LSMW - inforecord / material master - syntax error when converting data
Hi all,
I used LSMW for classification uploads (material master, vendor master) so far - it was easy :-). But..I tried to create/update inforecords by object 0060, method 0000, program RM06IBI0. I declared source structure, source fields, field mappings and conversion rules (in my batch input I use only fields which we defined as required for infrecs.), files etc. LSMW reads the data but when I try Convert data - the is syntax error in program /1CADMC/SAP_LSMW_CONV_00000018 and dump with message "For type "C", a maximum length specification of 65535 is allowed." When I tried to create material master (object 0020, method 0000), Convert data command worked the same.
Any help would be appreciated. (? sample from your batch input file which works well to compare)
Tomas
Hi Tomas,
Please do me a favor. In the initial screen of LSMW, there is a pushbutton for 'Personal Menu'. Once you press that it will pop-up a screen with a bunch of checkboxes. Select the checkbox for 'Display Conversion Program' and press enter. Now you should see the 'Display Conversion Program' option in your initial screen. Select that and go into the conversion program. Put a break-point in the conversion program on the statement 'perform execute_data_conversion.'.
Debug it and find out exactly where the error is occuring. Perhaps that will help you figure out what the error is, if not, let the forum know where you hit the error. Even looking at the dump, you should get more information.
Srinivas
Similar Messages
-
Syntax error after convert data : LSMW
Hi,
I am doing a LSMW for MM01. After the convert data step I get the following syntax error:
The following syntax error was found in program
/1CADMC/SAP_LSMW_COMV_00000168
For typr "C", a max length specification of 65535 is allowed.
Can anybody help me in figuring out where I am going wrong.
Thanks,
Nileshjust execute ur lsmw in this, there is tab button user menu next to execute button , click on that , u come across a pop screen where u have a check box in that just select generate conversion program and display conversion program. and press enter.
afterwards select the radio button generate conversion program , it will shows the program in this do systax check. u will findout the error .
do syntax check by running step generate conversion programe,
and also check source fields step , r u giving correct length or not for each field.
Thanks
null -
HP Prime Syntax Error in Convert
Hello,
I have a new HP Prime Graph Calculator. My old 48G was dying on me, so decided to make the switch. It is so much different than what i am used to.
First Off, this is my HP Prime info :
Software Version : 2014 3 31 (6030)
Hardware Version : A
CAS Version : 1.1.0-46
One function i use alot on my 48G was converting units.
So I tried starting using Convert on my HP Prime and when i tried to convert i got a Syntax Error. Looked around in forums and at some place it said to update firware, which I did.
Now I get 2 errors. First when I press "Convert" I get a new error : Bad Argument Count
Then when I try to convert i get the same Syntax Error.
I think I know where the problem resides for the Syntax Error, when converting it should put the units in ( ) I think. But for some reason for lenght it does not, for other units it does (km2).
I tried the function on the Virtual Calculator on windows and on the virtual one everything works, but on my physical one, I still get the same 2 errors (even when the units are in ( ), without any results.
Can anyone help please ?
Thank you
This question was solved.
View Solution.Please let us know some examples of expressions that you tried, what you expected, and what happened instead. ALSO please let us know what modes your Prime is in (e.g. RPN Entry mode, or CAS view), because Prime behaves very differently depending on the Home Settings and CAS Settings. Which app is the currently active app (shown in the display's title bar) can also alter Prime's behavior. When you let us know these things, we'll be able to discern why you are getting syntax errors.
If I were a betting man, I'd wager a nickel that the problem is due to your Prime being in RPN mode. If so, you have to use RPN syntax, not algebraic syntax. Example: 5_ft, Enter, 1_in, Enter, CONVERT --> 60_in (just like on your HP 48). Do I win a nickel?
Disclaimer: I do not work for HP. I'm just another happy HP calculator user.
-Joe- -
Issue in LSMW for material master using standard input program RMDATIND!!
Hello guys,
I have a issue in LSMW for material master.
I have a custom field in MARA table. which I want to add in my LSMW.
I added the field in BMMH1 structure. I'm passing the value to this field, But it is not populated in the table when I run it.
Is there anything else I need to do apart from addition of field in the structure BMMH1.
Thanks in advance for your help.
Regards,
Sumeet....see oss note 44410, it gives you a step by step overview.
https://service.sap.com/sap/support/notes/44410 -
LSMW for material master upload
Hi gurus
i have one problem while uploading material master with LSMW.
I have murged 2 company codes in one so while creating material master system is asking me tax classification data in sales view for 2 country sales org and distrubition channel. I am using sap std LSMW for material master creation.
system is giving me error as " tax classification data not maintained completely".
need your valuable help to solve this problemTax classification data is mandatory field in Sales view of MM01.
Check out you mapping for the tax classification fields. usually classification value is 0 OR 1.
You can first test the values in MM01 Sales View with the legacy data you have and this way you will able to find the mandatory fields also and can see the valid values for the fields.
Remember you may have more than one Tax Classification values depending on the country code.
For that you can add those many columns in legacy data file and map them.
Hope it helps. -
Error when converting a numeric field to XML
Hi,
When i run the Adobe intractive form,i am getting following exception
"Error when converting a numeric field to XML"
Anyone plz suggest
Regards,
vinothHi Vinoth Raja,
For resolving the following exception
"Error when converting a numeric field to XML"
You have to follow the below link:-
http://www.saptechies.com/error-when-converting-numeric-field-xml/
May be it will help you
Regards,
Sushma Yadav -
Syntax error when creating a user-defined table type in SQL Server 2012
Why am I getting a syntax error when creating a user-defined table type in SQL Server 2014?
CREATE TYPE ReportsTableType AS TABLE
( reportId INT
, questionId INT
, questionOrder INT );
Results:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'AS'.Hope these posts could help,
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/37a45a9a-ed8c-4655-be93-f6e6d5ef44be/getting-incorrect-syntax-while-creating-a-table-type-in-sql-server-2008-r2?forum=transactsql
Regards, Dineshkumar,
Please Mark as Answer if my post answers your question and
Vote as Helpful if it helps you -
Error when converting a constant amount MAXBT in T511P
Dear Expert,
I am encounter error as below when run payroll for Macao,
Error when converting a constant amount MAXBT in T511P
CONVERT_TO_LOCAL_CURRENCY has been Called
Data used:
Validity end date: 28.02.2014
Constant: MAXBT
T511P Currency MOP
Currency of payroll driver HKD
Therefor, do the checking on OE00 and check the currency and validity dates for MOP currency.
Also, checked table V_T001 table the currency that assigned for the company code.
Checked the MOP currency and ISO code in V_TCURC table. And checked ISO code in V_CURC table as well.
Still encounter error as above, appreciate you advice.
Thanks,
MelWhat are the values for :
Country grouping for PA/PSA:
Currency appearing in IT0008:
Country key in IT0006:
Bank Country in IT0009: -
I have a table-valued function that run in sql 2005 and when try to execute in sql 2008 r2, return the next "Conversion failed when converting date and/or time from character string".
USE [Runtime]
GO
/****** Object: UserDefinedFunction [dbo].[f_Pinto_Graf_P_Opt] Script Date: 06/11/2013 08:47:47 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE FUNCTION [dbo].[f_Pinto_Graf_P_Opt] (@fechaInicio datetime, @fechaFin datetime)
-- Declaramos la tabla "@Produc_Opt" que será devuelta por la funcion
RETURNS @Produc_Opt table ( Hora datetime,NSACOS int, NSACOS_opt int)
AS
BEGIN
-- Crea el Cursor
DECLARE cursorHora CURSOR
READ_ONLY
FOR SELECT DateTime, Value FROM f_PP_Graficas ('Pinto_CON_SACOS',@fechaInicio, @fechaFin,'Pinto_PRODUCTO')
-- Declaracion de variables locales
DECLARE @produc_opt_hora int
DECLARE @produc_opt_parc int
DECLARE @nsacos int
DECLARE @time_parc datetime
-- Inicializamos VARIABLES
SET @produc_opt_hora = (SELECT * FROM f_Valor (@fechaFin,'Pinto_PRODUC_OPT'))
-- Abre y se crea el conjunto del cursor
OPEN cursorHora
-- Comenzamos los calculos
FETCH NEXT FROM cursorHora INTO @time_parc,@nsacos
/************ BUCLE WHILE QUE SE VA A MOVER A TRAVES DEL CURSOR ************/
WHILE (@@fetch_status <> -1)
BEGIN
IF (@@fetch_status = -2)
BEGIN
-- Terminamos la ejecucion
BREAK
END
-- REALIZAMOS CÁLCULOS
SET @produc_opt_parc = (SELECT dbo.f_P_Opt_Parc (@fechaInicio,@time_parc,@produc_opt_hora))
-- INSERTAMOS VALORES EN LA TABLA
INSERT @Produc_Opt VALUES (@time_parc,@nsacos, @produc_opt_parc)
-- Avanzamos el cursor
FETCH NEXT FROM cursorHora INTO @time_parc,@nsacos
END
/************ FIN DEL BUCLE QUE SE MUEVE A TRAVES DEL CURSOR ***************/
-- Cerramos el cursor
CLOSE cursorHora
-- Liberamos los cursores
DEALLOCATE cursorHora
RETURN
ENDYou can search the forums for that error message and find previous discussions - they all boil down to the same problem. Somewhere in your query that calls this function, the code invoked implicitly converts from string to date/datetime. In general,
this works in any version of sql server if the runtime settings are correct for the format of the string data. The fact that it works in one server and not in another server suggests that the query executes with different settings - and I'll assume for
the moment that the format of the data involved in this conversion is consistent within the database/resultset and consistent between the 2 servers.
I suggest you read Tibor's guide to the datetime datatype (via the link to his site below) first - then go find the actual code that performs this conversion. It may not be in the function you posted, since that function also executes other functions.
You also did not post the query that calls this function, so this function may not, in fact, be the source of the problem at all.
Tibor's site -
SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM ODPO AS T0 LEFT OUTER JOIN
VPM2 AS T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
OVPM AS T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
VPM1 AS T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate>='[%0]' and T0.DocDate<='[%1]'Hi,
Try this:
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM ODPO T0 LEFT OUTER JOIN
VPM2 T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry
LEFT OUTER JOIN
OVPM T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
VPM1 T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate >= '[%0]' and T0.DocDate <='[%1]'
group by T0.DocStatus,T0.DocDate ,
T0.DocNum ,
T0.NumAtCard,
T0.TransId ,
T0.Comments ,
T0.CardCode,
T0.CardName ,
T0.WTSum ,
T3.DueDate ,
T3.CheckSum
Thanks & Regards,
Nagarajan -
Error when converting time stamp in date time time zone CST in IC
Hi Experts,
We have recently upgraded from CRM 5.0 to CRM 2007. We are using IC WEB Employee interaction center.
so when agent create service ticket in interaction center and close the ticket on same day we are getting an error saying Error when converting time stamp in date time time zone CST.
we thought there may be problem while installing SAP CRM by basis team in time zone, but we did not find any problem.
So please advice how to resolve this issue.
Regards,
TejaHi Teja,
I saw a similar message, and it was resolved by adding a timezone to the user profile defaults tab in SU3. I believe the system has been configured to convert between users' timezone and the system timezone, therefore it needs to know each users' timezone.
Regards,
Simon. -
GR224 Report Painter: Internal error when converting a report
Hi
Using FAGL_RMIGR transaction I've trasferred report 8A3-0010 in a
custom library ZXX. The migration happened without error messages. I've
tryed then to run report FL3-0010 by GRR3 transaction but error message
GR224 appears
Report Painter: Internal error when converting a report
Message no. GR224
Diagnosis
During the internal compilation of a Report Painter report to a
Report Writer report, sets are generated. This caused an error in the
subprogramm GENERATE_ROW_MULTI. The return code was 7.
System Response
The report could not be generated and/or saved.
Procedure
Please call the SAP Hotline and send them this longtext as well as
detailed information describing the circumstances in which this
error
occured.
Please could you help me?
Thanks in advance
Giovanna ScamardellaHI,
SAPNET notes search with GR 224 brings some old (but maybe helpful) notes: 37611, 193392,137231, pls. check.
Best regards, Christian -
Hi,
Anybody can help me, how to make LSMW for Material master data.
Thanks in Advance
Arjunpls follow the thread:
http://help.sap.com/saphelp_46c/helpdata/en/f6/ca0766a7a911d1950500a0c930e0da/frameset.htm
regards,
indranil -
LSMW FOR MATERIAL MASTER USING BAPI_MATERIAL_SAVEDATA -Adding Custom Fields
Hi Gurus,
I'm developing LSMW for Material Master Upload using BAPI method.
Object:BUS1001006
BAPI:BAPI_MATERIAL_SAVEDATA
MESSAGE TYPE: MATMAS_BAPI
BASIC TYPE : MATMAS_BAPI03.
There is a requirement to use/map a custom field. Upon research custom field can be added to the parameter EXTENSIONIN and EXTENSIONINX, but I have no Idea on how to do it with LSMW. Please advise what approach is needed.
Thanks and Regards,
JayHi Gurus,
I got the following code below.
The custom field won't get updated.... Please advise on what should I do... I've checked different forums and still can't come up with the solution... Please advise..
REPORT ztest_extend_matmas1.
STRUCTURE
TABLES:
bapimathead, "Headerdata
bapi_mara, "Clientdata
bapi_marax, "Clientdatax
bapi_marc, "Plantdata
bapi_marcx, "Plantdatax
bapi_makt, "Material description
bapiparex, "Extensionstruktur
bapiparexx,
bapiret2. "Return messages
DATA:
bapi_te_mara LIKE bapi_te_mara,
bapi_te_marax LIKE bapi_te_marax,
v_file TYPE string.
INTERNAL TABLE
*to store the output data
DATA:BEGIN OF it_material_number OCCURS 0.
INCLUDE STRUCTURE bapimatinr.
DATA:END OF it_material_number.
*for materialtext
DATA:BEGIN OF it_materialdesc OCCURS 0.
INCLUDE STRUCTURE bapi_makt .
DATA:END OF it_materialdesc.
*für z-feld
DATA:BEGIN OF it_bapiparex OCCURS 0.
INCLUDE STRUCTURE bapiparex.
DATA:END OF it_bapiparex.
*für z-feldx
DATA:BEGIN OF it_bapiparexx OCCURS 0.
INCLUDE STRUCTURE bapiparexx.
DATA:END OF it_bapiparexx.
*to return messages
DATA:BEGIN OF it_return2 OCCURS 0.
INCLUDE STRUCTURE bapiret2.
DATA:END OF it_return2.
DATA:BEGIN OF it_return OCCURS 0.
INCLUDE STRUCTURE bapiret1.
DATA:END OF it_return.
DATA
lt_messages TYPE bapiret2_t.
PROCESSING
*bapimathead-material = it_material_number-material.
bapimathead-material = '100-2520'.
bapimathead-ind_sector = 'P'.
bapimathead-matl_type = 'AEM'.
bapimathead-basic_view = 'X'.
bapimathead-purchase_view = 'X'.
bapimathead-inp_fld_check = 'I'.
*bapimathead-BASIC_VIEW = 'X'.
*bapimathead-SALES_VIEW = 'X'.
*bapimathead-PURCHASE_VIEW = 'X'.
*bapimathead-MRP_VIEW = 'X'.
*bapimathead-FORECAST_VIEW = 'X'.
*bapimathead-WORK_SCHED_VIEW = 'X'.
*bapimathead-PRT_VIEW = 'X'.
*bapimathead-STORAGE_VIEW = 'X'.
*bapimathead-WAREHOUSE_VIEW = 'X'.
bapi_mara-matl_group = '0001'.
bapi_mara-old_mat_no = '100-251'.
bapi_mara-base_uom = 'ST'.
bapi_marax-matl_group = 'X'.
bapi_marax-old_mat_no = 'X'.
bapi_marax-base_uom = 'X'.
bapi_marc-plant = '1000'.
bapi_marcx-plant = '1000'.
it_materialdesc-langu = 'EN'.
it_materialdesc-matl_desc = 'DESC'.
APPEND it_materialdesc.
*bapi_te_mara-material = it_material_number-material.
bapimathead-material = '100-2520'.
*bapi_te_mara-zzforst = '4148'.
bapi_te_mara-material = '100-2520'.
bapi_te_mara-zzmar_field1 = '4148'.
*bapi_te_marax-material = it_material_number-material.
bapimathead-material = '100-2520'.
*bapi_te_marax-zzforst = 'X'.
bapi_te_marax-material = '100-2520'.
bapi_te_marax-zzmar_field1 = 'X'.
it_bapiparex-structure = 'BAPI_TE_MARA'.
it_bapiparex-valuepart1 = bapi_te_mara.
APPEND it_bapiparex.
it_bapiparexx-structure = 'BAPI_TE_MARAX'.
it_bapiparexx-valuepart1 = bapi_te_marax.
APPEND it_bapiparexx.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = bapimathead
clientdata = bapi_mara
clientdatax = bapi_marax
plantdata = bapi_marc
plantdatax = bapi_marcx
IMPORTING
return = it_return2
TABLES
materialdescription = it_materialdesc
extensionin = it_bapiparex
extensioninx = it_bapiparexx
returnmessages = lt_messages.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
THanks and Regards,
Jay
Edited by: jhayyy on May 17, 2011 6:54 AM -
LSMW FOR MATERIAL MASTER USING BAPI_MATERIAL_SAVEDATA
Hi Gurus,
Im trying to develop lsmw for material master upload using bapi method.
Object:BUS1001006
BAPI:BAPI_MATERIAL_SAVEDATA
MESSAGE TYPE: MATMAS_BAPI
BASIC TYPE : MATMAS_BAPI01.
I m unable to find parameters to load gross_weight volume and volume unit and also problem loading the custom fields of material master. Any body who has worked on this one, can you please help me.
Thanks
venkatThe BAPI_MATERAIL_SAVEDATA support the gross_weight or the volume via the tables UNITSOFMEASURE and UNITSOFMEASUREX.
eg.
UNIT_OF_WT =KG
ALT_UNIT = PCS
NUMERATOR = 1
DENOMINATR =1
GROSS_WT =1000
All the customer specific field are supported by the EXTENSIONIN and EXTENSIONINX tables.
Maybe you are looking for
-
I can no longer select multiple addresses from my Mail address book when forwarding emails
Since updating to Mavericks I cannot select multiple addresses from my address book when forwarding emails. I can select them individually using the + sign in the address bar but cannot select any when I open my Contact list as I have done with previ
-
Number range query causes repeated scan by index
I have a query that seems to repeatedly call an index scan on a table for reasons I'm not sure about. Anyone know why it would be doing the index scan on totaldwellingarea in the dimensions table (DIMEN_PID_TDWELLAREA) repeatedly? This only seems to
-
Hi All, I am facing the problem with leading zeros.I am getting the value for the field ZZMATNR is '00000000000000000000000000000000000000000000000000358934'.But user is expecting the value '0358934'. I used the function module 'CONVERSION_EXIT_A
-
Hello Ihope you can help me with this doubt If I modified a file of my itunes librery that I already have in macth the information in match will updated? Thanks
-
Re: Bridge CS3 not quitting
I've had my mac for two-and-a-half years and never had a problem getting an application to quit. So, for anyone else who is having such a problem: Apple icon > Force Quit. This finally got the Bridge CS3 to go away.