firefox.
    == This happened ==
    Every time Firefox opened
    == ? After updating to Firefox 3.5.8 - maybe?

    I am able to command-print-save as PDF and get the whole page but Firefox crashes every time.

  • I can't print CS5 files from my Mac OSX (Mavericks). Can print from other applications. Help please?

    I can't print CS5 files from my Mac OSX (Mavericks). CS5 crashes when sent to print.  Can print from other applications (Word, etc.).

    I just tried installing them. I got the message that "Some updates failed to install" (including for CS5), to quit and try again. I was curious and tried again to print and lo and behold, I could print!  I'm still nervous that not everything installed and wonder how to get a complete install.

  • CS2 vs CS3 printing to Epson 3800

    In trying to diagnose a Photoshop/11880 printing problem, I made some test prints to an Epson 3800 from the same test file. Andrew Rodney's "printer test" image includes very smooth color gradations R > M > B > C > G > Y > R. This image was printed from PS CS2, PS CS3 and Lightroom to the Epson 3800 on Epson Premium Semigloss Photo paper using Epson's Pro38PSPP profile. The CS2 and Lightroom prints were identical. The transitions in the color gradations were very smooth. The CS3 print was very close in overall color balance, but the transitions in the gradations were not as smooth, or gradual, especially between magenta and blue, and between green and yellow. Shouldn't prints of the same file from CS2 and CS3, using the same profile, look identical? The on-screen soft proofs in CS2 and CS3 look identical, but the prints do not.
    4 x 2.5 GHz PowerPC G5.
    4.5 GB RAM.
    OS X 10.4.11.
    Photoshop CS2 9.0.2
    Photoshop CS3 10.0.1.
    Lightroom 1.2
    Epson 3800, Driver Version 3.57
    Direct USB connection.
    Epson profiles are located in driver package (as installed).
    Epson Semigloss Photo Paper 250.
    Photoshop Manages Color, Epson Pro38PSPP profile.

    Yes, all settings were the same. I got official word from Epson today there are problems with CS3. Epson, Apple and Adobe tech people are meeting in a few weeks to find a solution. In the meantime, all printing from my Macs to the 3800 and 11880 will be from CS2 and Lightroom. Thanks for your input.

  • Panoramic print problem epson 3800

    I set up a custom page of 40 x 13 inch, put the cell size in for the picture size i require and set everything else.  print preview shows the print as i want it, but when it prints it only does a small portion of the print the wrong way round.  Is there something in lightroom i'm missing or is it to do with the printer (epson 3800) setting.  paper is fed via sheet feeder, which i had done successfully on 2400 previously.    

    I rencently have a problem using custom paper size with an Epson 3800 and Lightroom. It may not be the same problem. I was not able to determine or understand if it was an LR or an Epson driver (Mac OS 10.5.6) error.
    I use Moab Chinle "square" album (12"x13"). When I was printing this paper size, I got almost always half-printed page. I have tried many things but the last setting I modified solved my problem.
    By setting the longest side to the height of the paper in the custom page definition, I do not have half-printed page anymore.
    Hope this will help.

  • Adobe Reader 10.1.3 Will Not Print on Epson 3800

    I know it says printing problems solved, but today I wanted to print some tax forms and the dialog got as far as showing the file loading into the printer after accepting the Preview. Then it stopped. So at least for the Epson 3800 on Win 7, it won't work. However, it did print on an Epson Workforce printer on XP SP3. Both computers have the latest update.
    One difference: with the 3800, I get asked if I want to save it and I have to say yes. The save is another file this time the extension is .prn which nobody can read. Or print.
    I have the latest driver on the 3800, and it works in CS6 fine and also Open Office.

    Followup:
    I checked out another form  and got the following notification:
    After clicking OK, I also cannot print. In fact, I can find no Acrobat file that will print. It sure looks like it's the printing capabilities that are no longer enabled!

  • Problem printing with Epson 3800 and Photoshop CS5

    I came across a problem trying to print with my Epson 3800 in Photoshop CS5.  I recently upgraded to Photoshop CS 5 (and Lightroom 3).  I tried to print using my Epson 3800 with CS5 but could not adjust Print Settings, Color Mamagement, Paper Configuration, Expand Border because those options are unavailable and there is a line crossing through them. I get a message that says "The bundle 'Print Setting' could not be loaded because it does not contain a version for the current architecture".   It then says to contact the creator listed here for the latest version: PrintSetting version 3.57, Copyright SEIKO EPSON CRP 2001-2006.   I can print through Photoshop CS4 as usual, but CS5 is a problem.  I haven't tried printing though Lightroom 3 yet, and have not typically used Lightroom to print, but I wonder if that will be a problem too?
    Any help will be appreciated.

    If you run CS5 or LR as a 32bit application you will have all these option available to you. You can then save these options as presets that can then be applied when you are running the applications in 64bit mode even if you can not access them individually.
    Also you might want to check Epson's download site especially the European site to see if there are newer drivers or updates for your printer. The newest drivers for other printers like the 7600/9600 support application running in 64bit mode.
    Doyle

  • Printing with Epson 3800 via Airport Express

    I'm trying to get my Epson 3800 printer working over a Airport Express connection (3800 -> USB on Airport Express). The printer is showing up fine, however when I get to the print dialog I don't have all the advanced controls as I do when printing directly connected to the computer (printer settings and advanced media control).
    What do I need to do to get those working?
    OSX 10.6.3 with the current 3800 driver (6.11) and firmware (o02179_q).

    Hello Jeff,
    There could be one of two things causing this.
    1. The print dialog is not expanded. When you select to print, if you only see the Printer name and the Presets menu, then you need to click the triangle next to the printer name. This will expand the print dialog view and show you all the menu options.
    2. If the print dialog is expanded but the menu options are different, then you may have created the print queue for the Airport connection using the Gutenprint driver. If you open Print & Fax and select the 3800 queue for the Airport connection, in the right hand pane you can see what driver is being used in the Kind section. If this shows Epson 3800 - Gutenprint v5.x.x, then you have created this print queue using the Gutenprint driver rather than the Epson driver. The Gutenprint driver usually provides most of the functions you would require, they are generally just located under different menus. So you can choose to keep using the Gutenprint driver or delete this queue and create it again, ensuring you select the correct Epson driver.
    Pahu

  • Illustrator CS6 wont open, stops at loading fonts - MAC OSX

    I have a MAC OSX 10.8.5. My Illustrator CS6 wont open anymore. It keeps stalling while loading the fonts. I have uninstalled and re-installed the program twice and also tried deleting the font that it stalled at but then it would just stall when trying to load the next font. I did notice that it seemed to be stalling on fonts that AREN'T OTF format.  I also wasn't sure to delete the fonts out of the SYSTEM, LIBRARY, FONTS folder or the other fonts folder location in LIBRARY.  I really need to get this program working, please help!!!!!

    thank you, already did that

  • InDesign 3.0.1 "CS" won't print to Epson 2200 under Mac OS X 10.5.7

    Since upgrading to Mac OS X 10.5.7 my old inDesign, version 3.0.1 in the original CS release, refuses to print. In the Print dialog box, Print Settings area, the Media Type and Ink options are grayed out. A message in the same Print Settings area tells me the ink cartridge combination has been changed and I should delete the printer from the Printer List in the (now defunct) Printer Setup Utility and add the printer again. Have deleted and re-added through the current Print & Fax panel, to no avail. This problem happens only with inDesign. Help!!

    Problem solved! I should have checked this first .. downloaded a newer driver from Epson.

  • IPhoto v8.1.1 wont print to Epson SX515W - Blank Error Message

    Before the most recent update, it used to completely crash iPhoto when printing to the Epson printer but now it doesnt crash but I get a blank error message and the print just seems to be a screen capture rather than what I was trying to print.
    Anybody else seeing this?

    Before the most recent update, it used to completely crash iPhoto when printing to the Epson printer but now it doesnt crash but I get a blank error message and the print just seems to be a screen capture rather than what I was trying to print.
    Anybody else seeing this?

  • Child Scan Lock Option / Printer that is compatible with Mac OSX 10.4.11

    Hi Everyone,
    I'm new here and I tried to look for the answer of my questions.
    1. I'm looking for a printer that has a child scanner lock option. (DeskJet, Photosmart doesn't matter)
    2. Any printer that is compatibe with my Mac OS 10.4.11
    I tried to look for the answer of these questions, however, I cannot find it here. If anyone has the answer can you please send the link to me.
    Hope I can get a response from anyone who are printer experts. Thank you.

    Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/6.0/system-requirements/
    For an unofficial Firefox 6 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    * http://www.macupdate.com/app/mac/37761/tenfourfox
    Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

  • Epson Scan and Mac OSX 10.5.4  - Application just quits

    I have a Epson 4180 Scanner and have access to 3 Macs. Two of the macs are running 10.5.4, and the other is running 10.4.11. When I launch "Epson Scan" on either of the Leopard computers, the application bounces on the dock and then just quits. It runs fine on the Mac running Tiger. I have uninstalled/reinstalled the application, repaired disk permissions, repaired pre-binding, and thrown away preferences to no avail. I spent over 2 hours on tech support with Epson, and they say it is an Apple OS issue.
    Are there any other programs I can use ? (Image Capture sees the scanner, but does not preview the image nor allow changes in resolution settings).
    Any help would be great!

    There are many posts here about scanners and fixes and workarounds. You can search for them.
    Here is a starter:
    http://discussions.apple.com/thread.jspa?messageID=7700070&#7700070
    In general it's an Epson issue in not supporting Leopard. Be sure you have the very latest Epson software and sometimes it's necessary to uninstall and reinstall it.

  • Printer Driver for c4680 using Mac OSX 8.5

    I have a Mac Book Pro with OSX 8.5 and have an old HP Photosmart c4680 printer that I want to use.  I have tried to download the driver for this printer and get an error message that says "Can't install the software for the HP Photosmart C4600 series because it is not currently available from the Software Update server."  Does this mean that there is no driver for this OS X 8.5?  Thanks

    Hi Charliered,
    Welcome to the HP Forums!
    I understand that you are having trouble installing your HP Photosmart c4680 printer on Mac OS X 8.5, and I am happy to help you with this issue!
    I am assuming you are meaning Mac OS X 10.8.5. If that is the case, please see this installation guide. OS X v10.8 Mountain Lion: Installing and Using the Printer on a Mac with Mountain Lion.
    If you do not know the Operating System you are using, please visit this website. Whatsmyos.
    Hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Cancel duplex printing on HP 6700 using Mac OSx Yosemite

    I've been searching the HP Forum site for weeks for a solution to turning OFF the duplex printing on the HP 6700 printer.  The "tab" listed does NOT appear...so it's impossible to click on it.  There are NO options or two sided printing on the HP 6700 print screen.  None of the solutions here work...at least for us.  It appears lots of others are having this same problem with the HP 6700 printer...no way to turn off duplexing.  Does anyone have THE solution that works?  Again, using a Mac Pro with the OSX Yosemite.  (We couldn't get the duplex printing to stop with the last OS either.)  Help would be much appreciated.

    Hi,
    Follow the steps below to disable duplex printing:
    Open the file used to print, click the File menu, select Print. The Print window appears.
    NOTE: The Print window might be minimized. Click on Show Details to see all available settings.
    Click the lowest selection box listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.
    Select Layout from the drop-down menu.
    Set the Two-Sided option as Off.
    You may save the settings for future use by clicking Presets > Save Current Settings as Preset... Any used preset will remain default till another preset will be used.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for