LSMW Cost Center creation using BAPI BUS0012
Hi
I am creating a LSMW using BAPI BUS0012, I have done the setting for inbound Idoc Processing, but when i am clicking on maintain structure relations, i am getting an error No Target structure could be
found
please let me know what to do ?
thanks in advance
Lokesh
Hi
YOu can check http://help.sap.com/saphelp_nw04/helpdata/en/ad/2d54a41d7011d2b42e006094b944c8/frameset.htm
Here you may get a answer to your question.
Cheers,
Hakim
Similar Messages
-
LSMW - Cost Center Upload using BAPI
I have to upload Cost Centers in SAP. I want to use BAPI BUS0012-CostCenter.CreateMultiple for the purpose, but neither does this have a message type attached to it nor it is registered in the Data Transfer Program Library (Tcode-BDLR). The ALE interface is also missing for this.
Can someone guid me for
1. Registering the program in Data Transfer Library (Tcode-BDLR),
2. Creating a message type for the same,
3. Generating ALE interface (Tcode-BDBG).
Your award is assured for all the replies you post.
Thanks in advance.
Regards,
Gajendra BhattHi!
Sounds like you pretty good know what to do already. Then you should have found the application help, too - but I'm not sure, so here are the links:
BDLR: http://service1.sap.getro.net//ecc_5.0_sr1/helpdata//EN/7b/3519b3fed111d2a6250060087832f8/frameset.htm
Messages can be defined with WE81 (I hope, that's the right kind of message)
BDBG: http://service1.sap.getro.net//ecc_5.0_sr1/helpdata//EN/78/21740f51ce11d189570000e829fbbd/frameset.htm
The ALE Programming Guide http://service1.sap.getro.net//ecc_5.0_sr1/helpdata//EN/78/2173cf51ce11d189570000e829fbbd/frameset.htm says quite a lot to the necessary steps - this should be quite usefull on your way to your own data migration.
Regards,
Christian -
LSMW Sales Order creation using Bapi method
Hi folks ,
iam doing Lsmw bapimethod ,sales order creation .In the step start idoc processing iam getting error "Has Not been Accepted for Processing ",why iam not getting plz let me know points will be awarded for all answers .Hi,
You need to set the IDOC settings in the initial LSMW screen. It will be there in menu path.
Award points if helpful
Regards,
RamaKrishna C -
Hi Gurus,
Any idea on what BAPI should we use on uploading Cost Center using LSMW? Currently we are using a BAPI with the following characteristics:
Business Object BUS0012 Cost Center
Method CREATEMULTIPLE
Message Type COSTCENTER_CREATEMULTIPLE
Basic Type COSTCENTER_CREATEMULTIPLE
Unfortunately on step 4 - Maintain Structure Relations, we are encountering an error "No target structures could be found" upon executing it. It seems that the selected bapi has no export parameter/structure.
Any suggestions for the approach should we use?
Thanks and Regards,
JayHi,
Check the below links.
LSMW Cost Center creation using BAPI BUS0012
http://wiki.sdn.sap.com/wiki/display/ABAP/ListofBAPI%27s
Hope this helps.
Regards,
Satish Kanteti -
Cost Center Creation - Manual/LSMW
Hi Experts .....
We are trying to create the cost center data using the tcode PP02, in infotype 1001, subtype A 011. when the record is manually created, relevant cost centers are displayed in infotype 0001 (Organizational Assignment). But the same transaction, when run by an LSMW, infotype 0001 is not updated. However, in PO13, cost center relationship is created in both the cases.
It would be great if some one can suggest the solution for uploading the cost centers for bulk data.Hi Kumar,
Definitly it should work.
Suppose if you are changing the CC for a position first it should delimit the dates and then is should add new CC to that posiiton.
check the LSMW agian whether it is correct or not.
OR, try to create the CC through PPOS_OLD and slece the position GOTO Account assignment.
then Select the position GOTO master CC and give the CC which you want to use with dates. which intun updates the PP02 -- Position, CC relationship also. if you want you can check.
let me know if you have probelm again.
Reward me if helps,
thanks,
Vasu. -
Reena Prabhakar - Sales order creation Using BAPI
Hi Reena,
This is Dinesh,i also face problem in Sales order creation using BAPI if you can send me the code it would be great help to me.
Regards,
DineshAnyhow, here is the code that I am using currently which works perfectly well. Not sure if it will be of any help to you, since the values to the BAPI come from the Webdynpro application. I have values stored in my "Test data directory" which I use for testing from the backend.
FUNCTION ztest.
Call the BAPI to create Sales Order
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
order_header_in = l_order_header
IMPORTING
salesdocument = l_salesdocument
TABLES
return = it_return
order_items_in = it_order_items
order_partners = it_order_partners
order_schedules_in = it_order_schdl
order_conditions_in = it_order_conditions
order_text = it_order_text.
READ TABLE it_return WITH KEY type = 'E'.
IF sy-subrc = 0.
*-- error occured
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
ELSE.
*-- no error
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
ENDFUNCTION. -
Need sales order creation using bapi in oops
need code for sales order creation using bapi in oops
hi rocky,
could you pls give a bit explanation on what you are expecting.
regards,
Pavan -
Mass sales order creation using BAPI
Dear All,
Can anyone help in mass sales order creation using Bapi BAPI_SALESORDER_CREATEFROMDAT2.
For example if i want to create 3 sales order with three item per order . i am populating
HEADER = 3 Records
Item = 9 records
schedule = 9 records
partner = 1 record.
Then after populating the records I am calling Bapi BAPI_SALESORDER_CREATEFROMDAT2
to create order. It should have created three order but unfortunately it creates
only one sales order. I debugged and found that records are correct both in header,
item, scheudle and partners.
Could you please guide me what I am missing for creation of mass orders.
I appreciate your time and many thanks in advance.
cheers
chandraHi Chandra,
Do like this.
Loop at Header table into wa_header.
*-- Move BAPI Header data
Loop at item table into wa_item where condition.
*-- in this move all Item and Schedule line item to the BAPI.
At end of item .
Use the below function modules.
BAPI_SALESORDER_CREATEFROMDAT2
BAPI_TRANSACTION_COMMIT.
Endloop.
Endloop.
Regards,
Balavardhan.K -
Material Master Creation Using BAPI
Hi,
I m using BAPI_MATERIAL_SAVEDATA for Material creation using BAPI.
Now the problem is , i have created a Screen exit long back in Purchasing view.. the corresponding Z field is created in table MARC..
How can i pass value to this Z field using BAPI.
i tried with BAPI_MARC.. my Z field is not coming in that structure.
Can anyone guide me how can this be achieved.
Thanks in Advance
Aravindh ManiHi,
The Function Module BAPI_MATERIAL_SAVEDATA has the options to pass the Z fields. There exits a structure parameters
EXTENSIONIN
EXTENSIONINX
in BPAI. In EXTENSIONIN pass the data and value part you can pass in EXTENSIONINX. So this will update the Z fileds in material
master . -
Hi experts,
I am new to bapi concept I done vendor creation by using bdc and lsmw and now I want to create by using bapi can anyone send program code for creating so that I can go through it.
thanks in advance,
points will be rewarded,
Srinivas.Dhi
I gone to the bapi function module for bapi_vendor_create etc but the problem their is no input parameters or tables so I am little bit of confused if any body has the code plz send me.
Regards,
SrinivasD -
I'm looking for a LSMW to upload the cost center from a xls-file or csv-file in the R/3 System. Which LSMW can I use for this?
hi
You can user recording method. In LSMW first step, select the radio button for recording option then record the tcode. It is easier than all others
Reward if it dose
Siva Kuamr -
Service order creation using bapi with repair order number
Hi experts,
Pls suggest me a BAPI to create a service order for those repair orders where a PGR has been done(for return delivery type : LR).
The plant should be 0260 with storage location wh01 and item category ZRRE
Creation of a service order with repair order type SM03 is not allowed in iw31.
thanks and regards,
Vijayb.Hi prakash,
Thank u for the BAPI
But an error is being displayed saying that the REFURBISHMENT ORDERS CANNOT BE PROCESSED USING BAPI.
ERROR DURING PROCESSING OF BAPI METHODS.
This is while u pass the order type as either ZM03 or SM01or SM02 or SM03.
pls help me on that.
thanks and regards,
Vijayb. -
Problem with Multiple record creation using BAPI BAPI_PRICES_CONDITION
Hi,
I am working on IS Media Sales And Distribution wherein i am using BAPI BAPI_PRICES_CONDITION for condition record creation in TCODE JC9B. I am able to create one record using this BAPI for one sales promotion but having problem while creation of multiple records for the same sales promotion wherein my internal table have multiple records. It gives me error that data in BAPICONDIT is missing.
I am aatching followig code for reference
BAPI have field of varkey which i am filling as combination of sales org. + distn channel + sales promotion + delivery type
In this varkey delivery type is changing for sales promotion Can be said that one sales promotion can have multiple delivery type .
Am i giving the correct varkey for each itration of internal table ?
I am attaching code for reference.
Here loop it_cond contain one promotion and multiple delivery type.
sales org distn ch promotion delivery
0100 01 zsalesprom 03
0100 01 zsalesprom z3
LOOP AT it_cond INTO wa_cond.
Get next condition number
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
nr_range_nr = '01'
object = 'KONH'
QUANTITY = '1'
SUBOBJECT = ' '
TOYEAR = '0000'
IGNORE_BUFFER = ' '
IMPORTING
number = number
QUANTITY =
RETURNCODE =
EXCEPTIONS
INTERVAL_NOT_FOUND = 1
NUMBER_RANGE_NOT_INTERN = 2
OBJECT_NOT_FOUND = 3
QUANTITY_IS_0 = 4
QUANTITY_IS_NOT_1 = 5
INTERVAL_OVERFLOW = 6
BUFFER_OVERFLOW = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Here i am concacating varkey for each new delivery
CLEAR : l_min,l_length,l_var.
CONCATENATE wa_cond-vkorg wa_cond-vtweg wa_cond-wrbakt INTO l_var.
l_length = STRLEN( l_var ).
IF l_var+14(2) IS INITIAL.
WRITE wa_cond-lifart TO L_VAR+14.
l_length = STRLEN( l_var ).
ENDIF.
W_LINE = W_LINE + 1.
*First table in BAPI
wa_bapicondct-operation = '009'.
wa_bapicondct-cond_usage = 'A'.
wa_bapicondct-table_no = '506'.
wa_bapicondct-applicatio = 'J0'.
wa_bapicondct-cond_type = 'RATE'.
wa_bapicondct-varkey = l_var.
wa_bapicondct-valid_to = wa_cond-datbi.
wa_bapicondct-valid_from = wa_cond-datab.
wa_bapicondct-cond_no = number. "
APPEND wa_bapicondct TO it_bapicondct.
*Second table in BAPI
wa_bapicondhd-operation = '009'.
wa_bapicondhd-cond_no = number.
wa_bapicondhd-cond_usage = 'A'.
wa_bapicondhd-table_no = '506'.
wa_bapicondhd-created_by = sy-uname.
wa_bapicondhd-creat_date = sy-datum.
wa_bapicondhd-applicatio = 'J0'.
wa_bapicondhd-cond_type = 'RATE'.
wa_bapicondhd-varkey = l_var.
wa_bapicondhd-valid_from = wa_cond-datab.
wa_bapicondhd-valid_to = wa_cond-datbi.
APPEND wa_bapicondhd TO it_bapicondhd.
*Third table in BAPI
wa_bapicondit-operation = '009'.
wa_bapicondit-cond_no = number.
wa_bapicondit-cond_count = wa_cond-cond_count.
wa_bapicondit-applicatio = 'J0'.
wa_bapicondit-cond_type = 'RATE'.
wa_bapicondit-calctypcon = 'C'.
wa_bapicondit-scaletype = 'A'.
wa_bapicondit-cond_value = wa_cond-kbetr.
wa_bapicondit-condcurr = wa_cond-konwa.
wa_bapicondit-promotion = wa_cond-wrbakt.
APPEND wa_bapicondit TO it_bapicondit.
*Fourth table in BAPI
wa_bapicondqs-operation = '009'.
wa_bapicondqs-cond_no = number.
wa_bapicondqs-cond_count = wa_cond-cond_count.
wa_bapicondqs-currency = wa_cond-kbetr.
wa_bapicondqs-condcurr = wa_cond-konwa.
wa_bapicondqs-cond_unit = 'EA'.
wa_bapicondqs-LINE_NO = W_LINE."'0001'.
APPEND wa_bapicondqs TO it_bapicondqs.
*Fifth table in BAPI
wa_bapicondvs-operation = '009'.
wa_bapicondvs-cond_no = number.
wa_bapicondvs-cond_count = wa_cond-cond_count.
wa_bapicondvs-currenckey = wa_cond-konwa.
wa_bapicondvs-currenciso = wa_cond-konwa.
wa_bapicondvs-currency = wa_cond-kbetr.
wa_bapicondvs-condcurr = wa_cond-konwa.
wa_bapicondvs-curren_iso = wa_cond-konwa.
wa_bapicondvs-LINE_NO = W_LINE."'0001'.
APPEND wa_bapicondvs TO it_bapicondvs.
CALL FUNCTION 'BAPI_PRICES_CONDITIONS'
EXPORTING
PI_INITIALMODE = ' '
PI_BLOCKNUMBER =
TABLES
ti_bapicondct = it_bapicondct
ti_bapicondhd = it_bapicondhd
ti_bapicondit = it_bapicondit
ti_bapicondqs = it_bapicondqs
ti_bapicondvs = it_bapicondvs
to_bapiret2 = it_bapiret2
to_bapiknumhs = it_bapiknumhs
to_mem_initial = it_cnd_mem_initial
EXCEPTIONS
update_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'
IMPORTING
RETURN =
CLEAR : wa_bapicondct,wa_bapicondhd,wa_bapicondvs,wa_bapicondqs.
CLEAR : wa_bapicondit.
ENDLOOP.
ENDIF.
ENDIF.
Kindly Suggest.
Thanks
ParagSolved By myself
There is problem while passing data to internal table for item level -
Error in standard network creation using BAPI
hi,
I need to create standard network using BAPI.
I am trying with BAPI_BUS2002_CREATE. As per the documentation, I need to call function BAPI_PS_INITIALIZATION. But, I am not able to get the required output since its giving me error.
Does anybody has used the same BAPI for standard network creation.
Regards,
UjjwalaHI,
How did u create standard network? If u used bapi, which bapi did u use??? -
How to update VBFA while sales order creation using BAPI
Hi,
I am trying to create sales orders for each schedule line items while inquiry creation.
This I have done in the user exit in the VA11 program MV45AFF using BAPI "BAPI_SALESORDER_CREATEFROMDAT2".
along with the Inquiry, Sales orders are also getting created. But I am facing 2 problems.
1) BAPI is not returning the sales order number to the program but when checked from SE37 it is returning the sales order
number.
2) It is not updating the VBFA (SD flow) table.
Regards,
Krishna.Hello,
1) BAPI is not returning the sales order number to the program but when checked from SE37 it is returning the sales order
number.
- are you passing simulation parameter (TESTRUN) as 'X'
2) It is not updating the VBFA (SD flow) table.
- Please use BAPI_SALESDOCUMENT_COPY for copying and updating VBFA table
Thanks
Krish
Maybe you are looking for
-
Word processing within a text component
Although this is a potentially great application, I am at present prevented from using it to create a website due to the lack, as far as I can determine, of any form of processing individual text within the text components e.g. making individual word
-
I had a clutter of files on my desktop so, I created a folder in User>Documents called Desktop Junk and put all the files from my desktop into it. Today I tried to open one of the files and couldn't because it was now an alias and had to be fixed in
-
I use a lot iTunes desktop podcast. Last weeks I have a lot of problems with this program. Podcasts episodes do not download as usual. I need to go to each podcast and click the icon to download. I have checked settings and they are "download on" (l
-
Create domain from command line failed in wls91
Hi, I am trying to create a simple domain from command line for wls91. It even didn't ask me the password. How can I do it? Thanks C:\testdomain>java weblogic.Server <Feb 23, 2006 9:11:50 AM PST> <Info> <WebLogicServer> <BEA-000377> <Starting Web Log
-
Hi, i need to scan a directory (resources) for files and if there are any files (there are!) - put all file names in a list. All works fine until I pack all class files and the resources dir in a jar file. I need to run the application packed as a ja