LSMW - Update Material master
Hi ,
WHILE UPDATING THE EXISTING VIEW WITH NEW FIELDS IN MM02,i am passing the values only for the updated fields, at that time it is updating the existing values as blank values.
And while adding the new views in the MM01 it is updating the values in the MARA MARC tables but those views i have added are not diplaing in the MM03 Tcode while in disply mode.
Can any body please give the solution for this...
Regards,
Rajesh.
Hi,
are you checking the material exists or not in the BEGIN_OF_RECORD of field mappings ?
4-character transaction
SELECT SINGLE MATNR
INTO V_MATNR
FROM MARA
WHERE MATNR = MATMAS_MRPVIEW-MATNR
IF SY-SUBRC = 0.
BMM00-TCODE = 'MM01'.
ELSE.
BMM00-TCODE = 'MM02'.
ENDIF.
i believe you given it already. but check it again.
regards
srikanth
Similar Messages
-
LSMW FOR MATERIAL MASTER USING BAPI_MATERIAL_SAVEDATA -Adding Custom Fields
Hi Gurus,
I'm developing LSMW for Material Master Upload using BAPI method.
Object:BUS1001006
BAPI:BAPI_MATERIAL_SAVEDATA
MESSAGE TYPE: MATMAS_BAPI
BASIC TYPE : MATMAS_BAPI03.
There is a requirement to use/map a custom field. Upon research custom field can be added to the parameter EXTENSIONIN and EXTENSIONINX, but I have no Idea on how to do it with LSMW. Please advise what approach is needed.
Thanks and Regards,
JayHi Gurus,
I got the following code below.
The custom field won't get updated.... Please advise on what should I do... I've checked different forums and still can't come up with the solution... Please advise..
REPORT ztest_extend_matmas1.
STRUCTURE
TABLES:
bapimathead, "Headerdata
bapi_mara, "Clientdata
bapi_marax, "Clientdatax
bapi_marc, "Plantdata
bapi_marcx, "Plantdatax
bapi_makt, "Material description
bapiparex, "Extensionstruktur
bapiparexx,
bapiret2. "Return messages
DATA:
bapi_te_mara LIKE bapi_te_mara,
bapi_te_marax LIKE bapi_te_marax,
v_file TYPE string.
INTERNAL TABLE
*to store the output data
DATA:BEGIN OF it_material_number OCCURS 0.
INCLUDE STRUCTURE bapimatinr.
DATA:END OF it_material_number.
*for materialtext
DATA:BEGIN OF it_materialdesc OCCURS 0.
INCLUDE STRUCTURE bapi_makt .
DATA:END OF it_materialdesc.
*für z-feld
DATA:BEGIN OF it_bapiparex OCCURS 0.
INCLUDE STRUCTURE bapiparex.
DATA:END OF it_bapiparex.
*für z-feldx
DATA:BEGIN OF it_bapiparexx OCCURS 0.
INCLUDE STRUCTURE bapiparexx.
DATA:END OF it_bapiparexx.
*to return messages
DATA:BEGIN OF it_return2 OCCURS 0.
INCLUDE STRUCTURE bapiret2.
DATA:END OF it_return2.
DATA:BEGIN OF it_return OCCURS 0.
INCLUDE STRUCTURE bapiret1.
DATA:END OF it_return.
DATA
lt_messages TYPE bapiret2_t.
PROCESSING
*bapimathead-material = it_material_number-material.
bapimathead-material = '100-2520'.
bapimathead-ind_sector = 'P'.
bapimathead-matl_type = 'AEM'.
bapimathead-basic_view = 'X'.
bapimathead-purchase_view = 'X'.
bapimathead-inp_fld_check = 'I'.
*bapimathead-BASIC_VIEW = 'X'.
*bapimathead-SALES_VIEW = 'X'.
*bapimathead-PURCHASE_VIEW = 'X'.
*bapimathead-MRP_VIEW = 'X'.
*bapimathead-FORECAST_VIEW = 'X'.
*bapimathead-WORK_SCHED_VIEW = 'X'.
*bapimathead-PRT_VIEW = 'X'.
*bapimathead-STORAGE_VIEW = 'X'.
*bapimathead-WAREHOUSE_VIEW = 'X'.
bapi_mara-matl_group = '0001'.
bapi_mara-old_mat_no = '100-251'.
bapi_mara-base_uom = 'ST'.
bapi_marax-matl_group = 'X'.
bapi_marax-old_mat_no = 'X'.
bapi_marax-base_uom = 'X'.
bapi_marc-plant = '1000'.
bapi_marcx-plant = '1000'.
it_materialdesc-langu = 'EN'.
it_materialdesc-matl_desc = 'DESC'.
APPEND it_materialdesc.
*bapi_te_mara-material = it_material_number-material.
bapimathead-material = '100-2520'.
*bapi_te_mara-zzforst = '4148'.
bapi_te_mara-material = '100-2520'.
bapi_te_mara-zzmar_field1 = '4148'.
*bapi_te_marax-material = it_material_number-material.
bapimathead-material = '100-2520'.
*bapi_te_marax-zzforst = 'X'.
bapi_te_marax-material = '100-2520'.
bapi_te_marax-zzmar_field1 = 'X'.
it_bapiparex-structure = 'BAPI_TE_MARA'.
it_bapiparex-valuepart1 = bapi_te_mara.
APPEND it_bapiparex.
it_bapiparexx-structure = 'BAPI_TE_MARAX'.
it_bapiparexx-valuepart1 = bapi_te_marax.
APPEND it_bapiparexx.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = bapimathead
clientdata = bapi_mara
clientdatax = bapi_marax
plantdata = bapi_marc
plantdatax = bapi_marcx
IMPORTING
return = it_return2
TABLES
materialdescription = it_materialdesc
extensionin = it_bapiparex
extensioninx = it_bapiparexx
returnmessages = lt_messages.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
THanks and Regards,
Jay
Edited by: jhayyy on May 17, 2011 6:54 AM -
Using the APD to update material master in CRM
Does anybody know if it is possible to update material master records in CRM from BW using the Analyses Process Designer with target CRM?
I would prefer to know this before creating a custom data target adapter in the CRM SPRO, writing all the required function modules and then finding out that it does not work.
Thanks,
József.Which direction??
Inbound/Outbound
Inbound : IDOC_INPUT_MATMAS01 -
Issue in LSMW for material master using standard input program RMDATIND!!
Hello guys,
I have a issue in LSMW for material master.
I have a custom field in MARA table. which I want to add in my LSMW.
I added the field in BMMH1 structure. I'm passing the value to this field, But it is not populated in the table when I run it.
Is there anything else I need to do apart from addition of field in the structure BMMH1.
Thanks in advance for your help.
Regards,
Sumeet....see oss note 44410, it gives you a step by step overview.
https://service.sap.com/sap/support/notes/44410 -
Hi,
Anybody can help me, how to make LSMW for Material master data.
Thanks in Advance
Arjunpls follow the thread:
http://help.sap.com/saphelp_46c/helpdata/en/f6/ca0766a7a911d1950500a0c930e0da/frameset.htm
regards,
indranil -
LSMW for material master upload
Hi gurus
i have one problem while uploading material master with LSMW.
I have murged 2 company codes in one so while creating material master system is asking me tax classification data in sales view for 2 country sales org and distrubition channel. I am using sap std LSMW for material master creation.
system is giving me error as " tax classification data not maintained completely".
need your valuable help to solve this problemTax classification data is mandatory field in Sales view of MM01.
Check out you mapping for the tax classification fields. usually classification value is 0 OR 1.
You can first test the values in MM01 Sales View with the legacy data you have and this way you will able to find the mandatory fields also and can see the valid values for the fields.
Remember you may have more than one Tax Classification values depending on the country code.
For that you can add those many columns in legacy data file and map them.
Hope it helps. -
LSMW FOR MATERIAL MASTER USING BAPI_MATERIAL_SAVEDATA
Hi Gurus,
Im trying to develop lsmw for material master upload using bapi method.
Object:BUS1001006
BAPI:BAPI_MATERIAL_SAVEDATA
MESSAGE TYPE: MATMAS_BAPI
BASIC TYPE : MATMAS_BAPI01.
I m unable to find parameters to load gross_weight volume and volume unit and also problem loading the custom fields of material master. Any body who has worked on this one, can you please help me.
Thanks
venkatThe BAPI_MATERAIL_SAVEDATA support the gross_weight or the volume via the tables UNITSOFMEASURE and UNITSOFMEASUREX.
eg.
UNIT_OF_WT =KG
ALT_UNIT = PCS
NUMERATOR = 1
DENOMINATR =1
GROSS_WT =1000
All the customer specific field are supported by the EXTENSIONIN and EXTENSIONINX tables. -
Updating Material Master Moving Average Price using BAPI
Hi,
We need to create a program using which we can update material master moving average price for a specific material.
For this we are using BAPI_MATERIAL_SAVEDATA.
when we are executing this bapi with inputs, it is showing data updated or created but when we are checking it in MAterial Master the data (MOving Price ) is not getting updated.
Please advise,
Thanks.I am trying to use BAPI_MATVAL_PRICE_CHANGE to change the price of a material in material master
(The moving average price [MAP] in Accounting View 1)
Using the BAPI, I enter
--> RFC target are
-> Material No.
-> Valuation Area
--> Prices table (I enter the new price that i want)
when I run the BAPI, i get error message (This can be seen in the returns table)
ID --> CKMLSENDPRICE
MESSAGE NUMBER --> 701
DETAILS --> No customizing data for Valuation Area XXXX found
PLease advise. -
Updating Material master purchase order text -LSMW
Dear Experts
How can update Purchase order Text through LSMW, while am doing recording system is not recording this field from material master
Regards
Ajeesh.sDear Expert
Please throw some light on this issue
Regards
Ajeesh.s -
LSMW - inforecord / material master - syntax error when converting data
Hi all,
I used LSMW for classification uploads (material master, vendor master) so far - it was easy :-). But..I tried to create/update inforecords by object 0060, method 0000, program RM06IBI0. I declared source structure, source fields, field mappings and conversion rules (in my batch input I use only fields which we defined as required for infrecs.), files etc. LSMW reads the data but when I try Convert data - the is syntax error in program /1CADMC/SAP_LSMW_CONV_00000018 and dump with message "For type "C", a maximum length specification of 65535 is allowed." When I tried to create material master (object 0020, method 0000), Convert data command worked the same.
Any help would be appreciated. (? sample from your batch input file which works well to compare)
TomasHi Tomas,
Please do me a favor. In the initial screen of LSMW, there is a pushbutton for 'Personal Menu'. Once you press that it will pop-up a screen with a bunch of checkboxes. Select the checkbox for 'Display Conversion Program' and press enter. Now you should see the 'Display Conversion Program' option in your initial screen. Select that and go into the conversion program. Put a break-point in the conversion program on the statement 'perform execute_data_conversion.'.
Debug it and find out exactly where the error is occuring. Perhaps that will help you figure out what the error is, if not, let the forum know where you hit the error. Even looking at the dump, you should get more information.
Srinivas -
Classification view creation via LSMW for Material master
Hi,
We are planning to have an LSMW for creation of material master along with classification view for configurable materials.
Though we see a flag to indicate classification view - XEIC1 Indicator: take Classification view into account
We do not see a structure where in we can pass all the characteristics and the corresponding values.
Is this something possible only with BAPIs such as -> BAPI_OBJCL_CREATE after creation of other view for that material.
Regards,
HRHi,
Thanks for the response. This is helpful.
However, we were intending to use a single LSMW for creation of all views of material master including classification view. Right now we are using Program RMDATIND as direct input method in LSMW.
Please let me know if there is a way to use single LSMW for creation of all views of material master.
Thanks
HR
Edited by: Hema Rao on Jan 8, 2009 7:58 AM -
Update material master data BAPI_MATERIAL_SAVE DATA
Hi All,
I am using BAPI_MATERIAL_SAVE DATA Fm to update the material master data .
I want to change material type vend (which already existed) to HIBE material type .
Even though Basic data view populated its not updating in Material master .
Which views do i need to populate to change material type one value to other value?if you use FM - BAPI_MATERIAL_SAVE DATA ,you can not update material type , use bdc program to update material type ,
See the transaction : MMAM - No BAPI to update material type
you need to use BDC Program.
Reward Points if it is helpful
Thanks
Seshu -
LSMW--Create Material master data
Hi,
When I use LSMW to create material master data, I set up all step, but when I go to last step "13 Run Batch Input Session", there is error message like "Select at least one view" in moudle SAPLMGMM, screen 0070, anybody can tell me what is problem, thanks a lot.Hi,
This is due to error while recording for MM01,
Please do a Repeat recording and ensure that once the material number, industry sector and material type is entered, on the next screen you need to select all or at least a single view to create the MMR.
Regards
Merwyn -
LSMW datamigration material master with multiple distribution channels
Hi,
We plan on using the LSMW to migrate our customer's material master to a ECC 6.0 system.
Currently we use the BMM00 and BMMH1 structures, but there I can specify only one distribution channel.
Does anyone know how to include multiple distribution channels in LSMW material master migration?
Thanks in advance for your support.
Edited by: Mohammed Qasim Malik on Jan 21, 2008 10:01 AMyou need an extra record in your source per distibution channel.
Alternative you can create the extra record with a small Abap code in LSMW in section __END_OF_RECORD__
There you habe in standard the code:
transfer_record.
just add after this statement a statement that gets the additional wanted distribution channel into the distribution channel field.
BMM00-VTWEG = 'xx'.
transfer_record. -
Bapi or Function Module to update Material Master Data
Hi Friends,
could anyone let me know any BAPI's or Function Modules for Material Master UPdate.
Thanks in Advance
Regards
Tinahi Tina,
check this BAPi BAPI_MATERIAL_SAVEDATA to create and change the material master .
Try ....
BAPI_MATERIAL_SAVEDATA
REPORT Z_BAPI_MAT.
STRUCTURE DECLARATIONS *
TABLES: BAPIMATHEAD, "Headerdata
BAPI_MARA, "Clientdata
BAPI_MARAX, "Clientdatax
BAPI_MARC, "Plantdata
BAPI_MARCX, "Plantdatax
BAPI_MAKT, "Material description
BAPIRET2. "Return messages
DATA:V_FILE TYPE STRING.
DATA:
BEGIN OF LSMW_MATERIAL_MASTER,
MATNR(018) TYPE C, "Material number
MTART(004) TYPE C, "Material type
MBRSH(001) TYPE C, "Industry sector
WERKS(004) TYPE C, "Plant
MAKTX(040) TYPE C, "Material description
DISMM(002) TYPE C, "Extra Field Added In the Program as itsrequired
MEINS(003) TYPE C, "Base unit of measure
MATKL(009) TYPE C, "Material group
SPART(002) TYPE C, "Division
LABOR(003) TYPE C, "Lab/office
PRDHA(018) TYPE C, "Product hierarchy
MSTAE(002) TYPE C, "X-plant matl status
MTPOS_MARA(004) TYPE C, "Gen item cat group
BRGEW(017) TYPE C, "Gross weight
GEWEI(003) TYPE C, "Weight unit
NTGEW(017) TYPE C, "Net weight
GROES(032) TYPE C, "Size/Dimensions
MAGRV(004) TYPE C, "Matl grp pack matls
BISMT(018) TYPE C, "Old material number
WRKST(048) TYPE C, "Basic material
PROFL(003) TYPE C, "DG indicator profile
KZUMW(001) TYPE C, "Environmentally rlvt
BSTME(003) TYPE C, "Order unit
VABME(001) TYPE C,
EKGRP(003) TYPE C, "Purchasing group
XCHPF(001) TYPE C, "Batch management
EKWSL(004) TYPE C, "Purchasing key value
WEBAZ(003) TYPE C, "GR processing time
MFRPN(040) TYPE C, "Manufacturer part number
MFRNR(010) TYPE C, "Manufacturer number
VPRSV(001) TYPE C, "Price control indicator
STPRS(015) TYPE C, "Standard price
BWPRH(014) TYPE C, "Commercial price1
BKLAS(004) TYPE C, "Valuation class
END OF LSMW_MATERIAL_MASTER.
INTERNAL TABLE DECLARATIONS *
*to store the input data
DATA:
BEGIN OF it_matmaster OCCURS 0.
INCLUDE STRUCTURE LSMW_MATERIAL_MASTER.
DATA:
END OF it_matmaster.
*for material description
DATA:BEGIN OF IT_MATERIALDESC OCCURS 0.
INCLUDE STRUCTURE BAPI_MAKT .
DATA:END OF IT_MATERIALDESC.
*to return messages
DATA:BEGIN OF IT_RETURN OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA:END OF IT_RETURN.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-002.
PARAMETERS:P_FILE LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1 .
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = P_FILE.
TO UPLOAD THE DATA *
START-OF-SELECTION.
V_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = V_FILE
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = IT_MATMASTER
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA POPULATIONS *
LOOP AT IT_MATMASTER.
BAPIMATHEAD-MATERIAL = IT_MATMASTER-MATNR.
BAPIMATHEAD-IND_SECTOR = IT_MATMASTER-Mbrsh.
BAPIMATHEAD-MATL_TYPE = IT_MATMASTER-Mtart.
BAPIMATHEAD-BASIC_VIEW = 'X'.
BAPIMATHEAD-PURCHASE_VIEW = 'X'.
BAPIMATHEAD-ACCOUNT_VIEW = 'X'.
BAPI_MARA-MATL_GROUP = IT_MATMASTER-MATKL.
BAPI_MARA-OLD_MAT_NO = IT_MATMASTER-BISMT.
BAPI_MARA-BASE_UOM = IT_MATMASTER-MEINS.
BAPI_MARA-BASIC_MATL = IT_MATMASTER-WRKST.
BAPI_MARA-MFR_NO = IT_MATMASTER-MFRNR.
BAPI_MARAX-MATL_GROUP = 'X'.
BAPI_MARAX-OLD_MAT_NO = 'X'.
BAPI_MARAX-BASE_UOM = 'X'.
BAPI_MARAX-BASIC_MATL = 'X'.
BAPI_MARAX-MFR_NO = 'X'.
BAPI_MARC-PLANT = IT_MATMASTER-WERKS.
BAPI_MARC-PUR_GROUP = IT_MATMASTER-EKGRP.
BAPI_MARCX-PLANT = IT_MATMASTER-WERKS.
BAPI_MARCX-PUR_GROUP = 'X'.
IT_MATERIALDESC-LANGU = 'EN'.
IT_MATERIALDESC-MATL_DESC = IT_MATMASTER-MAKTX.
append IT_materialdesc.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = BAPIMATHEAD
CLIENTDATA = BAPI_MARA
CLIENTDATAX = BAPI_MARAx
PLANTDATA = BAPI_MARc
PLANTDATAX = BAPI_MARcx
FORECASTPARAMETERS =
FORECASTPARAMETERSX =
PLANNINGDATA =
PLANNINGDATAX =
STORAGELOCATIONDATA =
STORAGELOCATIONDATAX =
VALUATIONDATA =
VALUATIONDATAX =
WAREHOUSENUMBERDATA =
WAREHOUSENUMBERDATAX =
SALESDATA =
SALESDATAX =
STORAGETYPEDATA =
STORAGETYPEDATAX =
FLAG_ONLINE = ' '
FLAG_CAD_CALL = ' '
IMPORTING
RETURN = IT_RETURN
TABLES
MATERIALDESCRIPTION = IT_MATERIALDESC
UNITSOFMEASURE =
UNITSOFMEASUREX =
INTERNATIONALARTNOS =
MATERIALLONGTEXT =
TAXCLASSIFICATIONS =
RETURNMESSAGES =
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
WRITE:/ IT_RETURN-TYPE,
2 IT_RETURN-ID,
22 IT_RETURN-NUMBER,
25 IT_RETURN-MESSAGE.
IT_RETURN-LOG_NO,
IT_RETURN-LOG_MSG_NO,
IT_RETURN-MESSAGE_V1,
IT_RETURN-MESSAGE_V2,
IT_RETURN-MESSAGE_V3,
IT_RETURN-MESSAGE_V4,
IT_RETURN-PARAMETER,
IT_RETURN-ROW,
IT_RETURN-FIELD,
IT_RETURN-SYSTEM.
ENDLOOP.
Regards,
Naveen
Maybe you are looking for
-
Interest calculation on A/R Receivables
Dear Experts, While doing Account determination in the T.code OBV1 I am not getting new line items to assign the new currency and the G/L Account. In order to add i have checked in the menu GOTO--- Accounts, but for me it is disabled. Please tell me
-
Is there a way to prevent iCloud from duplicating songs downloaded if I manually sync my iPhone with my PC?
-
Purchase Order Error in account assignment
Hi all, I am running SRM 7.0 Extended Classic scenario for the creation of purchase orders. Purchase Orders are correctly created in SRM and passed to ECC in our DEV system. But in our QAS system we are getting the following error in SRM Purchase Ord
-
SAP report with sales (invoices) and cost of goods sold
Is there standard SAP report that would show list of invoices, the materials sold, and the cost of goods sold (for how much they were bought)?
-
Vendor return incase of Import Procurement
In my case comapny procuring material of 10 kg from germany and out of that 2 kg are damaged comletely.Since we are not sending material back to vendor due to may be frieght cost. Plz suggest me how can i go for availing credit of excise duties where